* Add ICON.INFO - "i" within a circle.
Basically, an inverted ICON.ALERT.
* Posts: restore "Tip unlock | Claim details" component
## Issue
5882: tip unlock + claim id detials missing from markdown posts view
## Notes
The easiest solution would be to put `FileDescription` into posts, but I think that goes against the clean up of the Post layout, where the focus should be on the content. The faded style of the File Details section seems too distracting, plus we don't want the File Description anyway.
Fixed by:
- Make the existing "LBC amount" clickable to show credit details. An additional padlock will appear if the content is yours and you have tips to unlock.
- Add an "info" icon beside it to show file details.
These "link" buttons are usually lit, but I dimmed it in this case to make them stand out less. Again, focusing on Post content instead of buttons.
* Show full notification text via tooltip
The tooltip fixes the system notifications problem (mentioned below), and also allows one to quickly read the entire comment without actually having to visit the comment.
Currently, we only show about 50 characters in the notification, truncating it to an ellipsis when exceeded.
This is not much of a problem for dynamic text (e.g. comments) since the full text can be seen after clicking on the notification (brings you to the comment). For system notifications, this is problematic since there's no other way to know what the full text was.
Tried to dynamically change the font size to auto fit, but it wasn't fruitful. Even if it did work, it'll probably won't be legible for a 2000-character comment, plus the entire list will look weird with various font sizes.
* Beautify "missed out" notification; bring user to Verify page.
## Issue
6021: Notifications: Missed Out
## Changes
- The notification already brings the user to the `/rewards`. Tweaked it to directly enter the Verify Page.
- Use LBC icon instead of generic bell for this notification.
* Fix ability to delete own comments in livestream
## Issue
5832: can't remove own comments in live stream mode (if you have multiple channels?)
Looks like it was just missing `commentIsMine` for the new component.
* Disable editing livestream comments
It doesn't do anything at the moment, anyways.
* Disable deleting hyperchats
The "total tipped" will get deducted when hyperchats are deleted, which doesn't make sense (doesn't reflect actual total that the creator received).
* Swap: populate 'status' from 'btc/swap' response instead of waiting for first websocket input.
## Issue
Clsoes 5975: swap stop at processing even though response comes through
## Notes
Occasionally, the first websocket message doesn't come through (seems like the commerce didn't send?). There's really no need to wait for one more 'status=NEW' message to ensure the right data is being populated (being over-cautious here).
* Beautify the "exact amount" advice.
Scenarios where active livestreams will not appear:
- creation date is way back.
- homepage section options excludes livestreams.
Make an explicit `claim_search` but with `has_no_source` if the client wants `liveLivestreamsFirst`.
If there are lots of channels with livestreams, there's a possibility that the final list will be larger than what was requested. We could trim it to be within the original `options.pageSize` range, but I left that out for now.
It would have been a clean implementation through `renderProperties`, but due to the need to adjust the opacity of `claim-preview__file-property-overlay` (the parent elemtn), I ended up having to create a new `live` attribute.
Differences with the original from 'livestreamList/view.jsx':
- Returns null instead of an empty object for the empty case. This removes the need for clients to create a temp array to determine if the list is empty ('Object.keys(x).length').
- Allow option to not periodically refresh by setting the interval to 0.
While looking at the next RC, I noticed the new languages were lost. I recall the new language commit included some refactoring which had to be reverted due to some webpack issue.
Re-add those languages in the old (non-refactored) method.
## Issue
One of the items in 5865 Video shortcut issues
This one is not really an issue, but it would be nice to match what the arrow keys are doing. Also, in slower regions, seeking 10s will almost always end up buffering.
## Issue
Channel links were showing the "This channel isn't staking enough LBRY Credits for link previews." -- channel links shouldn't be showing previews in the first place.
## Change
Moved the logic into `ClaimLink`, which is the better place to put it anyway. I think I was trying to not touch as many components as possible (i.e. not passing `allowPreview` down too many layers) in the initial implementation. This caused the `isChannel` consideration to be missed.
These only work in the `selectThumbnail` component. If it's small enough, it'll get past the transaction limit-check, but ultimately it doesn't appear correctly in the claim list.
It'll probably appear correctly if we tweak the ClaimPreview code, but since this also fails the Google Video metadata test, I think we should disallow this.
## Issue
5923
Thumbnail errors were just being used in `selectThumbnail`. The form doesn't know about it and was using allowing invalid thumbnails like 'helloworld' to pass through.
I believe the rest of the GUI is setting 'thumbnail'.
'thumbnail_url' is only populated right before publishing.
So, the flag was always false -- we just never see the error on screen because the component is incorrectly hidden (fix for this is coming up next...)
* FileExporter: add 'fetch' hook + Web support
* Re-add ability to export transactions
Closes 4793: Export Wallet History For Taxation Purposes
* Move file-creation to the background.
Don't let the file-creation process block the GUI.
Requires lbry-redux update.
* Bump redux | doFetchTransactions: bump pageSize to 999999; remove doFetchSupport
* bump redux
Co-authored-by: Thomas Zarebczan <thomas.zarebczan@gmail.com>
* CopyableText: add 'onCopy' for clients to change the text-selection
* Swap: only copy the amount (without currency)
## Issue
5873: Rounds 2 of LBC swaps
## Notes
It was an intended feature to include the currency -- I can paste the full string into my note book, while pasting into wallet apps like Exodus will automatically trim off the currency anyway.
Regardless, removed the 'feature' :D
(1) Due to IAPI/commerce query limit, and also to not pollute the wallet with infinite chargeCodes, we'll only show the last 10 swaps. Beamer mentioned that it's possible to tracked back the past chargeCodes of the user, and potential provide a `list` endpoint to handle disputes.
(2) If a user explicitly removed an entry, don't repopulate that entry even if websocket returned an updated status for it. While it might be useful to handle accidental removals, it looks weird when the list gets repopulated with 'Expired' entries.
(3) Add sanitization when repopulating the chargeCodes from the wallet data (i.e. remove 'null' entries).
(4) Always repopulate the list per wallet data so every instance looks the same.
- For the active swap, switch from polling to websocket. The returned data is now the Charge data from the commerce, so some parsing will be required.
- Allow the user to send other coins that the commerce supports.
- Only save the 'chargeCode' to the wallet. The other data can be repopulated from this.
- Store the receipt currency. I'm not sure if the commerce supports sending bits from various coins. Take the coin that came with the 'COMPLETED' message for now.
- Fix 'lbc' calculation to match IAPI side.
- Allow users to see full detauls from "View Past Swaps".
- String cleanup
- GUI cleanup.
While it would be nice if we can swap anonymously through Desktop, the IAPI will tie a wallet address with an account. Final decision is to require authentication.
- Users should be able to see the entered and promised amount, otherwise they might forget how much to send over.
- This change also prepares for the future upgrade to support multiple coins.
## Issue
- Patch for 5316: "Home and End keys not working in search box"
## Notes
Seems like 'shift+home' wasn't highlighting the text. 'shift+end' works.
Was pretty sure I tested that previously. Anyway, adding the direction variable seems to fix it.
- The icon makes the screen too busy when there are lots of images in a page.
- Use src as the last resort for the text (I though `title` and `alt` was mandatory in markdown; apparently not).
- Re-organize the return statement of 'NotificationsPage' a bit, otherwise the entire page will reload (blink) every time the drop-down value is changed due to the 'fetching' flag.
- Retained the original behavior of (only showing a blank page + spinner) on the very first load. I think there is merit in not showing the buttons immediately (e.g. when not logged in and `/$/notifications` is accessed directly).
Initially, the filtered list was done at the component level, and the list was simply a subset of `notifications`. But due to the limit issue explained in 5694, we now query the filtered list instead.
Considerations:
- The filtered list could contain items not listed in the 'All' list. We could add a string at the bottom of 'All' that says "not all items retrieved" if this confuses the user.
- The unseen count needs to be based on 'All' and not the filtered one, so that data needs to be stashed somehow (can't re-use the array).
Use 2 arrays for now instead of trying to accumulate "all" and "filtered" into 1 array.
## Issue
4945: Simplify / revamp search filters for odysee (and lbry.tv)
## Changes
- Tweaked the "claim type = file | channel | everything" a little to hopefully make it more intuitive.
- Added "Sort By".
- Added "Upload Date".
- Fixed the affected files to handle both Desktop and Odysee.
- Tweaked the layout to be more condensed so that we can see some results as we change the filter.
- Added animations.
- Added "Exact match" option that helps user to surround with quotes.
- This change makes it work for both Desktop and Odysee. When merging back to Odysee, just take the file from `master` (barring any changes from someone else).
- Given that we'll be opening up the search filter for Odysee, the only "simple site" customization that was back-ported is `free_only=true`.
## Issue
- Redo 5636: Disable video previews in comments/posts made by channels below a certain channel staked level
- Closes 5738: expand video preview level requierment to markdown images also
I think using the 'values' for the keys should be fine since each language name is unique. A key-clash would also help us catch mistakes like not differentiating sub-languages if support any (e.g. "English" vs. "English (British)")
Had to cast to String for lint.
- SUPPORTED_SUB_LANGUAGE_CODES[] that I introduced was pretty redundant when SUPPORTED_LANGUAGES[] already hold the information. The logic to ignore sub-languages (i.e. reduce the locale's "en-GB" to "en" is now located in getDefaultLanguage()).
- SUPPORTED_BROWSER_LANGUAGES[] and SUPPORTED_LANGUAGES[] look so similar and hard to tell what the former is for at first glance. The functionality to map 'zh-CN' to 'zh-Hans' is now handled by resolveLanguageAlias(), which makes the intention clearer.
This leaves us with a single list -- SUPPORTED_LANGUAGES[], whose key also tells us the desired language code to use.
Also, clients now need to call `resolveLanguageAlias` to map any language code aliases, as they differ depending on how it is queried (e.g. `navigator.language` vs. `app.getLocal()` uses different standards).
I think we no longer need to explicitly migrate existing user's 'zh-CN' into 'zh-Hans' because the rest of the system will always use the desired language code as long as 'resolveLanguageAlias' is called appropriately. e.g. the system uses `selectLanguage` and `selectLanguage` calls `resolveLanguageAlias`.
## Issue
Closes 5811: Video-embed in markdown-post is broken
- Revert "Fix 'makeSelectIsPlaying' to look at 'playing' instead of 'primary'." dabdc980a1.
- Revert "Fix 'isPlaying' to reflect 'playing' instead of 'primary' URI" 351890decf.
Reverting means "Deleting MD from downloads list causes spinning icon to run forever 4959" gets re-opened, but this is a way less severe issue to leave in.
Closes 5000: AutoPlay in Floating Player only works one time
Factor out the code that queries the recommendation. It needs to be called in two places:
(1) `RecommendedContent` - need to cover the case of floating player + visit another video page.
(2) When video is floating and autoplayed the next video.
## Issue
Closes#5720: Edit: channel-selector should re-populate with original channel
## Notes
'incognito' was not set to false, causing the 'ChannelSelector' to select Anonymous.
- remove anon option in channel dropdown when livestream tab is selected
- attempt to fill publish form with current active channel name just prior to publishing to (edge condition)
- edge condition occurs when user fills out form fully. User switches to Post (which allows anon in drop down selector). User selects Anon channel, then switches back to the livestream tab. The form was previously updated with `channel: undefined` but does not get changed when clicking the livestream tab. So we just updated the form one last time prior to publishing as a livestream
- Show most recent livestream claim on livestream setup page instead of first livestream claim
## Issue
Closes 5721: Publish-Preview updates
## Changes
(1) Match the recent "incognito" change that sets the channel to `undefined` via `updatePublishForm`. This change would also cover `null` -- I don't think it's being used to represent something else, so showing "Anonymous" for `null` should be fine.
(2) Added channel icons, so it'll be more obvious to the user if they accidentally selected the wrong channel.
## Issue
Closes 5687: Ensure post mode has no text limit
## Changes
- `type="markdown"` can now have unlimited length if clients don't define `textAreaMaxWidth`.
- The internal default limit of 2000 is narrowed down to `type=textarea`.
## Issue
Closes 3661: Autoplay + Related go into loops ( infinite ) sometimes
## GUI
Push the actual "next" item into the top of the list.
## History search
1. Skip if the next item is itself.
2. The URL stored in the history comes in various forms, so a direct comparison won't work.
- There's also a weird case where the URL differs by just a little (p.09 vs p-09), but with the same claim ID:
lbry://vacuum-tube-computer-p.09-–-building#5212bc8bc63c373e2bf1ebc5b765595ed7b6514d
lbry://vacuum-tube-computer-p-09-–-building#5212bc8bc63c373e2bf1ebc5b765595ed7b6514d
Check the claim_id as well to cover cases like these.
## Issue
Closes 5537: Allow youtube sync new pass language to api
## Notes
- Default language for the selector comes from browser (`navigator.language`)
