e3245f2e7b Removes Boost predicate.hpp dependency (251)
Pull request description:
This pull request removes the `boost/algorithm/string/predicate.hpp` dependency from the project.
To replace the the `predicate.hpp` dependency from the project the function calls to `boost::algorithm::starts_with` and `boost::algorithm::ends_with` have been replaced with respectively C++11's `std::basic_string::front` and `std::basic_string::back` function calls.
Refactors that were not required, but have been done anyways:
- The Boost function `all` was implicitly made available via the `predicate.hpp` header. Instead of including the appropriate header, function calls to `all` have been replaced with function calls to `std::all_of`.
- The `boost::algorithm::is_digit` predicate has been replaced with a custom `IsDigit` function that is locale independent and ASCII deterministic.
Tree-SHA512: 22dda6adfb4d7ac0cabac8cc33e8fb8330c899805acc1ae4ede402c4b11ea75a399414b389dfaa3650d23b47f41351b4650077af9005d598fbe48d5277bdc320
232f96f5c8 doc: Add release notes for -avoidpartialspends (Karl-Johan Alm)
e00b4699cc clean-up: Remove no longer used ivars from CInputCoin (Karl-Johan Alm)
43e04d13b1 wallet: Remove deprecated OutputEligibleForSpending (Karl-Johan Alm)
0128121101 test: Add basic testing for wallet groups (Karl-Johan Alm)
59d6f7b4e2 wallet: Switch to using output groups instead of coins in coin selection (Karl-Johan Alm)
87ebce25d6 wallet: Add output grouping (Karl-Johan Alm)
bb629cb9dc Add -avoidpartialspends and m_avoid_partial_spends (Karl-Johan Alm)
65b3eda458 wallet: Add input bytes to CInputCoin (Karl-Johan Alm)
a443d7a0ca moveonly: CoinElegibilityFilter into coinselection.h (Karl-Johan Alm)
173e18a289 utils: Add insert() convenience templates (Karl-Johan Alm)
Pull request description:
This PR adds an optional (off by default) `-avoidpartialspends` flag, which changes coin select to use output groups rather than outputs, where each output group corresponds to all outputs with the same destination.
It is a privacy improvement, as each time you spend some output, any other output that is publicly associated with the destination (address) will also be spent at the same time, at the cost of fee increase for cases where coin select without group restriction would find a more optimal set of coins (see example below).
For regular use without address reuse, this PR should have no effect on the user experience whatsoever; it only affects users who, for some reason, have multiple outputs with the same destination (i.e. address reuse).
Nodes with this turned off will still try to avoid partial spending, if the fee of the resulting transaction is not greater than the fee of the original transaction.
Example: a node has four outputs linked to two addresses `A` and `B`:
* 1.0 btc to `A`
* 0.5 btc to `A`
* 1.0 btc to `B`
* 0.5 btc to `B`
The node sends 0.2 btc to `C`. Without `-avoidpartialspends`, the following coin selection will occur:
* 0.5 btc to `A` or `B` is picked
* 0.2 btc is output to `C`
* 0.3 - fee is output to (unique change address)
With `-avoidpartialspends`, the following will instead happen:
* Both of (0.5, 1.0) btc to `A` or `B` is picked (one or the other pair)
* 0.2 btc is output to `C`
* 1.3 - fee is output to (unique change address)
As noted, the pro here is that, assuming nobody sends to the address after you spend from it, you will only ever use one address once. The con is that the transaction becomes slightly larger in this case, because it is overpicking outputs to adhere to the no partial spending rule.
This complements #10386, in particular it addresses @luke-jr and @gmaxwell's concerns in https://github.com/bitcoin/bitcoin/pull/10386#issuecomment-300667926 and https://github.com/bitcoin/bitcoin/pull/10386#issuecomment-302361381.
Together with `-avoidreuse`, this fully addresses the concerns in #10065 I believe.
Tree-SHA512: 24687a4490ba59cf4198ed90052944ff4996653a4257833bb52ed24d058b3e924800c9b3790aeb6be6385b653b49e304453e5d7ff960e64c682fc23bfc447621
84547fa6d4 Avoid creating a temporary vector for size-prefixed elements (Pieter Wuille)
Pull request description:
This is a simple improvement to the PSBT serialization code, avoiding the need for temporary vectors everywhere.
Tree-SHA512: 9f7243b7169ec8ba00ffad31af03c016ab84e4f76ebac810167f91f5e8008f3827ad59fbcee0cb2bd2334fc26466eb222404af24e7fb6ec040fd78229ebe0fd1
fa451511a1 doc: Adjust bitcoincore.org links (MarcoFalke)
Pull request description:
Minor adjustments to our https://bitcoincore.org/ links:
Mainly adding links of the Bitcoin Core Github mirror and Bitcoin Core website to the doxygen introduction. (See e.g. current master: https://dev.visucore.com/bitcoin/doxygen/index.html). Also removing the link to bitcoin.org, to not imply there is only one resource that educates about bitcoin.
Tree-SHA512: d4d50f6de4d4b412203934e947889ebc0f564747e26f9190a2cff64234bf9fc3d56b8f056651550ce568170fba448559fa005959ef4e504d990e2fbc96a2ed77
Because false is synonymous with TX_NONSTANDARD, this conveys the same
information and makes the handling explicitly based on script type,
simplifying each call site.
Prior to this change it was common for the return value to be ignored,
or for the return value and TX_NONSTANDARD to be redundantly handled.
This is a squashed commit that squashes the following commits:
This commit removes the `boost/algorithm/string/predicate.hpp` dependenc
from the project by replacing the function calls to `boost::algorithm::starts_with`
`boost::algorithm::ends_with` and `all` with respectively C++11'
`std::basic_string::front`, `std::basic_string::back`, `std::all_of` function calls
This commit replaces `boost::algorithm::is_digit` with a locale independent isdigi
function, because the use of the standard library's `isdigit` and `std::isdigit
functions is discoraged in the developer notes
0454b56d8a trivial: remove unneeded include (Nikolay Mitev)
Pull request description:
Remove dead include
Tree-SHA512: 66380fe25259d37a19f955142ad53da24d4927064a84249989f54bebc21d9d688236fb60979acc79f219b05692c4c73b3ebab0872b8d03ab2447b0b44a06c8ed
793290f940 Net: Fixed a race condition when disabling the network. (lmanners)
Pull request description:
This change addresses a race condition where setnetworkactive=false wouldn't always disconnect all peers.
Before this change, the following could happen:
1. Thread A -- Begins connecting to a node.
2. Thread B -- Sets kNetworkActive=false and disconnects connected nodes.
3. Thread A -- Finishes connecting and adds node to list of connected nodes.
The node that was connected from Thread A remains connected and active,
even though kNetworkActive=false.
To fix the race, disconnections when kNetworkActive=false are now handled in the main network loop.
fixes#13038
Tree-SHA512: 6d0b7a78ae956358e796efcc034cb532c2e0d824a52ae822a3899eefc7df76327519d1f2d77362c9fddf34ef860abd095d7490d7cc02d0ba7543bf1e8c8f2535
5617840392 Drop dead code from Stacks (Ben Woosley)
Pull request description:
Stacks is local to this file, and only used in DataFromTransaction, so
it's easy to confirm this code is unused.
Tree-SHA512: cc680c99f9b31cb56db70f453087d642f83906ce594c07a6bf3e61427cfbee41441495d440b240419ba3386582cf0670c0999b2f51e7fd56b00e0a0f3f618845
9544a3f3fc tiny refactor for ArgsManager (AtsukiTak)
Pull request description:
This PR contains some small refactors for `ArgsManager`.
1. Mark `const` on member function if it possible.
2. Remove unused `error` argument from `ArgsManager::IsArgKnown`.
I'm not sure whether these refactors should be separated into another PR. If so, I will do that.
Tree-SHA512: 7df09e7f7c4cdd2e7cd60e34137faa7ca7463be66490f8552fdea3656da6ccc98886e258bdeef21820d197fc2fde06ab2d3405205f5de53f258df7c191d206b0
01a06d6686 Avoid locking mutexes that are already held by the same thread (practicalswift)
Pull request description:
Avoid locking mutexes that are already held by the same thread. These are reentrant mutexes, but still no need to lock them more than once per thread :-)
Tree-SHA512: e2fb85882e8800892fd8e8170f3c13128d6acfeb14d7b69fb9555f2b7ad0884fb201cf945b8144ffaf6fb1253c28af7c8c6c435319a7ae30ca003f28aa645a98
ac8a1d092e [RPC] Remove field in getblocktemplate help that has never been used (Conor Scott)
Pull request description:
[BIP 22 - getblocktemplate](https://github.com/bitcoin/bips/blob/master/bip-0022.mediawiki#Transactions%20Object%20Format) specifies an optional flag, `required` if the transaction must be in the block.
Luke's implementation #936 did not include this flag, and it was later added to the help description in #3246 (more than a year later) but the field was still never actually implemented. As far as I can tell, bitcoin core would have never actually included this in a `getblocktemplate` call, so it seems logical to remove it from the help description.
If I am missing something or this is considered harmless - I can close the PR.
Tree-SHA512: f25dda51cc4e1512aff69309be04e3053bdccc1cf03c8d58e8866aa1fdf9d86cc57df872e85528351fc8a8d6d64a8f46a36c513680834762d854f368fbeb0f44
6755569840 trivial: Replace CPubKey::operator[] with CPubKey::vch where possible (Nikolay Mitev)
Pull request description:
Use variable name instead of calling operator[] through &(*this)[0]
Tree-SHA512: 7054ffda0fa33fb45d4d9f3b29698643f02fd1421d78d5197a0881f2c368dc410647fd2e1a6feb8048e30f8ab8bc2fa8749bf42b9ccbe42c30de8ff80ac45274
5f019d5354 Removes the boost/algorithm/string/join dependency (251)
Pull request description:
This commit removes the `boost/algorithm/string/join` dependency from the project by replacing `boost::algorithm::join` with the helper function proposed by @MarcoFalke in https://github.com/bitcoin/bitcoin/pull/13726#discussion_r204159967
Tree-SHA512: d4ba3e7621b76bd5210aec9b8d6c320f7ee963d7f902e6d2d3fc0eadbee1cd77799e5c09be9c11452d2825f25740fc436cdec3a6b6c66ced674d771e4ed306ae
This commit contains 2 refactors.
1. mark "const" on ArgsManager::GetHelpMessage and IsArgKnown.
2. remove unused "error" argument from ArgsManager::IsArgKnown.
Firstly, I mark "const" on where it is possible to. It is mentioned
before (e.g. https://github.com/bitcoin/bitcoin/pull/13190#pullrequestreview-118823133).
And about 2nd change, ArgsManager::IsArgKnown was added at commit #4f8704d which was
merged at PR #13112. But from its beggining, "error" argument never be used.
I think it should be refactored.
f447a0a707 Remove program options from build system (Chun Kuan Lee)
11588c639e Replace boost program_options (Chun Kuan Lee)
Pull request description:
Concept from #12744, but without parsing negated options.
Tree-SHA512: 7f418744bb8934e313d77a5f162633746ef5d043de802b9c9cd9f7c1842e7e566eb5f171cd9e2cc13317281b2449c6fbd553fa4f09b837e6af2f5d2b2aabdca2
fa4bf92be9 Remove dead service bits code (MarcoFalke)
Pull request description:
Seems fine to remove for the upcoming 0.17 release
Fixes#10993
Tree-SHA512: 3a4664b787e3da399bcaaba693619bd384826df14f469dbdfbbfffc540d9da3f2b322cda262b43388376785f77907c2540541c239ab0fca82bd7eb69d02b6b7a
a3fa4d6a6a QA: Fix bug in -usecli logic that converts booleans to non-lowercase strings (Jonas Schnelli)
4704e5f074 [QA] add createwallet disableprivatekey test (Jonas Schnelli)
c7b8f343e9 [Qt] Disable creating receive addresses when private keys are disabled (Jonas Schnelli)
2f15c2bc20 Add disable privatekeys option to createwallet (Jonas Schnelli)
cebefba085 Add option to disable private keys during internal wallet creation (Jonas Schnelli)
9995a602a6 Add facility to store wallet flags (64 bits) (Jonas Schnelli)
Pull request description:
This mode ('createwallet {"disableprivatekeys": true}') is intended for a sane pure watch-only mode, ideal for a use-case where one likes to use Bitcoin-Core in conjunction with a hardware-wallet or another solutions for cold-storage.
Since we have support for custom change addresses in `fundrawtransaction`, pure watch-only wallets including coin-selection are possible and do make sense for some use cases.
This new mode disables all forms of private key generation and ensure that no mix between hot and cold keys are possible.
Tree-SHA512: 3ebe7e8d54c4d4e5f790c348d4c292d456f573960a5b04d69ca5ef43a9217c7e7671761c6968cdc56f9a8bc235f3badd358576651af9f10855a0eb731f3fc508
Checks that all of the one byte type keys are actually one byte and
throw an error if they are not.
Add tests for each type to check for this behavior.
27ee53c1ae wallet: Add error handling. Check return value of ParseUInt32(...) in ParseHDKeypath(...). (practicalswift)
7223263899 wallet: Add tests for ParseHDKeypath(...) (practicalswift)
Pull request description:
Add error handling. Check return value of `ParseUInt32(...)` in `ParseHDKeypath(...)`.
`ParseUInt32(...)` returns `false` if the entire string could not be parsed or when an overflow or underflow occurred. In such case the uninitialized variable `number` would be used in the calculation of `path` (prior to this commit).
An example key path triggering this is `m/0/4294967296`:
```
ParseHDKeypath("m/0/4294967296", keypath);
```
`4294967296` is `1` + `0xFFFFFFFF` (`uint32_t` max: `4294967295`).
Introduced in a4b06fb42e which was merged into `master` 14 hours ago as part of #13557 ("BIP 174 PSBT Serializations and RPCs").
Tree-SHA512: e5ff423f67c18d82c1231bde6343587a453e793c32004d93dc9b61be6d9372b57a6b2c9978d9eb1000d6cc82fd180f2486013f928dca737fb92daad22c16e467
2c71edc2fc [wallet] [rpc] Fix importaddress help text (John Newbery)
Pull request description:
Help text for `importaddress` referred to the first parameter as `script`, when in fact it's `address`. Calling with a script argument fails:
```
→ bcli -named importaddress script=2N3qhMpHK8WNo7wv87W9eHMgvGyJU1593Ei
error code: -8
error message:
Unknown named parameter script
→ bcli -named importaddress address=2N3qhMpHK8WNo7wv87W9eHMgvGyJU1593Ei
# success!
```
Tree-SHA512: 24dcb2cbd0a43e25896b1c67fa0386df2453ec04d49a339e10992417b3921ce3df8a6aa5abba7d2237d6188b018948b2a21ea2f04d37120ad36c31c7b7fc9f1c
cd3f4aa808 Decouple wallet version from client version (Andrew Chow)
Pull request description:
Instead of comparing version numbers in the wallet to the client version number, compare them to the latest supported wallet version in the client. This allows for wallet version numbers to be unrelated to the client version number.
Tree-SHA512: 69c3e1f45a40bde01d622d504a803fea32fc14e2e27b14b0729725349d8592d56ebca26fd06f117fd6f5164fb4ce980122751b6370f6e25f1a947dbdf4143ddd
020628e3a4 Tests for PSBT (Andrew Chow)
a4b06fb42e Create wallet RPCs for PSBT (Andrew Chow)
c27fe419ef Create utility RPCs for PSBT (Andrew Chow)
8b5ef27937 SignPSBTInput wrapper function (Andrew Chow)
58a8e28918 Refactor transaction creation and transaction funding logic (Andrew Chow)
e9d86a43ad Methods for interacting with PSBT structs (Andrew Chow)
12bcc64f27 Add pubkeys and whether input was witness to SignatureData (Andrew Chow)
41c607f09b Implement PSBT Structures and un/serialization methods per BIP 174 (Andrew Chow)
Pull request description:
This Pull Request fully implements the [updated](https://github.com/bitcoin/bips/pull/694) BIP 174 specification. It is based upon #13425 which implements the majority of the signing logic.
BIP 174 specifies a binary transaction format which contains the information necessary for a signer to produce signatures for the transaction and holds the signatures for an input while the input does not have a complete set of signatures.
This PR contains structs for PSBT, serialization, and deserialzation code. Some changes to `SignatureData` have been made to support detection of UTXO type and storing public keys.
***
Many RPCs have been added to handle PSBTs.
`walletprocesspsbt` takes a PSBT format transaction, updates the PSBT with any inputs related to this wallet, signs, and finalizes the transaction. There is also an option to not sign and just update.
`walletcreatefundedpsbt` creates a PSBT from user provided data in the same form as createrawtransaction. It also funds the transaction and takes an options argument in the same form as `fundrawtransaction`. The resulting PSBT is blank with no input or output data filled in. It is analogous to a combination of `createrawtransaction` and `fundrawtransaction`
`decodepsbt` takes a PSBT and decodes it to JSON. It is analogous to `decoderawtransaction`
`combinepsbt` takes multiple PSBTs for the same tx and combines them. It is analogous to `combinerawtransaction`
`finalizepsbt` takes a PSBT and finalizes the inputs. If all inputs are final, it extracts the network serialized transaction and returns that instead of a PSBT unless instructed otherwise.
`createpsbt` is like `createrawtransaction` but for PSBTs instead of raw transactions.
`convertpsbt` takes a network serialized transaction and converts it into a psbt. The resulting psbt will lose all signature data and an explicit flag must be set to allow transactions with signature data to be converted.
***
This supersedes #12136
Tree-SHA512: 1ac7a79e5bc669933f0a6fcc93ded55263fdde9e8c144a30266b13ef9f62aacf43edd4cbca1ffbe003090b067e9643c9298c79be69d7c1b10231b32acafb6338
417b6c1d29 bitcoinconsensus: invalid flags should be set to bitcoinconsensus_error type, add test cases covering bitcoinconsensus error codes (Thomas Kerin)
Pull request description:
A check was added to the bitcoinconsensus verify_script codepath to ensure that callers only used _exposed_ interpreter flags. I think this error should be written to `bitcoinconsensus_err* err` and not returned by verify_script?
I modified the check so it indicates the error using *err like the others, and added tests covering the error codes.
Tree-SHA512: 8ab370e56956a7d4740f83475e6078774affd663ac92383a02b85295da550f1b4f7a7a68f32ed5c5bcb39d98e2f15ec0b76de8399887e7763eb7c1e21d131093
822a2a33a7 Modified in_addr6 cast in CConman class to work with msvc. (Aaron Clauson)
Pull request description:
Fix to allow net.cpp to compile with MSVC. Without this fix the `(in6_addr)IN6ADDR_ANY_INIT` implicit cast generates a compilation error.
Tree-SHA512: f21c5002401dc93564dcf8d49fbafe7c03ad4182df1616d2ee201e2e172f1d696ca7982fb5b42a3b7d6878c8649823044a858401b4172239fb4b0cc2a38db282
And use it to reduce chainparamsbase's direct reliance on util.h to
only args handling.
utilmemory.h can be replaced with <memory> once we move to C++14.
db6eb90094 [doc] Remove outdated comment about mining code ignoring CPFP (James O'Beirne)
Pull request description:
BlockAssembler chooses transactions on the basis of packages (which incorporate
unconfirmed ancestors into feerate), so the specified RBF comment about mining
code ignoring CPFP is out of date.
Tree-SHA512: a4c1e60fee0a8f450526d565951187f869d000febce0eea8a8d2e18bb140c3c1b8602953d9dcab2d1e8d0c4fc8d392c67eb0773d67e52080d48e6b9bf13f9ee2
be98b2d9a8 [QA] Add scantxoutset test (Jonas Schnelli)
eec7cf7b33 scantxoutset: mention that scanning by address will miss P2PK txouts (Jonas Schnelli)
94d73d32ab scantxoutset: support legacy P2PK script type (Jonas Schnelli)
892de1dfea scantxoutset: add support for scripts (Jonas Schnelli)
78304941f7 Blockchain/RPC: Add scantxoutset method to scan UTXO set (Jonas Schnelli)
9048575511 Add FindScriptPubKey() to search the UTXO set (Jonas Schnelli)
Pull request description:
Alternative to #9152.
This takes `<n>` pubkeys and optionally `<n>` xpubs (together with a definable lookup windows where the default is 0-1000) and looks up common scripts in the UTXO set of all given or derived keys.
The output will be an array similar to `listunspent`. That array is compatible with `createrawtransaction` as well as with `signrawtransaction`.
This makes it possible to prepare sweeps and have them signed in a secure (cold) space.
Tree-SHA512: a2b22a117cf6e27febeb97e5d6fe30184926d50c0c7cbc77bb4121f490fed65560c52f8eac67a9720d7bf8f420efa42459768685c7e7cc03722859f51a5e1e3b
fa43a4138b bench_bitcoin: Avoid read/write to default datadir (MarcoFalke)
ea80b81e2e test_bitcoin: Avoid read/write to default datadir (MarcoFalke)
Pull request description:
tests should never read or write and potentially corrupt the default datadir, so try to avoid it.
Tree-SHA512: ee446ff4bf59da2aed38c2e4758581d6103e9d4c35a118497e9ec21d566ba33d913e160c2d7ba2ea6f937f000343ecea3816154bd87ee47f64f5b0cf9e88f6e0
Added functional tests for PSBT that test the RPCs. Also added all
of the BIP 174 test vectors (except for the updater tests) in the
functional tests.
Added a Unit test for the BIP 174 updater test vector.
walletprocesspsbt takes a PSBT format transaction, updates the
PSBT with any inputs related to this wallet, signs, and finalizes
the transaction. There is also an option to not sign and just
update.
walletcreatefundedpsbt creates a PSBT from user provided data
in the same form as createrawtransaction. It also funds the transaction
and takes an options argument in the same form as fundrawtransaction.
The resulting PSBT is blank with no input or output data filled
in.
decodepsbt takes a PSBT and decodes it to JSON
combinepsbt takes multiple PSBTs for the same tx and combines them.
finalizepsbt takes a PSBT and finalizes the inputs. If all inputs
are final, it extracts the network serialized transaction and returns
that instead of a PSBT unless instructed otherwise.
createpsbt is like createrawtransaction but for PSBTs instead of
raw transactions.
convertpsbt takes a network serialized transaction and converts it
into a psbt. The resulting psbt will lose all signature data and
an explicit flag must be set to allow transactions with signature
data to be converted.
BlockAssembler chooses transactions on the basis of packages (which incorporate
unconfirmed ancestors into feerate), so the specified RBF comment about mining
code ignoring CPFP is out of date.
d45b344ffd Bucket for inbound when scheduling invs to hide tx time (Gleb)
Pull request description:
It has been brought up to my attention that current random delays mechanism (originally intended to obfuscate transaction metadata) allows to easily estimate the time a transaction was received by a node.
It may be done by connecting multiple observer nodes to the same node. Each of those nodes will generate its own schedule of delays. Combined metadata regarding those events from different sources allows an observer to estimate transaction time.
After this patch a spy won't gain additional information by just creating multiple connections to a target.
Tree-SHA512: c71dae5ff350b614cb40a8e201fd0562d3e03e3e72a5099718cd451f0d84c66d5e52bbaf0d5b4b75137514c8efdedcc6ef4df90142b360153f04ad0721545ab1
89e70f9d7f Fix that CWallet::AbandonTransaction would only traverse one level (Ben Woosley)
Pull request description:
Prior to this change, it would mark only the first layer of
child transactions abandoned, due to always following the input `hashTx`
rather than the current `now` tx.
Tree-SHA512: df068b49637d299ad73237c7244005fe5aa966d6beae57aff12e6948f173d9381e1b5d08533f7e3a1416991ed57f9f1f7b834057141d85c07dc60bb1f0872cea
Commit 3fdb29778a renamed share/rpcuser to share/rpcauth but left references to the old path in code; this commit fixes the old references.
Performed update using https://github.com/facebook/codemod with command: `codemod --extensions cpp,py,md 'share/rpcuser' 'share/rpcauth'`
-BEGIN VERIFY SCRIPT-
git grep --files-with-matches 'share/rpcuser' src/*.cpp | xargs sed -i -E 's:share/rpcuser:share/rpcauth:g'
git grep --files-with-matches 'share/rpcuser' test/functional/*.py | xargs sed -i -E 's:share/rpcuser:share/rpcauth:g'
-END VERIFY SCRIPT-
backupwallet was broken for multiwallets in their own directories
(i.e. something like DATADIR/wallets/mywallet/wallet.dat). In this
case, the backup would use DATADIR/wallets/wallet.dat as source file
and not take the specific wallet's directory into account.
This led to either an error during the backup (if the wrong source
file was not present) or would silently back up the wrong wallet;
especially the latter behaviour can be quite bad for users.
f40b3b82df [tests] functional test for createmultisig RPC (Anthony Towns)
b9024fdda3 segwit support for createmultisig RPC (Anthony Towns)
d58055d25f Move AddAndGetDestinationForScript from wallet to outputype module (Anthony Towns)
9a44db2e46 Add outputtype module (Anthony Towns)
Pull request description:
Adds an "address_type" parameter that accepts "legacy", "p2sh-segwit", and "bech32" to choose the type of address created. Defaults to "legacy" rather than the value of the `-address-type` option for backwards compatibility.
As part of implementing this, OutputType is moved from wallet into its own module, and `AddAndGetDestinationForScript` is changed to apply to a `CKeyStore` rather than a wallet, and to invoke `keystore.AddCScript(script)` itself rather than expecting the caller to have done that.
Fixes#12502
Tree-SHA512: a08c1cfa89976e4fd7d29caa90919ebd34a446354d17abb862e99f2ee60ed9bc19d8a21a18547c51dc3812cb9fbed86af0bef2f1e971f62bf95cade4a7d86237
ac51a26bdc During IBD, when doing pruning, prune 10% extra to avoid pruning again soon after (Luke Dashjr)
Pull request description:
Pruning forces a chainstate flush, which can defeat the dbcache and harm performance significantly.
Alternative to #11359
Tree-SHA512: 631e4e8f94f5699e98a2eff07204aa2b3b2325b2d92e8236b8c8d6a6730737a346e0ad86024e705f5a665b25e873ab0970ce7396740328a437c060f99e9ba4d9
3339ba28e9 Make g_enable_bip61 a member variable of PeerLogicValidation (Jesse Cohen)
6690a28606 Restrict as much as possible in net_processing to translation unit (Jesse Cohen)
1d4df02b7e [move-only] Move things only referenced in net_processing out of header file (Jesse Cohen)
02bbc05310 Rescope g_enable_bip61 to net_processing (Jesse Cohen)
Pull request description:
As part of a larger effort to decouple net_processing and validation a bit, these are a bunch of simple scope cleanups. I've moved things out of the header file that are only referenced in net_processing and added static (or anonymous namespace) modifiers to everything possible in net_processing.
There are a handful of functions which could be static except that they are exposed for the sake of unit testing - these are explicitly commented. There has been some discussion of a compile time annotation, but no conclusion has been reached on that yet.
This is somewhat related to other prs #12934#13413#13407 and will be followed by prs that reduce reliance on cs_main to synchronize data structures which are translation unit local to net_processing
Tree-SHA512: 46c9660ee4e06653feb42ba92189565b0aea17aac2375c20747c0d091054c63829cbf66d2daddf65682b58ce1d6922e23aefea051a7f2c8abbb6db253a609082
702ae1e21a [RPC] [wallet] allow getbalance to use min_conf and watch_only without accounts. (John Newbery)
cf15761f6d [wallet] GetBalance can take a min_depth argument. (John Newbery)
0f3d6e9ab7 [wallet] factor out GetAvailableWatchOnlyBalance() (John Newbery)
7110c830f8 [wallet] deduplicate GetAvailableCredit logic (John Newbery)
ef7bc8893c [wallet] Factor out GetWatchOnlyBalance() (John Newbery)
4279da4785 [wallet] GetBalance can take an isminefilter filter. (John Newbery)
Pull request description:
#12953 inadvertently removed the functionality to call `getbalance "*" <int> <bool>` to get the wallet's balance with either minconfs or include_watchonly.
This restores that functionality (when `-deprecatedrpc=accounts`), and also makes it possible to call ``getbalance minconf=<int> include_watchonly=<bool>` when accounts are not being used.
Tree-SHA512: 67e84de9291ed6d34b23c626f4dc5988ba0ae6c99708d02b87dd3aaad3f4b6baa6202a66cc2dadd30dd993a39de8036ee920fcaa8cbb1c5dfe606e6fac183344
The SignPSBTInput function takes a PSBTInput, SignatureData, SigningProvider,
and other data necessary for signing. It fills the SignatureData with data from
the PSBTInput, retrieves the UTXO from the PSBTInput, signs and finalizes the
input if possible, and then extracts the results from the SignatureData and
puts them back into the PSBTInput.
Added methods which move data to/from SignaturData objects to
PSBTInput and PSBTOutput objects.
Added sanity checks for PSBTs as a whole which are done immediately
after deserialization.
Added Merge methods to merge a PSBT into another one.
3c292cc19 ScanforWalletTransactions should mark input txns as dirty (Gregory Sanders)
Pull request description:
I'm hitting a corner case in my mainnet wallet where I load a restore a wallet, call `rescanblockchain` from RPC, and it's "double counting" an output I've sent to myself since currently it never marks input transactions as dirty. This is fixed by a restart of the wallet.
Note that this only happens with keys with birthdate *after* the blocks containing the spent funds which gets scanned on startup, so it's hard to test without a set seed function.
Tree-SHA512: ee1fa152bb054b57ab4c734e355df10d241181e0372c81d583be61678fffbabe5ae60b09b05dc1bbbcfb4838df9d8538791d4c1d80a09b84d78ad2f50dcb0a61
According to my understanding, it should not be possible for coinbase
transactions to be conflicting, thus it should not be possible for
GetDepthInMainChain to return a negative result. If it did, this would
also result in innacurate results for GetBlocksToMaturity due to the
math therein. asserting ensures accuracy.
Prior to this change, it would mark only the first layer of
child transactions abandoned, due to always following the input hashTx
rather than the current now tx.
253f592909 Add stdin, stdout, stderr to ignored export list (Chun Kuan Lee)
fc6a9f2ab1 Use IN6ADDR_ANY_INIT instead of in6addr_any (Cory Fields)
908c1d7745 GCC-7 and glibc-2.27 compat code (Chun Kuan Lee)
Pull request description:
The `__divmoddi4` code was modified from https://github.com/gcc-mirror/gcc/blob/master/libgcc/libgcc2.c . I manually find the older glibc version of log2f by objdump, use `.symver` to specify the certain version.
Tree-SHA512: e8d875652003618c73e019ccc420e7a25d46f4eaff1c7a1a6bfc1770b3b46f074b368b2cb14df541b5ab124cca41dede4e28fe863a670589b834ef6b8713f9c4
d0b9405f96 Refactors `keystore.h` type aliases. (251)
Pull request description:
This pull request frees `keystore.h` from type alias declarations that have been declared at file scope level.
`keystore.h` has various type aliases that have been declared ~3 - 6 years ago at file scope level, which can either be encapsulated or removed.
Where type alias declarations are encapsulated at the appropriate scope and access level, C++11's `using` notation is used in favor of the `typedef` notation.
Tree-SHA512: 1395cdc63e0c7ff5a1b1721675ad4416f71f507e999bd4ba019f03457cbfc08877848f10a8db7f5ccd2cd5ca3f5a291c986616f7703172fb6d79fba7447ffba8
075429a482 Use common SetDataDir method to create temp directory in tests. (winder)
Pull request description:
Took a stab at #12574
Created a `getPath` method which can be used with the `TestingSetup` fixture to create a temp directory. Updated tests using temp directories to use this method.
I tried setting up a `BOOST_GLOBAL_FIXTURE` to create a truly global path for all tests but was getting linker errors when including `boost/test/unit_test.hpp` in `test_bitcoin.cpp`. Even if I had gotten the linking to work, it looks like `make check` invokes the test binary a bunch of times, so it may not have worked anyway.
Tree-SHA512: b51d0f5fada5d652ccc9362596cf98a742aa47f5daf94f189b5f034d8c035c85d095377befdcff7fb4247154d5160e8c500d70f554a2158e2c185a9d24f694f1
This squashed commit either encapsulates type alias declarations at the appropriate scope; or removes type aliases that are not used.
The encapsulated type aliases are declared using C++11's `using` notation in favor of the `typedef` notation.
beef7ec4be Remove useless mapRequest tracking that just effects Qt display. (Matt Corallo)
Pull request description:
I thought we had removed this a long time ago, TBH, its really
confusing feedback to users that we display whether a tx was
broadcast to immediate neighbor nodes, given that has little
indication of whether the tx propagated very far.
Tree-SHA512: c9d0808fb60146919bb78d0860ec2193601966c944887eaae7837408422f7e85dfdb306407a613200cdd4726aec66da18df618ebc6a8cfe8650bf08d4a8dc155
189cf35f3e Add simple bech32 benchmarks (Karl-Johan Alm)
Pull request description:
This PR adds benchmarks to `Encode()`/`Decode()`.
The benchmark commit is duplicated in #13632.
Tree-SHA512: 102a193e4af58c9cb23c66d3dc7e174aa6328edab0ed74f92deb7804db5c3d0601807b3e25a5472b5c72d6113cde0dbc9976315644671a8f14ecf349967dbaaa
685d1d8115 [tests] Check signrawtransaction* errors on missing prevtx info (Anthony Towns)
a3b065b51f Error on missing amount in signrawtransaction* (Anthony Towns)
Pull request description:
Signatures using segregated witness commit to the amount being spent, so that value must be passed into signrawtransactionwithkey and signrawtransactionwithwallet. This ensures an error is issued if that doesn't happen, rather than just assuming the value is 0 and producing a signature that is almost certainly invalid.
Based on Ben Woosley's #12458, Fixes: #12429.
Tree-SHA512: 8e2ff89d5bcf79548e569210af0d850028bc98d86c149b92207c9300ab1d63664a7e2b222c1be403a15941aa5cf36ccc3c0d570ee1c1466f3496b4fe06c17e11
f95989b3ed Fix AreInputsStandard test to reference the proper scriptPubKey (Ben Woosley)
Pull request description:
This value doesn't affect the outcome of the test, because the values are
properly set on line 351 (https://github.com/bitcoin/bitcoin/pull/13565/files#diff-b7061098b41bd31ef5db043705441133R351), but this makes the test values internally coherent.
Tree-SHA512: 5a5fda843475abd91f6c366315536d3573e70420d7c6abeebd74a54939d4de774c33faad4560d1fd4b2c35006224d9e7b3a8c925fe9926013586fd1f7aa886cc
dae0d13bbb RPCAuth Detection in Logs (Linrono)
Pull request description:
This adds a log entry for when RPCAuth is detected.
This keeps everything working as it currently is. I suppose it could be added as a nested if to also stop the creation of the cookie file if this would be wanted.
Tree-SHA512: 61a893b2e06ae5e7db2ddedc63819d34047fad0df764184b1b2b3f49016581e6bbf2c94a59374ca2c300190cd4e827f01da286aad5a4cc8fe5140e258b1cf8c4
I thought we had removed this a long time ago, TBH, its really
confusing feedback to users that we display whether a tx was
broadcast to immediate neighbor nodes, given that has little
indication of whether the tx propagated very far.
fa324a8b15 doc: Rewrite some validation doc as lock annotations (MarcoFalke)
Pull request description:
#13402 added some lock annotations in comments. This pull removes them and adds clang-readable locking annotations instead.
Tree-SHA512: 2d392efa8ac4978830a9df08b2009e69d6f1ac031f62be2275ae8d7c7e483331c7f8d458d865443af907a7af27a592421c6cca6b2df3f2877e0f369b9198f383
66b2cf1ccf Use immintrin.h everywhere for intrinsics (Pieter Wuille)
4c935e2eee Add SHA256 implementation using using Intel SHA intrinsics (Pieter Wuille)
268400d318 [Refactor] CPU feature detection logic for SHA256 (Pieter Wuille)
Pull request description:
Based on #13191.
This adds SHA256 implementations that use Intel's SHA Extension instructions (using intrinsics). This needs GCC 4.9 or Clang 3.4.
In addition to #13191, two extra implementations are provided:
* (a) A variable-length SHA256 implementation using SHA extensions.
* (b) A 2-way 64-byte input double-SHA256 implementation using SHA extensions.
Benchmarks for 9001-element Merkle tree root computation on an AMD Ryzen 1800X system:
* Using generic C++ code (pre-#10821): 6.1ms
* Using SSE4 (master, #10821): 4.6ms
* Using 4-way SSE4 specialized for 64-byte inputs (#13191): 2.8ms
* Using 8-way AVX2 specialized for 64-byte inputs (#13191): 2.1ms
* Using 2-way SHA-NI specialized for 64-byte inputs (this PR): 0.56ms
Benchmarks for 32-byte SHA256 on the same system:
* Using SSE4 (master, #10821): 190ns
* Using SHA-NI (this PR): 53ns
Benchmarks for 1000000-byte SHA256 on the same system:
* Using SSE4 (master, #10821): 2.5ms
* Using SHA-NI (this PR): 0.51ms
Tree-SHA512: 2b319e33b22579f815d91f9daf7994a5e1e799c4f73c13e15070dd54ba71f3f6438ccf77ae9cbd1ce76f972d9cbeb5f0edfea3d86f101bbc1055db70e42743b7
d280617bf5 [qa] Add a test for merkle proof malleation (Suhas Daftuar)
ed82f17000 have verifytxoutproof check the number of txns in proof structure (Gregory Sanders)
Pull request description:
Recent publication of a weakness in Bitcoin's merkle tree construction demonstrates many SPV applications vulnerable to an expensive to pull off yet still plausible attack: https://bitslog.wordpress.com/2018/06/09/leaf-node-weakness-in-bitcoin-merkle-tree-design/
This change would at least allow `verifytxoutproof` to properly validate that the proof matches a known block, with known number of transactions any time after the full block is processed. This should neuter the attack entirely.
The negative is that a header-only processed block/future syncing mode would cause this to fail until the node has imported the data required.
related: #13451
`importprunedfunds` needs this check as well. Can expand it to cover this if people like the idea.
Tree-SHA512: 0682ec2b622a38b29f3f635323e0a8b6fc071e8a6fd134c954579926ee7b516e642966bafa667016744ce49c16e19b24dbc8801f982a36ad0a6a4aff6d93f82b
57889e688d bitcoin-tx: Stricter check for valid integers (Daniel Kraft)
Pull request description:
Just calling `atoi` to convert strings to integers does not check for valid integers very thoroughly; in particular, it just ignores everything starting from the first non-numeral character. Even a string like "foo" is fine and silently returns 0.
This meant that `bitcoin-tx` would not fail if such a string was passed in various places where an integer is expected (like the `locktime` or an input/output index); this means that it would, for instance, silently accept a typo and interpret it in an unexpected way.
In this change, we use `ParseInt64` for parsing strings to integers, which actually verifies that the full string is valid as number. New tests in the `bitcoin-util-test` cover the new error paths.
This fixes#13599.
Tree-SHA512: 146a0af275e9f57784e5d0582d3defbac35551b54b6b7232f8a0b20db04aa611125e52aa4512ef2f8ed2cafc2a12fe586f9d10ed66d641cff090288f279b1988
161e8d40a4 RPC: Add new getzmqnotifications method. (Daniel Kraft)
caac39b0ac Make ZMQ notification interface instance global. (Daniel Kraft)
Pull request description:
This adds a new RPC method `getzmqnotifications`, which returns information about all active ZMQ notification endpoints. This is useful for software that layers on top of bitcoind, so it can verify that ZeroMQ is enabled and also figure out where it should listen.
See #13526.
Tree-SHA512: edce722925741c84ddbf7b3a879fc9db1907e5269d0d97138fe724035d93ee541c2118c24fa92f4197403f380d0e25c2fda5ca6c62d526792ea749cf527a99a0
5e362c0cf0 Fix command line help for -printtoconsole and -debuglogfile (Samuel B. Atwood)
Pull request description:
This is a rebased version of #13589 with the changes to the 0.16.x release notes removed.
> #13004 changed the default behavior for printtoconsole but this has not been reflected in the command line help.
> This fixes the description of -printtoconsole to reflect this change, and also provides the user with missing information on how to explicitly disable logging to debug.log.
> At present I have made the latter update to two separate places (-printtoconsole and -debuglogfile) because a user looking for information on how to disable logging is probably going to look in the "Debugging/Testing Options" section. Moving -debuglogfile from the "General" options category to the "Debugging/Testing" section could potentially remove the need for this redundancy but may be out of the scope of this PR.
Tree-SHA512: 7461d59a1864039d5a9dfcce765a1169df882f51a4ca50a6066416c0803821cd821be07be534e0bd57f0a22c0b45adb881a93abbe91962bc37d2d228f35ee712
4b6ab02122 Remove unused argument to ProcessGetBlockData(...) (practicalswift)
c469ecf22e net: Remove unused interrupt from SendMessages (fanquake)
Pull request description:
Discussed very briefly with cfields.
Includes 65b4400 from #13554 as it's a similar refactor.
Tree-SHA512: 45cd64208a5c8164242db74e6687e9344ea592bab5e7f9ba8e1bb449057fc908ec9d8b8523748a68426e4a4304e3388a138cd834698b39837b2149b72beefdc9
Makes AddAndGetDestinationForScript use a generic CKeyStore rather than
the wallet, and makes it always add the script to the keystore, rather
than only adding related (redeem) scripts.
63c16ed507 Use __cpuid_count for gnu C to avoid gitian build fail. (Chun Kuan Lee)
Pull request description:
Fixes#13538
Tree-SHA512: 161ae4db022288ae8631a166eaea2d08cf2c90bcd27218a094a754276de30b92ca9cfb5a79aa899c5a9d0534c5d7261037e7e915e1b92bc7067ab1539dc2b51e
#13004 changed the default behavior for printtoconsole but this has not been reflected in the command line help.
This fixes the description of -printtoconsole to reflect this change, and also provides the user with missing information on how to explicitly disable logging to debug.log.
At present I have made the latter update to two separate places (-printtoconsole and -debuglogfile) because a user looking for information on how to disable logging is probably going to look in the "Debugging/Testing Options" section. Moving -debuglogfile from the "General" options category to the "Debugging/Testing" section could potentially remove the need for this redundancy but may be out of the scope of this PR.
ea65182f03 [wallet] loadwallet shouldn't create new wallets. (John Newbery)
Pull request description:
A bug in the initial implementation of loadwallet meant that if the
arguement was a directory that didn't contain a wallet.dat file, a new
wallet would be created in that directory. Fix that so that if a
directory is passed in, it must contain a wallet.dat file.
Bug reported by promag (João Barbosa).
Tree-SHA512: 0a59fa8a33fde51a88544ad288b00e4995284fe16424f643076aaba42b8244fff362145217650ee53d518dfab7efbed4237632c34cdd3dcbbecaa9ecaab5fd7b
Just calling atoi to convert strings to integers does not check for
valid integers very thoroughly; in particular, it just ignores
everything starting from the first non-numeral character. Even a string
like "foo" is fine and silently returns 0.
This meant that bitcoin-tx would not fail if such a string was passed in
various places where an integer is expected (like the locktime or an
input/output index); this means that it would, for instance, silently
accept a typo and interpret it in an unexpected way.
In this change, we use ParseInt64 for parsing strings to integers,
which actually verifies that the full string is valid as number.
New tests in the bitcoin-util-test cover the new error paths.
1fc605a8ae fix bench/prevector.cpp (Akio Nakamura)
Pull request description:
This patch intends to fix some incorrect action of bench/prevector.cpp.
1. PrevectorClear()
2nd call of ```clear()``` should to operate t1 instead of t0.
This patch changes t0 to t1.
2. PREVECTOR_TEST()
PREVECTOR_TEST macro should to call both
```PrevectorXX<nontrivial_t>(state)``` and ```PrevectorXX<trivial_t>(state)```
by specific ```"name"``` which given by parameter instead of calling
```PrevectorResize<>()``` regardless of ```"name"```.
This patch changes ```"PrevectorResize<"``` of this macro to
```"Prevector ## name<"```.
Tree-SHA512: d0498c6d627d7e96fc8ccfb329ca0be2641535b1ce1923d9b1fc720825f9bf4d7281dc8d5ae929038e37b3e625189af9807cb62e6d20933d73832a6dff4b5596
98b181323 [build] Tune wildcards for LIBSECP256K1 target (Karl-Johan Alm)
Pull request description:
Automake would think the target was out of date every time because e.g. '.deps' was updated.
Note: I am assuming that secp256k1 depends on `*.h`, `*.c`, ~~and `libsecp256k1-config.h`~~ (it's `.h` so already included), aside from pre-existing `include/*`. If there are other files that would require a rebuild of the `LIBSECP256K1` target, they should probably be added.
It would be neat if you could exclude specific files, rather than split it up like this, but it doesn't seem possible (https://www.gnu.org/software/make/manual/html_node/Wildcard-Function.html#Wildcard-Function)
Should probably note this:
```Bash
$ V=1 make check VERBOSE=1
Making check in src
make[1]: Entering directory '/home/user/workspace/bitcoin/src'
make[2]: Entering directory '/home/user/workspace/bitcoin/src'
make -C secp256k1 libsecp256k1.la
make[3]: Entering directory '/home/user/workspace/bitcoin/src/secp256k1'
make[3]: 'libsecp256k1.la' is up to date.
make[3]: Leaving directory '/home/user/workspace/bitcoin/src/secp256k1'
make check-TESTS check-local
make[3]: Entering directory '/home/user/workspace/bitcoin/src'
make[4]: Entering directory '/home/user/workspace/bitcoin/src'
make -C secp256k1 libsecp256k1.la
make[5]: Entering directory '/home/user/workspace/bitcoin/src/secp256k1'
make[5]: 'libsecp256k1.la' is up to date.
make[5]: Leaving directory '/home/user/workspace/bitcoin/src/secp256k1'
PASS: test/test_bitcoin.exe
```
Tree-SHA512: 62b133c76e882788dae0c14208a9f5acdbd731c2e7a248f9e01f488b8ec13f9d637d7ad0d63e18d324bb4e088f1836a936649b0fb97bee679eaadedbeed5c981
2f1a30c63 Fix MAX_STANDARD_TX_WEIGHT check (Johnson Lau)
Pull request description:
As suggested by the constant name and its comment in policy.h, a transaction with a weight of exactly MAX_STANDARD_TX_WEIGHT should be allowed. Users could be confused.
Tree-SHA512: af417de1c6a2e6796ebbb39aa0caad8764302ded155cb1bbfbe457e4567c199cc53256189832b17d4aeec369e190b3edd4c6116d5f0b8cf0ede6dfb4ed83bdd3
2dcd7b4ec logging: avoid nStart may be used uninitialized in AppInitMain warning (mruddy)
Pull request description:
Was getting the following compiler warning:
```
init.cpp: In function ‘bool AppInitMain()’:
init.cpp:1616:60: warning: ‘nStart’ may be used uninitialized in this function [-Wmaybe-uninitialized]
LogPrintf(" block index %15dms\n", GetTimeMillis() - nStart);
```
It's ok without this PR, but this PR renames `nStart` to `load_block_index_start_time`, makes it `const`, and also reduces the scope of the variable.
The logging line is moved such that the the time spent will be logged even if a shutdown is requested while the index is being loaded.
Having the log message output even when a shutdown is requested may be how this was intended to work before anyways. That could explain the leading space, as such a log message now looks like:
```
2018-06-30T11:34:05Z [0%]...[16%]...[33%]...[50%]... block index 25750ms
2018-06-30T11:34:17Z Shutdown requested. Exiting.
```
Tree-SHA512: 967048afbc31f2ce8f80ae7d33fee0bdcbe94550cf2b5b662087e2a7cff14a8bf43d909b30f930660c184ec6c3c7e1302a84e3e54fc1723f7412827f4bf2c518
b81560029 Remove CombineSignatures and replace tests (Andrew Chow)
ed94c8b55 Replace CombineSignatures with ProduceSignature (Andrew Chow)
0422beb9b Make SignatureData able to store signatures and scripts (Andrew Chow)
b6edb4f5e Inline Sign1 and SignN (Andrew Chow)
Pull request description:
Currently CombineSignatures is used to create the final scriptSig or an input. However ProduceSignature is capable of doing this itself. Using both CombineSignatures and ProduceSignature results in code duplication which is unnecessary.
To move the scriptSig construction to ProduceSignatures, the SignatureData class contains two maps to hold pubkeys mapped to signatures, and script ids mapped to scripts. DataFromTransaction is extended to be able to extract signatures, their public keys, and scripts from existing ScriptSigs.
The SignaureData are then passed down to SignStep which can use the aforementioned maps to get the signatures, pubkeys, and scripts that it needs, falling back to the actual SigningProvider and SignatureCreator if the data are not available in the SignatureData.
Additionally, Sign1 and SignN have been removed and their functionality inlined into SignStep since Sign1 is really just a wrapper around CreateSig.
Since ProduceSignature can produce the final scriptSig or scriptWitness by using SignatureData which has extracted data from the transaction, CombineSignatures is unnecessary as ProduceSignature is able to replicate all of CombineSignatures' functionality.
This also furthers BIP 174 support and begins moving towards a BIP 174 style backend.
The tests have also been updated to use the new combining methodology.
Tree-SHA512: 78cd58a4ebe37f79229bd5eee2958a0bb45cd7f36d0e993eee13ff685b3665dd76ef2dfd5f47d34678995bb587f5594100ee5f6c09b1c69ee96d3684d470d01e
49d1f4cdd Detect if char equals int8_t (Chun Kuan Lee)
Pull request description:
Probably fixes#13576. I'm not able to test this. @stacepellegrino, can you test this?
Tree-SHA512: b750e00e11e6b6f6341fec668ec2254cc101c8ebdd4878f320d6cb3b07cf326761146e4ceff0b6405b7e503ff64c093a8274bd524a097e2c49382dc296972c4f
1. PrevectorClear()
2nd call of clear() should to operate t1 instead of t0.
This patch changes t0 to t1.
2. PREVECTOR_TEST()
PREVECTOR_TEST macro should to call both
PrevectorXX<nontrivial_t>(state) and PrevectorXX<trivial_t>(state)
by specific "name" which given by parameter instead of calling
PrevectorResize<>() regardless of "name".
This patch changes "PrevectorResize<" of this macro to
"Prevector ## name<".
This adds a new RPC method "getzmqnotifications", which returns
information about all active ZMQ notification endpoints. This is useful
for software that layers on top of bitcoind, so it can verify that
ZeroMQ is enabled and also figure out where it should listen.
See https://github.com/bitcoin/bitcoin/issues/13526.
b330c3001 Docs: Improve doc of options addnode, connect, seednode (wodry)
Pull request description:
Just clarify that options `addnode`, `connect` and `seednode` can be specified multiple times.
Tree-SHA512: ed149cabe7fc1d40f2fb6ad8b643656e0ec49cfae1834c157c89170eac1241efa3c5683d97266ff921f5229f28d732c9f7ee030e7902d9a79db1e0c8716fa3db
1fabd59e7 Break circular dependency: init -> * -> init by extracting shutdown.h (Ben Woosley)
e62fdfeea Drop unused init.h includes (Ben Woosley)
Pull request description:
Most includers just wanted to react to pending shutdown.
This isolates access to `fRequestShutdown` and limits access to the shutdown api functions, including the new `CancelShutdown` for setting it to `false`.
Tree-SHA512: df42f75dfbba163576710e9a67cf1228531fd99d70a2f187bfba0bcc476d6749cf88180a97e66a81bb5b6c3c7f0917de7402d26039ba7b644cb7509b02f7e267
07c493f2d scripted-diff: Replace NET_TOR with NET_ONION (wodry)
Pull request description:
This is a follow-up to #13532, where @promag already asked if this renaming would make sense.
If network shall be named _Onion_ instead of _Tor_ (like in the option `onlynet`), renaming the network enum NET_TOR to NET_ONION maybe would make sense and be stringent.
Change was produced with the following script:
```
#!/bin/bash
for file in $(grep --exclude-dir='.git' --files-with-matches --binary-files=without-match --recursive NET_TOR bitcoin/)
do
sed --in-place --expression='s/NET_TOR/NET_ONION/g' $file
done
```
_Tor_ is used at many other places in the code, though.
Tree-SHA512: 4ffdeca8115031465eb64e1c76694fb77b5900c4ea465d3c13d9b6b75a1eb04c45913f83cdc8bdbef28936aeec4655f1d4905b3b98407da3263632a2128a8d23
bb582a59c Add P2WSH destination helper and use it instead of manual hashing (Pieter Wuille)
eaba1c111 Add additional unit tests for invalid IsMine combinations (Pieter Wuille)
e6b9730c4 Do not expose invalidity from IsMine (Pieter Wuille)
Pull request description:
This improves the handling of INVALID in IsMine:
* Extra INVALID conditions were added to `IsMine` (following https://github.com/bitcoin/bitcoin/pull/13142/files#r185349057), but these were untested. Add unit tests for them.
* In https://github.com/bitcoin/bitcoin/pull/13142#issuecomment-386396975 it was suggested to merge `isInvalid` into the return status. This PR takes a different approach, and removes the `isInvalid` entirely. It was only ever used inside tests, as normal users of IsMine don't care about the reason for non-mine-ness, only whether it is or not. As the unit tests are extensive enough, it seems sufficient to have a black box text (with tests for both compressed and uncompressed keys).
Some addition code simplification is done as well.
Tree-SHA512: 3267f8846f3fa4e994f57504b155b0e1bbdf13808c4c04dab7c6886c2c0b88716169cee9c5b350513297e0ca2a00812e3401acf30ac9cde5d892f9fb59ad7fef
Instead of using CombineSignatures to create the final scriptSig or
scriptWitness of an input, use ProduceSignature itself.
To allow for ProduceSignature to place signatures, pubkeys, and scripts
that it does not know about, we pass down the SignatureData to SignStep
which pulls out the information that it needs from the SignatureData.
In addition to having the scriptSig and scriptWitness, have SignatureData
also be able to store just the signatures (pubkeys mapped to sigs) and
scripts (script ids mapped to scripts).
Also have DataFromTransaction be able to extract signatures and scripts
from the scriptSig and scriptWitness of an input to put them in SignatureData.
Adds a new SignatureChecker which takes a SignatureData and puts pubkeys
and signatures into it when it successfully verifies a signature.
Adds a new field in SignatureData which stores whether the SignatureData
was complete. This allows us to also update the scriptSig and
scriptWitness to the final one when updating a SignatureData with another
one.
-BEGIN VERIFY SCRIPT-
sed --in-place'' --expression='s/NET_TOR/NET_ONION/g' $(git grep -I --files-with-matches 'NET_TOR')
-END VERIFY SCRIPT-
The --in-place'' hack is required for sed on macOS to edit files in-place without passing a backup extension.
f618ebc4e4 validation: count blocks correctly for check level < 3 (Karl-Johan Alm)
Pull request description:
As noted in https://github.com/bitcoin/bitcoin/pull/13428#issuecomment-396129295 there is a bug where if check level < 3, the resulting count for blocks is wrong, because `pindexState` is never updated.
Post-commit `./bitcoin-cli verifychain 1 3`:
```
2018-06-11T07:12:28Z Verifying last 3 blocks at level 1
2018-06-11T07:12:28Z [0%]...[33%]...[66%]...[99%]...[DONE].
2018-06-11T07:12:28Z No coin database inconsistencies in last 3 blocks (0 transactions)
```
Pre-commit `./bitcoin-cli verifychain 1 3`:
```
2018-06-11T07:13:34Z Verifying last 3 blocks at level 1
2018-06-11T07:13:34Z [0%]...[33%]...[66%]...[99%]...[DONE].
2018-06-11T07:13:34Z No coin database inconsistencies in last 0 blocks (0 transactions)
```
Tree-SHA512: 3d82ed26665162c9615fb0e6e91a46ed4d229a5e6797c6c420e6b0bf1be6e5e02401c6e9a93b7a5aec503a2650d8c20d1b45fe300a922379e4cef8ee26e18d96
4132ad3bf Show symbol for inbound/outbound in peer table (wodry)
Pull request description:
Fixes#13483
The address in the network peer table is prefixed with an up-arrow symbolizing an outbound connection, or an down-array symbolizing an inbound connection. See screenshot.
The user has an easy visual confirmation about the connection direction state. I really like it :)
Impact to columns sorting is grouping by inbound/outbound first, which in my opinion is an advantage, too.
Tree-SHA512: d355f679d34c3006743c06750be5f36a083c1a8376da8f5f35045fcd9df964153409946fdde5007734f23bd692c91355962dc42df31122cdcf88e4affce8bc0e
This moves the used instance of CZMQNotificationInterface from a static
variable in init.cpp to a globally-accessible one declared in
zmq/zmqnotificationinterface.h. The variable is also renamed to
g_zmq_notification_interface, to be consistent with other globals.
We need this to implement a new RPC method "getzmqnotifications" (see
https://github.com/bitcoin/bitcoin/issues/13526) in a follow up.
c2e4fc84ec bench: Simplify CoinSelection (João Barbosa)
Pull request description:
Closes#13549.
As pointed by @MarcoFalke:
- `SelectCoinsMinConf` should always succeed as there are enough coins in the wallet.
- Removed creating the coins in the wallet.
Tree-SHA512: 965c363bcaf0ca7a1dec35b5cf4866abcf190c53eb7012dc4aeb4d29830f13a7465644bfb5a47f6ea3eaa86e4d4a57fe41e7b2593bf5094b76a551c4c71625bb
This value doesn't affect the outcome of the test, because the values are
properly set on line 351, but this makes the test values internally coherent.
A bug in the initial implementation of loadwallet meant that if the
arguement was a directory that didn't contain a wallet.dat file, a new
wallet would be created in that directory. Fix that so that if a
directory is passed in, it must contain a wallet.dat file.
Bug reported by promag (João Barbosa).
Signatures using segregated witness commit to the amount being spent,
so that value must be passed into signrawtransactionwithkey and
signrawtransactionwithwallet. This ensures an error is issued if that
doesn't happen, rather than just assuming the value is 0 and producing
a signature that is almost certainly invalid.
9fdf05d70c tests: Fix lock-order-inversion (potential deadlock) in DoS_tests. Reported by TSAN. (practicalswift)
Pull request description:
Fix lock-order-inversion (potential deadlock) in `DoS_tests`. Reported by Clang's TSAN.
Makes `src/test/test_bitcoin` pass also when compiled with TreadSanitizer (`./configure --with-sanitizers=thread` with `clang`).
Tree-SHA512: 41403bb7b6e26bdf1b830b5699e27c637d522bae1799d2a19ed4b68b21b2555438b42170d8b1189613beb32a69b76a65175d29a83f5f4e493896c3d0d94ae26d
9f8c54b1b5 Log warning message when deprecated network name 'tor' is used (e.g. option onlynet=tor) (wodry)
Pull request description:
As @laanwj mentioned [here](https://github.com/bitcoin/bitcoin/pull/13418#discussion_r197645385), using option `onlynet=tor` is deprecated.
I think it would be good to give the user a depcreaction warning feedback, so users can switch to `onlynet=onion` so there is a perspective for removing the deprecated `tor` in the future to decrease confusion.
Currently, users maybe just wonder that they can use a undocumented option, or they are not aware that they use a deprecated option.
Alternatively for the log warning message, I think at least this deprecetaion should be documented in the source code in a comment for readers of the source code.
Tree-SHA512: f4889793cdd62a0a13353e13994ed50ca7d367fa9da9897ce909f86cf0b0ce6151b3c484c8e514b8ac332949c6bbc71001e06e918248a1089f73756bd4840602
df10f07db1 [wallet] Don't use accounts when checking balance in sendmany (John Newbery)
e209184101 [wallet] deprecate sendfrom RPC method. (John Newbery)
Pull request description:
A couple of fixups from the accounts API deprecation PR (#12953):
- properly deprecate `sendfrom`
- don't use accounts when calculating balance in `sendmany` (unless the `-deprecatedrpc=accounts` flag is being used)
Tree-SHA512: 1befde055067438c4c3391bbff1aaed0e6249efd708c567db3f1faad40a0f28e64f95e5bad0679ae826d24a0239e4bc8a1c392dc93e2e7502343a7f6b1d1845c
faca0a8625 doc: Clarify that mempool txiter is const_iterator (MarcoFalke)
Pull request description:
`iterator` and `const_iterator` are the same type for multi indexed transaction sets, but `const_iterator` should be preferred for documentation purposes.
Tree-SHA512: 83e8af36d15aa1e9fc59b3c2279504fd6f6ea3188dc43e36dec279ee0613ff07947d7143fd112bade7868b0dba59ecab3fd246cbde82e376ef965b646d9f8c4d
3f72d04e29 Fix parameter count check for importpubkey. (Kristaps Kaupe)
Pull request description:
Found this while working on #13464. Parameter count check for `importpubkey` was wrong.
Tree-SHA512: aba41b666c6493379f320be5e3e438a6cad1a96429102ff4428c092c48f29c2eead2195792c0b018296f20e1c42eb091dd5b9886c42cecbb1f0d03d5def14705
faa2cf685a [qt] coincontrol: Remove unused qt4 workaround (MarcoFalke)
Pull request description:
This reverts 55eade9d46 since it is no longer required.
Tree-SHA512: ec523d505b410ab72ce9fdee86dfcfe96011472fb386744bb585169724270426ee65da2b527ae47928d604e1f21f54aa2b4b82f9a9d3fbfea1a6516478d81d11
bb3de15ad8 qt: Move BitcoinGUI initializers to class, fix initializer order warning (Wladimir J. van der Laan)
Pull request description:
- C++11-ize the code (move initializers to class, change `0` to `nullptr` where appropriate)
- Make sure `m_wallet_selector` is initialized
- And fix the following warning:
bitcoin/src/qt/bitcoingui.cpp:122:5: warning: field 'spinnerFrame' will be initialized after field 'm_wallet_selector_label' [-Wreorder]
spinnerFrame(0),
Tree-SHA512: b81c8d4ac31b712c8dfaf941ba43b235eb466eb5528535d69d68c26d8706d2a658581513a413050e5dee08b72a4e7fc08bd8936ef5beb052059d2467eaeff84b
- C++11-ize the code (move initializers to class, change 0 to `nullptr` where appropriate)
- Make sure `m_wallet_selector` is initialized
- And fix the following warning:
bitcoin/src/qt/bitcoingui.cpp:122:5⚠️ field 'spinnerFrame' will be initialized after field 'm_wallet_selector_label' [-Wreorder]
spinnerFrame(0),
Most includers just wanted to react to pending shutdown.
This isolates access to `fRequestShutdown` and limits access to the shutdown
api functions, including the new `AbortShutdown` for setting it to `false`.
Note I originally called `AbortShutdown` `CancelShutdown` but that name was
already taken by winuser.h
https://travis-ci.org/bitcoin/bitcoin/jobs/386913329
This change also triggered a build error in bench. Fixing it required moving LIBBITCOIN_SERVER after LIBBITCOIN_WALLET in bench_bench_bitcoin_LDADD To make
server definitions in src/net.cpp available to wallet methods in
src/wallet/wallet.cpp. Specifically, solving:
libbitcoin_wallet.a(libbitcoin_wallet_a-wallet.o): In function `CWalletTx::RelayWalletTransaction(CConnman*)':
wallet.cpp:(.text+0x3f0e): undefined reference to `CConnman::NodeFullyConnected(CNode const*)'
collect2: error: ld returned 1 exit status
https://travis-ci.org/bitcoin/bitcoin/jobs/392133581
Need for remaining init.h includes confirmed via a thorough search with a more
specific regex:
\bInterrupt\(\)|\bShutdown\(\)|\bInitLogging\(\)|\bInitParameterInteraction\(\)|\bAppInitBasicSetup\(\)|\bAppInitParameterInteraction\(\)|\bAppInitSanityChecks\(\)|\bAppInitLockDataDirectory\(\)|\bAppInitMain\(\)|\bSetupServerArgs\(\)|\bLicenseInfo\(\)|g_wallet_init_interface|init.h
These were entirely unused, as based on successful compilation
and a grep for:
\bStartShutdown\(\)|\bShutdownRequested\(\)|\bInterrupt\(\)|\bShutdown\(\)|\bInitLogging\(\)|\bInitParameterInteraction\(\)|\bAppInitBasicSetup\(\)|\bAppInitParameterInteraction\(\)|\bAppInitSanityChecks\(\)|\bAppInitLockDataDirectory\(\)|\bAppInitMain\(\)|\bSetupServerArgs\(\)|\bLicenseInfo\(\)|g_wallet_init_interface|init.h
Fix a build error introduced in #13219.
```
.../bitcoin/src/bench/block_assemble.cpp:42:13:error: use of undeclared identifier 'CheckProofOfWork'
while (!CheckProofOfWork(block->GetHash(), block->nBits, Params().GetConsensus())) {
```
471a4992d4 Move rpc/util.cpp from libbitcoin-util to libbitcoin-server (Chun Kuan Lee)
Pull request description:
The functions in `rpc/util.cpp` would call functions in `script/standard.cpp` which in libbitcoin-common. This could cause problem if the linker does not strip out unused function while linking `bitcoin-cli`.
Tree-SHA512: 2f8335c880eeb00a29a359d5398a93d9f2909094b8febf2ad0a1e01388d077634fb5e72a638671bae8de89e1936c234d3f47ff445f1e456de723389bdc22d089
d92204c900 build: add warning to detect hidden copies in range-for loops (Cory Fields)
466e16e0e8 cleanup: avoid hidden copies in range-for loops (Cory Fields)
Pull request description:
Following-up on #13241, which was itself a follow-up of #12169.
See title. Fixing these would otherwise be a continuous process, adding the warning should keep them from cropping up.
Note that the warning seems to be Clang-only for now.
Tree-SHA512: ccfb769c3128b3f92c95715abcf21ee2496fe2aa384f80efead1529a28eeb56b98995b531b49a089f8142601389e63f7bb935963d724eacde4f5e1b4a024934b
af6ac3b677 doc: Remove mention of Qt4 from build docs (Wladimir J. van der Laan)
462c71f71b test: Update travis to not test Qt4 anymore (Wladimir J. van der Laan)
907f73bbc5 gui: Remove QT_VERSION fallbacks for Qt < 5 (Wladimir J. van der Laan)
bad068ad9f build: Build system changes to support only Qt5 (Wladimir J. van der Laan)
Pull request description:
Implements #8263.
Qt4.x has been EOL since 2015, and at least Gentoo has, or is going to drop support for it. I wouldn't be surprised if other Linux distributions follow.
This removes Qt4 detection from the build system, as well as removes all Qt4 fallbacks from the code. Turns out there's more than I expected: this is going to make maintenance of the GUI code, as well as adding new features significantly easier.
(I know there's still some references left to qt4 in RPM and Debian build script, but I don't have the knowledge how to fix them)
Tree-SHA512: d495924fd4dda6f6566ba44ee96be7cbe62e69ba1ca993b80a8449f78da852b7f1bd3e8200d57cfa1d72233c340eeff4596fb0032ecbddc715d99aea63817d3f
32d153fa36 For AVX2 code, also check for AVX, XSAVE, and OS support (Pieter Wuille)
Pull request description:
Fixes#12903.
Tree-SHA512: 01e71efb5d3a43c49a145a5b1dc4fe7d0a491e1e78479e7df830a2aaac57c3dcfc316e28984c695206c76f93b68e4350fc037ca36756ca579b7070e39c835da2
This change addresses a race condition where setnetworkactive=false wouldn't always disconnect all peers.
Before this change, the following could happen:
1. Thread A -- Begins connecting to a node.
2. Thread B -- Sets kNetworkActive=false and disconnects connected nodes.
3. Thread A -- Finishes connecting and adds node to list of connected nodes.
The node that was connected from Thread A remains connected and active,
even though kNetworkActive=false.
To fix the race, disconnections when kNetworkActive=false are now handled in the main network loop.
fixes#13038
f74894480 Only set fNewBlock to true in AcceptBlock when we write to disk (Matt Corallo)
fa6e49731 rpc: Avoid "duplicate" return value for invalid submitblock (MarcoFalke)
Pull request description:
This is #13395 with one more commit tacked on. MarcoFalke got tired of dealing with the stupidity of fixing a return code with too many rounds of review (not that I blame him). Honestly we should probably have no return whatsoever, but for now, this fixes it (as well as nLastBlockTime for eviction purposes).
Original description:
When `submitblock` of an invalid block, the return value should not be `"duplicate"`.
This is only seen when the header was previously found (denoted by the incorrectly named boolean `fBlockPresent`). Fix this bug by removing `fBlockPresent`.
Tree-SHA512: 0ce3092655d5d904b4c8c5ff7479f73ce387144a738f20472b8af132564005c6db5594ae366e589508f6258506ee7a28b1c7995a83a8328b334f99316006bf2d
Instead of comparing version numbers in the wallet to the client
version number, compare them to the latest supported wallet version
in the client. This allows for wallet version numbers to be unrelated
to the client version number.
faa18ca046 wallet: Erase wtxOrderd wtx pointer on removeprunedfunds (MarcoFalke)
Pull request description:
This prevents segfaults, when reading from the freed memory.
Tree-SHA512: 04f8190dea7901cf1cc298d5db98c83b02858f27114c5ef4da738accd176d6647d6b81f3dc39f3d5912b1a981cf0599370fd391c4154ffbde97afc1fac389123
fafa270328 Make ReceivedBlockTransactions return void (MarcoFalke)
Pull request description:
Instead of always returning `bool{true}` and forcing the caller to handle the return code, make it void and remove "a bunch" of dead code at the call sites.
Tree-SHA512: 10e41461c0516c0441d8b8eedcf6385874355c224b9e9d65e89addb142b4cf3e3be2d4ca0a7f2bd95c76aecdaa8537b6bd2d25631bf804bc42863ad5e84fa271
1e1eb6367f Improve coverage of SHA256 SelfTest code (Pieter Wuille)
Pull request description:
The existing SelfTest code does not cover the specialized double-SHA256-for-64-byte-inputs transforms added in #13191. Fix this.
Tree-SHA512: 593c7ee5dc9e77fc4c89e0a7753a63529b0d3d32ddbc015ae3895b52be77bee8a80bf16b754b30a22c01625a68db83fb77fa945a543143542bebb5b0f017ec5b
55771b7c6a Removed unused == operator from CMutableTransaction. (lucash.dev@gmail.com)
Pull request description:
This removes the unused == operator from `CMutableTransaction`.
The motivation is that unused code has a cost but offers no benefit (in general), while also adding the risk of introducing silent bugs. On top of that this particular code is quite inefficient, unnecessarily calculating the hash (it could, say, compare serializations). So if anyone ever needs to use a == comparison on `CMutableTransaction`, they'd be better of having to reimplement it (and add tests) than relying on code that's not being maintained.
Note: after this, trying to use the == operator on CMutableTransactions results in a compilation error:
```
./primitives/transaction.h:405:15: error: invalid operands to binary expression ('CMutableTransaction' and
'CMutableTransaction')
```
Tree-SHA512: a565af563e09d99347b6fe419f6d48c750b1377295af293a3e0c3c0d815e58aede8d7058987a68d66cfa7ed023e5d3285b12afabd17d0ff9cf11322ba3ce20fe
47776a958b Add linter: Make sure all shell scripts opt out of locale dependence using "export LC_ALL=C" (practicalswift)
3352da8da1 Add "export LC_ALL=C" to all shell scripts (practicalswift)
Pull request description:
~~Make sure `LC_ALL=C` is set when using `grep` range expressions.~~
Make sure `LC_ALL=C` is set in all shell scripts.
From the `grep(1)` documentation:
> Within a bracket expression, a range expression consists of two characters separated by a hyphen. It matches any single character that sorts between the two characters, inclusive, using the locale's collating sequence and character set. For example, in the default C locale, `[a-d]` is equivalent to `[abcd]`. Many locales sort characters in dictionary order, and in these locales `[a-d]` is typically not equivalent to `[abcd]`; it might be equivalent to `[aBbCcDd]`, for example. To obtain the traditional interpretation of bracket expressions, you can use the C locale by setting the `LC_ALL` environment variable to the value C.
Context: [Locale issue found when reviewing #13450](https://github.com/bitcoin/bitcoin/pull/13450/files#r194877736)
Tree-SHA512: fd74d2612998f9b49ef9be24410e505d8c842716f84d085157fc7f9799d40e8a7b4969de783afcf99b7fae4f91bbb4559651f7dd6578a6a081a50bdea29f0909
9b72c988a0 scripted-diff: Avoid temporary copies when looping over std::map (Ben Woosley)
Pull request description:
The ::value_type of the std::map/std::multimap/std::unordered_map containers is
std::pair<const Key, T>. Dropping the const results in an unnecessary copy,
for example in C++11 range-based loops.
For this I started with a more general scripted diff, then narrowed it down
based on the inspection showing that all actual map/multimap/unordered_map
variables used in loops start with m or have map in the name.
Tree-SHA512: b656d66b69ffa1eb954124aa8ae2bc5436ca50262abefa93bdda55cfcdaffc5ff90cd40539051a2bd06355ba69ddf245265cc8764eebff66d761b3aec06155a9
25bc9615b7 Document validationinterace callback blocking deadlock potential. (Matt Corallo)
Pull request description:
From the branches-I've-had-lying-around-and-forgot-to-PR department...
This is a comment-only PR, but the comments point out an API quirk that isn't exactly trivial. None of our use-cases right now hit this, but if we were to call SyncWithValidationInterfaceQueue (eg to limit queue depth) in ATMP, I'm pretty sure we'd hit a deadlock there.
Tree-SHA512: 889dd8fc9eb15d1f2aa5ca467e783bc8f07bc543b166b032741795b0db7a0df11a2846d3cb7c69bafa8d1acf970021001b742f52be06725a932813230c5b4a7b
86edf4a2a5 expose CBlockIndex::nTx in getblock(header) (Gregory Sanders)
Pull request description:
Recent publication of a weakness in Bitcoin's merkle tree construction demonstrates many SPV applications vulnerable to an expensive to pull off yet still plausible attack: https://bitslog.wordpress.com/2018/06/09/leaf-node-weakness-in-bitcoin-merkle-tree-design/
Including the coinbase in the txoutproof seems the most effective fix, however results in a significant efficiency downgrade. Transactors will not even know a priori what the size of their proof will be within a couple orders of magnitude, unless they use the mid-state of SHA2 as detailed in the blog post.
Some applications, like Elements blockchain platform that take SPV-style proofs have optional access to a bitcoind to verify these proofs of inclusion and check depth in the chain. Returning `CBlockIndex::nTx` would allow an extremely easy and compact way of checking the depth of the tree, with no additional overhead to the codebase, and works with pruned nodes.
`getblockheader` is arguably not the place for it, but as mentioned before, is a natural workflow for us checking depth of a block in a possibly pruned node.
We should also ensure that `verifytxoutproof` ends up validating this depth fact as well, but left this for another PR.
Tree-SHA512: af4cf48e704c6088f8da06a477fda1aaa6f8770cee9b876c4465d1075966d6a95831a88817673fe5a0d6bbcdc1ffcbc1892e2be0d838c60fc6958d33eacdcc14
c2dfbb4a97 Add unavailable options to hidden options category (Andrew Chow)
Pull request description:
From IRC:
```
<ossifrage> FYI, bitcoin-qt from the head I built today won't start if you have "daemon=0" in the config file, so you can't use the same config for either bitcoind or bitcoin-qt
<ossifrage> Seems like bitcoin-qt should ignore this option?
<provoostenator> ossifrage: probably caused by 13112. Another problem is disablewallet=1 will prevent a launch if you compile bitcoind without wallet. It probably needs to be relaxed slightly.
```
Adds all of the options that are unavailable due to compiling options to the hidden category so that shared config files do not break with the alternative binaries.
Tree-SHA512: 1ef43f5f7ad46ecc2865d22ee683ef22831e8f131ec99b732bb36d90381f7964bf64829595e993c2d435823fe4425a20323c8e65307cf2463a9e40b8049ab559
faf52f953b tests: Drop variadic macro (MarcoFalke)
Pull request description:
The C++11 constructor of `std::vector` that takes an initializer list, is not `explicit`. Thus, the macro is not required and can be dropped.
Hopefully fixes#13456
Tree-SHA512: 4095ed205f88138a7cd5b14790cc426899966f622a924a9b3f7de646a0d801a48ffb8921da760f1f93d5481298477c8a64dbec291381bb9aa77b075bdd2659f2
f6f8026e40 validation: check the specified number of blocks (off-by-one) (Karl-Johan Alm)
Pull request description:
```
echeveria | 2018-06-11 02:03:03.384975 Verifying last 3 blocks at level 3
echeveria | 2018-06-11 02:03:23.676793 No coin database inconsistencies in last 4 blocks (6564 transactions)
echeveria | off by one?
sipa | echeveria: possibly!
kallewoof | Looks like it checks one more block than suggested. `if (pindex->nHeight < chainActive.Height()-nCheckDepth) break;` should probably be `<=`.
sipa | kallewoof: agree
```
Post-commit:
```
2018-06-11T05:24:02Z Verifying last 6 blocks at level 3
2018-06-11T05:24:02Z [0%]...[16%]...[33%]...[50%]...[66%]...[83%]...[99%]...[DONE].
2018-06-11T05:25:07Z No coin database inconsistencies in last 6 blocks (7258 transactions)
```
Pre-commit:
```
2018-06-11T05:27:11Z Verifying last 6 blocks at level 3
2018-06-11T05:27:11Z [0%]...[16%]...[33%]...[50%]...[66%]...[83%]...[99%]...[DONE].
2018-06-11T05:27:12Z No coin database inconsistencies in last 7 blocks (9832 transactions)
```
Tree-SHA512: 6e68dc4ba74232518c2ba8ea624d65893534f3619d43ccdf0b9c65992f25b68cb52cf54fa35e6e3d092d1eee5c9a8887057828895f1acdafc0ebb48f683fffdc
Options that are not available (but known in the source code) will
cause an error if they are specified.
Make these options "available" by adding them to the hidden options
category to prevent conf files from failing when shared between binaries
that have different options available.
57ba401abc Enable double-SHA256-for-64-byte code on 32-bit x86 (Pieter Wuille)
Pull request description:
The SSE4 and AVX2 double-SHA256-for-64-byte input code from #13191 compiles fine on 32-bit x86 systems, but the autodetection logic in sha256.cpp doesn't enable it. Fix this.
Note that these instruction sets are only available on CPUs that support 64-bit mode as well, so it is only beneficial in the (perhaps unlikely) scenario where a 64-bit CPU is running a 32-bit Bitcoin Core binary.
Tree-SHA512: 39d5963c1ba8c33932549d5fe98bd184932689a40aeba95043eca31dd6824f566197c546b60905555eccaf407408a5f0f200247bb0907450d309b0a70b245102
fa7a6cf1b3 policy: Treat segwit as always active (MarcoFalke)
Pull request description:
Now that segwit is active for a long time, there is no need to reject transactions with the reason that segwit hasn't activated.
Strictly speaking, this is a bug fix, because with the release of 0.16, we create segwit transactions in our wallet by default without checking if they are allowed by local policy.
More broadly, this simplifies the code as if "premature witness" was always set to true with the corresponding command line args.
Tree-SHA512: 484c26aa3a66faba6b41e8554a91a29bfc15fbf6caae3d5363a3966283143189c4bd5333a610b0669c1238f75620691264e73f6b9f1161cdacf7574d946436da
e56771365b Do not use uppercase characters in source code filenames (practicalswift)
419a1983ca docs: Add a note about the source code filename naming convention (practicalswift)
Pull request description:
Add a note about the source code filename naming convention.
Tree-SHA512: 8d329bd9e19bcd26e74b0862fb0bc2369b46095dbd3e69d34859908632763abd7c3d00ccc44ee059772ad4bae4460c2bcc1c0e22fd9d8876d57e5fcd346cea4b
The only affect this should have is fixing the return code in
submitblock in cases where a block fails ContextualCheckBlock and
not setting nLastBlockTime on peers that provide blocks which fail
ContextualCheckBlock (which is only used in eviction and cosmetic).
The ::value_type of the std::map/std::multimap/std::unordered_map containers is
std::pair<const Key, T>. Dropping the const results in an unnecessary copy,
for example in C++11 range-based loops.
For this I started with a more general scripted diff, then narrowed it down
based on the inspection showing that all actual map/multimap/unordered_map
variables used in loops start with m or have map in the name.
-BEGIN VERIFY SCRIPT-
sed -i -E 's/for \(([^<]*)std::pair<([^c])(.+) : m/for (\1std::pair<const \2\3 : m/' src/*.cpp src/**/*.cpp
sed -i -E 's/for \(([^<]*)std::pair<([^c])(.+) : (.*)map/for (\1std::pair<const \2\3 : \4map/' src/*.cpp src/**/*.cpp
-END VERIFY SCRIPT-
16e3cd380a Clarify include recommendation (practicalswift)
6d10f43738 Enforce the use of bracket syntax includes ("#include <foo.h>") (practicalswift)
906bee8e5f Use bracket syntax includes ("#include <foo.h>") (practicalswift)
Pull request description:
When analysing includes in the project it is often assumed that the preferred bracket include syntax (`#include <foo.h>`) mentioned in `developer-docs.md` is used consistently. @sipa:s excellent circular dependencies script [`circular-dependencies.py`](50c69b7801/contrib/devtools/circular-dependencies.py) (#13228) is an example of a script making this reasonable assumption.
This PR enables automatic Travis checking of the include syntax making sure that the bracket syntax includes (`#include <foo.h>`) is used consistently.
Tree-SHA512: a414921aabe8e487ebed42f3f1cbd02fecd1add385065c1f2244cd602c31889e61fea5a801507ec501ef9bd309b05d3c999f915cec1c2b44f085bb0d2835c182
f77e1d34fd test: Add MempoolAncestryTests (Karl-Johan Alm)
a08d76bcfe mempool: Calculate descendant maximum thoroughly (Karl-Johan Alm)
6d3568371e wallet: Switch to using ancestor/descendant limits (Karl-Johan Alm)
6888195b06 wallet: Strictly greater than for ancestor caps (Karl-Johan Alm)
322b12ac4e Remove deprecated TransactionWithinChainLimit (Karl-Johan Alm)
4784751547 Switch to GetTransactionAncestry() in OutputEligibleForSpending (Karl-Johan Alm)
475a385a80 Add GetTransactionAncestry to CTxMemPool for general purpose chain limit checking (Karl-Johan Alm)
46847d69d2 mempool: Fix max descendants check (Karl-Johan Alm)
b9ef21dd72 mempool: Add explicit max_descendants (Karl-Johan Alm)
Pull request description:
Currently, `TransactionWithinChainLimit` is restricted to single-output use, and needs to be called every time for different limits. If it is replaced with a chain limit value calculator, that can be called once and reused, and is generally more flexible (see e.g. #12257).
Update: this PR now corrects usage of max ancestors / max descendants, including calculating the correct max descendant value, as advertised for the two limits.
~~This change also makes `nMaxAncestors` signed, as the replacement method will return `-1` for "not in the mempool", which is different from "0", which means "no ancestors/descendants in mempool".~~
~~This is a subset of #12257.~~
Tree-SHA512: aa59c849360542362b3126c0e29d44d3d58f11898e277d38c034dc4b86a5b4500f77ac61767599ce878c876b5c446fec9c02699797eb2fa41e530ec863a00cf9
67e0e04140 [wallet] [docs] Update release notes for removing `getlabeladdress` (John Newbery)
81608178cf [wallet] [rpc] Remove getlabeladdress RPC (John Newbery)
Pull request description:
labels are associated with addresses (rather than addresses being
associated with labels, as was the case with accounts). The
getlabeladdress does not make sense in this model, so remove it.
getaccountaddress is still supported for one release as the accounts
API is deprecated.
Tree-SHA512: 7f45d0456248ebcc4e54dd34e2578a09a8ea8e4fceda75238ccea9d731dc99a3f3c0519b18a9739de17d2e6e59c9c2259ba67c9ae2e3cb2a40ddb14b9193fe29
f68049dd87 crypto: cleanup sha256 build (Cory Fields)
Pull request description:
Requested by @sipa in #13386.
Rather than appending all possible cpu variants to all targets, create a convenience variable that encompasses all.
Tree-SHA512: 8e9ab2185515672b79bb7925afa4f3fbfe921bfcbe61456833d15457de4feba95290de17514344ce42ee81cc38b252476cd0c29432ac48c737c2225ed515a4bd
cbede7dbfd [qt] OptionsDialog: add prune setting (Sjors Provoost)
Pull request description:
The default suggested value is 2 GB. Minimum is 1 GB (550 MB rounded up).
When the user toggles this setting, a strong warning appears that undoing requires re-downloading the chain:
<img width="478" alt="schermafbeelding 2018-05-15 om 12 35 24" src="https://user-images.githubusercontent.com/10217/40051858-7939cc20-583c-11e8-9120-327a75376732.png">
Tooltip points out that actual disk usage can be higher. It's a bit vague on the "advanced features", because I'm assuming anyone who needs to use `-rescan` and `-txindex` will read the documentation, and a more detailed text would needlessly confuse everyone else.
<img width="450" alt="schermafbeelding 2018-05-15 om 12 33 51" src="https://user-images.githubusercontent.com/10217/40051791-49d6156a-583c-11e8-97b9-7de6dfd8c481.png">
The UI uses gigabytes for readability and easy of use. There is also no manual pruning UI (`prune=1`). The user will have to use `bitcoin.conf` for those things.
Fixes#6461. When combined with #13029 the user, after pruning their node, can safely reset settings and/or use bitcoind without having to edit `bitcoin.conf`. However I don't think that's an essential prerequisite.
Tree-SHA512: e17aff276d7235fbd40796adb6431d430620788a753ee13bc064abd35d2edc4280a3d3cddc18e42b4e00edff13ed18fd4f2a966c6f0b43b689afd13673e0c4bf
Instead of combining the -limitancestorcount and -limitdescendantcount into a nMaxChainLength, this commit uses each one separately in the coin eligibility filters.
The chain limits check for max descendants would check the descendants of the transaction itself even though the description for -limitdescendantcount says 'any ancestor'. This commit corrects the descendant count check by finding the top parent transaction in the mempool and comparing against that.
TransactionWithinChainLimits would take a 'limit' and check it against ascendants and descendants. This is changed to take an explicit
max ancestors and max descendants value, and to test the corresponding value against its corresponding max.
e9a1881b90 refactor: add a function for determining if a block is pruned or not (Karl-Johan Alm)
Pull request description:
The check for whether a block is pruned or not is sufficiently obscure that it deserves a macro. It is also used in 2 places, ~~with more coming, e.g. #10757~~ (turns out it was a move, not an addition).
Tree-SHA512: b9aeb60663e1d1196df5371d5aa00b32ff5d4cdea6a77e4b566f28115cce09570c18e45e4b81a4033f67c4135c8e32c027f67bae3b75c2ea4564285578a3f4dd
2acd1d6716 Drop uint 256 not operator (Ben Woosley)
Pull request description:
All the other operators are integer or bitwise operations, and this is unused
apart from tests.
Note attempting to call `!` on `arith_uint256` results in a build error after this change:
```
test/arith_uint256_tests.cpp:201:17: error: invalid argument type 'const arith_uint256' to unary expression
BOOST_CHECK(!ZeroL);
```
Tree-SHA512: 5791b643f426dac9829e9499d678786f1ad294edb2d840879252a1b642bda55941632114f64048660a5991a984aeba49eeb5dfe64ba0a6275cbe7b1c049d7095
ec3073a274 index: Move index DBs into index/ directory. (Jim Posen)
89eddcd365 index: Remove TxIndexDB from public interface of TxIndex. (Jim Posen)
2318affd27 MOVEONLY: Move BaseIndex to its own file. (Jim Posen)
f376a49241 index: Generalize logged statements in BaseIndex. (Jim Posen)
61a1226d87 index: Extract logic from TxIndex into reusable base class. (Jim Posen)
e5af5fc6fb db: Make reusable base class for index databases. (Jim Posen)
9b0ec1a7f9 db: Remove obsolete methods from CBlockTreeDB. (Jim Posen)
Pull request description:
This refactors most of the logic in TxIndex into a reusable base class for other indices. There are two commits moving code between files, which may be be more easily reviewed using `git diff --color-moved` (https://blog.github.com/2018-04-05-git-217-released/).
The motivation for this is to support BIP 157 by indexing block filters.
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.io/reviews/bitcoin/bitcoin/13243)
<!-- Reviewable:end -->
Tree-SHA512: 0857f04df2aa920178dab2eb8e57984d8eb4d5010deca9971190358479e05b6672ccca2a08af0a7ac9fe02afb947be84cf35a3693204d0667263c6add2959cbf
ebebedce20 speed up of tx_validationcache_tests by reusing of CTransaction. (lucash.dev@gmail.com)
Pull request description:
The code was converting CMutableTransaction to CTransaction multiple times, which implies recalculating the hash multiple times. This commit fixes this by reusing a single CTransaction.
Run-time results:
```
Before: 6.7s
After: 5.5s
--------------
Saved: 1.2s
```
This PR was split from #13050. Also, see #10026.
Tree-SHA512: 61fb81972a08299085a7d3d0060485b265aefc7a4f82ab548e5f94371c8643cfb97bf0ef34f4e1211bf853d0217fa1c3338e4117f36fda1b37d203f690e86d60
0231ef6c6d cli: Ignore libevent warnings (Cory Fields)
Pull request description:
Should fix rpc tests that fail due to an unclean stderr.
Untested as I'm not seeing these warnings. @promag mind seeing if this fixes your problem?
Tree-SHA512: fba5ae3f239b515e93e19f9c3eca659eb7fb21f1b1fec25b68285695bfd1ecbdcd9b2235543689aaf97bff85cbb762840f65365a67e791314e9a6b8db2c9e246
The code was converting CMutableTransaction to CTransaction multiple times, which implies recalculating the hash multiple times. This commit fixes this by reusing a single CTransaction.
ebec7317ca Drop the chain argument to GetDifficulty (Ben Woosley)
Pull request description:
By dropping the chain argument to `GetDifficulty`. `GetDifficulty` was called in two ways:
* with a guaranteed non-null blockindex
* with no argument
Change the latter case to be provided `chainActive.Tip()` explicitly.
Introduced in: #11748
Tree-SHA512: f2c97014be185f3e3de92db15848548650e4a67fab20a41bcfa851c5c63c245915cbe9380f84d9da2081e8756d31a41de417db1d35cfecf41ddb4f25070eb525
fa4760fbb3 qa: Increase includeconf test coverage (MarcoFalke)
Pull request description:
This adds some missing `return false` for error conditions and adds test coverage [1] for those.
Also, extend recursion warning when the chain was set in one of the includeconfs.
[1] See the red lines in https://marcofalke.github.io/btc_cov/total.coverage/src/util.cpp.gcov.html for missing coverage.
Tree-SHA512: d32563c9bb277879895a173e699034db5ecdb4061a1ec8890c566d61e36a09efa5eda19a029baf952ff6d568f8b9684a13a0bb90827850075470975e2088fee4
6aa33feadb Drop UpdateTransaction in favor of UpdateInput (Ben Woosley)
Pull request description:
Updating the input explicitly requires the caller to present a mutable
input, which more clearly communicates the effects and intent of the call
(and, often, the enclosing loop).
In most cases, this input is already immediately available and need not be
looked up.
Tree-SHA512: 8c7914a8b7ae975d8ad0e9d760e3c5da65776a5f79d060b8ffb6b3ff7a32235f71ad705f2185b368d9263742d7796bb562395d22b806d90e8502d8c496011e57
fa36aa7965 wallet: Prevent segfault when sending to unspendable witness (MarcoFalke)
Pull request description:
Previously we wouldn't care about the `txnouttype`, but after 4e91820531 we `switch` on the type.
Tree-SHA512: 6b597aba80cb43881671ad7b3a4ad97753864e8005a05c23fdd8ee79953483c08f241b5c392a9b494298eadc5cfba895b0480d916ef4f11d122fd6196f31b84a
4defdfab94 [MOVEONLY] Move unused Merkle branch code to tests (Pieter Wuille)
4437d6e1f3 8-way AVX2 implementation for double SHA256 on 64-byte inputs (Pieter Wuille)
230294bf5f 4-way SSE4.1 implementation for double SHA256 on 64-byte inputs (Pieter Wuille)
1f0e7ca09c Use SHA256D64 in Merkle root computation (Pieter Wuille)
d0c9632883 Specialized double sha256 for 64 byte inputs (Pieter Wuille)
57f34630fb Refactor SHA256 code (Pieter Wuille)
0df017889b Benchmark Merkle root computation (Pieter Wuille)
Pull request description:
This introduces a framework for specialized double-SHA256 with 64 byte inputs. 4 different implementations are provided:
* Generic C++ (reusing the normal SHA256 code)
* Specialized C++ for 64-byte inputs, but no special instructions
* 4-way using SSE4.1 intrinsics
* 8-way using AVX2 intrinsics
On my own system (AVX2 capable), I get these benchmarks for computing the Merkle root of 9001 leaves (supported lengths / special instructions / parallellism):
* 7.2 ms with varsize/naive/1way (master, non-SSE4 hardware)
* 5.8 ms with size64/naive/1way (this PR, non-SSE4 capable systems)
* 4.8 ms with varsize/SSE4/1way (master, SSE4 hardware)
* 2.9 ms with size64/SSE4/4way (this PR, SSE4 hardware)
* 1.1 ms with size64/AVX2/8way (this PR, AVX2 hardware)
Tree-SHA512: efa32d48b32820d9ce788ead4eb583949265be8c2e5f538c94bc914e92d131a57f8c1ee26c6f998e81fb0e30675d4e2eddc3360bcf632676249036018cff343e
db56755ca4 Fix "gmake check" under OpenBSD 6.3 (probably *BSD): Avoid using GNU grep specific regexp handling (practicalswift)
Pull request description:
Fixes#13337 (!)
GNU grep and BSD grep differs in the way they handle regexps when extended regular expressions are not enabled via the `-E` flag:
```
$ grep --version | head -1
grep (GNU grep) 3.1
$ echo "BOOST_FIXTURE_TEST_SUITE(foo)" | grep "BOOST_FIXTURE_TEST_SUITE(\|BOOST_AUTO_TEST_SUITE("
BOOST_FIXTURE_TEST_SUITE(foo)
$
```
```
$ grep --version | head -1
grep version 0.9
$ echo "BOOST_FIXTURE_TEST_SUITE(foo)" | grep "BOOST_FIXTURE_TEST_SUITE(\|BOOST_AUTO_TEST_SUITE("
$
```
The portable way to do it is:
```
$ echo "BOOST_FIXTURE_TEST_SUITE(foo)" | grep -E "(BOOST_FIXTURE_TEST_SUITE\\(|BOOST_AUTO_TEST_SUITE\\()"
BOOST_FIXTURE_TEST_SUITE(foo)
$
```
Tree-SHA512: d83c78f34421504dd8efc3921c98527f499045b702bd34715a5bc78e04ef2a5f49f601a55ad08632e870f137b1edada94a3f530291bc9107d8d6b16fe11e640b
493a166948 bench: Don't return a bool from main (Wladimir J. van der Laan)
Pull request description:
Return `1` from `main()` on error, not the bool `false` (introduced in #13112). This is the correct value to return on error, and also shuts up a clang warning.
Tree-SHA512: 52a0f1b2f6ae2697555f71ee2019ce657046f7f379f1f4faf3cce9d5f3fb21fcdc43a4c84895a2a8b6929997ba70bbe87c231f2f9553215b84c22333810d58d9
6b8b63af14 Generic TransactionSignatureCreator works with both CTransaction and CMutableTransaction (Martin Ankerl)
Pull request description:
Refactored `TransactionSignatureCreator` into a templated `GenericTransactionSignatureCreator` that works with both `CMutableTransaction` and `CTransaction`.
The advantage is that now in `SignSignature`, the `MutableTransactionSignatureCreator` can now operate directly with the `CMutableTransaction` without the need to copy the data into a `CTransaction`.
Running all unit tests brings a very noticable speedup on my machine:
48.4 sec before this change
36.4 sec with this change
--------
12.0 seconds saved
running only `--run_test=transaction_tests/test_big_witness_transaction`:
16.7 sec before this change
5.9 sec with this change
--------
10.8 seconds saved
This relates to my first attempt with the const_cast hack #13202, and to the slow unit test issue #10026.
Also see #13050 which modifies the tests but not the production code (like this PR) to get a speedup.
Tree-SHA512: 2cff0e9699f484f26120a40e431a24c8bc8f9e780fd89cb0ecf20c5be3eab6c43f9c359cde244abd9f3620d06c7c354e3b9dd3da41fa2ca1ac1e09386fea25fb
Return `EXIT_SUCCESS` from `main()` on error, not the bool `false`
(introduced in #13112). This is the correct value to return on error,
and also shuts up a clang warning.
Also add a final return for clarity.
903055730b Test gArgs erroring on unknown args (Andrew Chow)
4f8704d57f Give an error and exit if there are unknown parameters (Andrew Chow)
174f7c8080 Use a struct for arguments and nested map for categories (Andrew Chow)
Pull request description:
Following #13190, gArgs is aware of all of the command line arguments. This PR has gArgs check whether the arguments provided are actually valid arguments. When an unknown argument is encountered, an error is printed to stderr and the program exist.
Since gArgs is used for everything that has command line arguments, `bitcoind`, `bitcoin-cli`, `bitcoin-qt`, `bitcoin-tx`, and `bench_bitcoin` are all effected by this change and all now have the same argument checking behavior.
Closes#1044
Tree-SHA512: 388201319a7d6493204bb5433da47e8e6c8266882e809f6df45f86d925f1f320f2fd13edb3e57ffc6a37415dfdfc689f83929452bca224229783accb367032e7
4b62bdf513 Wallet: Refactor ReserveKeyFromKeyPool for safety (Ben Woosley)
Pull request description:
ReserveKeyFromKeyPool's previous behaviour is to set nIndex to -1 if the keypool is
empty, OR throw an exception for technical failures. Instead, we now return false
if the keypool is empty, true if the operation succeeded.
This is to make failure more easily detectable by calling code.
Tree-SHA512: 753f057ad13bd4c28d121f426bf0967ed72b827d97fb24582f9326ec60072abc5482e3db69ccada7c5fc66de9957fc59098432dd223fc4116991cab44c6d7aef
If an unknown option is given via either the command line args or
the conf file, throw an error and exit
Update tests for ArgsManager knowing args
Ignore unknown options in the config file for bitcoin-cli
Fix tests and bitcoin-cli to match actual options used
Instead of a single map with the category and name as the key,
make m_available_args contain maps. The key will be the category and
the value is a map which actually contains the arguments for that
category. The nested map's key is the argument name, while the value
is a struct that contains the help text and whether the argument is
a debug only argument.
c814e2e7e8 Remove template matching and pseudo opcodes (Pieter Wuille)
Pull request description:
The current code contains a rather complex script template matching engine, which is only used for 3 particular script types (P2PK, P2PKH, multisig). The first two of these are trivial to match for otherwise, and a specialized matcher for multisig is both more compact and more efficient than a generic one.
The goal is being more flexible, so that for example larger standard multisigs inside SegWit outputs are easier to implement.
As a side-effect, it also gets rid of the pseudo opcodes hack.
Tree-SHA512: 643b409c5c36821519f613a43efd399af0ec99b6131f35cd4024decfb2d483d719e0e921cd088bc9832a7ac797cb4a6b1158b8574c82f7fbebb75f1b31b359df
Templated version so that no copying of CMutableTransaction into a CTransaction is
necessary. This speeds up the test case transaction_tests/test_big_witness_transaction
from 7.9 seconds to 3.1 seconds on my machine.
Many options are extremely technical, and refer internals, making it
difficult to translate usefully. This came up in discussion of e.g.
#10949. If a message is not understood by translators (which are
typically end-users, not developers) they'll either translate it
literally, making it harder to understand instead of easier, with the
added drawback of the user no longer being able to google it.
Also the translation was only working for bitcoin-qt as with
the console programs, there is no translation backend. So it was
injecting never-used translation messages for bitcoin-cli, -tx.
For these reasons, stop translating options help completely. This should
not affect the output **in any way** except for bitcoin-qt when a
non-English language is configured in the locale.
This implements #10962.
The current code contains a rather complex script template matching engine,
which is only used for 3 particular script types (P2PK, P2PKH, multisig).
The first two of these are trivial to match for otherwise, and a specialized
matcher for multisig is both more compact and more efficient than a generic
one.
The goal is being more flexible, so that for example larger standard multisigs
inside SegWit outputs are more easy to implement.
As a side-effect, it also gets rid of the pseudo opcodes hack.
87fe292d89 doc: Mention disabling BIP61 in bips.md (Wladimir J. van der Laan)
fe16dd8226 net: Add option `-enablebip61` to configure sending of BIP61 notifications (Wladimir J. van der Laan)
Pull request description:
This commit adds a boolean option `-peersendreject`, defaulting to `1`, that can be used to disable the sending of [BIP61](https://github.com/bitcoin/bips/blob/master/bip-0061.mediawiki) `reject` messages. This functionality has been requested for various reasons:
- security (DoS): reject messages can reveal internal state that can be used to target certain resources such as the mempool more easily.
- bandwidth: a typical node sends lots of reject messages; this counts against upstream bandwidth. Also the reject messages tend to be larger than the message that was rejected.
On the other hand, reject messages can be useful while developing client software (I found them indispensable while creating bitcoin-submittx), as well as for our own test cases, so whatever the default becomes on the long run, IMO the functionality should be retained as option. But that's a discussion for later, for now it's simply a node operator decision.
Also adds a RPC test that checks the functionality.
Tree-SHA512: 9488cc53e13cd8e5c6f8eb472a44309572673405c1d1438c3488f627fae622c95e2198bde5ed7d29e56b948e2918bf1920239e9f865889f4c37c097c37a4d7a9
13c3a659c0 Qt/Bugfix: fix handling default wallet with no name (João Barbosa)
Pull request description:
If one loads a wallet via RPC (`loadwallet w2`), then select w2, select back to the default wallet (which is an empty string), that default wallet cannot be access through the RPC console because the current code only points to the wallet endpoint if the wallet name is not empty.
This is a quick fix that reenables accessing the default wallet in case an additional wallet has been loaded.
Using "" for the default wallet may not be ideal in other cases and it may make more sense to change it at a deeper level (wallet.cpp). See discussion here which where the reasons for the current behaviour in master:
https://github.com/bitcoin/bitcoin/pull/11687#issuecomment-370862718
@jnewbery @promag @ryanofsky
Tree-SHA512: 74b935886b4e4a6033a2f5e1f44bb69a252e31f4021e19a2054445a8e3e4db1d8ee256290850a84d8569d2d0e21412fce0170e7f0e881259156057587181ee05
c004ffc9b4 Make handling of invalid in IsMine more uniform (Pieter Wuille)
a53f0feff8 Add some checks for invalid recursion in IsMine (Pieter Wuille)
b5802a9f5f Simplify IsMine logic (Pieter Wuille)
4e91820531 Make IsMine stop distinguishing solvable/unsolvable (Pieter Wuille)
6d714c3419 Make coincontrol use IsSolvable to determine solvability (Pieter Wuille)
Pull request description:
Our current `IsMine` logic does several things with outputs:
* Determine "spendability" (roughly corresponding to "could we sign for this")
* Determine "watching" (is this an output directly or indirectly a watched script)
* Determine invalidity (is this output definitely not legally spendable, detecting accidental uncompressed pubkeys in witnesses)
* Determine "solvability" (would we be able to sign for this ignoring the fact that we may be missing some private keys).
The last item (solvability) is mostly unrelated and only rarely needed (there is just one instance, inside the wallet's coin control logic). This PR changes that instance to use the separate `IsSolvable` function, and stop `IsMine` from distinguishing between solvable and unsolvable.
As an extra, this also simplifies the `IsMine` logic and adds some extra checks (which wouldn't be hit unless someone adds already invalid scripts to their wallet).
Tree-SHA512: 95a6ef75fbf2eedc5ed938c48a8e5d77dcf09c933372acdd0333129fb7301994a78498f9aacce2c8db74275e19260549dd67a83738e187d40b5090cc04f33adf
2885c131b6 Qt: use [default wallet] as name for wallet with no name (Jonas Schnelli)
Pull request description:
Loading a wallet from a state where only the default wallet was active results in using an empty string for the initial/default wallet name.
This is a GUI only quick-fix that overrides wallet(s) with name "" to "[default wallet]". Does not affect `getwalletinfo` or `listwallets`.
Also, unsure if it should be fixed at a deeper level and if – instead of [default wallet] – it should use `wallet.dat` (the filename of the default wallet).
Tree-SHA512: 1d50dbb200b23df5ac53ce15aeb6453af4da354d6e6e53fe33ff075b477493254d6028b6d3569a7804b1aa616cb9a988a53de818937e37cdcb19cb70a90e2a88
fa9da85b7c qa: Initialize lockstack to prevent null pointer deref (MarcoFalke)
Pull request description:
It is currently impossible to call debug methods such as `AssertLock(Not)Held` on a thread without running into undefined behavior, unless a lock was pushed on the stack in this thread.
Initializing the global `lockstack` seems to fix both issues.
Tree-SHA512: 8cb76b22cb31887ddf15742fdc790f01e8f04ed837367d0fd4996535748d124342e8bfde68952b903847b96ad33406c64907a53ebab9646f78d97fa4365c3061
9e305b56f5 build: split warnings out of CXXFLAGS (Cory Fields)
Pull request description:
CXXFLAGS should not be modified anyway. Also, this will enable us to selectively disable warnings.
As discussed with @sipa on IRC. Intention is to be able to filter out warnings from leveldb code so that we can be more aggressive with what we enable.
Tree-SHA512: 1bf686250f7a59c0aff04371f87c5db4e8f5bde604c6ab75e568326fb6d7733f26b113fa52dc1c836fa10baa76770d479a0e5f82a4a1905947dd7f245e0560f4
Add a `createwallet` RPC to allow wallets to be created dynamically at
runtime. This functionality is currently only available through RPC and
newly created wallets will not be displayed in the GUI.
5f3cbde9de Increased max width of amount field to prevent number overflow bug. (Brandon Ruggles)
Pull request description:
Fixes#13231.
I was able to reproduce this bug within my own Fedora 27 VM. Following @jonasschnelli's advice, I first tried to change `setAlignment(Qt::AlignRight);` to `setAlignment(Qt::AlignLeft);`, however, I realized that this wouldn't fix the underlying overflow problem, as it would only make it easier to see the most significant digits under certain scenarios. The reason for the overflow is that Fedora uses plus and minus buttons on the Qt spin box class, rather than up and down arrows, which is what happens on **most** other operating systems. These plus and minus buttons take up more width, and therefore provide less space for text.
The solution I went with was the second suggestion by @jonasschnelli, which was to just increase the maximum width of the amount box. After some experimentation, 240 seemed to be the smallest max width that would allow as many digits as one would want in the amount box without overflow, even with the plus and minus buttons in Fedora.
Please let me know if there are any issues with this PR and I will work to fix them. Thank you!
Tree-SHA512: 155f34cec74af46ec1fe723a5241798d8e15607a4e1cdc493014dcc0ae9818a001c7901831168b5f26a6953ec5a992e4a67c57db1ad377bcf10f12941688ee93
97c112d4ca Declare TorReply parsing functions in torcontrol_tests (Ben Woosley)
Pull request description:
These methods are standalone string parsing methods which were included
into test via an include of torcontrol.cpp, which is bad practice.
~~Splitting them out reveals that they were the only torcontrol.cpp
methods under test, so the test file is renamed tor_reply_tests.cpp.~~
Introduced in #10408
Tree-SHA512: 8ff11a9c900a88f910a73dfe16f43581a567e9d60e9298a8a963fc9dd7cffb4d97a644da677610aafb7d89f1dd1cede9afeae2c6344305e021a9a322dbcea0ac
c865ee1e73 Fix FreeBSD build by including utilstrencodings.h (Wladimir J. van der Laan)
Pull request description:
`random.cpp` needs to explicitly include `utilstrencodings.h` to get `ARRAYLEN`. This fixes the FreeBSD build.
This was broken in 84f41946b9 (#13236).
Tree-SHA512: bdc2a28411ae217e40697c0315ef5a37cc2f5b6bc7bbde16684fb7343d1c1c620d67777a88e609a2190115edb08b823cfb5d31ed16356a7cb0d00c3b6f877c0e
80b4910f7d wallet: Use shared pointer to retain wallet instance (João Barbosa)
Pull request description:
Currently there are 3 places where it makes sense to retain a wallet shared pointer:
- `vpwallets`;
- `interfaces::Wallet` interface instance - used by the UI;
- wallet RPC functions - given by `GetWalletForJSONRPCRequest`.
The way it is now it is possible to have, for instance, listunspent RPC and in parallel unload the wallet (once #13111 is merged) without blocking. Once the RPC finishes, the shared pointer will release the wallet.
It is also possible to get all existing wallets without blocking because the caller keeps a local list of shared pointers.
This is mostly relevant for wallet unloading.
This PR replaces #11402.
Tree-SHA512: b7e37c7e1ab56626085afe2d40b1628e8d4f0dbda08df01b7e618ecd2d894ce9b83d4219443f444ba889096286eff002f163cb0a48f37063b62e9ba4ccfa6cce
0bf431870e net: Serve blocks directly from disk when possible (Wladimir J. van der Laan)
Pull request description:
In `ProcessGetBlockData`, send the block data directly from disk if type MSG_WITNESS_BLOCK is requested. This is a valid shortcut as the on-disk format matches the network format.
This is expected to increase performance because a deserialization and subsequent serialization roundtrip is avoided.
Tree-SHA512: 9a9500b4c1354eaae1a6f1c6ef2416c1c1985029852589266f3a70e808f6c7482c135e9ab251a527566935378ab7c32dba4ed43ba5451e802d8e72b77d1ba472
fac1223a56 Cache witness hash in CTransaction (MarcoFalke)
faab55fbb1 Make CMutableTransaction constructor explicit (MarcoFalke)
Pull request description:
This speeds up:
* compactblocks (v2)
* ATMP
* validation and miner (via `BlockWitnessMerkleRoot`)
* sigcache (see also unrelated #13204)
* rpc and rest (nice, but irrelevant)
This presumably slows down rescan, which uses a `CTransaction` and its `GetHash`, but never uses the `GetWitnessHash`. The slow down is proportional to the number of witness transactions in the rescan window. I.e. early in the chain there should be no measurable slow down. Later in the chain, there should be a slow down, but acceptable given the speedups in the modules mentioned above.
Tree-SHA512: 443e86acfcceb5af2163e68840c581d44159af3fd1fce266cab3504b29fcd74c50812b69a00d41582e7e1c5ea292f420ce5e892cdfab691da9c24ed1c44536c7
41d0476f62 Tests: Add data file (Anthony Towns)
4cbfb6aad9 Tests: Test new getblockstats RPC (Jorge Timón)
35e77a0288 RPC: Introduce getblockstats (Jorge Timón)
cda8e36f01 Refactor: RPC: Separate GetBlockChecked() from getblock() (Jorge Timón)
Pull request description:
It returns per block statistics about several things. It should be easy to add more if people think of other things to add or remove some if I went too far (but once written, why not keep it? EDIT: answer: not to test or maintain them).
The currently available options are: minfee,maxfee,totalfee,minfeerate,maxfeerate,avgfee,avgfeerate,txs,ins,outs (EDIT: see updated list in the rpc call documentation)
For the x axis, one can use height or block.nTime (I guess I could add mediantime if there's interest [EDIT: nobody showed interest but I implemented mediantime nonetheless, in fact there's no distinction between x or y axis anymore, that's for the caller to judge]).
To calculate fees, -txindex is required.
Tree-SHA512: 2b2787a3c7dc4a11df1fce62c8a4c748f5347d7f7104205d5f0962ffec1e0370c825b49fd4d58ce8ce86bf39d8453f698bcd46206eea505f077541ca7d59b18c
60ebc7da4c trivial: Mark overrides as such. (Daniel Kraft)
Pull request description:
This trivial change adds the `override` keyword to some methods that override virtual base class / interface methods. This ensures that any future changes to the interface's method signatures which are not correctly mirrored in the subclasses will break at compile time with a clear error message, rather than at runtime.
Tree-SHA512: cc1bfa5f03b5e29d20e3eab07b0b5fa2f77b47f79e08263dbff43e4f463e9dd8f4f537e2c8c9b6cb3663220dcf40cfd77723cd9fcbd623c9efc90a4cd44facfc
This removes the need to include rpc/blockchain.cpp in order to put
GetDifficulty under test. GetDifficulty was called in two ways:
* with a guaranteed non-null blockindex
* with no argument
Change the latter case to be provided chainActive.Tip() explicitly.
This trivial change adds the "override" keyword to some methods of
subclasses meant to override interface methods. This ensures that any
future change to the interface' method signatures which are not correctly
mirrored in the subclass will break at compile time with a clear error message,
rather than fail at runtime (which is harder to debug).
Updating the input explicitly requires the caller to present a mutable
input, which more clearly communicates the effects and intent of the method.
In most cases, this input is already immediately available and need not be
looked up.
9aac9f90d5 replace modulus with FastMod (Martin Ankerl)
Pull request description:
Not sure if this is optimization is necessary, but anyway I have some spare time so here it is. This replaces the slow modulo operation with a much faster 64bit multiplication & shift. This works when the hash is uniformly distributed between 0 and 2^32-1. This speeds up the benchmark by a factor of about 1.3:
```
RollingBloom, 5, 1500000, 3.73733, 4.97569e-07, 4.99002e-07, 4.98372e-07 # before
RollingBloom, 5, 1500000, 2.86842, 3.81630e-07, 3.83730e-07, 3.82473e-07 # FastMod
```
Be aware that this changes the internal data of the filter, so this should probably
not be used for CBloomFilter because of interoperability problems.
Tree-SHA512: 04104f3fb09f56c9d14458a6aad919aeb0a5af944e8ee6a31f00e93c753e22004648c1cd65bf36752b6addec528d19fb665c27b955ce1666a85a928e17afa47a
b0d2ca9fb6 wallet: Exit SyncMetaData if there are no transactions to sync (Wladimir J. van der Laan)
Pull request description:
Instead of crash with an assertion error, simply exit the function `SyncMetaData` if there is no metadata to sync.
Fixes#13110.
Tree-SHA512: 44c4789497b5b63963bef66d8b695987dde80764199f6ea0f2c974be19d29c2663f32446a663a2ee9029e143e5d1d9e8a591e52e6e7e795b982782626bec25bb
c722f00a7 [qt] Added satoshi unit "Satoshi (sat)" will be displayed in dropdowns and status bars. "sat" will be used when appended to numbers. (GreatSock)
4ddbcbf8c [qt] BitcoinUnits::format with zero decimals Formatting with zero decimals will now result in 123 instead of 123.0 (GreatSock)
Pull request description:
This adds satoshi as an additional amount unit for the GUI.
Tree-SHA512: c166c96c9a434b6ac700e1628e54f2dbb132c5232d949c0b464f61276a91d56f9bab4a62d50780535f1d34eaac6484f693a1e0611cd7c9d1ed5ebee066c0dd08
ReserveKeyFromKeyPool's previous behaviour is to set nIndex to -1 if the keypool is
empty, OR throw an exception for technical failures. Instead, we now return false
if the keypool is empty, true if the operation succeeded.
This is to make failure more easily detectable by calling code.
labels are associated with addresses (rather than addresses being
associated with labels, as was the case with accounts). The
getlabeladdress does not make sense in this model, so remove it.
getaccountaddress is still supported for one release as the accounts
API is deprecated.
cd53981 [docs] Add release notes for `loadwallet` RPC. (John Newbery)
a46aeb6 [wallet] [tests] Test loadwallet (John Newbery)
5d15260 [wallet] [rpc] Add loadwallet RPC (John Newbery)
876eb64 [wallet] Pass error message back from CWallet::Verify() (John Newbery)
e0e90db [wallet] Add CWallet::Verify function (John Newbery)
470316c [wallet] setup wallet background flushing in WalletInit directly (John Newbery)
59b87a2 [wallet] Fix potential memory leak in CreateWalletFromFile (John Newbery)
Pull request description:
Adds a `loadwallet` RPCs. This allows wallets to be loaded dynamically during runtime without having to stop-start the node with new `-wallet` params.
Includes functional tests and release notes.
Limitations:
- currently this functionality is only available through the RPC interface.
- wallets loaded in this way will not be displayed in the GUI.
Tree-SHA512: f80dfe32b77f5c97ea3732ac538de7d6ed7e7cd0413c2ec91096bb652ad9bccf05d847ddbe81e7cd3cd44eb8030a51a5f00083871228b1b9b0b8398994f6f9f1
dd435ad Add unit tests for signals generated by ProcessNewBlock() (Jesse Cohen)
a3ae8e6 Fix concurrency-related bugs in ActivateBestChain (Jesse Cohen)
ecc3c4a Do not unlock cs_main in ABC unless we've actually made progress. (Matt Corallo)
Pull request description:
Originally this PR was just to add tests around concurrency in block validation - those tests seem to have uncovered another bug in ActivateBestChain - this now fixes that bug and adds tests.
ActivateBestChain (invoked after a new block is validated) proceeds in steps - acquiring and releasing cs_main while incrementally disconnecting and connecting blocks to sync to the most work chain known (FindMostWorkChain()). Every time cs_main is released the result of FindMostWorkChain() can change - but currently that value is cached across acquisitions of cs_main and only refreshed when an invalid chain is explored. It needs to be refreshed every time cs_main is reacquired. The test added in 6094ce7304 will occasionally fail without the commit fixing this issue 26bfdbaddb
Original description below
--
After a bug discovered where UpdatedBlockTip() notifications could be triggered out of order (#12978), these unit tests check certain invariants about these signals.
The scheduler test asserts that a SingleThreadedSchedulerClient processes callbacks fully and sequentially.
The block validation test generates a random chain and calls ProcessNewBlock from multiple threads at random and in parallel. ValidationInterface callbacks verify that the ordering of BlockConnected BlockDisconnected and UpdatedBlockTip events occur as expected.
Tree-SHA512: 4102423a03d2ea28580c7a70add8a6bdb22ef9e33b107c3aadef80d5af02644cdfaae516c44933924717599c81701e0b96fbf9cf38696e9e41372401a5ee1f3c
The new `loadwallet` RPC method allows an existing wallet to be loaded
dynamically at runtime.
`unloadwallet` and `createwallet` are not implemented. Notably,
`loadwallet` can only be used to load existing wallets, not to create a
new wallet.
Pass an error message back from CWallet::Verify(), and call
InitError/InitWarning from WalletInit::Verify().
This means that we can call CWallet::Verify() independently from
WalletInit and not have InitErrors printed to stdout. It also means that
the error can be reported to the user if dynamic wallet load fails.
This allows a single wallet to be verified. Prior to this commit, all
wallets were verified together by the WalletInit::Verify() function at
start-up.
Individual wallet verification will be done when loading wallets
dynamically at runtime.
After a recent bug discovered in callback ordering in MainSignals,
this test checks invariants in ordering of
BlockConnected / BlockDisconnected / UpdatedChainTip signals
WalletInit::Start calls postInitProcess() for each wallet. Previously
each call to postInitProcess() would attempt to schedule wallet
background flushing.
Just start wallet background flushing once from WalletInit::Start().
60f61f9 Tighten up bech32::Decode(); add tests. (murrayn)
Pull request description:
Just a few minor optimizations to bech32::Decode():
1) optimize the order and logic of the conditionals
2) get rid of subsequent '(c < 33 || c > 126)' check which is redundant (already performed above)
3) add a couple more bech32 tests (mixed-case)
Tree-SHA512: e41af834c8f6b7d34c22c28b724df42c60f72e00df616e70a12efbc4271d15d80627fe1bc36845caf29f615c238499a566298a863cbe119fef457287231053c8
In `ProcessGetBlockData`, send the block data directly from disk if
type MSG_WITNESS_BLOCK is requested. This is a valid shortcut as the
on-disk format matches the network format.
This is expected to increase performance because a deserialization and
subsequent serialization roundtrip is avoided.
chain.h does not actually depend on the methods defined in pow.h, just its
include of consensus/params.h, which is standalone and can be included instead.
Confirmed by inspection and successful build.
f08a385590 [qt]: changes sendcoinsdialog's box layout for improved readability. (marcoagner)
Pull request description:
I'm addressing two (probably duplicate) issues: https://github.com/bitcoin/bitcoin/issues/11606 and https://github.com/bitcoin/bitcoin/issues/10613.
Some points worth noting:
- I've tried to balance the proposed changes on both issues without going too far and remaining a bit conservative. It will be easier to improve based on suggestions where necessary.
- I preferred to maintain a layout that doesn't ask for an address truncation because, in my view, this wallet should be conservative on this.
- I didn't follow the idea of aligning the amounts to the right for finding it more natural (and minimalist) to read the information without having to map alignments. Additionally, that approach seems to need more `<hr />`'s (or similar) in order to help the user to map information, which ended up cluttering the box too much (specially with multiple recipients). Thus, I preferred to just give some more space between recipients. Let me know if there are better ideas on this.
Visually, I went from this (current):
To this:
As a side note, while doing this, I thought about a better way to show fees and found there's already a PR on this (https://github.com/bitcoin/bitcoin/pull/12189) and thought it is
Tree-SHA512: e94b740fab6c1babd853a97be65c3b6f86ec174c975a926fde66b147f7a47e0cf0fa10f7255ba92aaba68c76a80dde8c688008179a34705a9799bf24d3c5cd46
159c32d1f1 Add assertion to guide static analyzers. Clang Static Analyzer needs this guidance. (practicalswift)
fd447a6efe Fix dead stores. Values were stored but never read. Limit scope. (practicalswift)
Pull request description:
Fix Clang Static Analyzer warnings reported by @kallewoof in #12961:
* Fix dead stores. Values were stored but never read.
* Add assertion to guide static analyzers. See #12961 for details.
Tree-SHA512: 83dbec821f45217637316bee978e7543f2d2caeb7f7b0b3aec107fede0fff8baa756da8f6b761ae0d38537740839ac9752f6689109c38a4b05c0c041aaa3a1fb
2352aa9 test: Ensure that recursive -includeconf produces appropriate warnings (Karl-Johan Alm)
c5bcc7d util: warn about recursive -includeconf arguments in configuration files (Karl-Johan Alm)
Pull request description:
This is a follow-up PR to #10267, and addresses https://github.com/bitcoin/bitcoin/pull/10267#issuecomment-387546144.
~~I am adding extra work for @jnewbery in #12755 here -- maybe I should just rebase on top of that, but not sure what the appropriate approach is here.~~
Tree-SHA512: 87f0c32436b70424e33616ffb88d7cb699f90d6a583a10237e224b28fc936d6a9df95536c8c52ee8546b3942da92b2a357e61bf87e00d1462bc10d46d3bee352
9e49db2 Make --enable-debug to pick better options (Evan Klitzke)
Pull request description:
Cherry-picked (and rebased) 94189645e67f364c4445d62e2b00c282d885cbbf from the "up for grabs" PR: "[build] Make --enable-debug pick better options" (#12695).
See previous review in #12695.
Tree-SHA512: a93cdadcf13e2ef8519acb1ce4f41ce95057a388347bb0a86a5c164dc7d0b0d14d4bb2a466082d5a100b8d50de65c605c40abaed555e8ea77c99e28800a34439
66b0b1b2a6 Add compile time checking for all cs_wallet runtime locking assertions (practicalswift)
Pull request description:
Add compile time checking for `cs_wallet` runtime locking assertions.
This PR is a subset of #12665. The PR was broken up to make reviewing easier.
The intention is that literally all `EXCLUSIVE_LOCKS_REQUIRED`/`LOCKS_EXCLUDED`:s added in this PR should follow either directly or indirectly from `AssertLockHeld(…)`/`AssertLockNotHeld(…)`:s already existing in the repo.
Consider the case where function `A(…)` contains `AssertLockHeld(cs_foo)` (without
first locking `cs_foo` in `A`), and that `B(…)` calls `A(…)` (without first locking `cs_main`):
* It _directly_ follows that: `A(…)` should have an `EXCLUSIVE_LOCKS_REQUIRED(cs_foo)` annotation.
* It _indirectly_ follows that: `B(…)` should have an `EXCLUSIVE_LOCKS_REQUIRED(cs_foo)` annotation.
Tree-SHA512: d561d89e98a823922107e56dbd493f0f82e22edac91e51e6422f17daf2b446a70c143b7b157ca618fadd33d0ec63eb7a57dde5a83bfdf1fc19d71459b43e21fd
b6f0b4d wallet: Improve logging when BerkeleyDB environment fails to close (Tim Ruffing)
264c643 wallet: Reset BerkeleyDB handle after connection fails (Tim Ruffing)
Pull request description:
According to the BerkeleyDB docs, the DbEnv handle may not be accessed
after close() has been called. This change ensures that we create a new
handle after close() is called. This avoids a segfault when the first
connection attempt fails and then a second connection attempt tries to
call open() on the already closed DbEnv handle.
Without the patch, bitcoindd reliably crashes in the second call to `set_lg_dir()` after `close()` if
there is an issue with the database:
```
2018-05-03T13:27:21Z Bitcoin Core version v0.16.99.0-a024a1841-dirty (debug build)
[...]
2018-05-03T13:27:21Z Using wallet directory /home/tim/.bitcoin
2018-05-03T13:27:21Z init message: Verifying wallet(s)...
2018-05-03T13:27:21Z Using BerkeleyDB version Berkeley DB 4.8.30: (April 9, 2010)
2018-05-03T13:27:21Z Using wallet wallet.dat
2018-05-03T13:27:21Z BerkeleyEnvironment::Open: LogDir=/home/tim/.bitcoin/database
2018-05-03T13:27:21Z BerkeleyEnvironment::Open: Error -30974 opening database environment: DB_RUNRECOVERY: Fatal error, run database recovery
2018-05-03T13:27:21Z Moved old /home/tim/.bitcoin/database to /home/tim/.bitcoin/database.1525354041.bak. Retrying.
2018-05-03T13:27:21Z BerkeleyEnvironment::Open: LogDir=/home/tim/.bitcoin/database ErrorFile=/home/tim/.bitcoin/db.log
[1] 14533 segmentation fault (core dumped) ./src/bitcoind
```
After the fix:
```
2018-05-03T17:19:32Z Bitcoin Core version v0.16.99.0-cc09e3bd0-dirty (release build)
[...]
2018-05-03T17:19:32Z Using wallet directory /home/tim/.bitcoin
2018-05-03T17:19:32Z init message: Verifying wallet(s)...
2018-05-03T17:19:32Z Using BerkeleyDB version Berkeley DB 4.8.30: (April 9, 2010)
2018-05-03T17:19:32Z Using wallet wallet.dat
2018-05-03T17:19:32Z BerkeleyEnvironment::Open: LogDir=/home/tim/.bitcoin/database ErrorFile=/home/tim/.bitcoin/db.log
2018-05-03T17:19:32Z scheduler thread start
2018-05-03T17:19:32Z BerkeleyEnvironment::Open: Error -30974 opening database environment: DB_RUNRECOVERY: Fatal error, run database recovery
2018-05-03T17:19:32Z Moved old /home/tim/.bitcoin/database to /home/tim/.bitcoin/database.1525367972.bak. Retrying.
2018-05-03T17:19:32Z BerkeleyEnvironment::Open: LogDir=/home/tim/.bitcoin/database ErrorFile=/home/tim/.bitcoin/db.log
2018-05-03T17:19:32Z Cache configuration:
2018-05-03T17:19:32Z * Using 2.0MiB for block index database
2018-05-03T17:19:32Z * Using 8.0MiB for chain state database
2018-05-03T17:19:32Z * Using 440.0MiB for in-memory UTXO set (plus up to 286.1MiB of unused mempool space)
2018-05-03T17:19:32Z init message: Loading block index..
[...]
```
Tree-SHA512: b809b318e5014ec47d023dc3dc40826b9706bfb211fa08bc2d29f36971b96caa10ad48d9a3f96c03933be46fa4ff7e00e952ac77bfffb6563767fb08aa4f23d6
a8da482 Bump wallet version for pre split keypool (Andrew Chow)
dfcd9f3 Use a keypool of presplit keys after upgrading to hd chain split (Andrew Chow)
5c50e93 Allow -upgradewallet to upgradewallets to HD (Andrew Chow)
2bcf2b5 Test sethdseed (Andrew Chow)
b5ba01a Add 'sethdseed' RPC to initialize or replace HD seed (Chris Moore)
dd3c07a Separate HaveKey function that checks whether a key is in a keystore (Andrew Chow)
Pull request description:
Revival/rebase of #11085
Adds a new command `sethdseed` which allows you to either set or generate a new HD seed to be used. A new keypool can be generated or the original one kept and new keys added to the keypool will come from the new HD seed.
Wallets that are not HD will be upgraded to be version FEATURE_HD_SPLIT when the `sethdseed` RPC command is used.
I have also add some tests for this.
Additionally `-upgradewallet` can now be used to upgrade a wallet from non-HD to HD. When it is used for such an upgrade, the keypool will be regenerated.
Tree-SHA512: e56c792e150590429ac4a1061e8d6f7b20cca06366e184eb9bbade4cd6ae82699a28fe84f87031eadba97ad2c1606517a105f00fb7b45779c979243020071adb
This commit adds a boolean option `-enablebip61`, defaulting to `1`, that
can be used to disable the sending of BIP61 `reject` messages. This
functionality has been requested for various reasons:
- security (DoS): reject messages can reveal internal state that can be
used to target certain resources such as the mempool more easily.
- bandwidth: a typical node sends lots of reject messages; this counts
against upstream bandwidth. Also the reject messages tend to be larger
than the message that was rejected.
On the other hand, reject messages can be useful while developing client
software (I found them indispensable while creating bitcoin-submittx),
as well as for our own test cases, so whatever the default becomes on the
long run, IMO the functionality should be retained as option. But that's
a discussion for later.
11fa6bb66e Bugfix: ensure consistency of m_failed_blocks after reconsiderblock (Suhas Daftuar)
Pull request description:
This was introduced in 015a5258ad and could cause a node to crash (due to assertion failure) when using the `reconsiderblock` rpc.
Tree-SHA512: 820dcd761bf983e36f5d0f16777ed75c833daaf62a6b3a4dbd17f6caaf9287223e3a202d06540ac62f8ba72926b73b0873bb76c6273ddcb19d9408f4c1cd325e
Bump the wallet version to indicate support for the pre split keypool.
Also prevents any wallets from upgrading to versions between HD_SPLIT
and PRE_SPLIT_KEYPOOL.
After upgrading to HD chain split, we want to continue to use keys
from the old keypool. To do this, before we generate any new keys after
upgrading, we mark all of the keypool entries as being pre-chain
split and move them to a separate pre chain split keypool. Keys are
fetched from that keypool until it is emptied. Only then are the new
internal and external keypools used.
Changes the maximum upgradewallet version to the latest wallet version
number, 159900. Non-HD wallets will be upgraded to use HD derivation.
Non HD chain split wallets will be upgraded to HD chain split.
If a non-HD wallet is upgraded to HD, the keypool will be entirely
regenerated.
Since upgradewallet is effectively run during a first run, all of the
first run initial setup stuff is combined with the upgrade to HD
If multiple threads are invoking ActivateBestChain, it was possible to have
them working towards different tips, and we could arrive at a less work tip
than we should. Fix this by introducing a ChainState lock which must
be held for the entire duration of ActivateBestChain to enforce
exclusion in ABC.
Technically, some internal datastructures may be in an inconsistent
state if we do this, though there are no known bugs there. Still,
for future safety, its much better to only unlock cs_main if we've
made progress (not just tried a reorg which may make progress).
364bae5 qa: Pad scriptPubKeys to get minimum sized txs (MarcoFalke)
7485488 Policy to reject extremely small transactions (Johnson Lau)
0f8719b Add transaction tests for constant scriptCode (Johnson Lau)
9dabfe4 Add constant scriptCode policy in non-segwit scripts (Johnson Lau)
Pull request description:
This disables `OP_CODESEPARATOR` in non-segwit scripts (even in an unexecuted branch), and makes a positive `FindAndDelete` result invalid. This ensures that the `scriptCode` serialized in `SignatureHash` is always the same as the script passing to the `EvalScript`.
Tree-SHA512: a0552cb920294d130251c48053fa2ff1fbdd26332e62b52147d918837852750f0ce35ce2cd1cbdb86588943312f8154ccb4925e850dbb7c2254bc353070cd5f8
a2f678d Bugfix: the end of a reorged chain is invalid when connect fails (Pieter Wuille)
Pull request description:
Introduced in 4e0eed88ac
When an invalid block is found during a reorg, we know the last of the blocks in the was-to-be-connected chain is invalid, but not necessarily the first. As `vpIndexToConnect` is ordered in decreasing height, the end of the reorg is the front of the vector, and not the back.
This only affected the warning system.
Tree-SHA512: ddf749f8a78083811a5a17152723f545c1463768d09dc9832ec3682e803a3c106fb768de9fa91c03aa95e644d4e41361a7e4ee791940fd7d51cdefea90de31fc
25b7ab9 doc: Add release notes for -includeconf (Karl-Johan Alm)
0f0badd test: Test includeconf parameter. (Karl-Johan Alm)
629ff8c -includeconf=<path> support in config handler, for including external configuration files (Karl-Johan Alm)
Pull request description:
Fixes: #10071.
Done:
- adds `-includeconf=<path>`, where `<path>` is relative to `datadir` or to the path of the file being read, if in a file
- protects against circular includes
- updates help docs
~~~Thoughts:~~~
- ~~~I am not sure how to test this in a neat manner. Feedback on this would be nice. Will dig/think though.~~~
Tree-SHA512: cb31f1b2f69fbc0890d264948eb2e501ac05cf12f5e06a5942f9c1539eb15ea8dc3cae817f4073aecb2fcc21d0386747f14f89d990772003a76e2a6d25642553
Introduced in 4e0eed88ac
When an invalid block is found during a reorg, we know the last of the blocks in
the was-to-be-connected chain is invalid, but not necessarily the first. As
vpIndexToConnect is ordered in decreasing height, the end of the reorg is the
front of the vector, and not the back.
This only affected the warning system.
16be13345 Fix rescanblockchain rpc to property report progress (Ben Woosley)
Pull request description:
Previously it assumed tip in all cases. This also extracts a RescanVerificationProgress helper object whose role is to manage reporting, in order to simplify ScanForWalletTransactions - more lines in total, but much simpler to follow the core logic.
Tree-SHA512: 5ebed0c56fae4ccfe613ff1d7082cb6da5a86635a8993ed3af70b500a4ea43074121aea9219b2f0321fbfeb7efcb964bdc2199297a64ca0fa85d9d07aa637d40
ddebde7 Add Windows shutdown handler (Chun Kuan Lee)
Pull request description:
Exit properly when clicked the red X of Windows Console
Tree-SHA512: f030edd08868390662b42abfa1dc6bd702166c6c19f5b1f8e7482e202451e79fb6f37ea672c26c2eb0d32c367bfca86160fbee624696c53828f280b7070be6a0
20ce5af Print a log message if we fail to shrink the debug log file (practicalswift)
29c9bdc Handle unsuccessful fseek(...):s (practicalswift)
Pull request description:
Handle unsuccessful `fseek(...)`:s.
**Note to reviewers:** What is the most appropriate course of actions for each of these unsuccessful `fseek(...)`:s?
Tree-SHA512: 5b3d82dbdd15d434d3f08dcb4df62888da4df8541d2586f56a4e529083005f6782c39e10645acd1ec403da83061bbfd8dbf2dddc66e09268d410ad0918c61876
43f3dec00 Remove enum specifier (to avoid re-declare scoped enum as unscoped) (donaloconnor)
Pull request description:
MSVC fails to compile with the changes made in #10742
The problem is enum types were changed to scoped (`enum class`) but in some places `enum` as an unscoped is used.
This is a very simple fix and I've tested it.
Edit: Had to remove enum altogether - `enum class` doesn't compile on clang.
Tree-SHA512: 13e21666243585a133c74c81249a1fa4098d6b7aa3cda06be871fa017c0ad9bb7b0725f801160b9d31678448d668718197941fd84702ebdef15128c27d92cd70
fad63eb [logging] Don't incorrectly log that REJECT messages are unknown. (John Newbery)
Pull request description:
Reject messages are logged to debug.log if NET debug logging is enabled.
Because of the way the `ProcessMessages()` function is structured,
processing for REJECT messages will also drop through to the default
branch and incorrectly log `Unknown command "reject" from peer-?`. Fix
that by exiting from `ProcessMessages()` early.
without this PR:
```
2018-05-03T17:37:00.930600Z received: reject (21 bytes) peer=0
2018-05-03T17:37:00.930620Z Reject message code 16: spammy spam
2018-05-03T17:37:00.930656Z Unknown command "reject" from peer=0
```
with this PR:
```
2018-05-03T17:35:04.751246Z received: reject (21 bytes) peer=0
2018-05-03T17:35:04.751274Z Reject message code 16: spammy spam
```
Tree-SHA512: 5c84c98433ab99e0db2dd481f9c2db6f87ff0d39022ff317a791737e918714bbcb4a23e81118212ed8e594ebcf098ab7f52f7fd5e21ebc3f07b1efb279b9b30b
Replaces the slow modulo operation with a much faster 32bit multiplication & shift. This works
because the hash should be uniformly distributed between 0 and 2^32-1. This speeds up the benchmark
by a factor of about 1.3:
RollingBloom, 5, 1500000, 3.73733, 4.97569e-07, 4.99002e-07, 4.98372e-07 # before
RollingBloom, 5, 1500000, 2.86842, 3.81630e-07, 3.83730e-07, 3.82473e-07 # FastMod
Be aware that this changes the position of the bits that are toggled, so this should probably
not be used for CBloomFilter which is serialized.
