CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
waitfornewblock waits until a new block is received, or the timeout expires, then
returns the current block height/hash.
waitforblock waits for a specific blockhash, or until the timeout expires, then
returns the current block height/hash. If the target blockhash is the current
tip, it will return immediately.
waitforblockheight waits until the tip has reached a certain height or higher,
then returns the current height and hash.
waitforblockheight is used to avoid polling in the rpc tests.
35fe039 Rename to PrecomputedTransactionData (Pieter Wuille)
ab48c5e Unit test for sighash caching (Nicolas DORIER)
d2c5d04 Precompute sighashes (Pieter Wuille)
fafe7b3 contrib: Make fix-copyright-headers.py more portable (MarcoFalke)
fa27c0a [doc] Fix typos in comments, doxygen: Fix comment syntax (MarcoFalke)
fabfd5d [qa] pull-tester: Don't mute zmq ImportError (MarcoFalke)
67a5502 init: Fix typo in help message for -whitelistforcerelay (Wladimir J. van der Laan)
We should learn about new peers via address messages.
An inbound peer connecting to us tells us nothing about
its ability to accept incoming connections from us, so
we shouldn't assume that we can connect to it based on
this.
The vast majority of nodes on the network do not accept
incoming connections, adding them will only slow down
the process of making a successful connection in the
future.
Nodes which have configured themselves to not announce would prefer we
not violate their privacy by announcing them in GETADDR responses.
Tests if addresses are online or offline by briefly connecting to them. These short lived connections are referred to as feeler connections. Feeler connections are designed to increase the number of fresh online addresses in tried by selecting and connecting to addresses in new. One feeler connection is attempted on average once every two minutes.
This change was suggested as Countermeasure 4 in
Eclipse Attacks on Bitcoin’s Peer-to-Peer Network, Ethan Heilman,
Alison Kendler, Aviv Zohar, Sharon Goldberg. ePrint Archive Report
2015/263. March 2015.
Commands can be executed with bracket syntax, example: `getwalletinfo()`.
Commands can be nested, example: `sendtoaddress(getnewaddress(), 10)`.
Simple queries are possible: `listunspent()[0][txid]`
Object values are accessed with a non-quoted string, example: [txid].
Fully backward compatible.
`generate 101` is identical to `generate(101)`
Result value queries indicated with `[]` require the new brackets syntax.
Comma as argument separator is now also possible: `sendtoaddress,<address>,<amount>`
Space as argument separator works also with the bracket syntax, example: `sendtoaddress(getnewaddress() 10)
No dept limitation, complex commands are possible:
`decoderawtransaction(getrawtransaction(getblock(getbestblockhash())[tx][0]))[vout][0][value]`
Remove the unused variable "blockTmp" in CMerkleTx::SetMerkleBranch. It
was previously used to read the block from disk if not provided as
argument, but is no longer needed.
The `pickDataDirectory()` function was calling `exit(0)` to quit
the application when the user closes the dialog without choosing
a data directory.
This is a bad idea because a background thread is created (to
check free space on the drive of the currently selected datadir).
The thread is not stopped and unwound properly, resulting in a potential
race condition somewhere deep in Qt.
So replace the `exit()` by a boolean return value, and let the
stack unwind normally.
7a49cac Merge #410: Add string.h include to ecmult_impl
0bbd5d4 Add string.h include to ecmult_impl
c5b32e1 Merge #405: Make secp256k1_fe_sqrt constant time
926836a Make secp256k1_fe_sqrt constant time
e2a8e92 Merge #404: Replace 3M + 4S doubling formula with 2M + 5S one
8ec49d8 Add note about 2M + 5S doubling formula
5a91bd7 Merge #400: A couple minor cleanups
ac01378 build: add -DSECP256K1_BUILD to benchmark_internal build flags
a6c6f99 Remove a bunch of unused stdlib #includes
65285a6 Merge #403: configure: add flag to disable OpenSSL tests
a9b2a5d configure: add flag to disable OpenSSL tests
b340123 Merge #402: Add support for testing quadratic residues
e6e9805 Add function for testing quadratic residue field/group elements.
efd953a Add Jacobi symbol test via GMP
fa36a0d Merge #401: ecmult_const: unify endomorphism and non-endomorphism skew cases
c6191fd ecmult_const: unify endomorphism and non-endomorphism skew cases
0b3e618 Merge #378: .gitignore build-aux cleanup
6042217 Merge #384: JNI: align shared files copyright/comments to bitcoinj's
24ad20f Merge #399: build: verify that the native compiler works for static precomp
b3be852 Merge #398: Test whether ECDH and Schnorr are enabled for JNI
aa0b1fd build: verify that the native compiler works for static precomp
eee808d Test whether ECDH and Schnorr are enabled for JNI
7b0fb18 Merge #366: ARM assembly implementation of field_10x26 inner (rebase of #173)
001f176 ARM assembly implementation of field_10x26 inner
0172be9 Merge #397: Small fixes for sha256
3f8b78e Fix undefs in hash_impl.h
2ab4695 Fix state size in sha256 struct
6875b01 Merge #386: Add some missing `VERIFY_CHECK(ctx != NULL)`
2c52b5d Merge #389: Cast pointers through uintptr_t under JNI
43097a4 Merge #390: Update bitcoin-core GitHub links
31c9c12 Merge #391: JNI: Only call ecdsa_verify if its inputs parsed correctly
1cb2302 Merge #392: Add testcase which hits additional branch in secp256k1_scalar_sqr
d2ee340 Merge #388: bench_ecdh: fix call to secp256k1_context_create
093a497 Add testcase which hits additional branch in secp256k1_scalar_sqr
a40c701 JNI: Only call ecdsa_verify if its inputs parsed correctly
faa2a11 Update bitcoin-core GitHub links
47b9e78 Cast pointers through uintptr_t under JNI
f36f9c6 bench_ecdh: fix call to secp256k1_context_create
bcc4881 Add some missing `VERIFY_CHECK(ctx != NULL)` for functions that use `ARG_CHECK`
6ceea2c align shared files copyright/comments to bitcoinj's
70141a8 Update .gitignore
7b549b1 Merge #373: build: fix x86_64 asm detection for some compilers
bc7c93c Merge #374: Add note about y=0 being possible on one of the sextic twists
e457018 Merge #364: JNI rebased
86e2d07 JNI library: cleanup, removed unimplemented code
3093576a JNI library
bd2895f Merge pull request #371
e72e93a Add note about y=0 being possible on one of the sextic twists
3f8fdfb build: fix x86_64 asm detection for some compilers
e5a9047 [Trivial] Remove double semicolons
c18b869 Merge pull request #360
3026daa Merge pull request #302
03d4611 Add sage verification script for the group laws
a965937 Merge pull request #361
83221ec Add experimental features to configure
5d4c5a3 Prevent damage_array in the signature test from going out of bounds.
419bf7f Merge pull request #356
03d84a4 Benchmark against OpenSSL verification
git-subtree-dir: src/secp256k1
git-subtree-split: 7a49cacd3937311fcb1cb36b6ba3336fca811991
9e9d644 net: fixup nits (Cory Fields)
8945384 net: Have LookupNumeric return a CService directly (Cory Fields)
21ba407 net: narrow include scope after moving to netaddress (Cory Fields)
21e5b96 net: move CNetAddr/CService/CSubNet out of netbase (Cory Fields)
1017b8a net: Add direct tests for new CSubNet constructors (Cory Fields)
b6c3ff3 net: Split resolving out of CSubNet (Cory Fields)
f96c7c4 net: Split resolving out of CService (Cory Fields)
31d6b1d net: Split resolving out of CNetAddr (Cory Fields)
c784086 use std::map::emplace() instead of std::map::insert() (whythat)
5e187e7 use c++11 std::unique_ptr instead of boost::shared_ptr (whythat)
947913f use std::map::erase(const_iterator, const_iterator) to get non-constant iterator (whythat)
239cbd2 qa/rpc-tests/segwit: Test GBT sigops before and after activation (Luke Dashjr)
160f895 Bugfix: Use pre-BIP141 sigops until segwit activates (Luke Dashjr)
refs #8225
To ensure the GUI closes when the "Minimize on close" window option is disabled, and the "Minimize to the tray instead of the taskbar" window option is enbaled, remove a check made against the "Minimize to the tray instead of the taskbar" value, made during GUI closure.
To ensure the GUI minimizes to the taskbar when the "Minimize on close" window option is enabled, and the "Minimize to the tray instead of the taskbar" window option is disabled, minimize the GUI and ignore the closure event.
9d4eb9a Do diskspace check before import thread is started (Pieter Wuille)
aa59f2e Add extra message to avoid a long 'Loading banlist' (Pieter Wuille)
0fd2a33 Use a signal to continue init after genesis activation (Pieter Wuille)
Updating documentation for adding new unit test files
Removing unneeded sentence from README
Removing uint160_tests.cpp as it DNE
Formatting command line instructions to use ``
fixing 80 char formatting issue in README
fixing more nits
a5072a7 util: Remove zero-argument versions of LogPrint and error (Wladimir J. van der Laan)
695041e util: Update tinyformat (Wladimir J. van der Laan)
7e87033 httpserver: replace boost threads with std (Cory Fields)
d3773ca httpserver: explicitly detach worker threads (Cory Fields)
755aa05 httpserver: use a future rather than relying on boost's try_join_for (Cory Fields)
along with mutex/condvar/bind/etc.
httpserver handles its own interruption, so there's no reason not to use std
threading.
While we're at it, may as well kill the BOOST_FOREACH's as well.
Forward-ports two commits from 0.13:
- [0.13] Create a new HD seed after encrypting the wallet
- [Wallet] Add CKeyMetadata record for HDMasterKey(s), factor out HD key generation
Github-Pull: #8389
Rebased-From: f142c11ac634df487cc4bc65a5f1c9a3e3563dd9 de45c065f0648c4c41b57cb492420ceeed29dd11
c59c434 qa: Add test for standardness of segwit v0 outputs (Suhas Daftuar)
1ffaff2 Make witness v0 outputs non-standard before segwit activation (Johnson Lau)
7945088 [Wallet] comsetic non-code changes for the HD feature (Jonas Schnelli)
68d7682 [Wallet] ensure CKeyMetadata.hdMasterKeyID will be cleared during SetNull() (Jonas Schnelli)
f708085 [QA] extend wallet-hd test to cover HD metadata (Jonas Schnelli)
986c223 [Wallet] print hd masterkeyid in getwalletinfo (Jonas Schnelli)
b1c7b24 [Wallet] report optional HDKeypath/HDMasterKeyId in validateaddress (Jonas Schnelli)
5b95dd2 [Wallet] extend CKeyMetadata with HD keypath (Jonas Schnelli)
46c9620 Test that unnecessary witnesses can't be used for mempool DoS (Suhas Daftuar)
bb66a11 Fix DoS vulnerability in mempool acceptance (Suhas Daftuar)
When processing a headers message that looks like a block announcement,
send peer a getheaders if the headers message won't connect.
Apply DoS points after too many consecutive unconnecting headers messages.
Moves the IsStandard check to happen after the premature-witness check,
so that adding a witness to a transaction can't prevent mempool acceptance.
Note that this doesn't address the broader category of potential mempool DoS
issues that affect transactions after segwit activation.
Also cap the allocation for the leveldb-specific cache for the UTXO set
to 8MiB.
This avoids that the extra cache memory goes to the much less effective
leveldb cache instead of our application-level cache.
This reverts PR #4906, "Coinselection prunes extraneous inputs from
ApproximateBestSubset".
Apparently the previous behavior of slightly over-estimating the set of
inputs was useful in cleaning up UTXOs.
See also #7664, #7657, as well as 2016-07-01 discussion on #bitcoin-core-dev IRC.
Generate an (invalid) example address for in the bitcoin address
widgets, based on the network prefix, instead of hardcoding a mainnet
address.
- `1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L` for mainnet (same as now)
- `n2wxQmfexkjwEPgdD6iJA7T7RtzkmHxhFc` for testnet
Changes in tinyformat, recently imported from upstream have made the
zero-argument versions of formatting functions unnecessary. Remove them.
This is a slight semantic change: `%` characters in the zero-argument
call are now regarded and need to be escaped. As for as I know, the only
use of this is in `main.cpp`.
Updates `tinyformat.h` to commit
3a33bbf654 upstream.
Makes sure that our local changes are kept:
- #37671b8fd35aad Make tinyformat errors raise an exception instead of assert()ing
- #47359b6d4c5cdc Move strprintf define to tinyformat.h
- #47486e5fd003e0 include stdexcept (for std::exception)
- #80009eaa0afa6e force USE_VARIADIC_TEMPLATES
- Add `std::string format(const std::string &fmt...` added this
at the time, as we want to be able to do `strprintf(_(...), ...)`
Inspired by #8264.
mininode now supports witness transactions/blocks, blocktools
has a helper for adding witness commitments to blocks, and script
has a function to calculate hashes for signature under sigversion
1, used by segwit.
Py3 conversion by Marco Falke
Test to make sure upgraded nodes don't ask for non-wit blocks by
Gregory Sanders.
script_tests: always test bitcoinconsensus_verify_script_with_amount if VERIFY_WITNESS isn't set
Rename internal method + make it static
trim bitcoinconsensus_ prefix
Add SERIALIZE_TRANSACTION_WITNESS flag
48efec8 Fix some minor compact block issues that came up in review (Matt Corallo)
ccd06b9 Elaborate bucket size math (Pieter Wuille)
0d4cb48 Use vTxHashes to optimize InitData significantly (Matt Corallo)
8119026 Provide a flat list of txid/terators to txn in CTxMemPool (Matt Corallo)
678ee97 Add BIP 152 to implemented BIPs list (Matt Corallo)
56ba516 Add reconstruction debug logging (Matt Corallo)
2f34a2e Get our "best three" peers to announce blocks using cmpctblocks (Matt Corallo)
927f8ee Add ability to fetch CNode by NodeId (Matt Corallo)
d25cd3e Add receiver-side protocol implementation for CMPCTBLOCK stuff (Matt Corallo)
9c837d5 Add sender-side protocol implementation for CMPCTBLOCK stuff (Matt Corallo)
00c4078 Add protocol messages for short-ids blocks (Matt Corallo)
e3b2222 Add some blockencodings tests (Matt Corallo)
f4f8f14 Add TestMemPoolEntryHelper::FromTx version for CTransaction (Matt Corallo)
85ad31e Add partial-block block encodings API (Matt Corallo)
5249dac Add COMPACTSIZE wrapper similar to VARINT for serialization (Matt Corallo)
cbda71c Move context-required checks from CheckBlockHeader to Contextual... (Matt Corallo)
7c29ec9 If AcceptBlockHeader returns true, pindex will be set. (Matt Corallo)
96806c3 Stop trimming when mapTx is empty (Pieter Wuille)
Pulls in the following new languages:
- `af` Afrikaans
- `es_419` Spanish (Latin America)
- `es_AR` Spanish (Argentina)
- `es_CO` Spanish (Colombia)
- `fil` Filipino
- `it_IT` Italian (Italy)
- `ro` Romanian
- `sr@latin` Serbian (Latin)
- `ta` Tamil
- `uz@Latn` Uzbek (Latin)
- `zh_HK` Chinese (Hong Kong)
54326a6 Increase maximum orphan size to 100,000 bytes. (Gregory Maxwell)
8c99d1b Treat orphans as implicit inv for parents, discard when parents rejected. (Gregory Maxwell)
11cc143 Adds an expiration time for orphan tx. (Gregory Maxwell)
db0ffe8 This eliminates the primary leak that causes the orphan map to always grow to its maximum size. (Gregory Maxwell)
1b0bcc5 Track orphan by prev COutPoint rather than prev hash (Pieter Wuille)
CreateNewBlock returns a pointer for which the caller takes ownership.
Use std::unique_ptr to make this explicit and simplify handling of these
objects in getblocktemplate.
7982fce doc: Mention full UTF-8 support in release notes (Wladimir J. van der Laan)
6bbb4ef test: test utf-8 for labels in wallet (Wladimir J. van der Laan)
a406fcb test: add ensure_ascii setting to AuthServiceProxy (Wladimir J. van der Laan)
60ab9b2 Squashed 'src/univalue/' changes from 2740c4f..f32df99 (Wladimir J. van der Laan)
1a5a4e6 Randomize name lookup result in ConnectSocketByName (Pieter Wuille)
f9f5cfc Prevent duplicate connections where one is by name and another by ip (Pieter Wuille)
1111b80 Rework addnode behaviour (Pieter Wuille)
6ee7f05 Allow disconnecting a netgroup with only one member in eviction. (Gregory Maxwell)
5d0ca81 Add recently accepted blocks and txn to AttemptToEvictConnection. (Gregory Maxwell)
An orphan whos parents were rejected is never going to connect, so there
is little utility in keeping it.
Orphans also helpfully tell us what we're missing, so go ahead and treat
it as INVed.
This prevents higher order orphans and other junk from
holding positions in the orphan map. Parents delayed
twenty minutes are more are unlikely to ever arrive.
The freed space will improve the orphan matching success rate for
other transactions.
As per meeting 2016-03-31
https://bitcoincore.org/en/meetings/2016/03/31/#bad-chain-alerts
The partition checker was producing huge number of false-positives
and was disabled in 0.12.1 on the understanding it would either be
fixed in 0.13 or removed entirely from master if not.
* Use CNode::addeName to track whether a connection to a name is already open
* A new connection to a previously-connected by-name addednode is only opened when
the previous one closes (even if the name starts resolving to something else)
* At most one connection is opened per addednode (even if the name resolves to multiple)
* Unify the code between ThreadOpenAddedNodeConnections and getaddednodeinfo
* Information about open connections is always returned, and the dns argument becomes a dummy
* An IP address and inbound/outbound is only reported for the (at most 1) open connection
In the Receive 'Tab' of the QT wallet, when 'Show'ing a previously requested payment, add a label underneath the QR Code showing the bitcoin address where the funds will go to.
This way the user can be sure that the QR code scanner app the user using is reading the correct bitcoin address, preventing funds to be stolen.
Includes fix for HiDPI screens by @jonasschnelli.
ff2dcf2 Tests: Edit bloated varint test and add option for 'barely expensive' tests (mrbandrews)
12c5a16 Catch exceptions from non-canonical encoding and print only to log (mrbandrews)
291f8aa Continuing port of java comptool (mrbandrews)
8c9e681 Tests: Rework blockstore to avoid re-serialization. (mrbandrews)
c2dd5a3 FIX: correctly measure size of priority block (Alex Morcos)
a278764 FIX: Account for txs already added to block in addPriorityTxs (Alex Morcos)
4dc94d1 Refactor CreateNewBlock to be a method of the BlockAssembler class (Alex Morcos)
always grow to its maximum size.
This does not go so far as to attempt to connect orphans made
connectable by a new block.
Keeping the orphan map less full helps improve the reliability
of relaying chains of transactions.
Putting the build date in the executable is a practice that has no place
in these days, now that deterministic building is increasingly common.
Continues #7732 which did this for the GUI.
eebc232 test: Add more test vectors for siphash (Wladimir J. van der Laan)
8884830 Use C++11 thread-safe static initializers (Pieter Wuille)
c31b24f Use 64-bit SipHash of netgroups in eviction (Pieter Wuille)
9bf156b Support SipHash with arbitrary byte writes (Pieter Wuille)
053930f Avoid recalculating vchKeyedNetGroup in eviction logic. (Patrick Strateman)
288d85d Get rid of CTxMempool::lookup() entirely (Pieter Wuille)
c2a4724 Optimization: use usec in expiration and reuse nNow (Pieter Wuille)
e9b4780 Optimization: don't check the mempool at all if no mempool req ever (Pieter Wuille)
dbfb426 Optimize the relay map to use shared_ptr's (Pieter Wuille)
8d39d7a Switch CTransaction storage in mempool to std::shared_ptr (Pieter Wuille)
1b9e6d3 Add support for unique_ptr and shared_ptr to memusage (Pieter Wuille)
6182d10 Do not increment nAttempts by more than one for every Good connection. (Gregory Maxwell)
c769c4a Avoid counting failed connect attempts when probably offline. (Gregory Maxwell)
3d3602f Add RPC test for the p2p mempool command in conjunction with disabled bloomfilters (Jonas Schnelli)
beceac9 Disable the mempool P2P command when bloom filters disabled (Peter Todd)
Add error and range-checking parsers for unsigned 32 and 64 bit numbers.
The 32-bit variant is required for parsing sequence numbers from the
command line in `bitcoin-tx` (see #8164 for discussion). I've thrown in
the 64-bit variant as a bonus, as I'm sure it will be needed at some
point.
Also adds tests, and updates `developer-notes.md`.
ae357d5 [Bitcoin-Tx] Add tests for sequence number support (Jonas Schnelli)
e59336f [bitcoin-tx] allow to set nSequence number over the in= command (Jonas Schnelli)
a946bb6 [RPC] createrawtransaction: add option to set the sequence number per input (Jonas Schnelli)
Also introduce UniValueType
UniValueType is a wrapper for UniValue::VType which allows setting
a typeAny flag. This flag indicates the type does not matter.
(Used by RPCTypeCheckObj)
We send a newly-accepted peer a 1000-entry addr message, and then only use
vAddrToSend for small messages. Deallocate vAddrToSend after it's been used for
the big message to save about 40 kB per connected inbound peer.
- BIP9DeploymentInfo struct for static deployment info
- VersionBitsDeploymentInfo: Avoid C++11ism by commenting parameter names
- getblocktemplate: Make sure to set deployments in the version if it is LOCKED_IN
- In this commit, all rules are considered required for clients to support
Change authentication order to make it more clear (see #7700).
- If the `-torpassword` option is provided, force use of
`HASHEDPASSWORD` auth.
- Give error message if `-torpassword` provided, but
`HASHEDPASSWORD` auth is not available.
- Give error message if only `HASHEDPASSWORD` available, but
`-torpassword` not given.
* Switch mapRelay to use shared_ptr<CTransaction>
* Switch the relay code to copy mempool shared_ptr's, rather than copying
the transaction itself.
* Change vRelayExpiration to store mapRelay iterators rather than hashes
(smaller and faster).
Optimistically test the latch bool before taking the lock.
For all IsInitialBlockDownload calls after the first to return false,
this avoids the need to lock cs_main.
This was caused by an pyc files hanging around from previous
python2 invocations, when the matching .py missing from that path.
This should not be a problem with python3's tagged caches.
Saves about 10% of application memory usage once the mempool warms up. Since the
mempool is DynamicUsage-regulated, this will translate to a larger mempool in
the same amount of space.
Map value type: eliminate the vin index; no users of the map need to know which
input of the transaction is spending the prevout.
Map key type: replace the COutPoint with a pointer to a COutPoint. A COutPoint
is 36 bytes, but each COutPoint is accessible from the same map entry's value.
A trivial DereferencingComparator functor allows indirect map keys, but the
resulting syntax is misleading: `map.find(&outpoint)`. Implement an indirectmap
that acts as a wrapper to a map that uses a DereferencingComparator, supporting
a syntax that accurately reflect the container's semantics: inserts and
iterators use pointers since they store pointers and need them to remain
constant and dereferenceable, but lookup functions take const references.
269a440 Add test for dbwrapper iterators with same-prefix keys. (Matt Corallo)
6030625 test: Add more thorough test for dbwrapper iterators (Wladimir J. van der Laan)
84c13e7 chain: Add assertion in case of missing records in index db (Wladimir J. van der Laan)
Before this, if someone imported a scriptPubKey directly (in hex form) using
importaddress, outputs sending to it would be treated as change, as the
corresponding CTxDestination was not added to the address book.
Fix this by trying to detect scriptPubKeys that are in fact convertible to a
CTxDestination and add them anyway. Add a warning to the RPC help to warn
against importing raw non-standard scripts.
- clear the __pycache__ during 'make clean'
- Copy the qrc locale file to a temp location and remove it when finished
(rcc expects everything to be in the same path)
This reduces the rate of not founds by better matching the far
end expectations, it also improves privacy by removing the
ability to use getdata to probe for a node having a txn before
it has been relayed.
Previously the benchmark code used an integer division (%) with
a non-constant in the inner-loop. This is quite slow on many
processors, especially ones like ARM that lack a hardware divide.
Even on fairly recent x86_64 like haswell an integer division can
take something like 100 cycles-- making it comparable to the
runtime of siphash.
This change avoids the division by using bitmasking instead. This
was especially easy since the count was only increased by doubling.
This change also restarts the timing when the execution time was
very low this avoids mintimes of zero in cases where one execution
ends up below the timer resolution. It also reduces the impact of
the overhead on the final result.
The formatting of the prints is changed to not use scientific
notation make it more machine readable (in particular, gnuplot
croaks on the non-fixedpoint, and it doesn't sort correctly).
This also hoists out all the floating point divisions out of the
semi-hot path because it was easy to do so.
It might be prudent to break out the critical test into a macro
just to guarantee that it gets inlined. It might also make sense
to just save out the intermediate counts and times and get the
floating point completely out of the timing loop (because e.g.
on hardware without a fast hardware FPU like some ARM it will
still be slow enough to distort the results). I haven't done
either of these in this commit.
Fixing formatting
Adding test case into automatically generated test case set
Clean up commits
removing extra whitespace from eol
Removing extra whitespace on macro line
If a node is offline failed outbound connection attempts will crank up
the addrman counter and effectively blow away our state.
This change reduces the problem by only counting attempts made while
the node believes it has outbound connections to at least two
netgroups.
Connect and addnode connections are also not counted, as there is no
reason to unequally penalize them for their more frequent
connections -- though there should be no real effect from this
unless their addnode configureation is later removed.
Wasteful repeated connection attempts while only a few connections are
up are avoided via nLastTry.
This is still somewhat incomplete protection because our outbound
peers could be down but not timed out or might all be on 'local'
networks (although the requirement for multiple netgroups helps).
The ability to GETDATA a transaction which has not (yet) been relayed
is a privacy loss vector.
The use of the mempool for this was added as part of the mempool p2p
message and is only needed to fetch transactions returned by it.
2a8b358 Fix typo adddrman to addrman as requested in #8070 (Ethan Heilman)
f4119c6 Remove non-determinism which is breaking net_tests #8069 (EthanHeilman)
bf9266e Use Socks5ErrorString() to decode error responses from socks proxy. (Warren Togami)
94fd1d8 Make Socks5() InterruptibleRecv() timeout/failures informative. (Warren Togami)
0d9af79 SOCKS5 connecting and connected messages with -debug=net. (Warren Togami)
00678bd Make failures to connect via Socks5() more informative and less unnecessarily scary. (Warren Togami)
b4d24e1 Report reindexing progress in GUI (Pieter Wuille)
d3d7547 Add -reindex-chainstate that does not rebuild block index (Pieter Wuille)
fb8fad1 Optimize ActivateBestChain for long chains (Pieter Wuille)
316623f Switch reindexing to AcceptBlock in-loop and ActivateBestChain afterwards (Pieter Wuille)
d253ec4 Make ProcessNewBlock dbp const and update comment (Pieter Wuille)
5d5e7a0 net: No need to export ConnectNode (Cory Fields)
e9ed620 net: No need to export DumpBanlist (Cory Fields)
8b8f877 net: make Ban/Unban/ClearBan functionality consistent (Cory Fields)
cca221f net: Drop CNodeRef for AttemptToEvictConnection (Cory Fields)
563f375 net: use the exposed GetNodeSignals() rather than g_signals directly (Cory Fields)
9faa490 net: remove unused set (Cory Fields)
52cbce2 net: don't import std namespace (Cory Fields)
a68ec21 Use SipHash-2-4 for address relay selection (Pieter Wuille)
8cc9cfe Switch CTxMempool::mapTx to use a hash index for txids (Pieter Wuille)
382c871 Use SipHash-2-4 for CCoinsCache index (Pieter Wuille)
0b1295b Add SipHash-2-4 primitives to hash (Pieter Wuille)
1475ecf Fix de-serialization bug where AddrMan is corrupted after exception * CAddrDB modified so that when de-serialization code throws an exception Addrman is reset to a clean state * CAddrDB modified to make unit tests possible * Regression test created to ensure bug is fixed * StartNode modifed to clear adrman if CAddrDB::Read returns an error code. (EthanHeilman)
fa83a5d [qa] wallet: Temporarily disable salvagewallet test (MarcoFalke)
fadd048 [doc] Link to clang-format in the developer notes (MarcoFalke)
fa72f7d [doc] Remove outdated line from listunspent RPC help, fix typo (MarcoFalke)
ac40ed7 Increase timeout waiting for pruned blk00000.dat (error10)
The current logic for syncing headers may lead to lots of duplicate
getheaders requests being sent: If a new block arrives while the node
is in headers sync, it will send getheaders in response to the block
announcement. When the headers arrive, the message will be of maximum
size and so a follow-up request will be sent---all of that in addition
to the existing headers syncing. This will create a second "chain" of
getheaders requests. If more blocks arrive, this may even lead to
arbitrarily many parallel chains of redundant requests.
This patch changes the behaviour to only request more headers after a
maximum-sized message when it contained at least one unknown header.
This avoids sustaining parallel chains of redundant requests.
Note that this patch avoids the issues raised in the discussion of
https://github.com/bitcoin/bitcoin/pull/6821: There is no risk of the
node being permanently blocked. At the latest when a new block arrives
this will trigger a new getheaders request and restart syncing.
Verify that results correct (match known values), consistent (encrypt->decrypt
matches the original), and compatible with the previous openssl implementation.
Also check that failed encrypts/decrypts fail the exact same way as openssl.
Wallet must come before crypto, otherwise linking fails on some platforms.
Includes a tangentially-related general cleanup rather than making the Makefile
sloppier.
The output should always match openssl's, even for failed operations. Even for
a decrypt with broken padding, the output is always deterministic (and attemtps
to be constant-time).
My changes leave all tray icon and menu creation/initialization logic
untouched. It only shows or hides the icon according to the setting.
A new checkbox was added to the OptionsDialog under the Window tab. A
bool option named "hideTrayIcon" was added to OptionsModel. This
checkbox was mapped like other all options to the OptionsModel.
A signal was added to the OptionsModel for broadcasting changes the the
hideTrayIcon option. This signal was connected to a new slot added to
BitcoinGUI named setTrayIconVisible(bool). The slot simply hides or
shows the trayIcon in BitcoinGUI according to the parameter recieved.
Changing NOP3 op name to OP_CHECKSEQUENCEVERIFY, renaming instances of OP_NOP3 in script_tests.json to CHECKSEQUENCEVERIFY
Cleaning up NOP3 comment
Re-adding test cases that were accidentally deleted, removing dupicated test case, fixing formatting
Removing re-labeling of OP_NOP3 to OP_CSV
Fixing whitespace issues
- Ban/Unban/ClearBan call uiInterface.BannedListChanged() as necessary
- Ban/Unban/ClearBan sync to disk if the operation is user-invoked
- Mark node for disconnection automatically when banning
- Lock cs_vNodes while setting disconnected
- Don't spin in a tight loop while setting disconnected
Move the version reporting to Wallet::Verify, before starting
verification of the wallet.
This removes the dependency of init on a specific wallet database
library.
A further, trivial step towards resolving #7965.
166e4b0 Notify other serviceQueue thread we are finished to prevent deadlocks. (Pavel Janík)
db18ab2 Reenable multithread scheduler test. (Pavel Janík)
I made a subclass of QMessageBox that disables the send button in
exec() and starts a timer that calls a slot to re-enable it after a
configurable delay.
It also has a countdown in the send/yes button while it is disabled
to hint to the user why the send button is disabled (and that it is
actually supposed to be disabled).
* The "ERROR" was printed far too often during normal operation for what was not an error.
* Makes the Socks5() connect failure similar to the IP connect failure in debug.log.
Before:
`2016-05-09 00:15:00 ERROR: Proxy error: host unreachable`
After:
`2016-05-09 00:15:00 Socks5() connect to t6xj6wilh4ytvcs7.onion:18333 failed: host unreachable"`
Locking for each operation here is unnecessary, and solves the wrong problem.
Additionally, it introduces a problem when cs_vNodes is held in an owning
class, to which invididual CNodeRefs won't have access.
These should be weak pointers anyway, once vNodes contain shared pointers.
Rather than using a refcounting class, use a 3-step process instead.
1. Lock vNodes long enough to snapshot the fields necessary for comparing
2. Unlock and do the comparison
3. Re-lock and mark the resulting node for disconnection if it still exists
d1d7775 Improve worst-case behavior of CScript::FindAndDelete (Patrick Strateman)
e2a30bc Unit test for CScript::FindAndDelete (Gavin Andresen)
c0f660c Replace c-style cast with c++ style static_cast. (Patrick Strateman)
ec9ad5f Replace memcmp with std::equal in CScript::FindAndDelete (Patrick Strateman)
b559914 Move bloom and feerate filtering to just prior to tx sending. (Gregory Maxwell)
4578215 Return mempool queries in dependency order (Pieter Wuille)
ed70683 Handle mempool requests in send loop, subject to trickle (Pieter Wuille)
dc13dcd Split up and optimize transaction and block inv queues (Pieter Wuille)
f2d3ba7 Eliminate TX trickle bypass, sort TX invs for privacy and priority. (Gregory Maxwell)
f0188f9 http: use std::move to move HTTPRequest into HTTPWorkItem (Wladimir J. van der Laan)
37b2137 http: Change boost::scoped_ptr to std::unique_ptr in HTTPRequest (Wladimir J. van der Laan)
f97b410 http: Add log message when work queue is full (Wladimir J. van der Laan)
091d6e0 http: Do a pending c++11 simplification (Wladimir J. van der Laan)
Use std::unique_ptr for handling work items.
This makes the code more RAII and, as mentioned in the comment, is what
I planned when I wrote the code in the first place.
08d7b56 util: switch LogPrint and error to variadic templates (Wladimir J. van der Laan)
9eaa0af tinyformat: force USE_VARIADIC_TEMPLATES (Wladimir J. van der Laan)
* CAddrDB modified so that when de-serialization code throws an exception Addrman is reset to a clean state
* CAddrDB modified to make unit tests possible
* Regression test created to ensure bug is fixed
* StartNode modifed to clear adrman if CAddrDB::Read returns an error code.
Some developers clearly don't get this and have been posting
"improvements" that create clear vulnerabilities. It should
have been better explained in the code, since the design
is somewhat subtle and getting it right is important.
This patch changes the implementation from one that stores 16 2-bit integers
in one uint32_t's, to one that stores the first bit of 64 2-bit integers in
one uint64_t and the second bit in another. This allows for 450x faster
refreshing and 2.2x faster average speed.
Change the few occurrences of the deprecated `auto_ptr` to c++11 `unique_ptr`.
Silences the deprecation warnings.
Also add a missing `std::` for consistency.
Bitwise logic combined with `<` with undefined signedness will
potentially results in undefined behavior. Fix this by defining the type
as a c++11 typed enum.
Fixes#6017.
f135e3c qt: Add transaction hash to details window title (Wladimir J. van der Laan)
17a6a21 qt: Make it possible to show details for multiple transactions (Wladimir J. van der Laan)
DumpBanList currently does this:
- with lock: take a copy of the banmap
- perform I/O (write out the banmap)
- with lock: mark the banmap non-dirty
If a new ban is added during the I/O operation, it may never be persisted to
disk.
Reorder operations so that the data to be persisted cannot be older than the
time at which the banmap was marked non-dirty.
I made a silly mistake in a database wrapper where keys
were sorted by char instead of uint8_t. As x86 char is signed
the sorting for the block index database was messed up, resulting
in a segfault due to missing records.
Add a test to catch:
- Wrong sorting
- Seeking errors
- Iteration result not complete
ActivateBestChain uses chainActive after releasing the lock; reorder operations
to move all access to synchronized object into existing LOCK(cs_main) block.
A small GUI annoyance for me has always been that it's impossible to
have multiple transaction detail windows open, for example to compare
transactions.
This patch makes the window non-modal so that it is possible to open
transaction details at will.
869cf12 dbwrapper: Move `HandleError` to `dbwrapper_private` (Wladimir J. van der Laan)
b69836d dbwrapper: Pass parent CDBWrapper into CDBBatch and CDBIterator (Wladimir J. van der Laan)
878bf48 dbwrapper: Remove CDBWrapper::GetObfuscateKeyHex (Wladimir J. van der Laan)
74f7b12 dbwrapper: Remove throw keywords in function signatures (Wladimir J. van der Laan)
Pass parent wrapper directly instead of obfuscation key. This
makes it possible for other databases which re-use this code
to use other properties from the database.
Add a namespace dbwrapper_private for private functions to be used
only in dbwrapper.h/cpp and dbwrapper_tests.
Using throw() specifications in function signatures is not only
not required in C++, it is considered deprecated for
[various reasons](https://stackoverflow.com/questions/1055387/throw-keyword-in-functions-signature).
It is not implemented by any of the common C++ compilers. The usage is
also inconsistent with the rest of the source code.
Without this patch:
- When I compile the GUI from the bitcoin directory itself, it works as
expected.
- When I build the GUI in an out-of-tree build, I cannot get it to
select tabs. When I click, say the "Receive" tab nothing happens,
the button selects but it doesn't switch the page. The rest - even
the debug window - seems to work.
See full discussion here:
https://github.com/bitcoin/bitcoin/pull/7911#issuecomment-212413442
This turned out to be caused by a mismatch in the arguments to moc,
preventing it from finding `bitcoin-config.h`. Fix this by passing
`$(DEFAULT_INCLUDES)` to it, which gets set to the appropriate
path by autoconf itself.
SetString seems to be passing the length of the wrong variable to
memory_cleanse, resulting in the last byte of the temporary buffer not being
securely erased.
This will avoid sending more pointless INVs around updates, and
prevents using filter updates to timetag transactions.
Also adds locking for fRelayTxes.
By eliminating queued entries from the mempool response and responding only at
trickle time, this makes the mempool no longer leak transaction arrival order
information (as the mempool itself is also sorted)-- at least no more than
relay itself leaks it.
Previously we would assert that if every block in vBlockHashesToAnnounce is in
chainActive, then the blocks to be announced must connect. However, there are
edge cases where this assumption could be violated (eg using invalidateblock /
reconsiderblock), so just check for this case and revert to inv-announcement
instead.
Rather than allowing CNetAddr/CService/CSubNet to launch DNS queries, require
that addresses are already resolved.
This greatly simplifies async resolve logic, and makes it harder to
accidentally leak DNS queries.
Note: Some seeds aren't actually returning an IP for their name entries, so
they're being added to addrman with a source of [::].
This commit shouldn't change that behavior, for better or worse.
Previously Bitcoin would send 1/4 of transactions out to all peers
instantly. This causes high overhead because it makes >80% of
INVs size 1. Doing so harms privacy, because it limits the
amount of source obscurity a transaction can receive.
These randomized broadcasts also disobeyed transaction dependencies
and required use of the orphan pool. Because the orphan pool is
so small this leads to poor propagation for dependent transactions.
When the bypass wasn't in effect, transactions were sent in the
order they were received. This avoided creating orphans but
undermines privacy fairly significantly.
This commit:
Eliminates the bypass. The bypass is replaced by halving the
average delay for outbound peers.
Sorts candidate transactions for INV by their topological
depth then by their feerate (then hash); removing the
information leakage and providing priority service to
higher fee transactions.
Limits the amount of transactions sent in a single INV to
7tx/sec (and twice that for outbound); this limits the
harm of low fee transaction floods, gives faster relay
service to higher fee transactions. The 7 sounds lower
than it really is because received advertisements need
not be sent, and because the aggregate rate is multipled
by the number of peers.
leveldb's buildsystem causes us a few problems:
- breaks out-of-tree builds
- forces flags used for some tools
- limits cross builds
Rather than continuing to add wrappers around it, simply integrate it into our
build.
b30fb42 test: Rename wallet.dat to wallet_test.dat (Wladimir J. van der Laan)
a25a4f5 wallet_ismine.h → script/ismine.h (Wladimir J. van der Laan)
f4eae2d test: Create test fixture for wallet (Wladimir J. van der Laan)
de39c95 test: move accounting_tests and rpc_wallet_tests to wallet/test (Wladimir J. van der Laan)
28b400f doc: update release-notes for `gettxoutsetinfo` change (Wladimir J. van der Laan)
76212bb rpc: make sure `gettxoutsetinfo` hash has txids (Wladimir J. van der Laan)
9ad1a51 crypto: bytes counts are 64 bit (Wladimir J. van der Laan)
Remove the mistaken assumption that GetKey returning false signifies
an internal database issue. It will return false when the key cannot
be deserialized into the (char,uint256) stanza, which indicates
that the cursor has reached a different kind of key.
Fixes bug #7890 introduced in #7756.
Without the newline I see "bein" where the two lines are concatenated:
Note that all inputs selected must be of standard form and P2SH scripts must *bein* the wallet using importaddress or addmultisigaddress (to calculate fees).
swap was using an incorrect condition to determine when to apply an optimization
(not swapping the full direct[] when swapping two indirect prevectors).
Rather than correct the optimization I'm removing it for simplicity. Removing
this optimization minutely improves performance in the typical (currently only)
usage of member swap(), which is swapping with a freshly value-initialized
object.
Fixes a bug in which pop_back did not call the deleted item's destructor.
Using the most general erase() implementation to implement all the others
prevents similar bugs because the coupling between deallocation and destructor
invocation only needs to be maintained in one place.
Also reduces duplication of complex memmove logic.
The key (transaction id for the following outputs) should be serialized
to the HashWriter.
This is a problem as it means different transactions in the same
position with the same outputs will potentially result in the same hash.
Fixes primary concern of #7758.
Break the circular dependency between main and txdb by:
- Moving `CBlockFileInfo` from `main.h` to `chain.h`. I think this makes
sense, as the other block-file stuff is there too.
- Moving `CDiskTxPos` from `main.h` to `txdb.h`. This type seems
specific to txdb.
- Pass a functor `insertBlockIndex` to `LoadBlockIndexGuts`. This leaves
it up to the caller how to insert block indices.
Byte counts for SHA256, SHA512, SHA1 and RIPEMD160 must be 64 bits.
`size_t` has a different size per platform, causing divergent results
when hashing more than 4GB of data.
Add a method Cursor() to CCoinsView that returns a cursor which can be
used to iterate over the whole UTXO set.
- rpc: Change gettxoutsetinfo to use new Cursor method
- txdb: Remove GetStats method - Now that GetStats is implemented in
terms of Cursor, remove it.
dde46d3 Merge script_valid and script_invalid tests (Pieter Wuille)
009b503 Get rid of expect in script_tests as it's implied by scripterror (Pieter Wuille)
76da761 Make script_error a mandatory 4th field for script_tests (Pieter Wuille)
269281b Fix some misconstructed tests (Pieter Wuille)
d03e466 Fix formatting of NOPs for generated script tests (Pieter Wuille)
c7c6641 Fix JSON pretty printing in script_tests (Pieter Wuille)
d12760b rpc-tests: handle KeyError nicely in test_framework.py (Rusty Russell)
85c807c getblockchaininfo: make bip9_softforks an object, not an array. (Rusty Russell)
We can't change "softforks", but it seems far more logical to use tags
in an object rather than using an "id" field in an array.
For example, to get the csv status before, you need to iterate the
array to find the entry with 'id' field equal to "csv":
jq '.bip9_softforks | map(select(.id == "csv"))[] | .status'
Now:
jq '.bip9_softforks.csv.status'
There is no issue with fork names being incompatible with JSON tags,
since we're selecting them ourselves.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previously we used the CInv that would be sent to the peer announcing the
transaction as the key, but using the txid instead allows us to decouple the
p2p layer from the application logic (which relies on this map to avoid
duplicate tx requests).
The lockorder potential deadlock detection works by remembering for each
lock A that is acquired while holding another B the pair (A,B), and
triggering a warning when (B,A) already exists in the table.
A and B in the above text are represented by pointers to the CCriticalSection
object that is acquired. This does mean however that we need to clean up the
table entries that refer to any critical section which is destroyed, as it
memory address can potentially be used for another unrelated lock in the future.
Implement this clean up by remembering not only the pairs in forward direction,
but also backward direction. This allows for fast iteration over all pairs that
use a deleted CCriticalSection in either the first or the second position.
The current tests for varint only check that
serialization-deserialization is a roundtrip. That is a useful test, but
it is also good to check for some exact bit patterns, to prevent a code
change that changes the serialization format from going undetected.
As the varint functions are templated, also check with different types.
da5fdbb Test relay of version 2 transactions (Suhas Daftuar)
5cb1d8a Tests: move get_bip9_status to util.py (Suhas Daftuar)
e4ba9f6 Version 2 transactions remain non-standard until CSV activates (Suhas Daftuar)
Currently, we're keeping a timeout for each requested block, starting
from when it is requested, with a correction factor for the number of
blocks in the queue.
That's unnecessarily complicated and inaccurate.
As peers process block requests in order, we can make the timeout for each
block start counting only when all previous ones have been received, and
have a correction based on the number of peers, rather than the total number
of blocks.
Two-line patch to make it possible to shut down bitcoind cleanly during
the initial ActivateBestChain.
Fixes#6459 (among other complaints).
To reproduce:
- shutdown bitcoind
- copy chainstate
- start bitcoind
- let the chain sync a bit
- shutdown bitcoind
- copy back old chainstate
- start bitcoind
- bitcoind will catch up with all blocks during Init()
(the `boost::this_thread::interruption_point` / `ShutdownRequested()`
dance is ugly, this should be refactored all over bitcoind at some point
when moving from boost::threads to c++11 threads, but it works...)
They claimed to be testing P2SH scripts with non-push scriptSigs, but
1) they were not enabling P2SH
2) they have push-only scriptSigs
Fix this, and add a few more related cases.
Split out methods to every module, apart from 'help' and 'stop' which
are implemented in rpcserver.cpp itself.
- This makes it easier to add or remove RPC commands - no longer everything that includes
rpcserver.h has to be rebuilt when there's a change there.
- Cleans up `rpc/server.h` by getting rid of the huge cluttered list of function definitions.
- Removes most of the bitcoin-specific code from rpcserver.cpp and .h.
Continues #7307 for the non-wallet.
Ubuntu 16.04 "xenial xerus" does not come with Python 2.x by default.
It is possible to install a python-2.7 package, but this has its own
problem: no `python` or `python2` symlink (see #7717).
This fixes the following scripts to work with python 3:
- `make check` (bctest,py, bitcoin-util-test.py)
- `make translate` (extract_strings_qt.py)
- `make symbols-check` (symbol-check.py)
- `make security-check` (security-check.py)
Explicitly call the python commands using $(PYTHON) instead
of relying on the interpreter line at the top of the scripts.
The build date does only makes sense for custom/self-compiled bitcoin-core versions because we are using static build-dates for our deterministic release builds.
Having a quick option to get the current datadir is much more valuable for debug purposes.
The "feefilter" p2p message is used to inform other nodes of your mempool min fee which is the feerate that any new transaction must meet to be accepted to your mempool. This will allow them to filter invs to you according to this feerate.
Creates the generatetoaddress rpc which is virtually identical to the generate rpc except that it takes an argument for the address to mine to. It does not rely on wallet functionality.
The mining code shared by generate and generatetoaddress has been moved to another method to reduce duplication.
fad8cfb [qa] mininode: Add and use CONSTs (MarcoFalke)
fa8cd46 [qa] Move create_tx() to util.py (MarcoFalke)
fad7dc8 [qa] wallet: speed up tests (MarcoFalke)
fa3a81a [tests] Extend util_ParseMoney test case (MarcoFalke)
This implements caching of ancestor state to each mempool entry, similar to
descendant tracking, but also including caching sigops-with-ancestors (as that
metric will be helpful to future code that implements better transaction
selection in CreatenewBlock).
The work limit served to prevent the descendant walking algorithm from doing
too much work by marking the parent transaction as dirty. However to implement
ancestor tracking, it's not possible to similarly mark those descendant
transactions as dirty without having to calculate them to begin with.
This commit removes the work limit altogether. With appropriate
chain limits (-limitdescendantcount) the concern about doing too much
work inside this function should be mitigated.
While trying to find a black/white version of the Bitcoin
logo for the organization I noticed the about.png is not
entirely black - it has some reflection. Remove this to make
it the same as other icons.
Also ran the icons through `contrib/devtools/optimize-pngs.py`,
so `chevron.png` was optimized too.
0ecb340 test: Script_error checking in script_invalid tests (Wladimir J. van der Laan)
2317ad7 test: Re-introduce JSON pretty printing in test builder (Wladimir J. van der Laan)
b0ff857 test: Move non-generated script_invalid test to the correct place (Wladimir J. van der Laan)
It looks like, TorController::disconnected_cb(TorControlConnection&
conn) gets called multiple times which results in multiple event_new().
Avoid this by creating the event only once in the constructore, and
deleting it only once in the destructor (thanks to Cory Fields for the
idea).
Replaces the fix by Jonas Schnelli in #7610, see discussion there.
Continues "Make logging for validation optional" from #6519.
The idea there was to remove all ERROR logging of rejected transaction,
and move it to one message in the class 'mempoolrej' which logs the
state message (and debug info). The superfluous ERRORs in the log
"terrify" users, see for example issue #5794.
Unfortunately a lot of new logging was introduced in #6871 (RBF) and
#7287 (misc refactoring). This pull updates that new code.
f22f14c doc: mention bitcoin-cli -stdin in release notes (Wladimir J. van der Laan)
92bcca3 rpc: Input-from-stdin mode for bitcoin-cli (Wladimir J. van der Laan)
Implements #7442 by adding an option `-stdin` which reads
additional arguments from stdin, one per line.
For example
```bash
echo -e "mysecretcode\n120" | src/bitcoin-cli -stdin walletpassphrase
echo -e "walletpassphrase\nmysecretcode\n120" | src/bitcoin-cli -stdin
```
BerkeleyDB dump files have key and value lines indented.
The salvage code passes these to ParseHex as-is.
Check this in the tests (should just pass with current code).
Check for EOF before every getline, and warn when reading gets to EOF
before the end of the data.
Stricter error checking could shed more light on issues such as #7463
and #7379.
- Replace NOP3 with CHECKSEQUENCEVERIFY (BIP112)
<nSequence> CHECKSEQUENCEVERIFY -> <nSequence>
- Fails if txin.nSequence < nSequence, allowing funds of a txout to be locked for a number of blocks or a duration of time after its inclusion in a block.
- Pull most of CheckLockTime() out into VerifyLockTime(), a local function that will be reused for CheckSequence()
- Add bitwise AND operator to CScriptNum
- Enable CHECKSEQUENCEVERIFY as a standard script verify flag
- Transactions that fail CSV verification will be rejected from the mempool, making it easy to test the feature. However blocks containing "invalid" CSV-using transactions will still be accepted; this is *not* the soft-fork required to actually enable CSV for production use.
Check the returned script_error. Add expected script_error
for generated as well as custom tests.
The specific error is not part of consensus, however
it could avoid unclear reporting issues such as #6862 in the future.
Fixes#7513.
SequenceLocks functions are used to evaluate sequence lock times or heights per BIP 68.
The majority of this code is copied from maaku in #6312
Further credit: btcdrak, sipa, NicolasDorier
If number of conflict confirms cannot be determined, this means
that the block is still unknown or not yet part of the main chain,
for example during a reindex. Do nothing in that case,
instead of crash with an assertion.
Fixes#7234.
This test is no longer relevant.
It was introduced in 8c222dca4f to check
the switch to 1MB blocks after the BDB too-many-locks issue back in
2013. The switching code has been long since removed.
It also needs a specific data file that is hard to find. I've verified
in #6320 that it still passes, however I think there is zero reason to
keep it.
Closes#6320.
A WWW-Authenticate header must be present in the 401
response to make clients know that they can authenticate,
and how.
WWW-Authenticate: Basic realm="jsonrpc"
Fixes#7462.
fad6244 ATMP: make nAbsurdFee const (MarcoFalke)
fa762d0 [wallet.h] Remove main.h include (MarcoFalke)
fa79db2 Move maxTxFee out of mempool (MarcoFalke)
027fdb8 When/if the copyright line does not mention Bitcoin Core developers, add a second line to copyrights in -version, About dialog, and splash screen (Luke Dashjr)
cc2095e Rewrite FormatParagraph to handle newlines within input strings correctly (Luke Dashjr)
cddffaf Bugfix: Include COPYRIGHT_HOLDERS_SUBSTITUTION in Makefile substitutions so it gets passed to extract-strings correctly (Luke Dashjr)
29598e4 Move PACKAGE_URL to configure.ac (Luke Dashjr)
78ec83d splashscreen: Resize text to fit exactly (Luke Dashjr)
3cae140 Bugfix: Actually use _COPYRIGHT_HOLDERS_SUBSTITUTION everywhere (Luke Dashjr)
4d5a3df Bugfix: gitian-descriptors: Add missing python-setuptools requirement for OS X (biplist module) (Luke Dashjr)
e4ab5e5 Bugfix: Correct copyright year in Mac DMG background image (Luke Dashjr)
917b1d0 Set copyright holders displayed in notices separately from the package name (Luke Dashjr)
c39a6ff Travis & gitian-osx: Use depends for ds_store and mac_alias modules (Luke Dashjr)
902ccde depends: Add mac_alias to depends (Luke Dashjr)
82a2d98 depends: Add ds_store to depends (Cory Fields)
de619a3 depends: Pass PYTHONPATH along to configure (Cory Fields)
e611b6e macdeploy: Use rsvg-convert rather than cairosvg (Luke Dashjr)
63bcdc5 More complicated package name substitution for Mac deployment (Luke Dashjr)
1a6c67c Parameterise 2009 in translatable copyright strings (Luke Dashjr)
d5f4683 Unify package name to as few places as possible without major changes (Luke Dashjr)
cf82d05 Build: Consensus: Make libbitcoinconsensus_la_SOURCES fully dynamic and dependend on both crypto and consensus packages (Jorge Timón)
4feadec Build: Libconsensus: Move libconsensus-ready files to the consensus package (Jorge Timón)
a3d5eec Build: Consensus: Move consensus files from common to its own module/package (Jorge Timón)
ProcessNewBlock would return failure early if CheckBlock failed, before
calling AcceptBlock. AcceptBlock also calls CheckBlock, and upon failure
would update mapBlockIndex to indicate that a block was failed. By returning
early in ProcessNewBlock, we were not marking blocks that fail a check in
CheckBlock as permanently failed, and thus would continue to re-request and
reprocess them.
This corrects a bug the case of tying group size where the code may
fail to select the group with the newest member. Since newest time
is the final selection criteria, failing to break ties on it
on the step before can undermine the final selection.
Tied netgroups are very common.
(cherry picked from commit 8e09f914f8ec66301257358b250e9a61befadd95)
With automatic tor HS support in place we should probably not be providing
absolute protection for local peers, since HS inbound could be used to
attack pretty easily. Instead, this counts on the latency metric inside
AttemptToEvictConnection to privilege actually local peers.
(cherry picked from commit 46dbcd4833115401fecbb052365b4c7725874414)
Previously didn't make clear that the ContextualCheckBlock* functions
meant the block headers as context - not the UTXO set itself - and that
ConnectBlock() also did UTXO-related validity checks (in the future we
may split that functionality into a separate UTXO-specific contextual
check block function).
Also, reordered to put validity checks first for better readability.
Also renames whitelistalwaysrelay.
Nodes relay all transactions from whitelisted peers, this
gets in the way of some useful reasons for whitelisting
peers-- for example, bypassing bandwidth limitations.
The purpose of this forced relaying is for specialized gateway
applications where a node is being used as a P2P connection
filter and multiplexer, but where you don't want it getting
in the way of (re-)broadcast.
This change makes it configurable with whitelistforcerelay.
43abb02 [Qt] Add a new chevron/arrow icon for the console prompt line (Jonas Schnelli)
56c9e66 [Qt] keep scroll position in GUI console after changing font size (Jonas Schnelli)
3a3a927 [Qt] Add option to increase/decrease font size in the console window (Jonas Schnelli)
"permit" is currently used to configure transaction filtering, whereas replacement is more to do with the memory pool state than the transaction itself.
Adds several unittests for CAddrMan and CAddrInfo.
Increases the accuracy of addrman tests.
Removes non-determinism in tests by overriding the random number generator.
Extracts testing code from addrman class to test class.
Add a configuration option `-permitrbf` to set transaction replacement policy
for the mempool.
Enabling it will enable (opt-in) RBF, disabling it will refuse all
conflicting transactions.
e8600c9 banlist (bugfix): allow CNode::SweepBanned() to run on interval (Philip Kaufmann)
2977c24 banlist: add more banlist infos to log / add GUI signal (Philip Kaufmann)
ce479aa banlist: better handling of banlist in StartNode() (Philip Kaufmann)
57c77fe banlist: update set dirty to be more fine grained (Philip Kaufmann)
Add "bip125-replaceable" output field to listtransactions and gettransaction
which indicates if an unconfirmed transaction, or any unconfirmed parent, is
signaling opt-in RBF according to BIP 125.
d11fc16 [Wallet] Call notification signal when a transaction is abandoned (Jonas Schnelli)
df0e222 Add RPC test for abandoned and conflicted transactions. (Alex Morcos)
01e06d1 Add new rpc call: abandontransaction (Alex Morcos)
9e69717 Make wallet descendant searching more efficient (Alex Morcos)
Unconfirmed transactions that are not in your mempool either due to eviction or other means may be unlikely to be mined. abandontransaction gives the wallet a way to no longer consider as spent the coins that are inputs to such a transaction. All dependent transactions in the wallet will also be marked as abandoned.
Due to include ordering, defining in one place was not enough to ensure correct
usage. Use global defines so that we don't have to worry abou this ordering.
Also add a comment in configure about the test.
fa33d97 [walletdb] Add missing LOCK() in Recover() for dummyWallet (MarcoFalke)
fa14d99 [qa] check if wallet or blochchain maintenance changes the balance (MarcoFalke)
fa0765d [qa] Cleanup wallet.py test (MarcoFalke)
If a new transaction will cause limitfreerelay
to be exceeded it should not be accepted
into the memory pool and the byte counter
should be updated only after the fact.
noexcept is default for destructors as of c++11. By throwing in reverselock's
destructor if it's lock has been tampered with, the likely result is
std::terminate being called. Indeed that happened before this change.
Once reverselock has taken another lock (its ctor didn't throw), it makes no
sense to try to grab or lock the parent lock. That is be broken/undefined
behavior depending on the parent lock's implementation, but it shouldn't cause
the reverselock to fail to re-lock when destroyed.
To avoid those problems, simply swap the parent lock's contents with a dummy
for the duration of the lock. That will ensure that any undefined behavior is
caught at the call-site rather than the reverse lock's destruction.
Barring a failed mutex unlock which would be indicative of a larger problem,
the destructor should now never throw.
This is ugly, but temporary. boost::filesystem will likely be dropped soon
after c++11 is enabled. Otherwise, we could simply roll our own copy_file. I've
fixed this at the buildsystem level for now in order to avoid mixing in
functional changes.
Explanation:
If boost (prior to 1.57) was built without c++11, it emulated scoped enums
using c++98 constructs. Unfortunately, this implementation detail leaked into
the abi. This was fixed in 1.57.
When building against that installed version using c++11, the headers pick up
on the native c++11 scoped enum support and enable it, however it will fail to
link. This can be worked around by disabling c++11 scoped enums if linking will
fail.
Add an autoconf test to determine incompatibility. At build-time, if native
enums are being used (a c++11 build), and force-disabling them causes a
successful link, we can be sure that there's an incompatibility and enable the
work-around.
Don't scan the wallet to see if the current key has been used if we're going to make a new key anyway.
Stop scanning the wallet as soon as we see that the current key has been used.
Don't call isValid() twice on the current key.
After discussion in #7164 I think this is better.
Max tip age was introduced in #5987 to make it possible to run
testnet-in-a-box. But associating this behavior with the testnet chain
is wrong conceptually, as it is not needed in normal usage.
Should aim to make testnet test the software as-is.
Replace it with a (debug) option `-maxtipage`, which can be
specified only in the specific case.
d812daf fix logic for error log (accraze)
c611acc wallet: check if tx scriptPubKey is unspendable (accraze)
b6915b8 checks for null data transaction before debug.log (accraze)
CWalletTx::GetAmounts could not find output address for null data transactions, thus issuing an error in debug.log. This change checks to see if the transaction is OP_RETURN before issuing error.
resolves#6142
We used to have a trickle node, a node which was chosen in each iteration of
the send loop that was privileged and allowed to send out queued up non-time
critical messages. Since the removal of the fixed sleeps in the network code,
this resulted in fast and attackable treatment of such broadcasts.
This pull request changes the 3 remaining trickle use cases by random delays:
* Local address broadcast (while also removing the the wiping of the seen filter)
* Address relay
* Inv relay (for transactions; blocks are always relayed immediately)
The code is based on older commits by Patrick Strateman.
- Avoids string typos (by making the compiler check)
- Makes it easier to grep for handling/generation of a certain message type
- Refer directly to documentation by following the symbol in IDE
- Move list of valid message types to protocol.cpp:
protocol.cpp is a more appropriate place for this, and having
the array there makes it easier to keep things consistent.
2041190 test: Add basic test for `reject` code (Wladimir J. van der Laan)
9fc6ed6 net: Fix sent reject messages for blocks and transactions (Wladimir J. van der Laan)
fc0f52d Added a test for the pruning of extraneous inputs after ApproximateBestSet (Murch)
af9510e Moved set reduction to the end of ApproximateBestSubset to reduce performance impact (Murch)
5c03483 Coinselection prunes extraneous inputs from ApproximateBestSubset (AlSzacrel)
Some extra bytes in libconsensus to get all the crypto (except for signing, which is in the common module) below the libconsensus future independent repo (that has libsecp256k1 as a subtree).
hmac_sha256.o seems to be the only thing libbitcoinconsensus doesn't depend on from crypto, some more bytes for the final libconsensus: I'm not personally worried.
A further pass over the available inputs has been added to ApproximateBestSubset after a candidate set has been found. It will prune any extraneous inputs in the selected subset, in order to decrease the number of input and the resulting change.
Mempool requests use a fair amount of bandwidth when the mempool is large,
disconnecting peers using them follows the same logic as disconnecting
peers fetching historical blocks.
aa4b0c2 When not filtering blocks, getdata sends more in one test (Pieter Wuille)
d41e44c Actually only use filterInventoryKnown with MSG_TX inventory messages. (Gregory Maxwell)
b6a0da4 Only use filterInventoryKnown with MSG_TX inventory messages. (Patick Strateman)
6b84935 Rename setInventoryKnown filterInventoryKnown (Patick Strateman)
e206724 Remove mruset as it is no longer used. (Gregory Maxwell)
ec73ef3 Replace setInventoryKnown with a rolling bloom filter. (Gregory Maxwell)
One test in AcceptToMemoryPool was to compare a transaction's fee
agains the value returned by GetMinRelayFee. This value was zero for
all small transactions. For larger transactions (between
DEFAULT_BLOCK_PRIORITY_SIZE and MAX_STANDARD_TX_SIZE), this function
was preventing low fee transactions from ever being accepted.
With this function removed, we will now allow transactions in that range
with fees (including modifications via PrioritiseTransaction) below
the minRelayTxFee, provided that they have sufficient priority.
Redo the feerate index to be based on mining score, rather than fee.
Update mempool_packages.py to test prioritisetransaction's effect on
package scores.
