spec/index.md
2018-11-09 17:17:54 -05:00

55 KiB
Raw Blame History

LBRY: A Decentralized Digital Content Marketplace

Please excuse the unfinished state of this paper. It is being actively worked on. The content here is made available early because it contains useful information for developers.

For more technical information about LBRY, visit lbry.tech.

Menu

Introduction

LBRY is a protocol for accessing and publishing digital content in a global, decentralized marketplace. Clients can use LBRY to publish, host, find, download, and pay for content — books, movies, music, or anything else that can be represented as a stream of bits. Anyone can participate and no permission is required, nor can anyone be blocked from participating. The system is distributed, so no single entity has unilateral control, nor will the removal of any single entity prevent the system from functioning.

TODO:

  • why is it significant
  • whom does it help
  • why is it different/better than what existed before

Overview

This document defines the LBRY protocol, its components, and how they fit together. LBRY consists of several discrete components that are used together in order to provide the end-to-end capabilities of the protocol. There are two distributed data stores (blockchain and DHT), a peer-to-peer protocol for exchanging data, and several specifications for data structure, transformation, and retrieval.

Assumptions

This document assumes that the reader is familiar with Bitcoin and blockchain technology. It does not attempt to document the Bitcoin protocol or explain how it works. The Bitcoin developer reference is recommended for anyone wishing to understand the technical details.

Conventions and Terminology

file
A single piece of content published using LBRY.
blob
The unit of data transmission on the data network. A published file is split into many blobs.
stream
A set of blobs that can be reassembled into a file. Every stream has a descriptor blob and one or more content blobs.
blob hash
The output of a cryptographic hash function is applied to a blob. Hashes are used to uniquely identify blobs and to verify that the contents of the blob are correct. Unless otherwise specified, LBRY uses SHA384 as the hash function.
metadata
Information about the contents of a stream (e.g. creator, description, stream descriptor hash, etc). Metadata is stored in the blockchain.
name
A human-readable UTF8 string that is associated with a stream.
stake
An entry in the blockchain that commits credits toward a name.
claim
A stake that contains metadata about a stream or channel.
support
A stake that lends its credits to bolster an existing claim.
channel
The unit of pseudonymous publisher identity. Claims may be part of a channel.
URL
A reference to a claim that specifies how to retrieve it.

Blockchain

The LBRY blockchain is a public, proof-of-work blockchain. It serves three key purposes:

  1. An index of the content available on the network
  2. A payment system and record of purchases for priced content
  3. Trustful publisher identities

The LBRY blockchain is a fork of the Bitcoin blockchain, with substantial modifications. This document will not cover or specify any aspects of LBRY that are identical to Bitcoin, and will instead focus on the differences.

Stakes

A stake is a a single entry in the blockchain that commits credits toward a name. The two types of stakes are claims and supports.

All stakes have these properties:

id
A 20-byte hash unique among all stakes. See Stake Identifier Generation.
amount
A quantity of tokens used to back the stake. See Controlling.

Claims

A claim is a stake that stores metadata. There are two types of claims:

stream
Declares the availability, access method, and publisher of a stream of bytes (an encoded file).
channel
Creates a pseudonym that can be declared as the publisher of a set of stream claims.

Properties

In addition to the properties that all stakes have, claims have two more properties:

name
A normalized UTF-8 string of up to 255 bytes used to address the claim. See URLs and Normalization.
value
Metadata about a stream or a channel. See Metadata.

Example Claim

Here is an example stream claim:

{
  "claim_id": "6e56325c5351ceda2dd0795a30e864492910ccbf",
  "name": "lbry",
  "amount": 1.0,
  "value": {
    "stream": {
      "title": "What is LBRY?",
      "author": "Samuel Bryan",
      "description": "What is LBRY? An introduction with Alex Tabarrok",
      "language": "en",
      "license": "LBRY inc",
      "thumbnail": "https://s3.amazonaws.com/files.lbry.io/logo.png",
      "mediaType": "video/mp4",
      "stream_hash": "232068af6d51325c4821ac897d13d7837265812164021ec832cb7f18b9caf6c77c23016b31bac9747e7d5d9be7f4b752",
    },
  }
}

Figure: Note: the blockchain treats the value as an opaque byte string and does not impose any structure on it. Structure is applied and validated higher in the stack. In this example, the value is shown for demonstration purposes.

Operations

There are three claim operations: create, update, and abandon.

create
Makes a new claim.
update
Changes the value or amount of an existing claim, without changing the claim ID.
abandon
Withdraws a claim, freeing the associated credits to be used for other purposes.

Supports

A support is a stake that lends its amount to an existing claim.

Supports have one extra property on top of the basic stake properties: a claim_id. This is the ID of the claim that the support is bolstering.

Supports function analogously to claims in terms of Claim Operations and Claim Statuses, with the exception that they cannot be updated or themselves supported.

Claimtrie

The claimtrie is the data structure used to store the set of all claims and prove the correctness of claim resolution.

The claimtrie is implemented as a Merkle tree that maps names to claims. Claims are stored as leaf nodes in the tree. Names are stored as the path from the root node to the leaf node.

The root hash is the hash of the root node. It is stored in the header of each block in the blockchain. Nodes in the LBRY network use the root hash to efficiently and securely validate the state of the claimtrie.

Multiple claims can exist for the same name. They are all stored in the leaf node for that name, sorted by the amount of credits backing the claim (descending), then by block height (ascending), then by transaction order in the block (ascending).

For more details on the specific claimtrie implementation, see the source code.

Statuses

Throughout this section we use the word "claim" to refer to both claims and supports, unless otherwise specified.

Claims and supports can have one or more of the following statuses at a given block.

Accepted

An accepted claim is one that has been been entered into the blockchain. This happens when the transaction containing it is included in a block.

Accepted claims do not affect the intra-leaf claim order until they are active.

The sum of the amount of a claim and all accepted supports is called the total amount.

Abandoned

An abandoned claim is one that was withdrawn by its creator or current owner. Spending a transaction that contains a claim will cause that claim to become abandoned. Abandoned claims are removed from the claimtrie.

While data related to abandoned claims technically still resides in the blockchain, it is improper to use this data to fetch the associated content, and active claims signed by abandoned identities will no longer be reported as valid.

Active

An active claim is an accepted and non-abandoned claim that has been in the blockchain for an algorithmically determined number of blocks. This length of time required is called the activation delay.

If the claim is an update to an already active claim, is the first claim for a name, or does not cause a change in which claim is controlling the name, the activation delay is 0 (i.e. the claim becomes active in the same block it is accepted).

Otherwise, the activation delay is determined by a formula covered in Claimtrie Transitions. The formula's inputs are the height of the current block, the height at which the claim was accepted, and the height at which the controlling claim last changed.

The sum of the amount of an active claim and all active supports is called it's effective amount. Only the effective amount affects the sort order of claims in a leaf node. Claims that are not active have an effective amount of 0.

Controlling

A controlling claim is the active claim that is first in the sort order of a leaf node. That is, it has the highest effective amount of all claims with the same name.

Only one claim can be controlling for a given name at a given block.

Claimtrie Transitions

To determine the sort order of claims in a leaf node, the following algorithm is used:

  1. For each claim, recalculate the effective amount.

  2. Sort the claims by effective amount in descending order. Claims tied for the same amount are ordered by block height (ascending), then by transaction order within the block (ascending).

  3. If the controlling claim from the previous block is still first in the order, then the sort is finished.

  4. Otherwise, a takeover is occurring. Set the takeover height for this name to the current height, recalculate which claims and supports are now active, and return to step 1.

  5. At this point, the claim with the greatest effective amount is the controlling claim at this block.

The purpose of 4 is to handle the case when multiple competing claims are made on the same name in different blocks, and one of those claims becomes active but another still-inactive claim has the greatest amount. Step 4 will cause the greater claim to also activate and become the controlling claim.

Determining Active Claims

If a claim does not become active immediately, it becomes active at the block heigh determined by the following formula:

C + min(4032, floor((H-T) / 32))

Where:

  • C = claim height (height when the claim was accepted)
  • H = current height
  • T = takeover height (the most recent height at which the controlling claim for the name changed)

In written form, the delay before a claim becomes active is equal to the claims height minus height of the last takeover, divided by 32. The delay is capped at 4032 blocks, which is 7 days of blocks at 2.5 minutes per block (our target block time). The max delay is reached 224 (7x32) days after the last takeover.

The purpose of this delay function is to give long-standing claimants time to respond to changes, while still keeping takeover times reasonable and allowing recent or contentious claims to change state quickly.

Claim Transition Example

Here is a step-by-step example to illustrate the different scenarios. All claims are for the same name.

Block 13: Claim A for 10LBC is accepted. It is the first claim, so it immediately becomes active and controlling.
State: A(10) is controlling

Block 1001: Claim B for 20LBC is accepted. Its activation height is 1001 + min(4032, floor((1001-13) / 32)) = 1001 + 30 = 1031.
State: A(10) is controlling, B(20) is accepted.

Block 1010: Support X for 14LBC for claim A is accepted. Since it is a support for the controlling claim, it activates immediately.
State: A(10+14) is controlling, B(20) is accepted.

Block 1020: Claim C for 50LBC is accepted. The activation height is 1020 + min(4032, floor((1020-13) / 32)) = 1020 + 31 = 1051.
State: A(10+14) is controlling, B(20) is accepted, C(50) is accepted.

Block 1031: Claim B activates. It has 20LBC, while claim A has 24LBC (10 original + 14 from support X). There is no takeover, and claim A remains controlling.
State: A(10+14) is controlling, B(20) is active, C(50) is accepted.

Block 1040: Claim D for 300LBC is accepted. The activation height is 1040 + min(4032, floor((1040-13) / 32)) = 1040 + 32 = 1072.
State: A(10+14) is controlling, B(20) is active, C(50) is accepted, D(300) is accepted.

Block 1051: Claim C activates. It has 50LBC, while claim A has 24LBC, so a takeover is initiated. The takeover height for this name is set to 1051, and therefore the activation delay for all the claims becomes min(4032, floor((1051-1051) / 32)) = 0. All the claims become active. The totals for each claim are recalculated, and claim D becomes controlling because it has the highest total.
State: A(10+14) is active, B(20) is active, C(50) is active, D(300) is controlling.

Normalization

Names in the claimtrie are normalized to avoid confusion due to Unicode equivalence or casing. All names are converted using Unicode Normalization Form D (NFD), then lowercased using the en_US locale when possible.

URLs

URLs are human-readable references to claims. All URLs:

  1. must contain a name (see Claim Properties)
  2. and resolve to a single, specific claim for that name

The ultimate purpose of much of the claim and blockchain design is to provide human-readable URLs that can be provably resolved by clients without a full copy of the blockchain (i.e. Simplified Payment Verification wallets).

It is possible to write extremely short, human-readable and memorabl

Components

A URL is a name with one or more modifiers. A bare name on its own will resolve to the controlling claim at the latest block height. Common URL structures are:

Stream Claim Name

A basic claim for a name.

lbry://meet-lbry
Channel Claim Name

A basic claim for a channel.

lbry://@lbry
Channel Claim Name and Stream Claim Name

A URL containing both a channel and a stream claim name. URLs containing both are resolved in two steps. First, the channel is resolved to it's associated claim. Then the stream claim name is resolved to get the appropriate claim from among the claims in the channel.

lbry://@lbry/meet-lbry
Claim ID

A claim for this name with this claim ID. Partial prefix matches are allowed (see Resolution).

lbry://meet-lbry#7a0aa95c5023c21c098
lbry://meet-lbry#7a
lbry://@lbry#3f/meet-lbry
Claim Sequence

The _n_th claim for this name, in the order the claims entered the blockchain. n must be a positive number. This can be used to resolve claims in the order in which they were recorded, rather than by which claim has the most support.

lbry://meet-lbry:1
lbry://@lbry:1/meet-lbry
Bid Position

The _n_th claim for this name, in order of most support to least total support. n must be a positive number. This is useful for resolving non-winning bids in bid order.

lbry://meet-lbry$2
lbry://meet-lbry$3
lbry://@lbry$2/meet-lbry
Query Params

These parameters are reserved for future use.

lbry://meet-lbry?arg=value+arg2=value2

Grammar

The full URL grammar is defined using Xquery EBNF notation:

URL ::= Scheme Path Query?

Scheme ::= 'lbry://'

Path ::=  StreamClaimNameAndModifier | ChannelClaimNameAndModifier ( '/' StreamClaimNameAndModifier )?

StreamClaimNameAndModifier ::= StreamClaimName Modifier?
ChannelClaimNameAndModifier ::= ChannelClaimName Modifier?

StreamClaimName ::= NameChar+
ChannelClaimName ::= '@' NameChar+

Modifier ::= ClaimID | ClaimSequence | BidPosition
ClaimID ::= '#' Hex+
ClaimSequence ::= ':' PositiveNumber
BidPosition ::= '$' PositiveNumber

Query ::= '?' QueryParameterList
QueryParameterList ::= QueryParameter ( '&' QueryParameterList )*
QueryParameter ::= QueryParameterName ( '=' QueryParameterValue )?
QueryParameterName ::= NameChar+
QueryParameterValue ::= NameChar+

PositiveDigit ::= [123456789]
Digit ::= '0' | PositiveDigit
PositiveNumber ::= PositiveDigit Digit*

HexAlpha ::= [abcdef]
Hex ::= (Digit | HexAlpha)+

NameChar ::= Char - [=&#:$@?/]  /* any character that is not reserved */
Char ::= #x9 | #xA | #xD | [#x20-#xD7FF] | [#xE000-#xFFFD] | [#x10000-#x10FFFF] /* any Unicode character, excluding the surrogate blocks, FFFE, and FFFF. */

Resolution

URL resolution is the process of translating a URL into it's associated claim id and metadata.

No Modifier

Return the controlling claim for the name. Stream claims and channel claims are resolved the same way.

Claim ID

Get all claims for the claim name whose IDs start with the given ClaimID. Sort the claims in ascending order by block height and position within the block. Return the first claim.

Claim Sequence

Get all claims for the claim name. Sort the claims in ascending order by block height and position within the block. Return the Nth claim, where N is the given ClaimSequence value.

Bid Position

Get all claims for the claim name. Sort the claims in descending order by total effective amount. Return the Nth claim, where N is the given BidSequence value.

ChannelName and ClaimName

If both a channel name and a claim name is present, resolution happens in two steps. First, remove the / and StreamClaimNameAndModifier from the path, and resolve the URL as if it only had a ChannelClaimNameAndModifier. Then get the list of all claims in that channel. Finally, resolve the StreamClaimNameAndModifier as if it was its own URL, but instead of considering all claims, only consider the set of claims in the channel.

Technically, if multiple claims for the same name exist inside the same channel, they are resolved via the same resolution rules applied entirely within the sub-scope of the channel. Pragmatically, it rarely makes sense for channels to use the same name twice and support for this functionality may be unreliable in current tooling.

Examples

Suppose the following names were claimed in the following order:

Name Claim ID Amount
apple 690eea 1
banana 714a3f 2
cherry bfaabb 100
apple 690eea 10
@Arthur b7bab5 1
@Bryan 0da517 1
@Chris b3f7b1 1
@Chris/banana fc861c 1
@Arthur/apple 37ee1 20
@Bryan/cherry a18bca 10
@Chris 005a7d 100
@Arthur/cherry d39aa0 20

Here is how the following URLs should resolve:

URL Claim ID Note
lbry://apple a37ee1
lbry://banana 714a3f
lbry://@Chris 005a7d
lbry://@Chris/banana not found the controlling @Chris does not have a banana
lbry://@Chris:1/banana fc861c
lbry://@Chris:#fc8/banana fc861c
lbry://cherry bfaabb
lbry://@Arthur/cherry d39aa0
lbry://@Bryan 0da517
lbry://banana$1 714a3f
lbry://banana$2 fc861c
lbry://banana$3 not found
lbry://@Arthur:1 b7bab5

Design Notes

The most contentious aspect of this design has been the choice to resolve naked names (sometimes called vanity names) to the claim with the largest number of staked credits.

First, it is important to note the problems in existing domain allocation design. Most existing public name schemes are first-come, first-serve with a fixed price. This leads to several bad outcomes:

  1. Speculation and extortion. Entrepreneurs are incentivized to register common names even if they don't intend to use them, in hopes of selling them to the proper owner in the future for an exorbitant price. While speculation in general can have positive externalities (stable prices and price signals), in this case it is pure value extraction. Speculation also harms the user experience, who will see the vast majority of URLs sitting unused (c.f. Namecoin).

  2. Bureaucracy and transaction costs. While a centralized system can allow for an authority to use a process to reassign names based on trademark or other common use reasons, this system is also imperfect. Most importantly, it is a censorship point and an avenue for complete exclusion. Additionally, such processes are often arbitrary, change over time, involve significant transaction costs, and still lead to names being used in ways that are contrary to user expectation (e.g. nissan.com).

  3. Inefficiencies from price controls. Any system that does not allow a price to float freely creates inefficiencies. If the set price is too low, we facilitate speculation and rent-seeking. If the price is too high, we see people excluded from a good that it would otherwise be beneficial for them to purchase.

We sought an algorithmic design built into consensus that would allow URLs to flow to their highest valued use. Following Coase, this staking design allows for clearly defined rules, low transaction costs, and no information asymmetry, minimizing inefficiency in URL allocation.

Finally, it's important to note that only vanity URLs have this property. Extremely short, memorable URLs like lbry://myclaimname#a exist and are available for the minimal cost of issuing a transaction.

Transactions

The LBRY blockchain includes the following changes to Bitcoin's transaction scripting language.

Operations and Opcodes

To enable claim operations, we added three new opcodes to the scripting language: OP_CLAIM_NAME, OP_UPDATE_CLAIM, and OP_SUPPORT_CLAIM. In Bitcoin they are respectively OP_NOP6, OP_NOP7, and OP_NOP8. The opcodes are used in output scripts to interact with the claimtrie. Each opcode is followed by one or more parameters. Here's how these opcodes are used:

OP_CLAIM_NAME <name> <value> OP_2DROP OP_DROP <outputScript>

OP_UPDATE_CLAIM <name> <claimId> <value> OP_2DROP OP_2DROP <outputScript>

OP_SUPPORT_CLAIM <name> <claimId> OP_2DROP OP_DROP <outputScript>

The <name> parameter is the name that the claim will be associated with. <value> is the protobuf-encoded claim metadata and optional channel signature (see Metadata for info about this value). The <claimId> is the claim ID of a previous claim that is being updated or supported.

Each opcode will push a zero on to the execution stack. Those zeros, as well as any additional parameters after the opcodes, are all dropped by OP_2DROP and OP_DROP. <outputScript> can be any valid script, so a script using these opcodes is also a pay-to-pubkey script. This means that claim scripts can be spent just like regular Bitcoin output scripts.

Claim Identifier Generation

Like any standard Bitcoin output script, a claim script will be associated with a transaction hash and output index. This combination of transaction hash and index is called an outpoint. Each claim script has a unique outpoint. The outpoint is hashed using SHA-256 and RIPEMD-160 to generate the claim ID for a claim. For the example above, let's say claim script is included in transaction 7560111513bea7ec38e2ce58a58c1880726b1515497515fd3f470d827669ed43 at the output index 1. Then the claim ID would be 529357c3422c6046d3fec76be2358004ba22e323. An implementation of this is available here.

OP_CLAIM_NAME

New claims are created using OP_CLAIM_NAME. For example, a claim transaction setting the name Fruit to the value Apple will look like this:

OP_CLAIM_NAME Fruit Apple OP_2DROP OP_DROP OP_DUP OP_HASH160 <address> OP_EQUALVERIFY OP_CHECKSIG
OP_UPDATE_CLAIM

OP_UPDATE_CLAIM updates a claim by replacing its metadata. An update transaction has an added requirement that it must spend the output for the existing claim that it wishes to update. Otherwise, it will be considered invalid and will not make it into the claimtrie. Thus it must have the following redeem script:

<signature> <pubKeyForPreviousAddress>

The syntax is identical to the standard way of redeeming a pay-to-pubkey script in Bitcoin, with the caveat that <pubKeyForPreviousAddress> must be the public key for the address of the output that contains the claim that will be updated.

To change the value of the previous example claim to “Banana”, the payout script would be

OP_UPDATE_CLAIM Fruit 529357c3422c6046d3fec76be2358004ba22e323 Banana OP_2DROP OP_2DROP OP_DUP OP_HASH160 <address> OP_EQUALVERIFY OP_CHECKSIG

The <address> in this script may be the same as the address in the original transaction, or it may be a new address.

OP_SUPPORT_CLAIM

A support for the original example claim will have the following payout script:

OP_SUPPORT_CLAIM Fruit 529357c3422c6046d3fec76be2358004ba22e323 OP_2DROP OP_DROP OP_DUP OP_HASH160 <address> OP_EQUALVERIFY OP_CHECKSIG

The <address> in this script may be the same as the address in the original transaction, or it may be a new address.

Tips

Addresses

The address version byte is set to 0x55 for standard (pay-to-public-key-hash) addresses and 0x7a for multisig (pay-to-script-hash) addresses. P2PKH addresses start with the letter b, and P2SH addresses start with r.

All the chain parameters are defined here.

Proof of Payment

TODO: Explain how transactions serve as proof that a client has made a valid payment for a piece of content.

Consensus

LBRY makes a few small changes to consensus rules.

Block Timing

The target block time was lowered from 10 minutes to 2.5 minutes to facilitate faster transaction confirmation.

Difficulty Adjustment

The proof-of-work target is adjusted every block to better adapt to sudden changes in hash rate. The exact adjustment algorithm can be seen here.

Block Hash Algorithm

LBRY uses a combination of SHA-256, SHA-512, and RIPEMD-160. The exact hashing algorithm can be seen here.

Block Rewards

The block reward schedule was adjusted to provide an initial testing period, a quick ramp-up to max block rewards, then a logarithmic decay to 0. The source for the algorithm is here.

Metadata

Metadata is structured information about the stream or channel separate from the content itself (e.g. the title, language, media type, etc.). It is stored in the value property of a claim.

Metadata is stored in a serialized binary format via Protocol Buffers. This allows for metadata to be:

  • Extensibile. Metadata can encompass thousands of fields for dozens of types of content. It must be efficient to both modify the structure and maintain backward compatibility.
  • Compact. Blockchain space is expensive. Data must be stored as compactly as possible.
  • Interoperabile. Metadata will be used by many projects written in different languages.

The serialized metadata may be signed to indicate membership in a channel. See Channels for more info.

Specification

As the metadata specification is designed to grow and change frequently, the full specification will not be examined here. The types repository is considered the precise specification.

Instead, let's look at an example and some key fields.

Example

Heres some example metadata:

{
  "stream": {
    "title": "What is LBRY?",
    "author": "Samuel Bryan",
    "description": "What is LBRY? An introduction with Alex Tabarrok",
    "language": "en",
    "license": "LBRY inc",
    "thumbnail": "https://s3.amazonaws.com/files.lbry.io/logo.png",
    "mediaType": "video/mp4",
    "streamHash": "232068af6d51325c4821ac897d13d7837265812164021ec832cb7f18b9caf6c77c23016b31bac9747e7d5d9be7f4b752"
  }
}

Key Fields

Some important metadata fields are highlighted below.

Source and Stream Hashes

The source property contains information about how to fetch the data from the network. Within the source is a unique identifier to locate and find the content in the data network. More in Data.

Fees and Fee Structure

  • LBC
  • Currencies?
  • channel signatures and private keys

Title, Author, Description

Basic information about the stream.

Language

The ISO 639-1 two-letter code for the language of the stream.

Thumbnail

An http or lbry URL to be used to display an image associated with the content.

Media Type

The media type of the item as defined by the IANA.

Channels (Identities)

Channels are the unit of identity in the LBRY system. A channel is a claim for a name beginning with @ that contains a metadata structure for identity rather than content. Included in the metadata is the channel's public key. Here's an example:

"claim_id": "6e56325c5351ceda2dd0795a30e864492910ccbf",
"name": "@lbry",
"amount": 6.26,
"value": {
  "channel": {
    "keyType": "SECP256k1",
    "publicKey": "3056301006072a8648ce3d020106052b8104000a03420004180488ffcb3d1825af538b0b952f0eba6933faa6d8229609ac0aeadfdbcf49C59363aa5d77ff2b7ff06cddc07116b335a4a0849b1b524a4a69d908d69f1bcebb"
  }
}

Claims published to a channel contain a signature made with the corresponding private key. A valid signature proves channel membership.

The purpose of channels is to allow content to be clustered under a single pseudonym or identity. This allows publishers to easily list all their content, maintain attribution, and build their brand.

Signing

A claim is considered part of a channel when its metadata is signed by the channel's private key. Here's the structure of a signed metadata value:

field size description
Version 1 byte Format version. See Format Versions.
Channel ID 20 bytes Claim ID of the channel claim that contains the matching public key. Skip this field if there is no signature.
Signature 64 bytes The signature. Skip this field if there is no signature.
Payload variable The protobuf-encoded metadata.
Format Versions

The following formats are supported:

format description
00000000 No signature.
00000001 Signature using ECDSA SECP256k1 key and SHA-256 hash.
Signing Process
  1. Encode the metadata using protobuf.
  2. Hash the encoded claim using SHA-256.
  3. Sign the hash using the private key associated with the channel.
  4. Append all the values (the version, the claim ID of the corresponding channel claim, the signature, and the protobuf-encoded metadata).
Signature Validation
  1. Split out the version from the rest of the data.
  2. Check the version field. If it indicates that there is no signature, then no validation is necessary.
  3. Split out the channel ID and signature from the rest of the data.
  4. Look up the channel claim to ensure it exists and contains a public key.
  5. Use the public key to verify the signature.

Validation

No enforcement or validation on metadata happens at the blockchain level. Instead, metadata encoding, decoding, and validation is done by clients. This allows evolution of the metadata without changes to consensus rules.

Clients are responsible for validating metadata, including data structure and signatures. This typically happens when the raw binary data stored in the blockchain is decoded client side via Protocol Buffers.

Data

Data refers to the full binary data tht which is ultimate distributed by blah blah blah.

The purpose of blah blah blah is to blah blah.

Encoding

Content on the LBRY network is encoded to facilitate distribution.

Blobs

The unit of data in the LBRY network is called a blob. A blob is an encrypted chunk of data up to 2MiB in size. Each blob is indexed by its blob hash, which is a SHA384 hash of the blob contents. Addressing blobs by their hash protects against naming collisions and ensures that the content you get is what you expect.

Blobs are encrypted using AES-256 in CBC mode and PKCS7 padding. In order to keep each encrypted blob at 2MiB max, a blob can hold at most 2097151 bytes (2MiB minus 1 byte) of plaintext data. The source code for the exact algorithm is available here. The encryption key and IV for each blob is stored as described below.

Streams

Multiple blobs are combined into a stream. A stream may be a book, a movie, a CAD file, etc. All content on the network is shared as streams. Every stream begins with the manifest blob, followed by one or more content blobs. The content blobs hold the actual content of the stream. The manifest blob contains information necessary to find the content blobs and decode them into a file. This includes the hashes of the content blobs, their order in the stream, and cryptographic material for decrypting them.

The blob hash of the manifest blob is called the stream hash. It uniquely identifies each stream.

Manifest Contents

A manifest blob's contents are encoded using a canonical JSON encoding. The JSON encoding must be canonical to support consistent hashing and validation. The encoding is the same as standard JSON, but adds the following rules:

  • Object keys must be quoted and lexicographically sorted.
  • All strings are hex-encoded. Hex letters must be lowercase.
  • Whitespace before, after, or between tokens is not permitted.
  • Floating point numbers, leading zeros, and "minus 0" for integers are not permitted.
  • Trailing commas after the last item in an array or object are not permitted.

Here's an example manifest:

{"blobs":[{"blob_hash":"a6daea71be2bb89fab29a2a10face08143411a5245edcaa5efff48c2e459e7ec01ad20edfde6da43a932aca45b2cec61","iv":"ef6caef207a207ca5b14c0282d25ce21","length":2097152},{"blob_hash":"bf2717e2c445052366d35bcd58edb108cbe947af122d8f76b4856db577aeeaa2def5b57dbb80f7b1531296bd3e0256fc","iv":"a37b291a37337fc1ff90ae655c244c1d","length":2097152},...,{"blob_hash":"322973617221ddfec6e53bff4b74b9c21c968cd32ba5a5094d84210e660c4b2ed0882b114a2392a08b06183f19330aaf","iv": "a00f5f458695bdc9d50d3dbbc7905abc","length":600160}],"filename":"6b706a7977755477704d632e6d7034","key":"94d89c0493c576057ac5f32eb0871180","version":1}

Here's the same manifest, with whitespace added for readability:

{
  "blobs":[
    {
      "blob_hash":"a6daea71be2bb89fab29a2a10face08143411a5245edcaa5efff48c2e459e7ec01ad20edfde6da43a932aca45b2cec61",
      "iv":"ef6caef207a207ca5b14c0282d25ce21",
      "length":2097152
    },
    {
      "blob_hash":"bf2717e2c445052366d35bcd58edb108cbe947af122d8f76b4856db577aeeaa2def5b57dbb80f7b1531296bd3e0256fc",
      "iv":"a37b291a37337fc1ff90ae655c244c1d",
      "length":2097152
    },
    ...,
    {
      "blob_hash":"322973617221ddfec6e53bff4b74b9c21c968cd32ba5a5094d84210e660c4b2ed0882b114a2392a08b06183f19330aaf",
      "iv": "a00f5f458695bdc9d50d3dbbc7905abc",
      "length": 600160
    }  
  ],
  "filename":"6b706a7977755477704d632e6d7034",
  "key":"94d89c0493c576057ac5f32eb0871180",
  "version":1
}

The key field contains the key to decrypt the stream, and is optional. The key may be stored by a third party and made available to a client when presented with proof that the content was purchased. The version field is always 1. It is intended to signal structure changes in future versions of this protocol. The length field for each blob is the length of the encrypted blob, not the original file chunk.

Every stream must have at least two blobs - the manifest blob and a content blob. Consequently, zero-length streams are not allowed.

Stream Encoding

A file must be encoded into a stream before it can be published. Encoding involves breaking the file into chunks, encrypting the chunks into content blobs, and creating the manifest blob. Here are the steps:

Setup
  1. Generate a random 32-byte key for the stream.
Content Blobs
  1. Break the file into chunks of at most 2097151 bytes.
  2. Generate a random IV for each chuck.
  3. Pad each chunk using PKCS7 padding
  4. Encrypt each chunk with AES-CBC using the stream key and the IV for that chunk.
  5. An encrypted chunk is a blob.
Manifest Blob
  1. Fill in the manifest data.
  2. Encode the data using the canonical JSON encoding described above.
  3. Compute the stream hash.

An implementation of this process is available here. fixme: this link is for v0, not v1. need to implement v1 or drop the link.

Stream Decoding

Decoding a stream is like encoding in reverse, and with the added step of verifying that the expected blob hashes match the actual data.

  1. Verify that the manifest blob hash matches the stream hash you expect.
  2. Parse the manifest blob contents.
  3. Verify the hashes of the content blobs.
  4. Decrypt and remove the padding from each content blob using the key and IVs in the manifest.
  5. Concatenate the decrypted chunks in order.

Announce

After a stream is encoded, it must be announced to the network. Announcing is the process of letting other nodes on the network know that you have content available for download. The LBRY network tracks announced content using a distributed hash table.

Distributed Hash Table

Distributed hash tables (or DHTs) have proven to be an effective way to build a decentralized content network. Our DHT implementation follows the Kademlia specification fairly closely, with some modifications.

A distributed hash table is a key-value store that is spread over multiple nodes in a network. Nodes may join or leave the network anytime, with no central coordination necessary. Nodes communicate with each other using a peer-to-peer protocol to advertise what data they have and what they are best positioned to store.

When a host connects to the DHT, it announces the hash for every blob it wishes to share. Downloading a blob from the network requires querying the DHT for a list of hosts that announced that blobs hash (called peers), then requesting the blob from the peers directly.

Announcing to the DHT

A host announces a hash to the DHT in two steps. First, the host looks for nodes that are closest to the target hash. Then the host asks those nodes to store the fact that the host has the target hash available for download.

Finding the closest nodes is done via iterative FindNode DHT requests. The host starts with the closest nodes it knows about and sends a FindNode(target_hash) request to each of them. If any of the requests return nodes that are closer to the target hash, the host sends FindNode requests to those nodes to try to get even closer. When the FindNode requests no longer return nodes that are closer, the search ends.

Once the search is over, the host takes the 8 closest nodes it found and sends a Store(target_hash) request to them. The nodes receiving this request store the fact that the host is a peer for the target hash.

Download

A client wishing to download a stream must first query the DHT to find peers hosting the blobs in that stream, then contact those peers to download the blobs directly.

Querying the DHT

Querying works almost the same way as announcing. A client looking for a target hash will start by sending iterative FindValue(target_hash) requests to the nodes it knows that are closest to the target hash. If a node receives a FindValue request and knows of any peers for the target hash, it will respond with a list of those peers. Otherwise, it will respond with the closest nodes to the target hash that it knows about. The client then queries those closer nodes using the same FindValue call. This way, each call either finds the client some peers, or brings it closer to finding those peers. If no peers are found and no closer nodes are being returned, the client will determine that the target hash is not available and will give up.

Blob Exchange Protocol

Downloading a blob from a peer is governed by the Blob Exchange Protocol. It is used by hosts and clients to check blob availability, exchange blobs, and negotiate data prices. The protocol is an RPC protocol using Protocol Buffers and the gRPC framework. It has five types of requests.

fixme: protocol does not negotiate anything right now. It just checks the price. Should we include negotiation in v1?

PriceCheck

PriceCheck gets the price that the server is charging for data transfer. It returns the prices in deweys per KB.

DownloadCheck

DownloadCheck checks whether the server has certain blobs available for download. For each hash in the request, the server returns a true or false to indicate whether the blob is available.

Download

Download requests the blob for a given hash. The response contains the blob, its hash, and the address where to send payment for the data transfer. If the blob is not available on the server, the response will instead contain an error.

UploadCheck

UploadCheck asks the server whether blobs can be uploaded to it. For each hash in the request, the server returns a true or false to indicate whether it would accept a given blob for upload. In addition, if any of the hashes in the request is a stream hash and the server has the manifest blob for that stream but is missing some content blobs, it may include the hashes of those content blobs in the response.

Upload

Upload sends a blob to the server. If uploading many blobs, the client should use the UploadCheck request to check which blobs the server actually needs. This avoids needlessly uploading blobs that the server already has. If a client tries to upload too many blobs that the server does not want, this may be consider a denial of service attack.

The protocol calls and message types are defined in detail here.

Reflectors and Data Markets

In order for a client to download content, there must be hosts online that have the content the client wants, when the client wants it. To incentivize the continued hosting of data, the blob exchange protocol supports data upload and payment for data. Reflectors are hosts that accept data uploads. They rehost (reflect) the uploaded data and charge for downloads. Using a reflector is optional, but most publishers will probably choose to use them. Doing so obviates the need for the publisher's server to be online and connectable, which can be especially useful for mobile clients or those behind a firewall.

The current version of the protocol does not support sophisticated price negotiation between clients and hosts. The host simply chooses the price it will charge. Clients check this price before downloading, and pay the price after the download is complete. Future protocol versions will include more options for price negotiation, as well as stronger proofs of payment.

                                                                                           
                                             ++                                            
                                           :+++++                                          
                                          +++++++++                                        
                                        '++++++++++++`                                     
                                      .++++++',++++++++`                                   
                                     +++++++    .++++++++.                                 
                                   ;++++++:       `++++++++,                               
                                  +++++++            ++++++++,                             
                                +++++++`               ++++++++:                           
                              ,++++++'                   ++++++++;                         
                             +++++++                       ++++++++'                       
                           '++++++,                          ++++++++'                     
                         `+++++++                              '++++++++                   
                        +++++++                                  '++++++++                 
                      :++++++;                                     ;++++++++               
                     +++++++                                         :++++++++             
                   '++++++.                                            ,++++++++           
                 .++++++'                                                ,++++++++`        
                +++++++                                                    .++++++++`      
              ;++++++,                                                       `+++++++      
            `+++++++                                                           `+++++      
           +++++++`                                                              ++++      
         :++++++;                                                               +++++      
        +++++++                                                               ,++++++      
      '++++++.                                                               +++++++       
    .++++++'                                                               '++++++,        
   +++++++                                                               `+++++++          
   +++++:                                                               +++++++            
   ++++                                                               ;++++++:             
   ++++                                                              +++++++               
   ++++      ++                                                    +++++++`                
   ++++      ++++                                                ,++++++'             .:   
   ++++      ++++++                                             +++++++     :'++++++++++   
   ++++      ++++++++                                         '++++++.       ++++++++++    
   ++++       :++++++++                                     .++++++'         .+++++++++    
   ++++         :++++++++                                  +++++++            ++++++++.    
   ++++           ,++++++++                              ;++++++:            :++++++++     
   ++++             ,++++++++                          `+++++++             +++++++++,     
   ++++               ,++++++++                       +++++++`            +++++++++++      
   +++++.               .++++++++`                  :++++++;            ,+++++++ +++;      
   +++++++.               .++++++++`               +++++++             +++++++    ++       
    ++++++++,               `++++++++`           '++++++.            '++++++:     ,'       
      ++++++++,               `++++++++`       .++++++'            .+++++++                
        ++++++++,               `++++++++.    +++++++             +++++++`                 
          ++++++++,                ++++++++.'++++++,            ;++++++;                   
            ++++++++:                +++++++++++++            `+++++++                     
              ++++++++:                +++++++++`            +++++++.                      
                ++++++++:                +++++;            ,++++++'                        
                  ++++++++:                ++             +++++++                          
                    ++++++++;                           '++++++,                           
                      '+++++++;                       .+++++++                             
                        '+++++++;                    +++++++                               
                          '+++++++;                ;++++++:                                
                            '+++++++'            `+++++++                                  
                              '+++++++'         +++++++`                                   
                                '+++++++'     :++++++;                                     
                                  ;+++++++'  +++++++                                       
                                    ;+++++++++++++.                                        
                                      ;+++++++++'                                          
                                        ;++++++                                            
                                          :++,                                             


Edit this on Github at https://github.com/lbryio/spec