Was trying to save 1 state by assuming the homepage will be in a busy state and the ad-detection code will finish first. But this is not true for those with a small Following count.
* Factor out lighthouse-result processing code for FYP re-use.
The FYP results will be in the same format as LH.
* Recsys: add ability to pass in specific uuid to use
For FYP, we want to pass the UUID as a param when searching for recommendations. The search comes before the recsys entry creation, so we need to generate the UUID first when searching, and then tell recsys to use that specific ID.
* Redux: fetch and store FYP
Note that the gid cannot be used as "hash" for the uri list -- it doesn't necessarily change when the list changes, so we can't use it to optimize redux. For now, just always update/render when re-fetched.
* UI for FYP
* Mark rendered FYPs
* Pass the FYP ID down the same way as Collection ID
Not ideal, but at least it's in the same pattern as existing code for now. The whole prop-drilling problem with the claim components will be fixed together later.
* Include 'gid' and 'uuid' in recommendation search
* Allow users to mark recommendations that they dislike
* Pass auth-token to all FYP requests + remove beacon use
beacons are unreliable and often blocked
* Only show FYP for members
* FYP readme page
* small fixes
* fyp
Co-authored-by: Thomas Zarebczan <thomas.zarebczan@gmail.com>
Ticket: 1079 Support geoblocking channels/videos
## Changes
- Replaced the .env version with iapi version.
- Includes 'videos' blocking and custom messages.
* Add last used collection to right click menu.
* Small fix for last used collection when it's a published collection.
* Update last used collection when a collection is pending or published.
* Small refactor to get the last used collection.
## Cause
When 'selectRecommendedContentForUri' is filtering results against the blocklist, it relies on claim data which could be unresolved yet. It filters to empty results for this scenario, hence the flashing message.
## Change
Just return raw results when claims are not resolved yet, so that the GUI knows it needs to show the placeholders while resolving. After resolving, it'll go through the blocklist filtering again.
Currently, homepages are still build as part of the app, so this change doesn't bring much benefit other than to support the wrapper app.
When the service is moved away from the app, we won't have to rebuild the app when homepages change, and also the ui.js bundle would be smaller without the need to code-split.
* Bump react-draggable
Old version was giving out console errors for outdated react functions
* Refactor fileRenderFloating
* Merge fileRenderMobile into fileRenderFloating
* Fixes from review
* Attempt fix failed to view live
## Issue
534 prevent new channel creation over x channels
## Notes
Also handled from the API call (`doCreateChannel`) in case there are other UI components that create channels.
- CommentsList needs to return a title with comment amounts
- mobile player dimensions needed to fill in the cover
- hid livestream header for now until figuring out a better presentation
- ~colum-reverse~ was causing problems with MUI's drawer scrolling, so reversed the chat order and made it ~column~ by default
- Hid bottom expand navigation if component not yet opened
- some other style changes in the middle
## Issue
Closes 385
## Approach
As mentioned in the ticket, the current places where that info is needed is in the Invites Page and Social Share Component.
1. Invites Page: it is already doing the fetch on mount, so no issue there.
2. Social Share: show spinner until the data is fetched.
* Add ordering Icons
* Refactor doCollectionEdit
- It required claims as parameter, when only uris are used to populate the collection, so that was changed to pass down the uris instead.
- There were unused and mostly unnecessary functions inside, for example the parameter claimIds was never used so it would never enter the claimSearch function which again would be used to generate uris, so it's better to just use uris as parameter
* Add List Reordering changes
* Add toggle button for list editing
* Add toggle on content page collection sidebar
* Enable drag-n-drop to re-order list items
https://www.youtube.com/watch?v=aYZRRyukuIw
* Allow removing all unavailable claims from a List
* Fix <g> on icons
* Fix section buttons positioning
* Move preventDefault and stopPropagation to buttons div instead of each button, preventing clicking even if disabled opening the claim
* Change dragging cursor
* Fix sizing
* Fix dragging component
* Restrict dragging to vertical axis
* Ignore shuffle state for ordering
* Fix console errors
* Mobile fixes
* Fix sidebar spacing
* Fix grey on mobile after click
* Update publish form when editing livestream + update to radios for liveststream release time
* Fix bug where upload tools may remain visible upon switching upload type, even when no option to upload is available.
* move publish source state up, when editing livestream only show scheduling option when source is none.
* Reset any set release time if switching to live stream mode.
* Update date/time cmpnts to reset any chnages they made on umount. Update schedule date/time cmpnt to clear release time when selecting anytime option.
* Additional filtering of internal tags
* Default to replay view when editing a liveststream
- Query for that tag in the upcoming section
- Improve special tag organization
- Filter out the internal tags in the UI
- Add missing types to publish state
Props: either use primitives, stable references or memoized objects to reduce renders. This update will simplify the existing `areEqual`. It is still needed though as some props are hard to memoize from where they are called, or should simply be ignore.
I yanked out the parseURI part in a prior commit ... the comment was misleading me to think it was redundant. But it had another hidden function, which is to handle abandoned claims which `claim` will be `null`.
* apiCall: add option to not send the auth header
## Why
Want an option to make un-authenticated `resolve` calls where appropriate, to improve caching.
## How
All `apiCall`s are authenticated by default, but when clients add NO_AUTH to the params, `apiCall` will exclude the X_LBRY_AUTH_TOKEN. It will also strip NO_AUTH from the param object before sending it out.
* Add hook for 'resolve' and 'claim_search' to check and skip auth...
... if the params does not contain anything that requires the wallet.
* doResolveUri, doClaimSearch: let clients decide when to include_my_output
- No more hardcoding 'include_purchase_receipt' and 'include_is_my_output'
- doResolveUri: include these params when opening a file page. This was the only place that was doing that prior to this PR.
* is_my_output: use the signing_channel as alternative
## Notes
`is_my_output` is more expensive to resolve, so it is not being requested all the time.
## Change
Looking at the signing channel as the additional fallback, on top of `myClaimIds`.
## Aside
I think using `myClaimIds` here is redundant, as it is usually populated from `is_my_ouput`. But leaving as is for now...
## Why
- No memo required (no transformation).
- `makeSelect*` is an incorrect pattern.
## Changes
- Replaced makeSelectClientSetting with selectClientSetting.
- Remove unused selectShowRepostedContent.
## Issue
One of the bottlenecks of livestream page.
The component probably needs a re-design:
- Don't perpetually mount -- only mount when activated by the user through "@". This would avoid the heavy processing entirely.
- Better way of resolving uris (too many arrays, too many loops).
- Tom also mentioned that we should not be resolving every commenter as we see encounter them in a livestream. This is currently the case because the component is always mounted.
## Changes
Until the re-design occurs, attempt to cache the heavy processing. Also, trimmed down the amount of loops.
For the case of livestreams, the comments are added incrementally via websocket. The selector returns everything, which grows as a user watches the livestream.
We could even make it a bit more efficient by passing in `maxCount` to `filterComments`, and do a `for` loop there, but decided to keep things readable by not changing the `filter` usage.
- Memo not required. `resolvingUris` is very dynamic and is a short array anyways.
- Changeg from using `indexOf` to `includes`, which is more concise.
* Exclude default homepage data at compile time
The youtuber IDs alone is pretty huge, and is unused in the `CUSTOM_HOMEPAGE=true` configuration.
* Remove Desktop items and other cleanup
- Moved constants out of the component.
- Remove SIMPLE_SITE check.
- Remove Desktop-only items
* Sidebar: limit subscription and tag section
## Issue
Too slow for huge lists
## Change
Limit to 10 initially, and load everything on "Show more"
* Fix makeSelectThumbnailForUri
- Fix memo
- Expose function to extract directly from claim if client already have it.
## Issues with `makeSelectIsSubscribed`
- It will not return true if the uri provided is canonical, because the compared subscription uri is in permanent form. This was causing certain elements like the Heart to not appear in claim tiles.
- It is super slow for large subscriptions not just because of the array size + being a hot selector, but also because it is looking up the claim twice (not memo'd) and also calling `parseURI` to determine if it's a channel, which is unnecessary if you already have the claim.
## Changes
- Optimize the selector to only look up the claim once, and make operations using already-obtained info.
## Why
Frequently used; top in perf profile
## Changes
Most of the time, you already have the claim object in the current context. `selectClaimIsMineForUri` will retrieve the claim again, which is wasteful, even if it is memoized (looking up the cache still takes time).
Break apart the logic and added the alternative `selectClaimIsMine` for faster lookup.
* Publish button: use spinner instead of "Publishing..."
Looks better, plus the preview could take a while sometimes.
* Refactor `doPublish`. No functional change
This is to allow `doPublish` to accept a custom payload as an input (for resuming uploads), instead of always resolving it from the redux data.
* Add doPublishResume
* Support resume-able upload via tus
## Issue
38 Handle resumable file upload
## Notes
Since we can't serialize a File object, we'll need to the user to re-select the file to resume.
* Exclude "modified date" for Firefox/Android
## Issue
It appears that the modification date of the Android file changes when selected, so that file was deemed "different" when trying to resume upload.
## Change
Exclude modification date for now. Let's assume a smart user.
* Move 'currentUploads' to 'publish' reducer
`publish` is currently rehydrated, so we can ride on that and don't need to store the `currentUploads` in `localStorage` for persistence. This would allow us to store Markdown Post data too, as `localStorage` has a 5MB limit per app.
We could have also made `webReducer` rehydrate, but in this repo, there is no need to split it to another reducer. It also makes more sense to be part of publish anyway (at least to me).
This change is mostly moving items between files, with the exception of
1. An additional REHYDRATE in the publish reducer to clean up the tusUploader.
2. Not clearing `currentUploads` in CLEAR_PUBLISH.
* Restore v1 code for livestream replay, etc.
v2 (tus) does not handle `remote_url`, so the app still needs v1 for that. Since we'll still have v1 code, use v1 for previews as well.
- memo not required.
- start to not use the confusing and wrongly-named 'selectCommentsByUri' (per comment from Sean); use the existing 'selectClaimIdForUri' instead. This works because currently we do fetch any comments without first visiting a claim/uri, so we'll always have fetched the required claim, and can be queried in 'selectClaimIdForUri'.
## Issue
`normalizeUri` | `parseURI` is expensive and has been causing sluggish operations when called repeatedly or within a loop.
## Change
Since I'm not confident enough to remove the call entirely from makeSelectClaimIsMine (although I've yet to find a scenario that the uri is not already normalized), we'll try caching the calls instead.
## Results
- in a simple test of toggling between 2 category pages, we saved 20ms from `parseURI` calls alone.
- in a test of opening all categories one time, the memory usage remained similar. This makes sense since we removed a `makeSelect*` (which creates a selector for each call + not memoizing), and replaced that with a cached selector that's actually memoizing.
## Issue
- selectMyActiveClaims memo problem -- being recalculated on every click -- high workload for wallet with large uploads.
- Mistake in handling abandoning IDs (it was trying to extract keys from an array)
## Changes
- selectAbandoningIds: never use `state` as an input selector. Breaks memo.
- Don't use selectMyClaimsRaw and then reduce it back to IDs. Use selectMyClaimIdsRaw instead.
- selectAbandoningIds is already in array form, so don't run Object.keys.
- Fix abandoningById never clearing when succeeded.
* Don't update 'pendingById' if no changes.
'pendingById' isn't frequently updated, but using it as a proof-of-concept to fix how reducers should be written to avoid unnecessary updates.
ImmutableJS apparently does all of this for us, but there are cons to using it as well, so using own wrappers for now.
* Don't update 'byId' if no changes + add 'selectClaimWithId'
## Ticket
116 Claim store optimization ideas (reducing unnecessary renders)
## Changes
- Ignore things like `confirmations` so that already-fetched claims aren't invalidated and causes re-rendering. The `stringify` might look expensive, but the amount of avoided re-renders outweighs it. There might be faster ways to compare, though.
- With `byId[claimId]` references more stable now, memoized selectors can now use 'selectClaimWithId' to pick a specific claim to depend on, instead of 'byId' which changes on every update.
* Fix memo: selectMyChannelClaims, selectActiveChannelClaim
## Issue
These should never recalculate after `channel_list` has been fetched, but they do because of poor selector dependency.
## Change
With the `byId` changes from the previous commit, we are now able to memoize these selectors correctly.
- selectMyChannelClaims depends on `byId`, which currently is always invalidated per update, so it is not memoized.
- Most of the use-cases just needs the ID or the length of the array anyways, so avoid generating a Claim array (in selectMyChannelClaims) unnecessarily -- the client need to reduce it back down to IDs again :/
- The simpler boolean also removes the need to memoize the selector, which saves a bit of memory.
`selectMyActiveClaims` includes `byId`, which gets invalidated on each resolve. Having this as an input selector breaks memoization.
For the case of comment-filtering, we don't really care about pending or abandoned own claims (I think), so just grab the raw IDs.
* Prevent multiple parseURI calls
## Ticket
129
## Issue
Code was shortened to use `isURIValid` during the consolidation. `isURIValid` calls `normalizeURI`, which calls another `parseURI`.
`parseURI` is pretty expensive.
## Approach
- Add optional parameter to `isURIValid` to skip the normalization.
- Set those that were converted during the consolidation to skip the normalization. Also covered a few other instances where it is obvious to me that normalization is not required.
- For the rest, I can't tell for sure if it's safe to remove the normalization, so the default `normalize=true` will leave things as is.
The whole `parseURI` probably needs a refactoring, or a few lighter version for specific needs.
* Simplify isURIEqual
## Issue
`parseURI` is too expensive to be used in a loop, plus `normalizeURI` itself is calling `parseURI`.
## Approach
Not sure if it covers all cases, but just try convert colons to hashes before comparing.
## Issue
We previously automatically reload when there is a chunk error. This works fine if it's the case of new code was pushed recently while the user was active. But if the failure was caused by other things like network problems or the file IS actually missing, we end up in an infinite loop of refreshes.
## New approach
Tell the user to reload instead of automatically doing it.
followedTags:
- Moved the filtering to the reducer side, so that we don't do it every time. We can't rely on `createSelector` because the store will be invalidated on each `USER_STATE_POPULATE`, unfortunately.
tags:
- Memoize via re-reselect for the "ForUri" selector.
## Issue
`makeSelectDataForUri` always returns a new reference, so `ClaimPreview` was constantly being rendered. It's pretty expensive since `ClaimPreview`'s rendering checks against a huge blocklist, which is another issue on it's own.
## Changes
- This commit tests the usage of `re-reselect` as the solution to the multi-instance memoization problem (https://github.com/toomuchdesign/re-reselect/blob/master/examples/1-join-selectors.md)
## Issue
When comments are refreshed, each `Comment` gets rendered 4-5 times due to reference invalidation for `othersReacts` (the data didn't actually change).
## Change
For selectors without transformation, there is no need to memoize using `createSelector` -- just access it directly. Also, don't do things like `return a[id] || {}` in a reducer, because the reference to the empty object will be different on each call.
Always return directly from the state so that the same reference is returned.
This simple change avoided the wasted resources needed for `createSelector`, and reduced to render to just 2 (initial render, and when reactions are fetched).
## Issue
Components render unnecessarily due to reference invalidation from `selectMutedChannels` selector.
## Notes
`selectMutedChannels` run and return a new reference each time the app gains focus. `createSelector` will not help in this case, because we are indeed invalidating the data in the store in `USER_STATE_POPULATE`.
## Changes
- Don't update the state if the array is identical in content.
- Fixed `selectMutedChannels` to return the reference from the store, so `createSelector` is not needed.
- Also, the filtering is not needed because we've already done it in the reducer.
## Comments
I've done some profiling on large blocklists. The time needed for the array comparison is still an order magnitude lower than the time needed to render all the Components that got incorrectly marked by this.
The ideal solution is for the sync code to return a hash or timestamp of the array, so that we can compare that instead of the array.
I think this the best solution so far, at the expense of a slight delay in scrolling if the network call stalls.
- Added "fetching by ID" state so that we don't need to use the ugly N-retries method.
- `scrollIntoView` doesn't work if the element is already in the viewport, and the `scrollBy` adjustment doesn't take into account the y-position restoration that we perform on certain type of pages. Use `window.scrollTo` instead and taking into account current scroll position.
## Issue
.../archives/C02FQBM00Q0/p1633044695010600
## Changes
When querying a search key, it has to be an exact match. This was broken by the insertion of `free_only` in the fetch.
Added a function to generate the options, so that all clients stay in sync.
It was being recalculated repeatedly.
This memoizes it, although it still re-calculates occasionally despite none of the source arrays changed. I think it is due to the state change in the Preference Sync.
Note: input selectors to `createSelector` needs to be extractions-only (i.e. must not have transformations). I think most of our `makeSelect*` selectors violate this and broke memoization.
* ❌ Remove old method of displaying active livestreams
Completely remove it for now to make the commit deltas clearer.
We'll replace it with the new method at the end.
* Fetch and store active-livestream info in redux
* Tiles can now query active-livestream state from redux instead of getting from parent.
* ⏪ ClaimTilesDiscover: revert and cleanup
## Simplify
- Simplify to just `uris` instead of having multiple arrays (`uris`, `modifiedUris`, `prevUris`)
- The `prevUris` is for CLS prevention. With this removal, the CLS issue is back, but we'll handle it differently later.
- Temporarily disable the view-count fetching. Code is left there so that I don't forget.
## Fix
- `shouldPerformSearch` was never true when `prefixUris` is present. Corrected the logic.
- Aside: prefix and pin is so similar in function. Hm ....
* ClaimTilesDiscover: factor out options
## Change
Move the `option` code outside and passed in as a pre-calculated prop.
## Reason
To skip rendering while waiting for `claim_search`, we need to add `React.memo(areEqual)`. However, the flag that determines if we are fetching `claim_search` (fetchingClaimSearchByQuery[]) depends on the derived options as the key.
Instead of calculating `options` twice, we moved it to the props so both sides can use it.
It also makes the component a bit more readable.
The downside is that the prop-passing might not be clear.
* ClaimTilesDiscover: reduce ~17 renders at startup to just 2.
* ClaimTilesDiscover: fill with placeholder while waiting for claim_search
## Issue
Livestream claims are fetched seperately, so they might already exists. While claim_search is running, the list only consists of livestreams (collapsed).
## Fix
Fill up the space with placeholders to prevent layout shift.
* Add 'useFetchViewCount' to handle fetching from lists
This effect also stashes fetched uris, so that we won't re-fetch the same uris during the same instance (e.g. during infinite scroll).
* ⏪ ClaimListDiscover: revert and cleanup
## Revert
- Removed the 'finalUris' stuff that was meant to "pause" visual changes when fetching. I think it'll be cleaner to use React.memo to achieve that.
## Alterations
- Added `renderUri` to make it clear which array that this component will render.
- Re-do the way we fetch view counts now that 'finalUris' is gone. Not the best method, but at least correct for now.
* ClaimListDiscover: add prefixUris, similar to ClaimTilesDiscover
This will be initially used to append livestreams at the top.
* ✅ Re-enable active livestream tiles using the new method
* doFetchActiveLivestreams: add interval check
- Added a default minimum of 5 minutes between fetches. Clients can bypass this through `forceFetch` if needed.
* doFetchActiveLivestreams: add option check
We'll need to support different 'orderBy', so adding an "options check" when determining if we just made the same fetch.
* WildWest: limit livestream tiles + add ability to show more
Most likely this behavior will change in the future, so we'll leave `ClaimListDiscover` untouched and handle the logic at the page level.
This solution uses 2 `ClaimListDiscover` -- if the reduced livestream list is visible, it handles the header; else the normal list handles the header.
* Use better tile-count on larger screens.
Used the same method as how the homepage does it.
* Fix Floating Player stopping on certain files
* Dont show additional player buttons from markdown and comments
* Fix markdown resizing for the same video playing
* Update changelog
## Preamble
- The app-side uses a cached blocklist, so when a Timeout expires, it doesn't know that the ban has been lifted.
- Meanwhile, we are doing extra comment filtering using this blocklist (so that we don't see comments that we have blocked, regardless of whose claim we are viewing).
## Issue
In a livestream, if a new message from an ex-offender comes in after their ban has been lifted, we do get the websocket message but it's being filtered out locally as mentioned above. So, the msg ended up being visible for everyone except the owner.
## Fix (band aid)
- Don't run the extra filter if the claim we are viewing is ours -- commentron would have filtered it for us anyways, and is the right logic to use even before this Timeout feature is introduced.
- For the case of Timeout, this only serves as a band-aid until Commentron Issue 80 is available for us to detect the ban has been lifted. This is because it doesn't handle the case where I am a viewer and I decided to timeout someone for a few minutes. Because I am not the owner of the claim, the offender will continue to be blocked due to the same issue mentioned above.
* recsys wip
better logging
fix floating player popout playing uri bug with recsys
lint
add empty entries to create
use beacon; fire on visibilitychange
cleanup, not record recs if not seen
ifweb recsys beacon
recsys handle embeds, cleanup
use history.listen to trigger events
fix recsys embed bug
bugfix
more default data
cleaner
cleaner
* remove tentative
* disable recsys debug logging
* Dont show countdown on Lists
* Add Repeat icon
* Add Shuffle icon
* Add Replay Icon
* Add Replay Option to autoplayCountdown
* Add Loop Control for Lists
* Add Shuffle control for Lists
* Improve View List Link and Fetch action
* Add Play Button to List page
* Add Shuffle Play Option on List Page and Menus
* Fix Modal Remove Collection I18n
* CSS: Fix Large list titles
* Fix List playback on Floating Player
* Add Theater Mode to its own class and fix bar text display
* Add Play Next VJS component
* Add Play Next Button
* Add Play Previous VJS Component
* Add Play Previous Button
* Add Autoplay Next Button
* Add separate control for autoplay next in list
* Bump redux
* Update CHANGELOG.md
Previously, we decide when to display "Show More" based on the current fetched reply count vs. total replies in Commentron. It was already troublesome as `comment.List` and `comment.replies` give different values (one includes blocked content, while another does not).
Now, we are further filtering the list with Commentron blocklists (personal, admin, moderator), so it is not feasible to run the logic based on reply count.
## Solution
- Keep track of number of remaining pages instead and use that to determine when to display "Show More".
- While it doesn't solve the "Show N replies" mismatch (YT has this problem too), it prevents the button from lingering.
- In the event that all replies are blocked, just show an empty space (same as YT). I didn't like the previous version that cluttered the space with "comment(s) blocked".
## Issue
When you block Channel-X, Channel-X's comments will still be visible on someone else's content. This feels odd.
## Change
In addition to the blacklist, filter-list and muted-list, we now include the Commentron blocklists (personal, admin, moderator) when filtering out comments.
## Specifics
`makeSelectCommentsForUri`, `makeSelectTopLevelCommentsForUri` and `makeSelectRepliesForParentId` all perform the same filtering code. Factor that out to `makeSelectFilteredComments` and add the Commentron lists into the mix.
## Downsides
This probably adds to the already-high CPU usage in rendering comments.
