a357293 Use MakeUnique<Db>(...) (practicalswift)
3e09b39 Use MakeUnique<T>(...) instead of std::unique_ptr<T>(new T(...)) (practicalswift)
8617989 Add MakeUnique (substitute for C++14 std::make_unique) (practicalswift)
d223bc9 Use unique_ptr for pcoinscatcher/pcoinsdbview/pcoinsTip/pblocktree (practicalswift)
b45c597 Use unique_ptr for pdbCopy (Db) and fix potential memory leak (practicalswift)
29ab96d Use unique_ptr for dbenv (DbEnv) (practicalswift)
f72cbf9 Use unique_ptr for pfilter (CBloomFilter) (practicalswift)
8ccf1bb Use unique_ptr for sem{Addnode,Outbound} (CSemaphore) (practicalswift)
73db063 Use unique_ptr for upnp_thread (boost::thread) (practicalswift)
0024531 Use unique_ptr for dbw (CDBWrapper) (practicalswift)
fa6d122 Use unique_ptr:s for {fee,short,long}Stats (TxConfirmStats) (practicalswift)
5a6f768 Use unique_ptr for httpRPCTimerInterface (HTTPRPCTimerInterface) (practicalswift)
860e912 Use unique_ptr for pwalletMain (CWallet) (practicalswift)
Pull request description:
Use `std::unique_ptr` (C++11) where possible.
Rationale:
1. Avoid resource leaks (specifically: forgetting to `delete` an object created using `new`)
2. Avoid undefined behaviour (specifically: double `delete`:s)
**Note to reviewers:** Please let me know if I've missed any obvious `std::unique_ptr` candidates. Hopefully this PR should cover all the trivial cases.
Tree-SHA512: 9fbeb47b800ab8ff4e0be9f2a22ab63c23d5c613a0c6716d9183db8d22ddbbce592fb8384a8b7874bf7375c8161efb13ca2197ad6f24b75967148037f0f7b20c
5a5e4e9 [wallet] Remove CTransaction&() helper conversion operator from wallet implementation. (Karl-Johan Alm)
Pull request description:
The `CTransaction&()` operator in `CMerkleTx` makes conversion into `CTransaction`s transparent, but was marked as to-be-removed in favor of explicitly getting the `tx` ivar, presumably as the operator can lead to ambiguous behavior and makes the code harder to follow.
This PR removes the operator and adapts callers. This includes some cases of `static_cast<CTransaction>(wtx)` → `*wtx.tx`, which is definitely an improvement.
Tree-SHA512: 95856fec7194d6a79615ea1c322abfcd6bcedf6ffd0cfa89bbdd332ce13035fa52dd4b828d20df673072dde1be64b79c513529a6f422dd5f0961ce722a32d56a
b109a1c Remove redundant nullptr checks before deallocation (practicalswift)
Pull request description:
Rationale:
* `delete ptr` is a no-op if `ptr` is `nullptr`
Tree-SHA512: c98ce769125c4912186a8403cc08a59cfba85b7141af645c709b4c4eb90dd9cbdd6ed8076d50099d1e4ec2bf75917d1af6844082ec42bbb4d94d229a710e051c
ff35de8 [ui] Add toggle for unblinding password fields (Thomas Snider)
Pull request description:
Proposed change for adding the ability to toggle password visibility in the password dialog. This is similar to functionality in most password managers and is specifically added with the use case of password managers in mind - the password in that case is likely pasted twice into both the new password and confirm password fields.
If this is a welcome change, I am open to suggestions on rearranging the layout.
Tree-SHA512: 1823f356f8f941cc584c44de264433e9a573cb8a358efa300a412c4458b5564d8d193969be40859195cf9c8d6768eee895ee22440d51db4f09175f9b4e28bced
6b1891e2c Add Sent and Received information to the debug menu peer list (Aaron Golliver)
8e4aa35ff move human-readable byte formatting to guiutil (Aaron Golliver)
Pull request description:
Makes the peer list display how much you've uploaded/downloaded from each peer.
Here's a screenshot ~~[outdated](https://i.imgur.com/MhPbItp.png)~~, [current](https://i.imgur.com/K1htrVv.png) of how it looks. You can now sort to see who are the peers you've uploaded the most too.
I also moved `RPCConsole::FormatBytes` to `guiutil::formatBytes` so I could use it in the peerlist
Tree-SHA512: 8845ef406e4cbe7f981879a78c063542ce90f50f45c8fa3514ba3e6e1164b4c70bb2093c4e1cac268aef0328b7b63545bc1dfa435c227f28fdb4cb0a596800f5
7a91ceb5e [QA] Add RPC based rescan test (Jonas Schnelli)
c77170fbd [Wallet] add rescanblockchain <start_height> <stop_height> RPC command (Jonas Schnelli)
Pull request description:
A RPC rescan command is much more flexible for the following reasons:
* You can define the start and end-height
* It can be called during runtime
* It can work in multiwallet environment
Tree-SHA512: df67177bad6ad1d08e5a621f095564524fa3eb87204c2048ef7265e77013e4b1b29f991708f807002329a507a254f35e79a4ed28a2d18d4b3da7a75d57ce0ea5
55509f1 Document assumptions that are being made to avoid division by zero (practicalswift)
Pull request description:
Document assumptions (via `assert(…)`:s) that are being made to avoid division by zero.
Rationale:
* Make it clear to human reviewers and non-human static analyzers that what might look like potential division by zero cases are written the way they are intentionally (these cases are currently flagged by various static analyzers).
Tree-SHA512: bbb67b1370afd8f39bda35f9e3a20f4325f017d94cc1bfac3b0d36c9f34c2d95a9efe11efe44db29fb4aadd25d8276d8f0e03c8806ac64f0d21d821912e13b8e
If addrProxy or addrSeparateProxyTor do not have a colon in the string
somewhere in the QSettings storage, then attempting to open the options
dialog will cause the entire program to crash.
634e38ca7 [Tests] Add Qt GUI tests to Overview and ReceiveCoin Page (Anditto Heristyo)
Pull request description:
I've added some Qt wallet tests based on #9974, namely the input & buttons on ReceiveCoin.
Tree-SHA512: f4223827145e35c2abee83a6ca777498bebcff3825fece10fbb1dbfd1f6bb017d3f2c0521662854b4407cdeee9c6a527269ab9cc28e0dc85c11b668155fcd195
3a4401a [Qt] Terminate string *pszExePath after readlink and without using memset (practicalswift)
Pull request description:
Terminate string `*pszExePath` after `readlink` and before passing to operator `<<`.
* `ssize_t readlink(const char *pathname, char *buf, size_t bufsiz)` does not append a null byte to `buf`.
* Operator `<<` expects a null-terminated string.
Tree-SHA512: fc18844bb23059fead8db0cb9b4b4ba6188f58e3f19ab4719c2737cc5dd6df23ae7d4804ef2820d39b334204a48ee3de1d202c272bcd156e60761af2fcb9349d
8213838 [Qt] tolerate BIP173/bech32 addresses during input validation (Jonas Schnelli)
06eaca6 [RPC] Wallet: test importing of native witness scripts (NicolasDorier)
fd0041a Use BIP173 addresses in segwit.py test (Pieter Wuille)
e278f12 Support BIP173 in addwitnessaddress (Pieter Wuille)
c091b99 Implement BIP173 addresses and tests (Pieter Wuille)
bd355b8 Add regtest testing to base58_tests (Pieter Wuille)
6565c55 Convert base58_tests from type/payload to scriptPubKey comparison (Pieter Wuille)
8fd2267 Import Bech32 C++ reference code & tests (Pieter Wuille)
1e46ebd Implement {Encode,Decode}Destination without CBitcoinAddress (Pieter Wuille)
Pull request description:
Builds on top of #11117.
This adds support for:
* Creating BIP173 addresses for testing (through `addwitnessaddress`, though by default it still produces P2SH versions)
* Sending to BIP173 addresses (including non-v0 ones)
* Analysing BIP173 addresses (through `validateaddress`)
It includes a reformatted version of the [C++ Bech32 reference code](https://github.com/sipa/bech32/tree/master/ref/c%2B%2B) and an independent implementation of the address encoding/decoding logic (integrated with CTxDestination). All BIP173 test vectors are included.
Not included (and intended for other PRs):
* Full wallet support for SegWit (which would include automatically adding witness scripts to the wallet during automatic keypool topup, SegWit change outputs, ...) [see #11403]
* Splitting base58.cpp and tests/base58_tests.cpp up into base58-specific code, and "address encoding"-code [see #11372]
* Error locating in UI for BIP173 addresses.
Tree-SHA512: 238031185fd07f3ac873c586043970cc2db91bf7735c3c168cb33a3db39a7bda81d4891b649685bb17ef90dc63af0328e7705d8cd3e8dafd6c4d3c08fb230341
This eases the during-type validation to allow Bech32 chars.
Once the focus has been lost, the address will be properly verified through IsValidDestinationString
7b137aced [Qt] Add delay before filtering transactions Fixes 3141 (Lucas Betschart)
Pull request description:
As discussed in https://github.com/bitcoin/bitcoin/issues/3141.
This adds a QTimer pause of 200ms before start to filter so it should be possible to filter big data sets easier.
Tree-SHA512: ee599367794eac2c5b8bc7ecac47f44295e40c0ff543ff2f2c4860590f917b59b1cfb273fa564e6eb4c44016c0ef412d49f1a8f1b36b07e034022f51bb76653c
13baf72 Replace save|restoreWindowGeometry with Qt functions (MeshCollider)
Pull request description:
Alternative to https://github.com/bitcoin/bitcoin/pull/11208, closes https://github.com/bitcoin/bitcoin/issues/11207
According to the [Qt documentation](https://doc.qt.io/qt-4.8/qwidget.html#restoreGeometry), restoreGeometry does all the checks we need, so it would be better to rely on them instead of doing it ourselves.
~Haven't tested this properly yet, hence the WIP.~
Gives expected behavior exactly as the other system apps do based on my tests. Only potential issue is the case when the GUI is almost entirely offscreen with only a single strip of pixels, its not really possible to see the GUI, but if you know it's there you can bring it back onscreen with just the mouse. And that's exactly how notepad behaves on Windows so I don't think its a real issue.
This also gives much better behavior when closing a maximized window, currently (0.15.0 release) a maximized window will save the window size on close, and then reopen as a not-maximized but still that size, which is really annoying. This reopens as maximized.
Gitian build here: https://bitcoin.jonasschnelli.ch/build/305
Tree-SHA512: a8bde14793b4316192df1fa2eaaeb32b44d5ebc5219c35252379840056cd737a9fd162625fd715987f275fec8375334ec1ec328dbc671563f084c611a938985c
723aa1b qt: Backup former GUI settings on `-resetguisettings` (Wladimir J. van der Laan)
Pull request description:
Writes the GUI settings to `guisettings.bak` in the data directory before wiping them. This can be used to retroactively troubleshoot issues (e.g. #11262) where `-resetguisettings` solves the problem.
(as discussed in yesterday's IRC meeting)
Tree-SHA512: c64f5052d992eb02057ba285435f143c42d0cc456144a4c565e1c87be833737f9df750d0aee10810f85047c820d9b4f9f22fd94a6f09f4b28a9cf41b63a56586
Writes the GUI settings to `guisettings.bak` in the data directory
before wiping them. This can be used to retroactively troubleshoot
issues (e.g. #11262) where `-resetguisettings` solves the problem.
A C-style cast is equivalent to try casting in the following order:
1. const_cast(...)
2. static_cast(...)
3. const_cast(static_cast(...))
4. reinterpret_cast(...)
5. const_cast(reinterpret_cast(...))
By using static_cast<T>(...) explicitly we avoid the possibility
of an unintentional and dangerous reinterpret_cast. Furthermore
static_cast<T>(...) allows for easier grepping of casts.
fdc3293 Document assumptions that are being made to avoid NULL pointer dereferences (practicalswift)
Pull request description:
Document assumptions (via `assert(…)`:s) that are being made avoid `NULL` pointer dereferences.
Rationale:
* Make it clear to human reviewers and non-human static analyzers that what might look like potential `NULL` pointer dereferences are written the way they are intentionally (these cases are currently flagged by various static analyzers).
Tree-SHA512: b424328195e2680e1e4ec546298f718c49e5ad182147dc004de580693db1b50eec4065e1c4f232bdb302baa12954265a50ba21cb5ba4ff30248535b2de778672
f151f5f50 [macOS] remove Growl support, remove unused code (Jonas Schnelli)
Pull request description:
There is no longer a reason to support Growl.
A) It went to pay-ware since a couple of years
B) Since OSX 10.8, the operating system has its own modal notification options (Notification Center).
This PR removes support for Growl.
OSX notification centre is still supported after this PR.
Tree-SHA512: eee18098d7354c4e98f927bca9963d4843ff6bceee74795f73a66c27eed33efaac00ec2cabde8807efcbc936b16ab712249006fa13f5a3f55e4d44d163f5f9a0
592404f03 Changing &vec[0] to vec.data(), what 9804 missed (MeshCollider)
Pull request description:
This just continues the work of https://github.com/bitcoin/bitcoin/pull/9804
Modifies a lot of `&vector[]`'s to `vector.data()`'s across all the files including tests, just the stuff that 9804 missed
Tree-SHA512: dd1a9dffb999dea4fba78dcc91fe02f90250db86f5c74948e1ff3e8b4036b2154b600555eaa04dece5368920aae3513bc36425dc96e4319ca1041b0928a6b656
c8d38abd6 Refactor tipUpdate as per style guide (MeshCollider)
3b69a08c5 Fix division by zero in time remaining (MeshCollider)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/10291, https://github.com/bitcoin/bitcoin/issues/11265
progressDelta may be 0 (or even negative according to 11265), this checks for that and prints unknown if it is, because we cannot calculate an estimate for the time remaining (would be infinite or negative).
Tree-SHA512: bc5708e5ed6e4670d008219558c5fbb25709bd99a32c98ec39bb74f94a0b7fa058f3d03389ccdd39e6723e6b5b48e34b13ceee7c051c2db631e51d8ec3e1d68c
9b348ff9e Fix memory leaks in qt/guiutil.cpp (Dan Raviv)
Pull request description:
on macOS:
`listSnapshot` was leaking in `findStartupItemInList()`
`bitcoinAppUrl` was leaking in `[Get|Set]StartOnSystemStartup()`
Tree-SHA512: dd49e1166336cf4f20035d21930f2f99f21f1d9f91a1101b1434a23dd0b92d402ac7efb177473c758d8af1dbab8d8750485583231c5b5854203d2493f0b43e73
ee4d1493e Drop upgrade-cancel callback registration for a generic "resumeable" (Matt Corallo)
Pull request description:
Instead of passing a StartShutdown reference all the way up from
txdb, give ShowProgress a "cancelable" boolean, as StartShutdown
is pretty much always what you'll want to use to cancel. Use the
same boolean to allow cancel during initial block verification.
Tree-SHA512: 515817aaa4b9e3e856200e00be9c2d44ecfa2d4f288fe3e02116105fe85de2650c13076ee7e45396ec1ce6ab45e53b0477cddda7cfdee5b3bd0589cb81a4c346
d2be7b25b Typo in optionsdialog.ui Tooltip displayed ampersand incorrectly, & should be in text. (James Evans)
Pull request description:
Tooltip displayed ampersand incorrectly, & should be in text property rather than tooltip so that access key is correctly displayed for accessibility.
Tree-SHA512: 331848207317d37d4d9db40119d0b7ae9a276d06cd1b057cd0e87d508e1aa769b785246ca30ca9156db632798ec9f68ba8bf78cf42904267b4187bd27cfced35
864cd2787 Move CBitcoinAddress to base58.cpp (Pieter Wuille)
5c8ff0d44 Introduce wrappers around CBitcoinAddress (Pieter Wuille)
Pull request description:
This patch removes the need for the intermediary Base58 type `CBitcoinAddress`, by providing {`Encode`,`Decode`,`IsValid`}`Destination` functions that directly operate on the conversion between `std::string`s and `CTxDestination`.
As a side, it also fixes a number of indentation issues, and removes probably several unnecessary implicit `CTxDestination`<->`CBitcoinAddress` conversions.
This change is far from complete. In follow-ups I'd like to:
* Split off the specific address and key encoding logic from base58.h, and move it to a address.h or so.
* Replace `CTxDestination` with a non-`boost::variant` version (which can be more efficient as `boost::variant` allocates everything on the heap, and remove the need for `boost::get<...>` and `IsValidDestination` calls everywhere).
* Do the same for `CBitcoinSecret`, `CBitcoinExtKey`, and `CBitcoinExtPubKey`.
However, I've tried to keep this patch to be minimally invasive, but still enough to support non-Base58 addresses. Perhaps a smaller patch is possible to hack Bech32 support into `CBitcoinAddress`, but I would consider that a move in the wrong direction.
Tree-SHA512: c2c77ffb57caeadf2429b1c2562ce60e8c7be8aa9f8e51b591f354b6b441162625b2efe14c023a1ae485cf2ed417263afa35c892891dfaa7844e7fbabccab85e
This patch removes the need for the intermediary Base58 type
CBitcoinAddress, by providing {Encode,Decode,IsValid}Destination
function that directly operate on the conversion between strings
and CTxDestination.
dea086f49 Stop test_bitcoin-qt touching ~/.bitcoin (MeshCollider)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/11192
The directory remains unused, but this stops the tests touching ~/.bitcoin at all (namely creating it if it doesn't exist)
Tree-SHA512: e59ad6b83dbc5ea2fb2761994c09933721d29668b0eef09b9d938a4ee1c67871c5125c57483ee0ea25f2385e308d275d86bcb9087dd4d502923013b4f3dbac82
a1ea1cfbd qt: Use IsMine to validate custom change address (Chris Moore)
Pull request description:
Fixes#11137Closes#11184 (which was accidentally opened against 0.15 branch)
Tree-SHA512: a20a59b4f36c1471a9c84bcc7c69048576d1f413104c299a7ed9ba221f28eddf93d727fca2926420ea5d0dd9aba582924f26a5acd44d995039b7202c73eb53bc
d1138e362 Remove redundant testutil files (MeshCollider)
Pull request description:
The only function in testutil.cpp, `GetTempPath()` simply called `fs::temp_directory_path()` directly. This just tidies things up by removing that redundant function and the file containing it
I can understand wanting a general util file for tests to use, but if there's nothing in it, we might as well remove it, it can always be added back later when it's put to use.
Tree-SHA512: b923f99acf33328743755368a1aa90f5da4a7d5f61b163a4b0b894275c98db80a91edf8f051fbfb4893d970fda5a9078aae78a2672867ff521c4ca4b653c71c0
ec6902d0e rpc: Push down safe mode checks (Andrew Chow)
Pull request description:
This contains most of the changes of #10563 "remove safe mode" by @achow101, but doesn't remove the safe mode yet, but put an `ObserveSafeMode()` check in (all 23) individual calls which used to have okSafeMode=false.
This cleans up the ugly "okSafeMode" flag from the dispatch tables, which is not a concern for the RPC server.
Extra-author: Wladimir J. van der Laan <laanwj@gmail.com>
Tree-SHA512: eee0f251fe2f38f122e7391e3c4e98d6a1e2757f3b718d6b560ad835ae94f11490865a0aef893e90b5fe298165932c8dd8298224173ac2677a5245cd532bac6e
This contains most of the changes of 10563 "remove safe mode", but doesn't
remove the safe mode yet, but put an `ObserveSafeMode()` check in
individual calls with okSafeMode=false.
This cleans up the ugly "okSafeMode" flag from the dispatch tables,
which is not a concern for the RPC server.
Extra-author: Wladimir J. van der Laan <laanwj@gmail.com>
f01103c MOVEONLY: Init functions wallet/wallet.cpp -> wallet/init.cpp (Russell Yanofsky)
e7fe320 MOVEONLY: Fee functions wallet/wallet.cpp -> wallet/fees.cpp (Russell Yanofsky)
d97fe20 Move some static functions out of wallet.h/cpp (Russell Yanofsky)
Pull request description:
This just moves some static wallet fee and init functions out of `wallet/wallet.cpp` and into new `wallet/fees.cpp` and `wallet/init.cpp` source files. There is one commit updating declarations and callers, followed by two MOVEONLY commits actually moving the function bodies.
This change is desirable because wallet.h/cpp are monolithic and hard to navigate, so pulling things out and grouping together pieces of related functionality should improve the organization.
Another motivation is the wallet process separation work in https://github.com/bitcoin/bitcoin/pull/10973, where (at least initially) parameter parsing and fee estimation are still done in the main process rather than the wallet process, and having functions that run in different processes scrambled up throughout wallet.cpp is unnecessarily confusing.
Tree-SHA512: 6e6982ff82b2ab4e681c043907e2b1801ceb9513394730070f16c46ad338278a863f5b3759aa13db76a259b268b1c919c81f4e339f0796a3cfb990161e8c316d
Instead of passing a StartShutdown reference all the way up from
txdb, give ShowProgress a "resumeable" boolean, which is used to
inform the user if the action will be resumed, but cancel is always
allowed by just calling StartShutdown().
8f2f1e0 wallet: Avoid second mapWallet lookup (João Barbosa)
Pull request description:
All calls to `mapWallet.count()` have the intent to detect if a `txid` exists and most are followed by a second lookup to retrieve the `CWalletTx`.
This PR replaces all `mapWallet.count()` calls with `mapWallet.find()` to avoid the second lookup.
Tree-SHA512: 96b7de7f5520ebf789a1aec1949a4e9c74e13683869cee012f717e5be8e51097d068e2347a36e89097c9a89f1ed1a1529db71760dac9b572e36a3e9ac1155f29
6e8c48dc5 Add const to methods that do not modify the object for which it is called (practicalswift)
Pull request description:
Tree-SHA512: a6888111ba16fb796e320e60806e1a77d36f545989b5405dc7319992291800109eab0b8e8c286b784778f41f1ff5289e7cb6b4afd7aec77f385fbcafc02cffc1
f42fc1d50 doc: spelling fixes (klemens)
Pull request description:
patch contains some spelling fixes ( just in comments ) as found by a bot ( http://www.misfix.org, https://github.com/ka7/misspell_fixer ).
Tree-SHA512: ba6046cfcd81b0783420daae7d776be92dd7b85a593e212f8f1b4403aca9b1b6af12cef7080d4ea5ed4a14952fd25e4300109a59c414e08f5395cdb9947bb750
This commit just moves a few function declarations and updates callers.
Function bodies are moved in two followup MOVEONLY commits.
This change is desirable because wallet.h/cpp are monolithic and hard to
navigate, so pulling things out and grouping together pieces of related
functionality should improve the organization.
Another proximate motivation is the wallet process separation work in
https://github.com/bitcoin/bitcoin/pull/10973, where (at least initially)
parameter parsing and fee estimation are still done in the main process rather
than the wallet process, and having functions that run in different processes
scrambled up throughout wallet.cpp is unnecessarily confusing.
90d4d89 scripted-diff: Use the C++11 keyword nullptr to denote the pointer literal instead of the macro NULL (practicalswift)
Pull request description:
Since C++11 the macro `NULL` may be:
* an integer literal with value zero, or
* a prvalue of type `std::nullptr_t`
By using the C++11 keyword `nullptr` we are guaranteed a prvalue of type `std::nullptr_t`.
For a more thorough discussion, see "A name for the null pointer: nullptr" (Sutter &
Stroustrup), http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2431.pdf
With this patch applied there are no `NULL` macro usages left in the repo:
```
$ git grep NULL -- "*.cpp" "*.h" | egrep -v '(/univalue/|/secp256k1/|/leveldb/|_NULL|NULLDUMMY|torcontrol.*NULL|NULL cert)' | wc -l
0
```
The road towards `nullptr` (C++11) is split into two PRs:
* `NULL` → `nullptr` is handled in PR #10483 (scripted, this PR)
* `0` → `nullptr` is handled in PR #10645 (manual)
Tree-SHA512: 3c395d66f2ad724a8e6fed74b93634de8bfc0c0eafac94e64e5194c939499fefd6e68f047de3083ad0b4eff37df9a8a3a76349aa17d55eabbd8e0412f140a297
- Increase `BLOCK_CHAIN_SIZE` from 120GB to 150GB
- Increase `CHAIN_STATE_SIZE` from 2GB to 4GB
I took the local sizes of the blocks and chainstate directory, and added
a bit extra to accomodate the near future (15GB for the chain and 1GB
for the chainstate).
0be03c7 Qt: Use _putenv_s instead of setenv on Windows builds (Brian McMichael)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/10836
Error message I would get on `make`:
```
...
CXXLD bench/bench_bitcoin.exe
OBJCXXLD qt/bitcoin-qt.exe
qt/test/test_main.cpp: In function ‘int main(int, char**)’:
qt/test/test_main.cpp:64:43: error: ‘setenv’ was not declared in this scope
setenv("QT_QPA_PLATFORM", "minimal", 0);
^
make[2]: *** [qt/test/qt_test_test_bitcoin_qt-test_main.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[2]: Leaving directory `/home/bmcmichael/Projects/bcoin/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/bmcmichael/Projects/bcoin/src'
make: *** [all-recursive] Error 1
```
`setenv` function is not available from the Microsoft runtime library. Need to use `_putenv_s` instead.
This solution tells the compiler to use `_putenv_s` on `WIN32` compilation (Note: this also works on 64-bit Windows instances.) and `setenv` everywhere else.
I've tested builds on Windows 10 x64 and Ubuntu 16.04 with this code.
Tree-SHA512: d53c996c890e3c6f22b4f2dcca718bef9168f19a6d4a29b8ff13391bfc0c8ea9c1cd16782b47c25b156dcbdff18bb19e23bfd5f6fefb1f373c9d5454a13fc969
9737572 [Qt] Use wallet 0 in rpc console if running with multiple wallets (Jonas Schnelli)
Pull request description:
Current master with multiwallet results in accessing wallet 0 in QT (send / receive / tx history / etc.), **but** the RPC console cannot access that wallet (only non-wallet commands work).
This is a quick solution to re-allow accessing the same wallet (Index 0) via RPC console in multiwallet.
The solutions design is not "state of the art" (should go over WalletModel). Ideally we work on an overall multiwallet support for the GUI (which then would remove this change).
I think we should consider this as a bugfix.
Tree-SHA512: 16cf844662248ffd3d82c7d0cbe5879f231fbc7d4f5a4aab4180a9087018519c98301e4ac311eaec2cc39dddf25d3edf9be99a6622ea682c138a820a9b21fd0c
dba485d init: Factor out AppInitLockDataDirectory (Wladimir J. van der Laan)
Pull request description:
Alternative to #10818, alternative solution to #10815.
After this change: All the AppInit steps before and inclusive AppInitLockDataDirectory must not have Shutdown() called in case of failure. Only when AppInitMain fails, Shutdown should be called.
Changes the GUI and bitcoind code to consistently do this.
Tree-SHA512: 393e1a0ae05eb8e791025069e3ac4f6f3cdeb459ec63feda85d01cf6696ab3fed7632b6a0ac3641b8c7015af51d46756b5bba77f5e5f0c446f0c2dea58bbc92e
Alternative to #10818, alternative solution to #10815.
After this change: All the AppInit steps before and inclusive
AppInitLockDataDirectory must not have Shutdown() called in case of
failure. Only when AppInitMain fails, Shutdown should be called.
Changes the GUI and bitcoind code to consistently do this.
Remove helper function (CalculateEstimateType) for determining whether
estimates should be conservative or not, now that this is only called
once from GetMinimumFee and incorporate the logic directly there.
This fixes buggy behavior where we were temporarily setting and unsetting the
global payTxFee when trying to send a transaction with a custom fee from the
GUI. The previous behavior was inconsistent depending on the order of using the
RPC call settxfee and clicking various radio buttons in the sendcoinsdialog.
The new behavior is that transactions sent with the GUI will always use either
the smartfee slider value or the custom fee set on the GUI and they will not
affect the global defaults which are only for RPC and initial GUI values.
2aef1f182 [Qt] migrate old fee slider value to new dropbown Always round up (conservative) (Jonas Schnelli)
bc1be90e3 [Qt] replace fee slider with a Dropdown, extend conf. targets (Jonas Schnelli)
Tree-SHA512: 53796cf0b434dd3db5d4680dbeb6231a7df8f15d88187178fd4db8917cd7fc60091ce2c1589fd93668fc94bb13f989aba5b7ef3792fa95ee1f9f21a15709e2d3
1f668b6 Expose if CScheduler is being serviced, assert its not in EmptyQueue (Matt Corallo)
3192975 Flush CValidationInterface callbacks prior to destruction (Matt Corallo)
08096bb Support more than one CScheduler thread for serial clients (Matt Corallo)
2fbf2db Add default arg to CScheduler to schedule() a callback now (Matt Corallo)
cda1429 Give CMainSignals a reference to the global scheduler (Matt Corallo)
3a19fed Make ValidationInterface signals-type-agnostic (Matt Corallo)
ff6a834 Use TestingSetup to DRY qt rpcnestedtests (Matt Corallo)
Tree-SHA512: fab91e34e30b080ed4d0a6d8c1214910e383c45440676e37be61d0bde6ae98d61e8903d22b846e95ba4e73a6ce788798350266feba246d8a2ab357e8523e4ac5
Add support for setting each of these attributes on a per RPC call basis to sendtoaddress, sendmany, fundrawtransaction (already had RBF), and bumpfee (already had RBF and conf target).
GetMinimumFee now passes the conservative argument into estimateSmartFee.
Call CalculateEstimateType(mode) before calling GetMinimumFee or estimateSmartFee to determine the value of this argument.
CCoinControl can now be used to control this mode.
542ce6e Report [CANCELLED] instead of [DONE] when shut down during txdb upgrade (Jonas Schnelli)
83fbea3 Report txdb upgrade not more often then every 10% (Jonas Schnelli)
06c5b6e Show txdb upgrade progress in debug log (Jonas Schnelli)
316fcb5 Allow to cancel the txdb upgrade via splashscreen callback (Jonas Schnelli)
ae09d45 Allow to shut down during txdb upgrade (Jonas Schnelli)
00cb69b [Qt] allow to execute a callback during splashscreen progress (Jonas Schnelli)
Tree-SHA512: 23190f23f441bfd60821e49f8b3698a6bef97eb0e0ee659328e4a7395769ecd1616420eacc38aa1fa0ff62b9de5f13a0098dc798cdec6bff649575cefebc0db2
6171826 Don't create change at the dust limit, even if it means paying more than expected (Alex Morcos)
Tree-SHA512: d4cf939b97a92d63d4703ad152093c9dc60e74af590697bc21adbcdf17fc9e6ffb37d46d5eefafbd69327d1bcb79911f1b826ce1d960d895d464c4408c4995c3
A few "a->an" and "an->a".
"Shows, if the supplied default SOCKS5 proxy" -> "Shows if the supplied default SOCKS5 proxy". Change made on 3 occurrences.
"without fully understanding the ramification of a command" -> "without fully understanding the ramifications of a command".
Removed duplicate words such as "the the".
e9cd778 Pass in smart fee slider value to coin control dialog (Alex Morcos)
Tree-SHA512: 3899c3eb89b06e9cc842b33fabcce40a84fcc3a88ac2b02861f63419925312ac2a9f632567c02b0a060f5c5cd55f337e35e99b80535d1c1b8fcb7fd0c539f3c0
Since cfe77ef41 the global nTxConfirmTarget wasn't being updated by the smart
fee slider and thus the coin control dialog and labels were not being updated.
Use case: TryCreateDirectory(GetDataDir() / "blocks" / "index") would
fail if the blocks directory was not explicitly created before.
The line that did so was in a weird location and could be removed as a
result.
c237bd7 wallet: Update formatting (Luke Dashjr)
9cbe8c8 wallet: Forbid -salvagewallet, -zapwallettxes, and -upgradewallet with multiple wallets (Luke Dashjr)
a2a5f3f wallet: Base backup filenames on original wallet filename (Luke Dashjr)
b823a4c wallet: Include actual backup filename in recovery warning message (Luke Dashjr)
84dcb45 Bugfix: wallet: Fix warningStr, errorStr argument order (Luke Dashjr)
008c360 Wallet: Move multiwallet sanity checks to CWallet::Verify, and do other checks on all wallets (Luke Dashjr)
0f08575 Wallet: Support loading multiple wallets if -wallet used more than once (Luke Dashjr)
b124cf0 Wallet: Replace pwalletMain with a vector of wallet pointers (Luke Dashjr)
19b3648 CWalletDB: Store the update counter per wallet (Luke Dashjr)
74e8738 Bugfix: ForceSetArg should replace entr(ies) in mapMultiArgs, not append (Luke Dashjr)
23fb9ad wallet: Move nAccountingEntryNumber from static/global to CWallet (Luke Dashjr)
9d15d55 Bugfix: wallet: Increment "update counter" when modifying account stuff (Luke Dashjr)
f28eb80 Bugfix: wallet: Increment "update counter" only after actually making the applicable db changes to avoid potential races (Luke Dashjr)
Tree-SHA512: 23f5dda58477307bc07997010740f1dc729164cdddefd2f9a2c9c7a877111eb1516d3e2ad4f9b104621f0b7f17369c69fcef13d28b85cb6c01d35f09a8845f23
8906a9a0d Fix bumpfee test after #10449 (Russell Yanofsky)
Tree-SHA512: 0838c7696499baf0fb5ee6edf0b081752d6c37578360a7f24a7e9c700598cbc14ff95826f2f5124cca805d2609470a052bc7309211874b13be7ac1ff9e911a34
589827975 scripted-diff: various renames for per-utxo consistency (Pieter Wuille)
a5e02bc7f Increase travis unit test timeout (Pieter Wuille)
73de2c1ff Rename CCoinsCacheEntry::coins to coin (Pieter Wuille)
119e552f7 Merge CCoinsViewCache's GetOutputFor and AccessCoin (Pieter Wuille)
580b02309 [MOVEONLY] Move old CCoins class to txdb.cpp (Pieter Wuille)
8b25d2c0c Upgrade from per-tx database to per-txout (Pieter Wuille)
b2af357f3 Reduce reserved memory space for flushing (Pieter Wuille)
41aa5b79a Pack Coin more tightly (Pieter Wuille)
97072d668 Remove unused CCoins methods (Pieter Wuille)
ce23efaa5 Extend coins_tests (Pieter Wuille)
508307968 Switch CCoinsView and chainstate db from per-txid to per-txout (Pieter Wuille)
4ec0d9e79 Refactor GetUTXOStats in preparation for per-COutPoint iteration (Pieter Wuille)
13870b56f Replace CCoins-based CTxMemPool::pruneSpent with isSpent (Pieter Wuille)
05293f3cb Remove ModifyCoins/ModifyNewCoins (Pieter Wuille)
961e48397 Switch tests from ModifyCoins to AddCoin/SpendCoin (Pieter Wuille)
8b3868c1b Switch CScriptCheck to use Coin instead of CCoins (Pieter Wuille)
c87b957a3 Only pass things committed to by tx's witness hash to CScriptCheck (Matt Corallo)
f68cdfe92 Switch from per-tx to per-txout CCoinsViewCache methods in some places (Pieter Wuille)
000391132 Introduce new per-txout CCoinsViewCache functions (Pieter Wuille)
bd83111a0 Optimization: Coin&& to ApplyTxInUndo (Pieter Wuille)
cb2c7fdac Replace CTxInUndo with Coin (Pieter Wuille)
422634e2f Introduce Coin, a single unspent output (Pieter Wuille)
7d991b55d Store/allow tx metadata in all undo records (Pieter Wuille)
c3aa0c119 Report on-disk size in gettxoutsetinfo (Pieter Wuille)
d34242430 Remove/ignore tx version in utxo and undo (Pieter Wuille)
7e0032290 Add specialization of SipHash for 256 + 32 bit data (Pieter Wuille)
e484652fc Introduce CHashVerifier to hash read data (Pieter Wuille)
f54580e7e error() in disconnect for disk corruption, not inconsistency (Pieter Wuille)
e66dbde6d Add SizeEstimate to CDBBatch (Pieter Wuille)
Tree-SHA512: ce1fb1e40c77d38915cd02189fab7a8b125c7f44d425c85579d872c3bede3a437760997907c99d7b3017ced1c2de54b2ac7223d99d83a6658fe5ef61edef1de3
This patch makes several related changes:
* Changes the CCoinsView virtual methods (GetCoins, HaveCoins, ...)
to be COutPoint/Coin-based rather than txid/CCoins-based.
* Changes the chainstate db to a new incompatible format that is also
COutPoint/Coin based.
* Implements reconstruction code for hash_serialized_2.
* Adapts the coins_tests unit tests (thanks to Russell Yanofsky).
A side effect of the new CCoinsView model is that we can no longer
use the (unreliable) test for transaction outputs in the UTXO set
to determine whether we already have a particular transaction.
6d7104c99 [Qt] make sure transaction table entry gets updated after bump (Jonas Schnelli)
32325a3f5 [Qt] hide bump context menu action if tx already has been bumped (Jonas Schnelli)
Tree-SHA512: d3e5991145879b7f6b212d9d9c6f423609dc8e6fa7f6feb7df931691f1dec2acb6ab162c2fb7e758d3ca3f3fb14363df2f50f0e83e83068da5cc7e6de35e69d2
A few code changes were needed to accompany the test:
* Adding setObjectName() calls for a few Qt controls to make them easily
accessible from the test.
* Calling contextMenu->popup() instead of contextMenu->exec() to open
the transaction list context menu without blocking the test thread.
* Opening the context menu at the contextualMenu event point rather than
the cursor position (this change was not strictly needed to make the test
work, but is more correct).
* Updating the bumped transaction row with showTransaction=true instead of
false. This is needed to prevent the bumped tx from being hidden, so the last
part of the test which attempts to bump the bumped tx can work. (Technically
this change is a more general bugfix not limited to the testing environment,
but the bug doesn't happen outside of the testing environment because in the
full Qt client, a queued NotifyTransactionChanged notification causes the row
to be updated twice, first with showTransaction=false, then immediately after
with showTransaction=true.)
a38783747 Make sure we re-check the conditions of a feebump during commit (Jonas Schnelli)
9b9ca538c Only update the transactionrecord if the fee bump has been commited (Jonas Schnelli)
6ed4368f1 Make sure we use nTxConfirmTarget during Qt fee bumps (Jonas Schnelli)
be08fc39d Make sure we always update the table row after a bumpfee call (Jonas Schnelli)
2678d3dc6 Show old-fee, increase a new-fee in Qt fee bumper confirmation dialog (Jonas Schnelli)
2ec911f60 Add cs_wallet lock assertion to SignTransaction() (Jonas Schnelli)
fbf385cc8 [Qt] simple fee bumper with user verification (Jonas Schnelli)
Tree-SHA512: a3ce626201abf64cee496dd1d83870de51ba633de40c48eb0219c3eba5085c038af34c284512130d2544de20c1bff9fea1b78f92e3574c21dd4e96c11b8e7d76
Motivation for moving these is to make supporting IPC simpler (#10102), so
these lookups can be one-shot IPC requests, instead of back-and-forth
interactions over the IPC channel.
Also these functions are potentially useful outside of the bitcoin GUI (e.g.
for RPCs).
c1082a7 Chainparams: Use the factory for pow tests (Jorge Timón)
2351a06 Chainparams: Get rid of CChainParams& Params(std::string) (Jorge Timón)
f87f362 Chainparams: Use a regular factory for creating chainparams (Jorge Timón)
Tree-SHA512: 359c8a2a1bc9d02db7856d02810240ada28048ac088f878b575597a7255cdb0ffdd1a647085ee67a34c6a7e7ed9e6cfdb61240cf6e75139619b640dbb096072c
911a480 wallet: Add comment describing the various classes in walletdb.h (Wladimir J. van der Laan)
69d2e9b wallet: Make IsDummy private in CWalletDBWrapper (Wladimir J. van der Laan)
3323281 wallet: CWalletDB CDB composition not inheritance (Wladimir J. van der Laan)
be9e1a9 wallet: Reduce references to global bitdb environment (Wladimir J. van der Laan)
071c955 wallet: Get rid of fFileBacked (Wladimir J. van der Laan)
71afe3c wallet: Introduce database handle wrapper (Wladimir J. van der Laan)
Tree-SHA512: e4e72953c61a2f6995d609a32f8ed8e18cab9a92bc9e193d46a1d1f06d9daa5c6da6fce2867d4e3ba4fc0439141901a3d35f246486f0fa8f59587786379dfcbd
68af651 MOVEONLY: move TxConfirmStats to cpp (Alex Morcos)
2332f19 Initialize TxConfirmStats in constructor (Alex Morcos)
5ba81e5 Read and Write fee estimate file directly from CBlockPolicyEstimator (Alex Morcos)
14e10aa Call estimate(Smart)Fee directly from CBlockPolicyEstimator (Alex Morcos)
dbb9e36 Give CBlockPolicyEstimator it's own lock (Alex Morcos)
f6187d6 Make processBlockTx private. (Alex Morcos)
ae7327b Make feeEstimator its own global instance of CBlockPolicyEstimator (Alex Morcos)
Tree-SHA512: dbf3bd2b30822e609a35f3da519b62d23f8a50e564750695ddebd08553b4c01874ae3e07d792c6cc78cc377d2db33b951ffedc46ac7edaf5793f9ebb931713af
Abstract database handle from explicit strFilename into
CWalletDBWrapper.
Also move CWallet::Backup to db.cpp - as it deals with representation
details this is a database specific operation.
e9ff818 Fix for issues with startup and multiple monitors on windows. (Allan Doensen)
Tree-SHA512: 8502042a9b5a2fd6f5e409163bee9bd7c85e34c158754f393065f8cc6cdd0f8505b9a1803069d01fc1fb2df04d1b2ed6291388851f2ed3608eb2dd53fc22e06e
9ab9e7d Add a button to open the config file in a text editor (Eric Shaw Jr)
Tree-SHA512: 1d13be9ac788a05a5116dbb3e1136ef65732dc2b5634547860612658109668922c9ea80b77bde4ba5beaa762d54f2a986a6064d4e34e963cdcd3d126a4eced37
e9a6461 Make qt wallet test compatible with qt4 (Russell Yanofsky)
Tree-SHA512: a3e4598986cb3c5c20aaa1d440abc886d84fcc69a6ee4079787cfc8e3a2dce655060ff95612cb15ce8b5a9b8911e4afe2281345b59a4353ec32edf3771338381
This changes the logging categories to boolean flags instead of strings.
This simplifies the acceptance testing by avoiding accessing a scoped
static thread local pointer to a thread local set of strings. It
eliminates the only use of boost::thread_specific_ptr outside of
lockorder debugging.
This change allows log entries to be directed to multiple categories
and makes it easy to change the logging flags at runtime (e.g. via
an RPC, though that isn't done by this commit.)
It also eliminates the fDebug global.
Configuration of unknown logging categories now produces a warning.
Unlike Qt5, the Qt4 signals implementation doesn't allow a signal to be
directly connected to a c++ lambda expression. Work around this by defining a
Callback QObject with a virtual method that can forward calls to a closure.
The Qt4 error was reported by Patrick Strateman <patrick.strateman@gmail.com>
in https://github.com/bitcoin/bitcoin/pull/10039#issuecomment-289248763
4df76e2 Ensure an item exists on the rpcconsole stack before adding (Andrew Chow)
Tree-SHA512: f3fd5e70da186949aff794f6e2ba122da2145331212dcc5e0595285bee9dc3aa6b400b15e8eeec4476099965b74f46c4ef80f8ed1e05d490580167b002b9a5e7
Construct scoped_connection directly instead of relying on copy initialization
and move constructor. Avoids the following compile error in debian jessie:
```
In file included from /usr/include/boost/signals2/signal.hpp:21:0,
from ./util.h:29,
from ./dbwrapper.h:11,
from ./txdb.h:10,
from ./test/test_bitcoin.h:11,
from qt/test/wallettests.cpp:11:
/usr/include/boost/signals2/connection.hpp: In function ‘uint256 {anonymous}::SendCoins(CWallet&, SendCoinsDialog&, const CBitcoinAddress&, CAmount)’:
/usr/include/boost/signals2/connection.hpp:234:7: error: ‘boost::signals2::scoped_connection::scoped_connection(const boost::signals2::scoped_connection&)’ is private
scoped_connection(const scoped_connection &other);
^
qt/test/wallettests.cpp:47:6: error: within this context
});
^
```
Error reported by Pavel Janík <Pavel@Janik.cz> in
https://github.com/bitcoin/bitcoin/pull/9974#issuecomment-287550034
9576b01 Enable xvfb in travis to allow running test_bitcoin-qt (Russell Yanofsky)
9e6817e Add new test_bitcoin-qt static library dependencies (Russell Yanofsky)
2754ef1 Add simple qt wallet test sending a transaction (Russell Yanofsky)
b61b34c Add braces to if statements in Qt test_main (Russell Yanofsky)
cc9503c Make qt test compatible with TestChain100Setup framework (Russell Yanofsky)
91e3035 Make test_bitcoin.cpp compatible with Qt Test framework (Russell Yanofsky)
Tree-SHA512: da491181848b8c39138e997ae5ff2df0b16eef2d9cdd0a965229b1a28d4fa862d5f1ef314a1736e5050e88858f329124d15c689659fc6e50fefde769ba24e523
Avoids following error when qt is statically linked into the test binary, as on
travis:
This application failed to start because it could not find or load the Qt platform plugin "xcb"
in "".
7abe7bb Qt/Send: Give fallback fee a reasonable indent (Luke Dashjr)
3e4d7bf Qt/Send: Figure a decent warning colour from theme (Luke Dashjr)
c5adf8f [Qt] Show more significant warning if we fall back to the default fee (Jonas Schnelli)
Tree-SHA512: 9e85b5b398d7a49aaf6c42578d63750b1b7aa9cc9e84d008fe21d6c53f1ffe2fb69286a1a764e634ebca3286564615578eea0a1bc883e4b332be8306d9883d14
This removes the option from the wallet to not pay a fee on "small"
transactions which spend "old" inputs.
This code is no longer worth keeping around, as almost all miners
prefer not to include transactions which pay no fee at all.
- Change initializeResult(int) to initializeResult(bool) to avoid
implicit type conversion.
- Use EXIT_FAILURE and EXIT_SUCCESS instead of magic numbers.
- Remove the argument from shutdownResult(int); it was called with a
constant argument.
f6d18f5 Qt/Intro: Explain a bit more what will happen first time (Luke Dashjr)
50c5657 Qt/Intro: Storage shouldn't grow significantly with pruning enabled (Luke Dashjr)
9adb694 Qt/Intro: Move sizeWarningLabel text into C++ code (Luke Dashjr)
Minimum boost version was bumped to 1.47.0 in #8920, which
means the configure step won't even pass with older boost.
This version has boost filesystem v3, which means the
(crappy) fallbacks for older versions can go.
a9baa6d Bugfix: Qt/Intro: Pruned nodes never require *more* space (Luke Dashjr)
93ffba7 Bugfix: Qt/Intro: Chain state needs to be stored even with the full blockchain (Luke Dashjr)
c8cee26 Qt/Intro: Update block chain size (Luke Dashjr)
Easier to understand what the button does (it resets the graph view).
'Clear' might mean that the graph is emptied and stops updating, whereas
its easier to see that you're just starting fresh with 'Reset'.
Before this commit, the checkbox would always start off unchecked. After this
commit it will respect the -walletrbf setting (which is currently false by
default).
The use of mocktime in test logic means that comparisons between
GetTime() and GetTimeMicros()/1000000 are unreliable since the former
can use mocktime values while the latter always gets the system clock;
this changes the networking code's inactivity checks to consistently
use the system clock for inactivity comparisons.
Also remove some hacks from setmocktime() that are no longer needed,
now that we're using the system clock for nLastSend and nLastRecv.
The additional initializer is for the named arguments, which are unused
in the test (and unfilled global fields will be initialized to 0
anyhow), so this is a no-op apart from the warning.
8562792 GUI/RPCConsole: Include importmulti in history sensitive-command filter (Luke Dashjr)
ff77faf Qt/RPCConsole: Use RPCParseCommandLine to perform command filtering (Luke Dashjr)
a79598d Qt/Test: Make sure filtering sensitive data works correctly in nested commands (Luke Dashjr)
629cd42 Qt/RPCConsole: Teach RPCParseCommandLine how to filter out arguments to sensitive commands (Luke Dashjr)
e2d9213 Qt/RPCConsole: Make it possible to parse a command without executing it (Luke Dashjr)
1755c04 Qt/RPCConsole: Truncate filtered commands to just the command name, rather than skip it entirely in history (Luke Dashjr)
d80a006 Qt/RPCConsole: Add signmessagewithprivkey to list of commands filtered from history (Luke Dashjr)
afde12f Qt/RPCConsole: Refactor command_may_contain_sensitive_data function out of RPCConsole::on_lineEdit_returnPressed (Luke Dashjr)
de8980d Bugfix: Do not add sensitive information to history for real (Luke Dashjr)
9044908 Qt/RPCConsole: Don't store commands with potentially sensitive information in the history (Jonas Schnelli)
fc95daa Qt/RPCConsole: Save current command entry when browsing history (Jonas Schnelli)
749be01 Move GetWarnings() into its own file. (Gregory Maxwell)
e3ba0ef Eliminate data races for strMiscWarning and fLargeWork*Found. (Gregory Maxwell)
c63198f Make QT runawayException call GetWarnings instead of directly access strMiscWarning. (Gregory Maxwell)
Defers to pre-defined version if found (e.g. protobuf). For protobuf case, the definitions are identical and thus include order should not affect results.
f36349e qt: Remove on_toggleNetworkActiveButton_clicked from RPCConsole (Wladimir J. van der Laan)
297cc20 qt: layoutAboutToChange signal is called layoutAboutToBeChanged (Wladimir J. van der Laan)
81e3228 Make CTransaction actually immutable (Pieter Wuille)
42fd8de Make DecodeHexTx return a CMutableTransaction (Pieter Wuille)
c3f5673 Make CWalletTx store a CTransactionRef instead of inheriting (Pieter Wuille)
a188353 Switch GetTransaction to returning a CTransactionRef (Pieter Wuille)
042f9fa qt: Show progress overlay when clicking spinner icon (Wladimir J. van der Laan)
827d9a3 qt: Replace NetworkToggleStatusBarControl with generic ClickableLabel (Wladimir J. van der Laan)
76faa3c Rename the remaining main.{h,cpp} to validation.{h,cpp} (Matt Corallo)
e736772 Move network-msg-processing code out of main to its own file (Matt Corallo)
87c35f5 Remove orphan state wipe from UnloadBlockIndex. (Matt Corallo)
This was misnamed, resulting in a warning message and missing
functionality. I'm not sure what the change in behavior will be here,
this needs testing.
Also remove connection to non-existing slot "test".
This was used for testing if the signal arrived. It is no
longer necessary.
Fixes:
2016-12-01 10:04:06 GUI: QObject::connect: No such signal PeerTableModel::layoutAboutToChange() in qt/rpcconsole.cpp:518
2016-12-01 10:04:06 GUI: QObject::connect: (receiver name: 'RPCConsole')
2016-12-01 10:04:06 GUI: QObject::connect: No such slot RPCConsole::test() in qt/rpcconsole.cpp:781
2016-12-01 10:04:06 GUI: QObject::connect: (receiver name: 'RPCConsole')
deec83f init: Get rid of fServer flag (Wladimir J. van der Laan)
16ca0bf init: Try to aquire datadir lock before and after daemonization (Wladimir J. van der Laan)
0cc8b6b init: Split up AppInit2 into multiple phases (Wladimir J. van der Laan)
Bring up the modal progress overlay when the user clicks the spinner
icon in the task bar.
I think this is the intuitive thing to do when that icon is clicked.
ed998ea qt: Avoid OpenSSL certstore-related memory leak (Wladimir J. van der Laan)
5204598 qt: Avoid shutdownwindow-related memory leak (Wladimir J. van der Laan)
e4f126a qt: Avoid splash-screen related memory leak (Wladimir J. van der Laan)
693384e qt: Prevent thread/memory leak on exiting RPCConsole (Wladimir J. van der Laan)
47db075 qt: Plug many memory leaks (Wladimir J. van der Laan)
Make splash screen queue its own deletion when it receives the finished
command, instead of relying on WA_DeleteOnClose which doesn't work under
these circumstances.
