face7220b7 qa: Move common args to bitcoin.conf (MarcoFalke)
Pull request description:
Beside removing duplicates of the same args in the code, this actually helps with debugging after a test failure.
For example, `bitcoin-qt` has `server` turned off, so you'd have to turn it on every time, if you wanted to debug a temporary test datadir created by the test framework.
Also, `keypool` would fill up if you forget to specify `-keypool=1`.
Tree-SHA512: 996bec8738dc0fce7297ab1fc5b4fbe3aa31b9b6241f8c4e685db728925363ccaca6145ad1edc6bee2f360e02ac4b9a53fcdff74eb79de90793393742d52b559
42e1b5d [test] Round target fee to 8 decimals in assert_fee_amount (Karl-Johan Alm)
Pull request description:
The output would produce arbitrary number of decimal points, sometimes resulting in 9 decimals:
```
AssertionError: Fee of 0.00000415 BTC too low! (Should be 0.000006175 BTC)
```
The above looks like the expected fee is 6175 sats when in reality it's 618.
Tree-SHA512: ddbff2926a88890d6e34a58db36f0b15a917a80064be6e40e9bcbec3f05ae6202d02adcd7873733945b043fa121d4a56dd930446ec368078fe1935cbfff898ce
Because the right-hand side of this comparison can be influenced
externally, e.g. via the -maxmempool argument, the existing mempool state,
host memory usage, etc.
Allow importmulti RPC to apply address labels when importing standard
scriptPubKeys. This makes the importmulti RPC less finnicky about import
formats and also simpler internally.
The output would produce arbitrary number of decimal points, sometimes resulting in 9 decimals:
AssertionError: Fee of 0.00000415 BTC too low! (Should be 0.000006175 BTC)
The above looks like the expected fee is 6175 sats when in reality it's 618.
Splits signrwatransaction into a wallet version (signrawtransactionwithwallet) and
non-wallet version (signrawtransactionwithkey). signrawtransaction is marked as DEPRECATED
and will call the right signrawtransaction* command as per the parameters in order to
maintain compatibility.
Updated signrawtransactions test to use new RPCs
b22cce014 scripted-diff: validateaddress to getaddressinfo in tests (Andrew Chow)
b98bfc5ed Create getaddressinfo RPC and deprecate parts of validateaddress (Andrew Chow)
1598f3230 [rpc] Move DescribeAddressVisitor to rpc/util (John Newbery)
39633ecd5 [rpc] split wallet and non-wallet parts of DescribeAddressVisitor (John Newbery)
Pull request description:
This PR makes a new RPC command called `getaddressinfo` which relies on the wallet. It contains all of `validateaddress`'s address info stuff. Those parts in `validateaddress` have been marked as deprecated. The tests have been updated to use `getaddressinfo` except the `disablewallet` test which is the only test that actually uses `validateaddress` to validate an address.
Tree-SHA512: ce00ed0f2416200b8de1e0a75e8517c024be0b6153457d302c3879b3491cce28191e7c29aed08ec7d2eeeadc62918f5c43a7cb79cd2e4b6d9291bd83ec31c852
e710387ca9 test: Fix bip68 sequence test to reflect updated rpc error message (Ben Woosley)
Pull request description:
The message changed in #12356, but this test is in the extended test suite, so it didn't fail on CI.
Tree-SHA512: ce800e2636ab7bbba7876aa533e1684e75c37a7d2a119f9c4602fd89ac9215e2e28710a1f27feb642b6737ed858da049ebc52fdd476ff4637e3ac3bb1d8399ce
Change all instances of validateaddress to getaddressinfo since it seems that
no test actually uses validateaddress for actually validating addresses.
-BEGIN VERIFY SCRIPT-
find ./test/functional -path '*py' -not -path ./test/functional/wallet_disable.py -not -path ./test/functional/rpc_deprecated.py -not -path ./test/functional/wallet_address_types.py -exec sed -i'' -e 's/validateaddress/getaddressinfo/g' {} \;
-END VERIFY SCRIPT-
Moves the parts of validateaddress which require the wallet into getaddressinfo
which is part of the wallet RPCs. Mark those parts of validateaddress which
require the wallet as deprecated.
Validateaddress will call getaddressinfo
for the data that both share for right now.
Moves IsMine functions to libbitcoin_common and then links libbitcoin_wallet
before libbitcoin_common in order to prevent linker errors since IsMine is no
longer used in libbitcoin_server.
65682da [tests] bind functional test nodes to 127.0.0.1 (Sjors Provoost)
Pull request description:
Prevents OSX firewall allow-this-application-to-accept-inbound-connections permission popups and is generally safer.
To test, make an arbitrary whitespace change to `src/bitcoind.cpp` and recompile. This normally resets the firewall's memory.
Easiest way to reproduce a popup without running the test suite:
```sh
src/bitcoind -regtest -bind=127.0.0.1 # No popup
src/bitcoind -regtest # Popup
```
Tree-SHA512: ffa92f148a2ead2ceca978c285882979639be23eb31ad6a27aa81df9fdddba5d493719c92c09a351a81d638f6f739c351a721e42168d77ead60abe074df773d6
bb00c95 Consistently use FormatStateMessage in RPC error output (Ben Woosley)
8b8a1c4 Add test for 'mempool min fee not met' rpc error (Ben Woosley)
c04e0f6 Fix 'mempool min fee not met' debug output (Ben Woosley)
Pull request description:
Output the value that is tested, rather than the unmodified fee value.
Prompted by looking into: #11955
Tree-SHA512: fc0bad47d4af375d208f657a6ccbad6ef7f4e2989ae2ce1171226c22fa92847494a2c55cca687bd5a1548663ed3313569bcc31c00d53c0c193a1b865dd8a7657
[tests] update tests from changes to mininode in #11771 - added by @conscott
[tests] trivial update to hex conversion for readability - added by @conscott
95e2e9a [tests] Change invalidtxrequest to use BitcoinTestFramework (John Newbery)
359d067 [tests] Fix flake8 warnings in invalidtxrequest (John Newbery)
c32cf9f [tests] Add P2PDataStore class (John Newbery)
cc046f6 [tests] Reduce NodeConn connection logging from info to debug (John Newbery)
Pull request description:
Next step in #10603
- first commit changes log level for an internal log from INFO to DEBUG. (Not really related, but I started finding the INFO level logging annoying when debuging test failures)
- second commit introduces a `P2PStub` class - a subclass of `NodeConnCB` which has its own block and tx store and responds appropriately to getdata requests. Not all the functionality is used in `invalidtxrequest.py`, but will be used in `invalidblockrequest.py` and `p2p-fullblocktest` when those are changed to use `BitcoinTestFramework`
- third commit tidies up `invalidtxrequest.py`
- fourth commit removes usage of `ComparisonTestFramework`
Tree-SHA512: f3085c73c15d6ce894e401490bce8a7fa7cf52b0c9d135ff7e351f1f6f517c99accab8588fcdc443f39ea8315329aaabd66b2baa32499df5a774737882030373
faefd29 qa: Prepare functional tests for Windows (MarcoFalke)
Pull request description:
* Pass `sys.executable` when calling a python script via the subprocess
module
* Don't remove the log file while it is still open and written to
* Properly use os.pathsep and os.path.sep when modifying the PATH
environment variable
* util-tests: Use os.path.join for Windows compatibility
Ref: #8227
Tree-SHA512: c507a536af104b3bde4366b6634099db826532bd3e7c35d694b5883c550920643b3eab79c76703ca67e1044ed09979e855088f7324321c8d52112514e334d614
fa795cf wallet: Disallow abandon of conflicted txes (MarcoFalke)
Pull request description:
Abandon transactions that are already conflicted is a noop, so don't try and return false/throw instead.
Tree-SHA512: fd2af4149bd2323f7f31fe18685c763790b8589319b4e467b464ab456d5e8971501ab16d124e57a22693666b06ae433ac3e59f0fd6dfbd2be2c6cae8be5bcbd8
a9d0ebc262 Enable flake8 warnings for all currently non-violated rules (practicalswift)
4cbab15e75 tests: Fix accidental redefinition of previously defined variable via list comprehension (practicalswift)
0b9207efbe Enable flake8 warning for "list comprehension redefines 'foo' from line N" (F812) (practicalswift)
Pull request description:
* Enable `flake8` warnings for all currently non-violated rules
* Fix accidental redefinition via list comprehension
Tree-SHA512: 738b87789e99d02abb2c6b8ff58f65c0cbfeb93e3bf320763e033e510ebd0a4f72861bc8faaf42c14a056a5d4659c33dc70a63730a32cc15159559427bf21193
db1cbcc [RPC] Remove deprecated addmultisigaddress return format (John Newbery)
cb28a0b [RPC] Remove deprecated createmultisig object (John Newbery)
ed45c82 [tests] Remove test for deprecated createmultsig option (John Newbery)
d066a1c [rpc] Remove deprecated getmininginfo RPC option (John Newbery)
c6f09c2 [rpc] remove deprecated estimatefee RPC (John Newbery)
a8e437a [tests] Remove estimatefee from rpc_deprecated.py test (John Newbery)
a5623b1 [tests] Remove tests for deprecated estimatefee RPC (John Newbery)
d119f2e [tests] Fix style warnings in feature_fee_estimation.py (John Newbery)
Pull request description:
There were some RPC/RPC options deprecated in v0.16. Those can now be removed from master since v0.16 has been branched.
- `estimatefee` RPC has been removed. The `feature_fee_estimation.py` test has been updated to remove the RPC, but doesn't yet have good coverage of the replacement RPC `estimatesmartfee`. Improving the test coverage should be done in a new PR. (#11031)
- the `errors` field returned by `getmininginfo` has been deprecated and replaced by a `warning` field. (#10858)
- providing addresses as inputs to `createmultisig` has been deprecated. Users should use `addmultisigaddress` instead (#11415)
- The return format from `addmultisigaddress` has changed (#11415)
`getwitnessaddress` was also deprecated in v0.16 and can be removed, but many tests are using that RPC, so it's a larger job to remove. It should be removed in a separate PR (possibly after #11739 and #11398 have been merged and the segwit test code tidied up)
Tree-SHA512: 8ffaa5f6094131339b9e9e468e8b141de4b144697d2271efa2992b80b12eb97849ade3da8df5c1c9400ed4c04e6a029926550a3e5846d2029b644f9e84ac7124
45eea40 Bech32 addresses in dumpwallet (fivepiece)
Pull request description:
Output bech32 addresses in dumpwallet if address type is not as legacy
Tree-SHA512: f6b6f788293779fe6339b94d9b792180e1d1dcb9c8e826caef8693557e1710213ba57891981c17505ace8d67b407eeca6fd9a8825757dd292cca2aa12575d15c
7444149 Document method for reviewers to verify chainTxData (John Newbery)
Pull request description:
This commit adds the final block hash of the window to getchaintxstats
and documents how reviewers can verify changes to chainTxData.
Tree-SHA512: d16abb5f47d058e52660f4d495f1e453205b1b83716d7c810ff62a70338db721386c1808ec1fc8468f514e4d80cc58e3c96eeb3184cbbcb1d07830fa5e53f342
9bb59cf7ba QA: segwit.py: s/find_unspent/find_spendable_utxo/ (Jorge Timón)
Pull request description:
Separated from #8994
It was found out testing that PR but I think this fix should be done even without #8994 the fix is not necessary by luck. Unless I'm missing something.
Tree-SHA512: ba1a970e674878ae2f27ee8bba372fa3b42dafff682374f50e5ddc9896fd8808fef2b2b70c7028f2a7b0dbea9f3e29a757e2cde98970f5761bf414455ba02c09
The specific length of the uacomment is one shorter on `0.16.0` than on
`0.15.99` causing the (stupid) test to fail.
Just match the latter part of the message only.
125f4a4909 [tests] Require all tests to follow naming convention (Anthony Towns)
Pull request description:
Based on top of #11774
Tree-SHA512: 1eb156b5a97b30c203b7b0ad3d2055b391ef825e2e57805c7745b5259a9b1caaa115768ec225452f12f354e550f83e071f9c6fee2c36698b4679191895aab8de
ee11121 Add special error for genesis coinbase to gettransaction (MeshCollider)
Pull request description:
Suggested by sipa here: https://botbot.me/freenode/bitcoin-core-dev/2018-01-23/?msg=96069825&page=2
Just adds a special error message for the genesis block coinbase transaction when using `getrawtransaction`
Tree-SHA512: cd102c7983ec5457b299bff4b6db747d339fda157933a3ac54aec26b1e48b115aa68c1c9e6cb7a916f15c7786273ab558b2b20ab9768544d211e0ae9d1480e34
Makes following changes to fix and tidy up p2p-versionbits-warning.py:
- add node alias in the run() method
- call versionbits_in_alert_file() in a wait_until loop.
- don't clear out the alert.txt file
- explicitly comment why the node needs to be stop-started
- Verify that the node is out of IBD after stop-start (nodes in IBD do
not generate alert messages)
- no need to subclass P2PInterface
* Pass `sys.executable` when calling a python script via the subprocess
module
* Don't remove the log file while it is still open and written to
* Properly use os.pathsep and os.path.sep when modifying the PATH
environment variable
* util-tests: Use os.path.join for Windows compatibility
16f6f59dc [qa] Test fundrawtransaction with change_type option (João Barbosa)
536ddeb17 [rpc] Add change_type option to fundrawtransaction (João Barbosa)
31dbd5af4 [wallet] Add change type to CCoinControl (João Barbosa)
Pull request description:
Adds a new option `change_type` to `fundrawtransaction` RPC. This is useful to override the node `-changetype` argument.
The new option is exclusive to `changeAddress` option, setting both raises a RPC error.
See also #11403, #12119.
Tree-SHA512: 654686444f6125e37015a62f167064d54ec335701534988447be4687fa5ef9c7980a8a07cc0a03fff6ea6c4c1abf0f77a8843d535c4f3fe0bf93f968a4e676e6
596c446 [wallet] use P2WPKH change output if any destination is P2WPKH or P2WSH (Sjors Provoost)
Pull request description:
If `-changetype` is not explicitly set, then regardless of `-addresstype`, the wallet will use a ~`bech32` change address~ `P2WPKH` change output if any destination is `P2WPKH` or `P2WSH`.
This seems more intuitive to me and more in line with the spirit of [BIP-69](https://github.com/bitcoin/bips/blob/master/bip-0069.mediawiki).
When combined with #11991 a QT user could opt to use `bech32` exclusively without having to figure out how to launch with `-changetype=bech32`, although so would #11937.
Tree-SHA512: 9238d3ccd1f3be8dfdd43444ccf45d6bdc6584ced3172a3045f3ecfec4a7cc8999db0cdb76ae49236492a84e6dbf3a1fdf18544d3eaf6d518e1f8bd241db33e7
fae7b14a04 qa: Make TestNodeCLI command optional in send_cli (MarcoFalke)
ffffb10a9f qa: Rename cli.args to cli.options (MarcoFalke)
Pull request description:
Makes the `command` optional, since there are valid bitcoin-cli calls that have no `command`:
* `bitcoin-cli -?`
* `bitcoin-cli -getinfo`
* ...
Also, rename self.args to self.options, since that is the name in the `bitcoin-cli -help` documentation.
Tree-SHA512: f49c06024e78423301d70782946d47c0fb97a26876afba0a1f71ed329f5d7124aee4c2df520c7af74079bf9937851902f7be9c54abecc28dc29274584804d46c
1df206f Disallow using addresses in createmultisig (Andrew Chow)
Pull request description:
This PR should be the last part of #7965.
This PR makes createmultisig only accept public keys and marks the old functionality of accepting addresses as deprecated.
It also splits `_createmultisig_redeemscript` into two functions, `_createmultisig_getpubkeys` and `_createmultisig_getaddr_pubkeys`. `_createmultisig_getpubkeys` retrieves public keys from the RPC parameters and `_createmultisig_getaddr_pubkeys` retrieves addresses' public keys from the wallet. `_createmultisig_getaddr_pubkeys` requires the wallet and is only used by `addwitnessaddress` (except when `createmultisig` is used in deprecated mode).
`addwitnessaddress`'s API is also changed. Instead of returning just an address, it now returns the same thing as `createmultisig`: a JSON object with two fields, address and redeemscript.
Tree-SHA512: a5796e41935ad5e47d8165ff996a8b20d5112b5fc1a06a6d3c7f5513c13e7628a4fd37ec30fde05d8b15abfed51bc250710140f6834b13f64d0a0e47a3817969
ec527c6 Don't allow relative -walletdir paths (Russell Yanofsky)
Pull request description:
This makes it an error to explicitly specify a non-absolute -walletdir path, and also adds a debug.log warning if a relative rather than absolute -datadir path is configured.
Specifying paths relative to the current working directory in a daemon process can be dangerous, because files can fail to be located even if the configuration doesn't change, but the daemon is started up differently.
Specifying a relative -datadir now adds a warning to the debug log. It would not be backwards-compatible to forbid relative -datadir paths entirely, and it could also be inconvenient for command line testing.
Specifying a relative -walletdir now results in a startup error. But since the -walletdir option is new in 0.16.0, there should be no compatibility issues. Another reason not to use working directory paths for -walletdir specifically is that the default -walletdir is a "wallets" subdirectory inside the datadir, so it could be surprising that setting -walletdir manually would choose a directory rooted in a completely different location.
Tree-SHA512: 67cbdae677f82487a9031c5ec96b0205a488ab08718a0f4f49365e025119f3d7f6cfc88ba1eba04c1ecd8b9561a5b2c42e2e1a267af7c08c76b83e5e361f5a31
Also warn if bitcoind is configured to use a relative -datadir path.
Specifying paths relative to the current working directory in a daemon process
can be dangerous, because files can fail to be located even if the
configuration doesn't change, but the daemon is started up differently.
Specifying a relative -datadir now adds a warning to the debug log. It would
not be backwards-compatible to forbid relative -datadir paths entirely, and it
could also be also inconvenient for command line testing.
Specifying a relative -walletdir now results in a startup error. But since the
-walletdir option is new in 0.16.0, there should be no compatibility issues.
Another reason not to use working directory paths for -walletdir specifically
is that the default -walletdir is a "wallets" subdirectory inside the datadir,
so it could be surprising that setting -walletdir manually would choose a
directory rooted in a completely different location.
fa1e69e qa: Sync with validationinterface queue in sync_mempools (MarcoFalke)
Pull request description:
Commit e545dedf72 moved `TransactionAddedToMempool` to the background scheduler thread. Thus, adding a transaction to the mempool will no longer add it to the wallet immediately. Functional tests, that `sync_mempools` and then call into wallet rpcs will race against the scheduler thread.
Fix that race by flushing the scheduler queue.
Fixes#12205; Fixes#12171;
References #9584;
Tree-SHA512: 14d99cff9c4756de9fad412f04e6d8e25bb9a0938f24ed8348de79df5b4ee67763dac5214b1a69e77e60787d81ee642976d1482b1b5637edfc4892a238ed22af
134cdc7 Test walletpassphrase timeout bounds and clamping (Andrew Chow)
0b63e3c Clamp walletpassphrase timeout to 2^(30) seconds and check its bounds (Andrew Chow)
Pull request description:
Fixes#12100
Makes the timeout be clamped to 2^30 seconds to avoid the issue with sign flipping with large timeout values and thus relocking the wallet instantly. Unlocking for at most ~34 years should be sufficient.
Also checks that the timeout is not negative to avoid instant relocks.
Tree-SHA512: 426922f08c54e323d259e25dcdbebc2cd560708a65111ce6051493a7e7c61e79d9da1ea4026cc0d68807d728f5d7c0d7c58168c6ef4167b94cf6c2877af88794
5fecd84 [tests] Remove redundant import in blocktools.py test (Anthony Towns)
9b20bb4 [tests] Check tests conform to naming convention (Anthony Towns)
7250b4e [tests] README.md nit fixes (Anthony Towns)
82b2712 [tests] move witness util functions to blocktools.py (John Newbery)
1e10854 [tests] [docs] update README for new test naming scheme (John Newbery)
Pull request description:
Splitting #11774 into two parts -- this part updates the README with the proposed naming convention, and adds some checks to test_runner.py that the number of tests violating the naming convention doesn't increase too much. Idea is this part of the change should not introduce merge conflicts or require much rebasing, so reviews of the complicated bits won't become invalidated too often; while the second part will just be file renames, which will require regular rebasing and will introduce merge conflicts with pending PRs, but can be merged later, and should also be much easier to review, since it will only include relatively trivial changes.
Tree-SHA512: b96557d41714addbbfe2aed62fb5a48639eaeb1eb3aba30ac1b3a86bb3cb8d796c6247f9c414c4695c4bf54c0ec9968ac88e2f88fb62483bc1a2f89368f7fc80
a14dbff39e Allow multiwallet.py to be used with --usecli (Russell Yanofsky)
f6ade9ce1a [tests] allow tests to be run with --usecli (John Newbery)
ff9a363ff7 TestNodeCLI batch emulation (Russell Yanofsky)
ca9085afc5 Prevent TestNodeCLI.args mixups (Russell Yanofsky)
fcfb952bca Improve TestNodeCLI output parsing (Russell Yanofsky)
Pull request description:
Lack of test coverage was pointed out by @jnewbery in https://github.com/bitcoin/bitcoin/pull/11687#discussion_r158133900
Tree-SHA512: 5f10e31abad11a5edab0da4e2515e39547adb6ab9e55e50427ab2eb7ec9a43d6b896b579b15863e5edc9beee7d8bf1c84d9dabd247be0760a1b9ae39e1e8ee02
Make createmultisig only accept public keys with the old functionality
marked as deprecated.
Splits _createmultisig_redeemscript into two functions, one for
getting public keys from UniValue and one for getting addresses
from UniValue and then their respective public keys. The one for
retrieving address's public keys is located in rpcwallet.cpp
Changes addwitnessaddress's output to be a JSON object with
two fields, address and redeemscript.
Adds a test to deprecated_rpc.py for testing the deprecation.
Update the tests to use addwitnessaddress or give only public keys
to createmultisig. Anything that used addwitnessaddress was also
updated to reflect the new API.
35c2b1f Fix rare failure in p2p-segwit.py (Suhas Daftuar)
Pull request description:
Avoid creating very small utxos that would violate an assumption in
test_non_standard_witness.
Fixes#11953
Tree-SHA512: 5fb7ae68f8731df819bab365923a84568b57227e4112f711fc2574767d15be83acd3e99d0d5bac94a42411a958b13a2119468babefed14efcfdda180004d4166
b224a47a1 Add address_types test (Pieter Wuille)
7ee54fd7c Support downgrading after recovered keypool witness keys (Pieter Wuille)
940a21932 SegWit wallet support (Pieter Wuille)
f37c64e47 Implicitly know about P2WPKH redeemscripts (Pieter Wuille)
57273f2b3 [test] Serialize CTransaction with witness by default (Pieter Wuille)
cf2c0b6f5 Support P2WPKH and P2SH-P2WPKH in dumpprivkey (Pieter Wuille)
37c03d3e0 Support P2WPKH addresses in create/addmultisig (Pieter Wuille)
3eaa003c8 Extend validateaddress information for P2SH-embedded witness (Pieter Wuille)
30a27dc5b Expose method to find key for a single-key destination (Pieter Wuille)
985c79552 Improve witness destination types and use them more (Pieter Wuille)
cbe197470 [refactor] GetAccount{PubKey,Address} -> GetAccountDestination (Pieter Wuille)
0c8ea6380 Abstract out IsSolvable from Witnessifier (Pieter Wuille)
Pull request description:
This implements a minimum viable implementation of SegWit wallet support, based on top of #11389, and includes part of the functionality from #11089.
Two new configuration options are added:
* `-addresstype`, with options `legacy`, `p2sh`, and `bech32`. It controls what kind of addresses are produced by `getnewaddress`, `getaccountaddress`, and `createmultisigaddress`.
* `-changetype`, with the same options, and by default equal to `-addresstype`, that controls what kind of change is used.
All wallet private and public keys can be used for any type of address. Support for address types dependent on different derivation paths will need a major overhaul of how our internal detection of outputs work. I expect that that will happen for a next major version.
The above also applies to imported keys, as having a distinction there but not for normal operations is a disaster for testing, and probably for comprehension of users. This has some ugly effects, like needing to associate the provided label to `importprivkey` with each style address for the corresponding key.
To deal with witness outputs requiring a corresponding redeemscript in wallet, three approaches are used:
* All SegWit addresses created through `getnewaddress` or multisig RPCs explicitly get their redeemscripts added to the wallet file. This means that downgrading after creating a witness address will work, as long as the wallet file is up to date.
* All SegWit keys in the wallet get an _implicit_ redeemscript added, without it being written to the file. This means recovery of an old backup will work, as long as you use new software.
* All keypool keys that are seen used in transactions explicitly get their redeemscripts added to the wallet files. This means that downgrading after recovering from a backup that includes a witness address will work.
These approaches correspond to solutions 3a, 1a, and 5a respectively from https://gist.github.com/sipa/125cfa1615946d0c3f3eec2ad7f250a2. As argued there, there is no full solution for dealing with the case where you both downgrade and restore a backup, so that's also not implemented.
`dumpwallet`, `importwallet`, `importmulti`, `signmessage` and `verifymessage` don't work with SegWit addresses yet. They're remaining TODOs, for this PR or a follow-up. Because of that, several tests unexpectedly run with `-addresstype=legacy` for now.
Tree-SHA512: d425dbe517c0422061ab8dacdc3a6ae47da071450932ed992c79559d922dff7b2574a31a8c94feccd3761c1dffb6422c50055e6dca8e3cf94a169bc95e39e959
This introduces two command line flags (-addresstype and -changetype) which control
the type of addresses/outputs created by the GUI and RPCs. Certain RPCs allow
overriding these (`getnewaddress` and `getrawchangeaddress`). Supported types
are "legacy" (P2PKH and P2SH-multisig), "p2sh-segwit" (P2SH-P2WPKH and P2SH-P2WSH-multisig),
and "bech32" (P2WPKH and P2WSH-multisig).
A few utility functions are added to the wallet to construct different address type
and to add the necessary entries to the wallet file to be compatible with earlier
versions (see `CWallet::LearnRelatedScripts`, `GetDestinationForKey`,
`GetAllDestinationsForKey`, `CWallet::AddAndGetDestinationForScript`).
test_framework accepts a new --usecli parameter. Running the test with
this parameter will cause all RPCs to be sent through bitcoin-cli rather
than directly over http. By default, individual test cases do not
support --usecli, and self.supports_cli must be set to True in the
set_test_params method.
We can make supports_cli default to True in future once we know which
tests will fail with use_cli.
Change TestNodeCLI.__call__() to return a new instance instead of modifying the
existing instance. This way, it's possible to create different cli objects that
have their own options (for example -rpcwallet options to connect to different
wallets), and options set for a single call (`node.cli(options).method(args)`)
will no longer leak into future calls.
aad3090 [rpc] Adding ::minRelayTxFee amount to getmempoolinfo and updating mempoolminfee help description (Jeff Rade)
Pull request description:
These are RPC document changes from #11475 which is now merged. Took into consideration comments from #11475 and #6941 for this PR.
Biggest change here is when calling `getmempoolinfo`, will now show the `minrelaytxfee` in the JSON reponse (see below):
```
$ bitcoin-cli getmempoolinfo
{
"size": 50,
"bytes": 13102,
"usage": 70480,
"maxmempool": 300000000,
"mempoolminfee": 0.00001000,
"minrelaytxfee": 0.00001000
}
```
Fixes#8953
Tree-SHA512: 5ca583961365ee1cfe6e0d19afb0b41d542e179efee3b3c5f3fcf7d3ebca9cc3eedfd1434a0da40c5eed84fba98b35646fda201e6e61c689b58bee9cbea44b9e
595a7ba Increment MIT Licence copyright header year on files modified in 2017 (Akira Takizawa)
Pull request description:
Edited via:
$ contrib/devtools/copyright_header.py update .
ps) It is the same commit as #9450
Tree-SHA512: 274bfcd6cf2914315ed52f6db773a68800ce9d6bd225a3142654483f0bbc3fd865009e62f9d954f65765d038c626e55d2a64e37e16843809adc2f67abe659b6d
fadf60e381 qa: Note on test order in test_runner (MarcoFalke)
Pull request description:
C.f. #11964
Tree-SHA512: 5f087965093722d9e7a3febddcc187e412bd0636a7ed2da60111668fe3bba6668110e25a38ddcccc0d0aae132611c56fa72f3f0c473fb3fb59e38be445edfcd5
656fde5 Add script birthtime metadata to dump and import wallet (MeshCollider)
1bab9b2 Add script dump note to RPC help text and release notes (MeshCollider)
68c1e00 Add test for importwallet (MeshCollider)
9e1184d Add dumpwallet scripts test (MeshCollider)
ef0c730 Add scripts to importwallet RPC (MeshCollider)
b702ae8 Add CScripts to dumpwallet RPC (MeshCollider)
cdc260a Add GetCScripts to CBasicKeyStore (MeshCollider)
Pull request description:
As discussed in https://github.com/bitcoin/bitcoin/pull/11289#issuecomment-334600457, adds the CScripts from the wallet to the `dumpwallet` RPC and then allows them to be imported with the `importwallet` RPC. Includes a basic test, and modifies the helptext of the dumpwallet RPC.
Notes:
- Reviewers: use `?w=1` to avoid the indentation-only change in commit `Add scripts to importwallet RPC `
- currently the scripts are followed with `# addr=` comments just as the other keys are, unsure if this might confuse users into thinking all the scripts are for valid P2SH addresses though, but I don't think that should be an issue.
- there are no birthtimes for scripts, so script imports don't affect rescans
- `importwallet` imports the CScripts but I'm not sure how to approach specifying whether scripts are for P2SH addresses, BIP173 addresses, etc. whether that matters or not. Otherwise the RPC helptext might just need modification.
Fixes#11715
Tree-SHA512: 36c55837b3a58b9d3499d4c0c2ae82153d62aa71919e751574651b63a1d2b8ecc83796db4553cc65dad9b5341c3a42ae2fcf4d62598c30af267f8e1461ba8272
aac6b3f067 Update files.md for new wallets/ subdirectory (MeshCollider)
b67342906c Cleanups for walletdir PR (MeshCollider)
Pull request description:
This addresses the remaining nits from https://github.com/bitcoin/bitcoin/pull/11466
- Updates `doc/files.md` with respect to the new default wallet directory
- Fixes @promag and @laanwj's error message nit, and Jonas' release notes nit
- ~Addresses @laanwj's net-specific wallet subdirectory concern in the case that a walletdir is specified~
- Changes the #includes from "" to <> style after #11651
Tree-SHA512: b86bf5fdc4de54c1b0f65b60a83af3cf82b35d216ce9c0de724803bfba6934796238b6c412659dcc29ae2e3e856d4eb97ae777c80f36f4089d8acecfddefe9aa
be9a13c Add configuration/argument testing (MeshCollider)
Pull request description:
Adds a new functional test for testing various command line and configuration file argument interactions, that aren't specific enough to other functionality to be placed in other tests.
Currently this tests the error messages for non-existent datadir, which would have caught the bug fixed in https://github.com/bitcoin/bitcoin/pull/11829. It also tests that command line arguments override the ones in the config file.
I plan on working on a fix for https://github.com/bitcoin/bitcoin/issues/11819 / https://github.com/bitcoin/bitcoin/issues/1044 and then expanding this test with cases for that.
Tree-SHA512: 97aea18c67d331db3ca3d0c99c79267cf012df67fddafc9fac63d392f5c3a6469aa14d93b5865c3bbe561461648d2485367978a77446483b8df53d1916f1c8e8
node_network_limited had a race condition, since wait_for_block()
doesn't do what you might expect. It only checks the most recent block
received over the P2P interface (perhaps we should rename the method
wait_for_most_recent_block() to avoid future confusion). The test can
fail if the node sends us invs for other blocks, we respond with a
getdata, and the node sends us one of those blocks in the 0.05 second
wait_until loop window.
Fix this by not responding to inv messages with getdata messages.
6f39ac0 Add test for decoderawtransaction bool (MeshCollider)
bbdbe80 Add iswitness parameter to decode- and fundrawtransaction RPCs (MeshCollider)
Pull request description:
Suggested in https://github.com/bitcoin/bitcoin/pull/10481#issuecomment-325244946, this adds the option to explicitly choose whether a serialized transaction should be decoded as a witness or non-witness transaction rather than relying on the heuristic checks in #10481. The parameter defaults to relying on #10481 if not included, but it overrides that if included.
Tree-SHA512: d4846a5bb7d64dc19c516445488b00af329fc1f4181d9dfdf9f2382a086568edc98250a4ac7594e24a1bc231dfdee53c699b12c8380c355b920a67cc6770b7a9
5c8ff26 [tests] Add NetworkThread assertions (John Newbery)
34e08b3 [tests] Fix network threading in functional tests (John Newbery)
74e64f2 [tests] Use network_thread_start() in tests. (John Newbery)
5fc6e71 [tests] Add network_thread_ utility functions. (John Newbery)
Pull request description:
Add assert that only one NetworkThread exists at any time in functional tests, and fix cases where that wasn't true.
fixes#11776
Tree-SHA512: fe5d1c59005f94bf66e11bb23ccf274b1cd9913741b56ea11dbcd21db4cc0b53b4413c0c4c16dbcd6ac611adad5e5cc2baaa39720598ce7b6393889945d06298
6697a70 add test for unconfirmed balance between restarts (Gregory Sanders)
6ba8f30 don't attempt mempool entry for wallet transactions on startup if already in mempool (Gregory Sanders)
Pull request description:
…eady in mempool
Mempool loads first, wallet second. Second attempt fails, marking that transaction !fInMempool. Those funds will disappear until confirmation is reached.
Tree-SHA512: 955f0565ec1dc1ba395e0b803a98c07b7cd00c8cac5ec618ed832fed259a856fb7bbbe41310cf6a4e43c0435e09b156109d2a4467d403811dc8379d2caebeede
assumevalid.py, example_test.py and p2p-acceptblocks.py add
p2p_connections after the NetworkThread has been started. This isn't
permitted. Fix test to restart the network thread when adding new
connections.
p2p-leaktest.py had a potential race condition if the NetworkThread
hadn't terminated by the time we tried to restart it.
Add network thread_start(), network_thread_running() and
network_thread_join() utility functions in mininode.py and use
network_thread_running() in network thread assertions.
de74c62 [Doc] Update bip.md, add support for BIP 159 (Jonas Schnelli)
e054d0e [QA] Add node_network_limited test (Jonas Schnelli)
bd09416 Avoid leaking the prune height through getdata (fingerprinting countermeasure) (Jonas Schnelli)
27df193 Always set NODE_NETWORK_LIMITED bit (Jonas Schnelli)
7caba38 Add NODE_NETWORK_LIMITED flags and min block amount constants (Jonas Schnelli)
Pull request description:
Extracted from #10387.
Does implement BIP159, but only the signalling part. No connections are made to NODE_NETWORK_LIMITED in this PR.
The address relay and connection work (the more complicated part) can then be separated (probably in #10387).
Tree-SHA512: e3218eb4789a9320b0f42dc10f62d30c13c49bdef00443fbe653bee22933477adcfc1cf8f6a95269324560b5721203ed41f3c5e2dd8a98ec2791f6a9d8346b1a
434526a [test] Add tests for getrawtransaction with block hash. (Karl-Johan Alm)
b167951 [rpc] Allow getrawtransaction to take optional blockhash to fetch transaction from a block directly. (Karl-Johan Alm)
a5f5a2c [rpc] Fix fVerbose parsing (remove excess if cases). (Karl-Johan Alm)
Pull request description:
[Reviewer hint: use [?w=1](https://github.com/bitcoin/bitcoin/pull/10275/files?w=1) to avoid seeing a bunch of indentation changes.]
Presuming a user knows the block hash of the block containing a given transaction, this PR allows them to fetch the raw transaction, even without `-txindex`. It also enables support for getting transactions that are in orphaned blocks.
Note that supplying a block hash will override mempool and txindex support in `GetTransaction`. The rationale behind this is that a transaction may be in multiple places (orphaned blocks) and if the user supplies an explicit block hash it should be adhered to.
```Bash
$ # a41.. is a tx inside an orphan block ..3c6f.. -- first try getting it normally
$ ./bitcoin-cli getrawtransaction a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79 1
error code: -5
error message:
No such mempool transaction. Use -txindex to enable blockchain transaction queries. Use gettransaction for wallet transactions.
$ # now try with block hash
$ ./bitcoin-cli getrawtransaction a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79 1 0000000000000000003c6fe479122bfa4a9187493937af1734e1e5cd9f198ec7
{
"hex": "01000000014e7e81144e42f6d65550e59b715d470c9301fd7ac189[...]90488ac00000000",
"inMainChain": false,
"txid": "a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79",
"hash": "a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79",
"size": 225,
[...]
}
$ # another tx 6c66... in block 462000
$ ./bitcoin-cli getrawtransaction 6c66b98191e9d6cc671f6817142152ebf6c5cab2ef008397b5a71ac13255a735 1 00000000000000000217f2c12922e321f6d4aa933ce88005a9a493c503054a40
{
"hex": "0200000004d157[...]88acaf0c0700",
"inMainChain": true,
"txid": "6c66b98191e9d6cc671f6817142152ebf6c5cab2ef008397b5a71ac13255a735",
"hash": "6c66b98191e9d6cc671f6817142152ebf6c5cab2ef008397b5a71ac13255a735",
"size": 666,
[...]
}
$
```
Tree-SHA512: 279be3818141edd3cc194a9ee65929331920afb30297ab2d6da07293a2d7311afee5c8b00c6457477d9f1f86e86786a9b56878ea3ee19fa2629b829d042d0cda
5a7c09a test: Add tests for `-debuglogfile` with subdirs (Anthony Towns)
4158734 doc: Update release notes for `-debuglogfile` (Wladimir J. van der Laan)
2323242 test: Add test for `-debuglogfile` (Wladimir J. van der Laan)
cf5f432 Add `-debuglogfile` option (Wladimir J. van der Laan)
Pull request description:
This patch adds an option to configure the name and/or directory of the debug log file.
The user can specify either a relative path, in which case the path is relative to the (network specific) data directory. They can also specify an absolute path to put the log anywhere else in the file system.
Alternative to #11741 that gets rid of the concept of a "log directory" by specifying the path for the specific kind of log, the debug log. Which happens to be the only kind of log we have at this point*, but a hypothetical new kind of log (say, an audit log) would get a new option. This has more flexibility than specifying a directory which has to contain all of them.
\* excluding `db.log` which is internally generated by the wallet database library, but that one moves along with `-walletdir`.
Tree-SHA512: 4434d0e598dc23504e5c9e67fdbaef56db4f0fd490f9f54fd503e69d4dda9b5b69c539e1794ed841e72161b7b1dc3374d2f1193dd431b057566750e56fd8f24b
873beca6d [tests] Rename NodeConn and NodeConnCB (John Newbery)
Pull request description:
Final step in #11518
NodeConn -> P2PConnection
NodeConnCB -> P2PInterface
This is basically just a rename. Should be an easy review.
Tree-SHA512: fe1204b2b3d8182c5e324ffa7cb4099a47ef8536380e0bb9d37a5fccf76a24f548d1f1a7988ab8f830986a3058b670696de3fc891af5e5f75dbeb4e3273005d7
ff8a9b0 [tests] Add combinedlogslen argument to test_runner.py (John Newbery)
dba94ea [tests] [travis-ci] Move Travis functional test log post processing to test_runner (John Newbery)
bba1c54 [tests] Improve logging shutdown and add hint for combine_logs (John Newbery)
Pull request description:
Replaces #11779 . Notes from that PR:
> Currently, when a functional test fails, the debug logs are printed sequentially to the travis log. This makes debugging race conditions based on the travis log hard. Instead, all logs events should be combined and sorted by their timestamp, then appended to the travis log.
@MarcoFalke
Tree-SHA512: 56c80067d6a2c92f7e6a35e3ae5160637a0de052d9da593c7be6e02233544a93c66d62456f903f85e2edc09e31ab4bdafd1aed1d9897ae48c634f82631f856f7
e9dfa9bcc [tests] Move version message sending from NodeConn to NodeConnCB (John Newbery)
dad596fc3 [tests] Make NodeConnCB a subclass of NodeConn (John Newbery)
e30d40438 [tests] Move only: move NodeConnCB below NodeConn (John Newbery)
4d5059856 [tests] Tidy up mininode (John Newbery)
f2ae6f32a [tests] Remove mininode periodic (half-hour) ping messages (John Newbery)
ec59523c5 [tests] Remove rpc property from TestNode in p2p-segwit.py. (John Newbery)
Pull request description:
This is the final step in #11518, except for possibly renaming - for motivation, please see that PR.
If this is merged, then migrating the test framework from asyncore to asyncio should be easier (I say should because I haven't dug too deeply into what would be required).
Requesting review from @ryanofsky , since he always has good feedback on these refactor PRs, and I'd appreciate his take on this refactor. Note particularly that I've reverted the change suggested here: https://github.com/bitcoin/bitcoin/pull/11182#discussion_r148859555 . The idea, as always, is to present a simple interface to the test writer.
Tree-SHA512: 94dd467a13ec799b101108cf47d4dccb6f6240b601e375e3d785313333bbb389c26072a50759aca663bbf3d6c8b867b99e36ae8800ab8ea115e0496c151926ce
Instead of calling combine_logs from test_runner when the environment variable
PYTHON_DEBUG is set, add a combinedlogslen argument. This makes it easier
to call when running locally, and allows a different length of combined logs
to be printed.
This commit moves the logic that sends a version message
on connection from NodeConn to NodeConnCB. NodeConn should
not be aware of the semantics or meaning of the P2P payloads.
This makes NodeConnCB a subclass of NodeConn, and
removes the need for the client code to know
anything about the implementation details of NodeConnCB.
NodeConn can now be swapped out for any other implementation
of a low-level connection without changing client code.
9d42cc333 [tests] address review comments (John Newbery)
f0c4ab9a7 [tests] fix flakiness in sendheaders.py (John Newbery)
25fd6e2c2 [tests] refactor check_last_announcement() in sendheaders.py (John Newbery)
f39d4bbd1 [tests] tidy up BaseNode in sendheaders.py (John Newbery)
2613c545f [tests] fix flake8 warnings in sendheaders.py (John Newbery)
Pull request description:
This PR should fix the intermittent failure of sendheaders.py described in #11673. The first three commits are tidying up and refactoring the file. The final commit _fix flakiness in sendheaders.py_ fixes the intermittent failures. The commit message for that commit describes the problems that are being fixed.
I think @laanwj @MeshCollider @MarcoFalke have seen these failures.
fixes#11673
Tree-SHA512: 278e1af85f2eae00f970f2d8ef33686dd52b4f62180dea4cfdaff7bcf3287c6f1c2930355d99461a12f0c51c4d42cc3b1cb3275174134028ca4d06ffc24c18dd
c1e5d40 Make debugging test crash easier (MeshCollider)
8263f6a Create walletdir if datadir doesn't exist and fix tests (MeshCollider)
9587a9c Default walletdir is wallets/ if it exists (MeshCollider)
d987889 Add release notes for -walletdir and wallets/ dir (MeshCollider)
80c5cbc Add test for -walletdir (MeshCollider)
0530ba0 Add -walletdir parameter to specify custom wallet dir (MeshCollider)
Pull request description:
Closes#11348
Adds a `-walletdir` parameter which specifies a directory to use for wallets, allowing them to be stored separately from the 'main' data directory. Creates a new `wallets/` directory in datadir if this is the first time running, and defaults to using it if it exists.
Includes tests and release notes. Things which might need to be considered more:
- there is no 'lock' on the wallets directory, which might be needed?
- because this uses a new wallets/ directory by default, downgrading to an earlier version won't see the wallets in that directory (not a big deal though, users can just copy them up to the main dir)
- jnewbery suggested putting each wallet in its own directory, which is a good idea, but out of scope for this PR IMO. EDIT: this is being done in https://github.com/bitcoin/bitcoin/pull/11687
- doc/files.md needs updating (will do soon)
I also considered including a cleanup by removing caching of data directory paths and instead just initialise them once on startup (c.f. #3073), but decided it wasn't super relevant here will just complicate review.
Tree-SHA512: c8ac04bfe9a810c32055f2c8b8fa0d535e56125ceb8d96f12447dd3538bf3e5ee992b60b1cd2173bf5f3fa023a9feab12c9963593bf27ed419df929bb413398d
Currently it's possible to accidentally type e.g.
bitcoin-cli -getinfo getbalance
and get an answer which can be confusing; the trialing arguments are
just ignored.
To avoid this, throw an error if the user provides arguments to
`-getinfo`.
1135c79 [tests] Tidy up mininode.py module (John Newbery)
f9cd9b1 [tests] Move test_framework Bitcoin primitives into separate module (John Newbery)
Pull request description:
Second part of #11518.
Moves the primitive Bitcoin datastructures and message classes into their own module, and tidies up the mininode.py module.
- First commit is almost entirely move-only
- Second commit is mostly move-only, but also does a little tidying.
Tree-SHA512: 5d74802677f1ab788e43188653106a96fffd9ab1fe3aa6a4eb94e5807de5dd5c8ee212296f45e8d16c7e3d95cfc4891677e812b7944bd3ab604e04b3b88aa06e
Fixes to sources of intermittent failure in sendheaders.py
- at the start of test_null_locators(), a new block is generated and
then a getheaders is sent. check_last_accouncement() is called to assert
that the headers message is received. However, the new block triggers an
inv to be sent over both P2P connections, so there's a race. If the inv
is received at the wrong time, the test fails.
- test_null_locators() ends by sending a block to the node under test.
At the start of test_nonnull_locators(), a block is mined and
check_last_announcement() is called to assert that the inv received is
for the same block. That means there's a race: if the inv from the block
sent in test_null_locators() is received at the wrong time, the test
fails.
All calls of check_last_announcement() asserted that the return
value was True. Just assert inside the function instead. This
gives better debug information if the assert fails.
Also only check the contents of the most recent inv and header if
check_last_announcement() is called with the relevant argument.
28f8b66 Diagnose unsuitable outputs in lockunspent(). (Eelis)
Pull request description:
Fixes#2667.
This is a simplified version of pull request #3574, which was abandoned by its author.
I added some tests as well.
Tree-SHA512: e63e00dec8b1b232079380183805cb0b0b18c78ea6bea769837949aab984689d7f68b2ccfe66b1873517b040b9e616ce0eb058575c3d4382aa8c26eebcf1f14e
fafdad0d4 qa: Remove unused NodeConn members (MarcoFalke)
Pull request description:
* `ver_send` and `ver_recv` were completely unused
* `rpc` was only used once, in p2p-segwit. Imo better only pass it to the constructor in that single test
Tree-SHA512: 7f85554d6d0fd2096516ca3c608811d5370da66cde35d8031bdc921607a7a4efdb26355896012f75f713f8df09e28d46ba46be69fd96a5898fabb1a25cbcb8ad
faaa7db qa: Only allow disconnecting all NodeConns (MarcoFalke)
Pull request description:
Disconnecting the connection with `index=0` makes no sense when there are more than one connections, as the list "rotates around" and populates index 0 after `del`.
Just disconnect all NodeConns in any case.
Tree-SHA512: e5cf540823fccb31634b5a11501f54222be89862e80ccafc28bc06726480f8d2153b8c1b6f859fa6a6d087876251d48a6c6035bccdaaf16831e300bc17ff613d
5e0ba8f8c [wallet] getreceivedbyaddress should return error if address is not mine (John Newbery)
ea0cd24f7 [tests] Tidy up receivedby.py (John Newbery)
Pull request description:
Two commits:
- First commit tidies up the `receivedby.py` test (and speeds it up by factor of two)
- Second commit changes getreceivedbyaddress to return error if the address is not found in wallet, and adds test to `receivedby.py`
Tree-SHA512: e41342dcbd037a6b440cbe4ecd3b8ed589e18e477333f0d866f3564e948e0f5231e497d5ffb66da4e6680eb772d9f0cf839125098bb68b92d04a5ee35c6c0a81
11413646b [trivial] (whitespace only) fix getblockchaininfo alignment (John Newbery)
bd9c18171 [rpc] Add initialblockdownload to getblockchaininfo (John Newbery)
Pull request description:
Exposing whether the node is in IBD would help for testing, and may be useful in general, particularly for developers.
First discussed in #10357 here: https://github.com/bitcoin/bitcoin/pull/10357#pullrequestreview-59963870
> ... we could simplify this (and possibly other) tests by just adding a way to know if a node is in IBD. I'd like to do that, but I'm not sure it makes sense to complicate this PR with discussion over how that information should be made available. Eg it's not clear to me that the notion of being in IBD is worth exposing to the casual user, versus a hidden rpc call or something, since the definition has changed over time, and may continue to change in the future. But I still do agree that at least for testing purposes it would be far simpler to expose the field somehow...
This PR currently implements the simplest way of doing this: adding an `initialblockdownload` field to `getblockchaininfo`. Other approaches we could take:
1. add a new debug RPC method that exposes `IBD` and potentially other information.
2. add a parameter to `getblockchaininfo`, eg `debug_info`, which would cause it to return debug information including IBD
3. add a query string to the url `?debug=true` which would cause RPCs to return additional debug information.
I quite like the idea of (3). Feedback on these and other approaches very much welcomed!
@sdaftuar @laanwj
Tree-SHA512: a6dedd47f8c9bd38769cc597524466250041136feb33500644b9c48d0ffe4e3eeeb2587b5bbc6420364ebdd2667df807fbb50416f9a7913bbf11a14ea86dc0d4
- Fix flake8 warnings
- Remove the useless get_sub_array_from_array() function
- Reduce runtime for receivedby.py by about half by only using two nodes
748157913 [tests] Make comp test framework more debuggable (John Newbery)
Pull request description:
We should remove the comparison test framework entirely (see #10603).
Until we do that, let's make it a bit more debuggable. Currently, if there's an assert in the framework, it's very difficult to track down where we are in the test generator. Make the logging a bit better to help with debugging.
Before this PR:
```
→ ./p2p-fullblocktest.py
2017-10-09 14:05:11.302000 TestFramework (INFO): Initializing test directory /tmp/user/1000/testzdnax_yr
2017-10-09 14:05:11.557000 TestFramework.mininode (INFO): Connecting to Bitcoin Node: 127.0.0.1:11975
2017-10-09 14:05:11.712000 TestFramework.comptool (INFO): Test 1: PASS
2017-10-09 14:05:11.947000 TestFramework.comptool (INFO): Test 2: PASS
2017-10-09 14:05:12.057000 TestFramework.comptool (INFO): Test 3: PASS
2017-10-09 14:05:12.058000 TestFramework (ERROR): Assertion failed
Traceback (most recent call last):
File "/home/ubuntu/bitcoin/test/functional/test_framework/test_framework.py", line 117, in main
self.run_test()
File "./p2p-fullblocktest.py", line 72, in run_test
self.test.run()
File "/home/ubuntu/bitcoin/test/functional/test_framework/comptool.py", line 306, in run
assert test_number != 4
AssertionError
2017-10-09 14:05:12.059000 TestFramework (INFO): Stopping nodes
2017-10-09 14:05:14.203000 TestFramework (WARNING): Not cleaning up dir /tmp/user/1000/testzdnax_yr
2017-10-09 14:05:14.204000 TestFramework (ERROR): Test failed. Test logging available at /tmp/user/1000/testzdnax_yr/test_framework.log
```
With this PR:
```
→ ./p2p-fullblocktest.py
2017-10-09 14:03:54.069000 TestFramework (INFO): Initializing test directory /tmp/user/1000/testuey7t3tf
2017-10-09 14:03:54.329000 TestFramework.mininode (INFO): Connecting to Bitcoin Node: 127.0.0.1:11783
2017-10-09 14:03:54.383000 TestFramework.comptool (INFO): Running test 1: ./p2p-fullblocktest.py line 184
2017-10-09 14:03:54.496000 TestFramework.comptool (INFO): Running test 2: ./p2p-fullblocktest.py line 193
2017-10-09 14:03:54.758000 TestFramework.comptool (INFO): Running test 3: ./p2p-fullblocktest.py line 205
2017-10-09 14:03:54.867000 TestFramework.comptool (INFO): Running test 4: ./p2p-fullblocktest.py line 208
2017-10-09 14:03:54.867000 TestFramework (ERROR): Assertion failed
Traceback (most recent call last):
File "/home/ubuntu/bitcoin/test/functional/test_framework/test_framework.py", line 117, in main
self.run_test()
File "./p2p-fullblocktest.py", line 72, in run_test
self.test.run()
File "/home/ubuntu/bitcoin/test/functional/test_framework/comptool.py", line 309, in run
assert test_number != 4
AssertionError
2017-10-09 14:03:54.868000 TestFramework (INFO): Stopping nodes
2017-10-09 14:03:56.950000 TestFramework (WARNING): Not cleaning up dir /tmp/user/1000/testuey7t3tf
2017-10-09 14:03:56.950000 TestFramework (ERROR): Test failed. Test logging available at /tmp/user/1000/testuey7t3tf/test_framework.log
```
Tree-SHA512: 5525958b0098d661c281bd955c92c72bf81359464376e96d44e6c88f18aea57ba08270ecd564edda4b47d674e3b27d20e5b1060544bf8dd5c6a68103d2bb35b8
725b79a [test] Verify node doesn't send headers that haven't been fully validated (Russell Yanofsky)
3788a84 Do not send (potentially) invalid headers in response to getheaders (Matt Corallo)
Pull request description:
Nowhere else in the protocol do we send headers which are for
blocks we have not fully validated except in response to getheaders
messages with a null locator. On my public node I have not seen any
such request (whether for an invalid block or not) in at least two
years of debug.log output, indicating that this should have minimal
impact.
Tree-SHA512: c1f6e0cdcdfb78ea577d555f9b3ceb1b4b60eff4f6cf313bfd8b576c9562d797bea73abc23f7011f249ae36dd539c715f3d20487ac03ace60e84e1b77c0c1e1a
fb00c45c3 [tests] Explicitly disallow support for p2p versions below 60001 (John Newbery)
3858aabbd [tests] Remove support for p2p alert messages (John Newbery)
c0b127470 [tests] Remove support for bre-BIP31 ping messages (John Newbery)
2904e301c [tests] Remove dead code from mininode.py (John Newbery)
Pull request description:
This is the first part of #11518. It removes a ~150 lines of unused code from the mininode module:
- remove unused `deliver_sleep_time` and `EarlyDisconnectError` code
- remove support for pre-BIP31 ping messages
- remove support for alert message
- explicitly don't support p2p versions lower than 60001
Should be an easy ACK for reviewers. If all extended tests pass, then this code really was dead :)
Tree-SHA512: 508e612ceb0b094250d18e75522d51e6b14cd069443050ba4af34d6f890c58721cb5653e8bc000b60635b9474d035b0dcd9c509c0dcdb3a7501df17b787f83b0
bc9c0a7 Improve wallet-accounts test (Russell Yanofsky)
Pull request description:
Add comments and
- Verify sending to a account causes getaccountaddress to generate new addresses.
- Verify sending to a account causes getreceivedbyaccount to return amount received.
- Verify ways setaccount updates the accounts of existing addresses.
Tree-SHA512: 4facc8d10fb23847081e8081839d4050faa855cca40f34012b82297bf1a8cfdb975b26314bc518dc6b3f5997452a7acf309f9627e0dff359347c628b37014bfa
The mininode module includes code to support p2p versions below
60001. However, the test_framework does not support versions
of Bitcoin Core before V0.13.0. Remove code supporting
p2p versions before 60001 (which has never been run).
BIP31 support was added to Bitcoin Core in version 0.6.1. Our test
framework is incompatible with Bitcoin Core versions that old, so remove
all special logic for handling pre-BIP31 pings.
p2p connections can now be added to TestNode instances.
This commit also updates the example test to use the new
p2p interface in TestNode to demonstrate usage.
A future commit will update the existing tests to use p2p through the
TestNode.
d61845818 Have SegWit active by default (Pieter Wuille)
4bd89210a Unit tests for always-active versionbits. (Anthony Towns)
d07ee77ab Always-active versionbits support (Pieter Wuille)
18e071841 [consensus] Pin P2SH activation to block 173805 on mainnet (John Newbery)
526023aa7 Improve handling of BIP9Deployment limits (Anthony Towns)
Pull request description:
Most tests shouldn't have to deal with the now-historical SegWit activation transition (and other deployments, but SegWit is certainly the hardest one to accomodate).
This PR makes a versionbits starttime of -1 equal to "always active", and enables it by default for SegWit on regtest. Individual tests can override this by using the existing `-vbparams` option.
A few unit tests and functional tests are adapted to indeed override vbparams, as they specifically test the transition.
This is in preparation for wallet SegWit support, but I thought having earlier eyes on it would be useful.
Tree-SHA512: 3f07a7b41cf46476e6c7a5c43244e68c9f41d223482cedaa4c02a3a7b7cd0e90cbd06b84a1f3704620559636a2268f5767d4c52d09c1b354945737046f618fe5
5d465e396 Ensure backupwallet fails when attempting to backup to source file (Tomas van der Wansem)
Pull request description:
Previous behaviour was to destroy the wallet (to zero-length)
This fixes#11375
Tree-SHA512: bfd1738659b15e3f23b6bbdf55ec12269c62c820bf701daec19500b52bd5845bb5516733c6f76f36197eb155182a8a35dc239ad4de2ef1e59bbb0f124a455759
f3d4adf Make p2p-acceptablock not an extended test (Matt Corallo)
00dcda6 [qa] test that invalid blocks on an invalid chain get a disconnect (Matt Corallo)
015a525 Reject headers building on invalid chains by tracking invalidity (Matt Corallo)
932f118 Accept unrequested blocks with work equal to our tip (Matt Corallo)
3d9c70c Stop always storing blocks from whitelisted peers (Matt Corallo)
3b4ac43 Rewrite p2p-acceptblock in preparation for slight behavior changes (Matt Corallo)
Pull request description:
@sdaftuar pointed out that the version in #11487 was somewhat DoS-able as someone could feed you a valid chain that forked off the the last checkpoint block and force you to do lots of work just walking backwards across blocks for each new block they gave you. We came up with a few proposals but settled on the one implemented here as likely the simplest without obvious DoS issues. It uses our existing on-load mapBlockIndex walk to make sure everything that descends from an invalid block is marked as such, and then simply caches blocks which we attempted to connect but which were found to be invalid. To avoid DoS issues during IBD, this will need to depend on #11458.
Includes tests from #11487.
Tree-SHA512: 46aff8332908e122dae72ceb5fe8cd241902c2281a87f58a5fb486bf69d46458d84a096fdcb5f3e8e07fbcf7466232b10c429f4d67855425f11b38ac0bf612e1
659b206 Make listsinceblock refuse unknown block hash (Russell Yanofsky)
Pull request description:
Change suggested by @theuni who noticed listsinceblock would ignore invalid block hashes causing it to return a completely unfiltered list of transactions.
Tree-SHA512: 3c8fb160265780d1334e856e853ab48e2e18372b8f1fc71ae480c3f45317048cc1fee0055d5c58031981a91b9c2bdbeb8e49a889d04ecba61729ce8109f2ce3f
This is a simple change that makes our accept requirements the
same as our request requirements, (ever so slightly) further
decoupling our consensus logic from our FindNextBlocksToDownload
logic in net_processing.
Removes checking whitelisted behavior (which will be removed, the
difference in behavior here makes little sense) and no longer
requires that blocks at the same work as our tip be dropped if not
requested (in part because we *do* request those blocks).
e065249 Add unit test for outbound peer eviction (Suhas Daftuar)
5a6d00c Permit disconnection of outbound peers on bad/slow chains (Suhas Daftuar)
c60fd71 Disconnecting from bad outbound peers in IBD (Suhas Daftuar)
Pull request description:
The first commit will disconnect an outbound peer that serves us a headers chain with insufficient work while we're in IBD.
The second commit introduces a way to disconnect outbound peers whose chains fall out of sync with ours:
For a given outbound peer, we check whether their best known block (which is known from the blocks they announce to us) has at least as much work as our tip. If it doesn't, we set a 20 minute timeout, and if we still haven't heard about a block with as much work as our tip had when we set the timeout, then we send a single getheaders message, and wait 2 more minutes. If after two minutes their best known block has insufficient work, we disconnect that peer.
We protect 4 of our outbound peers (who provide some "good" headers chains, ie a chain with at least as much work as our tip at some point) from being subject to this logic, to prevent excessive network topology changes as a result of this algorithm, while still ensuring that we have a reasonable number of nodes not known to be on bogus chains.
We also don't require our peers to be on the same chain as us, to prevent accidental partitioning of the network in the event of a chain split. Note that if our peers are ever on a more work chain than our tip, then we will download and validate it, and then either reorg to it, or learn of a consensus incompatibility with that peer and disconnect. This PR is designed to protect against peers that are on a less work chain which we may never try to download and validate.
Tree-SHA512: 2e0169a1dd8a7fb95980573ac4a201924bffdd724c19afcab5efcef076fdbe1f2cec7dc5f5d7e0a6327216f56d3828884f73642e00c8534b56ec2bb4c854a656
Change suggested by Cory Fields <cory-nospam-@coryfields.com> who noticed
listsinceblock would ignore invalid block hashes causing it to return a
completely unfiltered list of transactions.
Add comments and
- Verify sending to a account causes getaccountaddress to generate new addresses.
- Verify sending to a account causes getreceivedbyaccount to return amount received.
- Verify ways setaccount updates the accounts of existing addresses.
6d51eaefe qa: Fix race condition in sendheaders.py (Suhas Daftuar)
c96b2e4f0 qa: Fix replace-by-fee race condition failures (Suhas Daftuar)
Pull request description:
I think #11407 broke replace-by-fee by introducing a race condition. I was observing frequent failures of replace-by-fee locally, always with a mempool sync failure (the sync call was added in #11407).
It appeared to me like there were two causes: sometimes the node would be in IBD and not request the transaction that was relayed; other times the blocks generated in make_utxo wouldn't have relayed quickly enough for the spend of the transaction to be accepted. I believe I've fixed both potential errors.
ping @instagibbs
Edit: I found a race condition in the sendheaders.py test, where if the verack from the python node wasn't processed before the first block in the test was generated, then no block announcement would go out to that peer, breaking the test. Fixed by adding a sync_with_ping after waiting for verack.
Tree-SHA512: 6ad160966e432c151c1ce6e88ae67e60e47123523bda3755cf7697a00e1a5ba38de8561751826e3d7cf0e492f8c2aec298e1b4de8424ebbaf497f099a1ef1d07
Make sure wallet databases have unique fileids. If they don't, throw an error.
BDB caches do not work properly when more than one open database has the same
fileid, because values written to one database may show up in reads to other
databases.
Bitcoin will never create different databases with the same fileid, but users
can create them by manually copying database files.
BDB caching bug was reported by Chris Moore <dooglus@gmail.com>
https://github.com/bitcoin/bitcoin/issues/11429Fixes#11429
cc9ee80 Improve ZMQ functional test (João Barbosa)
Pull request description:
After #11439, this PR only improves:
- test comments;
- simplicity by removing *duplicate* tests;
- also removes duplicate code.
Tree-SHA512: 3636fa9694c827128128742ad31e635d19670c3645aef8e7b1cb46069c21631e8b0db059486a6f6e7eee237a23d93bce6df95190394b5a8dcfce31a49a72d17f
fafa003 qa: Remove never used return value of sync_with_ping (MarcoFalke)
fa9de37 qa: Make tmpdir option an absolute path (MarcoFalke)
Pull request description:
This should fix issues with the multiwallet test and its symlinks
when the tmpdir is a relative path.
Rather than fixing os.symlink to work with paths relative to a
directory descriptor, which does not work on Windows, normalize
the path instead.
Tree-SHA512: 189690f3d065ea2f0f48e06775c86d513d0916c7c86312432e8e16df160e65539e288c2bd53d49a4180735fa940f6fcd52b506ccd7d9815651a9b1a69850dda6
c5dfa90 [tests] Add uacomment tests (Cristian Mircea Messel)
Pull request description:
Checks for setting the value, max length and reserved characters
Tree-SHA512: a62e2cf8e455a3cd3987c0855f7bfc49de47504c01263e3573366e3cbff400c5678224773d4f1e4ac684fff34d987994e490a0978c4da05ff2a4bfa972c84723
7a91ceb5e [QA] Add RPC based rescan test (Jonas Schnelli)
c77170fbd [Wallet] add rescanblockchain <start_height> <stop_height> RPC command (Jonas Schnelli)
Pull request description:
A RPC rescan command is much more flexible for the following reasons:
* You can define the start and end-height
* It can be called during runtime
* It can work in multiwallet environment
Tree-SHA512: df67177bad6ad1d08e5a621f095564524fa3eb87204c2048ef7265e77013e4b1b29f991708f807002329a507a254f35e79a4ed28a2d18d4b3da7a75d57ce0ea5
This should fix issues with the multiwallet test and symlinks
when the tmpdir is a relative path.
Rather than fixing os.symlink to work with paths relative to a
directory descriptor, which does not work on Windows, normalize
the path instead.
4526d21 Add test for multiwallet batch RPC calls (Russell Yanofsky)
74182f2 Add missing batch rpc calls to python coverage logs (Russell Yanofsky)
505530c Add missing multiwallet rpc calls to python coverage logs (Russell Yanofsky)
9f67646 Make AuthServiceProxy._batch method usable (Russell Yanofsky)
e02007a Limit AuthServiceProxyWrapper.__getattr__ wrapping (Russell Yanofsky)
edafc71 Fix uninitialized URI in batch RPC requests (Russell Yanofsky)
Pull request description:
This fixes "Wallet file not specified" errors when making batch wallet RPC calls with more than one wallet loaded. This issue was reported by @NicolasDorier in https://github.com/bitcoin/bitcoin/issues/11257
Request URI is not used for anything except multiwallet request dispatching, so this change has no other effect.
Tree-SHA512: b3907af48a6323f864bb045ee2fa56b604188b835025ef82ba3d81673244c04228d796323cec208a676e7cd578a95ec7c7ba1e84d0158b93844d5dda8f6589b9
857b32b [tests] Add -walletnotify functional test (João Barbosa)
df18d29 [tests] Add -blocknotify functional test (João Barbosa)
9c72a46 [tests] Tidy up forknotify.py (John Newbery)
Pull request description:
This patch adds the missing functional tests for `-blocknotify` and `-walletnotify` notifications. The `-alertnotify` test file `forknotify.py` is renamed to `notifications.py` to accommodate the new tests. Credits to @jnewbery for this cleanup and unification.
Tree-SHA512: ee7b28b9f1bd225587efaefa6427c6d080ccb50ead390b23d94717c137a317183b37be00da0b2bffedd4192a363c971dea510d78d29278eb9fa76374f7855c09
eff4bd8 [test] P2P functional test for certain fingerprinting protections (Jim Posen)
a2be3b6 [net] Ignore getheaders requests for very old side blocks (Jim Posen)
Pull request description:
Sending a getheaders message with an empty locator and a stop hash is a request for a single header by hash. The node will respond with headers for blocks not in the main chain as well as those in the main chain. To avoid fingerprinting, the node should, however, ignore requests for headers on side branches that are too old. This replicates the logic that currently exists for `getdata` requests for blocks.
Tree-SHA512: e04ef61e2b73945be6ec5977b3c5680b6dc3667246f8bfb67afae1ecaba900c0b49b18bbbb74869f7a37ef70b6ed99e78ebe0ea0a1569369fad9e447d720ffc4
47ba8cf71 scripted-diff: rename assert_raises_jsonrpc to assert_raises_rpc error (John Newbery)
677d893ff [tests] do not allow assert_raises_message to be called with JSONRPCException (John Newbery)
5864e9c16 [tests] remove direct testing on JSONRPCException from individual test cases (John Newbery)
Pull request description:
I did this a few months ago (here: #9707), but a few new examples have crept back in.
When testing RPC failures, the test case should always assert the error value and message, to ensure that the failure was for the correct reason. Not doing that can hide bugs in the test code and mean that the test is not testing the correct behaviour.
RPC failure testing should use the utility function `assert_raises_jsonrpc()` (renamed in the final commit of this PR to `assert_raises_rpc_error()`.
This PR does the following:
- changes all remaining instances of tests directly testing on `JSONRPCException` to calls to `assert_raises_jsonrpc()`
- prevents `assert_raises_message()` from being called with `JSONRPCException`
- scripted-diff changes `assert_raises_jsonrpc()` to `assert_raises_rpc_error()`
Tree-SHA512: 2cc5e320704ec623a6e5a27d3c2c81cea86b502e29896f03bb5bf92cc36725132c1144410aecdf49e90d4577d512ee467d50d8184e9d5c5d0870bfc931316a5a
aa57590d7 Update importprivkey named args documentation (Dusty Williams)
Pull request description:
Addresses issue #11462 by updating the documentation for the importprivkey arguments to the correct names, and updates the functional test importprunedfunds.py to use named arguments when calling importprivkey.
Tree-SHA512: 64e14bf89c8c6eec9c37f6ec0c9fc0012fdb035d9ec32cd652110c75abaa922ec5c7523d6ec5098c8a7b42124159b5e330e070974eb79b8b92816f8d61074523
Fixes#11462. Updated documentation for importprivkey function to use the correct name for the first argument.
Also updates a call to importprivkey to use named args in functional test.
0cd9273 rpc: Prevent `dumpwallet` from overwriting files (Wladimir J. van der Laan)
Pull request description:
Prevent arbitrary files from being overwritten by `dumpwallet`. There have been reports that users have overwritten wallet files this way. It may also avoid other security issues.
Fixes#9934. Adds mention to release notes and adds a test.
Tree-SHA512: 268c98636d40924d793b55a685a0b419bafd834ad369edaec08227ebe26ed4470ddea73008d1c4beb10ea445db1b0bb8e3546ba8fc2d1a411ebd4a0de8ce9120
Split off AuthServiceProxy.get_request method to make it easier to batch RPC
requests without duplicating code and remove leading underscore from _batch
method.
This does not change any existing behavior.
Change AuthServiceProxyWrapper.__getattr__ to only wrap proxied attributes, not
real attributes. This way AuthServiceProxyWrapper can continue logging RPC
calls without complicating other object usages, and special case handling for
the .url property can be dropped.
1088b5322 add functional test for mempoolreplacement command line arg (Gregory Sanders)
Pull request description:
Currently untested.
Tree-SHA512: 2dd9d55a3499844e48b3774df9155fd650220b0761da45d16869570356bb0ed17a88d4efa4302a517dd96e1e9cb34113661b3c9df688736f6849201a3d544deb
07704c1 Add some tests for getchaintxstats (Akio Nakamura)
3336676 Fix getchaintxstats() (Akio Nakamura)
Pull request description:
1. calculate nblocks more adaptive.
-> set default nblocks to min (blocks for 1 month, target block's height - 1)
-> before PR: if not specify nblocks-parameter, illegal parameter error will happen when target block height is below nblocks.
2. correct error message.
-> nblocks accepts [1 .. block's height -1] . so add a word "-1".
3. add check 0-divide.
-> if nTimeDiff = 0 then use UniValue(UniValue::VNULL) and returns {... "txrate": null} .
-> before PR: if nTimeDiff = 0 then returns {... "txrate":} and bitcoin-cli cannot handle the response.
Tree-SHA512: e1962ce7bb05a5bc7dec03eb04a8e7578f50fdb68927fcfc0a2232905ef4d679293eee148ebe0866682d209a8c458d21fbe71715e7311adb81f37089aae1ed93
49f869f Fix bip68-sequence rpc test (Johnson Lau)
Pull request description:
The test mined 1 extra block for the ACTIVE state. Test added to catch the right moment of LOCKED_IN->ACTIVE transaction
Tree-SHA512: a42477cf0b137e7e3b7c6c7b2530101cfad4e4f59866170b8fc0d655c43b3144aad6bca4287a4a8df4c28d7cf08d3f8df166975ad2e8dcb7d2cc15de60cf11cd
f97ab35fa qa: Fix bug introduced in p2p-segwit.py (Suhas Daftuar)
a7820422e qa: Treat mininode p2p exceptions as fatal (Suhas Daftuar)
Pull request description:
#11121 inadvertently broke the constructor for the `TestNode()` object in `p2p-segwit.py`, silently breaking at least one of the tests.
Although the python code was raising exceptions due to a `TestNode()` object not existing (or having the right type), mininode was masking these from anyone running the test through the test_runner (like travis), because it catches all exceptions during message delivery and just prints a log message and continues. Such "graceful" handling of errors is almost certainly something we don't want in our test suite, so the first commit here attempts to prevent that type of failure from ever being masked.
The second commit fixes the particular bug in `p2p-segwit.py`.
Tree-SHA512: b6646e3cb1e05c35c28e8899c44104bf2e2d0384643ca87042ab7f6ec0960d89f5bf25a7b95bab6e32d401c20a6018226160500f6ddceb923e81ffb04adb4f2f
8213838 [Qt] tolerate BIP173/bech32 addresses during input validation (Jonas Schnelli)
06eaca6 [RPC] Wallet: test importing of native witness scripts (NicolasDorier)
fd0041a Use BIP173 addresses in segwit.py test (Pieter Wuille)
e278f12 Support BIP173 in addwitnessaddress (Pieter Wuille)
c091b99 Implement BIP173 addresses and tests (Pieter Wuille)
bd355b8 Add regtest testing to base58_tests (Pieter Wuille)
6565c55 Convert base58_tests from type/payload to scriptPubKey comparison (Pieter Wuille)
8fd2267 Import Bech32 C++ reference code & tests (Pieter Wuille)
1e46ebd Implement {Encode,Decode}Destination without CBitcoinAddress (Pieter Wuille)
Pull request description:
Builds on top of #11117.
This adds support for:
* Creating BIP173 addresses for testing (through `addwitnessaddress`, though by default it still produces P2SH versions)
* Sending to BIP173 addresses (including non-v0 ones)
* Analysing BIP173 addresses (through `validateaddress`)
It includes a reformatted version of the [C++ Bech32 reference code](https://github.com/sipa/bech32/tree/master/ref/c%2B%2B) and an independent implementation of the address encoding/decoding logic (integrated with CTxDestination). All BIP173 test vectors are included.
Not included (and intended for other PRs):
* Full wallet support for SegWit (which would include automatically adding witness scripts to the wallet during automatic keypool topup, SegWit change outputs, ...) [see #11403]
* Splitting base58.cpp and tests/base58_tests.cpp up into base58-specific code, and "address encoding"-code [see #11372]
* Error locating in UI for BIP173 addresses.
Tree-SHA512: 238031185fd07f3ac873c586043970cc2db91bf7735c3c168cb33a3db39a7bda81d4891b649685bb17ef90dc63af0328e7705d8cd3e8dafd6c4d3c08fb230341
395cef7 Change getmininginfo errors field to warnings (Andrew Chow)
8502b20 Unify help text for GetWarnings output in get*info RPCs (Andrew Chow)
f77f0e4 Add warnings field to getblockchaininfo (Andrew Chow)
Pull request description:
The `getblockchaininfo` output does not contain the `errors` field which the `getinfo`, `getmininginfo`, and `getnetworkinfo` RPCs have. It should have it as the errors pertain to the blockchain. This PR adds that field.
This PR also unifies the help text for the `errors` field and its output position so that all of the `get*info` commands are consistent.
`getnetworkinfo`'s `errors` field is named `warnings`. I did not change this even though it is inconsistent since this naming has been in use for a long time.
Tree-SHA512: 385ab6acfee67fc8816f4d51ab2bd7a623264c7973906dfbab0a171f199e9db16fde19093a5bc3dfbdd4ff5f19d2186b646eb6b3bae0a4d7c9add43650a4a9d9
5e69a43 Add test for bitcoin-cli -getinfo (John Newbery)
3826253 rpc: Handle `getinfo` locally in bitcoin-cli w/ `-getinfo` (Wladimir J. van der Laan)
Pull request description:
Since @laanwj doesn't want to maintain these changes anymore, I will.
This PR is a revival of #8843. I have addressed @jnewbery's comments.
Regarding atomicity, I don't think that is a concern here. This is explicitly a new API and those who use it will know that this is different and that it is not atomic.
Tree-SHA512: 9664ed13a5557bda8c43f34d6527669a641f260b7830e592409b28c845258fc7e0fdd85dd42bfa88c103fea3ecdfede5f81e3d91870e2accba81c6d6de6b21ff
Changes the errors field to warnings. To maintain compatibility,
the errors field is deprecated and enabled by starting bitcoind with
-deprecatedrpc=getmininginfo
048e0c3e2 [rpc] [tests] Add deprecated RPC test (Cristian Mircea Messel)
d4cdbd6fb [rpc] Deprecate estimatefee RPC (John Newbery)
Pull request description:
Deprecates estimatefee in v0.16, for final removal in v0.17.
This commit introduces a phased removal of RPC methods. RPC method is
disabled by default in version x, but can be enabled by using the
`-deprecatedrpc=<methodname>` argument. RPC method is removed entirely in version
(x+1).
This gives users fair warning that an RPC is to be removed, and time to change client software if necessary. Deprecation warnings in RPC return values or release notes are easily ignored.
This is a more generic version of the approach I tried to use in #10841, which too late to make it into v0.15.
Tree-SHA512: 9695a600e84b812974387333e4a6805d18972da30befb754e9e4da77cd9815d00c5cc2ee0b0350bdbbdb5fdc6ba47789f8b2c6f5b15c8cd5a1deefcc4832da30
Deprecate estimatefee in v0.16, for final removal in v0.17.
This commit introduces a phased removal of RPC methods. RPC method is
disabled by default in version x, but can be enabled by using the
`-deprecatedrpc=<method>` argument. RPC method is removed entirely in
version (x+1).
Prevent arbitrary files from being overwritten. There have been reports
that users have overwritten wallet files this way. It may also avoid
other security issues.
Fixes#9934. Adds mention to release notes and adds a test.
fadf31e wallet: Display non-HD error on first run (MarcoFalke)
Pull request description:
On current master a fresh wallet created with `-usehd=0` is silently created as HD wallet.
An error should be displayed on the first run.
Also, this restores a test that was removed in c22a53cFixes: #11313
Tree-SHA512: 226a4129984324f88a431c7e2726383f6841711f0227d8e9f5b4f89d4bb9f2b8e922e6cf0a6f91d6efa747d139543a236b9f29326fc5d1e5d6f1dea2465d9b85
1817398b3 mininode: add an optimistic write and disable nagle (Cory Fields)
Pull request description:
Disclaimer: I'm not familiar with asyncore, so I'm unclear how safe this is. It works for me (tm).
Because the poll/select loop may pause for 100msec before actually doing a send, and we have no way to force the loop awake, try sending from the calling thread if the queue is empty.
Also, disable nagle as all sends should be either full messages or unfinished sends.
This shaves an average of ~1 minute or so off of my accumulated runtime, and 10-15 seconds off of actual runtime.
Tree-SHA512: 6b61b8058e621dacf0b4dd353c10e3666fbda0691440eb6ebc432491ebada80a781dcd09291bf03e70112a41d3c2a0c91775ed08824b79bf8d0ebed11595c28b
assumevalid.py would try to send over a closed P2P connection in a loop,
hitting the following failure many times:
TestFramework.mininode (ERROR): Cannot send message. No connection to node!
The test still passes, but this is a lot of noise in the test log.
Just check that the connection is open before trying to send.
Because the poll/select loop may pause for 100msec before actually doing a
send, and we have no way to force the loop awake, try sending from the calling
thread if the queue is empty.
Also, disable nagle as all sends should be either full messages or unfinished
sends.
This shaves an average of ~1 minute or so off of my accumulated runtime, and
10-15 seconds off of actual runtime.
0063d2c3d [tests] Make p2p-leaktests.py more robust (John Newbery)
Pull request description:
There has been an example of p2p-leaktests.py failing on travis in the new service bits test (introduced in #11001 . It appeared to me that the previous p2p connections had not been fully disconnected before attempting to add new p2p connections.
I've added a sleep and restarted the NetworkThread, but I don't know whether this will fix the problem, since I'm unable to reproduce the failure locally.
@MarcoFalke - not sure what you want to do here? I don't think this change could make things any worse.
Tree-SHA512: f5427c26267185a903c9b75bb3925bf153b8afce70c8e493bf8f585f57d809d20643b4ee69081300b211d22e960242aecc3d719f4ddd230aa08fdc5484b55055
fadd0c16b [qa] zapwallettxes: Wait up to 3s for mempool reload (MarcoFalke)
Pull request description:
There had been intermittent test failures on zapwallettxes, as no time was allotted to reload the mempool.
Tree-SHA512: 993254d2aaca6ea42fceefffed0cf90bdda91c64150179ef2a11337c3fe2cc6bf42b83ea9d9a1a575204fbde2676d7203443b00d053e8c2ed43e017c09d3ab11
8fdb6f912 [tests] fixup dbcrash interaction with add_nodes() (John Newbery)
Pull request description:
Another conflict with #11121. Apologies - this is entirely my fault. I didn't run the extended test suite after rebasing on master.
@MarcoFalke @sdaftuar
Tree-SHA512: eefce1d1c63dc4a63c5e030a541e046ad4832e8a709c0a8aad40ffdc4712b2065486778b406dfa57cfd34e66db86064278ee3fea8f2c2afd2390772875e6fa3e
* This removes block-size-limiting code in favor of GBT clients
doing the limiting themselves (if at all).
* -blockmaxsize is deprecated and only used to calculate an implied
blockmaxweight, addressing confusion from multiple users.
* getmininginfo's currentblocksize return value was returning
garbage values, and has been removed, also removing a
GetSerializeSize call in some block generation inner loops and
potentially addressing some performance edge cases.
713a92073 Remove usehd option and warn when it is used (Andrew Chow)
d4c18f733 Bump wallet version number to 159900 (Andrew Chow)
Pull request description:
Bump the wallet version number to 159900 so that new wallets made without a default key will no longer work on previous versions at all. Also remove the `usehd` option to avoid weird interaction with wallet version numbers and HD-ness of wallets.
Tree-SHA512: dd7965505bfad6a926c79afd423236f509229a398a8398076f8d57d90a5974243f9459a61225c4daee560c796f427445c9e55a3ad528a3a97a9123ca6a1269ab
aece8a463 (finally) remove getinfo in favor of more module-specific infos (Matt Corallo)
Pull request description:
I see no reason not to have done this in 0.13, let alone for 0.15.
Tree-SHA512: ed3e36f99e9cb90304089e5957ddfbf74141e3e77d850e498e9e45dd8bc1deb9fe36b3fec4c43243023268670a45808de3c23d660df76fa27db6688814c464a5
1aa97ee08 Add savemempool RPC (Lawrence Nahum)
467cbbcbf Add return value to DumpMempool (Lawrence Nahum)
Pull request description:
Adds a simple parameterless rpc command to dump the mempool.
Rationale:
Sometimes there can be a crash for whatever reason (bug, power loss, etc) causing the mempool.dat file to not be saved.
This change allows to script/cron the rpc call to have more regular saves to the file as well as cli/ad-hoc.
This should solve issue https://github.com/bitcoin/bitcoin/issues/11086
Tree-SHA512: e856ae9777425a4521279c9b58e69285d8e374790bebefd3284cf91931eac0e456f86224f427a087a01bf70440bf6e439fa02c8a34940eb1046ae473e98b6aaa
617c459c6 qa: rpc test for wtxid in mempool entry (Suhas Daftuar)
7e5d5965d RPC: add wtxid to mempool entry output (Suhas Daftuar)
Pull request description:
We already cache this information in the mempool, so including it in the output of rpc calls is basically free.
Tree-SHA512: 2757e1bfca028103937e4b76ce1a5d805846bad5d3d9dd631dcc5f87721bcc0e9d19e437e02053ef1dd3b38b503f0fca8c0b8492cac37dfbd70256a3665f704c
faa8d9581 [qa] TestNode: Add wait_until_stopped helper method (MarcoFalke)
Pull request description:
This adds a helper method `wait_until_stopped` to the `TestNode` class. This should prevent numerous `time.sleep()` over all places.
Additionally, the timeout behavior is restored. (Was removed by the introduction of `TestNode`.)
This should prevent tests from running indefinitely by accident.
Tree-SHA512: 7133fc64d55711869c4e372e9d30625c98f1237fb3578c24a26900d9319831f10eb95592d7b08e536fa706158dffb0abf9197f11c5d9ef605c880628e1a6533f
eac64bb7a [qa] Test nMinimumChainWork (Suhas Daftuar)
0311836f6 Allow setting nMinimumChainWork on command line (Suhas Daftuar)
Pull request description:
As discussed briefly here: https://botbot.me/freenode/bitcoin-core-dev/2017-02-28/?msg=81712308&page=4
This adds a hidden command line option for setting `nMinimumChainWork`, which allows us to test this parameter in our functional tests, as well as allowing for niche use cases like syncing nodes that are otherwise disconnected from the network.
See also #10345, which proposes a new use of `nMinimumChainWork`.
Tree-SHA512: fe4d8f4f289697615c98d8760f1cc74c076110310ea0b5b875fcab78c127da9195b4eb84148aebacc7606c246e5773d3f13bd5d9559d0a8bffac20a3a28c62df
Nodes don't consider themselves out of "initial block download" until
their active chain has more work than nMinimumChainWork.
While in initial block download, nodes won't relay blocks to their
peers, so test that this parameter functions as intended by verifying
that block relay only succeeds past a given node once its
nMinimumChainWork has been exceeded.
7148b74dc [tests] Functional tests must explicitly set num_nodes (John Newbery)
5448a1471 [tests] don't override __init__() in individual tests (John Newbery)
6cf094a02 [tests] Avoid passing around member variables in test_framework (John Newbery)
36b626867 [tests] TestNode: separate add_node from start_node (John Newbery)
be2a2ab6a [tests] fix - use rpc_timeout as rpc timeout (John Newbery)
Pull request description:
Some additional tidyups after the introduction of TestNode:
- commit 1 makes TestNode use the correct rpc timeout. This should have been included in #11077
- commit 2 separates `add_node()` from `start_node()` as originally discussed here: https://github.com/bitcoin/bitcoin/pull/10556#discussion_r121161453 with @kallewoof . The test writer no longer needs to assign to `self.nodes` when starting/stopping nodes.
- commit 3 adds a `set_test_params()` method, so individual tests don't need to override `__init__()` and call `super().__init__()`
Tree-SHA512: 0adb030623b96675b5c29e2890ce99ccd837ed05f721d0c91b35378c5ac01b6658174aac12f1f77402e1d38b61f39b3c43b4df85c96952565dde1cda05b0db84
Almost all test scripts currently need to override the __init__()
method. When they do that they need to call into super().__init__() as
the base class does some generic initialization.
This commit makes the base class __init__() call into set_test_params()
method. Individual test cases can override set_test_params() to setup
their test parameters.
Separates the act of creating a TestNode object from starting the node.
The test_framework now keeps track of its list of TestNodes, and test
writers can call start_node() and stop_node() without having to update
the self.nodes list.
4f2905b76 Add getmininginfo functional test (Cristian Mircea Messel)
Pull request description:
Add `getmininginfo` functional test in `mining.py`
Tree-SHA512: 12be9cfb37e9ac4c6625fc06051704c8a8dfd7271c2654f994c7659c8810e4b7a4335105ae159315308bcd45b65589bab1829bd134d2f4cabf74d63f2e5d22fe
6d2d2eb49 RPC: gettxout: Slightly improve doc and tests (Jorge Timón)
Pull request description:
Slightly related to https://github.com/bitcoin/bitcoin/pull/10822 in the sense that I felt the documentation and testing wasn't as good as it could be while writing it.
Ping @sipa since we discussed this on IRC.
Tree-SHA512: a0b3ffdac65245a0429e772fc2d8bcc1e829b02c70fb2af6ee0b7578cae46683f6c51a824b4d703d4dc3f99b6f03a658d6bbc818bf32981516f24124249a211d
c6ec4358a [tests] Add bitcoin_cli.py test script (John Newbery)
b23549f6e [tests] add TestNodeCLI class for calling bitcoin-cli for a node (John Newbery)
Pull request description:
We don't test bitcoin-cli at all. That means that we can miss inconsistencies between the bitcoin-cli client and the RPC interface, such as #10698 and #10747. It also means that the various bitcoin-cli options and features are untested and regressions could be silently introduced.
Let's fix that.
This PR adds bitcoin-cli testing in the python functional test_framework:
1. Add a bitcoin_cli.py test script that tests bitcoin-cli. At the moment it only tests that the result of `getinfo` is the same if you run it as an RPC or through bitcoin-cli, but can easily be extended to test additional bitcoin-cli features
**EDIT: `--usecli` option is moved to a separate PR. This PR now only covers the bitcoin_cli.py test.**
2. ~Add a `--usecli` option to the test framework. This changes the test to use bitcoin-cli for all RPC calls instead of using direct HTTP requests. This is somewhat experimental. It works for most tests, but there are some cases where it can't work transparently because:~
- ~the testcase is asserting on a specific error code, and bitcoin-cli returns a different error code from the direct RPC~
- ~we're sending a very large RPC request (eg `submitblock`) and it can't be serialized into a shell bitcoin-cli call.~
~I think that even though `--usecli` doesn't work on all tests, it's still a useful experimental feature. Future potential enhancements:~
- ~enhance the framework to automatically skip tests that are known to fail with bitcoin-cli if the `--usecli` option is used.~
- ~run a subset of tests in Travis with `-usecli`~
This builds on and requires the `TestNode` PR #10711 . As an aside, this is a good demonstration of how tidy it is to add additional features/interfaces now that test node logic/state is encapsulated in a TestNode class.
Addresses #10791
Tree-SHA512: a1e6be12e8e007f6f67b3d3bbcd142d835787300831eb38e6027a1ad25ca9d79c4bc99a41b19e31ee95205cba1b3b2d21a688b5909316aad70bfc2b4eb6d8a52
08ce33f8e qa: Move wait_until to util (MarcoFalke)
Pull request description:
This moves `wait_until` to `util.py` to make it generally available to python tests.
Also, `wait_until` now takes an optional lock that is acquired while testing the predicate.
Previously the lock was always acquired, even when it was not necessary, cf. `disconnect_ban.py`.
Tree-SHA512: 18e452a017a6566fa8ad09bde058e1b841e167039dc63299e70cfa7a6dcbc779581e60ca3e8eb2f1b610767d5208b9376c203eb11015b250fd0542b5eb4215a8
Fixes a couple of bugs from the introduction of TestNode:
- test scripts were no longer able to specify a custom timeout for
starting a node. Therefore tests with nodes that take a long time to
start up (eg pruning.py) would fail.
- the test for whether a node has failed on start up was broken
by changing 'assert x is None' to 'assert not x'. Since
subprocess.poll() can return None (indicating the node is still running)
or 0 (indicating the node exited with return code 0), this was a
regression.
When running the tests locally with a parallelism of 4 on an otherwise
busy system, RPC can take quite a wait to come up.
Change the timeout to 60 seconds just to be safe.
e53615b Remove vchDefaultKey and have better first run detection (Andrew Chow)
Pull request description:
Removes vchDefaultKey which was only used for first run detection. Improves wallet first run detection by checking to see if any keys were read from the database.
This also fixes a (rather contrived) case where an encrypted non-HD wallet has corruption such that the default key is no longer valid and is loaded into a Core version that supports HD wallets. This causes a runtime exception since a new hd master key is generated as the software believes the wallet file is newly created but cannot add the generated key to the wallet since it is encrypted. I was only able to replicate this error by creating a non-hd wallet, encrypting it, then editing the wallet using `db_dump` and `db_load` before loading the wallet with hd enabled. This problem has been reported by [two](https://bitcointalk.org/index.php?topic=1993244.0) [users](https://bitcointalk.org/index.php?topic=1746976.msg17511261#msg17511261) so it is something that can happen, although that raises the question of "what corrupted the default key".
~P.S. I don't know what's up with the whitespace changes. I think my text editor is doing something stupid but I don't think those are important enough to attempt undoing them.~ Undid those
Tree-SHA512: 63b485f356566e8ffa033ad9b7101f7f6b56372b29ec2a43b947b0eeb1ada4c2cfe24740515d013aedd5f51aa1890dfbe499d2c5c062fc1b5d272324728a7d55
1d8df0141 Fix MD formatting in REST-interface.md and spelling mistake in test_runner.py (MeshCollider)
41f3e84aa Fix inconsistencies and grammar in various files (MeshCollider)
Pull request description:
Just a simple fix of some inconsistent capitalization, formatting and grammar in a few files (no code changes)
Tree-SHA512: 60b12a5a5c69a1af4a25b7db0b32ed806ed62ad2966cee08b3792a7cfa7f51848fd485349b4c09e60a7eedfdf55ee730c51daa066d6e226ae404c93342bf3e13
f42fc1d50 doc: spelling fixes (klemens)
Pull request description:
patch contains some spelling fixes ( just in comments ) as found by a bot ( http://www.misfix.org, https://github.com/ka7/misspell_fixer ).
Tree-SHA512: ba6046cfcd81b0783420daae7d776be92dd7b85a593e212f8f1b4403aca9b1b6af12cef7080d4ea5ed4a14952fd25e4300109a59c414e08f5395cdb9947bb750
Removes vchDefaultKey which was only used for first run detection.
Improves wallet first run detection by checking to see if any keys
were read from the database.
This will now also check for a valid defaultkey for backwards
compatibility reasons and to check for any corruption.
Keys will stil be generated on the first one, but there won't be
any shown in the address book as was previously done.
TestNode is a class responsible for all state related to a bitcoind node
under test. It stores local state, is responsible for tracking the
bitcoind process and delegates unrecognised messages to the RPC
connection.
This commit changes start_nodes and stop_nodes to start and stop the
bitcoind nodes in parallel, making test setup and teardown much faster.
d34957e [wallet] [tests] Add keypool topup functional test (Jonas Schnelli)
095142d [wallet] keypool mark-used and topup (John Newbery)
c25d90f [wallet] Add HasUnusedKeys() helper (John Newbery)
f2123e3 [wallet] Cache keyid -> keypool id mappings (John Newbery)
83f1ec3 [wallet] Don't hold cs_LastBlockFile while calling setBestChain (John Newbery)
2376bfc [wallet] [moveonly] Move LoadKeyPool to cpp (Matt Corallo)
cab8557 [wallet] [moveonly] Move CAffectedKeysVisitor (Jonas Schnelli)
Pull request description:
This PR contains the first part of #10882 :
- if a key from the keypool is used, mark all keys up to that key as used, and then try to top up the keypool
- top up the keypool on startup
Notably, it does not stop the node or prevent the best block from advancing if the keypool drops below a threshold (which means that transactions may be missed and funds lost if restoring from an old HD wallet backup).
Tree-SHA512: ac681fefeaf7ec2aab2fa1da93d12273ea80bd05eb48d7b3b551ea6e5d975dd97ba7de52b7fba52993823280ac4079cc36cf78a27dac708107ebf8fb6326142b
cc5d38f4b Add option to attach a python debugger if test fails (John Newbery)
Pull request description:
Adds a simple option to the test_framework to attach pdb if the test fails.
Helpful for catching and debugging intermittent failures: Run the test in a loop with this option. The first failure will cause execution to pause and nodes will be left running for interactive debugging.
@sdaftuar
Tree-SHA512: 01cfae15fa3f04ed6ec6a99fef60a6c6a59723429309e81eacd6767caf12f5758f59b337804291ecab33a38a2958f36e2b513d201bee72a2eeb207a67046f952
faa76d1b7 qa: Fix inv race in example_test (MarcoFalke)
Pull request description:
There have been intermittent test failures on this script.
```py
File "./test/functional/example_test.py", line 216, in run_test
assert_equal(block, 1)
AssertionError: not(2 == 1)
```
Probably the simplest way to fix them is overriding the `on_inv` method, so that no "colliding" getdata for the blocks are sent out.
Additionally, all getdata are now sent in a single message.
Tree-SHA512: 809c2bbfa90a67fc97905769fcbe90ba9abe1aac1f145530934f56a364835973b94d3302b6be68f4f2987acf333bce146bcc4c878c283301871ba5bb1a9bedb6
This commit adds basic keypool mark-used and topup:
- try to topup the keypool on initial load
- if a key in the keypool is used, mark all keys before that as used and
try to top up
13b1e9a16 Capitalize bullet points in CONTRIBUTING guide (Evan Klitzke)
Pull request description:
English grammar dictates that these bullet points should be capitalized.
This also makes the capitalization style consistent with the rest of the
document, e.g. the "Decision Making Process" section.
Tree-SHA512: 59f5a8941180ff3862ba63d364c27fd83d2e144299a71b2e784d58f806e8a02d7951dcc80fcc7152d0c78c2d1f5a22db1236af7ea6b9abece8dbe93533e4b65c
4ccc12a54 [qa] Rewrite BIP66 functional tests (Suhas Daftuar)
d4f0d87b6 [qa] Rewrite BIP65 functional tests (Suhas Daftuar)
Pull request description:
After 122786d0e0, BIP65 and BIP66 activate at
particular fixed heights (without regard to version numbers of blocks
below those heights). Rewrite the functional tests to take
this into account, and remove two tests that weren't really testing anything.
Moves the rewritten functional tests out of the extended test suite, so that they run in travis regularly.
Note: I discovered that the ComparisonTestFramework (which the original versions of these p2p tests were written is, has a bug that caused them to not catch obvious errors, eg if you just comment out setting the script flags for these softforks in ConnectBlock, the versions of these tests in master do not fail(!) -- will separately PR a fix for the comparison test framework).
Tree-SHA512: 2108b79951f2e980854d0d14ccc0fd1810a43dd4251fd6e3b203e7f104ea55e00650bb1a60a28c2801b4249f46563a8559ac3e3cd39db220914acfed0b3b163d
English grammar dictates that these bullet points should be capitalized.
This also makes the capitalization style consistent with the rest of the
document, e.g. the "Decision Making Process" section.
In v0.15, we disconnect nodes that send us version messages with
unsupported service bits (1 << 5 and 1 << 7). This commit adds a test
that bitcoind will disconnect those nodes before August 1st 2018, and won't
disconnect those nodes after August 1st 2018.
e222dc2 Replace ismine with producesignature check in witnessifier (Andrew Chow)
Pull request description:
Instead of using ismine to check whether an address can be spent by us, make the witness version of the script or address first and then use ProduceSignature with the DummySignatureCreator to check if we can
solve for the script.
This is to fix cases where we don't have all of the private keys (for something like a multisig address) but have the redeemscript so we can witnessify it.
Tree-SHA512: 371777aee839cceb41f099109a13689120d35cf3880cde39216596cc2aac5cc1096af7d9cf07ad9306c3b05c073897f4518a7e97f0b88642f1e3b80b799f481e
Instead of using ismine to check whether an address can be spent by us,
make the witness version of the script or address first and then use
ProduceSignature with the DummySignatureCreator to check if we can
solve for the script.
Also fixes test cases to reflect this change.
Raise RPC_WALLET_NOT_SPECIFIED instead of RPC_METHOD_NOT_FOUND when a required
wallet filename was not specified in an RPC call.
Also raise more specific RPC_WALLET_NOT_FOUND error instead of
RPC_INVALID_PARAMETER in case an invalid wallet was specified, for consistency.
This reverts commit d64ac3f4aa after further discussion.
Tree-SHA512: db1e4ff5b17bcd6fd000a3d21aa74f6b7e4c194e0663c1896a100612671910a7cdadd896b59642420ea016598895b54a8468914847ebefef105a3c47c311d4b2
d64ac3f [tests] Allow tests to pass when stderr is non-empty (Jonas Schnelli)
Pull request description:
Resurrect #10241 with nits addressed
Not sure how much people want this. Would be useful for functional tests which cause bitcoind to print to stderr.
Tree-SHA512: 28caccf7818fb3ed5a38caef7f77161b1678aa9b8fd12c2d1e76032f409f0d33c40f7ac91e0c8d908df4a44fd01cf97d657a08bae50c6ff17d07f5b2e20c3a6e
876e92b Testing: listsinceblock should display all transactions that were affected since the given block, including transactions that were removed due to a reorg. (Karl-Johan Alm)
f999c46 listsinceblock: optionally find and list any transactions that were undone due to reorg when requesting a non-main chain block in a new 'removed' array. (Karl-Johan Alm)
Pull request description:
The following scenario will not notify the caller of the fact `tx0` has been dropped:
1. User 1 receives BTC in tx0 from utxo1 in block aa1.
2. User 2 receives BTC in tx1 from utxo1 (same) in block bb1
3. User 1 sees 2 confirmations at block aa3.
4. Reorg into bb chain.
5. User 1 asks `listsinceblock aa3` and does not see that tx0 is now invalidated.
See `listsinceblock.py` commit for related test.
The proposed fix is to iterate from the given block down to the fork point, and to check each transaction in the blocks against the wallet, in addition to including all transactions from the fork point to the active chain tip (the current behavior). Any transactions that were present will now also be listed in the `listsinceblock` output in a new `replaced` array. This operation may be a bit heavy but the circumstances (and perceived frequency of occurrence) warrant it, I believe.
Example output:
```Python
{
'transactions': [],
'replaced': [
{
'walletconflicts': [],
'vout': 1,
'account': '',
'timereceived': 1485234857,
'time': 1485234857,
'amount': '1.00000000',
'bip125-replaceable': 'unknown',
'trusted': False,
'category': 'receive',
'txid': 'ce673859a30dee1d2ebdb3c05f2eea7b1da54baf68f93bb8bfe37c5f09ed22ff',
'address': 'miqEt4kWp9zSizwGGuUWLAmxEcTW9bFUnQ',
'label': '',
'confirmations': -7
}
],
'lastblock': '7a388f27d09e3699102a4ebf81597d974fc4c72093eeaa02adffbbf7527f6715'
}
```
I believe this addresses the comment by @luke-jr in https://github.com/bitcoin/bitcoin/pull/9516#issuecomment-274190081 but I could be wrong..
Tree-SHA512: 607b5dcaeccb9dc0d963d3de138c40490f3e923050b29821e6bd513d26beb587bddc748fbb194503fe618cfe34a6ed65d95e8d9c5764a882b6c5f976520cff35
6b4f231 Move transaction combining from signrawtransaction to new RPC (Andrew Chow)
Pull request description:
Create a combinerawtransaction RPC which accepts a json array of hex raw transactions to combine them into one transaction. Signrawtransaction is changed to no longer combine transactions and only accept one transaction at a time.
The tests have been updated to test this. Tests for the signrawtransaction merge have also been removed.
This is part of #10570
Tree-SHA512: 035aebbd6537c1c017d5c8e06d309228b4c23fe52d5b31ffde19741c81a11a6346ddbbdc582b77b02a47f4c22b1952b69d3c2ee1109c29b3f0f1b612d8de53ed
Create a combinerawtransaction RPC which accepts a json array of hex raw
transactions to combine them into one transaction. Signrawtransaction is changed
to no longer combine transactions and only accept one transaction at a time.
cf82a9e Do not allow users to get keys from keypool without reserving them (Matt Corallo)
Pull request description:
fundrawtransaction allows users to add a change output and then
not have it removed from keypool. While it would be nice to have
users follow the normal CreateTransaction/CommitTransaction process
we use internally, there isnt much benefit in exposing this option,
especially with HD wallets, while there is ample room for users to
misunderstand or misuse this option.
This partially reverts #9377. Would be nice to get this for 15 since its kinda crazy we have this option to begin with IMO, will need release notes as an RPC option is now ignored.
Tree-SHA512: 72b5ee9c4a229b84d799dfb00c56fe80d8bba914ce81a433c3f5ab325bf9bf2b839ee658c261734f0ee183ab19435039481014d09c41dbe155e6323e63beb01d
fundrawtransaction allows users to add a change output and then
not have it removed from keypool. While it would be nice to have
users follow the normal CreateTransaction/CommitTransaction process
we use internally, there isnt much benefit in exposing this option,
especially with HD wallets, while there is ample room for users to
misunderstand or misuse this option.
This could be particularly nasty in some use-cases (especially
pre-HD-split) - eg a user might fundrawtransaction, then call
getnewaddress, hand out the address for someone to pay them, then
sendrawtransaction. This may result in the user thinking they have
received payment, even though it was really just their own change!
This could obviously result in needless key-reuse.
zapwallettxes previously did not interact well with persistent mempool.
zapwallettxes would cause wallet transactions to be zapped, but they
would then be reloaded from the mempool on startup. This commit softsets
persistmempool to false if zapwallettxes is enabled so transactions are
actually zapped.
11ba8e9 [tests] rename getblocktemplate_proposals.py to mining.py (John Newbery)
b29dd41 [tests] add test for submit block (John Newbery)
9bf0d80 [tests] run successful test in getblocktemplate first (John Newbery)
82dc597 [tests] don't build blocks manually in getblocktemplate test (John Newbery)
f82c709 [tests] clarify assertions in getblocktemplate test (John Newbery)
66c570a [tests] Don't build the coinbase manually in getblocktemplate test (John Newbery)
38b38cd [tests] getblocktemplate_proposals.py: add logging (John Newbery)
0a3a5ff [tests] Fix flake8 warnings in getblocktemplate tests (John Newbery)
32cffe6 [tests] Fix import order in getblocktemplate test (John Newbery)
Tree-SHA512: a51a57314fa1c4c4b8a7896492ec6e677b6bed12387060def34a62e9dfbee7961f71bb5553fbd70028be61ae32eccf13fd255fa9651f908e9a5e64c28f43f00e
bc7d103 Fix multi_rpc test for hosts that dont default to utf8 (Matt Corallo)
Tree-SHA512: 7644b1f50d4010a08aed5d1c87ab7326af9c109ac05dfbfc4bb6d5a19ace7997ef9cdd64d4301072f1106225de6d3aacccb17f53043b55ba61f5723c2b65af30
Rewrite the BIP66 functional tests to reflect height-based activation,
and move it out of the extended test suite.
Remove the unnecessary bipdersig.py test
After 122786d0e0, BIP65 activates at
a particular height (without regard to version numbers of blocks
below that height). Rewrite the BIP65 functional tests to take
this into account, and add a test case that exercises
OP_CHECKLOCKTIMEVERIFY in a block where the soft-fork is active.
Also moves the bip65 functional test out of the extended test suite.
This commit moves functions start_node, start_nodes, stop_node and
stop_nodes functions into the BitcoinTestFramework class. It also moves
the bitcoind_processes dict and coverage variables into BitcoinTestFramework.
176c021 [qa] Test non-atomic chainstate writes (Suhas Daftuar)
d6af06d Dont create pcoinsTip until after ReplayBlocks. (Matt Corallo)
eaca1b7 Random db flush crash simulator (Pieter Wuille)
0580ee0 Adapt memory usage estimation for flushing (Pieter Wuille)
013a56a Non-atomic flushing using the blockchain as replay journal (Pieter Wuille)
b3a279c [MOVEONLY] Move LastCommonAncestor to chain (Pieter Wuille)
Tree-SHA512: 47ccc62303f9075c44d2a914be75bd6969ff881a857a2ff1227f05ec7def6f4c71c46680c5a28cb150c814999526797dc05cf2701fde1369c06169f46eccddee
Adds new functional test, dbcrash.py, which uses -dbcrashratio to exercise the
logic for recovering from a crash during chainstate flush.
dbcrash.py is added to the extended tests, as it may take ~10 minutes to run
Use _Exit() instead of exit() for crash simulation
This eliminates stderr output such as:
terminate called without an active exception
or
Assertion failed: (!pthread_mutex_destroy(&m)), function ~recursive_mutex, file /usr/local/include/boost/thread/pthread/recursive_mutex.hpp, line 104.
Eliminating the stderr output on crash simulation allows testing with
test_runner.py, which reports a test as failed if stderr is produced.
A few "a->an" and "an->a".
"Shows, if the supplied default SOCKS5 proxy" -> "Shows if the supplied default SOCKS5 proxy". Change made on 3 occurrences.
"without fully understanding the ramification of a command" -> "without fully understanding the ramifications of a command".
Removed duplicate words such as "the the".
279fde5 Check for rpcuser/rpcpassword first then for cookie (Andrew Chow)
3ec5ad8 Add test for rpcuser/rpcpassword (Andrew Chow)
c53c983 Replace cookie auth in tests (Andrew Chow)
Tree-SHA512: 21efb84c87080a895cac8a7fe4766738c34eebe9686c7d10af1bf91ed4ae422e2d5dbbebffd00d34744eb6bb2d0195ea3aca86deebf085bbdeeb1d8b474241ed
This has no effect on the outcome of test cases, but
prints shorter and less confusing tracebacks on fails.
I.e. does not print an obvious "ConnectionRefusedError"
when shutting down the nodes due to an invalid return code.
Better to check that rpcuser and rpcpassword exist then to check for
the cookie in the test framework.
Name an argument for consistency in p2p-segwit.py
0a4912e [tests] timeout integration tests on travis after 20 minutes (John Newbery)
7c51e9f [tests] destroy zmq context in zmq_tests.py (John Newbery)
b1bac1c [tests] in zmq test, timeout if message not received (John Newbery)
5ebd5f9 [tests] tidy up zmq_test.py (John Newbery)
4a0c08f [tests] update zmq test to use correct config.ini file (John Newbery)
Tree-SHA512: 5e607af2f2dc5c73fba4b2d3890097580a7525f6a4996c7c78f01822e45e0054fd0a225ea53fce6308804e560cced6de6cf5d16137469dcf100b2e9643e08d03
6294f32 gettxoutproof() should return consistent result (John Newbery)
Tree-SHA512: 1c36f78ea07a3bdde09e9494207b4372d54bcd94ed2d56e339e78281f6693e26a93e4c3123453d5c0f6e994d0069d5a1c806786c4af71864f87ea4841611c379
We can call gettxoutproof() with a list of transactions. Currently, if
the first transaction is unspent (and all other transactions are in the
same block), then the call will succeed. If the first transaction has
been spent, then the call will fail. The means that the following two
calls will return different results:
gettxoutproof(unspent_tx1, spent_tx1)
gettxoutproof(spent_tx1, unspent_tx1)
This commit makes behaviour independent of transaction ordering by looping
through all transactions provided and trying to find which block they're in.
This commit also increases the test coverage and tests more failure
cases for gettxoutproof()
9a5a1d7 RPC/rawtransaction: createrawtransaction: Check opt_into_rbf when provided with either value (Luke Dashjr)
23b0fe3 bitcoin-tx: rbfoptin: Avoid touching nSequence if the value is already opting in (Luke Dashjr)
b005bf2 Introduce MAX_BIP125_RBF_SEQUENCE constant (Luke Dashjr)
575cde4 [bitcoin-tx] add rbfoptin command (Jonas Schnelli)
5d26244 [Tests] extend the replace-by-fee test to cover RPC rawtx features (Jonas Schnelli)
36bcab2 RPC/Wallet: Add RBF support for fundrawtransaction (Luke Dashjr)
891c5ee Wallet: Refactor FundTransaction to accept parameters via CCoinControl (Luke Dashjr)
578ec80 RPC: rawtransaction: Add RBF support for createrawtransaction (Luke Dashjr)
Tree-SHA512: 446e37c617c188cc3b3fd1e2841c98eda6f4869e71cb3249c4a9e54002607d0f1e6bef92187f7894d4e0746ab449cfee89be9f6a1a8831e25c70cf912eac1570
8ad5bde Merge bctest.py into bitcoin-util-test.py (John Newbery)
95836c5 Use shared config file for functional and util tests (John Newbery)
89fcd35 Use an .ini config file for environment vars in bitcoin-util-test.py (John Newbery)
e9265df Change help_text in bitcoin-util-test.py to a docstring. (John Newbery)
ce58e93 Change bitcoin-util-test.py to use Python3 (John Newbery)
Tree-SHA512: 66dab0b4a8546aee0dfaef134a165f1447aff4c0ec335754bbc7d9e55909721c62f09cdbf4b22d02ac1fcd5a9b66780f91e1cc4d8687fae7288cc9072a23a78f
cc36b5e [test] Add test for getchaintxstats (Jimmy Song)
Tree-SHA512: a992b55f945118ad7410ab8d7ae7d2696e94a2d4a861d633f4501c439364027e2fddd522cb8b5ed3eb621ec4ed0e9fc683e0139aa6c2e2e27c361640f85f1876
930deb9 [tests] skipped tests should clean up after themselves (John Newbery)
Tree-SHA512: ed486c1cf144c223efa738a66e8bb407089a23002871ef5b15c43d4c08641038a20253fc286853b457d66f37a52c81c16f7988aef90635ac262df6ce7bab9b18
589827975 scripted-diff: various renames for per-utxo consistency (Pieter Wuille)
a5e02bc7f Increase travis unit test timeout (Pieter Wuille)
73de2c1ff Rename CCoinsCacheEntry::coins to coin (Pieter Wuille)
119e552f7 Merge CCoinsViewCache's GetOutputFor and AccessCoin (Pieter Wuille)
580b02309 [MOVEONLY] Move old CCoins class to txdb.cpp (Pieter Wuille)
8b25d2c0c Upgrade from per-tx database to per-txout (Pieter Wuille)
b2af357f3 Reduce reserved memory space for flushing (Pieter Wuille)
41aa5b79a Pack Coin more tightly (Pieter Wuille)
97072d668 Remove unused CCoins methods (Pieter Wuille)
ce23efaa5 Extend coins_tests (Pieter Wuille)
508307968 Switch CCoinsView and chainstate db from per-txid to per-txout (Pieter Wuille)
4ec0d9e79 Refactor GetUTXOStats in preparation for per-COutPoint iteration (Pieter Wuille)
13870b56f Replace CCoins-based CTxMemPool::pruneSpent with isSpent (Pieter Wuille)
05293f3cb Remove ModifyCoins/ModifyNewCoins (Pieter Wuille)
961e48397 Switch tests from ModifyCoins to AddCoin/SpendCoin (Pieter Wuille)
8b3868c1b Switch CScriptCheck to use Coin instead of CCoins (Pieter Wuille)
c87b957a3 Only pass things committed to by tx's witness hash to CScriptCheck (Matt Corallo)
f68cdfe92 Switch from per-tx to per-txout CCoinsViewCache methods in some places (Pieter Wuille)
000391132 Introduce new per-txout CCoinsViewCache functions (Pieter Wuille)
bd83111a0 Optimization: Coin&& to ApplyTxInUndo (Pieter Wuille)
cb2c7fdac Replace CTxInUndo with Coin (Pieter Wuille)
422634e2f Introduce Coin, a single unspent output (Pieter Wuille)
7d991b55d Store/allow tx metadata in all undo records (Pieter Wuille)
c3aa0c119 Report on-disk size in gettxoutsetinfo (Pieter Wuille)
d34242430 Remove/ignore tx version in utxo and undo (Pieter Wuille)
7e0032290 Add specialization of SipHash for 256 + 32 bit data (Pieter Wuille)
e484652fc Introduce CHashVerifier to hash read data (Pieter Wuille)
f54580e7e error() in disconnect for disk corruption, not inconsistency (Pieter Wuille)
e66dbde6d Add SizeEstimate to CDBBatch (Pieter Wuille)
Tree-SHA512: ce1fb1e40c77d38915cd02189fab7a8b125c7f44d425c85579d872c3bede3a437760997907c99d7b3017ced1c2de54b2ac7223d99d83a6658fe5ef61edef1de3
This commit marks the start/stop functions in util.py as private module
functions. A future PR will remove these entirely and move the
functionality directly into the BitcoinTestFramework class, but setting them as
private in this PR will prevent anyone from accidentally calling them
before that future PR is merged.
This makes the following changes:
* In undo data and the chainstate database, the transaction nVersion
field is removed from the data structures, always written as 0, and
ignored when reading.
* The definition of hash_serialized in gettxoutsetinfo is changed to no
longer incude the nVersion field. It is renamed to hash_serialized_2
to avoid confusion. The new definition also includes transaction
height and coinbase information, as this information was missing
before.
This depends on having a CHashVerifier-based undo data checksum
verifier.
Apart from changing the definition of serialized_hash, downgrading
after using this patch is supported, as no release ever used the value
of nVersion field in UTXO entries.
38bc1ec Make more json-like output from estimaterawfee (Alex Morcos)
2d2e170 Comments and improved documentation (Alex Morcos)
ef589f8 minor cleanup: remove unnecessary variable (Alex Morcos)
3ee76d6 Introduce a scale factor (Alex Morcos)
5f1f0c6 Historical block span (Alex Morcos)
aa19b8e Clean up fee estimate debug printing (Alex Morcos)
10f7cbd Track first recorded height (Alex Morcos)
3810e97 Rewrite estimateSmartFee (Alex Morcos)
c7447ec Track failures in fee estimation. (Alex Morcos)
4186d3f Expose estimaterawfee (Alex Morcos)
2681153 minor refactor: explicitly track start of new bucket range and don't update curNearBucket on final loop. (Alex Morcos)
1ba43cc Make EstimateMedianVal smarter about small failures. (Alex Morcos)
d3e30bc Refactor to update moving average on fly (Alex Morcos)
e5007ba Change parameters for fee estimation and estimates on all 3 time horizons. (Alex Morcos)
c0a273f Change file format for fee estimates. (Alex Morcos)
Tree-SHA512: 186e7508d86a1f351bb656edcd84ee9091f5f2706331eda9ee29da9c8eb5bf67b8c1f2abf6662835560e7f613b1377099054f20767f41ddcdbc89c4f9e78946d
d4668f3 [test] Add test for getmemoryinfo (Jimmy Song)
Tree-SHA512: f5285022504f7f3a5d85981c7c424e5cf1156167dbc4209933ea2a699b741e427f4f908f6d49435376c0e23347db24eb1129b74805cbfce5e0b4ce9e48f71fb0
fac79e4 qa: Warn when specified test is not found (MarcoFalke)
Tree-SHA512: d11ecdde275309b12e23155f6cd8e26c99217436b5094a70dd51b95ae7688754227628dd9a801eb6a52ff3ebea4420938e2fc8e9dc9cd77a4dd5c28d2b822354
de487b7 Tests: Add test for getnetworkhashps (Jimmy Song)
Tree-SHA512: b1418ad904618f639ffa34dd40906692aff1fdf1a0d13a9af00039e7a6a2b758091734b89c0c91e8d455da6b15a0e435a9a9ca97a41d97bf395b844c761ffa27
Change the logic of estimateSmartFee to check a 60% threshold at half the target, a 85% threshold at the target and a 95% threshold at double the target. Always check the shortest time horizon possible and ensure that estimates are monotonically decreasing. Add a conservative mode, which makes sure that the 95% threshold is also met at longer time horizons as well.
Checks memory before and after a transaction that requires a private key.
Each time, 32 bytes of memory for a private key should be used.
Tested in wallet.py instead of its own file to save testing time.
329ac3b [tests] use wait_until in mempool_persist.py (John Newbery)
Tree-SHA512: 3f5fe3dcdb5da3b10a41f7b88d29c15b79c02fbb037914b4342b77428f2afe8b342f6adacb28a9eb5549aa156cd146175389bd61909a20df3fecb88361c4779f
20187e4 test: Add elapsed time to RPC tracing (Wladimir J. van der Laan)
Tree-SHA512: f271acedd14020cf911711577f6dd940850fa84d2577618af06a2247c940fcc5b339a86c1c7a179899c556d217a6c967c785fb311bba43a9b6073cbe470b6737
