If 950 of the last 1,000 blocks are nVersion=2, reject nVersion=1
(or zero, but no bitcoin release has created block.nVersion=0) blocks
-- 75 of last 100 on testnet3.
This rule is being put in place now so that we don't have to go
through another "express support" process to get what we really
want, which is for every single new block to include the block height
in the coinbase.
"Version 2" blocks are blocks that have nVersion=2 and
have the block height as the first item in their coinbase.
Block-height-in-the-coinbase is strictly enforced when
version=2 blocks are a supermajority in the block chain
(750 of the last 1,000 blocks on main net, 51 of 100 for
testnet). This does not affect old clients/miners at all,
which will continue producing nVersion=1 blocks, and
which will continue to be valid.
- If the height is in the first half, start at the genesis block and go up, rather than at the top
- Cache the last lookup and use it as a reference point if it's close to the next request, to make linear lookups always fast
- ensure warnings always start with "Warning:" and that the first
character after ":" is written uppercase
- ensure the first sentence in warnings ends with an "!"
- remove unneeded spaces from Warning-strings
- add missing Warning-string translation
- remove a "\n" and replace with untranslatable "<br><br>"
The new bytes are based on "11" to appeal to Gavin's 11 fetish.
This breaks existing testnet3 nodes as the blockchain files
are also versioned. To upgrade a node delete everything
except wallet.dat from your .bitcoin/testnet3 folder.
Modify CreateNewBlock so that instead of processing all transactions
in priority order, process the first 27K of transactions in
priority order and then process the rest in fee-per-kilobyte
order.
This is the first, minimal step towards better a better fee-handling
system for both miners and end-users; this patch should be easy
to backport to the old versions of Bitcoin, and accomplishes the
most important goal-- allow users to "buy their way in" to blocks
using transaction fees.
* Fix wrong thread name for wallet *relocking* thread
- Was named the unlocking thread
* Use consistent naming
Signed-off-by: Giel van Schijndel <me@mortis.eu>
NOTE: These thread names are visible in gdb when using 'info threads'.
Additionally both 'top' and 'ps' show these names *unless* told to
display the command-line instead of task name.
Signed-off-by: Giel van Schijndel <me@mortis.eu>
Adds CBlock::CURRENT_VERSION and CTransaction::CURRENT_VERSION
constants, and makes non-CURRENT_VERSION transactions nonstandard.
This will help make future upgrades smoother.
Prior to this change, each TX typically generated 3+ debug messages,
askfor tx 8644cc97480ba1537214 0
sending getdata: tx 8644cc97480ba1537214
askfor tx 8644cc97480ba1537214 1339640761000000
askfor tx 8644cc97480ba1537214 1339640881000000
CTxMemPool::accept() : accepted 8644cc9748 (poolsz 6857)
After this change, there is only one message for each valid TX received
CTxMemPool::accept() : accepted 22a73c5d8c (poolsz 42)
and two messages for each orphan tx received
ERROR: FetchInputs() : 673dc195aa mempool Tx prev not found 1e439346fc
stored orphan tx 673dc195aa (mapsz 19)
The -debugnet option, or its superset -debug, will restore the full debug
output.
- Signals now go directly from the core to WalletModel/ClientModel.
- WalletModel subscribes to signals on CWallet: Prepares for multi-wallet support, by no longer assuming an implicit global wallet.
- Gets rid of noui.cpp, the few lines that were left are merged into init.cpp
- Rename wxXXX message flags to MF_XXX, to make them UI indifferent.
- ThreadSafeMessageBox no longer returns the value `4` which was never used, converted to void.
Gets rid of `MainFrameRepaint` in favor of specific update functions that tell the UI exactly what changed.
This improves the efficiency of various handlers. Also fixes problems with mined transactions not showing up until restart.
The following notifications were added:
- `NotifyBlocksChanged`: Block chain changed
- `NotifyKeyStoreStatusChanged`: Wallet status (encrypted, locked) changed.
- `NotifyAddressBookChanged`: Address book entry changed.
- `NotifyTransactionChanged`: Wallet transaction added, removed or updated.
- `NotifyNumConnectionsChanged`: Number of connections changed.
- `NotifyAlertChanged`: New, updated or cancelled alert. As this finally makes it possible for the UI to know when a new alert arrived, it can be shown as OS notification.
These notifications could also be useful for RPC clients. However, currently, they are ignored in bitcoind (in noui.cpp).
Also brings back polling with timer for numBlocks in ClientModel. This value updates so frequently during initial download that the number of signals clogs the UI thread and causes heavy CPU usage. And after initial block download, the value changes so rarely that a delay of half a second until the UI updates is unnoticable.
If Reorganize() fails, then its caller, CBlock::SetBestChain(),
will call TxnAbort().
Redundant TxnAbort() calls are harmless. The second will return an
error return value, with no other side effects. TxnAbort() return
values are generally never checked. The impact is nil.
Loop over all inputs doing inexpensive validity checks first,
and then loop over them a second time doing expensive signature
checks. This helps prevent possible CPU exhaustion attacks
where an attacker tries to make a victim waste time checking
signatures for invalid transactions.
Remove orphan transactions from memory once
all of their parent transactions are received
and they're still not valid.
Thanks to Sergio Demian Lerner for suggesting this fix.
Old log message:
storing orphan tx df2244f6bc
New log message:
storing orphan tx df2244f6bc (mapsz 51)
Also, trim a few trailing whitespace in main.cpp.
Immediately issue a "getblocks", instead of a "getdata" (which will
trigger the relevant "inv" to be sent anyway), and only do so when
the previous set of invs led us into a known and attached part of
the block tree.
This prevents an undefined operation in main.cpp, when shifting the hash value
left by 32 bits.
Shifting a signed int left into the sign bit is undefined in C++11.
Introduce a boolean variable for each "network" (ipv4, ipv6, tor, i2p),
and track whether we are likely to able to connect to it. Addresses in
"addr" messages outside of our network get limited relaying and are not
stored in addrman.
This will make bitcoin relay valid routable IPv6 addresses, and when
USE_IPV6 is enabled, listen on IPv6 interfaces and attempt connections
to IPv6 addresses.
FetchInputs already logs failures internally. This commit makes the logging
more consistent with other FetchInputs callsites also.
Prior to this commit, two log lines were logged for one condition:
ERROR: FetchInputs() : de15fde415 mempool Tx prev not found a2c75da227
ERROR: CTxMemPool::accept() : FetchInputs failed de15fde415
After this commit, only one line is logged:
ERROR: FetchInputs() : e0507ab2c7 mempool Tx prev not found 9a620262cd
Previously, a single TX would trigger two log lines in quick succession,
addUnchecked(): size 152
CTxMemPool::accept() : accepted c4cfdd48b7
After this change, only one log line is used:
CTxMemPool::accept() : accepted 98885e65db (poolsz 26)
Pull request #948 introduced a fix for nodes stuck on a long side branch
of the main chain. The fix was non-functional however, as the additional
getdata request was created in a first step of processing, but dropped
in a second step as it was considered redundant. This commits fixes it
by sending the request directly.
Works for wallet transactions, memory-pool transaction and block chain
transactions.
Available for all:
* txid
* version
* locktime
* size
* coinbase/inputs/outputs
* confirmations
Available only for wallet transactions:
* amount
* fee
* details
* blockindex
Available for wallet transactions and block chain transactions:
* blockhash
* time
This commit removes the dependency of serialize.h on PROTOCOL_VERSION,
and makes this parameter required instead of implicit. This is much saner,
as it makes the places where changing a version number can have an
influence obvious.
Conflict:
* cs_main in ProcessMessages() (before calling ProcessMessages)
* cs_vSend in CNode::BeginMessage
versus:
* cs_vSend in ThreadMessageHandler2 (before calling SendMessages)
* cs_main in SendMessages
Even though cs_vSend is a try_lock, if it succeeds simultaneously with
the locking of cs_main in ProcessMessages(), it could cause a deadlock.
Open database once per "tx" message, rather than multiple times,
in the case of orphan transaction presence.
As a side effect, a now-unused CTransaction::AcceptToMemoryPool()
variant is removed.
Reference miner exists for testnet-in-a-box type situations, and as a
reference. We don't care enough about highly optimized internal
mining to keep workarounds like this.
Add a pong message that is sent in reply to a ping. It echoes back a nonce
field that is now added to the ping message. Send a nonce of zero in ping
messages.
Original author: Mike Hearn @ Google
Modified Mike's change to introduce a mild form of protocol documentation in
version.h.
Where possible, use boost::filesystem::path instead of std::string or
char* for filenames. This avoids a lot of manual string tinkering, in
favor of path::operator/.
GetDataDir is also reworked significantly, it now only keeps two cached
directory names (the network-specific data dir, and the root data dir),
which are decided through a parameter instead of pre-initialized global
variables.
Finally, remove the "upgrade from 0.1.5" case where a debug.log in the
current directory has to be removed.
All client version information is moved to version.cpp, which optionally
(-DHAVE_BUILD_INFO) includes build.h. build.h is automatically generated
on supporting platforms via contrib/genbuild.sh, using git describe.
The git export-subst attribute is used to put the commit id statically
in version.cpp inside generated archives, and this value is used if no
build.h is present.
The gitian descriptors are modified to use git archive instead of a
copy, to create the src/ directory in the output. This way,
src/src/version.cpp will contain the static commit id. To prevent
gitian builds from getting the "-dirty" marker in their git-describe
generated identifiers, no touching of files or running sed on the
makefile is performed anymore. This does not seem to influence
determinism.
- rename wxMessageBox, remove redundant arguments to noui/qtui calls
- also, add flag to force blocking, modal dialog box for disk space warning etc
- clarify function naming
- no more special MessageBox needed from AppInit2, as window object is created before calling AppInit2
In cases of very large reorganisations (hundreds of blocks), a situation
may appear where an 'inv' is sent as response to a 'getblocks', but the
last block mentioned in the inv is already known to the receiver node.
However, the supplying node uses a request for this last block as a
trigger to send the rest of the inv blocks. If it never comes, the block
chain download is stuck.
This commit makes the receiver node always request the last inv'ed block,
even if it is already known, to prevent this problem.
Sometimes a new block arrives in a new chain that was already the
best valid one, but wasn't marked that way. This happens for example
when network rules change to recover after a fork.
In this case, it is not necessary to do the entire reorganisation
inside a single db commit. These can become huge, and exceed the
objects/lockers limits in bdb. This patch limits the blocks the
actual reorganisation is applied to, and adds the next blocks
afterwards in separate db transactions.
Introduce the following network rule:
* a block is not valid if it contains a transaction whose hash
already exists in the block chain, unless all that transaction's
outputs were already spent before said block.
Warning: this is effectively a network rule change, with potential
risk for forking the block chain. Leaving this unfixed carries the
same risk however, for attackers that can cause a reorganisation
in part of the network.
Thanks to Russell O'Connor and Ben Reeves.
Doing so would allow an attack on old nodes, which would relay a
standard transaction spending a BIP16 output in an invalid way,
until reaching a new node, which will disconnect their peer.
Reported by makomk on IRC.
Design goals:
* Only keep a limited number of addresses around, so that addr.dat does not grow without bound.
* Keep the address tables in-memory, and occasionally write the table to addr.dat.
* Make sure no (localized) attacker can fill the entire table with his nodes/addresses.
See comments in addrman.h for more detailed information.
This also avoids flushing setAddrKnown until 24 hours has passed,
and avoids contacting the external IP services when not listening.
Advertising non-listening nodes is just addr message spam.
It doesn't help the network, in fact it hurts the network,
and it also hurts user's privacy.
Advertising far out of sync nodes doesn't help the network—
they can't even forward (most) transactions and wastes nodes
outbound slots.
Allow mining of min-difficulty blocks if 20 minutes have gone by without mining a regular-difficulty block.
Normal rules apply every 2016 blocks, though, so there may be a very-slow-to-confirm block at the difficulty-adjustment blocks.
This also removes an un-needed sigops-per-byte check when accepting transactions to the memory pool (un-needed assuming only standard transactions are being accepted). And it only counts P2SH sigops after the switchover date.
This introduces CNetAddr and CService, respectively wrapping an
(IPv6) IP address and an IP+port combination. This functionality used
to be part of CAddress, which also contains network flags and
connection attempt information. These extra fields are however not
always necessary.
These classes, along with logic for creating connections and doing
name lookups, are moved to netbase.{h,cpp}, which does not depend on
headers.h.
Furthermore, CNetAddr is mostly IPv6-ready, though IPv6
functionality is not yet enabled for the application itself.
so it takes a flag for how to interpret OP_EVAL.
Also increased IsStandard size of scriptSigs to 500 bytes, so
a 3-of-3 multisig transaction IsStandard.
OP_EVAL is a new opcode that evaluates an item on the stack as a script.
It enables a new type of bitcoin address that needs an arbitrarily
complex script to redeem.
During the rushed transition from 0.01 BTC to 0.0005 BTC fees, we took the
approach of dropping the relay and block-inclusion fee to 0.0005 BTC
immediately, and only delayed adjusting the sending fee for the next release.
Afterward, the relay fee was lowered to 0.0001 BTC to avoid having the same
problem in the future. However, the block inclusion code was left setting
fForRelay to true! This fixes that, so the lower 0.0001 BTC allowance is (as
intended) only permitted for real relaying.
getmemorypool [data]
If [data] is not specified, returns data needed to construct a block to work on:
"version" : block version
"previousblockhash" : hash of current highest block
"transactions" : contents of non-coinbase transactions that should be included in the next block
"coinbasevalue" : maximum allowable input to coinbase transaction, including the generation award and transaction fees
"time" : timestamp appropriate for next block
"bits" : compressed target of next block
If [data] is specified, tries to solve the block and returns true if it was successful.
Collapsed multiple wallet mutexes to a single cs_wallet, to avoid deadlocks with wallet methods that acquired locks in different order.
Also change master RPC call handler to acquire cs_main and cs_wallet locks before executing RPC calls; requiring each RPC call to acquire the right set of locks in the right order was too error-prone.
Explicitly make these global variables less-global to reduce the maximum
scope of this global state.
In my experience global variables tend to be a major source of bugs. As
such the less accessible they are the less likely they are to be the
source of a bug.
Signed-off-by: Giel van Schijndel <me@mortis.eu>
Regarding https://bitcointalk.org/index.php?topic=28022.0
main.cpp has: "char pchMessageStart[4] = { 0xf9, 0xbe, 0xb4, 0xd9 };"
Per discussion on the thread linked, leaving the signedness of
pchMessageStart is unsafe for values > 0x80. This patch specifies
'unsigned char' in main.cpp and net.h.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Previously, mapAlreadyAskedFor was read from, but never added to.
The original intent was to use mapAlreadyAskedFor to keep track
of the time an item was requested and "Each retry is 2 minutes
after the last".
This implements that intent.
In the assert()s take advantage of the fact that string constants
("string") are effectively of type 'const char []', which when used in
an expression yield a non-NULL pointer.
An assertion that should always fail can thus be formulated as:
assert(!"fail);
An assertion where a text message should be added to the expression can
be written as such:
assert("message" && expression);
Signed-off-by: Giel van Schijndel <me@mortis.eu>
This commit adds support for ckeys, or enCrypted private keys, to the wallet.
All keys are stored in memory in their encrypted form and thus the passphrase
is required from the user to spend coins, or to create new addresses.
Keys are encrypted with AES-256-CBC using OpenSSL's EVP library. The key is
calculated via EVP_BytesToKey using SHA512 with (by default) 25000 rounds and
a random salt.
By default, the user's wallet remains unencrypted until they call the RPC
command encryptwallet <passphrase> or, from the GUI menu, Options->
Encrypt Wallet.
When the user is attempting to call RPC functions which require the password
to unlock the wallet, an error will be returned unless they call
walletpassphrase <passphrase> <time to keep key in memory> first.
A keypoolrefill command has been added which tops up the users keypool
(requiring the passphrase via walletpassphrase first).
keypoolsize has been added to the output of getinfo to show the user the
number of keys left before they need to specify their passphrase (and call
keypoolrefill).
Note that walletpassphrase will automatically fill keypool in a separate
thread which it spawns when the passphrase is set. This could cause some
delays in other threads waiting for locks on the wallet passphrase, including
one which could cause the passphrase to be stored longer than expected,
however it will not allow the passphrase to be used longer than expected as
ThreadCleanWalletPassphrase will attempt to get a lock on the key as soon
as the specified lock time has arrived.
When the keypool runs out (and wallet is locked) GetOrReuseKeyFromPool
returns vchDefaultKey, meaning miners may start to generate many blocks to
vchDefaultKey instead of a new key each time.
A walletpassphrasechange <oldpassphrase> <newpassphrase> has been added to
allow the user to change their password via RPC.
Whenever keying material (unencrypted private keys, the user's passphrase,
the wallet's AES key) is stored unencrypted in memory, any reasonable attempt
is made to mlock/VirtualLock that memory before storing the keying material.
This is not true in several (commented) cases where mlock/VirtualLocking the
memory is not possible.
Although encryption of private keys in memory can be very useful on desktop
systems (as some small amount of protection against stupid viruses), on an
RPC server, the password is entered fairly insecurely. Thus, the only main
advantage encryption has for RPC servers is for RPC servers that do not spend
coins, except in rare cases, eg. a webserver of a merchant which only receives
payment except for cases of manual intervention.
Thanks to jgarzik for the original patch and sipa, gmaxwell and many others
for all their input.
Conflicts:
src/wallet.cpp
Introduce SendBufferSize() and ReceiveBufferSize(), and limit
the blocks sent as response to the "getblocks" message to
half of the active send buffer size.
* A new class CKeyStore manages private keys, and script.cpp depends on access to CKeyStore.
* A new class CWallet extends CKeyStore, and contains all former wallet-specific globals; CWallet depends on script.cpp, not the other way around.
* Wallet-specific functions in CTransaction/CTxIn/CTxOut (GetDebit, GetCredit, GetChange, IsMine, IsFromMe), are moved to CWallet, taking their former 'this' argument as an explicit parameter
* CWalletTx objects know which CWallet they belong to, for convenience, so they have their own direct (and caching) GetDebit/... functions.
* Some code was moved from CWalletDB to CWallet, such as handling of reserve keys.
* Main.cpp keeps a set of all 'registered' wallets, which should be informed about updates to the block chain, and does not have any notion about any 'main' wallet. Function in main.cpp that require a wallet (such as GenerateCoins), take an explicit CWallet* argument.
* The actual CWallet instance used by the application is defined in init.cpp as "CWallet* pwalletMain". rpc.cpp and ui.cpp use this variable.
* Functions in main.cpp and db.cpp that are not used by other modules are marked static.
* The code for handling the 'submitorder' message is removed, as it not really compatible with the idea that a node is independent from the wallet(s) connected to it, and obsolete anyway.
This introduces two new source files, keystore.cpp and wallet.cpp with
corresponding headers. Code is moved from main and db, in a preparation
for a follow-up commit which introduces the classes CWallet and CKeyStore.
Transactions created with the new minimal fee policy would not be
relayed by the network. Therefore, we separate the minimal fee that
is necessary to relay and to create, leaving the creation one at
the old amount, for now.
With the separation of CENT and MIN_TX_FEE, it is now reasonable
to create change outputs between 0.01 and 0.0005, as these are
spendable according to the policy, even though they require a fee
to be paid.
Also, when enough fee was already present, everything can go into
a change output, without further increasing the fee.
When rescanning, if the scanned transaction is already in the wallet, it
is skipped. However, if someone sends a transaction, does not wait for
confirmation, switches wallets, waits for a block that contains his original
transaction, and switches wallets again, a rescan will leave his wallet
transaction (which has no merkle branch, so no confirmations) untouched.
there is no internal modification of any file in this commit
files are moved into directories according to established standards in
sourcecode distribution; these directories contain:
src - Files that are used in constructing the executable binaries,
but are not installed.
doc - Files in HTML and text format that document usage, quirks of
the implementation, and contributor checklists.
locale - Files that contain human language translation of strings
used in the program
contrib - Files contributed from distributions or other third party
implementing scripts and auxiliary programs
