Was trying to save 1 state by assuming the homepage will be in a busy state and the ad-detection code will finish first. But this is not true for those with a small Following count.
* Factor out lighthouse-result processing code for FYP re-use.
The FYP results will be in the same format as LH.
* Recsys: add ability to pass in specific uuid to use
For FYP, we want to pass the UUID as a param when searching for recommendations. The search comes before the recsys entry creation, so we need to generate the UUID first when searching, and then tell recsys to use that specific ID.
* Redux: fetch and store FYP
Note that the gid cannot be used as "hash" for the uri list -- it doesn't necessarily change when the list changes, so we can't use it to optimize redux. For now, just always update/render when re-fetched.
* UI for FYP
* Mark rendered FYPs
* Pass the FYP ID down the same way as Collection ID
Not ideal, but at least it's in the same pattern as existing code for now. The whole prop-drilling problem with the claim components will be fixed together later.
* Include 'gid' and 'uuid' in recommendation search
* Allow users to mark recommendations that they dislike
* Pass auth-token to all FYP requests + remove beacon use
beacons are unreliable and often blocked
* Only show FYP for members
* FYP readme page
* small fixes
* fyp
Co-authored-by: Thomas Zarebczan <thomas.zarebczan@gmail.com>
Ticket: 1079 Support geoblocking channels/videos
## Changes
- Replaced the .env version with iapi version.
- Includes 'videos' blocking and custom messages.
* Add last used collection to right click menu.
* Small fix for last used collection when it's a published collection.
* Update last used collection when a collection is pending or published.
* Small refactor to get the last used collection.
## Ticket
lbry-desktop 6841
## Issue
If you are already at the homepage and you click the "Home" or "Odysee" logo again, the entire page reloads, causing the whole startup sequence to re-run (lots of fetches).
This can be annoying when not intended (e.g. clicked too many times), as startup is slow for some and we also lose non-persistent Redux data (for debugging).
I believe the requirement was just to reload the homepage tiles, as they might be showing stale ones after a while. A full reload was the quick-and-easy fix.
## Approach
Best not to touch the complicated `ClaimTilesDiscover`, so just clear the search cache key in this scenario. `ClaimTilesDiscover` will then pick this up and perform a new `claim_search`.
- CommentsList needs to return a title with comment amounts
- mobile player dimensions needed to fill in the cover
- hid livestream header for now until figuring out a better presentation
- ~colum-reverse~ was causing problems with MUI's drawer scrolling, so reversed the chat order and made it ~column~ by default
- Hid bottom expand navigation if component not yet opened
- some other style changes in the middle
## Ticket
644 investigate following vs subscription preference data
## Issue
- iOS app uses colon for following/subscriptions.
- Front-end code handled the "colon vs. hash" for CHANNEL_SUBSCRIBE, but not for CHANNEL_UNSUBSCRIBE
* Add a setting to hide scheduled livestreams from home/following
* Add a hide button in the scheduled stream header.
* Fix typo + make sure pref is synced
## Issue
- Closes 592 Force clear stuck upload
- It was possible for an upload to stay "locked" e.g. when browser is killed.
## Change
When refreshing or opening a new tab, always clear the locks. The on-going sessions will re-lock them immediately.
- Query for that tag in the upcoming section
- Improve special tag organization
- Filter out the internal tags in the UI
- Add missing types to publish state
## Repro
1. Follow a channel.
2. When `preference_set` is sent, unfollow the channel.
3. A few seconds later, the final setting reflects (1) instead of (2).
The current sync loop involves doing a final `sync/get` at the end. While not necessary for the scenario above, the code flow covers various cases, so it's still needed for now.
## Approach
Implement an abort mechanism to the sync-loop.
When syncing from the `buildSharedStateMiddleware` loop, generate an ID for each sync session, and only store the latest one. Pass the ID to the completion-callback (and other places as needed), so we can check if our session is still the latest one before executing the callback.
The check for invalidation can also be placed in more places to cut off the sync process earlier, but it's only done for 2 critical places for now.
## Repro
- Do a search like "Test" and filter to "Channels Only".
- Follow a bunch @test channels
- Unfollow any one of them. All of them gets unfollowed.
## Notes
The change in b9fc9b63 to compare the lower-case channel name probably made it even worse, since "@TeSt" would be removed too.
## Change
Not sure why channel name was used in the first place ... perhaps it was to cover canon vs perm uri?
Anyway, comparing uri makes more sense, so doing that instead.
## Issue
Apparently, a user is experiencing 423 locked errors from the server, which should not happen given the locking mechanism plus the user wasn't trying to do concurrent uploads.
## Fix
Anyway, fix the Resume button so that at least they can try to resume.
* Upload: fix redux key clash
## Issue
`params` is the "final" value that will be passed to the SDK and `channel` is not a valid argument (it should be `channel_name`). Also, it seems like we only pass the channel ID now and skip the channel name entirely.
For the anonymous case, a clash will still happen when since the channel part is hardcoded to `anonymous`.
## Approach
Generate a guid in `params` and use that as the key to handle all the cases above. We couldn't use the `uploadUrl` because v1 doesn't have it.
The old formula is retained to allow users to retry or cancel their existing uploads one last time (otherwise it will persist forever). The next upload will be using the new key.
* Upload: add tab-locking
## Issue
- The previous code does detect uploads from multiple tabs, but it was done by handling the CONFLICT error message from the backend. At certain corner-cases, this does not work well. A better way is to not allow resumption while the same file is being uploading from another tab.
- When an upload from 1 tab finishes, the GUI on the other tab does not remove the completed item. User either have to refresh or click Cancel. Clicking Cancel results in the 404 backend error. This should be avoided.
## Approach
- Added tab synchronization and locking by passing the "locked" and "removed" information through `localStorage`.
## Other considered approaches
- Wallet sync -- but decided not to pollute the wallet.
- 3rd-party redux tab syncing -- but decided it's not worth adding another module for 1 usage.
* Upload: check if locked before confirming delete
## Reproduce
Have 2 tabs + paused upload
Open "cancel" dialog in one of the tabs.
Continue upload in other tab
Confirm cancellation in first tab
Upload disappears from both tabs, but based on network traffic the upload keeps happening.
(If upload finishes the claim seems to get created)
* Add remove_duplicates to tile/list claim_search except for Channel Page
This removes the any duplicates from reposts.
* Re-activate the "Hide reposts" setting
* Category Rows: default to ['stream', 'repost'] unless specified otherwise.
## Issue
When the muted list was being cleared from another app, the web version ended up restoring the previous muted list.
## Change
- As long as `blocked` is defined, return that since an empty array is a valid result.
- If undefined, something went wrong when calling the reducer, so retain the muted list. I believe this was the original intention of that line.
## Issue
If you make 2 claims from the same source file, the second upload thinks it's trying to resume from the first one. They should be unique uploads.
## Approach
Stash the upload url for comparison when looking up existing uploads to resume.
Stash that in `params` to minimize code changes. We'll just need to ensure it is cleared before we generate the SDK payload.
* Publish button: use spinner instead of "Publishing..."
Looks better, plus the preview could take a while sometimes.
* Refactor `doPublish`. No functional change
This is to allow `doPublish` to accept a custom payload as an input (for resuming uploads), instead of always resolving it from the redux data.
* Add doPublishResume
* Support resume-able upload via tus
## Issue
38 Handle resumable file upload
## Notes
Since we can't serialize a File object, we'll need to the user to re-select the file to resume.
* Exclude "modified date" for Firefox/Android
## Issue
It appears that the modification date of the Android file changes when selected, so that file was deemed "different" when trying to resume upload.
## Change
Exclude modification date for now. Let's assume a smart user.
* Move 'currentUploads' to 'publish' reducer
`publish` is currently rehydrated, so we can ride on that and don't need to store the `currentUploads` in `localStorage` for persistence. This would allow us to store Markdown Post data too, as `localStorage` has a 5MB limit per app.
We could have also made `webReducer` rehydrate, but in this repo, there is no need to split it to another reducer. It also makes more sense to be part of publish anyway (at least to me).
This change is mostly moving items between files, with the exception of
1. An additional REHYDRATE in the publish reducer to clean up the tusUploader.
2. Not clearing `currentUploads` in CLEAR_PUBLISH.
* Restore v1 code for livestream replay, etc.
v2 (tus) does not handle `remote_url`, so the app still needs v1 for that. Since we'll still have v1 code, use v1 for previews as well.
It's technically incorrect and was causing the GUI to not update sometimes because the reference did not change, despite the array contents did. The GUI just happens to update most of the time due to other state changes.
## Issue
- selectMyActiveClaims memo problem -- being recalculated on every click -- high workload for wallet with large uploads.
- Mistake in handling abandoning IDs (it was trying to extract keys from an array)
## Changes
- selectAbandoningIds: never use `state` as an input selector. Breaks memo.
- Don't use selectMyClaimsRaw and then reduce it back to IDs. Use selectMyClaimIdsRaw instead.
- selectAbandoningIds is already in array form, so don't run Object.keys.
- Fix abandoningById never clearing when succeeded.
* Don't update 'pendingById' if no changes.
'pendingById' isn't frequently updated, but using it as a proof-of-concept to fix how reducers should be written to avoid unnecessary updates.
ImmutableJS apparently does all of this for us, but there are cons to using it as well, so using own wrappers for now.
* Don't update 'byId' if no changes + add 'selectClaimWithId'
## Ticket
116 Claim store optimization ideas (reducing unnecessary renders)
## Changes
- Ignore things like `confirmations` so that already-fetched claims aren't invalidated and causes re-rendering. The `stringify` might look expensive, but the amount of avoided re-renders outweighs it. There might be faster ways to compare, though.
- With `byId[claimId]` references more stable now, memoized selectors can now use 'selectClaimWithId' to pick a specific claim to depend on, instead of 'byId' which changes on every update.
* Fix memo: selectMyChannelClaims, selectActiveChannelClaim
## Issue
These should never recalculate after `channel_list` has been fetched, but they do because of poor selector dependency.
## Change
With the `byId` changes from the previous commit, we are now able to memoize these selectors correctly.
## Issue
We previously automatically reload when there is a chunk error. This works fine if it's the case of new code was pushed recently while the user was active. But if the failure was caused by other things like network problems or the file IS actually missing, we end up in an infinite loop of refreshes.
## New approach
Tell the user to reload instead of automatically doing it.
followedTags:
- Moved the filtering to the reducer side, so that we don't do it every time. We can't rely on `createSelector` because the store will be invalidated on each `USER_STATE_POPULATE`, unfortunately.
tags:
- Memoize via re-reselect for the "ForUri" selector.
## Issue
Components render unnecessarily due to reference invalidation from `selectMutedChannels` selector.
## Notes
`selectMutedChannels` run and return a new reference each time the app gains focus. `createSelector` will not help in this case, because we are indeed invalidating the data in the store in `USER_STATE_POPULATE`.
## Changes
- Don't update the state if the array is identical in content.
- Fixed `selectMutedChannels` to return the reference from the store, so `createSelector` is not needed.
- Also, the filtering is not needed because we've already done it in the reducer.
## Comments
I've done some profiling on large blocklists. The time needed for the array comparison is still an order magnitude lower than the time needed to render all the Components that got incorrectly marked by this.
The ideal solution is for the sync code to return a hash or timestamp of the array, so that we can compare that instead of the array.
