(1) The GUI currently behaves such that if MinTip is set, MinSuper will be ineffective. However, Commentron actually checks MinSuper first. Just zero out MinSuper for now to enforce our desired behavior.
(2) Add debouncing to numerical settings. Refresh everything during onBlur to always reflect what's in server (e.g. in case there was an error).
To avoid calling `setting.Get` excessively, we'll fetch the latest settings one last time before sending a tip. We'll also fetch in several areas, like when a comment action fails (most likely creator just enforced a minimum).
This will be easier when websocket send an update.
## General
- `setting.List`: returns full creator settings. Requires signature (i.e. you own the channel)
- `setting.Get`: returns a public subset of the creator settings. No signature required, and it is mainly used by the GUI to determine the constraints of a channel (e.g. comments enabled? min tip requirements? etc.). Does not include private settings like "blocked words list".
`doFetchCreatorSettings` will handle both of these. Clients that uses the stashed results (`settingsByChannelId`) just needs to be aware the result might not contain everything, depending on whether you own the channel or not.
## Misc Related Changes
- Finally fix the reducer for COMMENT_FETCH_SETTINGS_COMPLETED to not purge the data on each call.
- Change `doFetchCreatorSettings` to operate on a single channel instead of multiple. We ended up not using the multple mode anyway, so it was wasteful code trying to batch the promises.
- `commentsDisabledChannelIds` is no longer needed. Previously, this was created just to differentiate between Creator (full) and Channel (subset) settings. It's cleaner to just use one object, so eliminated this.
- Remove unused 'commentingEnabled'.
## Aside
- There are now 2 ways to know if a channel has disabled comments: (1) from `comment.list` and `setting.Get|List`. Both of them updates `settingsByChannelId`, so it'll still be a single place for the GUI to check against.
## Issue
> 5459 Add setting for changing your comment server. Visible on desktop (and possibly defaulting to Odysee URL), hidden on odysee.
## Comments
Not sure how this would actually work properly without the user recompiling the app to handle server differences. For example, even when we use our own server but switch between v1 and v2, some code changes are need to handle the differences. At that point, it seems easier for the user to just change the .env file? Anyway...
## Changes
- Added Desktop-only options to define custom server. [Settings > Advanced Settings > "Comment server" section].
* fix frontend bug
* show superchats in order properly
* scroll properly when switching tabs
* calculate fiat tips properly
* sum up lbc amounts
* refactor code a bit remove why isnt this working bit
* bugfix cant tip fiat if no lbc balance
* add toast when someone does a tip for a comment
* add error toast for card page
* show error on account connection page
* automatically truncate to two decimals
* close to working perfectly
* show decimals value better
* increase size of input value
* one bug left but almost working perfectly
* reverse so newest transactions come first
* fixing bug caused by floating point precision
* eslint fixes
* remove unused conditional
* get stuff ready for merge
* bugfix and cleanup
* requested changes
* fixing flow errors
* fix last flow error and touchups
* fix i18n and remove logs
Co-authored-by: Anthony <contact@anthonymayfield.com>
* raw ingredients done adding functionality
* essentially working just need a cleanup
* almost working with a couple bugs
* almost working but a bug or two
* seems to be working well
* seems to be working well but needs a cleanup
* couple of bug fixes
* basically working now cleaning up
* seems to be working pretty well
* cleanup unnecessary changes
* eslint fixes
* bugfix seek event
* bugfix and andrey fix and better docs
* getting ready to add last piece of functionality
* handle seek events properly
* add dynamic duration to calculate interval properly
* fix lint errors
* last couple changes
* only run watchman with analytics on and on prod
* flow fixes
Co-authored-by: zeppi <jessopb@gmail.com>
## Issue
6832: Pass through commenting error if it fails current error list
## Changes
- Refactor the error-msg-replacing code to make it easier to add new ones in the future.
- Made the new error message localizable (i.e. extract the variable value, pass to `__()`)
- Fallback to Commentron original message for those unhandled ones (usually fresh messages from Commentron).
Renamed variables for clarity while at it.
"Item added to %name%" is probably redundant due to toast passing through <i18nMessage>, causing a double translation.
Anyway, added all the resolved string for now to avoid them popping up in app-string during development.
Previous:
~~Although it was collecting info for all platforms, the data is only sent for Odysee.~~ Correction: it became enabled for all platform after `master` became Odysee.
New:
Only send out the telemetry for `IS_WEB` or if there's user consent.
## Issue
6366 Recsys Evaluation Telemetry
The recommended list from lighthouse is obtained from `makeSelectRecommendedContentForUri`. This list is further tweaked by the GUI (e.g. move autoplay next item to top, remove blocked content, etc.). Recsys wants the final recommendation list and the clicked index (in exact order), so we need pass these info to the videojs recsys plugin somehow. Also, Recsys wants a recommendation list ID as well as the parent (referrer) ID, we so need to track the clicks and navigation.
## General Approach
- It seems easiest to just spew back the final (displayed) list and all the required info to Redux, and the recsys plugin (or anyone else in the future) can grab it.
- Try to touch few files as possible. The dirty work should all reside in `<RecommendedContent>` only.
## Changes
- `ClaimPreview`: add optional parameters to store an ID of the container that it is in (for this case, it is `ClaimList`) as well as the index within the container.
- When clicked, we store the container ID in the navigation history `state` object.
- For general cases, anyone can check this state from `history.location.state` to know which container referred/navigated to the current page. For the recsys use case, we can use this as the `parentUUID`.
- `ClaimList`: just relay `onClick` and set IDs.
- `RecommendedContent`: now handles the uuid generation (for both parent and child) and stores the data in Redux.
## Issue
6721 Notifications: Thumbnail for "new content" not showing up in Desktop layout
## Change
The `className` wasn't propagated during the `FileThumbnail` refactoring to `Thumbs`.
## Issue
In the Channel Page, if the _Collections_ `claim_search` comes in after the main content's `claim_search`, the Collection's `ChannelContent` is being re-rendered despite not being in the active Tab. This causes a 0.4 CLS score (it's ridiculous that invisible components are taken into account). Apparently 41% of users are hitting this scenario, causing a poor aggregate.
## Change
Don't mount the `ChannelContent` components unless its tab is the active one. It doesn't seem like Reach Tab hides components under the inactive tab.
No functional change; just thought this is cleaner (group up the constants) and easier to type via IDE auto-complete, at the expense of creating an extra object.
## Issue
Creating Settings suddenly start to stop loading correctly for some of my channels.
## Change
`settings.List` now returns null instead of empty array. Double-checked the Commentron repo and this is indeed the case.
Updated the code to handle null.
## Issue
Closes 6490
Embeds in https://lbry.com/news/2002dtf was crashing in incognito
## Change
Ensure localStorage is available before using it. Jessop warned me before...
## Issue
6068 Fix "Cumulative Layout Shift" for Core Web Vitals
In Posts, the Comments section appears first while we fetch the MD file. When the MD is fetched, Comments get pushed to the bottom (or shifted up for short posts), hence the red CLS scores.
## Approach
There are too many layers between `<FilePage>` and `<DocumentViewer>` to pass the `loading` state around to hide the Comments section, so just make Comments fade in after a 2s delay.
## Changes
- Posts: Add 2s fade-in delay to Comments.
- Posts: remove the gray placeholder. This improves the score a bit more, and reduces flicker as well. There's already a spinner from `FileRenderInline` to tell the user to be patient.
- Posts: add a minimum 30vh height so that short posts don't get collapsed too much, causing the `FileDetails` and Comments to shift. Small shifts are fine as long as CLS is below 0.1.
## Issue
6542 Livestream listing and blocked list kills CLS score
This is basically a repeat of what was done on `claimTileDiscover` (homepage), but now on `claimListDiscover` (category pages).
This handles the unnecessary re-render when:
- the uri list temporarily being zero while waiting for new claim-search results.
- livestream claim-search invalidating the list.
## Changes
Store the last uri list and use that when we know that claim-search is still not done.
## Tests
1. Ran Lighthouse on category pages (force a livestream channel on it). CLS score must be green.
2. Block `claim_search` from Dev Tools and move to another category. The page should say "timed out" instead of "no results" (i.e. maintain existing behavior).
## Issue
6589
## Notes
`parseURI` will return `isChannel=false` due to the reposted channel URL not having the '@' symbol.
Since we already have the claim object, check `value_type` directly instead.
Pop up Menu Fixes and Improvements
Improve re-directs
Fix file deletion
Improve code, and more
Fix List Layout collection popup
Allow to edit list
Fix blocking when not logged or no channel
Fix Edit and Delete showing for not owned Lists
Fix actions breaking when not logged in
Fix List options not showing
Lint
Shorten logic
Lint
Recently changed to `<OptimizedImg>`, which was assuming the `src` never changes.
dejavu ... we also hit this issue when implementing the `IntersectionObserver` lazy-loading.
Objective:
- Get appropriately sized images to improve performance and Core Vitals score.
- Ensure images using "objectFit=cover" doesn't get stretched out if the source is large enough.
- Peg to 100px increments for better caching.
Notes:
- Skip images hosted in '/public'. If we really want to optimize it, then we'll need to provide the full path in the code, otherwise CDN lookup will fail.
If there are no API errors but no reactions returned, consider the requested IDs as "done" and stop requesting again. When a channel is being confirmed, Commentron doesn't return the reaction object.
Also added extra guard in case Commentron does return an object in the future, but an empty one.
- use `selectActiveChannelClaim` as that takes the current channel list into account (i.e. correct state when all channels are deleted).
- `selectActiveChannelId` should probably be removed or not exposed through a selector, as it is not updated when channel list changes?
## Issue
6068
## Change
Lock all images to fit a 16:9 container. We have implemented 'ZoomableImg', so no reason in trying to display in full size.
This reduces CLS from 0.4xx to 0.01x.
## Flaws
CLS could probably be zero if not for the spinner shifting things slightly. Also, mobile CLS is 0.07.
The troublesome part in this PR is that FileRenderInitiator, FileRender and their subcomponents are broken apart and it's hard to synchronize their visibility and size. There are time gaps where none of them are visible, etc.
This PR only tackles the major part (most bang for buck), which is the elimination of variable height of the rendered image.
## Aside
I think `claimIsMine` is unused, so don't waste time requesting it.
show visible card and add remove card button
show your transactions even if you dont have a card
fix presentational issues
show your transactions even if you dont have a card
fix presentational issues
add link to channel section
update yarn
show donation location
add remove card modal still needs completion and also changed how stripe is used on settings stripe card page
add confirm remove card modal to router
move bank account stuff to settings page
move account functionality to settings page
continuing to move account transactions to settings
list transactions for creator
updating copy
touchup tip error
do a better job autofocusing
bugfix
show an error on the card page if api returns 500
building out frontend for comment tip
display dollar sign if its a fiat tip
more frontend work
more frontend work
more frontend bug fixes
working with hardcoded payment intent id
working but with one bug
bugfixed
add toast if payment fails
add add card button
cant get claim id but otherwise done
more frontend work
call is working
show fiat for livestream comments
add is fiat on comments
round and show values properly
dont allow review if tiperror
copy displaying properly
disable buttons conditionally properly
remove card button working
remove card working with a workaround by refreshing page
bugfix
send toast when tip on comment
jeremy frontend changes
only show cart on lbc
In the event that Commentron returned an empty object, we'll end up re-requesting the same IDs again. Haven't seens this happen before, but since we don't know what's causing the spike, we'll just consider failures and "fetched" to stop the loop.
User can always click Refresh to repopulate the values.
Not sure if this will ever occur, but technically possible from the code point of view. Try adding this to see if it stops the spikes in `reaction.list` calls.
Someone mentioned about odysee.com showing "tip" related text when supporting own claim. Now it should default to "Boost" related text for own claims.
L167: Not edited but not sure if "claimIsMine" is needed there any more.
add watch later hover action
replace watch later popup item for favorites
lint
styling for watch_later overlay
Add label
Use just claim, add requiresAuth
Add list icon
Tone down text
Turn WL Hover Button into component
Change WL hover icons
small revert
Keep watch later in the menu
## Issue
- `Comment.replies` currently represent all replies, while `comment.List` returns a filtered version, so the actual replies could be less.
- The actual replies is represented by `total_filtered_items`, but we only get that after making a fetch. So, users could click "Show more" but get nothing.
## Fix
- Stop showing "Show more" based on `total_filtered_items`.
- If there is a balance, display 1 dummy comment to represent all blocked replies. This handles the case of "Show more" being displayed but ended up with 0 replies if all replies were blocked.
## Future
Note that `Comment.replies` might be changed to represented filtered comments in the near future (refer to Beamer), so the GUI is made such that the dummy just won't appear when that change happens.
Seeing the spinner too much can be annoying.
- This approach works, but currently, when the list is very long, something is taking up resources and the handler couldn't be processed, so the effect is lost (still seeing the spinner). See 6473.
- Since we are now prefetching, bumped the debounceMs a bit.
## Issue
6414 <Don't use "exact match" setting outside of main search - cuases no results in related>
`doSearch` was used in Wunderbar and Recommended, but it was adding in Wunderbar options all the time.
## Changes
- Fix `doSearch` to not use hardcoded options (take from arguments).
- Refactors the searchOption-creation code so that we don't duplicate the logic in both .js and .jsx.
