This stores the hash for the last viewed announcement.
The intention is so that the announcement won't re-appear when logging into another device.
However, this does mean that announcements would need to wait until the first sync to decide whether to appear or not, which can be quite a delay.
* Redesign threadline and fetching state
- threadline goes right below channel avatar, mimicking reddits implementation, has a increase effect on hover and is slimmer, creating more space for comments on screen
- fetching state now replaces show/hide button, also mimicking reddit, and now says that it is loading, instead of a blank spinner, and also improves space a bit
* Redesign comment threads
- Allow for infinite comment chains
- Can go back and forth between the pages
- Can go back to all comments or to the first comment in the chain
- Some other improvements, which include:
- add title on non-drawer comment sections (couldn't see amount of comments)
- fix Expandable component (would begin expanded and collapse after the effect runs, which looked bad and shifted the layout, now each comments greater than the set length begins collapsed)
- used constants for consistency
* Fix replying to last thread comment
* Fix buttons condition (only on fetched comment to avoid deleted case)
* Fix auto-scroll
* Bring back instant feedback for Show More replies
* Improve thread back links
- Now going back to all comments links the top-level comment for easier navigation
- Going back to ~ previous ~ now goes back into the chain instead of topmost level
* Clear timeouts due to unrelated issue
* Fix deep thread linked comment case and more scroll improvements
* More minor changes
* Flow
* Fix commentList tile style
* Fix long channel names overflowing on small screens
* More scroll changes
* Fix threadline
* Revert "Fix long channel names overflowing on small screens"
This reverts commit e4d2dc7da5861ed8136a60f3352e41a690cd4d33.
* Fix replies fetch
* Revert "Fix replies fetch"
This reverts commit ec70054675a604a7a5f3764ba07c36bf7b0f49c8.
* Cleanup and make smooth
* Always use linked comment on threads
* Cleanup
* Higlight thread comment
* Fix comment body styles
We were already limiting the call to once-per-5-minutes (for the succesful case), so just need to put failure cases into the mix.
Retry 3 times before stopping.
- Corrected flow definitions.
- Properly differentiate between "not yet fetched" and "no membership" as "undefined" and "<empty string>", respectively. There are GUI elements that need to know the unfetched case.
Mainly only useful for Wild West, which doesn't use `channel_ids` (otherwise, the homepage maintainer could just exclude the id from `channel_ids` directly).
pinnedUrls = resolve
pinnedClaimIds = claim_search
Make `pinnedClaimIds` take precedence for now, since the homepage is defining both to support Android.
For some reason, I previously made `pinnedUrls` the priority, thinking this should be the "correct" one to use when the SDK is fixed.
Expanded homepage pins to support 2 types of input (if both are passed in, pinnedUrls take precedence):
(1) pinnedUrls --> uses doResolveUris (resolve)
(2) pinnedClaimIds --> uses doResolveClaimIds (claim_search)
Instead of injecting the pinned URLs directly, we inject from `resolvedPinUris`, which will be blank until the uris are resolved, thus preventing it from being resolved individually from the tiles.
There's additional complexity with the `claim_search` method, as the rest of the code deals with uris instead of IDs. Fortunately, it's all contained with `useResolvePins`, so removal would be easier when the batch `resolve` issue is fixed.
- Add close button to allow immediate dismissal.
- Add ability to support sub messages. Will be typically used for error codes, etc.
- Add ability to define 'long' auto-dismiss duration (15s) vs. the default of 5s.
- I didn't add 'off' because there is a comment saying that this scenario should use the Error Modal instead, so respecting that for now.
* Factor out lighthouse-result processing code for FYP re-use.
The FYP results will be in the same format as LH.
* Recsys: add ability to pass in specific uuid to use
For FYP, we want to pass the UUID as a param when searching for recommendations. The search comes before the recsys entry creation, so we need to generate the UUID first when searching, and then tell recsys to use that specific ID.
* Redux: fetch and store FYP
Note that the gid cannot be used as "hash" for the uri list -- it doesn't necessarily change when the list changes, so we can't use it to optimize redux. For now, just always update/render when re-fetched.
* UI for FYP
* Mark rendered FYPs
* Pass the FYP ID down the same way as Collection ID
Not ideal, but at least it's in the same pattern as existing code for now. The whole prop-drilling problem with the claim components will be fixed together later.
* Include 'gid' and 'uuid' in recommendation search
* Allow users to mark recommendations that they dislike
* Pass auth-token to all FYP requests + remove beacon use
beacons are unreliable and often blocked
* Only show FYP for members
* FYP readme page
* small fixes
* fyp
Co-authored-by: Thomas Zarebczan <thomas.zarebczan@gmail.com>
Ticket: 1079 Support geoblocking channels/videos
## Changes
- Replaced the .env version with iapi version.
- Includes 'videos' blocking and custom messages.
* Fix avatar occasionally stuck in spaceman
## Issue
Sometimes, we'll see a channel profile (e.g. in upper-right, in channel selector) stuck in the fallback Spaceman image.
This is due to OptimizedImage always starting with a blank src, and updated later when the mounted size has been determined. ChannelThumbnail, which uses OptimizedImage, captured the `onError` due to blank src.
## Fix
Don't mount the <img> until the optimum size has been determined.
* FileThumbnail: skip resolve if thumbnail url is specified
* UriIndicator: skip resolve if channel info is specified
* Notifications: disable batch resolve + use fetched data if available + fallback to resolve if n/a
The fallback is using the individual resolve when no direct data is provided and claim is undefined.
Commentron json params are usually underscored instead of camel-cased.
Double-checked commentron code:
```
// MentionedChannel channels mentioned in comment
type MentionedChannel struct {
ChannelName string `json:"channel_name"`
ChannelID string `json:"channel_id"`
}
```
The parameter should probably also be skipped instead of sending empty array, but leaving as-is for now since that is minor.
* Add ordering Icons
* Refactor doCollectionEdit
- It required claims as parameter, when only uris are used to populate the collection, so that was changed to pass down the uris instead.
- There were unused and mostly unnecessary functions inside, for example the parameter claimIds was never used so it would never enter the claimSearch function which again would be used to generate uris, so it's better to just use uris as parameter
* Add List Reordering changes
* Add toggle button for list editing
* Add toggle on content page collection sidebar
* Enable drag-n-drop to re-order list items
https://www.youtube.com/watch?v=aYZRRyukuIw
* Allow removing all unavailable claims from a List
* Fix <g> on icons
* Fix section buttons positioning
* Move preventDefault and stopPropagation to buttons div instead of each button, preventing clicking even if disabled opening the claim
* Change dragging cursor
* Fix sizing
* Fix dragging component
* Restrict dragging to vertical axis
* Ignore shuffle state for ordering
* Fix console errors
* Mobile fixes
* Fix sidebar spacing
* Fix grey on mobile after click
## Repro
1. Follow a channel.
2. When `preference_set` is sent, unfollow the channel.
3. A few seconds later, the final setting reflects (1) instead of (2).
The current sync loop involves doing a final `sync/get` at the end. While not necessary for the scenario above, the code flow covers various cases, so it's still needed for now.
## Approach
Implement an abort mechanism to the sync-loop.
When syncing from the `buildSharedStateMiddleware` loop, generate an ID for each sync session, and only store the latest one. Pass the ID to the completion-callback (and other places as needed), so we can check if our session is still the latest one before executing the callback.
The check for invalidation can also be placed in more places to cut off the sync process earlier, but it's only done for 2 critical places for now.
* Add ability to have claim searches auto-fetch up to 3 pages.
* make total_items and total_pages optional
* use auto pagination strategy when determining live claim
* Bump page size back to 50
* Upload: fix redux key clash
## Issue
`params` is the "final" value that will be passed to the SDK and `channel` is not a valid argument (it should be `channel_name`). Also, it seems like we only pass the channel ID now and skip the channel name entirely.
For the anonymous case, a clash will still happen when since the channel part is hardcoded to `anonymous`.
## Approach
Generate a guid in `params` and use that as the key to handle all the cases above. We couldn't use the `uploadUrl` because v1 doesn't have it.
The old formula is retained to allow users to retry or cancel their existing uploads one last time (otherwise it will persist forever). The next upload will be using the new key.
* Upload: add tab-locking
## Issue
- The previous code does detect uploads from multiple tabs, but it was done by handling the CONFLICT error message from the backend. At certain corner-cases, this does not work well. A better way is to not allow resumption while the same file is being uploading from another tab.
- When an upload from 1 tab finishes, the GUI on the other tab does not remove the completed item. User either have to refresh or click Cancel. Clicking Cancel results in the 404 backend error. This should be avoided.
## Approach
- Added tab synchronization and locking by passing the "locked" and "removed" information through `localStorage`.
## Other considered approaches
- Wallet sync -- but decided not to pollute the wallet.
- 3rd-party redux tab syncing -- but decided it's not worth adding another module for 1 usage.
* Upload: check if locked before confirming delete
## Reproduce
Have 2 tabs + paused upload
Open "cancel" dialog in one of the tabs.
Continue upload in other tab
Confirm cancellation in first tab
Upload disappears from both tabs, but based on network traffic the upload keeps happening.
(If upload finishes the claim seems to get created)
## Issue
If you make 2 claims from the same source file, the second upload thinks it's trying to resume from the first one. They should be unique uploads.
## Approach
Stash the upload url for comparison when looking up existing uploads to resume.
Stash that in `params` to minimize code changes. We'll just need to ensure it is cleared before we generate the SDK payload.
* Publish button: use spinner instead of "Publishing..."
Looks better, plus the preview could take a while sometimes.
* Refactor `doPublish`. No functional change
This is to allow `doPublish` to accept a custom payload as an input (for resuming uploads), instead of always resolving it from the redux data.
* Add doPublishResume
* Support resume-able upload via tus
## Issue
38 Handle resumable file upload
## Notes
Since we can't serialize a File object, we'll need to the user to re-select the file to resume.
* Exclude "modified date" for Firefox/Android
## Issue
It appears that the modification date of the Android file changes when selected, so that file was deemed "different" when trying to resume upload.
## Change
Exclude modification date for now. Let's assume a smart user.
* Move 'currentUploads' to 'publish' reducer
`publish` is currently rehydrated, so we can ride on that and don't need to store the `currentUploads` in `localStorage` for persistence. This would allow us to store Markdown Post data too, as `localStorage` has a 5MB limit per app.
We could have also made `webReducer` rehydrate, but in this repo, there is no need to split it to another reducer. It also makes more sense to be part of publish anyway (at least to me).
This change is mostly moving items between files, with the exception of
1. An additional REHYDRATE in the publish reducer to clean up the tusUploader.
2. Not clearing `currentUploads` in CLEAR_PUBLISH.
* Restore v1 code for livestream replay, etc.
v2 (tus) does not handle `remote_url`, so the app still needs v1 for that. Since we'll still have v1 code, use v1 for previews as well.
* Simplify dispatch map
Since none of dispatches are doing any custom transformation, just use a direct map. The number of arguments for the comment function are getting crazy.
* Block: pass comment ID for deletion when being blocked.
