b7cd08b71 Add documentation to PeerLogicValidation interface and related functions (James O'Beirne)
Pull request description:
Adds docs for PeerLogicValidation's public interface and two related functions.
Tree-SHA512: b4c2f47e9baa9396d2b6faf3792e46b371c50cd91b9ac890f263f4d14eb24a71e7b40ceb4cbb41e254f5008eff357f417b842618e7ebece9039802ab2a5dd728
e68172ed9 Add test-before-evict discipline to addrman (Ethan Heilman)
Pull request description:
This change implement countermeasures 3 (test-before-evict) suggested in our paper: ["Eclipse Attacks on Bitcoin’s Peer-to-Peer Network"](http://cs-people.bu.edu/heilman/eclipse/).
# Design:
A collision occurs when an address, addr1, is being moved to the tried table from the new table, but maps to a position in the tried table which already contains an address (addr2). The current behavior is that addr1 would evict addr2 from the tried table.
This change ensures that during a collision, addr1 is not inserted into tried but instead inserted into a buffer (setTriedCollisions). The to-be-evicted address, addr2, is then tested by [a feeler connection](https://github.com/bitcoin/bitcoin/pull/8282). If addr2 is found to be online, we remove addr1 from the buffer and addr2 is not evicted, on the other hand if addr2 is found be offline it is replaced by addr1.
An additional small advantage of this change is that, as no more than ten addresses can be in the test buffer at once, and addresses are only cleared one at a time from the test buffer (at 2 minute intervals), thus an attacker is forced to wait at least two minutes to insert a new address into tried after filling up the test buffer. This rate limits an attacker attempting to launch an eclipse attack.
# Risk mitigation:
- To prevent this functionality from being used as a DoS vector, we limit the number of addresses which are to be tested to ten. If we have more than ten addresses to test, we drop new addresses being added to tried if they would evict an address. Since the feeler thread only creates one new connection every 2 minutes the additional network overhead is limited.
- An address in tried gains immunity from tests for 4 hours after it has been tested or successfully connected to.
# Tests:
This change includes additional addrman unittests which test this behavior.
I ran an instance of this change with a much smaller tried table (2 buckets of 64 addresses) so that collisions were much more likely and observed evictions.
```
2016-10-27 07:20:26 Swapping 208.12.64.252:8333 for 68.62.95.247:8333 in tried table
2016-10-27 07:20:26 Moving 208.12.64.252:8333 to tried
```
I documented tests we ran against similar earlier versions of this change in #6355.
# Security Benefit
This is was originally posted in PR #8282 see [this comment for full details](https://github.com/bitcoin/bitcoin/pull/8282#issuecomment-237255215).
To determine the security benefit of these larger numbers of IPs in the tried table I modeled the attack presented in [Eclipse Attacks on Bitcoin’s Peer-to-Peer Network](https://eprint.iacr.org/2015/263).
**Default node:** 595 attacker IPs for ~50% attack success.
**Default node + test-before-evict:** 620 attacker IPs for ~50% attack success.
**Feeler node:** 5540 attacker IPs for ~50% attack success.
**Feeler node + test-before-evict:** 8600 attacker IPs for ~50% attack success.
The node running feeler connections has 10 times as many online IP addresses in its tried table making an attack 10 times harder (i.e. requiring the an attacker require 10 times as many IP addresses in different /16s). Adding test-before-evict increases resistance of the node by an additional 3000 attacker IP addresses.
Below I graph the attack over even greater attacker resources (i.e. more attacker controled IP addresses). Note that test-before-evict maintains some security far longer even against an attacker with 50,000 IPs. If this node had a larger tried table test-before-evict could greatly boost a nodes resistance to eclipse attacks.
Tree-SHA512: fdad4d26aadeaad9bcdc71929b3eb4e1f855b3ee3541fbfbe25dca8d7d0a1667815402db0cb4319db6bd3fcd32d67b5bbc0e12045c4252d62d6239b7d77c4395
6fbc0986f gui: Show messages as text not html (Wladimir J. van der Laan)
Pull request description:
Currently, error messages (such as InitError) are displayed as-is, which means Qt does auto detection on the format.
This means that it's possible to inject HTML from the command line though e.g. specifying a wallet name with HTML in it. This isn't a direct security risk because fetching content from internet is
disabled (and as far as I know we never report strings received from the network this way). However, it can be confusing.
So explicitly force the format as text.
Tree-SHA512: 96c9196f20552544b862071bca61817ef03653019cc3548023d435f3a9c48b6cd501fab3246783cb0be68c8c7bb1b865913d92070a7c4e84e82c6577709f0934
cfaac2a60 Add build support for 'gprof' profiling. (murrayn)
Pull request description:
Support for profiling build: `./configure --enable-profiling`
Tree-SHA512: ea983cfce385f1893bb4ab7f94ac141b7d620951dc430da3bbc92ae1357fb05521eac689216e66dc87040171a8a57e76dd7ad98036e12a2896cfe5ab544347f0
937bf4335 Use std:🧵:hardware_concurrency, instead of Boost, to determine available cores (fanquake)
Pull request description:
Following discussion on IRC about replacing Boost usage for detecting available system cores, I've opened this to collect some benchmarks + further discussion.
The current method for detecting available cores was introduced in #6361.
Recap of the IRC chat:
```
21:14:08 fanquake: Since we seem to be giving Boost removal a good shot for 0.15, does anyone have suggestions for replacing GetNumCores?
21:14:26 fanquake: There is std:🧵:hardware_concurrency(), but that seems to count virtual cores, which I don't think we want.
21:14:51 BlueMatt: fanquake: I doubt we'll do boost removal for 0.15
21:14:58 BlueMatt: shit like BOOST_FOREACH, sure
21:15:07 BlueMatt: but all of boost? doubtful, there are still things we need
21:16:36 fanquake: Yea sorry, not the whole lot, but we can remove a decent chunk. Just looking into what else needs to be done to replace some of the less involved Boost usage.
21:16:43 BlueMatt: fair
21:17:14 wumpus: yes, it makes sense to plan ahead a bit, without immediately doing it
21:18:12 wumpus: right, don't count virtual cores, that used to be the case but it makes no sense for our usage
21:19:15 wumpus: it'd create a swarm of threads overwhelming any machine with hyperthreading (+accompanying thread stack overhead), for script validation, and there was no gain at all for that
21:20:03 sipa: BlueMatt: don't worry, there is no hurry
21:59:10 morcos: wumpus: i don't think that is correct
21:59:24 morcos: suppose you have 4 cores (8 virtual cores)
21:59:24 wumpus: fanquake: indeed seems that std has no equivalent to physical_concurrency, on any standard. That's annoying as it is non-trivial to implement
21:59:35 morcos: i think running par=8 (if it let you) would be notably faster
21:59:59 morcos: jeremyrubin and i discussed this at length a while back... i think i commented about it on irc at the time
22:00:21 wumpus: morcos: I think the conclusion at the time was that it made no difference, but sure would make sense to benchmark
22:00:39 morcos: perhaps historical testing on the virtual vs actual cores was polluted by concurrency issues that have now improved
22:00:47 wumpus: I think there are not more ALUs, so there is not really a point in having more threads
22:01:40 wumpus: hyperthreads are basically just a stored register state right?
22:02:23 sipa: wumpus: yes but it helps the scheduler
22:02:27 wumpus: in which case the only speedup using "number of cores" threads would give you is, possibly, excluding other software from running on the cores on the same time
22:02:37 morcos: well this is where i get out of my depth
22:02:50 sipa: if one of the threads is waiting on a read from ram, the other can use the arithmetic unit for example
22:02:54 morcos: wumpus: i'm pretty sure though that the speed up is considerably more than what you might expect from that
22:02:59 wumpus: sipa: ok, I back down, I didn't want to argue this at all
22:03:35 morcos: the reason i haven't tested it myself, is the machine i usually use has 16 cores... so not easy due to remaining concurrency issues to get much more speedup
22:03:36 wumpus: I'm fine with restoring it to number of virtual threads if that's faster
22:03:54 morcos: we should have somene with 4 cores (and  actually test it though, i agree
22:03:58 sipa: i would expect (but we should benchmark...) that if 8 scriot validation threads instead of 4 on a quadcore hyperthreading is not faster, it's due to lock contention
22:04:20 morcos: sipa: yeah thats my point, i think lock contention isn't that bad with 8 now
22:04:22 wumpus: on 64-bit systems the additional thread overhead wouldn't be important at least
22:04:23 gmaxwell: I previously benchmarked, a long time ago, it was faster.
22:04:33 gmaxwell: (to use the HT core count)
22:04:44 wumpus: why was this changed at all then?
22:04:47 wumpus: I'm confused
22:05:04 sipa: good question!
22:05:06 gmaxwell: I had no idea we changed it.
22:05:25 wumpus: sigh 
22:05:54 gmaxwell: What PR changed it?
22:06:51 gmaxwell: In any case, on 32-bit it's probably a good tradeoff... the extra ram overhead is worth avoiding.
22:07:22 wumpus: https://github.com/bitcoin/bitcoin/pull/6361
22:07:28 gmaxwell: PR 6461 btw.
22:07:37 gmaxwell: er lol at least you got it right.
22:07:45 wumpus: the complaint was that systems became unsuably slow when using that many thread
22:07:51 wumpus: so at least I got one thing right, woohoo
22:07:55 sipa: seems i even acked it!
22:07:57 BlueMatt: wumpus: there are more alus
22:08:38 BlueMatt: but we need to improve lock contention first
22:08:40 morcos: anywya, i think in the past the lock contention made 8 threads regardless of cores a bit dicey.. now that is much better (although more still to be done)
22:09:01 BlueMatt: or we can just merge #10192, thats fee
22:09:04 gribble: https://github.com/bitcoin/bitcoin/issues/10192 | Cache full script execution results in addition to signatures by TheBlueMatt · Pull Request #10192 · bitcoin/bitcoin · GitHub
22:09:11 BlueMatt: s/fee/free/
22:09:21 morcos: no, we do not need to improve lock contention first. but we should probably do that before we increase the max beyond 16
22:09:26 BlueMatt: then we can toss concurrency issues out the window and get more speedup anyway
22:09:35 gmaxwell: wumpus: yea, well in QT I thought we also diminished the count by 1 or something? but yes, if the motivation was to reduce how heavily the machine was used, thats fair.
22:09:56 sipa: the benefit of using HT cores is certainly not a factor 2
22:09:58 wumpus: gmaxwell: for the default I think this makes a lot of sense, yes
22:10:10 gmaxwell: morcos: right now on my 24/28 physical core hosts going beyond 16 still reduces performance.
22:10:11 wumpus: gmaxwell: do we also restrict the maximum par using this? that'd make less sense
22:10:51 wumpus: if someone *wants* to use the virtual cores they should be able to by setting -par=
22:10:51 sipa: *flies to US*
22:10:52 BlueMatt: sipa: sure, but the shared cache helps us get more out of it than some others, as morcos points out
22:11:30 BlueMatt: (because it means our thread contention issues are less)
22:12:05 morcos: gmaxwell: yeah i've been bogged down in fee estimation as well (and the rest of life) for a while now.. otherwise i would have put more effort into jeremy's checkqueue
22:12:36 BlueMatt: morcos: heh, well now you can do other stuff while the rest of us get bogged down in understanding fee estimation enough to review it 
22:12:37 wumpus: [to answer my own question: no, the limit for par is MAX_SCRIPTCHECK_THREADS, or 16]
22:12:54 morcos: but to me optimizing for more than 16 cores is pretty valuable as miners could use beefy machines and be less concerned by block validation time
22:14:38 BlueMatt: morcos: i think you may be surprised by the number of mining pools that are on VPSes that do not have 16 cores 
22:15:34 gmaxwell: I assume right now most of the time block validation is bogged in the parts that are not as concurrent. simple because caching makes the concurrent parts so fast. (and soon to hopefully increase with bluematt's patch)
22:17:55 gmaxwell: improving sha2 speed, or transaction malloc overhead are probably bigger wins now for connection at the tip than parallelism beyond 16 (though I'd like that too).
22:18:21 BlueMatt: sha2 speed is big
22:18:27 morcos: yeah lots of things to do actually...
22:18:57 gmaxwell: BlueMatt: might be a tiny bit less big if we didn't hash the block header 8 times for every block. 
22:21:27 BlueMatt: ehh, probably, but I'm less rushed there
22:21:43 BlueMatt: my new cache thing is about to add a bunch of hashing
22:21:50 BlueMatt: 1 sha round per tx
22:22:25 BlueMatt: and sigcache is obviously a ton
```
Tree-SHA512: a594430e2a77d8cc741ea8c664a2867b1e1693e5050a4bbc8511e8d66a2bffe241a9965f6dff1e7fbb99f21dd1fdeb95b826365da8bd8f9fab2d0ffd80d5059c
Changes addrman to use the test-before-evict discipline in which an
address is to be evicted from the tried table is first tested and if
it is still online it is not evicted.
Adds tests to provide test coverage for this change.
This change was suggested as Countermeasure 3 in
Eclipse Attacks on Bitcoin’s Peer-to-Peer Network, Ethan Heilman,
Alison Kendler, Aviv Zohar, Sharon Goldberg. ePrint Archive Report
2015/263. March 2015.
Currently, error messages (such as InitError) are displayed as-is, which
means Qt does auto detection on the format.
This means that it's possible to inject HTML from the command line
though e.g. specifying a wallet name with HTML in it. This isn't
a direct security risk because fetching content from internet is
disabled (and as far as I know we never report strings received
from the network this way). However, it can be confusing.
So explicitly force the format as text.
741f0177c Add DynamicMemoryUsage() to LevelDB (Evan Klitzke)
Pull request description:
This adds a new method `CDBWrapper::DynamicMemoryUsage()` similar to Bitcoin's existing methods of the same name. It's implemented by asking LevelDB for the information, and then parsing the string response. I've also added logging to `CDBWrapper::WriteBatch()` to track this information:
```
$ tail -f ~/.bitcoin/testnet3/debug.log | grep WriteBatch
2018-03-05 19:34:55 WriteBatch memory usage: db=chainstate, before=0.0MiB, after=0.0MiB
2018-03-05 19:35:17 WriteBatch memory usage: db=index, before=0.0MiB, after=0.0MiB
2018-03-05 19:35:17 WriteBatch memory usage: db=chainstate, before=0.0MiB, after=8.0MiB
2018-03-05 19:35:22 WriteBatch memory usage: db=index, before=0.0MiB, after=0.0MiB
2018-03-05 19:35:22 WriteBatch memory usage: db=chainstate, before=8.0MiB, after=17.0MiB
2018-03-05 19:35:26 WriteBatch memory usage: db=index, before=0.0MiB, after=0.0MiB
2018-03-05 19:35:27 WriteBatch memory usage: db=chainstate, before=9.0MiB, after=18.0MiB
2018-03-05 19:35:40 WriteBatch memory usage: db=index, before=0.0MiB, after=0.0MiB
2018-03-05 19:35:41 WriteBatch memory usage: db=chainstate, before=9.0MiB, after=7.0MiB
2018-03-05 19:35:52 WriteBatch memory usage: db=index, before=0.0MiB, after=0.0MiB
2018-03-05 19:35:52 WriteBatch memory usage: db=chainstate, before=7.0MiB, after=9.0MiB
^C
```
As LevelDB doesn't seem to provide a way to get the database name, I've also added a new `m_name` field to the `CDBWrapper`. This is necessary because we have multiple LevelDB databases (two now, and possibly more later, e.g. #11857).
I am using this information in other branches where I'm experimenting with changing LevelDB buffer sizes.
Tree-SHA512: 7ea8ff5484bb07ef806af17d000c74ccca27d2e0f6c3229e12d93818f00874553335d87428482bd8acbcae81ea35aef2a243326f9fccbfac25989323d24391b4
874e81808 Allow dustrelayfee to be set to zero (Luke Dashjr)
Pull request description:
I don't see and can't think of any rationale for forbidding this configuration.
Tree-SHA512: df09441f4aec63e79bea94838b7f8e336cebaeb0a22b5e58d27937bbeb1377f229921aeae43674e0b63fc40a39ae51a264d48aa1cdb4cbd0e3339d32856698bf
9c5a4a6ed Stop special-casing phashBlock handling in validation for TBV (Matt Corallo)
Pull request description:
There is no reason to do this, really, we already have "ignore PoW" flags. Motivated by https://github.com/bitcoin/bitcoin/pull/11739#discussion_r155841721
Tree-SHA512: 37cb1ae5b11c9e8ed7a679bb07ad3b119a2a014744b26d197d67ba21beb19fe6815271df935e40f7c7bd5f2e4d7ae4dad7bd4d00fa230a8d789f37e9de31a769
0bc095efd [qt] Improved "custom fee" explanation in tooltip (Randolf Richardson)
Pull request description:
Thanks to @dooglus for asking about this tooltip in Issue 12500.
Reference: https://www.github.com/bitcoin/bitcoin/issues/12500
I would also appreciate it if someone can confirm that 1 kilobyte in this field indeed represents 1,000 bytes rather than 1,024 bytes (if it's supposed to be 1,024, then I'll gladly make the necessary changes to reflect this).
Tree-SHA512: da2fe0128411b5ef6f0a26382a80601efcf823c3f3591bdd83a7fe7e25777728e7eb89e2e8b175b991566e63838aca12d204792f981031b86e7b2ba28ca50021
9360f5032 Drop extra script variable in ProduceSignature (Russell Yanofsky)
Pull request description:
Was slightly confusing.
Tree-SHA512: 1d18f92c133772ffc8eb71826c8d778988839a14bcefc50f9c591111b0a5f81ebc12bca0f1ab25d5fdd02d3d50c2325c04cbfcbdcd18a7b80ca112d049c2327d
2736c9e05 Avoid unintentional unsigned integer wraparounds in tests (practicalswift)
Pull request description:
Avoid unintentional unsigned integer wraparounds in tests.
This is a subset of #11535 as suggested by @MarcoFalke :-)
Tree-SHA512: 4f4ee8a08870101a3f7451aefa77ae06aaf44e3c3b2f7555faa2b8a8503f97f34e34dffcf65154278f15767dc9823955f52d1aa7b39930b390e57cdf2b65e0f3
18307849b Consensus: Fix bug when compiler do not support __builtin_clz* (532479301)
Pull request description:
#ifdef is not correct since defination is defined to 0 or 1. Should change to #if
Tree-SHA512: ba13a591d28f4d7d6ebaab081be4304c43766a611226f8d2994c8db415dfcf318e82217d26a8c4af290760c68eded9503b39535b0e6e079ded912e6a8fca5b36
fa9461473 [doc] dev-notes: Members should be initialized (MarcoFalke)
Pull request description:
Also, remove mention of threads that were removed long ago.
Motivation:
Make it easier to spot bugs such as #11654 and #12426
Tree-SHA512: 8ca1cb54e830e9368803bd98a8b08c39bf2d46f079094ed7e070b32ae15a6e611ce98d7a614f897803309f4728575e6bc9357fab1157c53d2536417eb8271653
The call to CheckBlock() in ConnectBlock() is redundant with calls to it
prior to storing a block on disk. If CheckBlock() fails with an error
indicating the block is potentially corrupted, then shut down
immediately, as this is an indication that the node is experiencing
hardware issues. (If we didn't shut down, we could go into an infinite
loop trying to reconnect this same bad block, as we're not setting the
block's status to FAILED in the case where there is potential
corruption.)
If CheckBlock() fails for some other reason, we'll end up flagging this
block as bad (perhaps some prior software version "let a bad block in",
as the comment indicates), and not trying to connect it again, so this
case should be properly handled.
ee041196fc Show a transaction's virtual size in its details dialog. (Chris Moore)
Pull request description:
#12501 looks like it is going to mention transaction's "virtual size" in the custom fee tooltip, so let's display the virtual size when the user double-clicks a transaction.
Tree-SHA512: c60ae23c9f86edfba086b840519941d8e8ee1be9da5987ffe6dee3255943ea5d215708ce57464f109a1d1c612c4c0eeb11f8f3e203d8a8cfc1f8ec753a8aac27
This change should make it easier for users to make complete backups of wallets
because they can now just back up the specified `-wallet=<path>` path directly,
instead of having to back up the specified path as well as the transaction log
directory (for incompletely flushed wallets).
Another advantage of this change is that if two wallets are located in the same
directory, they will now use their own BerkeleyDB environments instead using a
shared environment. Using a shared environment makes it difficult to manage and
back up wallets separately because transaction log files will contain a mix of
data from all wallets in the environment.
Remove requirement that two wallet files can only be opened at the same time if
they are contained in the same directory.
This change mostly consists of updates to function signatures (updating
functions to take fs::path arguments, instead of combinations of strings,
fs::path, and CDBEnv / CWalletDBWrapper arguments).
New global variables were introduced in #11882 and not setting them causes:
wallet/test/wallet_tests.cpp(638): error in "ListCoins": check wallet->CreateTransaction({recipient}, wtx, reservekey, fee, changePos, error, dummy) failed
wallet/test/wallet_tests.cpp(679): error in "ListCoins": check list.begin()->second.size() == 2 failed [1 != 2]
wallet/test/wallet_tests.cpp(686): error in "ListCoins": check available.size() == 2 failed [1 != 2]
wallet/test/wallet_tests.cpp(705): error in "ListCoins": check list.begin()->second.size() == 2 failed [1 != 2]
It's possible to reproduce the failure reliably by running:
src/test/test_bitcoin --log_level=test_suite --run_test=wallet_tests/ListCoins
Failures happen nondeterministically because boost test framework doesn't run
tests in a specified order, and tests that run previously can set the global
variables and mask the bug.
3f592b8 [QA] add wallet-rbf test (Jonas Schnelli)
8222e05 Disable wallet fallbackfee by default on mainnet (Jonas Schnelli)
Pull request description:
Removes the default fallback fee on mainnet (but keeps it on testnet/regtest).
Transactions using the fallbackfee in case the fallback fee has not been set are getting rejected.
Tree-SHA512: e54d2594b7f954e640cc513a18b0bfbe189f15e15bdeed4fe02b7677f939bca1731fef781b073127ffd4ce08a595fb118259b8826cdaa077ff7d5ae9495810db
eb91835 Add setter for g_initial_block_download_completed (Jonas Schnelli)
3f56df5 [QA] add NODE_NETWORK_LIMITED address relay and sync test (Jonas Schnelli)
158e1a6 [QA] fix mininode CAddress ser/deser (Jonas Schnelli)
fa999af [QA] Allow addrman loopback tests (add debug option -addrmantest) (Jonas Schnelli)
6fe57bd Connect to peers signaling NODE_NETWORK_LIMITED when out-of-IBD (Jonas Schnelli)
31c45a9 Accept addresses with NODE_NETWORK_LIMITED flag (Jonas Schnelli)
Pull request description:
Eventually connect to peers signalling NODE_NETWORK_LIMITED if we are out of IBD.
Accept and relay NODE_NETWORK_LIMITED peers in addrman.
Tree-SHA512: 8a238fc97f767f81cae1866d6cc061390f23a72af4a711d2f7158c77f876017986abb371d213d1c84019eef7be4ca951e8e6f83fda36769c4e1a1d763f787037
e7d9fc5 [qt] navigate to transaction history page after send (Sjors Provoost)
Pull request description:
Before this change QT just remained on the Send tab, which I found confusing. Now it switches to the Transactions tab. This makes it more clear to the user that the send actually succeeded, and here they can monitor progress.
Ideally I would like to highlight the transaction, e.g. by refactoring `TransactionView::focusTransaction(const QModelIndex &idx)` to accept a transaction hash, but I'm not sure how to do that.
Tree-SHA512: 8aa93e03874de8434e18951f8aec47377814c0bcaf7eda4766fc41d5a4e32806346e12e4139e4d45468dfdf0b786f5a7faa393a31b8cd6c65ccac21fb3782c33
5aad635 Use memset() to optimize prevector::resize() (Evan Klitzke)
e46be25 Reduce redundant code of prevector and speed it up (Akio Nakamura)
f0e7aa7 Add new prevector benchmarks. (Evan Klitzke)
Pull request description:
This branch optimizes various `prevector` operations, especially resizing vectors. While profiling the `loadblk` thread I noticed that a lot of time was being spent in `prevector::resize()` which led to this work. I have some data here indicating that it takes up **37%** of the time in `ReadBlockFromDisk()`: https://monad.io/readblockfromdisk.svg
This branch improves things significantly. For trivial types, the new results for the prevector benchmark are:
* `PrevectorClearTrivial` which tests `prevector::clear()` becomes 24.6x faster
* `PrevectorDestructorTrivial` which tests `prevector::~prevector()` becomes 20.5x faster
* `PrevectorResizeTrivial` which tests `prevector::resize()` becomes 20.3x faster
Note that in practice it looks like the prevector is only used to contain `unsigned char` types, which is a trivial type. The benchmarks are testing a bit of an extreme case, but the changes here are motivated by the profiling data for `ReadBlockFromDisk()` I linked to above.
The pull request here consists of a series of three commits:
* The first adds new benchmarks but does not change the prevector code.
* The second is from @AkioNak , and merges some prevector optimizations he submitted in #11988
* The third optimizes `prevector::resize()` to use `memset()` when the prevector contains trivially constructible types
Tree-SHA512: 28f7cbb91a19f9f43b6a5942781d7eb2e3197389186b666f086b69df12bee37773140f765426d715bfb8ebff79cb27a5f1206d0325b54b4aa65598b50fb18368
From the header include guidelines (developer-notes.md):
"One exception is that a `.cpp` file does not need to re-include the
includes already included in its corresponding `.h` file."
* rpc/util.h includes pubkey.h + utilstrencodings.h. rpc/util.cpp includes rpc/util.h.
* util.h includes fs.h. util.cpp includes util.h.
Further optimize prevector::resize() (which is called by a number of
other prevector methods) to use memset to initialize memory when the
prevector contains trivial types.
In prevector.h, the code which like item_ptr(size()) apears in the loop.
Both item_ptr() and size() judge whether values are held directly or
indirectly, but in most cases it is sufficient to make that judgement
once outside the loop.
This PR adds 2 private function fill() which has the loop to initialize
by specified value (or iterator of the other prevector's element),
but don't call item_ptr() in their loop.
Other functions(assign(), constructor, operator=(), insert())
that has similar loop, call fill() instead of original loop.
Also, resize() was changed like fill(), but it calls the default
constructor for that element each time.
90ba2df11 Fix missing cs_main lock for GuessVerificationProgress() (Jonas Schnelli)
Pull request description:
`GuessVerificationProgress()` needs `cs_main` due to accessing the `pindex->nChainTx`.
This adds a `AssertLockHeld` in `GuessVerificationProgress()` and adds the missing locks in...
* `LoadChainTip()`
* `ScanForWalletTransactions()` (got missed in #11281)
* GUI, `ClientModel::getVerificationProgress()` <--- **this may have GUI performance impacts**, but could be relaxed later with a cache or something more efficient.
Tree-SHA512: 13302946571422375f32af8e396b9d2c1180f2693ea363aeba9e98c8266ddec64fe7862bfdcbb5a93a4b12165a61eec1e51e4e7d7a8515fa50879095dc163412
Allow importmulti RPC to apply address labels when importing standard
scriptPubKeys. This makes the importmulti RPC less finnicky about import
formats and also simpler internally.
835a21b Squashed 'src/leveldb/' changes from c521b3ac65..64052c76c5 (MarcoFalke)
Pull request description:
Pull in changes from https://github.com/bitcoin/bitcoin/pull/11674#issuecomment-348174674.
Merges cleanly into master and 0.16 branch.
Tree-SHA512: 819c042c0dfac8dc3078fc182c1e22d4a85b343967475d3389be5b5b056361114d8c9892437cd1dc4b45808c27880c0e166e047afc2c2bd2bbc33e55336a8c33
d2ee6e3 init: Remove translation for `-blockmaxsize` option help (Wladimir J. van der Laan)
Pull request description:
Move `-blockmaxsize`, a deprecated option which is replaced by `-blockmaxweight`, to debug options and remove the translation.
This message is absolutely terrible for translators (esp the `* 4` part).
(for 0.17 we should probably remove this option completely?)
(reported by French Language Coordinator)
Tree-SHA512: 379150c9217672d2f2f93b4c02a3ac638e77ca56fb518e30c56c46d59f89eac422b4f540e70a9abd3c6ad653ac4b786d4734621b18f93804885d81e223f1a908
a6e6e39a8b Bugfix: respect user defined configuration file (-conf) when open conf. file from QT settings (Jonas Schnelli)
Pull request description:
Fixes#12488.
In master, opening the configuration file from the GUI settings will always open the file "bitcoin.conf" regardless of the `-conf=` settings.
This PR makes the GUI settings open configuration file function respect the `-conf` option.
Tree-SHA512: fb54cc699b4d2a3947f749fdf5f1a51251ffd67d0f6c6a937a5b80f0ba5a5c1085d0eef190453bbc04696d4d76c2c266de0fe9712e65e4bb36116158b54263d4
Move `-blockmaxsize`, a deprecated option which is replaced by
`-blockmaxweight`, to debug options and remove the translation.
This message is absolutely terrible for translators (esp the `* 4`
part).
Splits signrwatransaction into a wallet version (signrawtransactionwithwallet) and
non-wallet version (signrawtransactionwithkey). signrawtransaction is marked as DEPRECATED
and will call the right signrawtransaction* command as per the parameters in order to
maintain compatibility.
Updated signrawtransactions test to use new RPCs
b22cce014 scripted-diff: validateaddress to getaddressinfo in tests (Andrew Chow)
b98bfc5ed Create getaddressinfo RPC and deprecate parts of validateaddress (Andrew Chow)
1598f3230 [rpc] Move DescribeAddressVisitor to rpc/util (John Newbery)
39633ecd5 [rpc] split wallet and non-wallet parts of DescribeAddressVisitor (John Newbery)
Pull request description:
This PR makes a new RPC command called `getaddressinfo` which relies on the wallet. It contains all of `validateaddress`'s address info stuff. Those parts in `validateaddress` have been marked as deprecated. The tests have been updated to use `getaddressinfo` except the `disablewallet` test which is the only test that actually uses `validateaddress` to validate an address.
Tree-SHA512: ce00ed0f2416200b8de1e0a75e8517c024be0b6153457d302c3879b3491cce28191e7c29aed08ec7d2eeeadc62918f5c43a7cb79cd2e4b6d9291bd83ec31c852
Previously this was an inline test where the specificity was probably judged
overly specific. As a class method it makes sense to maintain consistency.
And replace some magic values with their constant equivalents.
Moves the parts of validateaddress which require the wallet into getaddressinfo
which is part of the wallet RPCs. Mark those parts of validateaddress which
require the wallet as deprecated.
Validateaddress will call getaddressinfo
for the data that both share for right now.
Moves IsMine functions to libbitcoin_common and then links libbitcoin_wallet
before libbitcoin_common in order to prevent linker errors since IsMine is no
longer used in libbitcoin_server.
Previously, if `invalidateblock` was called on a block in a branch,
NotifyBlockTip would be called on that block's predecessor, creating an
incorrect `rpc/blockchain.cpp:latestblock` value.
Only call NotifyBlockTip if the chain being modified is activeChain.
be45a67 Add some script tests related to BOOL ops and odd values like negative 0. (Richard Kiss)
Pull request description:
Add some script tests related to BOOL ops and odd values like negative 0.
Tree-SHA512: 8e633f7ea5eea39e31016994baf60f295fa1dc8cae27aa5fcfc741ea97136bfb3ddc57bb62b9c6bf9fe256fc09cdd184906ba8e611e297cf8d2d363da2bbf1d4
5f605e1 Make signrawtransaction accept P2SH-P2WSH redeemscripts (Pieter Wuille)
Pull request description:
This is a quick fix for #12418, which is a regression in 0.16.
It permits specifying just the inner redeemscript to let `signrawtransaction` succeed. This inner redeemscript is already reported by `addmultisigaddress` & co.
#11708 uses a different approach, where `listunspent` reports both inner & outer redeemscript, but requires both to be provided to `signrawtransaction`. Part of #11708 is still needed even in combination with this PR however, as currently the inner redeemscript isn't reported by `listunspent`.
Tree-SHA512: a6fa2b2661ce04db25cf029dd31da39c0b4811d43692f816dfe0f77b4159b5e2952051664356a579f690ccd58a626e0975708afcd7ad5919366c490944e3a9a5
1d4cbd2 test: Add unit test for LockDirectory (Wladimir J. van der Laan)
fc888bf util: Fix multiple use of LockDirectory (Wladimir J. van der Laan)
Pull request description:
Wrap the `boost::interprocess::file_lock` in a `std::unique_ptr` inside the map that keeps track of per-directory locks.
This fixes a build issue with the clang 4.0.0+boost-1.58.0p8 version combo on OpenBSD 6.2, and should have no effect otherwise.
Also add a unit test, make the function thread-safe, and fix Linux versus Windows behavior inconsistency.
Meant to fix#12413.
Tree-SHA512: 1a94c714c932524a51212c46e8951c129337d57b00fd3da5a347c6bcf6a947706cd440f39df935591b2079995136917f71ca7435fb356f6e8a128c509a62ec32
bb00c95 Consistently use FormatStateMessage in RPC error output (Ben Woosley)
8b8a1c4 Add test for 'mempool min fee not met' rpc error (Ben Woosley)
c04e0f6 Fix 'mempool min fee not met' debug output (Ben Woosley)
Pull request description:
Output the value that is tested, rather than the unmodified fee value.
Prompted by looking into: #11955
Tree-SHA512: fc0bad47d4af375d208f657a6ccbad6ef7f4e2989ae2ce1171226c22fa92847494a2c55cca687bd5a1548663ed3313569bcc31c00d53c0c193a1b865dd8a7657
This commit fixes problems with calling LockDirectory multiple times on
the same directory, or from multiple threads. It also fixes the build on
OpenBSD.
- Wrap the boost::interprocess::file_lock in a std::unique_ptr inside
the map that keeps track of per-directory locks. This fixes a build
issue with the clang 4.0.0+boost-1.58.0p8 version combo on OpenBSD
6.2, and should have no observable effect otherwise.
- Protect the locks map using a mutex.
- Make sure that only locks that are successfully acquired are inserted
in the map.
- Open the lock file for appending only if we know we don't have the
lock yet - The `FILE* file = fsbridge::fopen(pathLockFile, "a");`
wipes the 'we own this lock' administration, likely because it opens
a new fd for the locked file then closes it.
fa27623 qt: Initialize members in WalletModel (MarcoFalke)
Pull request description:
This prevents segfaults (or errors when running qt in valgrind)
```
Conditional jump or move depends on uninitialised value(s)
WalletModel::checkBalanceChanged() (walletmodel.cpp:156)
Tree-SHA512: 38c8c03c7fa947edb3f1c13eab2ac7a62ef8f8141603c2329a7dc5821a887a349af8014dc739b762e046f410f44a9c6653b6930f08b53496cf66381cadc06246
2e9406c Interrupt loading thread after shutdown request (João Barbosa)
Pull request description:
This change (currently) avoids loading the mempool if shutdown is requested.
Tree-SHA512: 3dca3a6ea5b09bd71db0974584d93dfe81819bc0bdbb4d9b6fa0474755306d1403f6c058ecb8211384493a8f7ca3a9134173db744b7344043cfc7d79286c8fd4
d6f3a73 Remove redundant locks (practicalswift)
Pull request description:
Remove redundant locks:
* ~~`FindNode(...)` is locking `cs_vNodes` internally~~
* `SetAddressBook(...)` is locking `cs_wallet` internally
* `DelAddressBook(...)` is locking `cs_wallet` internally
**Note to reviewers:** From what I can tell these locks are redundantly held from a data integrity perspective (guarding specific variables), and they do not appear to be needed from a data consistency perspective (ensuring a consistent state at the right points). Review thoroughly and please let me know if I'm mistaken :-)
Tree-SHA512: 7e3ca2d52fecb16385dc65051b5b20d81b502c0025d70b0c489eb3881866bdd57947a9c96931f7b213f5a8a76b6d2c7b084dff0ef2028a1e9ca9ccfd83e5b91e
6ef86c9 Do not un-mark fInMempool on wallet txn if ATMP fails. (Matt Corallo)
Pull request description:
Irrespective of the failure reason, un-marking fInMempool
out-of-order is incorrect - it should be unmarked when
TransactionRemovedFromMempool fires.
Clean up of #11839, which I think was the wrong fix.
Tree-SHA512: 580731297eeac4c4c99ec695e15b09febf62249237bc367fcd1830fc811d3166f9336e7aba7f2f6f8601960984ae22cebed781200db0f04e7cd2008db1a83f64
b7f6002ed5 Fix rescan test failure due to unset g_address_type, g_change_type (Russell Yanofsky)
Pull request description:
New global variables were introduced in #11403 and not setting them causes:
```
test_bitcoin: wallet/wallet.cpp:4259: CTxDestination GetDestinationForKey(const CPubKey&, OutputType): Assertion `false' failed.
unknown location(0): fatal error in "importwallet_rescan": signal: SIGABRT (application abort requested)
```
It's possible to reproduce the failure reliably by running:
```
src/test/test_bitcoin --log_level=test_suite --run_test=wallet_tests/importwallet_rescan
```
Failures happen nondeterministically because boost test framework doesn't run tests in a specified order, and tests that run previously can set the global variables and mask the bug.
This is similar to bug #12150. Example travis failure is https://travis-ci.org/bitcoin/bitcoin/jobs/340642010
Tree-SHA512: ab40662b3356892b726f1f552e22d58d86b5e982538741e52b37ee447a0c97c76c24ae543687edf2e25d9dd925722909d37abfae95d93bf09e23fa245a4c3351
New global variables were introduced in #11403 and not setting them causes:
test_bitcoin: wallet/wallet.cpp:4259: CTxDestination GetDestinationForKey(const CPubKey&, OutputType): Assertion `false' failed.
unknown location(0): fatal error in "importwallet_rescan": signal: SIGABRT (application abort requested)
It's possible to reproduce the failure reliably by running:
src/test/test_bitcoin --log_level=test_suite --run_test=wallet_tests/importwallet_rescan
Failures happen nondeterministically because boost test framework doesn't run
tests in a specified order, and tests that run previously can set the global
variables and mask the bug.
a71c56a clientversion: Use full commit hash for commit-based version descriptions (Luke Dashjr)
Pull request description:
git keeps changing the number of digits in abbreviated hashes, resulting in the GitHub archive hash changing because we include it here.
To workaround this and avoid hashes that become increasingly ambiguous later on, just include the full commit hash when building from git.
This has no effect on tagged releases.
(Cleanly mergable back to 0.10 without backport)
Tree-SHA512: b0be5391fadd16fbc9bbeffe1574a61c95931cbf6dea885d7e3cfcd3474b89e71767b1b55b4eeeeb66e4e119e78ff579cd9d206366d36928a209a31e1c1eed75
91986ed206 scripted-diff: Use UniValue.pushKV instead of push_back(Pair()) (Karel Bilek)
a570098021 Squashed 'src/univalue/' changes from 07947ff2da..51d3ab34ba (MarcoFalke)
Pull request description:
Rebased version of #11386 by karel-3d.
Closes: #11386
Tree-SHA512: f3a81447e573c17e75813f4d41ceb34b9980eac81efdd98ddb149d7c51f792be7e2b32239b6ea7e6da68af23897afa6b4ce3f4e8070f9c4adf5105bf6075f2a0
faca18dcf feebumper: Use PreconditionChecks to determine bump eligibility (MarcoFalke)
718f05cab move more bumpfee prechecks to feebumper::PreconditionChecks (Gregory Sanders)
Pull request description:
This only affects the gui.
Fee-bumping of transactions that are already confirmed or are already conflicted by other transactions should not be offered by the gui.
Tree-SHA512: 4acf8087c69fbe5bd67be0485cdb4055e985bbf84acc420aa786ad31e2dc6c2572baaac1d359af10a6907790f626edca690285d9a46ae5440900ea12624c634f
a25cb0f Use ptrdiff_t type to more precisely indicate usage and avoid compiler warnings. (murrayn)
Pull request description:
ptrdiff_t is a more strictly correct type, and gets rid of compiler warnings.
Tree-SHA512: 39718a5cdc10e698f14185f4622a9b439728bce619bd8b3a86f2b99ed5b056cf5a8545a3e5c4bc8a6a01b845fb73510036cee5e6d2629c58df26be692a957fba
004f999 boost: drop boost threads for [alert|block|wallet]notify (Cory Fields)
0827267 boost: drop boost threads from torcontrol (Cory Fields)
ba91724 boost: remove useless threadGroup parameter from Discover (Cory Fields)
f26866b boost: drop boost threads for upnp (Cory Fields)
Pull request description:
This doesn't completely get rid of boost::thread, but this batch should be easy to review, and leaves us with only threadGroup (scheduler + scriptcheck) remaining.
Note to reviewers: The upnp diff changes a bunch of whitespace, it's much more clear with 'git diff -w'
Tree-SHA512: 5a356798d0785f93ed143d1f0afafe890bc82f0d470bc969473da2d2aa78bcb9b096f7ba11b92564d546fb447d4bd0d347e7842994ea0170aafd53fda7e0a66e
c4af738 Fix ignoring tx data requests when fPauseSend is set on a peer (Matt Corallo)
Pull request description:
This resolves a bug introduced in
66aa1d58a1 where, if when responding
to a series of transaction requests in a getdata we hit the send
buffer limit and set fPauseSend, we will skip one transaction per
call to ProcessGetData.
Bug found by Cory Fields (@theuni).
Probably worth slipping into 0.16 :/.
Tree-SHA512: a9313cef8ac6da31eb099c9925c8401a638220cf7bc9b7b7b83151ecae4b02630f2db45ef6668302b9bb0f38571afbd764993427f1ec9e4d74d9a3be6647d299
a8b5d20 Reset pblocktree before deleting LevelDB file (Sjors Provoost)
Pull request description:
#11043 repaced:
```
delete pblocktree;
pblocktree = new CBlockTreeDB(nBlockTreeDBCache, false, fReset);
```
With:
```
pblocktree.reset(new CBlockTreeDB(nBlockTreeDBCache, false, fReset));
```
This is problematic because `new CBlockTreeDB` tries to delete the existing file, which will fail with `LOCK: already held by process` if it's still open. That's the case for QT.
When QT finds a problem with the index it will ask the user if they want to reindex. At that point it has already opened `blocks/index`. It then runs this [while loop](https://github.com/bitcoin/bitcoin/blob/v0.16.0rc3/src/init.cpp#L1415) again with `fReset = 1`, resulting in the above error.
This change makes that error go away, presumably because `reset()` without an argument closes the file.
Tree-SHA512: fde8b546912f6773ac64da8476673cc270b125aa2d909212391d1a2001b35c8260a8772126b99dfd76b39faaa286feb7c43239185fe584bd4dc2bc04a64044ce
1687cb4 Refactor: One CBaseChainParams should be enough (Jorge Timón)
Pull request description:
There's no need for class hierarchy with CBaseChainParams, it is just a struct with 2 fields.
This starts as a +10-43 diff
Tree-SHA512: 0a7dd64ab785416550b541787c6083540e4962d76b6cffa806bb3593aec2daf1752dfe65ac5cd51b34ad5c31dd8292c422b483fdd2d37d0b7e68725498ed4c2d
c8edc2c [docs] initial QT documentation, move Qt Creator instructions (Sjors Provoost)
Pull request description:
I'll update this as I figure out how everything is tied together, but I think it's a useful enough start.
Tree-SHA512: d96e5c9ba8ccc3a1b92a0894a8a8449317100eebb14e5d390b51793534458f50eac296cf2945fccf81b85aff23fa32d91d6015a0a76ada4f7091a400d7508ae5
This resolves a bug introduced in
66aa1d58a1 where, if when responding
to a series of transaction requests in a getdata we hit the send
buffer limit and set fPauseSend, we will skip one transaction per
call to ProcessGetData.
Bug found by Cory Fields (@theuni).
669c943 Avoid leaking prioritization information when relaying transactions (Suhas Daftuar)
e868b22 fee estimator: avoid sorting mempool on shutdown (Suhas Daftuar)
0975406 Correct mempool mapTx comment (Suhas Daftuar)
Pull request description:
Following up on #12127 and #12118, this cleans up a comment that was left incorrect in txmempool.h, and addresses a couple of the observations @TheBlueMatt made about an unnecessary use of `queryHashes()` and a small information leak when prioritizing transactions.
Left undone is nuking queryHashes altogether; that would require changing the behavior of the `getrawmempool` rpc call, which I think I might be in favor of doing, but wanted to save for its own PR.
Tree-SHA512: c97d10b96dcd6520459287a4a2eda92774173757695100fcfe61e526aef86f394507c331d17f9e0c14b496c33ec46198a0f165a847762ca50f7c6780b993f162
2f960b5 [wallet] Indent only change of CWallet::AvailableCoins (João Barbosa)
1beea7a [wallet] Make CWallet::ListCoins atomic (João Barbosa)
Pull request description:
Fix a potencial race in `CWallet::ListCoins`.
Replaces `cs_main` and `cs_wallet` locks by assertions in `CWallet::AvailableCoins`.
Tree-SHA512: 09109f44a08b4b53f7605d950ab506d3f748490ab9aed474aa200e93f7b0b9f96f9bf60abe1c5f658240fd13d9e3267c0dd43fd3c1695d82384198ce1da8109f
fa795cf wallet: Disallow abandon of conflicted txes (MarcoFalke)
Pull request description:
Abandon transactions that are already conflicted is a noop, so don't try and return false/throw instead.
Tree-SHA512: fd2af4149bd2323f7f31fe18685c763790b8589319b4e467b464ab456d5e8971501ab16d124e57a22693666b06ae433ac3e59f0fd6dfbd2be2c6cae8be5bcbd8
db1cbcc [RPC] Remove deprecated addmultisigaddress return format (John Newbery)
cb28a0b [RPC] Remove deprecated createmultisig object (John Newbery)
ed45c82 [tests] Remove test for deprecated createmultsig option (John Newbery)
d066a1c [rpc] Remove deprecated getmininginfo RPC option (John Newbery)
c6f09c2 [rpc] remove deprecated estimatefee RPC (John Newbery)
a8e437a [tests] Remove estimatefee from rpc_deprecated.py test (John Newbery)
a5623b1 [tests] Remove tests for deprecated estimatefee RPC (John Newbery)
d119f2e [tests] Fix style warnings in feature_fee_estimation.py (John Newbery)
Pull request description:
There were some RPC/RPC options deprecated in v0.16. Those can now be removed from master since v0.16 has been branched.
- `estimatefee` RPC has been removed. The `feature_fee_estimation.py` test has been updated to remove the RPC, but doesn't yet have good coverage of the replacement RPC `estimatesmartfee`. Improving the test coverage should be done in a new PR. (#11031)
- the `errors` field returned by `getmininginfo` has been deprecated and replaced by a `warning` field. (#10858)
- providing addresses as inputs to `createmultisig` has been deprecated. Users should use `addmultisigaddress` instead (#11415)
- The return format from `addmultisigaddress` has changed (#11415)
`getwitnessaddress` was also deprecated in v0.16 and can be removed, but many tests are using that RPC, so it's a larger job to remove. It should be removed in a separate PR (possibly after #11739 and #11398 have been merged and the segwit test code tidied up)
Tree-SHA512: 8ffaa5f6094131339b9e9e468e8b141de4b144697d2271efa2992b80b12eb97849ade3da8df5c1c9400ed4c04e6a029926550a3e5846d2029b644f9e84ac7124
5bdbbdc Refactor HaveKeys to early return on false result (João Barbosa)
Pull request description:
This consists in a trivial change where the return type of `HaveKeys()` is now `bool` meaning that it returns whether all keys are in the keystore, and early returns when one isn't.
Tree-SHA512: 03e35ea8486404b84884b49f6905c9f4fc161a3eeef080b06482d77985d5242a2bdd57a34b8d16abe19ee8c6cfa3e6fbcb935c73197d53f4cd468a2c7c0b889b
45eea40 Bech32 addresses in dumpwallet (fivepiece)
Pull request description:
Output bech32 addresses in dumpwallet if address type is not as legacy
Tree-SHA512: f6b6f788293779fe6339b94d9b792180e1d1dcb9c8e826caef8693557e1710213ba57891981c17505ace8d67b407eeca6fd9a8825757dd292cca2aa12575d15c
02fc886 Add braces to meet code style on line-after-the-one-changed. (Matt Corallo)
85aa839 Hold mempool.cs for the duration of ATMP. (Matt Corallo)
Pull request description:
This resolves an issue where getrawmempool() can race mempool
notification signals. Intuitively we use mempool.cs as a "read
lock" on the mempool with cs_main being the write lock, so holding
the read lock intermittently while doing write operations is
somewhat strange.
This also avoids the introduction of cs_main in getrawmempool()
which reviewers objected to in the previous fix in #12273
Tree-SHA512: 29464b9ca3890010ae13b7dc1c53487cc2bc9c3cf3d32a14cb09c8aa33848f57959d8991ea096beebcfb72f062e4e1962f104aefe4252c7db87633bbfe4ab317
11e0151 http: Remove numThreads and ThreadCounter (Wladimir J. van der Laan)
f946654 http: Remove WaitExit from WorkQueue (Wladimir J. van der Laan)
b1c2370 http: Join worker threads before deleting work queue (Wladimir J. van der Laan)
Pull request description:
This prevents a potential race condition if control flow ends up in
`ShutdownHTTPServer` before the thread gets to `queue->Run()`,
deleting the work queue while workers are still going to use it.
Meant to fix#12362.
Tree-SHA512: 8108514aeee5b2067a3736ed028014b580d1cbf8530ac7682b8a23070133dfa1ca21db4358c9158ea57e8811e0551395b6cb769887876b9cfce067ee968d0642
1e5d14b qt: Clarify some comments (Wladimir J. van der Laan)
f5a4c3d qt: Make sure splash screen is freed on AppInitMain fail (Wladimir J. van der Laan)
Pull request description:
The `splashFinished` event was never sent if AppInitMain fails, causing the splash screen to stick around, causing problems later.
This bug has existed for a while but is now trigging potential crashed because the splash screen subscribes to wallet events.
Meant to fix#12372.
Tree-SHA512: 192a7e3a528015e771d7860dd95fd7b772292fd8064abf2a3cf3a8ea0d375cd43a6e8ed37ca1a38962fe1410c934599e557adf6a8ef9d87ec7f61b6e5fd8db7e
2222bf0 qt: Poll ShutdownTimer after init is done (MarcoFalke)
Pull request description:
The shutdown process has started in `requestShutdown`, but initialize will happily continue with `initializeResult` and start threads late in the shutdown progess. Deleting this running thread will crash the application according to the qt docs:
e5033a5c9b/src/corelib/thread/qthread.cpp (L412-L415)
Potential fix for https://github.com/bitcoin/bitcoin/issues/12372#issuecomment-363642332
This reverts #11831 for now and hopefully restores the previous behaviour.
Tree-SHA512: 8e1706afe90ddf2d972aca12c12d4cb2a9a4f38646c59c5466fe5a1a67361896b93c43917d5ac283841ee2bcc62e6bb8dc2bc81dea9129c899b354e9a4ef241b
dd2de47 Fix fast-shutdown crash if genesis block was not loaded (Matt Corallo)
1c9394a Fix fast-shutdown hang on ThreadImport+GenesisWait (Matt Corallo)
Pull request description:
The second commit is a much simpler alternative fix for the issue fixed in #12349. To test I made ShutdownRequested() always StartShutdown() after a certain number of calls, which turned up one other hang, fixed in the first commit.
Tree-SHA512: 86bde6ac4b8b4e2cb99fff87dafeed02c0d9514acee6d94455637fb2da9ffc274b5ad31b0a6b9f5bd7b700ae35395f28ddb14ffc65ddda3619aa28df28a5607d
9ad6746ccd Use static_cast instead of C-style casts for non-fundamental types (practicalswift)
Pull request description:
A C-style cast is equivalent to try casting in the following order:
1. `const_cast(...)`
2. `static_cast(...)`
3. `const_cast(static_cast(...))`
4. `reinterpret_cast(...)`
5. `const_cast(reinterpret_cast(...))`
By using `static_cast<T>(...)` explicitly we avoid the possibility of an unintentional and dangerous `reinterpret_cast`. Furthermore `static_cast<T>(...)` allows for easier grepping of casts.
For a more thorough discussion, see ["ES.49: If you must use a cast, use a named cast"](https://isocpp.github.io/CppCoreGuidelines/CppCoreGuidelines#es49-if-you-must-use-a-cast-use-a-named-cast) in the C++ Core Guidelines (Stroustrup & Sutter).
Tree-SHA512: bd6349b7ea157da93a47b8cf238932af5dff84731374ccfd69b9f732fabdad1f9b1cdfca67497040f14eaa85346391404f4c0495e22c467f26ca883cd2de4d3c
The `splashFinished` event was never sent if AppInitMain fails,
causing the splash screen to stick around, causing problems
later.
This bug has existed for a while but is now trigging potential crashed
because the splash screen subscribes to wallet events.
Meant to fix#12372.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
The HTTP worker thread counter, as well as the RAII object that was used
to maintain it, is unused now, so can be removed.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
If the ShutdownRequested() check at the top of ActivateBestChain()
returns false during initial genesis block load we will fail an
assertion in UTXO DB flush as the best block hash IsNull(). To work
around this, we move the check until after one round of
ActivateBestChainStep(), ensuring the genesis block gets connected.
If the user somehow manages to get into ShutdownRequested before
ThreadImport gets to ActivateBestChain() we may hang waiting on
condvar_GenesisWait forever. A simple wait_for and
ShutdownRequested resolves this case.
This function, which waits for all threads to exit, is no longer needed
now that threads are joined instead.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
This prevents a potential race condition if control flow ends up in
`ShutdownHTTPServer` before the thread gets to `queue->Run()`,
deleting the work queue while workers are still going to use it.
Meant to fix#12362.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
This resolves an issue where getrawmempool() can race mempool
notification signals. Intuitively we use mempool.cs as a "read
lock" on the mempool with cs_main being the write lock, so holding
the read lock intermittently while doing write operations is
somewhat strange.
This also avoids the introduction of cs_main in getrawmempool()
which reviewers objected to in the previous fix in #12273
bdb3231 Implements a virtual destructor on the BaseRequestHandler class. (251)
Pull request description:
Granted that there is no undefined behavior in the current implementation, this PR implements a virtual destructor on the BaseRequestHandler class to protect against undefined behavior in the event that an object of a potential future derived BaseRequestHandler class with a destructor is destroyed through a pointer to this base class.
This PR also fixes "_warning: delete called on 'BaseRequestHandler' that is abstract but has non-virtual destructor [-Wdelete-non-virtual-dtor]_" warnings in environments where the project is built with the `-Wsystem-headers` flag; or environments where the `-Wdelete-non-virtual-dtor` diagnostics flag fires from system headers.
Tree-SHA512: 3c3b0797a8dbce8d8c5b244709e8bca41c4e28d5ba554a974bf7fc9128413e1098c457a00e51b21154ce6c11ce5da3071626e71d593b2550d0020bc589406eed
5460460 Add AbsPathForConfigVal to consolidate datadir prefixing for path args (James O'Beirne)
a1e1305 Clarify help messages for path args to mention datadir prefix (James O'Beirne)
Pull request description:
Change `-conf`'s help message to indicate that relative path values will be prefixed by the datadir path. This behavior probably merits clarification; it's kind of confusing when attempting to specify a configuration file in the current directory with `-conf=bitcoin.conf`, but instead loading the `bitcoin.conf` file in ~/.bitcoin datadir.
### Edit
This PR has been modified to document all cases where relative path configurations are modified to be under datadir. A small refactoring has also been added which consolidates this normalization.
Tree-SHA512: be4fc0595fbeba33d17af08f59898af45e76a44f00719ea0282403b155ac6755584604fab765250a3aa14ed6991882c4d1ccbe601184362c5ba97c886bdda344
d3a185a net: Move misbehaving logging to net logging category (Wladimir J. van der Laan)
Pull request description:
This moves the error messages for misbehavior (when available) into the line that reports the misbehavior, as well as moves the logging to the `net` category.
This is a continuation of #11583 and avoids serious-looking errors due to misbehaving peers. As it is impossible to correlate the `peer=X` numbers to specific incoming connections now without enabling the `net` category, it doesn't really help to see these messages by default.
To do this, Misbehaving() gains an optional `message` argument.
E.g. change:
2018-01-18 16:02:27 Misbehaving: x.x.x.x:62174 peer=164603 (80 -> 100) BAN THRESHOLD EXCEEDED
2018-01-18 16:02:27 ERROR: non-continuous headers sequence
to
2018-01-18 16:02:27 Misbehaving: x.x.x.x:62174 peer=164603 (80 -> 100) BAN THRESHOLD EXCEEDED: non-continuous headers sequence
When there is a category for "important" net messages (see #12219 ), we should move it there.
Tree-SHA512: 51c97e9a649bf5409f2fd4625fa1243a036e9c9de6037bb064244207408c2e0eb025e3af80866df673cdc006b8f35dc4078d074033f0d4c6a73bbb03949a269f
c887f87 Extend #11583 to include the most common message generated by non-contributing peers (port scanners?) 37% of the log default log entries for a node that has been up for ~24hrs was "version handshake timeout..." (Clem Taylor)
Pull request description:
37% of the default log entries for a node that has been up for ~24hrs was "version handshake timeout..."
Tree-SHA512: dceeee5d55a9ff7570174aeb63faac9beda239087220522adefef7ed11e0eeffa008ca28726011247c8834c1a222d37817baf895635ab874a95ebc435959070e
Change `-conf`'s and others' help messages to indicate that relative path
values will be prefixed by the datadir path. This behavior is confusing when
attempting to specify a configuration file in the current directory with
`-conf=bitcoin.conf`, but loading the `bitcoin.conf` file in ~/.bitcoin
datadir.
c409b1adac [rpc] Reduce scope of cs_main and cs_wallet locks in listtransactions (João Barbosa)
Pull request description:
Trivial change, no behaviour change.
Benchmark done as follow:
- run with `-regtest`
- wallet with 5000 transactions
- measured the time spent with the lock and the total time
- times are an average of 100 `listtransactions --count=...` calls
| `--count` | lock (ms) | total (ms) | saving |
|--:|--:|--:|--:|
| 10 | 0.2230 | 0.2510 | 11% |
| 100 | 2.5150 | 2.8690 | 12% |
| 1000 | 20.0320 | 23.3490 | 14% |
| 10000 | 105.2070 | 125.5310 | 16% |
Tree-SHA512: ebedfeeb4c8ad75c89128e53cae976a82967dbb5ffd129da0f7204ccf9c3c15070b3d509f3767bebd745512e410200cc546147c836e82409f95fc9b8d14fc3ed
d3e467520f Properly alphabetize output of CLI --help option. (murrayn)
Pull request description:
The --help output of bitcoind, bitcoin-cli, bitcoin-tx, qt/bitcoin-qt, et al. is only about 90% alphabetized by option, which is kind of sloppy and occasionally misleading. This change (mostly) organizes the output alphabetically.
Tree-SHA512: 3029900dbe99f03397c1cbdb5e4ac09a13bc99bafe73c6855097206e4cdd9ad70d0b5cedb5e1e520005c3e9ef1c4cd32bb9d8c98ce6918d8434fec8bf06e56c8
7444149 Document method for reviewers to verify chainTxData (John Newbery)
Pull request description:
This commit adds the final block hash of the window to getchaintxstats
and documents how reviewers can verify changes to chainTxData.
Tree-SHA512: d16abb5f47d058e52660f4d495f1e453205b1b83716d7c810ff62a70338db721386c1808ec1fc8468f514e4d80cc58e3c96eeb3184cbbcb1d07830fa5e53f342
660f5f1 net: don't retry failed oneshot connections forever (Cory Fields)
Pull request description:
As introduced by (my suggestion, sorry, in) #11512, failed dns resolves end up as oneshots. But failed oneshots are re-added as oneshots, so we need to make sure that we're not queuing these up forever after failed resolves.
Rather than trying to differentiate, I think we should just not re-add failed oneshots and be done with it.
Maybe @sipa can shed a light on what the original intention was.
Tree-SHA512: 2dfe35dabfb6354c315cf6f8ae42971765d36575e685662caae7ed8f9dea9472c6fb1fd5e62ec35301550b74b6613a54265e90fca2a6618544f78dacaac4d4fd
6558f8acc [gui] Defer coin control instancing (João Barbosa)
Pull request description:
Defer the GUI coin control instancing so that argument processing
is taken into account for the default coin control values.
Fixes#12312
Tree-SHA512: ecda28b94f4709319e9484b01afe763c7c3569097d2afb89db79da8a195c46d20ea77166df7edce0c8ab77627b295def01c072148714503436d27675d5e75d99
Pull 0.16 translations before forking, to avoid having to do it twice.
Tree-SHA512: 9c093885f03783e0f64718985c5f9d385d2a8592e2acc87d922ca973d07c756a6b7fff585388094f0e1b673c41e792ce918c1f594b45e82a262acd93e1b91a8e
082a61c Move scheduler/threadGroup into common-init instead of per-app (Matt Corallo)
Pull request description:
This resolves#12229 which pointed out a shutdown deadlock due to
scheduler/checkqueue having been shut down while network message
processing is still running.
Tree-SHA512: 0c0a76113996b164b0610d3b8c40b396f3e384d165bf098768e31fe3701b00763d0d810ef24702387e2e936fefb9fb900a6225f7417bb0175b585f365d542660
ee11121 Add special error for genesis coinbase to gettransaction (MeshCollider)
Pull request description:
Suggested by sipa here: https://botbot.me/freenode/bitcoin-core-dev/2018-01-23/?msg=96069825&page=2
Just adds a special error message for the genesis block coinbase transaction when using `getrawtransaction`
Tree-SHA512: cd102c7983ec5457b299bff4b6db747d339fda157933a3ac54aec26b1e48b115aa68c1c9e6cb7a916f15c7786273ab558b2b20ab9768544d211e0ae9d1480e34
c6b6385651 [rpc] Mention that HD is enabled if hdmasterkeyid is present (fanquake)
Pull request description:
Also adds optional flag.
Replaces #12042
Tree-SHA512: 6aded2cf36799f697eacbe4f51dff7c8110281092ca3c4fd73e26f57d788ec95a4fcbaf6976ef144e64f2e52759dbe241ac218a95e5ca2233cae1b98bfa5872e
6eddd43 Fix warnings when building with DEBUG_ADDRMAN (practicalswift)
Pull request description:
Fix warnings when building with `DEBUG_ADDRMAN`.
Warnings prior to this commit:
```
addrman.cpp:390:24: warning: comparison of integers of different signs: 'size_type' (aka 'unsigned long') and 'int' [-Wsign-compare]
if (vRandom.size() != nTried + nNew)
~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~
addrman.cpp:411:52: warning: comparison of integers of different signs: 'int' and 'size_type' (aka 'unsigned long') [-Wsign-compare]
if (info.nRandomPos < 0 || info.nRandomPos >= vRandom.size() || vRandom[info.nRandomPos] != n)
~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~
addrman.cpp:419:25: warning: comparison of integers of different signs: 'size_type' (aka 'unsigned long') and 'int' [-Wsign-compare]
if (setTried.size() != nTried)
~~~~~~~~~~~~~~~ ^ ~~~~~~
addrman.cpp:421:23: warning: comparison of integers of different signs: 'size_type' (aka 'unsigned long') and 'int' [-Wsign-compare]
if (mapNew.size() != nNew)
~~~~~~~~~~~~~ ^ ~~~~
4 warnings generated.
```
Tree-SHA512: 0316faecfe95066d2c9a0b6b3960086e43824f21a67086a895ea45fbce1327f8d6df5945fe923c2dbe4efce430bc1384d515d317c3930d97d24965e507cf734d
a73aab7 Use the character based overload for std::string::find. (Alin Rus)
Pull request description:
std::string::find has a character based overload as can be seen here
(4th oveload): http://www.cplusplus.com/reference/string/string/find/
Use that instead of constantly allocating temporary strings.
Tree-SHA512: dc7684b1551e6d779eb989e9a74363f9b978059a7c0f3db09d01744c7e6452961f9e671173265e71efff27afbcb80c0fe2c11b6dff2290e54a49193fa25a5679
30ded3e [Refactor] Remove unused fQuit var from checkqueue.h (donaloconnor)
Pull request description:
As per PR title, this var is no longer required
Tested by doing a successful compile.
Tree-SHA512: 845e5e0a250cb99e353e8584e9af2df44d97683174e8caa1069bd192b72ab622063765f29676272aecaef87596d72c63ae628404e2f42555136ec2c26d419f2d
34328b4 Use PACKAGE_NAME instead of hardcoding application name in log message (Wladimir J. van der Laan)
0c74e2e Log debug build status and warn when running benchmarks (Wladimir J. van der Laan)
Pull request description:
Log whether the starting instance of bitcoin core is a debug or release build (--enable-debug).
Also warn when running the benchmarks with a debug build, to prevent mistakes comparing debug to non-debug results.
Tree-SHA512: f612dcb7d0a8435016cff0df8aef4942144dfb88be8a00df45cc8830d2aba4b167f6d397b83f8f57d57685888babd04ba88d4dac5a202d3dbd91bcbea3708ef0
bde8bcd Update defaultAssumeValid according to release-process.md. (Gregory Maxwell)
Pull request description:
Update defaultAssumeValid according to release-process.md.
Updated for block 506067 (0000000000000000005214481d2d96f898e3d5416e43359c145944a909d242e0).
Tree-SHA512: 38e6440a11609e56df816e295ceff697d29830a1d85009f920250320c474f8b04a182635b2f1ab44f54d0cdb8b4e4378336a788400e513d7482514434e53b3ff
1e90544 net: Update hardcoded seeds (Wladimir J. van der Laan)
55f52bd contrib: Update ATTERN_AGENT to include 0.15.x (Wladimir J. van der Laan)
Pull request description:
Update the hardcoded node addresses, after changing the pattern to include 0.15.x.
Tree-SHA512: 58b997393d77dcee3dcaffba0c6f185ca46c24d766b33d3a8c9d9efe5dd2e01f086b894a23e185120eee5054697e409b64736e53ca8e42b2315f82355c5f5d5c
This resolves#12229 which pointed out a shutdown deadlock due to
scheduler/checkqueue having been shut down while network message
processing is still running.
ba490d2460 qt: Bump BLOCK_CHAIN_SIZE to 200GB (Wladimir J. van der Laan)
Pull request description:
Part of the release process for 0.16.
Value is open for discussion, my blocks/ directory is 163GB but this leaves some slack.
Tree-SHA512: 4dff81740992bf9de90427934afeb223ea5216f5682c9f07cb5c47aea33980a4c682fe3fd43c3dfa2c4d66ad0e7434dbce6cb252e56d63b36df605e12af9b10a
16f6f59dc [qa] Test fundrawtransaction with change_type option (João Barbosa)
536ddeb17 [rpc] Add change_type option to fundrawtransaction (João Barbosa)
31dbd5af4 [wallet] Add change type to CCoinControl (João Barbosa)
Pull request description:
Adds a new option `change_type` to `fundrawtransaction` RPC. This is useful to override the node `-changetype` argument.
The new option is exclusive to `changeAddress` option, setting both raises a RPC error.
See also #11403, #12119.
Tree-SHA512: 654686444f6125e37015a62f167064d54ec335701534988447be4687fa5ef9c7980a8a07cc0a03fff6ea6c4c1abf0f77a8843d535c4f3fe0bf93f968a4e676e6
f523c6bec [qa] Use address type in addmultisigaddress to avoid addwitnessaddress (João Barbosa)
886a92f25 [rpc] Add address type option to addmultisigaddress (João Barbosa)
Pull request description:
Adds the option `address_type` to `addmultisigaddress` and `createmultisg` RPC. This also allows to avoid `addwitnessaddress` to obtain an `p2sh-segwit` or `bech32` multsig address.
Related to #12210 as this reduces `addwitnessaddress` usage.
Tree-SHA512: 8f8f85dfcff66bb6c7e1e9865e37c285dead1d6dadb9672a89b92fa209d03cc35817ca1d656588c6c2146b728daaf7540b851929b640294653c62836cbefe7ee
04ededf Make CKey::Load references const (Russell Yanofsky)
Pull request description:
No change in behavior, this just prevents CKey::Load arguments from looking
like outputs.
Tree-SHA512: 6d93bce109318e88ddd5c21ad626571344707ae0e6d46e898c76fd95a7afd1c32202a6b3dfab47d6a787c84dfcbb35343cdec898bcf8f668574aa224f2eed977
596c446 [wallet] use P2WPKH change output if any destination is P2WPKH or P2WSH (Sjors Provoost)
Pull request description:
If `-changetype` is not explicitly set, then regardless of `-addresstype`, the wallet will use a ~`bech32` change address~ `P2WPKH` change output if any destination is `P2WPKH` or `P2WSH`.
This seems more intuitive to me and more in line with the spirit of [BIP-69](https://github.com/bitcoin/bips/blob/master/bip-0069.mediawiki).
When combined with #11991 a QT user could opt to use `bech32` exclusively without having to figure out how to launch with `-changetype=bech32`, although so would #11937.
Tree-SHA512: 9238d3ccd1f3be8dfdd43444ccf45d6bdc6584ced3172a3045f3ecfec4a7cc8999db0cdb76ae49236492a84e6dbf3a1fdf18544d3eaf6d518e1f8bd241db33e7
1df206f Disallow using addresses in createmultisig (Andrew Chow)
Pull request description:
This PR should be the last part of #7965.
This PR makes createmultisig only accept public keys and marks the old functionality of accepting addresses as deprecated.
It also splits `_createmultisig_redeemscript` into two functions, `_createmultisig_getpubkeys` and `_createmultisig_getaddr_pubkeys`. `_createmultisig_getpubkeys` retrieves public keys from the RPC parameters and `_createmultisig_getaddr_pubkeys` retrieves addresses' public keys from the wallet. `_createmultisig_getaddr_pubkeys` requires the wallet and is only used by `addwitnessaddress` (except when `createmultisig` is used in deprecated mode).
`addwitnessaddress`'s API is also changed. Instead of returning just an address, it now returns the same thing as `createmultisig`: a JSON object with two fields, address and redeemscript.
Tree-SHA512: a5796e41935ad5e47d8165ff996a8b20d5112b5fc1a06a6d3c7f5513c13e7628a4fd37ec30fde05d8b15abfed51bc250710140f6834b13f64d0a0e47a3817969
2b839ab Update chainparams comment for more info on service bits per dnsseed (Matt Corallo)
62e7642 Fall back to oneshot for DNS Seeds which don't support filtering. (Matt Corallo)
51ae766 Use GetDesireableServiceFlags in static seeds, document this. (Matt Corallo)
fb6f6b1 bluematt's testnet-seed now supports x9 (and is just a static list) (Matt Corallo)
Pull request description:
4440710 broke inserting entries into addrman from dnsseeds which
did not support service bits, as well as static seeds. Static seeds
were already being filtered by UA for 0.13.1+ (ie NODE_WITNESS), so
simply changing the default service bits to include NODE_WITNESS
(and updating docs appropriately) is sufficient. For DNS Seeds, not
supporting NODE_WITNESS is no longer useful, so instead use
non-filtering seeds as oneshot hosts irrespective of named proxy.
I've set my testnet-seed to also support x9, though because it is simply a static host, it may be useful to leave the support off so that it is used as a oneshot to get addresses from a live node instead. I'm fine with either.
Tree-SHA512: 3f17d4d2b0b84d876981c962d2b44cb0c8f95f52c56a48c6b35fd882f6d7a40805f320ec452985a1c0b34aebddb1922709156c3ceccd1b9f8363fd7cb537d21d
7f81250 Mention that other RPC calls report keys as "imported" while txns are still missing (Jonas Schnelli)
ccd8ef6 Reduce cs_main lock in ReadBlockFromDisk, only read GetBlockPos under the lock (Jonas Schnelli)
bc356b4 Make sure WalletRescanReserver has successfully reserved the rescan (Jonas Schnelli)
dbf8556 Add RAII wallet rescan reserver (Jonas Schnelli)
8d0b610 Avoid pemanent cs_main/cs_wallet lock during wallet rescans (Jonas Schnelli)
Pull request description:
Right now, we are holding `cs_main`/`cs_wallet` during the whole rescan process (which can take a couple of hours).
This was probably only done because of laziness and it is an important show-stopper for #11200 (GUI rescan abort).
Tree-SHA512: 0fc3f82d0ee9b2f013e6bacba8d59f7334306660cd676cd64c47bb305c4cb7c7a36219d6a6f76023b74e5fe87f3ab9fc7fd2439e939f71aef653fddb0a1e23b1
This moves the error messages for misbehavior (when available) into the
line that reports the misbehavior, as well as moves the logging to the
`net` category.
This is a continuation of #11583 and avoids serious-looking errors due
to misbehaving peers.
To do this, Misbehaving() gains an optional `message` argument.
E.g. change:
2018-01-18 16:02:27 Misbehaving: x.x.x.x:62174 peer=164603 (80 -> 100) BAN THRESHOLD EXCEEDED
2018-01-18 16:02:27 ERROR: non-continuous headers sequence
to
2018-01-18 16:02:27 Misbehaving: x.x.x.x:62174 peer=164603 (80 -> 100) BAN THRESHOLD EXCEEDED: non-continuous headers sequence
This allows us to not have to update the chainparams whenever a
DNS Seed changes its filtering support, as well fixes a bug
introduced in 44407100f where returned nodes will never be
attempted.
44407100f broke inserting entries into addrman from static seeds
(as well as dnsseeds which did not support service bits). Static
seeds were already being filtered by UA for 0.13.1+ (ie
NODE_WITNESS), so simply changing the default service bits to
include NODE_WITNESS (and updating docs appropriately) is
sufficient.
For DNS Seeds, we will later fix by falling back to oneshot if a
seed does not support filtering.
Also warn if bitcoind is configured to use a relative -datadir path.
Specifying paths relative to the current working directory in a daemon process
can be dangerous, because files can fail to be located even if the
configuration doesn't change, but the daemon is started up differently.
Specifying a relative -datadir now adds a warning to the debug log. It would
not be backwards-compatible to forbid relative -datadir paths entirely, and it
could also be also inconvenient for command line testing.
Specifying a relative -walletdir now results in a startup error. But since the
-walletdir option is new in 0.16.0, there should be no compatibility issues.
Another reason not to use working directory paths for -walletdir specifically
is that the default -walletdir is a "wallets" subdirectory inside the datadir,
so it could be surprising that setting -walletdir manually would choose a
directory rooted in a completely different location.
cc90a4f46 Avoid potential null dereference in ReceiveCoinsDialog constructor (Russell Yanofsky)
Pull request description:
Not a bug in practice because current `WalletModel::getDefaultAddressType()` implementation does not dereference its `this` pointer.
Encountered issue while rebasing #10244 after #11991 was merged.
Tree-SHA512: d76afc410d4a436ec62936196fdac1af89c221d8c0d6e73349024afe55bbf8820f843177a8fe8210aa8021d45a17a0ecd9b6f693381e3edb234d9897cece29d7
fa1e69e qa: Sync with validationinterface queue in sync_mempools (MarcoFalke)
Pull request description:
Commit e545dedf72 moved `TransactionAddedToMempool` to the background scheduler thread. Thus, adding a transaction to the mempool will no longer add it to the wallet immediately. Functional tests, that `sync_mempools` and then call into wallet rpcs will race against the scheduler thread.
Fix that race by flushing the scheduler queue.
Fixes#12205; Fixes#12171;
References #9584;
Tree-SHA512: 14d99cff9c4756de9fad412f04e6d8e25bb9a0938f24ed8348de79df5b4ee67763dac5214b1a69e77e60787d81ee642976d1482b1b5637edfc4892a238ed22af
134cdc7 Test walletpassphrase timeout bounds and clamping (Andrew Chow)
0b63e3c Clamp walletpassphrase timeout to 2^(30) seconds and check its bounds (Andrew Chow)
Pull request description:
Fixes#12100
Makes the timeout be clamped to 2^30 seconds to avoid the issue with sign flipping with large timeout values and thus relocking the wallet instantly. Unlocking for at most ~34 years should be sufficient.
Also checks that the timeout is not negative to avoid instant relocks.
Tree-SHA512: 426922f08c54e323d259e25dcdbebc2cd560708a65111ce6051493a7e7c61e79d9da1ea4026cc0d68807d728f5d7c0d7c58168c6ef4167b94cf6c2877af88794
49e5f3f rpc: Add deprecation error for `getinfo` (Wladimir J. van der Laan)
Pull request description:
Add a short informative deprecation message when users use `getinfo`, that points them to the new calls
here to get the different information fields.
This is meant to be temporary, for one release only.
Tree-SHA512: 4fccd8853762d0740d051d9e74cdea5ad6f8d5c0ba67d69e8dd2ac8a1538d8270c1a1fab755d9f052ff3b3677753b09138c8c5ca0bc92d156de90413cd5c1814
63ac8907c [qt] receive tab: bech32 address opt-in checkbox (Sjors Provoost)
Pull request description:
<img width="647" alt="schermafbeelding 2018-01-12 om 18 34 48" src="https://user-images.githubusercontent.com/10217/34887691-a6a796fe-f7c7-11e7-8b89-87ce07c61ce3.png">
Checkbox does what you would expect. Press tab from the amount field to get there.
It's unchecked by default.
When launched with `-addresstype=bech32` it's checked by default. When launched with `-addresstype=legacy` it unchecked and disabled.
The change in `receivecoinsdialog.ui` is smaller than it looks, due to the way git handles XML diffs. I had to add a horizontal spacer to make it look decent, see https://github.com/bitcoin/bitcoin/issues/11950#issuecomment-352870909. This causes column numbers to change in the rest of the grid.
I recommend testing on at least one other OS than OSX to be on the safe side.
Tree-SHA512: ec4b733b796d9a94278a5d8040a69d9574ef50021e68f94f61f2da75d1bb57f39272cbc9f1f7d34f733a19640daf666a23844fcd132f83bfdaf327d9d1d6f105
5f911c5cc2 trivial: fix address_type help text of getnewaddress and getrawchangeaddress (mruddy)
Pull request description:
"p2sh" in the help messages should have been "p2sh-segwit".
The messages before this patch:
`help getnewaddress`
"address_type" (string, optional) The address type to use. Options are "legacy", "**p2sh**", and "bech32". Default is set by -addresstype.
`help getrawchangeaddress`
"address_type" (string, optional) The address type to use. Options are "legacy", "**p2sh**", and "bech32". Default is set by -changetype.
Tree-SHA512: 6dfc0bebe577995f5521b83a12854045ac3eda4e65c9b92fc581da4ee68ab1218e05af82f2154bb2640a0813c5f79e010cd9e5ada449494c8831b3757bda854c
Log whether the starting instance of bitcoin core is a debug or release
build (--enable-debug).
Also warn when running the benchmarks with a debug build, to prevent
mistakes comparing debug to non-debug results.
0a22a52 Use mempool's ancestor sort in transaction selection (Suhas Daftuar)
7abfa53 Add test for new ancestor feerate sort behavior (Suhas Daftuar)
9a51319 Sort mempool by min(feerate, ancestor_feerate) (Suhas Daftuar)
6773f92 Refactor CompareTxMemPoolEntryByDescendantScore (Suhas Daftuar)
Pull request description:
This more closely approximates the desirability of a given transaction for
mining, and should result in less re-sorting when transactions get removed from
the mempool after being mined.
I measured this as approximately a 5% speedup in removeForBlock.
Tree-SHA512: ffa36b567c5dfe3e8908c545a459b6a5ec0de26e7dc81b1050dd235cac9046564b4409a3f8c5ba97bd8b30526e8fec8f78480a912e317979467f32305c3dd37b
8e617e3 Remove unused mempool index (Suhas Daftuar)
Pull request description:
We haven't used the "mining_score" index since 0.12, so remove it.
Tree-SHA512: ae37b8663194986eaeecfc2bbeca7ecb4ae6f0d8384515fa218cbc939a580d4b9f7f997c5297c3f1b3c3a0651edb092f373ac9a4808aaec30d38cb99d5f3ed70
Transaction selection for mining tracks ancestor feerates that are
modified based on transactions that have already been selected. This
commit de-duplicates the code so that the ancestor feerate sorting used
by the mempool can also be directly applied to the miner.
Clamps the timeout of walletpassphrase to 2^(30) seconds, which is
~34 years. Any number greater than that will be forced to be
2^(30). This avoids the sign flipping problem with large values which
can result in a negative time used.
Also perform bounds checks to ensure that the timeout is positive
to avoid immediate relocking of the wallet.
Make createmultisig only accept public keys with the old functionality
marked as deprecated.
Splits _createmultisig_redeemscript into two functions, one for
getting public keys from UniValue and one for getting addresses
from UniValue and then their respective public keys. The one for
retrieving address's public keys is located in rpcwallet.cpp
Changes addwitnessaddress's output to be a JSON object with
two fields, address and redeemscript.
Adds a test to deprecated_rpc.py for testing the deprecation.
Update the tests to use addwitnessaddress or give only public keys
to createmultisig. Anything that used addwitnessaddress was also
updated to reflect the new API.
18be3ab139 Adding test case for SINGLE|ANYONECANPAY hash type in tx_valid.json (Chris Stewart)
Pull request description:
We are missing a test vector for SINGLE|ANYONECANPAY inside of tx_valid.json. This addresses the issue #12060
Tree-SHA512: e3526113477dbf575c4a844cf489dcfa2c037c6d928af6f97413edc1a8d29cdf2143da96471cdfd3de08bf5ed178117ed67926fd70fd42ca391ac0bb0d08f3fd
New global variables were introduced in #11403 and not setting them causes:
test_bitcoin: wallet/wallet.cpp:4199: CTxDestination GetDestinationForKey(const CPubKey&, OutputType): Assertion `false' failed.
unknown location(0): fatal error in "ListCoins": signal: SIGABRT (application abort requested)
It's possible to reproduce the failure reliably by running:
src/test/test_bitcoin --log_level=test_suite --run_test=wallet_tests/ListCoins
Failures happen nondeterministically because boost test framework doesn't run
tests in a specified order, and tests that run previously can set the global
variables and mask the bug.
b224a47a1 Add address_types test (Pieter Wuille)
7ee54fd7c Support downgrading after recovered keypool witness keys (Pieter Wuille)
940a21932 SegWit wallet support (Pieter Wuille)
f37c64e47 Implicitly know about P2WPKH redeemscripts (Pieter Wuille)
57273f2b3 [test] Serialize CTransaction with witness by default (Pieter Wuille)
cf2c0b6f5 Support P2WPKH and P2SH-P2WPKH in dumpprivkey (Pieter Wuille)
37c03d3e0 Support P2WPKH addresses in create/addmultisig (Pieter Wuille)
3eaa003c8 Extend validateaddress information for P2SH-embedded witness (Pieter Wuille)
30a27dc5b Expose method to find key for a single-key destination (Pieter Wuille)
985c79552 Improve witness destination types and use them more (Pieter Wuille)
cbe197470 [refactor] GetAccount{PubKey,Address} -> GetAccountDestination (Pieter Wuille)
0c8ea6380 Abstract out IsSolvable from Witnessifier (Pieter Wuille)
Pull request description:
This implements a minimum viable implementation of SegWit wallet support, based on top of #11389, and includes part of the functionality from #11089.
Two new configuration options are added:
* `-addresstype`, with options `legacy`, `p2sh`, and `bech32`. It controls what kind of addresses are produced by `getnewaddress`, `getaccountaddress`, and `createmultisigaddress`.
* `-changetype`, with the same options, and by default equal to `-addresstype`, that controls what kind of change is used.
All wallet private and public keys can be used for any type of address. Support for address types dependent on different derivation paths will need a major overhaul of how our internal detection of outputs work. I expect that that will happen for a next major version.
The above also applies to imported keys, as having a distinction there but not for normal operations is a disaster for testing, and probably for comprehension of users. This has some ugly effects, like needing to associate the provided label to `importprivkey` with each style address for the corresponding key.
To deal with witness outputs requiring a corresponding redeemscript in wallet, three approaches are used:
* All SegWit addresses created through `getnewaddress` or multisig RPCs explicitly get their redeemscripts added to the wallet file. This means that downgrading after creating a witness address will work, as long as the wallet file is up to date.
* All SegWit keys in the wallet get an _implicit_ redeemscript added, without it being written to the file. This means recovery of an old backup will work, as long as you use new software.
* All keypool keys that are seen used in transactions explicitly get their redeemscripts added to the wallet files. This means that downgrading after recovering from a backup that includes a witness address will work.
These approaches correspond to solutions 3a, 1a, and 5a respectively from https://gist.github.com/sipa/125cfa1615946d0c3f3eec2ad7f250a2. As argued there, there is no full solution for dealing with the case where you both downgrade and restore a backup, so that's also not implemented.
`dumpwallet`, `importwallet`, `importmulti`, `signmessage` and `verifymessage` don't work with SegWit addresses yet. They're remaining TODOs, for this PR or a follow-up. Because of that, several tests unexpectedly run with `-addresstype=legacy` for now.
Tree-SHA512: d425dbe517c0422061ab8dacdc3a6ae47da071450932ed992c79559d922dff7b2574a31a8c94feccd3761c1dffb6422c50055e6dca8e3cf94a169bc95e39e959
This introduces two command line flags (-addresstype and -changetype) which control
the type of addresses/outputs created by the GUI and RPCs. Certain RPCs allow
overriding these (`getnewaddress` and `getrawchangeaddress`). Supported types
are "legacy" (P2PKH and P2SH-multisig), "p2sh-segwit" (P2SH-P2WPKH and P2SH-P2WSH-multisig),
and "bech32" (P2WPKH and P2WSH-multisig).
A few utility functions are added to the wallet to construct different address type
and to add the necessary entries to the wallet file to be compatible with earlier
versions (see `CWallet::LearnRelatedScripts`, `GetDestinationForKey`,
`GetAllDestinationsForKey`, `CWallet::AddAndGetDestinationForScript`).
73041c3c99 RPC Docs: addmultisigaddress is intended for non-watchonly addresses (Gregory Sanders)
Pull request description:
Spent a couple hours debugging why my p2sh watchonly funds were not appearing in various accounting calls when address was imported via `addmultisigaddress`.
Tree-SHA512: 0673e276e5ca8cdc4c9357bd835a29bd5a994520a78179600944932c700917142930288bf179f5e89b0874beaf1a88bd70129f3a297a46df42a10bab847017bb
c99a3c32c8 [tests] util_tests.cpp: actually check ignored args (Anthony Towns)
Pull request description:
An array with 7 elements was setup for checking argument parsing, but
was passed to ParseParamaeters with argc=5, meaning the interpretation
of the last two arguments was never actually checked.
Tree-SHA512: 7b81fde49742e524f1bb67e2ec084f5909ae36125f237f0210df4587c62e5a5a8f277f13543f0a85ad145c4bb80d62339a7d50d7ed41659df318c8198ea7f428
aad3090 [rpc] Adding ::minRelayTxFee amount to getmempoolinfo and updating mempoolminfee help description (Jeff Rade)
Pull request description:
These are RPC document changes from #11475 which is now merged. Took into consideration comments from #11475 and #6941 for this PR.
Biggest change here is when calling `getmempoolinfo`, will now show the `minrelaytxfee` in the JSON reponse (see below):
```
$ bitcoin-cli getmempoolinfo
{
"size": 50,
"bytes": 13102,
"usage": 70480,
"maxmempool": 300000000,
"mempoolminfee": 0.00001000,
"minrelaytxfee": 0.00001000
}
```
Fixes#8953
Tree-SHA512: 5ca583961365ee1cfe6e0d19afb0b41d542e179efee3b3c5f3fcf7d3ebca9cc3eedfd1434a0da40c5eed84fba98b35646fda201e6e61c689b58bee9cbea44b9e
ebcee1de2 bips: add bip176 (Bits Denomination) (William Casarin)
275b2eeed [qt] change µBTC to bits (William Casarin)
Pull request description:
Now that we have bip176, change "µBTC" to the more colloquial "bits"
Tree-SHA512: eba5e5f89c392728a4f0a3bd81a9779a117b8d72a490390fd031d4e7cc56c2bfee0016aba7ef9535903e8cf2262ce46497283424e378906d0e3bf5b0d2d981c7
6dda059bd [qt] Simplifies boolean expression model && model->haveWatchOnly() (251)
Pull request description:
This PR optimizes the boolean expression `model && model->haveWatchOnly()` to `model->haveWatchOnly()`.
The boolean expression can be optimized because the method `TransactionView::exportClicked` already guards against a potential dereferenced null pointer by returning early if `model` is null.
63a4dc1087/src/qt/transactionview.cpp (L351-L353)
Tree-SHA512: 8bdd0d05bf879745fa39d3ca7524471720ae08ceee9427d5a08776e7b56d18542ae87a6991cd6779e232305f504fdfc77223702b72ecbe231f5f5e98453456dd
An array with 7 elements was setup for checking argument parsing, but
was passed to ParseParamaeters with argc=5, meaning the interpretation
of the last two arguments was never actually checked.
This adds new fields 'pubkeys' and 'embedded' to the RPC's output, and improves the
documentation for previously added 'witness_version' and 'witness_program' fields.
595a7ba Increment MIT Licence copyright header year on files modified in 2017 (Akira Takizawa)
Pull request description:
Edited via:
$ contrib/devtools/copyright_header.py update .
ps) It is the same commit as #9450
Tree-SHA512: 274bfcd6cf2914315ed52f6db773a68800ce9d6bd225a3142654483f0bbc3fd865009e62f9d954f65765d038c626e55d2a64e37e16843809adc2f67abe659b6d
The boolean expression model && model->haveWatchOnly() can be simplified to model->haveWatchOnly(), because if (!model || !model->getOptionsModel()) { return; } guards against a potential dereferenced null pointer.
Implements a virtual destructor on the BaseRequestHandler class to protect against undefined behavior in
the event that a derived BaseRequestHandler class has a destructor and an object of such derived class
is destroyed through a pointer to its base class.
This replaces the first-fit algorithm used in the Arena with a best-fit. According to "Dynamic Storage Allocation: A Survey and Critical Review", Wilson et. al. 1995, http://www.scs.stanford.edu/14wi-cs140/sched/readings/wilson.pdf, both startegies work well in practice.
The advantage of using best-fit is that we can switch the slow O(n) algorithm to O(log(n)) operations. Additionally, some previously O(log(n)) operations are now replaced with O(1) operations by using a hash map. The end effect is that the benchmark runs about 2.5 times faster on my machine:
old: BenchLockedPool, 5, 530, 5.25749, 0.00196938, 0.00199755, 0.00198172
new: BenchLockedPool, 5, 1300, 5.11313, 0.000781493, 0.000793314, 0.00078606
I've run all unit tests and benchmarks.
97d2b09c12 Add helper to wait for validation interface queue to catch up (Matt Corallo)
36137497f1 Block ActivateBestChain to empty validationinterface queue (Matt Corallo)
5a933cefcc Add an interface to get the queue depth out of CValidationInterface (Matt Corallo)
a99b76f269 Require no cs_main lock for ProcessNewBlock/ActivateBestChain (Matt Corallo)
a734896038 Avoid cs_main in net_processing ActivateBestChain calls (Matt Corallo)
66aa1d58a1 Refactor ProcessGetData in anticipation of avoiding cs_main for ABC (Matt Corallo)
818075adac Create new mutex for orphans, no cs_main in PLV::BlockConnected (Matt Corallo)
Pull request description:
This should fix#11822.
It ended up bigger than I hoped for, but its not too gnarly. Note that "
Require no cs_main lock for ProcessNewBlock/ActivateBestChain" is mostly pure code-movement.
Tree-SHA512: 1127688545926f6099449dca6a4e6609eefc3abbd72f1c66e03d32bd8c7b31e82097d8307822cfd1dec0321703579cfdd82069cab6e17b1024e75eac694122cb
* Now that we have bip176, change "µBTC" to the more colloquial "bits"
* We retain the `µBTC (bits)` description in dropdowns and status bars.
The more concise "bits" is used when appended to numbers.
Signed-off-by: William Casarin <jb55@jb55.com>
This requires the removal of some very liberal (incorrect) cs_mains
sprinkled in some tests. It adds some chainActive.Tip() races, but
the tests are all single-threaded anyway.
760af84 Removed CCheckQueueSpeed benchmark (Martin Ankerl)
00721e6 Improved microbenchmarking with multiple features. (Martin Ankerl)
Pull request description:
The benchmark's KeepRunning() used to make a function call for each call, inflating measurement times for short running code. This change inlines the critical code that is executed each run and moves the slow timer updates into a new function.
This change increases the average runtime for Trig from 0.000000082339208 sec to 0.000000080948591.
Tree-SHA512: 36b3bc55fc9b1d4cbf526b7103af6af18e9783e6b8f3ad3adbd09fac0bf9401cfefad58fd1e6fa2615d3c4e677998f912f3323d61d7b00b1c660d581c257d577
3e1ee31 [Tests] Adding unit tests for GetDifficulty in blockchain.cpp. (sean)
Pull request description:
blockchain.cpp has low unit test coverage. This commit is intended
to start improving its code coverage to reasonable levels. One or more
follow up commits will complete the task that this commit is starting
(though the usefulness of this commit is not dependent upon later
commits).
Note that these tests were not written based upon a specification of how
GetDifficulty *should* work, but rather how it actually *does* work. As
a result, if there are any bugs in the current GetDifficulty
implementation, these unit tests serve to lock them in rather than
expose them.
-- Why has blockchain.cpp been modified if this is a unit testing change?
Since the existing GetDifficulty function relies on a global variable,
chainActive, it was not suitable for unit testing purposes. Both the
existing GetDifficulty function and the unit tests now call through to
a new, more modular version of GetDifficulty that can work on any chain,
not just chainActive.
-- Why does blockchain_tests.cpp directly include blockchain.cpp instead
of blockchain.h?
While the new GetDifficulty function's signature is arguably better than
the old one's, it still isn't great, and doesn't seem to warrant inclusion
as part of the blockchain.h API, especially since only test code is
directly using it. If a better way of exposing the new GetDifficulty
function to unit tests exists, please mention it and the commit will be
updated accordingly.
-- Why is the test fixture named blockchain_difficulty_tests rather than
blockchain_tests?
The Bitcoin Core policy for naming unit test files is to match the the
file under test ("blockchain" becomes "blockchain_tests"). While this
commit complies with that, blockchain.cpp is a massive file, such that
having all of the unit tests in one file will tend towards disorder.
Since there will be a lot more tests added to this file, the intention
is to divide up different types of tests into different test fixtures
within the same file.
Tree-SHA512: a7dda9c2a9414d4819b4d2911f5637891dc19cecbecfc1463846161d2a78793151927a5ab911c69a5d3013f7668e75a1d78a65667cb9d83910cda439cbe84d62
* inline performance critical code
* Average runtime is specified and used to calculate iterations.
* Console: show median of multiple runs
* plot: show box plot
* filter benchmarks
* specify scaling factor
* ignore src/test and src/bench in command line check script
* number of iterations instead of time
* Replaced runtime in BENCHMARK makro number of iterations.
* Added -? to bench_bitcoin
* Benchmark plotly.js URL, width, height can be customized
* Fixed incorrect precision warning
GUI wallet uses RBF by default, regardless of -walletrbf.
RPC and debug console in the GUI remain unchanged; they don't
use RBF by default, unless launched with -walletrbf=1.
656fde5 Add script birthtime metadata to dump and import wallet (MeshCollider)
1bab9b2 Add script dump note to RPC help text and release notes (MeshCollider)
68c1e00 Add test for importwallet (MeshCollider)
9e1184d Add dumpwallet scripts test (MeshCollider)
ef0c730 Add scripts to importwallet RPC (MeshCollider)
b702ae8 Add CScripts to dumpwallet RPC (MeshCollider)
cdc260a Add GetCScripts to CBasicKeyStore (MeshCollider)
Pull request description:
As discussed in https://github.com/bitcoin/bitcoin/pull/11289#issuecomment-334600457, adds the CScripts from the wallet to the `dumpwallet` RPC and then allows them to be imported with the `importwallet` RPC. Includes a basic test, and modifies the helptext of the dumpwallet RPC.
Notes:
- Reviewers: use `?w=1` to avoid the indentation-only change in commit `Add scripts to importwallet RPC `
- currently the scripts are followed with `# addr=` comments just as the other keys are, unsure if this might confuse users into thinking all the scripts are for valid P2SH addresses though, but I don't think that should be an issue.
- there are no birthtimes for scripts, so script imports don't affect rescans
- `importwallet` imports the CScripts but I'm not sure how to approach specifying whether scripts are for P2SH addresses, BIP173 addresses, etc. whether that matters or not. Otherwise the RPC helptext might just need modification.
Fixes#11715
Tree-SHA512: 36c55837b3a58b9d3499d4c0c2ae82153d62aa71919e751574651b63a1d2b8ecc83796db4553cc65dad9b5341c3a42ae2fcf4d62598c30af267f8e1461ba8272
aac6b3f067 Update files.md for new wallets/ subdirectory (MeshCollider)
b67342906c Cleanups for walletdir PR (MeshCollider)
Pull request description:
This addresses the remaining nits from https://github.com/bitcoin/bitcoin/pull/11466
- Updates `doc/files.md` with respect to the new default wallet directory
- Fixes @promag and @laanwj's error message nit, and Jonas' release notes nit
- ~Addresses @laanwj's net-specific wallet subdirectory concern in the case that a walletdir is specified~
- Changes the #includes from "" to <> style after #11651
Tree-SHA512: b86bf5fdc4de54c1b0f65b60a83af3cf82b35d216ce9c0de724803bfba6934796238b6c412659dcc29ae2e3e856d4eb97ae777c80f36f4089d8acecfddefe9aa
git keeps changing the number of digits in abbreviated hashes, resulting in the GitHub archive hash changing because we include it here.
To workaround this and avoid hashes that become increasingly ambiguous later on, just include the full commit hash when building from git.
This has no effect on tagged releases.
f455a24 [net] add seed.testnet.bitcoin.sprovoost.nl to testnet DNS seeds (Sjors Provoost)
Pull request description:
I tested it myself by:
* `dig seed.testnet.bitcoin.sprovoost.nl` (should have propagated by now, but if you only see two records with `A 66.111... ` try again later)
* deleting the other seeds and all data in `.../testnet3`, recompiling and then starting the node. Log shows `21 addresses found from DNS seeds`.
ACK https://github.com/bitcoin/bitcoin/blob/master/doc/dnsseed-policy.md
I'm willing to keep it up and running at least throughout 2018, unless something bad happens.
About my setup:
* Amazon EC2 instance in Europe, running Ubuntu 16.04; I use this instance for some other chores, but only port 53 is world reachable (for mainnet I'd probably run a dedicated instance, and perhaps a location I have physical control over)
* running [sipa/bitcoin-seeder](https://github.com/sipa/bitcoin-seeder) with default settings (and the non-root port redirect)
* feedback about my domain / DNS setup is welcome, I can provide more details via private email
I can use guidance on _Any hosting services contracted by the operator are equally expected to uphold these expectations_. Although I assume the requirements for testnet are less strict than for mainnet, in case I want to pursue the latter in the future: what unpleasant things can Amazon, my domain registrar and other intermediaries do? How would I mitigate that?
Also note that The Netherlands passed some pretty onerous legislation creating uncertainty over what the secret service can compel people like myself to do. However these laws won't take effect before mid 2018, there's probably more interesting targets than myself to go after, and it's easier for them to just monitor all unencrypted P2P traffic everywhere, or monitor some intermediary I depend on.
Any good tools for monitoring uptime?
Tree-SHA512: 386fe688e5006ab8352d93ab3954fc07dc566876ae002891baa51acfaa5bb113f51b1f5ca08c7394a530b10a2f5008c56d57153af3ed07544a305586dda06b97
2862b56 [tests] remove redundant univalue_tests.cpp (John Newbery)
Pull request description:
univalue unit tests were added in #4730 , and exist at `/src/test/univalue_tests.cpp` (outside the univalue tree). That test was brought into the univalue repository in https://github.com/bitcoin-core/univalue/pull/4 , which was pulled into the github repository in https://github.com/bitcoin/bitcoin/pull/11420.
That means that the univalue test exists in two places:
1. `/src/test/univalue_tests.cpp`
2. `/src/univalue/test/object.cpp`
(2) is a strict superset of (1). It adds some macros to work around boost not being a univalue dependency, and adds a few extra lines of test.
Therefore remove `/src/test/univalue_tests.cpp`
Tree-SHA512: 3747b10bbf62e9f12363905488b29945ad559ddca68c5c03d8a362de612a51f408f41a04d3712c6889bfc1632fb1a5fa0d7df0fbf02c322b3981a6d698f501b0
88411e9 Squashed 'src/univalue/' changes from fe805ea74f..07947ff2da (MarcoFalke)
Pull request description:
Pulls in the test changes to the univalue subtree.
Beside looking at the code, reviewers should refer to https://github.com/bitcoin/bitcoin/blob/master/contrib/devtools/README.md#git-subtree-checksh on how to verify the subtree pull.
Tree-SHA512: 09493625a573dca1140570326ee90c1bb84e4893e1dab2cdd51bc23ae1fba1e33c43ed771ca9e112ac71b0242e8a8d058071334562c738d502587eadd5a0f114
0.15.0 introduced a new feeest file format, and support for parsing
old versions was never fully added. We now simply fail to read the
old format, so remove the dead partial-implementation.
3a3a9f9 Ignore old format estimation file (Murch)
Pull request description:
The fee estimation data format changed from 0.14.x to 0.15.0, so we should no longer read the old data. H/T @jnewbery, @morcos
Pending testing.
Tree-SHA512: c8e3824dbdd8f6730133d5ad20b00995e9a63ab54431158a91e2f4d2aba5763b8aa698bce1fffca2713ba3a162e23d8fcd6e3efb9847b015c2e1e8725398150b
ecf9b25 remove unused fNoncriticalErrors variable from CWalletDB::FindWalletTx (Pierre Rochard)
Pull request description:
The `CWalletDB::FindWalletTx` method was patterned after `CWalletDB::LoadWallet`, where `fNoncriticalErrors` is used when a tx check fails in `ReadKeyValue`.
Since `FindWalletTx` is only used by methods which are zapping txs, it makes sense that `ReadKeyValue` is not called and the tx is not checked, so I think that deleting the unused `fNoncriticalErrors` boolean variable and its conditional statement is appropriate.
Tree-SHA512: 0976eae97522719fdaeca1fb3f4a080561e46c06d0b8dc75e14262c6bc242998db3f7057183a230a1d7e4ac5fc348e9059f545b7d718ebbcdf6dcdfc63bcc286
12781db [Tests] check specific validation error in miner tests (Sjors Provoost)
Pull request description:
## Problem
`BOOST_CHECK_THROW` merely checks that some `std::runtime_error` is
thrown, but not which one.
Here's an example of how this can cause a test to pass when a developer
introduces a consensus bug. The test for the sigops limit assumes
that `CreateNewBlock` fails with `bad-blk-sigops`. However it can
also fail with bad-txns-vout-negative, if a naive developer lowers
`BLOCKSUBSIDY` to `1*COIN`.
## Solution
`BOOST_CHECK_EXCEPTION` allows an additional predicate function. This
commit uses this for all exceptions that are checked for in
`miner_tets.cpp`:
* `bad-blk-sigops`
* `bad-cb-multiple`
* `bad-txns-inputs-missingorspent`
* `block-validation-failed`
If the function throws a different error, the test will fail. Although the message produced by Boost is a bit [confusing](http://boost.2283326.n4.nabble.com/Test-BOOST-CHECK-EXCEPTION-error-message-still-vague-tt4683257.html#a4683554), it does show which error was actually thrown. Here's what the above `1*COIN` bug would result in:
<img width="1134" alt="schermafbeelding 2017-09-02 om 23 42 29" src="https://user-images.githubusercontent.com/10217/29998976-815cabce-9038-11e7-9c46-f5f6cfb0ca7d.png">
## Other considerations
A more elegant solution in my opinion would be to subclass `std::runtime_error` for each `INVALID_TRANSACTION` type, but this would involve touching consensus code.
I put the predicates in `test_bitcoin.h` because I assume they can be reused in other test files. However [serialize_tests.cpp](https://github.com/bitcoin/bitcoin/blob/v0.15.0rc3/src/test/serialize_tests.cpp#L245) also uses `BOOST_CHECK_EXCEPTION` and it defines the predicate in the test file itself.
Instead of four `IsRejectInvalidReasonX(std::runtime_error const& e)` functions, I'd prefer something reusable like `bool IsRejectInvalidReason(String reason)(std::runtime_error const& e)`, which would be used like `BOOST_CHECK_EXCEPTION(functionThatThrows(), std::runtime_error, IsRejectInvalidReason("bad-blk-sigops")`. I couldn't figure out how to do that in C++.
Tree-SHA512: e364f19b4ac19f910f6e8d6533357f57ccddcbd9d53dcfaf923d424d2b9711446d6f36da193208b35788ca21863eadaa7becd9ad890334d334bccf8c2e63dee1
6f39ac0 Add test for decoderawtransaction bool (MeshCollider)
bbdbe80 Add iswitness parameter to decode- and fundrawtransaction RPCs (MeshCollider)
Pull request description:
Suggested in https://github.com/bitcoin/bitcoin/pull/10481#issuecomment-325244946, this adds the option to explicitly choose whether a serialized transaction should be decoded as a witness or non-witness transaction rather than relying on the heuristic checks in #10481. The parameter defaults to relying on #10481 if not included, but it overrides that if included.
Tree-SHA512: d4846a5bb7d64dc19c516445488b00af329fc1f4181d9dfdf9f2382a086568edc98250a4ac7594e24a1bc231dfdee53c699b12c8380c355b920a67cc6770b7a9
c79d73d Clarify getbalance meaning a tiny bit in response to questions. (Matt Corallo)
Pull request description:
Someone was asking why getbalance "*" was more "correct" than getbalance, which should rarely be true...spendzeroconfchange was the issue.
Tree-SHA512: 90201cad1acec5161aee469fb4c6d737a0eb90f8380ac93abf0e41e0f02d120afcc3e2e873e5096d3655bb63bbd16fe99e72452f308d72e69139c7f6bb2d745e
57ac471 Call BannedListChanged outside of cs_setBanned lock (Jonas Schnelli)
c853812 Update ban-state in case of dirty-state during periodic sweep (Jonas Schnelli)
Pull request description:
We do currently not update the UI during periodic ban list sweeps (via dump banlist).
Fixes#11612
Tree-SHA512: bffbdcc03c63042177bdd511b0a9187c211c2b5011178481e8ee3e43a71eef1e4cd6b72f73672babab142b644f62f8b56f0aac1d26d3f19372b1f8644fec9395
99ba0c3 Don't use pass by reference to const for cheaply-copied types (bool, char, etc.). (practicalswift)
Pull request description:
Don't use pass by reference to const for cheaply-copied types (`bool`, `char`, etc.).
Tree-SHA512: ccad5e2695dff0b3d6de3e713ff3448f2981168cdac72d73bee10ad346b9919d8d4d588933369e54657a244b8b222fa0bef919bc56d983e1fa64b2004e51b225
03a5dc9 [wallet] Make CWallet::FundTransaction atomic (João Barbosa)
95d4450 [wallet] Tidy up CWallet::FundTransaction (João Barbosa)
Pull request description:
This PR fixes a race for `setLockedCoins` when `lockUnspents` is true. For instance, it should not be possible to use the same unspent in concurrent `fundrawtransaction` calls.
Now the `cs_main` and `cs_wallet` locks are held during `CreateTransaction` and `LockCoin`(s). Also added some style nits around the change.
Tree-SHA512: ccf383c0c5f6db775655a3e9ccd200c3bd831a83afae2b7c389564c74f7227f5bea86a4775727de2c3603b188f383f8a12d3f9d6d94f7887865c31c94ce95ef6
88af502 test: Add createrawtransaction functional tests (João Barbosa)
27c6199 test: Add multidict to support dictionary with duplicate key (laanwj) (João Barbosa)
320669a rpc: Validate replaceable type in createrawtransaction (João Barbosa)
Pull request description:
This was motivated by the `Invalid parameter, duplicated address` test.
Credit to @laanwj for `multidict` implementation.
Tree-SHA512: a87139ae11004b73b467db1e8a072b75e23a0622b173a5668eed383b3575d8abc709817ddd2dfdc53f55afc90750fb61331199ad5de38c1ef6d482f2bc220f74
fbf327b Minimal code changes to allow msvc compilation. (Aaron Clauson)
Pull request description:
These changes are required to allow the Bitcoin source to build with Microsoft's C++ compiler (#11562 is also required).
I looked around for a better place for the typedef of ssize_t which is in random.h. The best candidate looks like src/compat.h but I figured including that header in random.h is a bigger change than the typedef. Note that the same typedef is in at least two other places including the OpenSSL and Berkeley DB headers so some of the Bitcoin code already picks it up.
Tree-SHA512: aa6cc6283015e08ab074641f9abdc116c4dc58574dc90f75e7a5af4cc82946d3052370e5cbe855fb6180c00f8dc66997d3724ff0412e4b7417e51b6602154825
3830b6e net: use CreateSocket for binds (Cory Fields)
df3bcf8 net: pass socket closing responsibility up to caller for outgoing connections (Cory Fields)
9e3b2f5 net: Move IsSelectableSocket check into socket creation (Cory Fields)
1729c29 net: split socket creation out of connection (Cory Fields)
Pull request description:
Requirement for #11227.
We'll need to create sockets and perform the actual connect in separate steps, so break them up.
#11227 adds an RAII wrapper around connection attempts, as a belt-and-suspenders in case a CloseSocket is missed.
Tree-SHA512: de675bb718cc56d68893c303b8057ca062c7431eaa17ae7c4829caed119fa3f15b404d8f52aca22a6bca6e73a26fb79e898b335d090ab015bf6456cf417fc694
We use select in ConnectSocketDirectly, so this check needs to happen before
that.
IsSelectableSocket will not be relevant after upcoming changes to remove select.
9c8eca7 Split up key and script metadata for better type safety (Russell Yanofsky)
Pull request description:
Suggested by @TheBlueMatt
https://github.com/bitcoin/bitcoin/pull/11403#discussion_r155599383
Combining the maps was probably never a good arrangement but is more
problematic now in presence of WitnessV0ScriptHash and WitnessV0KeyHash types.
Tree-SHA512: 9263e9c01090fb49221e91d88a88241a9691dda3e92d86041c8e284306a64d3af5e2438249f9dcc3e6e4a5c11c1a89f975a86d55690adf95bf2636f15f99f92a
a720b92 Remove includes in .cpp files for things the corresponding .h file already included (practicalswift)
Pull request description:
Remove includes in .cpp files for things the corresponding .h file already included.
Example case:
* `addrdb.cpp` includes `addrdb.h` and `fs.h`
* `addrdb.h` includes `fs.h`
Then remove the direct inclusion of `fs.h` in `addrman.cpp` and rely on the indirect inclusion of `fs.h` via the included `addrdb.h`.
In line with the header include guideline (see #10575).
Tree-SHA512: 8704b9de3011a4c234db336a39f7d2c139e741cf0f7aef08a5d3e05197e1e18286b863fdab25ae9638af4ff86b3d52e5cab9eed66bfa2476063aa5c79f9b0346
22fddde Avoid calling GetSerializeSize on each tx in a block if !fTxIndex (Matt Corallo)
2862aca Move some additional variables into CChainState private (Matt Corallo)
fd4d80a Create initial CChainState to hold chain state information (Matt Corallo)
e104f0f Move block writing out of AcceptBlock (Matt Corallo)
50701ba Move txindex/undo data disk location stuff out of ConnectBlock (Matt Corallo)
93a34cf Make DisconnectBlock unaware of where undo data resides on disk (Matt Corallo)
Pull request description:
CChainState should eventually, essentially, be our exposed "libconsensus", but we're probably a few releases away, so the real goal is to clarify our internal interfaces. The main split was a big step, but validation.cpp is still a somewhat ranomly-mixed bag of functions that are pure functions which validate inputs (which should probably either merge with their callers or move into another file in consensus/), read/write data from disk, manipulate our current chain state (which moves into CChainState), and do mempool transaction validation.
Obviously this is only a small step, but some effort is made to clean up what functions the functions in CChainState call, and obviously as things are added its easy to keep clear "CChainState::* cannot call anything except via callbacks through CValidationInterface, pure functions, or disk read/write things". Right now there are some glaring violations in mempool callbacks, and general flushing logic needs cleaning up (FlushStateToDisk maybe shouldnt be called, and there should be an API towards setDirtyBlockIndex, but I'll leave that for after @sipa's current changesets land).
Tree-SHA512: 69b8ec191b36b19c9492b4dee74c8057621fb6ec98ad219e8da0b2ed5c3ad711b10b5af9ff1117e8807ccf88918eeeab573be8448baecc9a59f099c53095985b
07c4838 Always return true if AppInitMain got to the end (Matt Corallo)
Pull request description:
This should fix a rare zapwallettxes failure on travis, but also
avoids having init operations (re-adding wallet transactions to
mempool) running after RPC is free'd.
I believe this was the failure at https://travis-ci.org/bitcoin/bitcoin/jobs/311747844 (from #11605).
Tree-SHA512: f0fea8c1b9265e2eeda57043d541380a3e58e4d9388fa24628a52fd56324257fcd7df0ca02e8f77f66fadd68d951893bab0f610ed9fd0a89b2ccd6bad1efa351
01013f5 Simplify tx validation tests (Pieter Wuille)
2dd6f80 Add a test that all flags are softforks (Pieter Wuille)
2851b77 Make all script verification flags softforks (Pieter Wuille)
Pull request description:
This change makes `SCRIPT_VERIFY_UPGRADABLE_NOPS` not apply to `OP_CHECKLOCKTIMEVERIFY` and `OP_CHECKSEQUENCEVERIFY`. This is a no-op as `UPGRADABLE_NOPS` is only set for mempool transactions, and those always have `SCRIPT_VERIFY_CHECKLOCKTIMEVERIFY` and `SCRIPT_VERIFY_CHECKSEQUENCEVERIFY` set as well. The advantage is that setting more flags now always results in a reduction in acceptable scripts (=softfork).
This results in a nice and testable property for validation, for which a new test is added.
This also means that the introduction of a new definition for a NOP or witness version will likely need the following procedure (example OP_NOP8 here)
* Remove OP_NOP8 from being affected by `SCRIPT_VERIFY_DISCOURAGE_UPGRADABLE_NOPS`.
* Add a `SCRIPT_VERIFY_DISCOURAGE_NOP8`, which only applies to `OP_NOP8`.
* Add a `SCRIPT_VERIFY_NOP8` which implements the new consensus logic.
* Before activation, add `SCRIPT_VERIFY_DISCOURAGE_NOP8` to the mempool flags.
* After activation, add `SCRIPT_VERIFY_NOP8` to both the mempool and consensus flags.
Tree-SHA512: d3b4538986ecf646aac9dba13a8d89318baf9e308e258547ca3b99e7c0509747f323edac6b1fea4e87e7d3c01b71193794b41679ae4f86f6e11ed6be3fd62c72
a3f5657 Add test cases covering the relevant key length boundaries: 64 bytes +/- 1 byte for HMAC-SHA256 and 128 bytes +/- 1 byte for HMAC-SHA512 (practicalswift)
Pull request description:
* Add test cases covering the relevant key length boundaries: 64 bytes +/- 1 byte for HMAC-SHA256 and 128 bytes +/- 1 byte for HMAC-SHA512.
* ~~Avoid creating a one-past-the-end pointer in the case of key length 64 (HMAC-SHA256) and key length 128 (HMAC-SHA512).~~
* ~~Avoid performing a noop memset call (zero length argument) in the case of key length 64 (HMAC-SHA256) and key length 128 (HMAC-SHA512).~~
Tree-SHA512: 48ff9ab79d41aab97b5b8f6496cc08a39955a07eb424f74ada6440d3b168b6204d3527fa677e175c47e40142f9d62c7456ae162e5a2f5b557e90fb353beef1d0
be9f38c Do not make it trivial for inbound peers to generate log entries (Matt Corallo)
Pull request description:
Based on #11580 because I'm lazy.
We should generally avoid writing to debug.log unconditionally for
inbound peers which misbehave (the peer being about to be banned
being an exception, since they cannot do this twice).
Tree-SHA512: 8e59c8d08d00b1527951b30f4842d010a4c2fc440503ade112baa2c1b9afd0e0d1c5c2df83dde25183a242af45089cf9b9f873b71796771232ffb6c5fc6cc0cc
6697a70 add test for unconfirmed balance between restarts (Gregory Sanders)
6ba8f30 don't attempt mempool entry for wallet transactions on startup if already in mempool (Gregory Sanders)
Pull request description:
…eady in mempool
Mempool loads first, wallet second. Second attempt fails, marking that transaction !fInMempool. Those funds will disappear until confirmation is reached.
Tree-SHA512: 955f0565ec1dc1ba395e0b803a98c07b7cd00c8cac5ec618ed832fed259a856fb7bbbe41310cf6a4e43c0435e09b156109d2a4467d403811dc8379d2caebeede
de74c62 [Doc] Update bip.md, add support for BIP 159 (Jonas Schnelli)
e054d0e [QA] Add node_network_limited test (Jonas Schnelli)
bd09416 Avoid leaking the prune height through getdata (fingerprinting countermeasure) (Jonas Schnelli)
27df193 Always set NODE_NETWORK_LIMITED bit (Jonas Schnelli)
7caba38 Add NODE_NETWORK_LIMITED flags and min block amount constants (Jonas Schnelli)
Pull request description:
Extracted from #10387.
Does implement BIP159, but only the signalling part. No connections are made to NODE_NETWORK_LIMITED in this PR.
The address relay and connection work (the more complicated part) can then be separated (probably in #10387).
Tree-SHA512: e3218eb4789a9320b0f42dc10f62d30c13c49bdef00443fbe653bee22933477adcfc1cf8f6a95269324560b5721203ed41f3c5e2dd8a98ec2791f6a9d8346b1a
f05d349 gui: Fix proxy setting options dialog crash (Wladimir J. van der Laan)
Pull request description:
This fixes a crash bug when opening the options dialog.
- Check the return value of split() to avoid segmentation faults due to out of bounds when the user manages to enter invalid proxy settings. This is reported resonably often.
- Move the default proxy/port to a constant instead of hardcoding magic values.
- Factor out some common code.
- Revert #11448 because this proves a more robust replacement, it is no longer necessary and didn't generally solve the issue.
No attempt is made to do full sanity checking on the proxy, so it can still be rejected by the core with an InitError message.
Tree-SHA512: 72b700b7d6c4d3e3410f0c60e9e4facf93d7c6c1a1b6b23957c48b074a045970f518166952859d1ebca8620062cb70d222670a7310bbd6fe50550ec6d04417b5
fa4c16d qa: Add getrawtransaction in_active_chain=False test (MarcoFalke)
Pull request description:
#10275 accidentally forgot to add a test for `in_active_chain==False`.
This adds a test and also removes the special casing of `blockhash.IsNull()`, which makes no sense imo.
Tree-SHA512: 6c51295820b3dcd53b0b48020ab2b8c8f5864cd5061ddab2b35d35d643eb3e60ef95ff20c06c985a2e47f7080e82f27f3e00ee61c85dce627776d5ea6febee8f
This fixes a crash bug when opening the options dialog.
- Check the return value of split() to avoid segmentation faults due to
out of bounds when the user manages to enter invalid proxy settings.
This is reported resonably often.
- Move the default proxy/port to a constant instead of hardcoding magic
values.
- Factor out some common code.
- Revert #11448 because this proves a more robust replacement, it is no
longer necessary and didn't generally solve the issue.
No attempt is made to do full sanity checking on the proxy, so it can
still be rejected by the core with an InitError message.
529b866 Test datadir in conf file exists (MeshCollider)
Pull request description:
Provoked by Nick ODell's discovery here: https://bitcoin.stackexchange.com/questions/64189/when-running-bitcoind-i-keep-getting-boostfilesystemspace-operation-not-p/64210#64210
If a custom data directory is specified using `-datadir` argument, its existence is checked before the conf file is loaded. But if the conf file then specifies a different non-existent `datadir`, that isn't tested, and results in esoteric errors like:
EXCEPTION: N5boost10filesystem16filesystem_errorE
boost::filesystem::space: Operation not permitted
This just adds a check for the datadir existence at the end of `ReadConfigFile()`
Tree-SHA512: e488618c40aa356263f94040ae00aa4be98038abef66e8674b01032d22a5553a7fafcb8fe2d1f095865b39fb138c07b7a94415a00ef837573f92f95af065f712
434526a [test] Add tests for getrawtransaction with block hash. (Karl-Johan Alm)
b167951 [rpc] Allow getrawtransaction to take optional blockhash to fetch transaction from a block directly. (Karl-Johan Alm)
a5f5a2c [rpc] Fix fVerbose parsing (remove excess if cases). (Karl-Johan Alm)
Pull request description:
[Reviewer hint: use [?w=1](https://github.com/bitcoin/bitcoin/pull/10275/files?w=1) to avoid seeing a bunch of indentation changes.]
Presuming a user knows the block hash of the block containing a given transaction, this PR allows them to fetch the raw transaction, even without `-txindex`. It also enables support for getting transactions that are in orphaned blocks.
Note that supplying a block hash will override mempool and txindex support in `GetTransaction`. The rationale behind this is that a transaction may be in multiple places (orphaned blocks) and if the user supplies an explicit block hash it should be adhered to.
```Bash
$ # a41.. is a tx inside an orphan block ..3c6f.. -- first try getting it normally
$ ./bitcoin-cli getrawtransaction a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79 1
error code: -5
error message:
No such mempool transaction. Use -txindex to enable blockchain transaction queries. Use gettransaction for wallet transactions.
$ # now try with block hash
$ ./bitcoin-cli getrawtransaction a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79 1 0000000000000000003c6fe479122bfa4a9187493937af1734e1e5cd9f198ec7
{
"hex": "01000000014e7e81144e42f6d65550e59b715d470c9301fd7ac189[...]90488ac00000000",
"inMainChain": false,
"txid": "a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79",
"hash": "a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79",
"size": 225,
[...]
}
$ # another tx 6c66... in block 462000
$ ./bitcoin-cli getrawtransaction 6c66b98191e9d6cc671f6817142152ebf6c5cab2ef008397b5a71ac13255a735 1 00000000000000000217f2c12922e321f6d4aa933ce88005a9a493c503054a40
{
"hex": "0200000004d157[...]88acaf0c0700",
"inMainChain": true,
"txid": "6c66b98191e9d6cc671f6817142152ebf6c5cab2ef008397b5a71ac13255a735",
"hash": "6c66b98191e9d6cc671f6817142152ebf6c5cab2ef008397b5a71ac13255a735",
"size": 666,
[...]
}
$
```
Tree-SHA512: 279be3818141edd3cc194a9ee65929331920afb30297ab2d6da07293a2d7311afee5c8b00c6457477d9f1f86e86786a9b56878ea3ee19fa2629b829d042d0cda
This should fix a very rare travis failure in zapwallettxes, but
is also more correct, as you can currently race
ReacceptWalletTransactions with stop RPC calls to get bitcoind to
(IMO) eroneously return a non-0 exit code.
5a7c09a test: Add tests for `-debuglogfile` with subdirs (Anthony Towns)
4158734 doc: Update release notes for `-debuglogfile` (Wladimir J. van der Laan)
2323242 test: Add test for `-debuglogfile` (Wladimir J. van der Laan)
cf5f432 Add `-debuglogfile` option (Wladimir J. van der Laan)
Pull request description:
This patch adds an option to configure the name and/or directory of the debug log file.
The user can specify either a relative path, in which case the path is relative to the (network specific) data directory. They can also specify an absolute path to put the log anywhere else in the file system.
Alternative to #11741 that gets rid of the concept of a "log directory" by specifying the path for the specific kind of log, the debug log. Which happens to be the only kind of log we have at this point*, but a hypothetical new kind of log (say, an audit log) would get a new option. This has more flexibility than specifying a directory which has to contain all of them.
\* excluding `db.log` which is internally generated by the wallet database library, but that one moves along with `-walletdir`.
Tree-SHA512: 4434d0e598dc23504e5c9e67fdbaef56db4f0fd490f9f54fd503e69d4dda9b5b69c539e1794ed841e72161b7b1dc3374d2f1193dd431b057566750e56fd8f24b
b4058ed Fix code constness in CBlockIndex::GetAncestor() overloads (Dan Raviv)
Pull request description:
Make the non-const overload of `CBlockIndex::GetAncestor()` reuse the const overload implementation instead of the other way around. This way, the constness of the const overload implementation is guaranteed. The other way around, it was possible to implement the non-const overload in a way which mutates the object, and since that implementation would be called even for const objects (due to the reuse), we would get undefined behavior.
Tree-SHA512: 545a8639bc52502ea06dbd924e8fabec6274fa69b43e3b8966a7987ce4dae6fb2498f623730fde7ed0e47478941c7f8baa2e76a12018134ff7c14c0dfa25ba3a
680bc2cbb Use range-based for loops (C++11) when looping over map elements (practicalswift)
Pull request description:
Before this commit:
```c++
for (std::map<T1, T2>::iterator x = y.begin(); x != y.end(); ++x) {
T1 z = (*x).first;
…
}
```
After this commit:
```c++
for (auto& x : y) {
T1 z = x.first;
…
}
```
Tree-SHA512: 954b136b7f5e6df09f39248a6b530fd9baa9ab59d7c2c7eb369fd4afbb591b7a52c92ee25f87f1745f47b41d6828b7abfd395b43daf84a55b4e6a3d45015e3a0
e4d0af4 Loop through the bip9 soft fork deployments instead of hard coding (Andrew Chow)
Pull request description:
Instead of hard coding which deployment statistics should be listed in the `getblockchaininfo` output, loop through the available deployments (except testdummy) when displaying their deployment info.
Tree-SHA512: 87e503bcf5e0fd379940d5e53320b9cbb4b47d647c66246d46f47c09a941f135e6ce1e8b75dad441ed4c22c3f41992dfde7717414be1d71c771d4ff8fe0e1936
9b80fc1 Prefix leveldb debug logging (Wladimir J. van der Laan)
Pull request description:
Add leveldb: prefix to leveldb debug logging lines.
leveldb debug messages come in various scary flavors such as:
2017-11-30 08:26:31 leveldb: Recovering log #26
2017-11-30 08:26:31 leveldb: Level-0 table #28: started
2017-11-30 08:26:31 leveldb: Level-0 table #28: 597 bytes OK
2017-11-30 08:26:31 leveldb: Delete type=0 #26
2017-11-30 08:26:31 leveldb: Delete type=3 #24
so it's reasonably important to mark them as coming from leveldb internals and not from consensus validation wallet or such.
This is consistent with the `libevent:` prefix for libevent messages.
(this only affects `-debug=leveldb` or `-debug=1` otherwise you won't see them in the first place)
Tree-SHA512: 074eba00d39c6378b9e14d03aa2c551b4e3fc7bffdd5a1a0ba2498b44bcc77071d47735be09493286056053f0cca625c5cbaad7ad1ddb9d902d30e7cd316d9d2
This patch adds an option to configure the name and/or directory of the
debug log.
The user can specify either a relative path, in which case the path
is relative to the data directory. They can also specify an absolute
path to put the log anywhere else in the file system.
d31e5c1 Fix shutdown in case of errors during initialization (Wladimir J. van der Laan)
Pull request description:
PR #10286 introduced a few steps which are not robust to early shutdown in initialization.
Stumbled upon this with #11781, not sure if there are other scenarios that can trigger it, but it's good to harden against this in any case.
E.g.
```
$ src/bitcoind -debuglogfile=/dfdf
Error: Could not open debug log file /dfdf
Program received signal SIGSEGV, Segmentation fault.
UnregisterValidationInterface (pwalletIn=0x0) at /.../bitcoin/src/validationinterface.cpp:82
82 g_signals.m_internals->BlockChecked.disconnect(boost::bind(&CValidationInterface::BlockChecked, pwalletIn, _1, _2));
(gdb) bt
#0 UnregisterValidationInterface (pwalletIn=0x0) at /.../bitcoin/src/validationinterface.cpp:82
#1 0x00005555555a11fc in Shutdown () at /.../bitcoin/src/init.cpp:196
#2 0x00005555555961cc in AppInit (argc=<optimized out>, argv=<optimized out>) at /.../bitcoin/src/bitcoind.cpp:183
#3 0x0000555555596249 in main (argc=0, argv=0x555555ecf200) at /.../bitcoin/src/bitcoind.cpp:19
```
Tree-SHA512: 7dd9570a9803514a17781bfadf1edde47e96df4e852cce2f423cab422e005fb94d44e777af1a6ea5167b04a4d889e848ae7a61a7e0e94232247ddea32ee70fc8
c60c49b Improve help text and behavior of RPC-logging (Akio Nakamura)
Pull request description:
1. It is allowed `libevent` logging to be updated during runtime,
but still described that restriction in the help text.
So we delete these text.
2. Add a descrption about the evaluation order of `<include>` and
`<exclude>` to clarify how debug loggig categories to be set.
3. Add a description about the available logging category `"all"`
which is not explained.
4. Add `"optional"` to the help text of `<include>` and `<exclude>`.
5. Add missing new lines before `"Argument:"`.
6. `"0"`,`"1"` are allowed in both array of `<include>` and `<exclude>`.
`"0"` is **ignored** and `"1"` is treated **same as** `"all"`.
It is confusing, so forbid them.
7. It always returns all logging categories with status.
Fix the help text to match this behavior.
Tree-SHA512: c2142da1a9bf714af8ebc38ac0d82394e2073fc0bd56f136372e3db7b2af3b6746f8d6b0241fe66c1698c208c124deb076be83f07dec0d0a180ad150593af415
Add leveldb: prefix to leveldb debug logging lines.
leveldb debug messages come in various scary flavors such as:
2017-11-30 08:26:31 leveldb: Recovering log #26
2017-11-30 08:26:31 leveldb: Level-0 table #28: started
2017-11-30 08:26:31 leveldb: Level-0 table #28: 597 bytes OK
2017-11-30 08:26:31 leveldb: Delete type=0 #26
2017-11-30 08:26:31 leveldb: Delete type=3 #24
so it's reasonably important to mark them as coming from leveldb
internals and not from consensus validation wallet or such.
(this only affects `-debug=leveldb` or `-debug=1` otherwise you won't
see them in the first place)
8b2c733 clarify abortrescan rpc use (Gregory Sanders)
Pull request description:
`-rescan` during startup doesn't apply since RPC has not warmed up by that point
Tree-SHA512: 0b6738ed9429ca41edbfa23bb3e2da23bb16fed9e55c1803ab140b2efc49ef3295bb8b7eeb8c24df94204c5b3fb25d0d57cbc8d1be11856a5763c9fde71bceba
9d811dc Document partial validation in ConnectBlock() (Suhas Daftuar)
Pull request description:
`ConnectBlock()` relies on validation that happens in `ContextualCheckBlock()` and
`ContextualCheckBlockHeader()`. This has implications for implementing consensus
changes and handling software upgrade to ensure that nodes upgrading their
software end up enforcing all the consensus rules.
Tree-SHA512: 36a252af2221b0e5d5d6f8d5f8b16f8b566ca0db2d56242130a5523302c8757599ac234594a6a946c1689b260d18a32c2c7f8c3831304e78b9832e2ce5ac435a
e1a8ec5 Fix: Open files read only if requested (Andras Elso)
Tree-SHA512: 047951bf3fa1272764596d2efed0a541105a6d3057789ba4218cd1bbce8a802cab0feac0ed3d28f6eab6b2e54e294d46f729dd0162d6d209e319d716c0567352
PR #10286 introduced a few steps which are not robust to early shutdown
in initialization.
Stumbled upon this with #11781, not sure if there are other scenarios
that can trigger it, but it's harden against this in any case.
abbd230 Move RPC registration out of AppInitParameterInteraction (Russell Yanofsky)
Pull request description:
Move to AppInitServers. This doesn't have any effects on bitcoin behavior. It was just strange to have this unrelated code in the middle of parameter interaction.
Tree-SHA512: 373e18f2ef8d21999ad36295d69326128a3086044acfc8ed537abd5497c8d3620b9832f7f6aa87c0c0939bb5e0d92be8a3c006b5997e9e6fa20334f5610c89bc
blockchain.cpp has low unit test coverage. This commit is intended
to start improving its code coverage to reasonable levels. One or more
follow up commits will complete the task that this commit is starting
(though the usefulness of this commit is not dependent upon later
commits).
Note that these tests were not written based upon a specification of how
GetDifficulty *should* work, but rather how it actually *does* work. As
a result, if there are any bugs in the current GetDifficulty
implementation, these unit tests serve to lock them in rather than
expose them.
-- Why has blockchain.cpp been modified if this is a unit testing change?
Since the existing GetDifficulty function relies on a global variable,
chainActive, it was not suitable for unit testing purposes. Both the
existing GetDifficulty function and the unit tests now call through to
a new, more modular version of GetDifficulty that can work on any chain,
not just chainActive.
-- Why does blockchain_tests.cpp directly include blockchain.cpp instead
of blockchain.h?
While the new GetDifficulty function's signature is arguably better than
the old one's, it still isn't great, and doesn't seem to warrant inclusion
as part of the blockchain.h API, especially since only test code is
directly using it. If a better way of exposing the new GetDifficulty
function to unit tests exists, please mention it and the commit will be
updated accordingly.
-- Why is the test fixture named blockchain_difficulty_tests rather than
blockchain_tests?
The Bitcoin Core policy for naming unit test files is to match the the
file under test ("blockchain" becomes "blockchain_tests"). While this
commit complies with that, blockchain.cpp is a massive file, such that
having all of the unit tests in one file will tend towards disorder.
Since there will be a lot more tests added to this file, the intention
is to divide up different types of tests into different test fixtures
within the same file.
d9340ce Fix sendrawtransaction hang when sending a tx already in mempool (Matt Corallo)
Pull request description:
I assume this is what #11721 actually hit.
Tree-SHA512: 1da4088bbda64c5527233de9ec4d03f9e0c1eacddb2ed3deab3cb99eac0293ee6fb846830f97b5e10e230307b6d7fd18013043173aa4f27ef171d9da626e2c88
65e91f5ed [tests] Test that mempool rejects coinbase transactions (James O'Beirne)
Pull request description:
Neither the unit nor functional tests appear to cover rejecting a transaction from acceptance to the mempool on the basis of it being a coinbase. Seems like a decent thing to have a test for.
Tree-SHA512: 53af53c975cad5d7a21c443d71a1c0ced5c70a7799b75bb44d9b7dd6ab2afbcdcaab14571540efeb848f3a1daee5e1dd856530d8f2b50582595219a1c17555ff
ConnectBlock() relies on validation that happens in ContextualCheckBlock() and
ContextualCheckBlockHeader(). This has implications for implementing consensus
changes and handling software upgrade to ensure that nodes upgrading their
software end up enforcing all the consensus rules.
A) The changes in behavior are as follows:
1. Introduce logging category "none" as alias of "0" for
both RPC-logging and bitcoind "-debug" parameter.
2. Same as "0" is given to argument of "-debug",
if "none" or "0" is given to <include>, all other given logging
categories are ignored. The same is true for <exclude>.
(Before this PR, "0" was accepted but just be ignored itself.)
B) The changes in the help text are as follows:
1. Add a descrption about the evaluation order of <include> and
<exclude> to clarify how debug loggig categories to be set.
2. Delete text that describe restriction about libevent because
it's already allowed libevent logging to be updated during runtime.
3. Add a description for category "all", "1", "none" and "0".
4. Add "optional" to the help text of <include> and <exclude>.
5. Add missing new lines before "Argument:".
6. This RPC always returns all logging categories with status.
Fix the help text to match this behavior.
c3055bb Add help-console command to Qt debug console (Luke Mlsna)
Pull request description:
This PR would close issue #9195 by adding documentation for the debug console features (mainly nested commands) which were added in [PR #7783](https://github.com/bitcoin/bitcoin/pull/7783).
The following changes were made to QT debug console code:
- Added a line to the initial message text at the top of the debug console:
> For more information on using this console type **help-console**.
- Added a pseudo-command `help-console` which is hooked after parsing the request, but before actually executing the RPC thread. It prints the following text to the console as if it were a valid RPC response.
> This console accepts RPC commands using the standard syntax.
> example: getblockhash 8
> This console can also accept RPC commands using bracketed syntax.
> example: getblockhash(8)
> A space or a comma can be used to separate arguments for either syntax.
> example: sendtoaddress \<address\> \<amount\>
> sendtoaddress,\<address\>,\<amount\>
> Commands may be nested when specified with the bracketed syntax.
> example: getblockinfo(getblockhash(0),true).
> Result values can be queried with a non-quoted string in brackets.
> example: getblock(getblockhash(0) true)[height]
This seemed like a reasonably sane way to introduce a fake RPC help command, but
Tree-SHA512: 35d73dcef9c4936b8be99e80978169f117c22b94f4400c91097bf7e0e1489060202dcd738d9debdf4c8a7bd10709e2c19d4f625f19e47c4a034f1d6019c0e0f2
49bd659 tests: move pwalletMain to wallet test fixture (Wladimir J. van der Laan)
Pull request description:
Scope the variable instead of using an external global; this is how test fixtures are intended to be used.
Followup to #11713.
Tree-SHA512: 7d5bda93cdfe1329c8fe39bd72965906e36dad72fbb5d344ebedf26e66b1857510d01a3c2872d7f718fdeb23365e6ba71991aafe68e82781c6767a086b6d1590
c1e5d40 Make debugging test crash easier (MeshCollider)
8263f6a Create walletdir if datadir doesn't exist and fix tests (MeshCollider)
9587a9c Default walletdir is wallets/ if it exists (MeshCollider)
d987889 Add release notes for -walletdir and wallets/ dir (MeshCollider)
80c5cbc Add test for -walletdir (MeshCollider)
0530ba0 Add -walletdir parameter to specify custom wallet dir (MeshCollider)
Pull request description:
Closes#11348
Adds a `-walletdir` parameter which specifies a directory to use for wallets, allowing them to be stored separately from the 'main' data directory. Creates a new `wallets/` directory in datadir if this is the first time running, and defaults to using it if it exists.
Includes tests and release notes. Things which might need to be considered more:
- there is no 'lock' on the wallets directory, which might be needed?
- because this uses a new wallets/ directory by default, downgrading to an earlier version won't see the wallets in that directory (not a big deal though, users can just copy them up to the main dir)
- jnewbery suggested putting each wallet in its own directory, which is a good idea, but out of scope for this PR IMO. EDIT: this is being done in https://github.com/bitcoin/bitcoin/pull/11687
- doc/files.md needs updating (will do soon)
I also considered including a cleanup by removing caching of data directory paths and instead just initialise them once on startup (c.f. #3073), but decided it wasn't super relevant here will just complicate review.
Tree-SHA512: c8ac04bfe9a810c32055f2c8b8fa0d535e56125ceb8d96f12447dd3538bf3e5ee992b60b1cd2173bf5f3fa023a9feab12c9963593bf27ed419df929bb413398d
f94c2ec Fix for mismatched extern definition in wallet test classes which was breaking msvc linking. (Aaron Clauson)
Pull request description:
The extern declarations are using a raw pointer which doesn't match the source variable's std::unqiue_ptr.
Tree-SHA512: 1500ffa1282ee6565741bf2f8f9def68a355346c8e4a667e1167d3d550eb0b732e8cba52fbef380a92c860e686d36da877d800ee5f2fc1e4dd8fd88fbe170644
Opt-in RBF checkbox uses less technical jargon and emphasises
the fee bump functionality (at the expense of not mentioning
other uses of RBF).
The transaction confirmation screen uses copy consistent with this.
dcfef27 cli: Reject arguments to -getinfo (Wladimir J. van der Laan)
Pull request description:
Currently it's possible to accidentally type e.g.
bitcoin-cli -getinfo getbalance
and get an answer which can be confusing; the trailing arguments are just ignored.
To avoid this, throw an error if the user provides arguments to
`-getinfo`.
Tree-SHA512: 3603e8fa852b884d1dd3b7462db40b092fe8b3390fd4384b4ee330315d797aff711e9f62990012fd4b5a55c8678734ba8497a5488a09ee6b65cf8a99017d6eb4
- Added `help-console` to the list of autocompletion strings
- Implemented requested changes to help message:
- Added an example that uses access-by-index `getblock(getblockhash(0) true)[tx][0]`
- Replace "bracketed syntax" to "parenthesized syntax" where applicable
- Replace "separate" with "delimit"
- Removed `<br>` and `<b>help/help-console</b>` from translation strings, since these parts don't change between languages
- Changed examples to be based off `getblock 0` so they will work even with pruned/no blockchain and `disablewallet` if copied and pasted
- Clarified syntax for queries of named/unnamed result objects.
ac1cf8d Trivial: Improve #endif comments (danra)
Pull request description:
Improve the #endif comments for the '#if HAVE_DECL_BSWAP_XX == 0' preprocessor conditions, so each shows the full condition which it closes.
Tree-SHA512: f533311fa48cb2f46f6490b6c965ad5f8861dcfad70c56d70e31fa989b422880c78b2dd6f24f648b19d3a22f767606e0de5cf1cb71445012b42c97ac2149295e
Currently it's possible to accidentally type e.g.
bitcoin-cli -getinfo getbalance
and get an answer which can be confusing; the trialing arguments are
just ignored.
To avoid this, throw an error if the user provides arguments to
`-getinfo`.
28f8b66 Diagnose unsuitable outputs in lockunspent(). (Eelis)
Pull request description:
Fixes#2667.
This is a simplified version of pull request #3574, which was abandoned by its author.
I added some tests as well.
Tree-SHA512: e63e00dec8b1b232079380183805cb0b0b18c78ea6bea769837949aab984689d7f68b2ccfe66b1873517b040b9e616ce0eb058575c3d4382aa8c26eebcf1f14e
069215e Initialize recently introduced non-static class member lastCycles to zero in constructor (practicalswift)
Pull request description:
Initialize recently introduced non-static class member `lastCycles` to zero in constructor.
`lastCycles` was introduced in 3532818746 which was merged into master yesterday.
Friendly ping @laanwj :-)
Tree-SHA512: cb93b6a8f6e2e3b06cd05a635da95c84f3df64c21fc23fe82f98306ea571badc32040315b563e46ddb5203128226bc334269acd497beead5a5777c434060fd85
This makes all include paths in the GUI absolute.
Many changes are involved as every single source file in
src/qt/ assumes to be able to use relative includes.
aed1d90ac [wallet] Change feebumper from class to functions (Russell Yanofsky)
37bdcca3c [refactor] Make feebumper namespace (Russell Yanofsky)
7c4f00919 [trivial] Rename feebumper variables according to project code style (Russell Yanofsky)
Pull request description:
Make feebumper methods static and remove stored state in the class.
Having the results of feebumper calls persist in an object makes process
separation between Qt and wallet awkward, because it means the feebumper object
either has to be serialized back and forth between Qt and wallet processes
between fee bump calls, or that the feebumper object needs to stay alive in the
wallet process with an object reference passed back to Qt. It's simpler just to
have fee bumper calls return their results immediately instead of storing them
in an object with an extended lifetime.
In addition to making feebumper methods static, also:
- Move LOCK calls from Qt code to feebumper
- Move TransactionCanBeBumped implementation from Qt code to feebumper
- Rename CFeeBumper class to FeeBumper (every CFeeBumper reference had to be
updated in this PR anyway so this doesn't increase the size of the diff)
This change was originally part of https://github.com/bitcoin/bitcoin/pull/10244
Tree-SHA512: bf75e0c741b4e9c8912e66cc1dedf0ff715f77ea65fc33f7020d97d9099b0f6448f5852236dac63eea649de7d6fc03b0b21492e2c5140fb7560a39cf085506fd
89f0312 Remove redundant pwallet nullptr check (Matt Corallo)
c4784b5 Add a dev notes document describing the new wallet RPC blocking (Matt Corallo)
3ea8b75 Give ZMQ consistent order with UpdatedBlockTip on scheduler thread (Matt Corallo)
cb06edf Fix wallet RPC race by waiting for callbacks in sendrawtransaction (Matt Corallo)
e545ded Also call other wallet notify callbacks in scheduler thread (Matt Corallo)
17220d6 Use callbacks to cache whether wallet transactions are in mempool (Matt Corallo)
5d67a78 Add calls to CWallet::BlockUntilSyncedToCurrentChain() in RPCs (Matt Corallo)
5ee3172 Add CWallet::BlockUntilSyncedToCurrentChain() (Matt Corallo)
0b2f42d Add CallFunctionInQueue to wait on validation interface queue drain (Matt Corallo)
2b4b345 Add ability to assert a lock is not held in DEBUG_LOCKORDER (Matt Corallo)
0343676 Call TransactionRemovedFromMempool in the CScheduler thread (Matt Corallo)
a7d3936 Add a CValidationInterface::TransactionRemovedFromMempool (Matt Corallo)
Pull request description:
Based on #10179, this effectively reverts #9583, regaining most of the original speedups of #7946.
This concludes the work of #9725, #10178, and #10179.
See individual commit messages for more information.
Tree-SHA512: eead4809b0a75d1fb33b0765174ff52c972e45040635e38cf3686cef310859c1e6b3c00e7186cbd17374c6ae547bfbd6c1718fe36f26c76ba8a8b052d6ed7bc9
63c2d83 Explicitly state assumption that state.m_chain_sync.m_work_header != nullptr in ConsiderEviction (practicalswift)
Pull request description:
Explicitly state assumption that `state.m_chain_sync.m_work_header != nullptr` in `ConsiderEviction(…)`.
Static analyzer (and humans!) will see the null-check in ...
```
else if (state.m_chain_sync.m_timeout == 0 || (state.m_chain_sync.m_work_header != nullptr && ...
```
... and infer that `state.m_chain_sync.m_work_header` might be set to `nullptr` when reaching `else if (state.m_chain_sync.m_timeout > 0 && time_in_seconds > state.m_chain_sync.m_timeout)` and thus flag `state.m_chain_sync.m_work_header->GetBlockHash().ToString()` as a potential null pointer dereference.
This commit makes the tacit assumption of `state.m_chain_sync.m_work_header != nullptr` explicit.
Code introduced in 5a6d00c6de ("Permit disconnection of outbound peers on bad/slow chains") which was merged into master four days ago.
Friendly ping @sdaftuar :-)
Tree-SHA512: 32e5631025b7ba7556a02c89d040fbe339c482a03f28d0dbc9871c699e1f8ac867619b89c5fd41fdcfcf0dc4d7c859295b26ccd988572145cc244261aec18ce9
927f4ff5a GUI: Receive: Remove option to reuse a previous address (Luke Dashjr)
Pull request description:
This was justified by the need to "resent" an invoice, but now that we have the request history, that need should be gone.
Tree-SHA512: 4ade4eb84a21bbbd8dcc3a2c9580d416e113284b5bdf350c22051c233101fe0ee31659c54a7a46e7136f9c999acb61efbbb3f97aeb2fa7b2b1e1daec02ca0837
5e0ba8f8c [wallet] getreceivedbyaddress should return error if address is not mine (John Newbery)
ea0cd24f7 [tests] Tidy up receivedby.py (John Newbery)
Pull request description:
Two commits:
- First commit tidies up the `receivedby.py` test (and speeds it up by factor of two)
- Second commit changes getreceivedbyaddress to return error if the address is not found in wallet, and adds test to `receivedby.py`
Tree-SHA512: e41342dcbd037a6b440cbe4ecd3b8ed589e18e477333f0d866f3564e948e0f5231e497d5ffb66da4e6680eb772d9f0cf839125098bb68b92d04a5ee35c6c0a81
11413646b [trivial] (whitespace only) fix getblockchaininfo alignment (John Newbery)
bd9c18171 [rpc] Add initialblockdownload to getblockchaininfo (John Newbery)
Pull request description:
Exposing whether the node is in IBD would help for testing, and may be useful in general, particularly for developers.
First discussed in #10357 here: https://github.com/bitcoin/bitcoin/pull/10357#pullrequestreview-59963870
> ... we could simplify this (and possibly other) tests by just adding a way to know if a node is in IBD. I'd like to do that, but I'm not sure it makes sense to complicate this PR with discussion over how that information should be made available. Eg it's not clear to me that the notion of being in IBD is worth exposing to the casual user, versus a hidden rpc call or something, since the definition has changed over time, and may continue to change in the future. But I still do agree that at least for testing purposes it would be far simpler to expose the field somehow...
This PR currently implements the simplest way of doing this: adding an `initialblockdownload` field to `getblockchaininfo`. Other approaches we could take:
1. add a new debug RPC method that exposes `IBD` and potentially other information.
2. add a parameter to `getblockchaininfo`, eg `debug_info`, which would cause it to return debug information including IBD
3. add a query string to the url `?debug=true` which would cause RPCs to return additional debug information.
I quite like the idea of (3). Feedback on these and other approaches very much welcomed!
@sdaftuar @laanwj
Tree-SHA512: a6dedd47f8c9bd38769cc597524466250041136feb33500644b9c48d0ffe4e3eeeb2587b5bbc6420364ebdd2667df807fbb50416f9a7913bbf11a14ea86dc0d4
Change feebumper from a stateful class into a namespace of stateless
functions.
Having the results of feebumper calls persist in an object makes process
separation between Qt and wallet awkward, because it means the feebumper object
either has to be serialized back and forth between Qt and wallet processes
between fee bump calls, or that the feebumper object needs to stay alive in the
wallet process with an object reference passed back to Qt. It's simpler just to
have fee bumper calls return their results immediately instead of storing them
in an object with an extended lifetime.
In addition to making feebumper stateless, also:
- Move LOCK calls from Qt code to feebumper
- Move TransactionCanBeBumped implementation from Qt code to feebumper
Future commit will remove the FeeBumper class. This commit simply places
everything into a feebumper namespace, and changes the enum class name
from BumpeFeeResult to feebumper::Result.
Future PRs will completely refactor this translation unit and touch all
this code so we rename the variables to follow project stlye guidelines
in this preparation commit.
Don't use m_ prefixes for member variables since we're going to remove
the class entirely in the next commits.
203a4aa31 Fix CTxMemPoolEntry::UpdateAncestorState: modifySigOps param type int -> int64_t (donaloconnor)
Pull request description:
CTxMemPoolEntry::CTxMemPoolEntry's modifySigOps parameter is int while update_ancestor_state::modifySigOpsCost is int64_t. This issue was raised in #11165. It looks like the function paramaters were not changed in commit 72abd2c
This will avoid unexpected truncation of int64_t -> int
Tree-SHA512: 314c703f217e104336456859066d18fb0d12c4f9f32835e17490a6f29eb05951184095039e4e57edacef8ad35dd75c6d97d9af656a52209dd0c3779b4ffa0914
5b9748f97 Small refactor of CCoinsViewCache::BatchWrite() (Dan Raviv)
Pull request description:
`std::unordered_map::erase( const_iterator pos )` returns an iterator to the element following the removed one. Use that to optimize (probably minor-performance-wise, and definitely code-structure-wise) the implementation of `CCoinsViewCache::BatchWrite()`.
Tree-SHA512: 00abc838ad91771cfcddd45688841c9414869b75289d09b483a7f0ba835614fe189e9c8aca8a80e3de78ee397ec14083ae52e2e92b7863b3b6eb0d0cb892c9dd
d052e3847 [qt] Add use available balance in send coins dialog (CryptAxe)
Pull request description:
This is an alternative to #11098 to handle #11033 where a new button `Use available balance` is added to each entry. When activated, the available balance is calculated by using the coin control (if any) and then it's subtracted the remaining recipient amounts. If this amount is positive then the `Subtract fee from amount` is automatically selected.
Comparing to #11098, this has the advantage to avoid the fair amount division over the recipients and allows to fine adjust the amounts in multiple iterations.
Started from @CryptAxe commit 89e9eda to credit some code.
<img width="965" alt="screen shot 2017-09-13 at 01 32 44" src="https://user-images.githubusercontent.com/3534524/30354518-e1bee31c-9824-11e7-9354-300aa63cdfd0.png">
<img width="964" alt="screen shot 2017-09-13 at 01 44 57" src="https://user-images.githubusercontent.com/3534524/30354598-5731ac9c-9825-11e7-9d5f-8781988ed219.png">
Tree-SHA512: 01d20c13fd8b6c2a0ca1d74d3a9027c6922e6dccd3b08e59d5a72636be7072ed5eca7ebc5d431299497dd3374e83753220ad4174d8bc46dadb4b2f54973036a5
Static analyzer (and humans!) will see ...
```
else if (state.m_chain_sync.m_timeout == 0 || (state.m_chain_sync.m_work_header != nullptr && ...
```
... and infer that state.m_chain_sync.m_work_header might be set to nullptr,
and thus flag `state.m_chain_sync.m_work_header->GetBlockHash().ToString()`
as a potential null pointer dereference.
This commit makes the tacit assumption (m_work_header != nullptr) explicit.
Code introduced in 5a6d00 ("Permit disconnection of outbound peers on
bad/slow chains") which was merged into master four days ago.
620bae3 Require a steady clock for bench with at least micro precision (Matt Corallo)
Pull request description:
Using a non-steady high_precision_clock by default is definitely not what we want, and in practice steady_clock has more than enough precision. Should double-check that travis passes on this one to make sure we actually have at least microsecond precision on all platforms.
Tree-SHA512: 54a4af3b6addca9897e8ab04694f9461343691b475ca3ed2368595c37520612e284969be94a8ee3d7c66d16532f7bb16b6ad80284cbc153653e8ef2d56696e9d
We should generally avoid writing to debug.log unconditionally for
inbound peers which misbehave (the peer being about to be banned
being an exception, since they cannot do this twice).
To avoid removing logs for outbound peers, a new log is added to
notify users when a new outbound peer is connected which mimics
the version print.
a357293 Use MakeUnique<Db>(...) (practicalswift)
3e09b39 Use MakeUnique<T>(...) instead of std::unique_ptr<T>(new T(...)) (practicalswift)
8617989 Add MakeUnique (substitute for C++14 std::make_unique) (practicalswift)
d223bc9 Use unique_ptr for pcoinscatcher/pcoinsdbview/pcoinsTip/pblocktree (practicalswift)
b45c597 Use unique_ptr for pdbCopy (Db) and fix potential memory leak (practicalswift)
29ab96d Use unique_ptr for dbenv (DbEnv) (practicalswift)
f72cbf9 Use unique_ptr for pfilter (CBloomFilter) (practicalswift)
8ccf1bb Use unique_ptr for sem{Addnode,Outbound} (CSemaphore) (practicalswift)
73db063 Use unique_ptr for upnp_thread (boost::thread) (practicalswift)
0024531 Use unique_ptr for dbw (CDBWrapper) (practicalswift)
fa6d122 Use unique_ptr:s for {fee,short,long}Stats (TxConfirmStats) (practicalswift)
5a6f768 Use unique_ptr for httpRPCTimerInterface (HTTPRPCTimerInterface) (practicalswift)
860e912 Use unique_ptr for pwalletMain (CWallet) (practicalswift)
Pull request description:
Use `std::unique_ptr` (C++11) where possible.
Rationale:
1. Avoid resource leaks (specifically: forgetting to `delete` an object created using `new`)
2. Avoid undefined behaviour (specifically: double `delete`:s)
**Note to reviewers:** Please let me know if I've missed any obvious `std::unique_ptr` candidates. Hopefully this PR should cover all the trivial cases.
Tree-SHA512: 9fbeb47b800ab8ff4e0be9f2a22ab63c23d5c613a0c6716d9183db8d22ddbbce592fb8384a8b7874bf7375c8161efb13ca2197ad6f24b75967148037f0f7b20c
dd9bb25 Fix code style in keystore.cpp/crypter.cpp (Jonas Schnelli)
208fda6 CCrypter: move relevant implementation out of the header (Jonas Schnelli)
3155fd2 CKeystore: move relevant implementation out of the header (Jonas Schnelli)
Pull request description:
Tree-SHA512: 4ce73cca5609199b74b8ff2614ee2b6af949545a1332a3a0135c6453c98665d2b0da171c1e390c9a2aec6b12b7fad931ec90084bb7c2defe243786bfc70daf60
725b79a [test] Verify node doesn't send headers that haven't been fully validated (Russell Yanofsky)
3788a84 Do not send (potentially) invalid headers in response to getheaders (Matt Corallo)
Pull request description:
Nowhere else in the protocol do we send headers which are for
blocks we have not fully validated except in response to getheaders
messages with a null locator. On my public node I have not seen any
such request (whether for an invalid block or not) in at least two
years of debug.log output, indicating that this should have minimal
impact.
Tree-SHA512: c1f6e0cdcdfb78ea577d555f9b3ceb1b4b60eff4f6cf313bfd8b576c9562d797bea73abc23f7011f249ae36dd539c715f3d20487ac03ace60e84e1b77c0c1e1a
6c4042a Assert that CWallet::SyncMetaData finds oldest transaction. (Eelis)
Pull request description:
Without this assert, the Clang static analyzer warns about subsequent dereferencing of copyFrom, because it can't be sure that it's not nullptr. See #9573.
Tree-SHA512: 83cbcb32c52c94fcfefbc90ec7de2011dacd6bdb0da35adc401b8d8dda6a86de2fa0403e2158592268c2cf15eef4f3d887d98c90f1031d4735d5f4bf9dbc1d23
5a5e4e9 [wallet] Remove CTransaction&() helper conversion operator from wallet implementation. (Karl-Johan Alm)
Pull request description:
The `CTransaction&()` operator in `CMerkleTx` makes conversion into `CTransaction`s transparent, but was marked as to-be-removed in favor of explicitly getting the `tx` ivar, presumably as the operator can lead to ambiguous behavior and makes the code harder to follow.
This PR removes the operator and adapts callers. This includes some cases of `static_cast<CTransaction>(wtx)` → `*wtx.tx`, which is definitely an improvement.
Tree-SHA512: 95856fec7194d6a79615ea1c322abfcd6bcedf6ffd0cfa89bbdd332ce13035fa52dd4b828d20df673072dde1be64b79c513529a6f422dd5f0961ce722a32d56a
b109a1c Remove redundant nullptr checks before deallocation (practicalswift)
Pull request description:
Rationale:
* `delete ptr` is a no-op if `ptr` is `nullptr`
Tree-SHA512: c98ce769125c4912186a8403cc08a59cfba85b7141af645c709b4c4eb90dd9cbdd6ed8076d50099d1e4ec2bf75917d1af6844082ec42bbb4d94d229a710e051c
7963335 Fix -disablewallet default value (João Barbosa)
b411c2a Improve -disablewallet parameter interaction (João Barbosa)
Pull request description:
The first commit logs a message for each configured wallet if `-disablewallet` is set:
```
bitcoind -printtoconsole -regtest -disablewallet -wallet=foo -wallet=bar
...
WalletParameterInteraction: parameter interaction: -disablewallet -> ignoring -wallet=foo
WalletParameterInteraction: parameter interaction: -disablewallet -> ignoring -wallet=bar
```
It also moves up the `-disablewallet` check which avoids the unnecessary `-wallet` soft set.
The second commit fixes the default value of `-disablewallet`, currently the value is correct, but it should use `DEFAULT_DISABLE_WALLET`.
The third commit can be dropped or squashed, just took the opportunity to fix the coding style there.
Tree-SHA512: bec13d2b2be5adf4680c77212020ed27dd05f15c4c73542d2005d91108bf704e2df1707ed2bec696e584ecd40eff7a63e25201fd70400222aa5a8da6aed6afeb
9db9d62 Refactor: make the read function simpler (gnuser)
Pull request description:
Tree-SHA512: 5a80cc1b841488323d421e6a40b245d149cab1988247aed6cc7468dcc042d3df15b6711f25e40ff16e03ac21de36adbaa1d8da61ccdb94f97c8b70c24a5eedc5
BOOST_CHECK_THROW merely checks that some std::runtime_error is
thrown, but not which one.
One example of how this could lead to a test passing when a developer
introduces a consensus bug: the test for the sigops limit assumes
that CreateNewBlock fails with bad-blk-sigops. However it can
also fail with bad-txns-vout-negative, e.g. if a naive developer lowers
BLOCKSUBSIDY to 1*COIN in the test.
BOOST_CHECK_EXCEPTION allows an additional predicate function. This
commit uses this for all exceptions that are checked for in
miner_tets.cpp:
* bad-blk-sigops
* bad-cb-multiple
* bad-txns-inputs-missingorspent
* block-validation-failed
An instance of the CheckRejectInvalid class (for a given validation string)
is passed to BOOST_CHECK_EXCEPTION.
c098c58 Wrap dumpwallet warning and note scripts aren't dumped (MeshCollider)
a38bfbc Add wallet backup text to import*, add* and dumpwallet RPCs (MeshCollider)
Pull request description:
Closes https://github.com/bitcoin/bitcoin/issues/11243
Adds "Requires a new wallet backup" text to `addwitnessaddress`, `importprivkey`, `importmulti`, `importaddress`, `importpubkey`, and `addmultisigaddress`. Also adds a warning to `dumpwallet` that backing up the seed alone is not sufficient to back up non-HD addresses
Tree-SHA512: 76d7cdca54d5b458acf479154620322391b889922525fddd6153f4164cfee393ad743757400cb8f6b1b30f24947df68ea9043b4e509f7df77a8fa05dda370933
5ce7cb9 [net] De-duplicate connection eviction logic (Thomas Snider)
Pull request description:
While reviewing the safeguards against deliberate node isolation on the network by malicious actors, I found a good de-duplication candidate.
I think this form is much more legible (the type of `cutoffs` notwithstanding). ReverseCompareNodeTimeConnected is not included in the list since the cutoff size is a function of the remaining number of nodes in the candidate eviction set.
Tree-SHA512: ed17999fa9250dcf8448329219324477117e4ecd2d41dedd72ad253e44630eef50b3232c420f1862ebbfb9b8c94efbba1a235b519e39ff5946865c7d69a75280
24a0bdd bench: prefer a steady clock if the resolution is no worse (Cory Fields)
c515d26 bench: switch to std::chrono for time measurements (Cory Fields)
Pull request description:
gettimeofday has portability issues, see for example #11558.
Regardless of large-scale clock refactors in the future, I think it's fine for bench to just use std::chrono itself.
Note that this may slightly improve bench accuracy and changes the display from tiny floats to nanosecond counts instead.
Tree-SHA512: 122355456d01ec6cfcf6867991715cf3a95eabbf5a4f2adc26a059b50382ffb318b7639cdd575197fc4ee5be8b967c0404f1f920d6f5bd4ddd0bd63b5e5c5632
std::chrono removes portability issues.
Rather than storing doubles, store the untouched time_points. Then
convert to nanoseconds for display. This allows for maximum precision, while
keeping results comparable between differing hardware/operating systems.
Also, display full nanosecond counts rather than sub-second floats.
d61845818 Have SegWit active by default (Pieter Wuille)
4bd89210a Unit tests for always-active versionbits. (Anthony Towns)
d07ee77ab Always-active versionbits support (Pieter Wuille)
18e071841 [consensus] Pin P2SH activation to block 173805 on mainnet (John Newbery)
526023aa7 Improve handling of BIP9Deployment limits (Anthony Towns)
Pull request description:
Most tests shouldn't have to deal with the now-historical SegWit activation transition (and other deployments, but SegWit is certainly the hardest one to accomodate).
This PR makes a versionbits starttime of -1 equal to "always active", and enables it by default for SegWit on regtest. Individual tests can override this by using the existing `-vbparams` option.
A few unit tests and functional tests are adapted to indeed override vbparams, as they specifically test the transition.
This is in preparation for wallet SegWit support, but I thought having earlier eyes on it would be useful.
Tree-SHA512: 3f07a7b41cf46476e6c7a5c43244e68c9f41d223482cedaa4c02a3a7b7cd0e90cbd06b84a1f3704620559636a2268f5767d4c52d09c1b354945737046f618fe5
76ea17c79 Add mutex requirement for AddToCompactExtraTransactions(…) (practicalswift)
4616c825a Use -Wthread-safety-analysis if available (+ -Werror=thread-safety-analysis if --enable-werror) (practicalswift)
7e319d639 Fix -Wthread-safety-analysis warnings. Change the sync.h primitives to std from boost. (Matt Corallo)
Pull request description:
* Add mutex requirement for `AddToCompactExtraTransactions(…)`.
* Use `-Wthread-safety-analysis` if available.
* Rebased on top of https://github.com/TheBlueMatt/bitcoin/commits/2017-08-test-10923 - now includes: Fix -Wthread-safety-analysis warnings. Change the sync.h primitives to std from boost.
Tree-SHA512: fb7365f85daa2741c276a1c899228181a8d46af51db7fbbdffceeaff121a3eb2ab74d7c8bf5e7de879bcc5042d00d24cb4649c312d51caba45a3f6135fd8b38f
cabff7588 rpc: Make logging RPC public (Wladimir J. van der Laan)
Pull request description:
This started out as a developer hack but now it's useful enough for general use. Unhide the call by moving it to `control` category. This makes it documented in `help`.
Tree-SHA512: f45fa378558b552d4e2a110bf85100b0eaaa6180bb5f62cb54a251f66026d4625b670c69d85c281eebbf4b56b80b65618c51a5a593b8f9d0a04b31e95adc91f4
a9b6ba0b7 Add missing cs_main locks when calling blockToJSON/blockheaderToJSON (practicalswift)
Pull request description:
`blockToJSON(...)` and `blockheaderToJSON(...)` read the variable `chainActive` which requires holding the mutex `cs_main`. So does `GetDifficulty(...)`.
Tree-SHA512: bfb94f5e3238accbf6a4daddde49d53f1891c38ae9b07e25b3098c485747159258f64bb66a50e147b32beac601de89d9d04ff717b6c4f1460d329c90a53d3333
3ab545d7f addrman: Add missing lock in Clear() (CAddrMan) (practicalswift)
Pull request description:
Add missing lock in `Clear()` (`CAddrMan`).
The variable `vRandom` is guarded by the mutex `cs`.
**Note to reviewers:** Does this look correct? Should the lock cover the entire scope of the method, or should it be limited to cover only `std::vector<int>().swap(vRandom);`?
Tree-SHA512: 8833f31beaed1728fa55b13ddf9e0b8e24e395931497329be2440ce1c5113ff02871707d40830260adabd30c4ea86088f5da5cf8a821150c0d820f50a2ce386a
ff35de8 [ui] Add toggle for unblinding password fields (Thomas Snider)
Pull request description:
Proposed change for adding the ability to toggle password visibility in the password dialog. This is similar to functionality in most password managers and is specifically added with the use case of password managers in mind - the password in that case is likely pasted twice into both the new password and confirm password fields.
If this is a welcome change, I am open to suggestions on rearranging the layout.
Tree-SHA512: 1823f356f8f941cc584c44de264433e9a573cb8a358efa300a412c4458b5564d8d193969be40859195cf9c8d6768eee895ee22440d51db4f09175f9b4e28bced
This started out as a developer hack but now it's useful
enough for general use. Unhide the call by moving it to `control` category.
This makes it documented in `help`.
Commit 1.
This code was written by @TheBlueMatt in the following branch:
* https://github.com/TheBlueMatt/bitcoin/commits/2017-08-test-10923
This commit message was written by me (@practicalswift) who also squashed
@TheBlueMatt's commits into one and tried to summarize the changes made.
Commit 2.
Remove boost include. Remove boost mentions in comments.
Move to AppInitServers. This doesn't have any effects on bitcoin behavior. It
was just strange to have this unrelated code in the middle or parameter
interaction.
6262915 Add unit test for stale tip checking (Suhas Daftuar)
83df257 Add CConnmanTest to mutate g_connman in tests (João Barbosa)
ac7b37c Connect to an extra outbound peer if our tip is stale (Suhas Daftuar)
db32a65 Track tip update time and last new block announcement from each peer (Suhas Daftuar)
2d4327d net: Allow connecting to extra outbound peers (Suhas Daftuar)
Pull request description:
This is an alternative approach to #11534. Rather than disconnect an outbound peer when our tip looks stale, instead try to connect to an additional outbound peer.
Periodically, check to see if we have more outbound peers than we target (ie if any extra peers are in use), and if so, disconnect the one that least recently announced a new block (breaking ties by choosing the newest peer that we connected to).
Tree-SHA512: 8f19e910e0bb36867f81783e020af225f356451899adfc7ade1895d6d3bd5afe51c83759610dfd10c62090c4fe404efa0283b2f63fde0bd7da898a1aaa7fb281
97932cd rpc: further constrain the libevent workaround (Cory Fields)
6b58360 rpc: work-around an upstream libevent bug (Cory Fields)
Pull request description:
A rare race condition may trigger while awaiting the body of a message.
This may fix some reported rpc hangs/crashes.
This work-around mimics what libevent does internally once a write has started, which is what usually happens, but not always due to the processing happening on a different thread: e7ff4ef2b4/http.c (L373)
Fixed upstream at: 5ff8eb2637
Tree-SHA512: b9fa97cae9da2a44101c5faf1e3be0b9cbdf722982d35541cf224be31430779c75e519c8ed18d06ab7487bfb1211069b28f22739f126d6c28ca62d3f73b79a52
720d9e8fa [Wallet] always show help-line of wallet encryption calls (Jonas Schnelli)
Pull request description:
We do currently show/hide the wallet encryption RPC calls from the help if the current wallet.
In case of an encrypted wallet, `encryptwallet` is hidden and `walletpassphrasechange`, `walletpassphrasechange` and `walletlock` do appear in the help.
This is no longer ideal in case of multiwallet due to the fact that one may want help infos in order to target a specific wallet.
IMO its preferable to have a static help screen (show everything always). The currently show/hidden calls do handle the possible invalid encryption-state fine.
Fixes#11588
Tree-SHA512: 513fecd15248a31361f5143685e8cdeb63dfd3fa7120828917e1db54d936dc3db60d48ce46efa5c3a563a48157fe962689879856eeeed53f904686b12aec204e
If our tip hasn't updated in a while, that may be because our peers are
not relaying blocks to us that we would consider valid. Allow connection
to an additional outbound peer in that circumstance.
Also, periodically check to see if we are exceeding our target number of
outbound peers, and disconnect the one which has least recently
announced a new block to us (choosing the newest such peer in the case
of tie).
A rare race condition may trigger while awaiting the body of a message, see
upsteam commit 5ff8eb26371c4dc56f384b2de35bea2d87814779 for details.
This may fix some reported rpc hangs/crashes.
5d465e396 Ensure backupwallet fails when attempting to backup to source file (Tomas van der Wansem)
Pull request description:
Previous behaviour was to destroy the wallet (to zero-length)
This fixes#11375
Tree-SHA512: bfd1738659b15e3f23b6bbdf55ec12269c62c820bf701daec19500b52bd5845bb5516733c6f76f36197eb155182a8a35dc239ad4de2ef1e59bbb0f124a455759
f3d4adf Make p2p-acceptablock not an extended test (Matt Corallo)
00dcda6 [qa] test that invalid blocks on an invalid chain get a disconnect (Matt Corallo)
015a525 Reject headers building on invalid chains by tracking invalidity (Matt Corallo)
932f118 Accept unrequested blocks with work equal to our tip (Matt Corallo)
3d9c70c Stop always storing blocks from whitelisted peers (Matt Corallo)
3b4ac43 Rewrite p2p-acceptblock in preparation for slight behavior changes (Matt Corallo)
Pull request description:
@sdaftuar pointed out that the version in #11487 was somewhat DoS-able as someone could feed you a valid chain that forked off the the last checkpoint block and force you to do lots of work just walking backwards across blocks for each new block they gave you. We came up with a few proposals but settled on the one implemented here as likely the simplest without obvious DoS issues. It uses our existing on-load mapBlockIndex walk to make sure everything that descends from an invalid block is marked as such, and then simply caches blocks which we attempted to connect but which were found to be invalid. To avoid DoS issues during IBD, this will need to depend on #11458.
Includes tests from #11487.
Tree-SHA512: 46aff8332908e122dae72ceb5fe8cd241902c2281a87f58a5fb486bf69d46458d84a096fdcb5f3e8e07fbcf7466232b10c429f4d67855425f11b38ac0bf612e1
b296bf1 Init: Remove redundant exit(EXIT_FAILURE) instances and replace with return false (donaloconnor)
Pull request description:
While reviewing the bitcoin code I noticed that there are a few exit(EXIT_FAILURE) at various places in the AppInit function.
This function returns to main() which will return/exit with EXIT_FAILURE so returning false instead of an explicit exit(EXIT_FAILURE) seems to be cleaner.
This PR attempts to make things a bit more consistent.
There is a subtle difference between exit() and return from main in that the exit() will not clean up any local vars but I don't think this makes a difference in this case. Using exit() might even lead to bugs in the future where the dtor of local objects are expected to be called.
Tree-SHA512: 7d104c3a752b4e7d7bc2382ef7e62543462988f1bbf13dd4077fbeff5399729b76c71a4352556f188b8d306604232477466f5bb827b58a6f3f6273f2370e1faa
659b206 Make listsinceblock refuse unknown block hash (Russell Yanofsky)
Pull request description:
Change suggested by @theuni who noticed listsinceblock would ignore invalid block hashes causing it to return a completely unfiltered list of transactions.
Tree-SHA512: 3c8fb160265780d1334e856e853ab48e2e18372b8f1fc71ae480c3f45317048cc1fee0055d5c58031981a91b9c2bdbeb8e49a889d04ecba61729ce8109f2ce3f
60b98f8 [Util] Update tinyformat.h (fanquake)
Pull request description:
Updates `tinyformat.h` to commit c42f/tinyformat@689695c upstream. Including:
8a2812d8485d9e05a34748e2e48789
@achow101 mentioned that since upgrading to Ubuntu 17.10 (GCC 7), tinyformat had been throwing lots of -Wimplicit-fallthrough warnings. However fallthrough warnings should have been silenced by #10489. cc @theuni.
The upstream commit to fix fallthrough warnings is in this PR https://github.com/c42f/tinyformat/pull/39.
The last time tinyformat.h was updated in this repo was in #8274.
Tree-SHA512: a51bd30544693550e08148daf5d244e3a3a410caff7897351eb9cd28f661dc85e193e045bb86068ee4006b2f89a7233b7573b8c50d93d2a9a15a11386fdcc605
This tracks the set of all known invalid-themselves blocks (ie
blocks which we attempted to connect but which were found to be
invalid). This is used to cheaply check if new headers build on an
invalid chain.
While we're at it we also resolve an edge-case in invalidateblock
on pruned nodes which results in them needing a reindex if they
fail to reorg.
This is a simple change that makes our accept requirements the
same as our request requirements, (ever so slightly) further
decoupling our consensus logic from our FindNextBlocksToDownload
logic in net_processing.
There is no reason to wish to store blocks on disk always just
because a peer is whitelisted. This appears to be a historical
quirk to avoid breaking things when the accept limits were added.
Nowhere else in the protocol do we send headers which are for
blocks we have not fully validated except in response to getheaders
messages with a null locator. On my public node I have not seen any
such request (whether for an invalid block or not) in at least two
years of debug.log output, indicating that this should have minimal
impact.
Reading the variable mapBlockIndex requires holding the mutex cs_main.
The new "Disconnect outbound peers relaying invalid headers" code
added in commit 37886d5e2f and merged
as part of #11568 two days ago did not lock cs_main prior to accessing
mapBlockIndex.
Warnings prior to this commit:
```
addrman.cpp:390:24: warning: comparison of integers of different signs: 'size_type' (aka 'unsigned long') and 'int' [-Wsign-compare]
if (vRandom.size() != nTried + nNew)
~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~
addrman.cpp:411:52: warning: comparison of integers of different signs: 'int' and 'size_type' (aka 'unsigned long') [-Wsign-compare]
if (info.nRandomPos < 0 || info.nRandomPos >= vRandom.size() || vRandom[info.nRandomPos] != n)
~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~
addrman.cpp:419:25: warning: comparison of integers of different signs: 'size_type' (aka 'unsigned long') and 'int' [-Wsign-compare]
if (setTried.size() != nTried)
~~~~~~~~~~~~~~~ ^ ~~~~~~
addrman.cpp:421:23: warning: comparison of integers of different signs: 'size_type' (aka 'unsigned long') and 'int' [-Wsign-compare]
if (mapNew.size() != nNew)
~~~~~~~~~~~~~ ^ ~~~~
4 warnings generated.
```
cc5c39d [Build] Add AM_OBJCXXFLAGS and QT_PIE_FLAGS to OBJCXXFLAGS to future-proof darwin targets (fanquake)
f8c6697 Fix automake warnings when running autogen.sh (Evan Klitzke)
Pull request description:
Adjusted @eklitzke's commit to completely remove GZIP_ENV.
Added a commit to address OBJCXXFLAGS.
Rebased on master.
Relevant info from @theuni & #11013 below.
--------
GZIP_ENV was indeed added for determinism, but gitian exports this as needed, so it's not really necessary. I'd rather just remove it.
The mm.o rule was added to support XCode 4.2's ancient version of automake. That's irrelevant now, so it makes sense to remove that too.
All darwin targets are PIE by default, so we don't technically need the flags, but I'd be more comfortable if we hooked up the OBJCXXFLAGS in case future ones are added.
--------
The second commit addresses the last point, but could probably use a better commit message.
These warnings are removed from autogen output:
```
Makefile.am:12: warning: user variable 'GZIP_ENV' defined here ...
/usr/local/Cellar/automake/1.15.1/share/automake-1.15/am/distdir.am: ... overrides Automake variable 'GZIP_ENV' defined here
src/Makefile.am: installing 'build-aux/depcomp'
src/Makefile.am:503: warning: user target '.mm.o' defined here ...
/usr/local/Cellar/automake/1.15.1/share/automake-1.15/am/depend2.am: ... overrides Automake target '.mm.o' defined here
```
Tree-SHA512: bd59df5f6d3aafe35d5e36925bfe61cc71e774583a0438d7dd946c9e7ecf6e59d42f90a58b8cfef0faa404c81050338ad4cefe721b4a949af881e73b6ab254d4
37886d5e2 Disconnect outbound peers relaying invalid headers (Suhas Daftuar)
4637f1852 moveonly: factor out headers processing into separate function (Suhas Daftuar)
Pull request description:
Alternate to #11446.
Disconnect outbound (non-manual) peers that serve us block headers that are already known to be invalid, but exempt compact block announcements from such disconnects.
We restrict disconnection to outbound peers that are using up an outbound connection slot, because we rely on those peers to give us connectivity to the honest network (our inbound peers are not chosen by us and hence could all be from an attacker/sybil). Maintaining connectivity to peers that serve us invalid headers is sometimes desirable, eg after a soft-fork, to protect unupgraded software from being partitioned off the honest network, so we prefer to only disconnect when necessary.
Compact block announcements are exempted from this logic to comply with BIP 152, which explicitly permits nodes to relay compact blocks before fully validating them.
Tree-SHA512: 3ea88e4ccc1184f292a85b17f800d401d2c3806fefc7ad5429d05d6872c53acfa5751e3df83ce6b9c0060ab289511ed70ae1323d140ccc5b12e3c8da6de49936
fd3a2f3 [tests] Add fuzz testing for BlockTransactions and BlockTransactionsRequest (practicalswift)
Pull request description:
The `BlockTransactions` deserialization code is reachable with tainted data via `ProcessMessage(…, "BLOCKTXN", vRecv [tainted], …)`.
The same thing applies to `BlockTransactionsRequest` which is reachable via `"GETBLOCKTXN"`.
Tree-SHA512: 64560ea344bc6145b940472f99866b808725745b060dedfb315be400bd94e55399f50b982149645bd7af7ed9935fd28751d7daf0d3f94a8e2ed3bc52e3325ffb
e065249 Add unit test for outbound peer eviction (Suhas Daftuar)
5a6d00c Permit disconnection of outbound peers on bad/slow chains (Suhas Daftuar)
c60fd71 Disconnecting from bad outbound peers in IBD (Suhas Daftuar)
Pull request description:
The first commit will disconnect an outbound peer that serves us a headers chain with insufficient work while we're in IBD.
The second commit introduces a way to disconnect outbound peers whose chains fall out of sync with ours:
For a given outbound peer, we check whether their best known block (which is known from the blocks they announce to us) has at least as much work as our tip. If it doesn't, we set a 20 minute timeout, and if we still haven't heard about a block with as much work as our tip had when we set the timeout, then we send a single getheaders message, and wait 2 more minutes. If after two minutes their best known block has insufficient work, we disconnect that peer.
We protect 4 of our outbound peers (who provide some "good" headers chains, ie a chain with at least as much work as our tip at some point) from being subject to this logic, to prevent excessive network topology changes as a result of this algorithm, while still ensuring that we have a reasonable number of nodes not known to be on bogus chains.
We also don't require our peers to be on the same chain as us, to prevent accidental partitioning of the network in the event of a chain split. Note that if our peers are ever on a more work chain than our tip, then we will download and validate it, and then either reorg to it, or learn of a consensus incompatibility with that peer and disconnect. This PR is designed to protect against peers that are on a less work chain which we may never try to download and validate.
Tree-SHA512: 2e0169a1dd8a7fb95980573ac4a201924bffdd724c19afcab5efcef076fdbe1f2cec7dc5f5d7e0a6327216f56d3828884f73642e00c8534b56ec2bb4c854a656
Currently we have no rotation of outbound peers. If an outbound peer
stops serving us blocks, or is on a consensus-incompatible chain with
less work than our tip (but otherwise valid headers), then we will never
disconnect that peer, even though that peer is using one of our 8
outbound connection slots. Because we rely on our outbound peers to
find an honest node in order to reach consensus, allowing an
incompatible peer to occupy one of those slots is undesirable,
particularly if it is possible for all such slots to be occupied by such
peers.
Protect against this by always checking to see if a peer's best known
block has less work than our tip, and if so, set a 20 minute timeout --
if the peer is still not known to have caught up to a chain with as much
work as ours after 20 minutes, then send a single getheaders message,
wait 2 more minutes, and if a better header hasn't been received by then,
disconnect that peer.
Note:
- we do not require that our peer sync to the same tip as ours, just an
equal or greater work tip. (Doing otherwise would risk partitioning the
network in the event of a chain split, and is also unnecessary.)
- we pick 4 of our outbound peers and do not subject them to this logic,
to be more conservative. We don't wish to permit temporary network
issues (or an attacker) to excessively disrupt network topology.
Change suggested by Cory Fields <cory-nospam-@coryfields.com> who noticed
listsinceblock would ignore invalid block hashes causing it to return a
completely unfiltered list of transactions.
6b1891e2c Add Sent and Received information to the debug menu peer list (Aaron Golliver)
8e4aa35ff move human-readable byte formatting to guiutil (Aaron Golliver)
Pull request description:
Makes the peer list display how much you've uploaded/downloaded from each peer.
Here's a screenshot ~~[outdated](https://i.imgur.com/MhPbItp.png)~~, [current](https://i.imgur.com/K1htrVv.png) of how it looks. You can now sort to see who are the peers you've uploaded the most too.
I also moved `RPCConsole::FormatBytes` to `guiutil::formatBytes` so I could use it in the peerlist
Tree-SHA512: 8845ef406e4cbe7f981879a78c063542ce90f50f45c8fa3514ba3e6e1164b4c70bb2093c4e1cac268aef0328b7b63545bc1dfa435c227f28fdb4cb0a596800f5
A peer could try to waste our resources by sending us unrequested blocks with
low work, eg to fill up our disk. Since
e2652002b6 we no longer request blocks until we
know we're on a chain with more than nMinimumChainWork (our anti-DoS
threshold), but we would still process unrequested blocks that had more work
than our tip. This commit fixes that behavior.
7a5f930 Avoid slow transaction search with txindex enabled (João Barbosa)
Pull request description:
This is an alternative to #11507 where a slow search is not attempted (in any case) if `txindex` is enabled.
Tree-SHA512: e680621781a9241c0513ddd79d23b0b42f3ccec8a63ed1c926b35c43321c81c39a1028770397dd5070501dcf644d897026a2bd68a161a4b435f19227c1bbca48
Make sure wallet databases have unique fileids. If they don't, throw an error.
BDB caches do not work properly when more than one open database has the same
fileid, because values written to one database may show up in reads to other
databases.
Bitcoin will never create different databases with the same fileid, but users
can create them by manually copying database files.
BDB caching bug was reported by Chris Moore <dooglus@gmail.com>
https://github.com/bitcoin/bitcoin/issues/11429Fixes#11429
0aacfa4 Remove accidental stray semicolon (practicalswift)
68feb49 Use nullptr instead of NULL (practicalswift)
c6b07fd Fix a vs. an typo (practicalswift)
Pull request description:
Minor cleanups:
* Typo: Fix a vs. an typo
* Typo: Remove accidental stray semicolon (only remaining instance in repo)
* Correctness/consistency: Use `nullptr` instead of `NULL` (only remaining instance in repo)
Tree-SHA512: 47142e557da9d3fa0b532c46edeb7f356a1f6dc5973e60b0e496badff3581ff696eade542d49da777ac7f2e895129cc8487ccdb1984ff828434fa86f9a56dad0
f4c4e38 [trivial] Make namespace explicit for is_regular_file (John Newbery)
Pull request description:
is_regular_file resolves using argument dependent lookup. Make the
namespace explicit so it's obvious where the function is defined.
For those not familiar with argument dependent lookups:
- http://en.cppreference.com/w/cpp/language/adl
- https://en.wikipedia.org/wiki/Argument-dependent_name_lookup
Thanks to C++ guru @ryanofsky for pointing this out to me.
Tree-SHA512: 919f1818081a8f90c5751181f87e13b06d90f8aec0ab873100434e55c85cca6e0e288ecc7f135e19e9b5dba7952e96b6393864b7840e20b69dd40e92a157928b
7104de8 [wallet] Fix leak in CDB constructor (João Barbosa)
Pull request description:
First commit fixes a minor leak.
Second commit improves the constructor in the failure cases.
Tree-SHA512: 5165413d60ed9fc28203c9fe128adbba03a9ea9e9aa3734d9ea2522dafd815ba0fb8b90fd0809dbc06eb3ad360e7764de01dadf653ade3350fe86f6b8f04bc90
207408b Fix crash via division by zero assertion (Jonas Schnelli)
Pull request description:
Replaces the newly added `assert` for a devision by zero protection by a control structure. Floating point division by zero is defined by the floating point standard and results in +inf or -inf.
Introduced in #11133
Reported by @mzhou, fixes#11501
Tree-SHA512: ac9b4efa3ba52a2aa246fb11170128c4aaf829fd491b649524c85069c6ed33ae612e761809aea9d9a44bdea29a417b3f3a558226495094b5070a42a56b2ac77e
258d33b41 [mempool] Mark unaccepted txs present in mempool as 'already there'. (Karl-Johan Alm)
Pull request description:
I was investigating the reasons for failed imports in mempool and noticed that `LoadMempool()` and `pwallet->postInitProcess()` (for all wallets) are executed concurrently. The wallet will end up importing transactions that `LoadMempool()` later tries to import; the latter will fail due to the tx already being in the mempool.
This PR changes the log message, adding an additional "already there" entry. For transactions not accepted into mempool, a check if they are in the mempool is done first, and if found, they are counted as 'already there', otherwise counted as 'failed'.
Also slight rewording for consistency (successes, failed, expired, ... -> succeeded, failed, expired).
Tree-SHA512: 1a6134a25260917f2768365e0dfd8b278fe3f8287cab38bb028b7de3d517718a2d37696186dc7a23ceab338cc755fbbe7d45358ee94e573610fddd2a0620d6e5
43f76f6ac Add missing comma from rescanblockchain (MeshCollider)
Pull request description:
#7061 forgot a comma in the HelpExampleRpc() for the rescanblockchain RPC, giving an incorrect example command output:
> curl --user myusername --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "rescanblockchain", "params": [100000 120000] }' -H 'content-type: text/plain;' http://127.0.0.1:8332/
Was just missed during nit-fixing. This is a trivial fix to add that comma in.
Tree-SHA512: b808f32674af585a1ddb78b25621dff0387dbad79c97d65ff61d8a9a12a94e4b8ecf03eda3f281fe439bddb6c0703c39104dbb279f1718949abd930faaa9042f
fe862c5ad Avoid division by zero in the case of a corrupt estimates file (practicalswift)
Pull request description:
Avoid division by zero in the case of a corrupt estimates file.
Tree-SHA512: 285cb0d566f239d260880026a930a7412d86e31ea3819d5371a36364a241dc76164e68c1da6da8369345fa6037ca0abc5ab82d245058c085d5f1fd50111fba48
Now using a std::unique_ptr, the Db instance is correctly released
when CDB initialization fails.
The internal CDB state and mapFileUseCount are only mutated when
the CDB initialization succeeds.
Note that UpdatedBlockTip is also used in net_processing to
announce new blocks to peers. As this may need additional review,
this change is included in its own commit.
This runs Block{Connected,Disconnected}, SetBestChain, Inventory,
and TransactionAddedToMempool on the background scheduler thread.
Of those, only BlockConnected is used outside of Wallet/ZMQ, and
is used only for orphan transaction removal in net_processing,
something which does not need to be synchronous with anything
else.
This partially reverts #9583, re-enabling some of the gains from
#7946. This does not, however, re-enable the gains achieved by
repeatedly releasing cs_main between each transaction processed.
This avoid calling out to mempool state during coin selection,
balance calculation, etc. In the next commit we ensure all wallet
callbacks from CValidationInterface happen in the same queue,
serialized with each other. This helps to avoid re-introducing one
of the issues described in #9584 [1] by further disconnecting
wallet from current chain/mempool state.
Thanks to @morcos for the suggestion to do this.
Note that there are several race conditions introduced here:
* If a user calls sendrawtransaction from RPC, adding a
transaction which is "trusted" (ie from them) and pays them
change, it may not be immediately used by coin selection until
the notification callbacks finish running. No such race is
introduced in normal transaction-sending RPCs as this case is
explicitly handled.
* Until Block{Connected,Disconnected} and
TransactionAddedToMempool calls also run in the CSceduler
background thread, there is a race where
TransactionAddedToMempool might be called after a
Block{Connected,Disconnected} call happens.
* Wallet will write a new best chain from the SetBestChain
callback prior to having processed the transaction from that
block.
[1] "you could go to select coins, need to use 0-conf change, but
such 0-conf change may have been included in a block who's
callbacks have not yet been processed - resulting in thinking they
are not in mempool and, thus, not selectable."
This prevents the wallet-RPCs-return-stale-info issue from being
re-introduced when new-block callbacks no longer happen in the
block-connection cs_main lock
This is both good practice (we want to move all such callbacks
into a background thread eventually) and prevents a lock inversion
when we go to use this in wallet (mempool.cs->cs_wallet and
cs_wallet->mempool.cs would otherwise both be used).
This is currently unused, but will by used by wallet to cache when
transactions are in the mempool, obviating the need for calls to
mempool from CWalletTx::InMempool()
15f5d3b17 Switch DNSSeed-needed metric to any-automatic-nodes, not services (Matt Corallo)
5ee88b4bd Clarify docs for requirements/handling of addnode/connect nodes (Matt Corallo)
57edc0b0c Rename fAddnode to a more-descriptive "manual_connection" (Matt Corallo)
44407100f Replace relevant services logic with a function suite. (Matt Corallo)
Pull request description:
This was mostly written as a way to clean things up so that the NETWORK_LIMITED PR (#10387) can be simplified a ton, but its also a nice standalone cleanup that will also require a bit of review because it tweaks a lot of stuff across net. The new functions are fine in protocol.h right now since they're straight-forward, but after NETWORK_LIMITED will really want to move elsewhere after @theuni moves the nServices-based selection to addrman from connman.
Adds HasAllRelevantServices and GetRelevantServices, which check
for NETWORK|WITNESS.
This changes the following:
* Removes nRelevantServices from CConnman, disconnecting it a bit
more from protocol-level logic.
* Replaces our sometimes-connect-to-!WITNESS-nodes logic with
simply always requiring WITNESS|NETWORK for outbound non-feeler
connections (feelers still only require NETWORK).
* This has the added benefit of removing nServicesExpected from
CNode - instead letting net_processing's VERSION message
handling simply check HasAllRelevantServices.
* This implies we believe WITNESS nodes to continue to be a
significant majority of nodes on the network, but also because
we cannot sync properly from !WITNESS nodes, it is strange to
continue using our valuable outbound slots on them.
* In order to prevent this change from preventing connection to
-connect= nodes which have !WITNESS, -connect nodes are now
given the "addnode" flag. This also allows outbound connections
to !NODE_NETWORK nodes for -connect nodes (which was already true
of addnodes).
* Has the (somewhat unintended) consequence of changing one of the
eviction metrics from the same
sometimes-connect-to-!WITNESS-nodes metric to requiring
HasRelevantServices.
This should make NODE_NETWORK_LIMITED much simpler to implement.
Tree-SHA512: 90606896c86cc5da14c77843b16674a6a012065e7b583d76d1c47a18215358abefcbab44ff4fab3fadcd39aa9a42d4740c6dc8874a58033bdfc8ad3fb5c649fc
7a91ceb5e [QA] Add RPC based rescan test (Jonas Schnelli)
c77170fbd [Wallet] add rescanblockchain <start_height> <stop_height> RPC command (Jonas Schnelli)
Pull request description:
A RPC rescan command is much more flexible for the following reasons:
* You can define the start and end-height
* It can be called during runtime
* It can work in multiwallet environment
Tree-SHA512: df67177bad6ad1d08e5a621f095564524fa3eb87204c2048ef7265e77013e4b1b29f991708f807002329a507a254f35e79a4ed28a2d18d4b3da7a75d57ce0ea5
Adds HasAllRelevantServices and GetRelevantServices, which check
for NETWORK|WITNESS.
This changes the following:
* Removes nRelevantServices from CConnman, disconnecting it a bit
more from protocol-level logic.
* Replaces our sometimes-connect-to-!WITNESS-nodes logic with
simply always requiring WITNESS|NETWORK for outbound non-feeler
connections (feelers still only require NETWORK).
* This has the added benefit of removing nServicesExpected from
CNode - instead letting net_processing's VERSION message
handling simply check HasAllRelevantServices.
* This implies we believe WITNESS nodes to continue to be a
significant majority of nodes on the network, but also because
we cannot sync properly from !WITNESS nodes, it is strange to
continue using our valuable outbound slots on them.
* In order to prevent this change from preventing connection to
-connect= nodes which have !WITNESS, -connect nodes are now
given the "addnode" flag. This also allows outbound connections
to !NODE_NETWORK nodes for -connect nodes (which was already true
of addnodes).
* Has the (somewhat unintended) consequence of changing one of the
eviction metrics from the same
sometimes-connect-to-!WITNESS-nodes metric to requiring
HasRelevantServices.
This should make NODE_NETWORK_LIMITED much simpler to implement.
8c2f4b888 Expose more parallelism with relaxed atomics (suggested in #9938). Fix a test to check the exclusive or of two properties rather than just or. (Jeremy Rubin)
Pull request description:
This PR is in response to #10026 and some feedback on #9938.
~Locally, all the checkqueue tests ran 3.2X faster on my machine. The worst offender, `test_CheckQueue_Correct_Random` ran 3.4X faster.~
1. ~Removes `GetRand()` and replaces it with a single deterministic FastRandomContext instance.~ #10321 replicated this
1. Exposes more parallelism with relaxed atomics, increasing chance of catching a bug. This does not change performance on my machine.
1. Makes one test case more restrictive (xor instead of or, see #9938).
Tree-SHA512: a59dfbee0273c713525a130dfedc1c7ff26f50c2aaca1e94ef5d759b1d6ea6338ffbd97f863b9f6209750d8a788a15fa8ae1bf26774ed2473c520811337e6b00
4526d21 Add test for multiwallet batch RPC calls (Russell Yanofsky)
74182f2 Add missing batch rpc calls to python coverage logs (Russell Yanofsky)
505530c Add missing multiwallet rpc calls to python coverage logs (Russell Yanofsky)
9f67646 Make AuthServiceProxy._batch method usable (Russell Yanofsky)
e02007a Limit AuthServiceProxyWrapper.__getattr__ wrapping (Russell Yanofsky)
edafc71 Fix uninitialized URI in batch RPC requests (Russell Yanofsky)
Pull request description:
This fixes "Wallet file not specified" errors when making batch wallet RPC calls with more than one wallet loaded. This issue was reported by @NicolasDorier in https://github.com/bitcoin/bitcoin/issues/11257
Request URI is not used for anything except multiwallet request dispatching, so this change has no other effect.
Tree-SHA512: b3907af48a6323f864bb045ee2fa56b604188b835025ef82ba3d81673244c04228d796323cec208a676e7cd578a95ec7c7ba1e84d0158b93844d5dda8f6589b9
bfebc0b Remove dead store in ecdsa_signature_parse_der_lax. (Eelis)
Pull request description:
This was one of the issues found by Clang's static analyzer (#9573).
Tree-SHA512: 3674c56ccdc750bfe42e41d56b1f2058b6921c5354f7e757f6af10a759c5be75e23d6c7932a4524b9a24da308f426803b11deffbfcf09a5898a4204ee61d16d2
55509f1 Document assumptions that are being made to avoid division by zero (practicalswift)
Pull request description:
Document assumptions (via `assert(…)`:s) that are being made to avoid division by zero.
Rationale:
* Make it clear to human reviewers and non-human static analyzers that what might look like potential division by zero cases are written the way they are intentionally (these cases are currently flagged by various static analyzers).
Tree-SHA512: bbb67b1370afd8f39bda35f9e3a20f4325f017d94cc1bfac3b0d36c9f34c2d95a9efe11efe44db29fb4aadd25d8276d8f0e03c8806ac64f0d21d821912e13b8e
619bb05 Squashed 'src/univalue/' changes from 16a1f7f6e..fe805ea74 (MarcoFalke)
Pull request description:
The subtree-merge commit also fixes the whitespace for failing tests, such that bisect doesn't break.
Finally, the bump also includes the changes that accidentally modified our subtree, such that the subtree check should work fine now:
```sh
./contrib/devtools/git-subtree-check.sh src/univalue
Tree-SHA512: 3009d1e52b6f41ef89ecc8a000649f08e44395538703f294995a6e913e3fbfb7813d6bd31fdb4acb6127fd4af99c095bf980a12f1f026bb27cacc66e1487cd1e
eff4bd8 [test] P2P functional test for certain fingerprinting protections (Jim Posen)
a2be3b6 [net] Ignore getheaders requests for very old side blocks (Jim Posen)
Pull request description:
Sending a getheaders message with an empty locator and a stop hash is a request for a single header by hash. The node will respond with headers for blocks not in the main chain as well as those in the main chain. To avoid fingerprinting, the node should, however, ignore requests for headers on side branches that are too old. This replicates the logic that currently exists for `getdata` requests for blocks.
Tree-SHA512: e04ef61e2b73945be6ec5977b3c5680b6dc3667246f8bfb67afae1ecaba900c0b49b18bbbb74869f7a37ef70b6ed99e78ebe0ea0a1569369fad9e447d720ffc4
4e955c5 Near-Bugfix: Reestablish consensus check removed in 8d7849b (Jorge Timón)
3e8c916 Introduce CheckInputsAndUpdateCoins static wrapper in txmempool.cpp (Jorge Timón)
832e074 Optimization: Minimize the number of times it is checked that no money is created (Jorge Timón)
3f0ee3e Proper indentation for CheckTxInputs and other minor fixes (Jorge Timón)
Pull request description:
...is created by individual transactions to 2 places (but call only once in each):
- ConnectBlock ( before calculated fees per txs twice )
- AcceptToMemoryPoolWorker ( before called CheckTxInputs 4 times and calculated
fees per tx one extra time )
Also call tx.GetValueOut() only once per call of CheckTxInputs (instead of 2)
For more motivation:
~~https://github.com/bitcoin/bitcoin/blob/master/src/main.cpp#L1493~~https://github.com/jtimon/bitcoin/compare/0.13-consensus-inputs...jtimon:0.13-consensus-inputs-comments
EDIT: partially replaces #6445
Near-Bugfix as pointed out in https://github.com/bitcoin/bitcoin/pull/8498#discussion_r124346132
Tree-SHA512: c71188e7c7c2425c9170ed7b803896755a92fd22f43b136eedaa6e554106696f0b10271d0ef0d0127c1eaafbc31d12eb19143df4f1b6882feecedf6ef05ea346
aa57590d7 Update importprivkey named args documentation (Dusty Williams)
Pull request description:
Addresses issue #11462 by updating the documentation for the importprivkey arguments to the correct names, and updates the functional test importprunedfunds.py to use named arguments when calling importprivkey.
Tree-SHA512: 64e14bf89c8c6eec9c37f6ec0c9fc0012fdb035d9ec32cd652110c75abaa922ec5c7523d6ec5098c8a7b42124159b5e330e070974eb79b8b92816f8d61074523
c6a995e Improve readability of DecodeBase58Check(...) (practicalswift)
Pull request description:
Use the more readable form ...
```c++
&vchRet[vchRet.size() - 4]
```
... instead of ...
```c++
&v.end()[-n]
```
Has the added benefit of eliminating a spurious static analyzer warning about improper use of negative values.
Tree-SHA512: 5895310c189e9322082c28f34342ff9a6c238e2cae3f204521111c8a7981bc555af60b42de082c91608c1125dfc244a65c4faf929249a067a51435e2be74cb39
ce2418f [gui] reset addrProxy/addrSeparateProxyTor if colon char missing (Cristian Mircea Messel)
Pull request description:
If addrProxy or addrSeparateProxyTor do not have a colon in the string
somewhere in the QSettings storage, then attempting to open the options
dialog will cause the entire program to crash.
Fixes#11209
Tree-SHA512: 2d9e6987cf05af3f41033290b61d00920f7fe4a65bea7efd96ed417a8ca7866d248f091e09947cc8aad3a6a4aa8b7777211cfff7f379a62188be50df2c46d4b2
Fixes#11462. Updated documentation for importprivkey function to use the correct name for the first argument.
Also updates a call to importprivkey to use named args in functional test.
0da49b5 Skip precompute sighash for transactions without witness (Johnson Lau)
Pull request description:
This saves unnecessary hash caching for non-segwit transactions, but I am not sure if the difference is noticeable.
Tree-SHA512: 5cd733a729a52a45781510b3572b26e76837a94155caa14311c6d23a27a12e9613ff278dfc2592e21f640202782f22c5ad00fca85c4de5efacaa617c48ccb08d
c626dcb50 Make fUseCrypto atomic (MeshCollider)
731065b11 Consistent parameter names in txdb.h (MeshCollider)
35aeabec6 Make fReindex atomic to avoid race (MeshCollider)
58d91af59 Fix race for mapBlockIndex in AppInitMain (MeshCollider)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/11106
Also makes fReindex atomic as suggested in @TheBlueMatt comment below, and makes fUseCrypto atomic as suggested in 10916
d291e7635b just renames the parameters in the txdb header file to make them consistent with those used in the cpp file, noticed it when looking for uses of fReindex
Tree-SHA512: b378aa7289fd505b76565cd4d48dcdc04ac5540283ea1c80442170b0f13cb6df771b1a94dd54b7fec3478a7b4668c224ec9d795f16937782724c5d020edd3a42
f35d033 build: Make "make clean" remove all files created when running "make check" (practicalswift)
Pull request description:
Make `make clean` remove all files created when running `make check`. More specifically: remove also `obj/build.h` and `bench/data/block413567.raw.h` as part of `make clean`.
Before this patch:
```bash
$ git clone https://github.com/bitcoin/bitcoin.git
$ cd bitcoin/
$ ./autogen.sh
$ ./configure
$ cp -r ../bitcoin ../bitcoin-before-make
$ make check
$ make clean
$ cp -r ../bitcoin ../bitcoin-after-make-and-make-clean
$ cd ..
$ diff -rq bitcoin-before-make/ bitcoin-after-make-and-make-clean/ | grep -E "^Only in bitcoin-after-make-and-make-clean/" | grep -v dirstamp
Only in bitcoin-after-make-and-make-clean/src/bench/data: block413567.raw.h
Only in bitcoin-after-make-and-make-clean/src/obj: build.h
$
```
After this patch:
```bash
$ git clone https://github.com/bitcoin/bitcoin.git
$ cd bitcoin/
$ ./autogen.sh
$ ./configure
$ cp -r ../bitcoin ../bitcoin-before-make
$ make check
$ make clean
$ cp -r ../bitcoin ../bitcoin-after-make-and-make-clean
$ cd ..
$ diff -rq bitcoin-before-make/ bitcoin-after-make-and-make-clean/ | grep -E "^Only in bitcoin-after-make-and-make-clean/" | grep -v dirstamp
$
```
Tree-SHA512: 953e8423485ffd415f0ade6abe0b4c407454f67c332140ef019d89db425bb4a831327b3f634b8d69b17325dcfc6e3ac72dc2ba1ce5462158eecc3c05645e93ba
96c2ce9 Fix validationinterface build on super old boost/clang (Matt Corallo)
Pull request description:
This should fix all the non-dependancy issues for termux builds.
See Github issue #11388.
Tree-SHA512: ff0918fa76a6d4639a6c5b5e045ef053ce1d93eb0b1fe94c5fdfcc4d5e54e1118eeb09676ffd8f6d1acd630a63656944c6274ee3dbd7c09b7129c30647dbf4f9
0cd9273 rpc: Prevent `dumpwallet` from overwriting files (Wladimir J. van der Laan)
Pull request description:
Prevent arbitrary files from being overwritten by `dumpwallet`. There have been reports that users have overwritten wallet files this way. It may also avoid other security issues.
Fixes#9934. Adds mention to release notes and adds a test.
Tree-SHA512: 268c98636d40924d793b55a685a0b419bafd834ad369edaec08227ebe26ed4470ddea73008d1c4beb10ea445db1b0bb8e3546ba8fc2d1a411ebd4a0de8ce9120
More specifically: remove also obj/build.h and bench/data/block413567.raw.h.
Before this patch:
```
$ diff -rq bitcoin-before-make/ bitcoin-after-make-and-make-clean/ | grep -E "^Only in bitcoin-after-make-and-make-clean/" | grep -v dirstamp
Only in bitcoin-after-make-and-make-clean/src/bench/data: block413567.raw.h
Only in bitcoin-after-make-and-make-clean/src/obj: build.h
$
```
After this patch:
```
$ diff -rq bitcoin-before-make/ bitcoin-after-make-and-make-clean/ | grep -E "^Only in bitcoin-after-make-and-make-clean/" | grep -v dirstamp
$
```
cffe85f Skip sys::system(...) call in case of empty command (practicalswift)
6fb8f5f Check that -blocknotify command is non-empty before executing (practicalswift)
Pull request description:
Check that `-blocknotify` command is non-empty before executing.
To make the `BlockNotifyCallback(...)` (`-blocknotify`) behaviour consistent with that of:
* `AlertNotify(...)` (`-alertnotify`)
* `AddToWallet(...)` (`-walletnotify`)
Tree-SHA512: 18272166793a5a8b9cc2a727bfbcea53d38c329a55bc975c02db601329d608a61c20e026ce4b616193ecd3810dca4d3e2cb3bf773898a51872008a8dba96763e
6643b80 Add state message print to AcceptBlock failure message. (Matt Corallo)
Pull request description:
This should make it easier to debug issues where the CheckBlock at
the top of ProcessNewBlock fails (which does not print, in contrast
to AcceptBlock, which always prints).
This was motivated by #11371 which appears to be exactly such a case, and is not debuggable from the information provided. Not sure how much this would have helped in that case, but it is kinda weird that we can reject a block without ever printing why.
Tree-SHA512: 7a1c2c76080b810212da885c38e091609e409c62918cc326bb36a1096e09b2ae7e26fd4bdaefd79863d2894e2823e463005700a524940f177a59ef09f589b2f1
fd86f998f Squashed 'src/secp256k1/' changes from 84973d393..0b7024185 (MarcoFalke)
Pull request description:
The subtree should now match upstream again. Check with:
```sh
./contrib/devtools/git-subtree-check.sh src/secp256k1
```
The changes are only documentation/refactoring related.
Tree-SHA512: 43e8a95bcbfefef9e19ec38a92d2d57fdd4a16ddf726e036d36a0d806eb6f35b45b40ee69f980430e107895ec8725b5de4e36456b026214675e0b19630bb6fe9
If addrProxy or addrSeparateProxyTor do not have a colon in the string
somewhere in the QSettings storage, then attempting to open the options
dialog will cause the entire program to crash.
fafff1220 qa: Restore bitcoin-util-test py2 compatibility (MarcoFalke)
Pull request description:
Currently `./configure && make check` will look for python3, then python2. As long as we support python2 (and use it as fallback), `make check` should run fine with both python2 and python3.
Fixes#11352 by @Zenitur
Tree-SHA512: a335ebdd224328d6f924fe52a9b97de196926476c9ee04ce3280743ea93bcae355eb2d5d4bed4050c01b2e904105595eac7db2eaa9307207581caa0a98ebcc0b
This fixes "Wallet file not specified" errors when making batch wallet RPC
calls with more than one wallet loaded. This issue was reported by
NicolasDorier <nicolas.dorier@gmail.com>
https://github.com/bitcoin/bitcoin/issues/11257
Request URI is not used for anything except multiwallet request dispatching, so
this change has no other effects.
Fixes#11257
Sending a getheaders message with an empty locator and a stop hash
is a request for a single header by hash. The node will respond with
headers for blocks not in the main chain as well as those in the main
chain. To avoid fingerprinting, the node should, however, ignore
requests for headers on side branches that are too old.
46ce223d1 Add tests for CMerkleBlock usage with txids specified (James O'Beirne)
5ab586f90 Consolidate CMerkleBlock constructor into a single method (James O'Beirne)
Pull request description:
What started as a simple task to add test coverage ended up giving way to a light refactoring. This consolidates the mostly-identical `CMerkleBlock` constructors into one (using C++11 constructor delegation) and adds coverage for the by-txids construction case.
### Before
### After
Tree-SHA512: eed84ed3e8bfc43473077b575c8252759a857e37275e4b36ca7cc2c17a65895e5f494bfd9d4aeab09fc6e98fc6a9c641ac7ecc0ddbeefe01a9e4308e7909e529
634e38ca7 [Tests] Add Qt GUI tests to Overview and ReceiveCoin Page (Anditto Heristyo)
Pull request description:
I've added some Qt wallet tests based on #9974, namely the input & buttons on ReceiveCoin.
Tree-SHA512: f4223827145e35c2abee83a6ca777498bebcff3825fece10fbb1dbfd1f6bb017d3f2c0521662854b4407cdeee9c6a527269ab9cc28e0dc85c11b668155fcd195
07704c1 Add some tests for getchaintxstats (Akio Nakamura)
3336676 Fix getchaintxstats() (Akio Nakamura)
Pull request description:
1. calculate nblocks more adaptive.
-> set default nblocks to min (blocks for 1 month, target block's height - 1)
-> before PR: if not specify nblocks-parameter, illegal parameter error will happen when target block height is below nblocks.
2. correct error message.
-> nblocks accepts [1 .. block's height -1] . so add a word "-1".
3. add check 0-divide.
-> if nTimeDiff = 0 then use UniValue(UniValue::VNULL) and returns {... "txrate": null} .
-> before PR: if nTimeDiff = 0 then returns {... "txrate":} and bitcoin-cli cannot handle the response.
Tree-SHA512: e1962ce7bb05a5bc7dec03eb04a8e7578f50fdb68927fcfc0a2232905ef4d679293eee148ebe0866682d209a8c458d21fbe71715e7311adb81f37089aae1ed93
5ddf560 script: Change SignatureHash input index check to an assert. (Jim Posen)
Pull request description:
In the SignatureHash function, the input index must refer to a valid index. This is not enforced equally in the segwit/non-segwit branches and should be an assertion rather than returning a error hash.
Tree-SHA512: a775fc9e9bd9835c0ab36368aa45ab3d53e38f31fd4d2b8684a77ee6028c854c363df038681a59358b30138957573ad63b71d4a722c16e0830fb4fa72669ef39
3a4401a [Qt] Terminate string *pszExePath after readlink and without using memset (practicalswift)
Pull request description:
Terminate string `*pszExePath` after `readlink` and before passing to operator `<<`.
* `ssize_t readlink(const char *pathname, char *buf, size_t bufsiz)` does not append a null byte to `buf`.
* Operator `<<` expects a null-terminated string.
Tree-SHA512: fc18844bb23059fead8db0cb9b4b4ba6188f58e3f19ab4719c2737cc5dd6df23ae7d4804ef2820d39b334204a48ee3de1d202c272bcd156e60761af2fcb9349d
92848e5 Remove unused fTry from push_lock (João Barbosa)
Pull request description:
After #9674 (618ee92) the `fTry` argument in `push_lock` is no longer needed.
Tree-SHA512: a461f2ca9e590a9dfcc7814d9852d85f03712cb4735176b8b2db0e8dc731597c2a515650998ca7d53cf5a0c48b408a974a0704897036c6ed74788fc24c5e73ae
d601f16 Fix invalid memory access in CScript::operator+= (Anthony Towns)
Pull request description:
This is a fix for #11114 -- invoking "s += s" gets turned into "s.insert(s.end(), s.begin(), s.end())" which can result in an invalid memory access is s.capacity() < 2*s.size() (because s gets resized and possibly moved, so s.begin() and s.end() become invalid references when reading the values to be appended).
The fix is straightforward: reserve enough space in advance, so that insert() doesn't need to resize and thus its arguments remain valid.
A simple test case is added as well; though you probably need to run it via valgrind to actually catch the problem when it's not fixed...
Tree-SHA512: 4720d0c17463fdc43b344c45fe603423d20b30d48da1b9d85eeedc505d7f34db1ed5495ef1556459ae962a94717e3c6e8fc441763771901efea210d01322b7ef
bb8376b Verify DBWrapper iterators are taking snapshots (Matt Corallo)
Pull request description:
The LevelDB docs seem to indicate that an iterator will not take
snapshots (even providing instructions on how to do so yourself).
In several of the places we use them, we assume snapshots to have
been taken.
In order to make sure LevelDB doesn't change out from under us
(and to prevent the next person who reads the docs from having the
same fright I did), verify that snapshots are taken in our tests.
Tree-SHA512: 54f24dabc294962e9c20882f61809604421a661208d1568bb107102248603e8e7c12e929ccb0812a73d4e4f23fea61f1b48e7cc24da5a7260f1d14d89ba88cd6
The LevelDB docs seem to indicate that an iterator will not take
snapshots (even providing instructions on how to do so yourself).
In several of the places we use them, we assume snapshots to have
been taken.
In order to make sure LevelDB doesn't change out from under us
(and to prevent the next person who reads the docs from having the
same fright I did), verify that snapshots are taken in our tests.
1789e4675 Force explicit double -> int conversion for CFeeRate constructor (Matt Corallo)
53a6590f4 Make float <-> int casts explicit outside of test, qt, CFeeRate (Matt Corallo)
0b1b9148c Remove countMaskInv caching in bench framework (Matt Corallo)
Pull request description:
This fixes an issue where estimatesmartfee which matches at the min relay fee will return 999 sat/byte instead of 1000 sat/byte due to a float rounding issue. I went ahead and made all float <-> int conversion outside of test/qt explicit (test only had one or two more, Qt had quite a few, including many in the Qt headers themselves) and added overloads to CFeeRate to force callers to do an explicit round themselves. Easy to test with -Wfloat-conversion.
Tree-SHA512: 66087b08e5dfca67506da54ae057c2f9d86184415e8fa4fa0199e38839e06a3ce96c836fcb7593b7d960065f5240c594ff3a0cfa14333ac528421f5aeac835c9
cee28fbc3 Add error string for CLEANSTACK script violation, preventing an "unknown error" if the CLEANSTACK error condition is set. (Mark Friedenbach)
Pull request description:
This prevents an unhelpful "unknown error" from being printed in test logs if the CLEANSTACK error condition is set.
Tree-SHA512: cd6764e930184aef3d662e40c67f2ea8aea8552a26d33a567d0315a19d707a82aa2afad9f48ecbb731aa5b77fbbfbd7a6a3a989fdb1424a1181350052ff2a9b5
bf64c3cb3 Ignore transactions added to mempool during a reorg for fee estimation purposes. (Alex Morcos)
04f78ab5b Do not reject based on mempool min fee when bypass_limits is set. (Alex Morcos)
fd849e1b0 Change AcceptToMemoryPool function signature (Alex Morcos)
Pull request description:
First commit just removes default arguments from `AcceptToMemoryPool` and consolidates two arguments, it does not change behavior.
Second commit finally fixes the fact that we're not meant to reject based on mempool min fee when adding a transaction from a disconnected block during a reorg as mentioned [here](https://github.com/bitcoin/bitcoin/pull/9602#issue-202197849)
Third commit makes fee estimation ignore transactions added from a disconnected block during a reorg. I think this was another source of fee estimates returning estimates below 1000 sat/kB as in #11303.
Tree-SHA512: 30925ca8b341915bb214f1d2590b36b7931f2e125b7660150e38ae70338f00db5aa7f1608546dddb181446924177eb7cf62ea8bd2583068acc074d6c3f86bc0c
6f33d8c Correct typo in comments (Johnson Lau)
Pull request description:
I think this is a search and replace mistake
Tree-SHA512: a83e081b817f1607496bfdcee47593d45d75cbe72effe944cdb5494b49a341eeeebdeb954f6db59dfa1ddfa350a117a4b26c754725a3459be78f2a1a093c6fde
8213838 [Qt] tolerate BIP173/bech32 addresses during input validation (Jonas Schnelli)
06eaca6 [RPC] Wallet: test importing of native witness scripts (NicolasDorier)
fd0041a Use BIP173 addresses in segwit.py test (Pieter Wuille)
e278f12 Support BIP173 in addwitnessaddress (Pieter Wuille)
c091b99 Implement BIP173 addresses and tests (Pieter Wuille)
bd355b8 Add regtest testing to base58_tests (Pieter Wuille)
6565c55 Convert base58_tests from type/payload to scriptPubKey comparison (Pieter Wuille)
8fd2267 Import Bech32 C++ reference code & tests (Pieter Wuille)
1e46ebd Implement {Encode,Decode}Destination without CBitcoinAddress (Pieter Wuille)
Pull request description:
Builds on top of #11117.
This adds support for:
* Creating BIP173 addresses for testing (through `addwitnessaddress`, though by default it still produces P2SH versions)
* Sending to BIP173 addresses (including non-v0 ones)
* Analysing BIP173 addresses (through `validateaddress`)
It includes a reformatted version of the [C++ Bech32 reference code](https://github.com/sipa/bech32/tree/master/ref/c%2B%2B) and an independent implementation of the address encoding/decoding logic (integrated with CTxDestination). All BIP173 test vectors are included.
Not included (and intended for other PRs):
* Full wallet support for SegWit (which would include automatically adding witness scripts to the wallet during automatic keypool topup, SegWit change outputs, ...) [see #11403]
* Splitting base58.cpp and tests/base58_tests.cpp up into base58-specific code, and "address encoding"-code [see #11372]
* Error locating in UI for BIP173 addresses.
Tree-SHA512: 238031185fd07f3ac873c586043970cc2db91bf7735c3c168cb33a3db39a7bda81d4891b649685bb17ef90dc63af0328e7705d8cd3e8dafd6c4d3c08fb230341
This eases the during-type validation to allow Bech32 chars.
Once the focus has been lost, the address will be properly verified through IsValidDestinationString
b887676 net: remove now-unused functions (Cory Fields)
45fd754 net: remove now-superfluous numeric resolve (Cory Fields)
2416dd7 net: separate resolving and conecting (Cory Fields)
Pull request description:
This is a greatly simplified version of #10285, which only aims to address async resolving.
It essentially breaks up two wrapper functions for things only used in one place (ConnectSocketDirectly/ConnectThroughProxy) in favor of calling them directly. This allows us to fully handle resolves before attempting a connection, as is necessary for async connections.
As a bonus, I believe the logic is now much easier to follow than before.
Tree-SHA512: f03f618107379edf3efe2a9f3e3677e8f075017ab140a0b4fdc3b8263e6beff148d55256263ab10bc2125ef089ca68e0d8e865beeae176f1eca544e769c976d3
395cef7 Change getmininginfo errors field to warnings (Andrew Chow)
8502b20 Unify help text for GetWarnings output in get*info RPCs (Andrew Chow)
f77f0e4 Add warnings field to getblockchaininfo (Andrew Chow)
Pull request description:
The `getblockchaininfo` output does not contain the `errors` field which the `getinfo`, `getmininginfo`, and `getnetworkinfo` RPCs have. It should have it as the errors pertain to the blockchain. This PR adds that field.
This PR also unifies the help text for the `errors` field and its output position so that all of the `get*info` commands are consistent.
`getnetworkinfo`'s `errors` field is named `warnings`. I did not change this even though it is inconsistent since this naming has been in use for a long time.
Tree-SHA512: 385ab6acfee67fc8816f4d51ab2bd7a623264c7973906dfbab0a171f199e9db16fde19093a5bc3dfbdd4ff5f19d2186b646eb6b3bae0a4d7c9add43650a4a9d9
5e69a43 Add test for bitcoin-cli -getinfo (John Newbery)
3826253 rpc: Handle `getinfo` locally in bitcoin-cli w/ `-getinfo` (Wladimir J. van der Laan)
Pull request description:
Since @laanwj doesn't want to maintain these changes anymore, I will.
This PR is a revival of #8843. I have addressed @jnewbery's comments.
Regarding atomicity, I don't think that is a concern here. This is explicitly a new API and those who use it will know that this is different and that it is not atomic.
Tree-SHA512: 9664ed13a5557bda8c43f34d6527669a641f260b7830e592409b28c845258fc7e0fdd85dd42bfa88c103fea3ecdfede5f81e3d91870e2accba81c6d6de6b21ff
22f816ef4 net: Improve and document SOCKS code (Wladimir J. van der Laan)
Pull request description:
Make the SOCKS code more consistent, and document the constants used.
Tree-SHA512: 1bb04fcd6aacb6bfd2c54989d8298c892036466a895efb88be36fbace041af67c964ae0f5fb76c96f813f20a040109de4e0aac49a20844640e4d7633fcb22f25
In the SignatureHash function, the input index must refer to a valid
index. This is not enforced equally in the segwit/non-segwit branches
and should be an assertion rather than returning a error hash.
This adds the infrastructure `BaseRequestHandler` class that takes care
of converting bitcoin-cli arguments into a JSON-RPC request object, and
converting the reply into a JSON object that can be shown as result.
This is subsequently used to handle the `-getinfo` option, which sends
a JSON-RPC batch request to the RPC server with
`["getnetworkinfo", "getblockchaininfo", "getwalletinfo"]`,
and after reply combines the result into what looks like a `getinfo`
result.
There have been some requests for a client-side `getinfo` and this
is my PoC of how to do it. If this is considered a good idea
some of the logic could be moved up to rpcclient.cpp and
used in the GUI console as well.
Extra-Author: Andrew Chow <achow101@gmail.com>
Changes the errors field to warnings. To maintain compatibility,
the errors field is deprecated and enabled by starting bitcoind with
-deprecatedrpc=getmininginfo
048e0c3e2 [rpc] [tests] Add deprecated RPC test (Cristian Mircea Messel)
d4cdbd6fb [rpc] Deprecate estimatefee RPC (John Newbery)
Pull request description:
Deprecates estimatefee in v0.16, for final removal in v0.17.
This commit introduces a phased removal of RPC methods. RPC method is
disabled by default in version x, but can be enabled by using the
`-deprecatedrpc=<methodname>` argument. RPC method is removed entirely in version
(x+1).
This gives users fair warning that an RPC is to be removed, and time to change client software if necessary. Deprecation warnings in RPC return values or release notes are easily ignored.
This is a more generic version of the approach I tried to use in #10841, which too late to make it into v0.15.
Tree-SHA512: 9695a600e84b812974387333e4a6805d18972da30befb754e9e4da77cd9815d00c5cc2ee0b0350bdbbdb5fdc6ba47789f8b2c6f5b15c8cd5a1deefcc4832da30
603efe9fc Fix parameter name typo in ErasePurpose walletdb method. (Pierre Rochard)
Pull request description:
The header file has the correct method signature and the one usage in CWallet::DelAddressBook is correctly passing in EncodeDestination(address)
Tree-SHA512: ee0808a74111fd23a1c47ba5ab51de151fdd33a01d92895671e562ac184cbcb33180a3ff26c22e5717595592097b9fa33deca9878d89ce8d34687f09cfadfcf0
7b137aced [Qt] Add delay before filtering transactions Fixes 3141 (Lucas Betschart)
Pull request description:
As discussed in https://github.com/bitcoin/bitcoin/issues/3141.
This adds a QTimer pause of 200ms before start to filter so it should be possible to filter big data sets easier.
Tree-SHA512: ee599367794eac2c5b8bc7ecac47f44295e40c0ff543ff2f2c4860590f917b59b1cfb273fa564e6eb4c44016c0ef412d49f1a8f1b36b07e034022f51bb76653c
This should make it easier to debug issues where the CheckBlock at
the top of ProcessNewBlock fails (which does not print, in contrast
to AcceptBlock, which always prints).
Deprecate estimatefee in v0.16, for final removal in v0.17.
This commit introduces a phased removal of RPC methods. RPC method is
disabled by default in version x, but can be enabled by using the
`-deprecatedrpc=<method>` argument. RPC method is removed entirely in
version (x+1).
d01a968 wallet: update stored witness in AddToWallet (Suhas Daftuar)
Pull request description:
Replace witness-stripped wallet transactions with full transactions;
this can happen when upgrading from a pre-segwit wallet to a segwit-
aware wallet.
Tree-SHA512: a348b16b38ae738fa75cf7d3ff50ebd0d0071d5d6061c9a10dc3325fc34f6bc96a67aea21fde460ca20f6178768ee0af04d6d8785b35647f436a9083c4270b07
df10edf More user-friendly error message when partially signing (MeshCollider)
Pull request description:
When partially signing a transaction using `signrawtransaction`, if the wallet doesn't have access to a key, it will output a scary error message `"error": "Operation not valid with the current stack size"`, yet it will partially sign the transaction anyway. This puts a lot of users off, because they don't realise the signing actually succeeded for some inputs. This catches that specific error when signing, and outputs a friendlier message which says `Unable to sign input, invalid stack size (possibly missing key)`.
This is the best way I could think of to fix the issue, but please let me know if you come up with a better way to do it :)
Fixes https://github.com/bitcoin/bitcoin/issues/9988
Tree-SHA512: 65e1d4a49caa4202e1357b0b3f42329d76456c7b4286d63232226e03267809027b0c44e0faaa1da8b86c9ad677e3a3d655698a24fc870d6a661203c9f56ef95b
Prevent arbitrary files from being overwritten. There have been reports
that users have overwritten wallet files this way. It may also avoid
other security issues.
Fixes#9934. Adds mention to release notes and adds a test.
28d4542 Disallow uncompressed pubkeys in bitcoin-tx [multisig] output adds (Matt Corallo)
Pull request description:
Does what it says on the tin.
Tree-SHA512: 324b8da8a9f9a35d3ade74f6c587f981894a085dfea9d64f78de745d5e6ec05c3a7bced487e9aad9c8a48151cd14969a0806f30f80b621edfce0da082fe6f4be
13baf72 Replace save|restoreWindowGeometry with Qt functions (MeshCollider)
Pull request description:
Alternative to https://github.com/bitcoin/bitcoin/pull/11208, closes https://github.com/bitcoin/bitcoin/issues/11207
According to the [Qt documentation](https://doc.qt.io/qt-4.8/qwidget.html#restoreGeometry), restoreGeometry does all the checks we need, so it would be better to rely on them instead of doing it ourselves.
~Haven't tested this properly yet, hence the WIP.~
Gives expected behavior exactly as the other system apps do based on my tests. Only potential issue is the case when the GUI is almost entirely offscreen with only a single strip of pixels, its not really possible to see the GUI, but if you know it's there you can bring it back onscreen with just the mouse. And that's exactly how notepad behaves on Windows so I don't think its a real issue.
This also gives much better behavior when closing a maximized window, currently (0.15.0 release) a maximized window will save the window size on close, and then reopen as a not-maximized but still that size, which is really annoying. This reopens as maximized.
Gitian build here: https://bitcoin.jonasschnelli.ch/build/305
Tree-SHA512: a8bde14793b4316192df1fa2eaaeb32b44d5ebc5219c35252379840056cd737a9fd162625fd715987f275fec8375334ec1ec328dbc671563f084c611a938985c
723aa1b qt: Backup former GUI settings on `-resetguisettings` (Wladimir J. van der Laan)
Pull request description:
Writes the GUI settings to `guisettings.bak` in the data directory before wiping them. This can be used to retroactively troubleshoot issues (e.g. #11262) where `-resetguisettings` solves the problem.
(as discussed in yesterday's IRC meeting)
Tree-SHA512: c64f5052d992eb02057ba285435f143c42d0cc456144a4c565e1c87be833737f9df750d0aee10810f85047c820d9b4f9f22fd94a6f09f4b28a9cf41b63a56586
Writes the GUI settings to `guisettings.bak` in the data directory
before wiping them. This can be used to retroactively troubleshoot
issues (e.g. #11262) where `-resetguisettings` solves the problem.
3a131b724 Rename out to m_tx_out in CScriptCheck (Johnson Lau)
e91211878 [Refactor] Combine scriptPubKey and amount as CTxOut in CScriptCheck (Johnson Lau)
Pull request description:
This simplifies CScriptCheck by combining scriptPubKey and amount
Tree-SHA512: 6422363cf5394c6cfefb30c1709db6def63230b809cc7697887e4a2e8c684149208edf91dd139e031b9fe732776b2db59305f77c3cba6f333b11cceb39ef0cc2
22fd04beb Remove nBlockMaxSize from miner opt struct as it is no longer used. (Gregory Maxwell)
Pull request description:
Tree-SHA512: f7a0fa380b4173120f33f96de90581cb57b8bd7af50996f0c726845acff7b92bb1212b924495ef89645624239d2b60d19c1cee2a13139b00e917154a33f7da4c
A C-style cast is equivalent to try casting in the following order:
1. const_cast(...)
2. static_cast(...)
3. const_cast(static_cast(...))
4. reinterpret_cast(...)
5. const_cast(reinterpret_cast(...))
By using static_cast<T>(...) explicitly we avoid the possibility
of an unintentional and dangerous reinterpret_cast. Furthermore
static_cast<T>(...) allows for easier grepping of casts.
In the case of CKey's destructor, it seems to have been an oversight in
f4d1fc259 not to delete it. At this point, it results in the move
constructors/assignment operators for CKey being deleted, which may have
a performance impact.
2a07f878a Refactor: Modernize disallowed copy constructors/assignment (Dan Raviv)
Pull request description:
Use C++11's better capability of expressing an interface of a non-copyable class by publicly deleting its copy ctor and assignment operator instead of just declaring them private.
Tree-SHA512: 878f446be5a136bb2a90643aaeaca62948b575e6ef71ccc5b4b8f373e66f36ced00665128f36504e0ccfee639863d969329c4276154ef9f2a9de9137f0801e01
7a1e873 [script] Unit tests for IsMine (Jim Posen)
d7afe2d [script] Unit tests for script/standard functions (Jim Posen)
Pull request description:
Simply adding unit test coverage.
Tree-SHA512: aaf16b1b07b6d43c884a67f4fd5f83c31bf2c560f78798036d7aa37a3efe71a7ca3c82c4b3ba1f3119bcbe3b78013e64bb0020fe57ebc69aea1cb54943881959
05cae8aef range-based loops and const qualifications in net.cpp (Marko Bencun)
Pull request description:
Plus a use of std::copy() instead of manual copying.
(The loop on line 117 is already done in #10493).
Tree-SHA512: d9839e330c71bb9781a4efa81ee353c9e3fd8a93c2120a309f7a0e516b119dd7abe0f0988546797801258b867a29581978515c05dda9e5b23097e15f705139b4
by individual transactions to 2 places (but call only once in each):
- ConnectBlock ( before calculated fees per txs twice )
- AcceptToMemoryPoolWorker ( before called CheckTxInputs 4 times and calculated
fees per tx one extra time )
Also call tx.GetValueOut() only once per call of CheckTxInputs (instead of 2)
fdc3293 Document assumptions that are being made to avoid NULL pointer dereferences (practicalswift)
Pull request description:
Document assumptions (via `assert(…)`:s) that are being made avoid `NULL` pointer dereferences.
Rationale:
* Make it clear to human reviewers and non-human static analyzers that what might look like potential `NULL` pointer dereferences are written the way they are intentionally (these cases are currently flagged by various static analyzers).
Tree-SHA512: b424328195e2680e1e4ec546298f718c49e5ad182147dc004de580693db1b50eec4065e1c4f232bdb302baa12954265a50ba21cb5ba4ff30248535b2de778672
e53fa4a Remove custom fee radio group (Andrew Chow)
Pull request description:
Removes the extraneous custom fee radio group and its single radio button. The radio button is replaced with a label that has the radio button's text.
Continuation of #11332
Tree-SHA512: b47b675f900ee4e2f4823203a42bb697f707ba67a8504d730c53d4dae511d0ed03226af34efd7ea45570c6111f8b3b6c39ac28f1b5c090de225903442ad4159a
fadf31e wallet: Display non-HD error on first run (MarcoFalke)
Pull request description:
On current master a fresh wallet created with `-usehd=0` is silently created as HD wallet.
An error should be displayed on the first run.
Also, this restores a test that was removed in c22a53cFixes: #11313
Tree-SHA512: 226a4129984324f88a431c7e2726383f6841711f0227d8e9f5b4f89d4bb9f2b8e922e6cf0a6f91d6efa747d139543a236b9f29326fc5d1e5d6f1dea2465d9b85
This was added in order to help OpenNetworkConnection avoid creating a
connection that it would end up aborting. It was necessary because resolving
was done as part of the connection process.
Now that resolving is separated from connecting, this case is detected before
the connection is attempted.
ConnectSocketByName handled resolves as necessary, obscuring the connection
process. With them separated, each can be handled asynchronously.
Also, since proxies must be considered now anyway, go ahead and eliminate the
ConnectSocket wrapper and use ConnectSocketDirectly... directly.
a0b4c2461 Trivial: Fix validation comments (Dan Raviv)
Pull request description:
- Move comment about transaction/block weight calculation so it applies not only to the GetBlockWeight function but also to GetTransactionWeight
- Fix comment in validation.cpp referencing future deployment of BIP113. It has already been deployed.
- The doc comment for BLOCK_DOWNLOAD_WINDOW wasn't updated since pruning was introduced, so it still refers to pruning as something that might happen in the future. A larger BLOCK_DOWNLOAD_WINDOW window would now, indeed, make pruning harder.
Tree-SHA512: ff86ff02c993e8317b9a0decfe5f5b6aae77b7d50e2b253ed73eb553348142bfc30cfeda15fae91907bab8f920e0ea7c52714f4cc7f33a9d6a777f708e2c99ba
std::unordered_map::erase( const_iterator pos ) returns an iterator to the element following the removed one. Use that to optimize (probably minor-performance-wise, and definitely code-structure-wise) the implementation of CCoinsViewCache::BatchWrite().
Use C++11's better capability of expressing an interface of a non-copyable class by publicly deleting its copy ctor and assignment operator instead of just declaring them private.
1444c2e Switch memory_cleanse implementation to BoringSSL's to ensure memory clearing even with link-time optimization. (Adam Langley)
Pull request description:
The implementation we currently use from OpenSSL prevents the compiler from optimizing away clensing operations on blocks of memory that are about to be released, but this protection is not extended to link-time optimization. This commit copies the solution cooked up by Google compiler engineers which uses inline assembly directives to instruct the compiler not to optimize out the call under any circumstances. As the code is in-lined, this has the added advantage of removing one more OpenSSL dependency.
Regarding license compatibility, Google's contributions to BoringSSL library, including this code, is made available under the ISC license, which is MIT compatible.
BoringSSL git commit: ad1907fe73334d6c696c8539646c21b11178f20f
Tree-SHA512: 8134998663c1501e3ce48fbbd6ab41de981f0855e3f4d25d2e86ff8056c917d82c751c88e9c39660319ebfbc8283dce594c3e4fc7f87080a212a2cdba57ea511
- Move comment about transaction/block weight calculation so it applies not only to the GetBlockWeight function but also to GetTransactionWeight
- Fix comment in validation.cpp referencing future deployment of BIP113. It has already been deployed.
- The doc comment for BLOCK_DOWNLOAD_WINDOW wasn't updated since pruning was introduced, so it still refers to pruning as something that might happen in the future. A larger BLOCK_DOWNLOAD_WINDOW window would now, indeed, make pruning harder.
Make the non-const overload of CBlockIndex::GetAncestor() reuse the const overload implementation instead of the other way around. This way, the constness of the const overload implementation is guaranteed. The other way around, it was possible to implement the non-const overload in a way which mutates the object, and since that implementation would be called even for const objects (due to the reuse), we would get undefined behavior.
cdaf3a1 Fix Qt 0.14.2->0.15.0 segfault if "total at least" is selected (Matt Corallo)
Pull request description:
`QButtonGroup->button()` may return a nullptr.
Accessing the object directly with `setChecked` seems fragile.
This is a simple fix to ensure to never call a button out of bounds (nullptr).
There are probably other places where a sanity check for `QSettings` are required.
Found by @achow101.
Code by @TheBlueMatt.
Tree-SHA512: a1b5d6636382a4e20c4e66ef82de19e6daa8b1b5f21b0f2bc5f51cfb6b37797045c7e29ebead8088ee2b990ed12c549c217cae6aad7566319599d086d526f6dc
5acd82de9 rpc: make estimatesmartfee argument naming consistent with documentation (Wladimir J. van der Laan)
24697c40e rpc: update cli for estimatefee argument rename (Wladimir J. van der Laan)
Pull request description:
The first argument of `estimaterawfee` was renamed from `nblocks` to `conf_target` in 06bcdb8da6. Update the client-side table as well.
This makes #10753 pass again.
Tree-SHA512: 107c0072a45e0f4e083dc803d534973e6bd4c005e62337a867815d7c98ab1c21d97b7a495c32763883975cbbb001b80003001a6709b7d9bdd81ce4d441b667be
Combine fLimitFree and fOverrideMempoolLimit into a single boolean:
bypass_limits. This is used to indicate that mempool limiting based on feerate
should be bypassed. It is used when readding transactions from a reorg and then
the mempool is trimmed to size after all transactions are added and they can be
evaluated in the context of their descendants. No changes to behavior.
b86a42077 when clearing addrman clear mapInfo and mapAddr (Gregory Sanders)
Pull request description:
Power failure on my machine resulted in a corrupted addrman that would hit bad assertions when trying to serialize the "cleared" addrman to disk: 6866b4912b/src/addrman.h (L320)
Tree-SHA512: 07ca8b6cbd88407e5f3f0dccb346ae31bd1392f4210b2d5c5647c853986bfec95cf70240b92bafdc61b90e452a5d8315962738d10c10c2b53fdabff10503d05a
This resolves an issue where estimatesmartfee would return 999
sat/byte instead of 1000, due to floating point loss of precision
Thanks to sipa for suggesting is_integral.
We were saving a div by caching the inverse as a float, but this
ended up requiring a int -> float -> int conversion, which takes
almost as much time as the difference between float mul and div.
There are lots of other more pressing issues with the bench
framework which probably require simply removing the adaptive
iteration count stuff anyway.
No sensible user will ever keep the default settings here, so not
having sensible defaults only serves to screw users who are
paying less attention, which makes for terrible defaults.
* This removes block-size-limiting code in favor of GBT clients
doing the limiting themselves (if at all).
* -blockmaxsize is deprecated and only used to calculate an implied
blockmaxweight, addressing confusion from multiple users.
* getmininginfo's currentblocksize return value was returning
garbage values, and has been removed, also removing a
GetSerializeSize call in some block generation inner loops and
potentially addressing some performance edge cases.
f151f5f50 [macOS] remove Growl support, remove unused code (Jonas Schnelli)
Pull request description:
There is no longer a reason to support Growl.
A) It went to pay-ware since a couple of years
B) Since OSX 10.8, the operating system has its own modal notification options (Notification Center).
This PR removes support for Growl.
OSX notification centre is still supported after this PR.
Tree-SHA512: eee18098d7354c4e98f927bca9963d4843ff6bceee74795f73a66c27eed33efaac00ec2cabde8807efcbc936b16ab712249006fa13f5a3f55e4d44d163f5f9a0
713a92073 Remove usehd option and warn when it is used (Andrew Chow)
d4c18f733 Bump wallet version number to 159900 (Andrew Chow)
Pull request description:
Bump the wallet version number to 159900 so that new wallets made without a default key will no longer work on previous versions at all. Also remove the `usehd` option to avoid weird interaction with wallet version numbers and HD-ness of wallets.
Tree-SHA512: dd7965505bfad6a926c79afd423236f509229a398a8398076f8d57d90a5974243f9459a61225c4daee560c796f427445c9e55a3ad528a3a97a9123ca6a1269ab
5d2a3995e [trivial] fixup comment for VerifyWallets() (John Newbery)
43b0e81d0 [wallet] Add StartWallets() function to wallet/init.cpp (John Newbery)
290f3c56d [wallet] Add RegisterWalletRPC() function to wallet/init.cpp (John Newbery)
062d63102 [wallet] Add CloseWallets() function to wallet/init.cpp (John Newbery)
77fe07c15 [wallet] Add StopWallets() function to wallet/init.cpp (John Newbery)
2da5eafa4 [wallet] Add FlushWallets() function to wallet/init.cpp (John Newbery)
1b9cee66e [wallet] Rename WalletVerify() to VerifyWallets() (John Newbery)
9c76ba18c [wallet] Rename InitLoadWallet() to OpenWallets() (John Newbery)
Pull request description:
Apologies for the mostly code move only PR. This is a pre-req for both #10740 and #10762
All wallet component initialization/destruction functions are now in their own `wallet/init.cpp` translation unit and are no longer static functions on the CWallet class. The bitcoin_server also no longer has any knowledge that there are multiple wallets in vpwallet.
There should be no changes in behavior from this PR.
Tree-SHA512: 7c260eb094f2fa1a88d803769ba60935810968a7309f731135e4b17623b97f18c03bbcd293c942093d1efce62c6c978f9ff484d54dc9a60bc2fcb5af2d160fcd
Rationale:
- this init function can now open multiple wallets (hence
Wallet->Wallets)
- This is named as the antonym to CloseWallets(), which carries out the
opposite action.
592404f03 Changing &vec[0] to vec.data(), what 9804 missed (MeshCollider)
Pull request description:
This just continues the work of https://github.com/bitcoin/bitcoin/pull/9804
Modifies a lot of `&vector[]`'s to `vector.data()`'s across all the files including tests, just the stuff that 9804 missed
Tree-SHA512: dd1a9dffb999dea4fba78dcc91fe02f90250db86f5c74948e1ff3e8b4036b2154b600555eaa04dece5368920aae3513bc36425dc96e4319ca1041b0928a6b656
2525b972a net: stop both net/net_processing before destroying them (Cory Fields)
80e2e9d0c net: drop unused connman param (Cory Fields)
8ad663c1f net: use an interface class rather than signals for message processing (Cory Fields)
28f11e940 net: pass CConnman via pointer rather than reference (Cory Fields)
Pull request description:
See individual commits.
Benefits:
- Allows us to begin moving stuff out of CNode and into CNodeState (after #10652 and follow-ups)
- Drops boost dependency and overhead
- Drops global signal registration
- Friendlier backtraces
Tree-SHA512: af2038c959dbec25f0c90c74c88dc6a630e6b9e984adf52aceadd6954aa463b6aadfccf979c2459a9f3354326b5077ee02048128eda2a649236fadb595b66ee3
fe09b0197 add missing lock to crypter GetKeys() (Marko Bencun)
5cb3da04b keystore GetKeys(): return result instead of writing to reference (Marko Bencun)
Pull request description:
Issue: #10905
First commit makes GetKeys() return the result instead of writing to a reference to remove some useless lines.
Tree-SHA512: bb51255b5a6cf5488c3d5dee89f539d41f0717f018441d120047f877e0a705a133fb3b7a97d1cf8f73b5d2ed93dd2dbdfcd6f394e40105af2a12e01d397cb402
061297f0a Ensure that data types are consistent (jjz)
Pull request description:
1. nStatus of CBlockIndex is consistent with the definition of Enum(BlockStatus)
2. The BlockHeader is consistent with the type of variable defined in CBlockHeader
Tree-SHA512: 3d4a55c62d3e17b9c83807eae153db4fcfcd8477c9413a45dedfa157563e77b775a66974648d28c9d44ac45a5705eef83b31a8a3b44316dc9814b85526a9d034
c8d38abd6 Refactor tipUpdate as per style guide (MeshCollider)
3b69a08c5 Fix division by zero in time remaining (MeshCollider)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/10291, https://github.com/bitcoin/bitcoin/issues/11265
progressDelta may be 0 (or even negative according to 11265), this checks for that and prints unknown if it is, because we cannot calculate an estimate for the time remaining (would be infinite or negative).
Tree-SHA512: bc5708e5ed6e4670d008219558c5fbb25709bd99a32c98ec39bb74f94a0b7fa058f3d03389ccdd39e6723e6b5b48e34b13ceee7c051c2db631e51d8ec3e1d68c
9b348ff9e Fix memory leaks in qt/guiutil.cpp (Dan Raviv)
Pull request description:
on macOS:
`listSnapshot` was leaking in `findStartupItemInList()`
`bitcoinAppUrl` was leaking in `[Get|Set]StartOnSystemStartup()`
Tree-SHA512: dd49e1166336cf4f20035d21930f2f99f21f1d9f91a1101b1434a23dd0b92d402ac7efb177473c758d8af1dbab8d8750485583231c5b5854203d2493f0b43e73
ee4d1493e Drop upgrade-cancel callback registration for a generic "resumeable" (Matt Corallo)
Pull request description:
Instead of passing a StartShutdown reference all the way up from
txdb, give ShowProgress a "cancelable" boolean, as StartShutdown
is pretty much always what you'll want to use to cancel. Use the
same boolean to allow cancel during initial block verification.
Tree-SHA512: 515817aaa4b9e3e856200e00be9c2d44ecfa2d4f288fe3e02116105fe85de2650c13076ee7e45396ec1ce6ab45e53b0477cddda7cfdee5b3bd0589cb81a4c346
d2be7b25b Typo in optionsdialog.ui Tooltip displayed ampersand incorrectly, & should be in text. (James Evans)
Pull request description:
Tooltip displayed ampersand incorrectly, & should be in text property rather than tooltip so that access key is correctly displayed for accessibility.
Tree-SHA512: 331848207317d37d4d9db40119d0b7ae9a276d06cd1b057cd0e87d508e1aa769b785246ca30ca9156db632798ec9f68ba8bf78cf42904267b4187bd27cfced35
1. nStatus of CBlockIndex is consistent with the definition of Enum(BlockStatus)
2. The BlockHeader is consistent with the type of variable defined in CBlockHeader
ca67ddf0b Move the AreInputsStandard documentation next to its implementation (esneider)
Pull request description:
The documentation (and rationale) for `AreInputsStandard` somehow got separated from its implementation, and creates a bit of confusion: it's in the middle of the file, next to the implementation of `IsStandard`, which actually checks the "standardness" of outputs, not inputs.
Tree-SHA512: 71281cbcbc5a5701cc11e812a3e90669dda3d92dc2176b512b7832d79b08b34307999c984516bb0c56b01db9b03a12ee4755f662efc1158f4e126de5ca421999
aece8a463 (finally) remove getinfo in favor of more module-specific infos (Matt Corallo)
Pull request description:
I see no reason not to have done this in 0.13, let alone for 0.15.
Tree-SHA512: ed3e36f99e9cb90304089e5957ddfbf74141e3e77d850e498e9e45dd8bc1deb9fe36b3fec4c43243023268670a45808de3c23d660df76fa27db6688814c464a5
There are a few too many edge-cases here to make this a scripted diff.
The following commits will move a few functions into PeerLogicValidation, where
the local connman instance can be used. This change prepares for that usage.
478d4fb79 [docs] explain how to recompile only what bitcoind tests need (Sjors Provoost)
Pull request description:
It was not obvious to me to run `make` inside the test directory, especially because `make src/test` and `make src/test/test_bitcoin` result in `make: Nothing to be done for ...`.
Tree-SHA512: 5fe66c45c50af42d4fed42e3008b1dc4de7ea448f5265a34f4b2f355aa4a48a8187918a49fc9f82e8dd9706bc72c59d0fd67d86057fd816eb317832e46ada7ba
c00199244 Fix potential null dereferences (MeshCollider)
Pull request description:
Picked up by the static analyzer [Facebook Infer](http://fbinfer.com/) which I was playing around with for another research project. Just adding some asserts before dereferencing potentially null pointers.
Tree-SHA512: 9c01dab2d21bce75c7c7ef867236654ab538318a1fb39f96f09cdd2382a05be1a6b2db0a1169a94168864e82ffeae0686a383db6eba799742bdd89c37ac74397
1aa97ee08 Add savemempool RPC (Lawrence Nahum)
467cbbcbf Add return value to DumpMempool (Lawrence Nahum)
Pull request description:
Adds a simple parameterless rpc command to dump the mempool.
Rationale:
Sometimes there can be a crash for whatever reason (bug, power loss, etc) causing the mempool.dat file to not be saved.
This change allows to script/cron the rpc call to have more regular saves to the file as well as cli/ad-hoc.
This should solve issue https://github.com/bitcoin/bitcoin/issues/11086
Tree-SHA512: e856ae9777425a4521279c9b58e69285d8e374790bebefd3284cf91931eac0e456f86224f427a087a01bf70440bf6e439fa02c8a34940eb1046ae473e98b6aaa
The implementation we currently use from OpenSSL prevents the compiler from optimizing away clensing operations on blocks of memory that are about to be released, but this protection is not extended to link-time optimization. This commit copies the solution cooked up by Google compiler engineers which uses inline assembly directives to instruct the compiler not to optimize out the call under any circumstances. As the code is in-lined, this has the added advantage of removing one more OpenSSL dependency.
Regarding license compatibility, Google's contributions to BoringSSL library, including this code, is made available under the ISC license, which is MIT compatible.
BoringSSL git commit: ad1907fe73334d6c696c8539646c21b11178f20f
864cd2787 Move CBitcoinAddress to base58.cpp (Pieter Wuille)
5c8ff0d44 Introduce wrappers around CBitcoinAddress (Pieter Wuille)
Pull request description:
This patch removes the need for the intermediary Base58 type `CBitcoinAddress`, by providing {`Encode`,`Decode`,`IsValid`}`Destination` functions that directly operate on the conversion between `std::string`s and `CTxDestination`.
As a side, it also fixes a number of indentation issues, and removes probably several unnecessary implicit `CTxDestination`<->`CBitcoinAddress` conversions.
This change is far from complete. In follow-ups I'd like to:
* Split off the specific address and key encoding logic from base58.h, and move it to a address.h or so.
* Replace `CTxDestination` with a non-`boost::variant` version (which can be more efficient as `boost::variant` allocates everything on the heap, and remove the need for `boost::get<...>` and `IsValidDestination` calls everywhere).
* Do the same for `CBitcoinSecret`, `CBitcoinExtKey`, and `CBitcoinExtPubKey`.
However, I've tried to keep this patch to be minimally invasive, but still enough to support non-Base58 addresses. Perhaps a smaller patch is possible to hack Bech32 support into `CBitcoinAddress`, but I would consider that a move in the wrong direction.
Tree-SHA512: c2c77ffb57caeadf2429b1c2562ce60e8c7be8aa9f8e51b591f354b6b441162625b2efe14c023a1ae485cf2ed417263afa35c892891dfaa7844e7fbabccab85e
This patch removes the need for the intermediary Base58 type
CBitcoinAddress, by providing {Encode,Decode,IsValid}Destination
function that directly operate on the conversion between strings
and CTxDestination.
617c459c6 qa: rpc test for wtxid in mempool entry (Suhas Daftuar)
7e5d5965d RPC: add wtxid to mempool entry output (Suhas Daftuar)
Pull request description:
We already cache this information in the mempool, so including it in the output of rpc calls is basically free.
Tree-SHA512: 2757e1bfca028103937e4b76ce1a5d805846bad5d3d9dd631dcc5f87721bcc0e9d19e437e02053ef1dd3b38b503f0fca8c0b8492cac37dfbd70256a3665f704c
37495e0d8 Reorder C{,Mutable}Transaction for better packing (Jeremy Rubin)
Pull request description:
These commits revise the layout of a few key classes to eliminate padding, eliminating useless memory overhead.
-This reduces CTransaction from 96 bytes to 88 bytes
Tree-SHA512: 91d1fec363edebbb1f1a5b98142c767511e99d3be857148a76e31cc512c9ab3d153083fa6b46b6407974d3b88de984b436c33e8606fbb2b273d74c825195aa17
dea086f49 Stop test_bitcoin-qt touching ~/.bitcoin (MeshCollider)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/11192
The directory remains unused, but this stops the tests touching ~/.bitcoin at all (namely creating it if it doesn't exist)
Tree-SHA512: e59ad6b83dbc5ea2fb2761994c09933721d29668b0eef09b9d938a4ee1c67871c5125c57483ee0ea25f2385e308d275d86bcb9087dd4d502923013b4f3dbac82
eac64bb7a [qa] Test nMinimumChainWork (Suhas Daftuar)
0311836f6 Allow setting nMinimumChainWork on command line (Suhas Daftuar)
Pull request description:
As discussed briefly here: https://botbot.me/freenode/bitcoin-core-dev/2017-02-28/?msg=81712308&page=4
This adds a hidden command line option for setting `nMinimumChainWork`, which allows us to test this parameter in our functional tests, as well as allowing for niche use cases like syncing nodes that are otherwise disconnected from the network.
See also #10345, which proposes a new use of `nMinimumChainWork`.
Tree-SHA512: fe4d8f4f289697615c98d8760f1cc74c076110310ea0b5b875fcab78c127da9195b4eb84148aebacc7606c246e5773d3f13bd5d9559d0a8bffac20a3a28c62df
`make` rebuilds the entire project. This is quite slow if e.g. you're making changes to one file and only wish to run the bitcoind tests.
This commit adds an instruction to run `make -C src/test` (as opposed to `make src/test` and `make src/test/test_bitcoin`).
352d582ba Add vConnect to CConnman::Options (Marko Bencun)
Pull request description:
Split the "-connect" argument parsing out of CConnman and put it into
AppInitMain().
Tree-SHA512: f2d3efc4e2c5808ff98696ea20dd96df599bc472ed5afc9c3eea305d94c36a6ab50c632aa05396c7c34d1917d91b1e7ccd725656ff2631e2a36d9eac477455dc
ce3baa193 changed regtest RPCport to 18443 to avoid conflict with testnet 18332 (Ferdinando M. Ametrano)
Pull request description:
using the same JSON-RPC default port for both testnet and regtest prevents running both at the same time on the same machine. Since RPCport=P2Pport-1 for both mainnet and testnet, and regtest P2Pport being 18444, 18443 is proposed for regtest RPCport
Documentation has been updated (or created where missing); manpages doc/man/bitcoin*.1 could include information for regtest too
Tree-SHA512: d42185f7ef54dc918ece19b543c8681d08bb9c5a971394e21f2d9a1091734b091b08df69fab622c207b46f402cf9323ded5b7a33fbd0af722388930169124e7f
a1ea1cfbd qt: Use IsMine to validate custom change address (Chris Moore)
Pull request description:
Fixes#11137Closes#11184 (which was accidentally opened against 0.15 branch)
Tree-SHA512: a20a59b4f36c1471a9c84bcc7c69048576d1f413104c299a7ed9ba221f28eddf93d727fca2926420ea5d0dd9aba582924f26a5acd44d995039b7202c73eb53bc
47ba2c312 Fix currency/fee-rate unit string in the help text (Akio Nakamura)
Pull request description:
1. The RPC help text should use the constant `CURRENCY_UNIT` defined in `policy/feerate.cpp` instead of the literal `'BTC'`.
In the following 2 RPC commands, `'BTC'` is written directly in the help text.
This commit changes them to use that constant.
1) `estimatesmartfee`
2) `estimaterawfee`
2. Some RPC command use `'satoshis'` as the unit.
It should be written as `'satoshis'` instead of `'Satoshis'` in the RPC help text.
So, this commit fixes this typo in `getblocktemplate`.
Tree-SHA512: d0bd1cd90560e59bf456b076b958a2a1c998f85a7e65aeb6b2abcaba18919a3ae62f7c3909210461084c1a3275a35b6ba3ea3ec8f5cce33702ffe383c9e84bce
d1138e362 Remove redundant testutil files (MeshCollider)
Pull request description:
The only function in testutil.cpp, `GetTempPath()` simply called `fs::temp_directory_path()` directly. This just tidies things up by removing that redundant function and the file containing it
I can understand wanting a general util file for tests to use, but if there's nothing in it, we might as well remove it, it can always be added back later when it's put to use.
Tree-SHA512: b923f99acf33328743755368a1aa90f5da4a7d5f61b163a4b0b894275c98db80a91edf8f051fbfb4893d970fda5a9078aae78a2672867ff521c4ca4b653c71c0
5abb93f0e Fix include path for bitcoin-config.h in crypto/common.h (danra)
Pull request description:
All the other files in the repo which include bitcoin-config.h do so with the appropriate subfolder prefixed: config/bitcoin-config.h
The header should be included with the appropriate subfolder here as well.
Tree-SHA512: abda23a9cf251553f90afe0ee1866de46ed579471f4139737239a4f9334ca817d985deac6336740898718775d1264c0b80cb348668b10a9cae970895f2de37b8
5ac072caa Fix boost headers included as user instead of system headers (Dan Raviv)
Pull request description:
In most of the project, boost headers are included as system headers.
Fix the few inconsistent places where they aren't.
Tree-SHA512: 280af33a7bdc9d68a15b729fa88e1e7627e20a054b8d52a12cc5350c1ac9e9c90fb09f0aa97a00960969f75bcf3403dc52b834c94448b814efa63bfaf3b82663
538cc0ca8 build: Mention use of asm in summary (Wladimir J. van der Laan)
ce5381e7f build: Rename --enable-experimental-asm to --enable-asm and enable by default (Wladimir J. van der Laan)
Pull request description:
Now that 0.15 is branched off, enable assembler SHA256 optimizations by default, but still allow disabling them, for example if something goes wrong with auto-detection on a platform.
Also add mention of the use of asm in the configure summary.
Tree-SHA512: cd20c497f65edd6b1e8b2cc3dfe82be11fcf4777543c830ccdec6c10f25eab4576b0f2953f3957736d7e04deaa4efca777aa84b12bb1cecb40c258e86c120ec8
ec6902d0e rpc: Push down safe mode checks (Andrew Chow)
Pull request description:
This contains most of the changes of #10563 "remove safe mode" by @achow101, but doesn't remove the safe mode yet, but put an `ObserveSafeMode()` check in (all 23) individual calls which used to have okSafeMode=false.
This cleans up the ugly "okSafeMode" flag from the dispatch tables, which is not a concern for the RPC server.
Extra-author: Wladimir J. van der Laan <laanwj@gmail.com>
Tree-SHA512: eee0f251fe2f38f122e7391e3c4e98d6a1e2757f3b718d6b560ad835ae94f11490865a0aef893e90b5fe298165932c8dd8298224173ac2677a5245cd532bac6e
1. The RPC help text should use the constant CURRENCY_UNIT defined in
policy/feerate.cpp instead of the literal 'BTC'. In the following
2 RPC commands, 'BTC' is written directly in the help text.
1) estimatesmartfee
2) estimaterawfee
And also, for these help strings, the notation
'fee-per-kilobyte (in BTC)' is somewhat ambiguous.
To write more precisely, this commit changes to 'fee rate in BTC/kB'
with using the constant CURRENCY_UNIT.
2. Some RPC command use 'satoshis' as the unit. It should be written
as 'satoshis' instead of 'Satoshis' in the RPC help text.
So, this commit fixes this typo in getblocktemplate.
3. The phrase that '... feerate (BTC per KB) ...' is used to explain
the fee rate in the help text of following 2 RPC commands.
1) getmempoolinfo
2) fundrawtransaction
But they are different from other similar help text of the RPCs.
And also, 'KB' implies Kibibyte (2^10 byte).
To unify and to clarify, this commit changes these phrase to
'... fee rate in BTC/kB ...'.
(BTC references the constant 'CURRENCY_UNIT')
1bcd44223 Remove the virtual specifier for functions with the override specifier (practicalswift)
Pull request description:
Remove the `virtual` specifier for functions with the `override` specifier.
`override` implies that the function is virtual (in addition - of course - to guaranteeing that the function is overriding a virtual function from a base class).
Tree-SHA512: 2e83e1b3651f55f8f2645282114ab087ad3a0be8826f26ee5c2064d0952f677290b97261398c1d524ec7f87bbbfdbeefc141180f6099c8bbfa4c59a14f7fa755
On startup, the wallets will start pumping wallet transactions into the mempool in a different thread while LoadMempool() is running.
This will sometimes result in transactions "failing" to be accepted into mempool, but only for the reason that they were already
put there by a wallet. The log message for mempool load would note this as a 'failure' to import, which was misleading; it should
instead mark it as the transaction already being in the mempool.
Replace witness-stripped wallet transactions with full transactions;
this can happen when upgrading from a pre-segwit wallet to a segwit-
aware wallet.
All the other files in the repo which include bitcoin-config.h do so with the appropriate subfolder prefixed: config/bitcoin-config.h
The header should be included with the appropriate subfolder here as well.
This canonicalization also allows getting rid of a bit of extra configuration in Makefile.am.
This contains most of the changes of 10563 "remove safe mode", but doesn't
remove the safe mode yet, but put an `ObserveSafeMode()` check in
individual calls with okSafeMode=false.
This cleans up the ugly "okSafeMode" flag from the dispatch tables,
which is not a concern for the RPC server.
Extra-author: Wladimir J. van der Laan <laanwj@gmail.com>
6d2d2eb49 RPC: gettxout: Slightly improve doc and tests (Jorge Timón)
Pull request description:
Slightly related to https://github.com/bitcoin/bitcoin/pull/10822 in the sense that I felt the documentation and testing wasn't as good as it could be while writing it.
Ping @sipa since we discussed this on IRC.
Tree-SHA512: a0b3ffdac65245a0429e772fc2d8bcc1e829b02c70fb2af6ee0b7578cae46683f6c51a824b4d703d4dc3f99b6f03a658d6bbc818bf32981516f24124249a211d
eefc2f3 Move local include to before system includes (danra)
Pull request description:
Prevents accidental missing includes and hidden dependencies in the local file.
Tree-SHA512: 466b9dd53c596980fdbcccf1dfd8f34eb7ec5b32323ccb635e5705efcedc81af8fbe155ac57b9a2fc5c1f516489e940d1762b3508ded1fb54e187219bb9f75e6
a473eff [bench] Replace 0.00(000)1 with MICRO/MILLI #defines in validation.cpp. (Karl-Johan Alm)
5f850b0 [bench] Include ms/blk stats in Connect* benchmarks. (Karl-Johan Alm)
Pull request description:
Display the average per block runtime for the various benchmarked times in the block connect functions to give an overview of long(er) term time distribution statistics.
Tree-SHA512: 3d6f24f6b9e3dbb448a647e2cda8e7b90ad6a16d4821f49f426a8e1ebc3ce5a0cf0a8cde82213e293affba441615702dfe50822c8c818e282af03bfe383d83e0
de9a1db Acquire cs_main lock before cs_wallet during wallet initialization (Russell Yanofsky)
Pull request description:
`CWallet::MarkConflicted` may acquire the `cs_main` lock after `CWalletDB::LoadWallet` acquires the `cs_wallet` lock during wallet initialization. (`CWalletDB::LoadWallet` calls `ReadKeyValue` which calls `CWallet::LoadToWallet` which calls `CWallet::MarkConflicted`). This is the opposite order that `cs_main` and `cs_wallet` locks are acquired in the rest of the code, and so leads to `POTENTIAL DEADLOCK DETECTED` errors if bitcoin is built with `-DDEBUG_LOCKORDER`.
This commit changes `CWallet::LoadWallet` (which calls `CWalletDB::LoadWallet`) to acquire both locks in the standard order.
Error was reported by @luke-jr in https://botbot.me/freenode/bitcoin-core-dev/msg/90244330/
Tree-SHA512: 353fe21bc0a4a2828b41876897001a3c414d4b115ee7430925bd391d8bc396fca81661145d00996c1ba1a01516d9acf8b89fb5c3da27092f5f3aa7e37ef26ffa
6af49dd Output a bit more information for fee calculation report. (Alex Morcos)
a54c7b9 Fix rounding errors in calculation of minimum change size (Alex Morcos)
Pull request description:
Thanks to @juscamarena for reporting this.
Please backport to 0.15.
There was a potential rounding error where the fee for the change added to the fee for the original tx could be less than the fee for the tx including change.
This is fixed in the first commit. The second commit adds one more snippet of information in the fee calculation report. I actually realized that there is more information that would be nice to report, but we can add that post 0.15.
An open question is whether we should be returning failure if the test in line 2885 is hit or just resetting pick_new_inputs and continuing. Originally I made it a failure to avoid any possible infinite loops. But the case hit here is an example of where that logic possibly backfired.
Tree-SHA512: efe049781acc1f6a8ad429a689359ac6f7b7c44cdfc9578a866dff4a2f6596e8de474a89d25c704f31ef4f8c89af770e98b75ef06c25419d5a6dfc87247bf274
b426e24 Remove redundant explicitly defined copy ctors (Dan Raviv)
Pull request description:
CFeeRate and CTxMemPoolEntry have explicitly defined copy ctors which has the same functionality as the implicit default copy ctors which would have been generated otherwise.
Besides being redundant, it violates the rule of three (see https://en.wikipedia.org/wiki/Rule_of_three_(C%2B%2B_programming) ).
(Of course, the rule of three doesn't -really- cause a resource management issue here, but the reason for that is exactly that there is no need for an explicit copy ctor in the first place since no resources are being managed).
Tree-SHA512: c9294ebf5d955d230b44c6f0d20822975d44a34471a717d656f8b17181bcd2827f47ba897edf5accd650f5998c58aadc8ab3c91a3f556f1f6de36830ed4069ce
e40fa98 Simplify bswap_16 implementation (danra)
Pull request description:
Simplify bswap_16 implementation on platforms which don't already have it defined.
This has no effect on the generated assembly; it just simplifies the source code.
Tree-SHA512: 1c6ac1d187a2751da75256d12b6b890160d15246dd2c2b6a56748ec43482e3a5a3323be2910f07b42d3dc243a568c7412c26eaa036efec764436e988abd1c3f1
82dd719 rpc: Write authcookie atomically (Wladimir J. van der Laan)
Pull request description:
Use POSIX rename atomicity at the `bitcoind` side to create a working
cookie atomically:
- Write `.cookie.tmp`, close file
- Rename `.cookie.tmp` to `.cookie`
This avoids clients reading invalid/partial cookies as in #11129. As such, this is an alternative to that PR.
Tree-SHA512: 47fcc1ed2ff3d8fed4b7441e4939f29cc99b57b7a035673c3b55a124a2e49c8a904637a6ff700dd13a184be8c0255707d74781f8e626314916418954e2467e03
e254830 Make tabs toolbar no longer have a context menu (Andrew Chow)
Pull request description:
Adds a contextMenuPolicy of Qt::PreventContextMenu to prevent the tabs toolbar from showing a context menu that allows it to be hidden.
Fixes#11168
Tree-SHA512: 8900b3c1a891ead3c9a20dc365b436fa75f97dbe0dfa7e20ee26fd9d09f3fee6eda286b0c075ed89fe1361608ecbdd87c744e37d97a3fba62493a86dedda867b
CFeeRate and CTxMemPoolEntry have explicitly defined copy ctors which has the same functionality as the implicit default copy ctors which would have been generated otherwise.
Besides being redundant, it violates the rule of three (see https://en.wikipedia.org/wiki/Rule_of_three_(C%2B%2B_programming) ).
(Of course, the rule of three doesn't -really- cause a resource management issue here, but the reason for that is exactly that there is no need for an explicit copy ctor in the first place since no resources are being managed).
CFeeRate has an explicitly defined copy ctor which has the same functionality as the implicit default copy ctor which would h
ave been generated otherwise.
946638d0a Improve versionbits_computeblockversion test code consistency (danra)
Pull request description:
In this test, `nTime` is used for all the calls to `Mine()`, each time being set to the correct time beforehand, except for in the last few calls to `Mine()` where `nStartTime` is used directly, even though `nTime` is still set to `nStartTime` beforehand. `nTime` just remains unused for these last few calls to `Mine()`.
Changed the last few calls to `Mine()` to use `nTime` instead, improving consistency. This also fixes an unused value static analyzer warning about `nTime` being set to a value which is never used.
Tree-SHA512: f17cf1d29fd7097d53c0135d6357ee50943bd81b5ce0be785a37b85d34b5127cd6cc17ef844b519e19c33f2d96f7ababee643b9fba7afb031f444b2cfaeedbfd
In this test, `nTime` is used for all the calls to `Mine()`, each time being set to the correct time beforehand, except for in the last few calls to `Mine()` where `nStartTime` is used directly, even though `nTime` is still set to `nStartTime` beforehand. `nTime` just remains unused for these last few calls to `Mine()`.
Changed the last few calls to `Mine()` to use `nTime` instead, improving consistency. This also fixes an unused value static analyzer warning about `nTime` being set to a value which is never used.
bc70ab5 Fix header guards using reserved identifiers (Dan Raviv)
Pull request description:
Identifiers beginning with an underscore followed immediately by an uppercase letter are reserved.
Tree-SHA512: 32b45e0aef6f6325bc3cbdea399532437490b753621149374df27e1c1eed6739ad1a09ae368e888cab8d01fb757f1b190c45a0854d2861de39a9296f17e29d9e
f01103c MOVEONLY: Init functions wallet/wallet.cpp -> wallet/init.cpp (Russell Yanofsky)
e7fe320 MOVEONLY: Fee functions wallet/wallet.cpp -> wallet/fees.cpp (Russell Yanofsky)
d97fe20 Move some static functions out of wallet.h/cpp (Russell Yanofsky)
Pull request description:
This just moves some static wallet fee and init functions out of `wallet/wallet.cpp` and into new `wallet/fees.cpp` and `wallet/init.cpp` source files. There is one commit updating declarations and callers, followed by two MOVEONLY commits actually moving the function bodies.
This change is desirable because wallet.h/cpp are monolithic and hard to navigate, so pulling things out and grouping together pieces of related functionality should improve the organization.
Another motivation is the wallet process separation work in https://github.com/bitcoin/bitcoin/pull/10973, where (at least initially) parameter parsing and fee estimation are still done in the main process rather than the wallet process, and having functions that run in different processes scrambled up throughout wallet.cpp is unnecessarily confusing.
Tree-SHA512: 6e6982ff82b2ab4e681c043907e2b1801ceb9513394730070f16c46ad338278a863f5b3759aa13db76a259b268b1c919c81f4e339f0796a3cfb990161e8c316d
Simplify bswap_16 implementation on platforms which don't already have it defined.
This has no effect on the generated assembly; it just simplifies the source code.
Use POSIX rename atomicity at the `bitcoind` side to create a working
cookie atomically:
- Write `.cookie.tmp`, close file
- Rename `.cookie.tmp` to `.cookie`
This avoids clients reading invalid/partial cookies as in #11129.
1. Calculate nblocks more adaptive.
If not specify nblocks-parameter, illegal parameter error
will happen when target block height is below blocks for 1 month.
To avoid this error, set default nblocks to
min(blocks for 1 month, target block's height - 1)
And allowing 0 so that this RPC works good even if target block is
genesis block or 1st block.
2. Correct error message.
nblocks accepts [0 .. block's height -1] . so fix as following:
"Invalid block count: should be between 0 and the block's height - 1"
3. Add check 0-divide.
If nTimeDiff = 0 then returns {... "txrate":} and
bitcoin-cli cannot handle the response.
To avoid this error, do not return "txrate" if nTimeDiff = 0.
4. Add following 3 elements to the return object.
1) 'window_block_count' : Size of the window in number of blocks.
2) 'window_tx_count' : The number of transactions in the window.
3) 'window_interval' : The elapsed time in the window.
They clarify how 'txrate' is calculated. 2) and 3) are returned
only if 'window_block_count' is a positive value.
5. Improve help text for 'time' as following.
'The timestamp for the final block in the window in UNIX format.
f1708ef89 Add recommendation: By default, declare single-argument constructors `explicit` (practicalswift)
Pull request description:
This is a follow-up to the now merged #10969.
Add recommendation:
> By default, declare single-argument constructors `explicit`.
>
> - *Rationale*: This is a precaution to avoid unintended conversions that might arise when single-argument constructors are used as implicit conversion functions.
>
Tree-SHA512: 1ceb1008a7863ebd0f09ba9c06b4e28b3b03265d7381f9d0c8bd4be1663d5d0392de0ecd811027aa27c0d962723674b245b3c165a437942a776f3525db39d36b
cd0ea4874 Changing -txindex requires -reindex, not -reindex-chainstate (Matt Corallo)
Pull request description:
If there's an 0.15.0rc3, this should go in it.
Tree-SHA512: 857e77f0af9c055a3d1d91f37474ee9e06d6bc8c5ed21b29201b6c386801e7041523949076cdf0daa4d357a5175ce49394d85a1bedfbf13f3e577bdb6da1d6ce
CWallet::MarkConflicted may acquire the cs_main lock after
CWalletDB::LoadWallet acquires the cs_wallet lock during wallet initialization.
(CWalletDB::LoadWallet calls ReadKeyValue which calls CWallet::LoadToWallet
which calls CWallet::MarkConflicted). This is the opposite order that cs_main
and cs_wallet locks are acquired in the rest of the code, and so leads to
POTENTIAL DEADLOCK DETECTED errors if bitcoin is built with -DDEBUG_LOCKORDER.
This commit changes CWallet::LoadWallet (which calls CWalletDB::LoadWallet) to
acquire both locks in the standard order. It also fixes some tests that were
acquiring wallet and main locks out of order and failed with the new locking in
CWallet::LoadWallet.
Error was reported by Luke Dashjr <luke-jr@utopios.org> in
https://botbot.me/freenode/bitcoin-core-dev/msg/90244330/
ecb11f5 Document the non-strict-DER-conformance of one test in tx_valid.json. (Andreas Schildbach)
Tree-SHA512: 4d5ba4645fbfe8fe3f1baaa5f1a1152cdd2cbf3d901f38d8e7fbd56b16caa6a8a17f2a48c74fb725ce454dd1c870b81b2238e89d0639fcd4eee858554726e996
In a signature, it contains an ASN1 integer which isn't strict-DER conformant due to excessive 0xff padding:
0xffda47bfc776bcd269da4832626ac332adfca6dd835e8ecd83cd1ebe7d709b0e
a897d0e tests: Remove OldSetKeyFromPassphrase/OldEncrypt/OldDecrypt (practicalswift)
Pull request description:
Reduces the number of non-free:d allocs with four (Δ in use at exit = -928 bytes).
With this patch applied:
```
$ valgrind --leak-check=full --show-leak-kinds=all src/test/test_bitcoin --log_level=test_suite --run_test=wallet_crypto
…
==20243== HEAP SUMMARY:
==20243== in use at exit: 72,704 bytes in 1 blocks
==20243== total heap usage: 53,138 allocs, 53,137 frees, 49,600,420 bytes allocated
==20243==
==20243== 72,704 bytes in 1 blocks are still reachable in loss record 1 of 1
==20243== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==20243== by 0x6AA5EFF: ??? (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==20243== by 0x40106B9: call_init.part.0 (dl-init.c:72)
==20243== by 0x40107CA: call_init (dl-init.c:30)
==20243== by 0x40107CA: _dl_init (dl-init.c:120)
==20243== by 0x4000C69: ??? (in /lib/x86_64-linux-gnu/ld-2.23.so)
==20243== by 0x2: ???
==20243== by 0xFFF0006A2: ???
==20243== by 0xFFF0006B8: ???
==20243== by 0xFFF0006CF: ???
==20243==
==20243== LEAK SUMMARY:
==20243== definitely lost: 0 bytes in 0 blocks
==20243== indirectly lost: 0 bytes in 0 blocks
==20243== possibly lost: 0 bytes in 0 blocks
==20243== still reachable: 72,704 bytes in 1 blocks
==20243== suppressed: 0 bytes in 0 blocks
```
Without this patch applied:
```
$ valgrind --leak-check=full --show-leak-kinds=all src/test/test_bitcoin --log_level=test_suite --run_test=wallet_crypto
…
==19023== HEAP SUMMARY:
==19023== in use at exit: 73,632 bytes in 5 blocks
==19023== total heap usage: 52,718 allocs, 52,713 frees, 49,502,962 bytes allocated
==19023==
==19023== 24 bytes in 1 blocks are still reachable in loss record 1 of 5
==19023== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==19023== by 0x642DE77: CRYPTO_malloc (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E5665: lh_insert (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E7BB3: ??? (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E87AD: ERR_get_state (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E883D: ERR_put_error (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64EAAE4: EVP_DecryptFinal_ex (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x3AD150: wallet_crypto::OldDecrypt(std::vector<unsigned char, std::allocator<unsigned char> > const&, std::vector<unsigned char, secure_allocator<unsigned char> >&, unsigned char const*, unsigned char const*) (crypto_tests.cpp:81)
==19023== by 0x3AF892: wallet_crypto::TestCrypter::TestDecrypt(CCrypter const&, std::vector<unsigned char, std::allocator<unsigned char> > const&, std::vector<unsigned char, std::allocator<unsigned char> > const&) (crypto_tests.cpp:137)
==19023== by 0x3AD5E9: wallet_crypto::decrypt::test_method() (crypto_tests.cpp:223)
==19023== by 0x3ADC11: wallet_crypto::decrypt_invoker() (crypto_tests.cpp:216)
==19023== by 0x182596: invoke<void (*)()> (callback.hpp:56)
==19023== by 0x182596: boost::unit_test::ut_detail::callback0_impl_t<boost::unit_test::ut_detail::unused, void (*)()>::invoke() (callback.hpp:89)
==19023==
==19023== 128 bytes in 1 blocks are still reachable in loss record 2 of 5
==19023== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==19023== by 0x642DE77: CRYPTO_malloc (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E5331: lh_new (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E7862: ??? (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E7B7F: ??? (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E87AD: ERR_get_state (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E883D: ERR_put_error (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64EAAE4: EVP_DecryptFinal_ex (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x3AD150: wallet_crypto::OldDecrypt(std::vector<unsigned char, std::allocator<unsigned char> > const&, std::vector<unsigned char, secure_allocator<unsigned char> >&, unsigned char const*, unsigned char const*) (crypto_tests.cpp:81)
==19023== by 0x3AF892: wallet_crypto::TestCrypter::TestDecrypt(CCrypter const&, std::vector<unsigned char, std::allocator<unsigned char> > const&, std::vector<unsigned char, std::allocator<unsigned char> > const&) (crypto_tests.cpp:137)
==19023== by 0x3AD5E9: wallet_crypto::decrypt::test_method() (crypto_tests.cpp:223)
==19023== by 0x3ADC11: wallet_crypto::decrypt_invoker() (crypto_tests.cpp:216)
==19023==
==19023== 176 bytes in 1 blocks are still reachable in loss record 3 of 5
==19023== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==19023== by 0x642DE77: CRYPTO_malloc (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E530F: lh_new (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E7862: ??? (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E7B7F: ??? (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E87AD: ERR_get_state (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E883D: ERR_put_error (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64EAAE4: EVP_DecryptFinal_ex (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x3AD150: wallet_crypto::OldDecrypt(std::vector<unsigned char, std::allocator<unsigned char> > const&, std::vector<unsigned char, secure_allocator<unsigned char> >&, unsigned char const*, unsigned char const*) (crypto_tests.cpp:81)
==19023== by 0x3AF892: wallet_crypto::TestCrypter::TestDecrypt(CCrypter const&, std::vector<unsigned char, std::allocator<unsigned char> > const&, std::vector<unsigned char, std::allocator<unsigned char> > const&) (crypto_tests.cpp:137)
==19023== by 0x3AD5E9: wallet_crypto::decrypt::test_method() (crypto_tests.cpp:223)
==19023== by 0x3ADC11: wallet_crypto::decrypt_invoker() (crypto_tests.cpp:216)
==19023==
==19023== 600 bytes in 1 blocks are still reachable in loss record 4 of 5
==19023== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==19023== by 0x642DE77: CRYPTO_malloc (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E8745: ERR_get_state (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E883D: ERR_put_error (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64EAAE4: EVP_DecryptFinal_ex (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x3AD150: wallet_crypto::OldDecrypt(std::vector<unsigned char, std::allocator<unsigned char> > const&, std::vector<unsigned char, secure_allocator<unsigned char> >&, unsigned char const*, unsigned char const*) (crypto_tests.cpp:81)
==19023== by 0x3AF892: wallet_crypto::TestCrypter::TestDecrypt(CCrypter const&, std::vector<unsigned char, std::allocator<unsigned char> > const&, std::vector<unsigned char, std::allocator<unsigned char> > const&) (crypto_tests.cpp:137)
==19023== by 0x3AD5E9: wallet_crypto::decrypt::test_method() (crypto_tests.cpp:223)
==19023== by 0x3ADC11: wallet_crypto::decrypt_invoker() (crypto_tests.cpp:216)
==19023== by 0x182596: invoke<void (*)()> (callback.hpp:56)
==19023== by 0x182596: boost::unit_test::ut_detail::callback0_impl_t<boost::unit_test::ut_detail::unused, void (*)()>::invoke() (callback.hpp:89)
==19023== by 0x596CCB0: ??? (in /usr/lib/x86_64-linux-gnu/libboost_unit_test_framework.so.1.58.0)
==19023== by 0x594C995: boost::execution_monitor::catch_signals(boost::unit_test::callback0<int> const&) (in /usr/lib/x86_64-linux-gnu/libboost_unit_test_framework.so.1.58.0)
==19023==
==19023== 72,704 bytes in 1 blocks are still reachable in loss record 5 of 5
==19023== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==19023== by 0x6AA5EFF: ??? (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==19023== by 0x40106B9: call_init.part.0 (dl-init.c:72)
==19023== by 0x40107CA: call_init (dl-init.c:30)
==19023== by 0x40107CA: _dl_init (dl-init.c:120)
==19023== by 0x4000C69: ??? (in /lib/x86_64-linux-gnu/ld-2.23.so)
==19023== by 0x2: ???
==19023== by 0xFFF0006A2: ???
==19023== by 0xFFF0006B8: ???
==19023== by 0xFFF0006CF: ???
==19023==
==19023== LEAK SUMMARY:
==19023== definitely lost: 0 bytes in 0 blocks
==19023== indirectly lost: 0 bytes in 0 blocks
==19023== possibly lost: 0 bytes in 0 blocks
==19023== still reachable: 73,632 bytes in 5 blocks
==19023== suppressed: 0 bytes in 0 blocks
==19023==
==19023== For counts of detected and suppressed errors, rerun with: -v
==19023== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 0 from 0)
```
Tree-SHA512: 38b6552736a5710a42dbad770c490583cfc762acbec716f5db4cf38314f494ea99430713ea407c73b49d867676ced221a282437f3fcfd8346f8f68386f4fc74d
b82c55a Add attribute [[noreturn]] (C++11) to functions that will not return (practicalswift)
Pull request description:
Add attribute `[[noreturn]]` (C++11) to functions that will not return.
Rationale:
* Reduce the number of false positives/false negatives from static analyzers with regards to things such as unused or unreachable code
* Potentially enable additional compiler optimizations
Tree-SHA512: 899683fe8b2fcf19bd334352271d368b46b805be9d426aac1808335fd95732d6d7078d3296951b9879196f3f6e3ec0fdb7695d0afdc3fbe4dd78a2ca70e91ff7
360b464 Comments: More comments on functions/globals in standard.h. (Jim Posen)
Pull request description:
I was confused about what "data carrier" meant, so I wanted to comment the `fAcceptDatacarrier` and `nMaxDatacarrierBytes` fields specifically. Then I figured I'd add docs for the rest of the functions.
Tree-SHA512: e6d0cfe6f4a2ab52ae76f984b1f5d8de371ae938e7832be8b02517d868f1caea62fec8888c917a2bd3d8ef74025de7f00dc96923fa56436dc6b190626652bf29
745d2e3 Clean up getbalance RPC parameter handling (Russell Yanofsky)
fd5d71e Update developer notes after params.size() cleanup (Russell Yanofsky)
e067673 Avoid treating null RPC arguments different from missing arguments (Russell Yanofsky)
e666efc Get rid of redundant RPC params.size() checks (Russell Yanofsky)
Pull request description:
This is a followup to #10783.
- The first commit doesn't change behavior at all, just simplifies code.
- The second commit just changes RPC methods to treat null arguments the same as missing arguments instead of throwing type errors.
- The third commit updates developer notes after the cleanup.
- The forth commit does some additional code cleanup in `getbalance`.
Followup changes that should happen in future PRs:
- [ ] Replace uses of `.isTrue()` with calls to `.get_bool()` so numbers, objects, and strings cause type errors instead of being interpreted as false. https://github.com/bitcoin/bitcoin/pull/11050#discussion_r133850525
- [ ] Add braces around if statements. https://github.com/bitcoin/bitcoin/pull/11050#discussion_r133851133
- [ ] Maybe improve UniValue type error exceptions and eliminate RPCTypeCheck and RPCTypeCheckArgument functions. https://github.com/bitcoin/bitcoin/pull/11050#discussion_r133829303
Tree-SHA512: e72f696011d20acc0778e996659e41f9426bffce387b29ff63bf59ad1163d5146761e4445b2b9b9e069a80596a57c7f4402b75a15d5d20f69f775ae558cf67e9
4aa2508 Bugfix: Use testnet RequireStandard for -acceptnonstdtxn default (Luke Dashjr)
Pull request description:
Fixes a bug introduced in #8855
`-acceptnonstdtxn` is a valid option only for testnet/regtest (in Core), and the help message reflects that. Currently, however, it is buggy in two ways:
1. It uses mainnet to get the default value, which doesn't make sense since the option is never available for mainnet, and the only time the option is available, is when the default is the opposite.
2. It uses the value of "require standard" directly as the default for "accept non-standard transactions", but these concepts are opposites: a negation must be performed to transform one to the other.
Note the combination of these bugs results in the correct boolean output, but the logic to get there is completely wrong.
Tree-SHA512: 06ce513f59ba31f7ab4b6422a08a17bb37a5652dea4c38a4bbefedd5e2752d17bfccc32a4b0508068fa4783e316bff00a821ef18a24b1a2bb02859995d188fdc
40a0f9f Enable devirtualization opportunities by using the final specifier (C++11) (practicalswift)
9a1675e optim: mark a few classes final (Cory Fields)
Pull request description:
Using gcc's ```-Wsuggest-final-types``` and lto, I identified a few easy devirtualization wins:
> wallet/wallet.h:651:7: warning: Declaring type 'struct CWallet' final would enable devirtualization of 26 calls [-Wsuggest-final-types]
>coins.h:201:7: warning: Declaring type 'struct CCoinsViewCache' final would enable devirtualization of 13 calls [-Wsuggest-final-types]
>txdb.h:67:7: warning: Declaring type 'struct CCoinsViewDB' final would enable devirtualization of 5 calls [-Wsuggest-final-types]
>zmq/zmqnotificationinterface.h:16:7: warning: Declaring type 'struct CZMQNotificationInterface' final would enable devirtualization of 4 calls [-Wsuggest-final-types]
>httpserver.cpp:42:7: warning: Declaring type 'struct HTTPWorkItem' final would enable devirtualization of 2 calls [-Wsuggest-final-types]
Tree-SHA512: 2a825fd27121ccabaacff5cde2fc8a50d1b4cc846374606caa2a71b0cd8fcb0d3c9b5b3fd342d944998610e2168048601278f8a3709cc515191a0bb2d98ba782
6bbdafc Pass serialization flags and whether to include hex to TxToUniv (Andrew Chow)
e029c6e Only return hex field once in getrawtransaction (Andrew Chow)
Pull request description:
The hex is already returned in `TxToUniv()`, no need to give it out a second time in getrawtransaction itself.
Tree-SHA512: 270289f2d6dea37f51f5a42db3dae5debdbe83c6b504fccfd3391588da986ed474592c6655d522dc51022d4b08fa90ed1ebb249afe036309f95adfe3652cb262
Instead of passing a StartShutdown reference all the way up from
txdb, give ShowProgress a "resumeable" boolean, which is used to
inform the user if the action will be resumed, but cancel is always
allowed by just calling StartShutdown().
e53615b Remove vchDefaultKey and have better first run detection (Andrew Chow)
Pull request description:
Removes vchDefaultKey which was only used for first run detection. Improves wallet first run detection by checking to see if any keys were read from the database.
This also fixes a (rather contrived) case where an encrypted non-HD wallet has corruption such that the default key is no longer valid and is loaded into a Core version that supports HD wallets. This causes a runtime exception since a new hd master key is generated as the software believes the wallet file is newly created but cannot add the generated key to the wallet since it is encrypted. I was only able to replicate this error by creating a non-hd wallet, encrypting it, then editing the wallet using `db_dump` and `db_load` before loading the wallet with hd enabled. This problem has been reported by [two](https://bitcointalk.org/index.php?topic=1993244.0) [users](https://bitcointalk.org/index.php?topic=1746976.msg17511261#msg17511261) so it is something that can happen, although that raises the question of "what corrupted the default key".
~P.S. I don't know what's up with the whitespace changes. I think my text editor is doing something stupid but I don't think those are important enough to attempt undoing them.~ Undid those
Tree-SHA512: 63b485f356566e8ffa033ad9b7101f7f6b56372b29ec2a43b947b0eeb1ada4c2cfe24740515d013aedd5f51aa1890dfbe499d2c5c062fc1b5d272324728a7d55
67ceff4 [wallet] Add logging to MarkReserveKeysAsUsed (John Newbery)
1221f60 [wallet] Remove keypool_topup_cleanups (John Newbery)
Pull request description:
A couple of minor cleanups suggested by @ryanofsky here: https://github.com/bitcoin/bitcoin/pull/11022#pullrequestreview-55598940
Does not affect functionality. Not required for v0.15.
Tree-SHA512: d8d0698fd26ea49a4157e68669d5511095760c3a1ecfa3f917e3f273efbafb55c51a202d677614216eae3f796b6e8d17506b2ec2d4799a94f18981b396e65eec
8f2f1e0 wallet: Avoid second mapWallet lookup (João Barbosa)
Pull request description:
All calls to `mapWallet.count()` have the intent to detect if a `txid` exists and most are followed by a second lookup to retrieve the `CWalletTx`.
This PR replaces all `mapWallet.count()` calls with `mapWallet.find()` to avoid the second lookup.
Tree-SHA512: 96b7de7f5520ebf789a1aec1949a4e9c74e13683869cee012f717e5be8e51097d068e2347a36e89097c9a89f1ed1a1529db71760dac9b572e36a3e9ac1155f29
bea8e9e Document the preference of nullptr over NULL or (void*)0 (practicalswift)
Pull request description:
Document the preference of `nullptr` over `NULL` or `(void*)0`.
After this commit:
```
$ git grep "[^A-Za-z_]NULL[^A-Za-z_]" | grep -vE '(leveldb|univalue|secp256k1|torcontrol|NULL certificates|ctaes|release-notes|patches|configure.ac|developer-notes)'
$
```
Some context:
* `NULL → nullptr` was handled in the recently merged PR #10483
* `0 → nullptr` was handled in the recently merged PR #10645
Tree-SHA512: f863096aa4eb21705910f89713ca9cc0d83c6df2147e3d3530c3e1589b96f6c68de8755dcf37d8ce99ebda3cfb69805e00eab13bf65424aaf16170e9dda3958a
07685d1 Add length check for CExtKey deserialization (Jonas Schnelli)
Pull request description:
Fix a potential overwrite or uninitialised data issue.
That code part is currently unused (at least in Bitcoin Core).
We already do the same check `CExtPubKey`.
Reported by @guidovranken
Tree-SHA512: 069ac5335248cf890491bc019537d3b0f7481428a4b240c5cd28ee89b56f4c9f45d947dd626fe89b2fae58472b6dbef57ed909876efe9963e2d72380d17cff12
f9ca0fe Fix combinerawtransaction RPC help result section (Jonas Nick)
Pull request description:
Without this PR it looks like the RPC would return something like a dictionary. But it just returns the transaction in hex.
Tree-SHA512: 565571fbb60cb805f81198cf0eab9ecdc04b62aff58c56145449235cd7c21215f4a1d7a5694d01c1a815fe0e787e5b790d24b71e2f9cc595cda16462ab680b8d
a622a1768 Fix constness of ArgsManager methods (João Barbosa)
Pull request description:
Make `cs_args` mutex mutable so that const methods can acquire it.
There's also tiny performance improvement by avoiding two map lookups when retrieving an argument value.
Tree-SHA512: ece58469745f2743b4b643242b51889a3d9c5b76492ed70bb74d4e5b378fff59da79fc129e499da779bf9f488c9435dda17ad1f3a804c1c30f56af422389e8bd
986255026 Use the noexcept specifier (C++11) instead of deprecated throw() (practicalswift)
Pull request description:
Use the `noexcept` specifier (C++11) instead of deprecated `throw()`.
Tree-SHA512: cf9b6b18f61f2f59bbeceb2e43b5cd07a60f5e569c8def05c410cb72326d597c80cb731059969ef89fa5fddaae1242225886e6109fcb535c4ad62d56ebcdf1ea
6e8c48dc5 Add const to methods that do not modify the object for which it is called (practicalswift)
Pull request description:
Tree-SHA512: a6888111ba16fb796e320e60806e1a77d36f545989b5405dc7319992291800109eab0b8e8c286b784778f41f1ff5289e7cb6b4afd7aec77f385fbcafc02cffc1
08f71c29e [Trivial] Add a comment on the use of prevector in script. (Gregory Maxwell)
Pull request description:
Tree-SHA512: 020981516e67e576685eb9a8532178fb97d1780af409fc86d869cd05c293c0c823c26e838cf544d18610f5a3f479ce3e47d2ccb95fb1c4e55fe9e7ceb354f20b
f42fc1d50 doc: spelling fixes (klemens)
Pull request description:
patch contains some spelling fixes ( just in comments ) as found by a bot ( http://www.misfix.org, https://github.com/ka7/misspell_fixer ).
Tree-SHA512: ba6046cfcd81b0783420daae7d776be92dd7b85a593e212f8f1b4403aca9b1b6af12cef7080d4ea5ed4a14952fd25e4300109a59c414e08f5395cdb9947bb750
Removes vchDefaultKey which was only used for first run detection.
Improves wallet first run detection by checking to see if any keys
were read from the database.
This will now also check for a valid defaultkey for backwards
compatibility reasons and to check for any corruption.
Keys will stil be generated on the first one, but there won't be
any shown in the address book as was previously done.
Only change in behavior is that unsupported combinations of parameters now
trigger more specific error messages instead of the vague "JSON value is not a
string as expected" error.
03bc719a8 [wallet] Close DB on error. (Karl-Johan Alm)
Pull request description:
This PR intends to plug some leaks. It specifically implements adherence to the requirement in BDB to close a handle which failed to open (https://docs.oracle.com/cd/E17276_01/html/api_reference/C/dbopen.html):
> The `DB->open()` method returns a non-zero error value on failure and 0 on success. If `DB->open()` fails, the `DB->close()` method must be called to discard the DB handle.
Tree-SHA512: cc1f2b925ef3fd6de785f62108fbc79454443397f80707762acbc56757841d2c32b69c0234f87805571aa40c486da31f315ca4c607a2c7d1c97c82a01301e2a6
f4c3d2c Enable disablesafemode by default. (Gregory Maxwell)
Pull request description:
Safemode is almost useless as is-- it only triggers in limited
cases most of which aren't even concerning. There have been
several proposals to remove it. But as a simpler, safer, and
more flexible first case, simply deactivate it by default.
Anyone who wants it can re-enable and know what they've signed up for.
Tree-SHA512: f5409a3e81514c32db8eb27c7563ef85e25e56e5fc2a59eac2c30b10ec54087d982c1d3b702bedf9f3133c1f272f23805582a0f468350ba18d8b5a02bedd6401
This changes RPC methods to treat null arguments the same as missing arguments,
instead of throwing type errors. Specifically:
- `getbalance` method now returns the wallet balance when the `account` param
is null instead of throwing a type error (same as when parameter is missing).
It is still an error to supply `minconf` or `watchonly` options when the
account is null.
- `addnode` and `setban` methods now return help text instead of type errors if
`command` params are null (same as when params are missing).
- `sendrawtransaction`, `setaccount`, `movecmd`, `sendfrom`,
`addmultisigaddress`, `listaccounts`, `lockunspent` methods accept null
default values where missing values were previously allowed, and treat them
the same.
This commit just moves a few function declarations and updates callers.
Function bodies are moved in two followup MOVEONLY commits.
This change is desirable because wallet.h/cpp are monolithic and hard to
navigate, so pulling things out and grouping together pieces of related
functionality should improve the organization.
Another proximate motivation is the wallet process separation work in
https://github.com/bitcoin/bitcoin/pull/10973, where (at least initially)
parameter parsing and fee estimation are still done in the main process rather
than the wallet process, and having functions that run in different processes
scrambled up throughout wallet.cpp is unnecessarily confusing.
90d4d89 scripted-diff: Use the C++11 keyword nullptr to denote the pointer literal instead of the macro NULL (practicalswift)
Pull request description:
Since C++11 the macro `NULL` may be:
* an integer literal with value zero, or
* a prvalue of type `std::nullptr_t`
By using the C++11 keyword `nullptr` we are guaranteed a prvalue of type `std::nullptr_t`.
For a more thorough discussion, see "A name for the null pointer: nullptr" (Sutter &
Stroustrup), http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2431.pdf
With this patch applied there are no `NULL` macro usages left in the repo:
```
$ git grep NULL -- "*.cpp" "*.h" | egrep -v '(/univalue/|/secp256k1/|/leveldb/|_NULL|NULLDUMMY|torcontrol.*NULL|NULL cert)' | wc -l
0
```
The road towards `nullptr` (C++11) is split into two PRs:
* `NULL` → `nullptr` is handled in PR #10483 (scripted, this PR)
* `0` → `nullptr` is handled in PR #10645 (manual)
Tree-SHA512: 3c395d66f2ad724a8e6fed74b93634de8bfc0c0eafac94e64e5194c939499fefd6e68f047de3083ad0b4eff37df9a8a3a76349aa17d55eabbd8e0412f140a297
3f8fa7f Make sure to clean up mapBlockSource if we've already seen the block (Cory Fields)
Pull request description:
Otherwise we may leave them dangling.
Credit TheBlueMatt.
Tree-SHA512: 8be77e08ebfc4f5b206d5ee7cfbe87f92c1eb5bc2b412471993658fe210306789aaf0f3d1454c635508a7d8effede2cf5ac144d622b0157b872733d9661d65c3
85c82b5 Avoid masking of difficulty adjustment errors by checkpoints (Pieter Wuille)
Pull request description:
Currently difficulty adjustment violations are not reported for chains that branch off before the last checkpoint. Change this by moving the checkpoint check after the difficulty check.
Tree-SHA512: 33666f2c3459151b28c42041a463779e6df18f61d3dd5b1879a0af4e5b199ef74d1e33e06af68bebfdfb211569ad5fb56556bfebe9d63b5688d910ea211b839a
d34957e [wallet] [tests] Add keypool topup functional test (Jonas Schnelli)
095142d [wallet] keypool mark-used and topup (John Newbery)
c25d90f [wallet] Add HasUnusedKeys() helper (John Newbery)
f2123e3 [wallet] Cache keyid -> keypool id mappings (John Newbery)
83f1ec3 [wallet] Don't hold cs_LastBlockFile while calling setBestChain (John Newbery)
2376bfc [wallet] [moveonly] Move LoadKeyPool to cpp (Matt Corallo)
cab8557 [wallet] [moveonly] Move CAffectedKeysVisitor (Jonas Schnelli)
Pull request description:
This PR contains the first part of #10882 :
- if a key from the keypool is used, mark all keys up to that key as used, and then try to top up the keypool
- top up the keypool on startup
Notably, it does not stop the node or prevent the best block from advancing if the keypool drops below a threshold (which means that transactions may be missed and funds lost if restoring from an old HD wallet backup).
Tree-SHA512: ac681fefeaf7ec2aab2fa1da93d12273ea80bd05eb48d7b3b551ea6e5d975dd97ba7de52b7fba52993823280ac4079cc36cf78a27dac708107ebf8fb6326142b
c5ebddd11 Tests: address placement should be deterministic by default (René Nyffenegger)
Pull request description:
Better version of wrong and closed pull request https://github.com/bitcoin/bitcoin/pull/10764
Tree-SHA512: dfda6ea4a9dd0f4c8b96212ad43a716ff1dddf115cd2712a2a7e42c97fc9494079c746906b39d880a9827c05d2b75c728afd4ca4519ce4d365f0dae0c4aec24c
Currently difficulty adjustment violations are not reported for
chains that branch off before the last checkpoint. Change this
by moving the checkpoint check after the difficulty check.
This commit adds basic keypool mark-used and topup:
- try to topup the keypool on initial load
- if a key in the keypool is used, mark all keys before that as used and
try to top up
4d4fb33fc Rename member field according to the style guide. (Pavel Janík)
Pull request description:
After #10193, approx. five instances of this warning are printed when compiling with `-Wshadow`:
```
In file included from txmempool.cpp:14:
./reverse_iterator.h:20:22: warning: declaration shadows a field of 'reverse_range<T>' [-Wshadow]
reverse_range(T &x) : x(x) {}
^
./reverse_iterator.h:17:8: note: previous declaration is here
T &x;
^
1 warning generated.
```
Tree-SHA512: 6c07c2ed6f4f232a3a8bdcdd6057040967c74552fd29d80f42e8a453b95baf203c410aa31dccc08ff2e765cbba02b1a282f6ea7804955f09b31ab20ef383792e
fd05132e5 Restore default format state of cout after printing with std::fixed/setprecision (practicalswift)
Pull request description:
Restore default format state of `std::cout` after printing with `std::fixed`/`std::setprecision`.
Tree-SHA512: 445b5b42aff58e2350939e8febc9b4a6fff478616abfe831aec42bee906cefac7a153c93d506407fb213d04dae9c7afbb5bfd344be63ca0f40ae39b331a4144f
Safemode is almost useless as is-- it only triggers in limited
cases most of which aren't even concerning. There have been
several proposals to remove it. But as a simpler, safer, and
more flexible first case, simply deactivate it by default.
Anyone who wants it can re-enable and know what they've signed up for.
861f9a2 Skip remainder of init if upgrade is cancelled (Matt Corallo)
Pull request description:
Based on #10919.
Without this, if you cancel upgrade, you get a needless error:
ERROR: VerifyDB(): *** irrecoverable inconsistency in block data at
Tree-SHA512: aa47665682c6605ada376f1c100ce17cf8c4312427929eb2e75306f2199b47cbcdb4e0d98d5efcfefff03947b2c0fcbd3aab487a4ed14d50607df685c91a03d0
055d95f [wallet] return correct error code from resendwallettransaction (John Newbery)
Pull request description:
New code in #10995 uses `RPC_INVALID_REQUEST`. According to the comment in rpc/protocol.h:
```
// RPC_INVALID_REQUEST is internally mapped to HTTP_BAD_REQUEST (400).
// It should not be used for application-layer errors.
```
Change the returned error code to `RPC_WALLET_ERROR`
#11000 will need to be updated to test for the correct error code.
Tree-SHA512: 0201b3a2091adf17ad301825da5bd29f0ea7e284b5394cbef80483fc293a558acc849f74a0780bb8501acab324fc722e41ae049cffec7afb76884e26df4b809e
ce07638 doc: Add comment to use ValueFromAmount/AmountFromValue for JSON, not utilmoneystr (Wladimir J. van der Laan)
ec05c50 rpc: Use ValueFromAmount instead of FormatMoney in TxToUniv (Wladimir J. van der Laan)
46347ad rpc: Move ValueFromAmount to core_write (Wladimir J. van der Laan)
dac3782 doc: Correct AmountFromValue/ValueFromAmount names (Wladimir J. van der Laan)
Pull request description:
With this, the amounts returned in `decoderawtransaction` will be padded to 8 digits like anywhere else in the API.
This is accomplished by using `ValueFromAmount` in `TxToUniv`, instead of `FormatMoney` which it currently (mistakingly) uses. The `FormatMoney` function is only for debugging/logging use!
To avoid dependency issues, `ValueFromAmount` is moved to `core_write.cpp`, where it also fits better. I don't move `AmountFromValue` to `core_read.cpp` at the same time, as this would have more impact due to the RPCError dependency there.
(n.b.: large number of changed files is solely due to the util_tests JSONs needing update)
Tree-SHA512: 10fc2d27d33a77dbcb57aa7eccd4f53110c05d38eb7df6d40f10f14c08fad4274472e93af75aa59fe68ad0720fdf0930f0108124abef518e0dd162b3d2b2b292
ee2d10a Check if sys/random.h is required for getentropy on OSX. (James Hilliard)
Pull request description:
This should check and include sys/random.h if required for osx as mentioned [here](https://github.com/bitcoin/bitcoin/pull/9821#issuecomment-290936636).
Tree-SHA512: e9491f67f2e8b2e6bcdbcbb8063295e844d5627daf5336e3e17b4a8027d888fa65a08e4580a745abdc35ffd8d86b4fc7434daaac172c4a06ab7566a2ed0bfb92
This is necessary because core_write has to write amounts in
TxToUniv, and mistakingly uses FormatMoney for that
(which is only for debugging).
We don't move AmountFromValue at the same time, as
this is more challenging due to the RPCError depencency
there.
01699fb Fix resendwallettransactions assert failure if -walletbroadcast=0 (Matt Corallo)
Pull request description:
This fixes#10981 in my preferred way.
Tree-SHA512: 2e43d3ac78d13c5d59db23a82c76c722cc3344767a8237617080e489296d27a98bb1b3bd469b2c9b289b57a9da3709c90448d7a23bcc2e1dfb791c4fd16be015
e7539f8 Fix some broken init-time prints/constants (Matt Corallo)
13ab353 Check for empty coinsview instead of just-reset coinsview in init (Matt Corallo)
fce3f4f Fix resume-of-reindex-after-restart (Matt Corallo)
efac91e Always wait for threadGroup to exit in bitcoind shutdown (Matt Corallo)
Pull request description:
This is a follow-on to #10758 to help move 10758 along. The first fixes a regression in master that was partially fixed in 10758, the second I'm not sure if its a regression or not, but its clearly a bug that should be fixed.
Tree-SHA512: aca7b97a97dca66e1a218a33cc6f4aa002292ff1bb0af64e35b81fbaa91b9504f2605375808b43e93a63fc73634ad079b30ef6c9f4ba338d3b5f72d816dfeaff
1de73f4 Disconnect network service bits 6 and 8 until Aug 1, 2018 (Matt Corallo)
Pull request description:
Immediately disconnect peers that use service bits 6 and 8 until August 1st, 2018
These bits have been used as a flag to indicate that a node is running incompatible
consensus rules instead of changing the network magic, so we're stuck disconnecting
based on the service bits, at least for a while.
Staying connected to nodes on other networks only prevents both sides from reaching consensus quickly, wastes network resources on both sides, etc.
Didn't add constants to protocol.h as the code there notes that "service bits should be allocated via the BIP process".
Tree-SHA512: 2d887774fcf20357019ffc2a8398464c76c1cff2c4e448c92bd5f391d630312301977fea841e0534df6641c7c5547605a5aad82859c59c4bd68be865e6d5a4c6
1967d2a qt: Increase BLOCK_CHAIN_SIZE constants (Wladimir J. van der Laan)
Pull request description:
- Increase `BLOCK_CHAIN_SIZE` from 120GB to 150GB
- Increase `CHAIN_STATE_SIZE` from 2GB to 4GB
I took the local sizes of the blocks and chainstate directory, and added a bit extra to accomodate the near future (15GB for the chain and 1GB for the chainstate).
Tree-SHA512: 76ec7770bd3a30380b0224a0f307cdad14c8227ef726dd55738cebe9d894430865aff11e05a793fd3e60d8fe019dbb392f574c1fb63ec746618b4460ed64bd0c
11dd29b [net] Fix use of uninitialized value in getnetworkinfo(const JSONRPCRequest& request) (practicalswift)
Pull request description:
When running `test_bitcoin` under Valgrind I found the following issue:
```
$ valgrind src/test/test_bitcoin
...
==10465== Use of uninitialised value of size 8
==10465== at 0x6D09B61: ??? (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x6D0B1BB: std::ostreambuf_iterator<char, std::char_traits<char> > std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::_M_insert_int<unsigned long>(std::ostreambuf_iterator<char, std::char_traits<char> >, std::ios_base&, char, unsigned long) const (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x6D0B36C: std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::do_put(std::ostreambuf_iterator<char, std::char_traits<char> >, std::ios_base&, char, unsigned long) const (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x6D17699: std::ostream& std::ostream::_M_insert<unsigned long>(unsigned long) (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x4CAAD7: operator<< (ostream:171)
==10465== by 0x4CAAD7: formatValue<ServiceFlags> (tinyformat.h:345)
==10465== by 0x4CAAD7: void tinyformat::detail::FormatArg::formatImpl<ServiceFlags>(std::ostream&, char const*, char const*, int, void const*) (tinyformat.h:523)
==10465== by 0x1924D4: format (tinyformat.h:510)
==10465== by 0x1924D4: tinyformat::detail::formatImpl(std::ostream&, char const*, tinyformat::detail::FormatArg const*, int) (tinyformat.h:803)
==10465== by 0x553A55: vformat (tinyformat.h:947)
==10465== by 0x553A55: format<ServiceFlags> (tinyformat.h:957)
==10465== by 0x553A55: std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > tinyformat::format<ServiceFlags>(char const*, ServiceFlags const&) (tinyformat.h:966)
==10465== by 0x54C952: getnetworkinfo(JSONRPCRequest const&) (net.cpp:462)
==10465== by 0x28EDB5: CallRPC(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >) (rpc_tests.cpp:31)
==10465== by 0x293947: rpc_tests::rpc_togglenetwork::test_method() (rpc_tests.cpp:88)
==10465== by 0x2950E5: rpc_tests::rpc_togglenetwork_invoker() (rpc_tests.cpp:84)
==10465== by 0x182496: invoke<void (*)()> (callback.hpp:56)
==10465== by 0x182496: boost::unit_test::ut_detail::callback0_impl_t<boost::unit_test::ut_detail::unused, void (*)()>::invoke() (callback.hpp:89)
...
```
The read of the uninitialized variable `nLocalServices` is triggered by `g_connman->GetLocalServices()` in `getnetworkinfo(const JSONRPCRequest& request)` (`net.cpp:462`):
```c++
UniValue getnetworkinfo(const JSONRPCRequest& request)
{
...
if(g_connman)
obj.push_back(Pair("localservices", strprintf("%016x", g_connman->GetLocalServices())));
...
}
```
The reason for the uninitialized `nLocalServices` is that `CConnman::Start(...)` is not called
by the tests, and hence the initialization normally performed by `CConnman::Start(...)` is
not done.
This commit adds a method `Init(const Options& connOptions)` which is called by both the
constructor and `CConnman::Start(...)`. This method initializes `nLocalServices` and the other
relevant values from the supplied `Options` object.
Tree-SHA512: d8742363acffd03b2ee081cc56840275569e17edc6fa4bb1dee4a5971ffe4b8ab1d2fe7b68f98a086bf133b7ec46f4e471243ca08b45bf82356e8c831a5a5f21
- Increase `BLOCK_CHAIN_SIZE` from 120GB to 150GB
- Increase `CHAIN_STATE_SIZE` from 2GB to 4GB
I took the local sizes of the blocks and chainstate directory, and added
a bit extra to accomodate the near future (15GB for the chain and 1GB
for the chainstate).
49d903e Eliminate fee overpaying edge case when subtracting fee from recipients (Alex Morcos)
Pull request description:
I'm not sure if this is the cause of the issue in #10034 , but this was a known edge case. I just didn't realize how simple the fix is.
Could use a couple more eyes to make sure nothing silly can go wrong here, but if we all agree it's this simple, we can add this as another 0.15 bug fix.
Tree-SHA512: db1dd1e83363a3c231267b626d3a388893ee70ba1972056fe2c339c5c9e4fbfd30f7fe837c30cc7be884d454797fd4c619b9d631a8d5eeb55cdb07402a83acb3
When running test_bitcoin under Valgrind I found the following issue:
```
$ valgrind src/test/test_bitcoin
...
==10465== Use of uninitialised value of size 8
==10465== at 0x6D09B61: ??? (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x6D0B1BB: std::ostreambuf_iterator<char, std::char_traits<char> > std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::_M_insert_int<unsigned long>(std::ostreambuf_iterator<char, std::char_traits<char> >, std::ios_base&, char, unsigned long) const (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x6D0B36C: std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::do_put(std::ostreambuf_iterator<char, std::char_traits<char> >, std::ios_base&, char, unsigned long) const (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x6D17699: std::ostream& std::ostream::_M_insert<unsigned long>(unsigned long) (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x4CAAD7: operator<< (ostream:171)
==10465== by 0x4CAAD7: formatValue<ServiceFlags> (tinyformat.h:345)
==10465== by 0x4CAAD7: void tinyformat::detail::FormatArg::formatImpl<ServiceFlags>(std::ostream&, char const*, char const*, int, void const*) (tinyformat.h:523)
==10465== by 0x1924D4: format (tinyformat.h:510)
==10465== by 0x1924D4: tinyformat::detail::formatImpl(std::ostream&, char const*, tinyformat::detail::FormatArg const*, int) (tinyformat.h:803)
==10465== by 0x553A55: vformat (tinyformat.h:947)
==10465== by 0x553A55: format<ServiceFlags> (tinyformat.h:957)
==10465== by 0x553A55: std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > tinyformat::format<ServiceFlags>(char const*, ServiceFlags const&) (tinyformat.h:966)
==10465== by 0x54C952: getnetworkinfo(JSONRPCRequest const&) (net.cpp:462)
==10465== by 0x28EDB5: CallRPC(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >) (rpc_tests.cpp:31)
==10465== by 0x293947: rpc_tests::rpc_togglenetwork::test_method() (rpc_tests.cpp:88)
==10465== by 0x2950E5: rpc_tests::rpc_togglenetwork_invoker() (rpc_tests.cpp:84)
==10465== by 0x182496: invoke<void (*)()> (callback.hpp:56)
==10465== by 0x182496: boost::unit_test::ut_detail::callback0_impl_t<boost::unit_test::ut_detail::unused, void (*)()>::invoke() (callback.hpp:89)
...
```
The read of the uninitialized variable nLocalServices is triggered by g_connman->GetLocalServices()
in getnetworkinfo(const JSONRPCRequest& request) (net.cpp:462):
```c++
UniValue getnetworkinfo(const JSONRPCRequest& request)
{
...
if(g_connman)
obj.push_back(Pair("localservices", strprintf("%016x", g_connman->GetLocalServices())));
...
}
```
The reason for the uninitialized nLocalServices is that CConnman::Start(...) is not called
by the tests, and hence the initialization normally performed by CConnman::Start(...) is
not done.
This commit adds a method Init(const Options& connOptions) which is called by both the
constructor and CConnman::Start(...). This method initializes nLocalServices and the other
relevant values from the supplied Options object.
This fixes a few cases where we should be treating a restart-after-
coinsviewdb-reset identically to a just-reset-coinsviewdb.
Thanks to @morcos for identifying the bug.
This more clearly uses fReindex vs fReset to make sure we're not
clearing our coinsdb needlessly when restarting after a reindex.
It also makes it so that restarting after shutting down mid-reindex
isn't treates specially at all during txdb loading code, as it
shouldn't be.
This resolves a possible-assert-on-shutdown race introduced in
1f668b6468 when early shutdown
occurs.
Previously this was not done to avoid any cases where the
threadGroup might not exit due to a blocking thread, but at this
point the threadGroup isn't used all that much, plus Qt already
does this, and its good to keep their init/shutdown consistent.
For those curious, the threadGroup is only used in a few places:
* Its used to run the CCheckQueues in script validation, but these
use the boost mutex/condition variable primitives, so they
respect the interrupt pretty trivially.
* Its used for the import thread, which should exit rather quickly
as mostly it just calls LoadExternalBlockFile, which has an
interruption_point right before each block loaded.
* Its used in the scheduler thread, which is only used for:
* validationinterface has an effectively-dummy reference to it.
* wallet compaction, which should not last long
* addr/banlist dumping from CConnman, which should also be fast
e222dc2 Replace ismine with producesignature check in witnessifier (Andrew Chow)
Pull request description:
Instead of using ismine to check whether an address can be spent by us, make the witness version of the script or address first and then use ProduceSignature with the DummySignatureCreator to check if we can
solve for the script.
This is to fix cases where we don't have all of the private keys (for something like a multisig address) but have the redeemscript so we can witnessify it.
Tree-SHA512: 371777aee839cceb41f099109a13689120d35cf3880cde39216596cc2aac5cc1096af7d9cf07ad9306c3b05c073897f4518a7e97f0b88642f1e3b80b799f481e
efeb273 Force on-the-fly compaction during pertxout upgrade (Pieter Wuille)
Pull request description:
It seems that LevelDB tends to leave the old "per txid" UTXO entries in the database lying around for a significant amount of time during and after the per-txout upgrade. This introduces a `CompactRange` function in the database wrapper, and invokes it after every batch of updates in `CCoinsViewDB::Upgrade()`. This lowers temporary disk usage during and after the upgrade.
Tree-SHA512: fbf964c0a33f4e73709c999c8a2bfdef974779c15820907398a2f8828f5fa3e4e153ddd9031d6fc5083be81e22b999b9bd826fd063ad8b88f55c5e8342503290
c0025d0 Fix segfault when shutting down before fully loading (Matt Corallo)
1385697 Order chainstate init more logically. (Matt Corallo)
ff3a219 Call RewindBlockIndex even if we're about to run -reindex-chainstate (Matt Corallo)
b0f3249 More user-friendly error message if UTXO DB runs ahead of block DB (Matt Corallo)
eda888e Fix some LoadChainTip-related init-order bugs. (Matt Corallo)
Pull request description:
This does a number of things to clean up chainstate init order,
fixing some issues as it goes:
* Order chainstate init more logically - first all of the
blocktree-related loading, then coinsdb, then
pcoinsTip/chainActive. Only create objects as needed.
* More clearly document exactly what is and isn't called in
-reindex and -reindex-chainstate both with comments noting
calls as no-ops and by adding if guards.
* Move the writing of fTxIndex to LoadBlockIndex - this fixes a
bug introduced in d6af06d68a where
InitBlockIndex was writing to fTxIndex which had not yet been
checked (because LoadChainTip hadn't yet initialized the
chainActive, which would otherwise have resulted in
InitBlockIndex being a NOP), allowing you to modify -txindex
without reindex, potentially corrupting your chainstate!
* Rename InitBlockIndex to LoadGenesisBlock, which is now a more
natural name for it. Also check mapBlockIndex instead of
chainActive, fixing a bug where we'd write the genesis block out
on every start.
* Move LoadGenesisBlock further down in init. This is a more logical
location for it, as it is after all of the blockindex-related
loading and checking, but before any of the UTXO-related loading
and checking.
* Give LoadChainTip a return value - allowing it to indicate that
the UTXO DB ran ahead of the block DB. This just provides a nicer
error message instead of the previous mysterious
assert(!setBlockIndexCandidates.empty()) error.
* Calls ActivateBestChain in case we just loaded the genesis
block in LoadChainTip, avoiding relying on the ActivateBestChain
in ThreadImport before continuing init process.
* Move all of the VerifyDB()-related stuff into a -reindex +
-reindex-chainstate if guard. It couldn't do anything useful
as chainActive.Tip() would be null at this point anyway.
Tree-SHA512: 3c96ee7ed44f4130bee3479a40c5cd99a619fda5e309c26d60b54feab9f6ec60fabab8cf47a049c9cf15e88999b2edb7f16cbe6819e97273560b201a89d90762
Instead of using ismine to check whether an address can be spent by us,
make the witness version of the script or address first and then use
ProduceSignature with the DummySignatureCreator to check if we can
solve for the script.
Also fixes test cases to reflect this change.
* Order chainstate init more logically - first all of the
blocktree-related loading, then coinsdb, then
pcoinsTip/chainActive. Only create objects as needed.
* More clearly document exactly what is and isn't called in
-reindex and -reindex-chainstate both with comments noting
calls as no-ops and by adding if guards.
* Move LoadGenesisBlock further down in init. This is a more logical
location for it, as it is after all of the blockindex-related
loading and checking, but before any of the UTXO-related loading
and checking.
* Move all of the VerifyDB()-related stuff into a -reindex +
-reindex-chainstate if guard. It couldn't do anything useful
as chainActive.Tip() would be null at this point anyway.
RewindBlockIndex works over both chainActive - disconnecting blocks
from the tip that need witness verification - and mapBlockIndex -
requiring redownload of blocks missing witness data.
It should never have been the case that the second half is skipped
if we're about to run -reindex-chainstate.
This gives LoadChainTip a return value - allowing it to indicate that
the UTXO DB ran ahead of the block DB. This just provides a nicer
error message instead of the previous mysterious
assert(!setBlockIndexCandidates.empty()) error.
This also calls ActivateBestChain in case we just loaded the genesis
block in LoadChainTip, avoiding relying on the ActivateBestChain
in ThreadImport before continuing init process.
* Move the writing of fTxIndex to LoadBlockIndex - this fixes a
bug introduced in d6af06d68a where
InitBlockIndex was writing to fTxIndex which had not yet been
checked (because LoadChainTip hadn't yet initialized the
chainActive, which would otherwise have resulted in
InitBlockIndex being a NOP), allowing you to modify -txindex
without reindex, potentially corrupting your chainstate!
* Rename InitBlockIndex to LoadGenesisBlock, which is now a more
natural name for it. Also check mapBlockIndex instead of
chainActive, fixing a bug where we'd write the genesis block out
on every start.
df389bc Change wallet method disabled error text (Russell Yanofsky)
e526b3d Fix misleading "Method not found" multiwallet errors (Russell Yanofsky)
Pull request description:
Raise RPC_WALLET_NOT_SPECIFIED instead of RPC_METHOD_NOT_FOUND when a required
wallet filename was not specified in an RPC call.
Also raise more specific RPC_WALLET_NOT_FOUND error instead of
RPC_INVALID_PARAMETER in case an invalid wallet was specified, for consistency.
Tree-SHA512: 6a8d885283f69bcfc28f2e08ac03eff02f9f8160a312ce2a90d868aa52533434fc0b4c4ab86547c2f09392338956df915637eaf7136a4fc105e6c8179f2d0ac8
72f0060 Replace traditional for with ranged for in primitives (Dag Robole)
Pull request description:
Replace traditional for with ranged for in block and transaction primitives to improve readability
Tree-SHA512: c0fff603d2939149ca48b6aa72b59738a3658d49bd58b2d4ffbc85bdb774d8d5bb808fe526fe22bb9eb214de632834d373e2aab44f6019a83c0b09440cea6528
f228b8e remove some unused functions (Marko Bencun)
Pull request description:
Identified with `cppcheck --enable=unusedFunction .`.
- GetSendBufferSize()'s last use removed in
991955e
- SetPort()'s last use removed in
7e195e8
- GetfLargeWorkInvalidChainFound() was introduced in
e3ba0ef and never used
Tree-SHA512: ea8e5498bec981e42e1342c171c37723c2f5e575c7d6c1a524d9c6cd9b332bdd0d84fddf9e14ca011bb49fb82bd037386382c9afc546b3c2231ae548358bd4f4
065039d [tests] Fix incorrect memory_cleanse(…) call in crypto_tests.cpp (practicalswift)
Pull request description:
`chKey` and `chIV` are pointers, not arrays :-)
Probably the result of copy-pasting of old code where the code was operating on arrays instead of pointers.
If I'm reading the code correctly the absence/presence of these `memory_cleanse(…)` calls won't alter the outcome of the test in question (`TestPassphraseSingle`) even if fixed. Therefore removing.
Tree-SHA512: a053b2817bedf6ef889744e546ce9a0f165dee94aef6850d9d6a6bb05b0018789597371ecf154a4aec8588c0ef5626ef08c23c35e35927f6b0497b5f086146fe
a2420ae Avoid unnecessary work in SetNetworkActive (João Barbosa)
Pull request description:
This PR adds an early return to avoid unnecessary notifications when the status doesn't change.
Tree-SHA512: 85d05ca6fa36cb581f94bc154d08bd72cd53f6a857173c6fb2f184058f9c0208c4cf5e5d196825a78339902d8f256688eb6793f99abc7be9c7cfac85136180d9
Raise RPC_WALLET_NOT_SPECIFIED instead of RPC_METHOD_NOT_FOUND when a required
wallet filename was not specified in an RPC call.
Also raise more specific RPC_WALLET_NOT_FOUND error instead of
RPC_INVALID_PARAMETER in case an invalid wallet was specified, for consistency.
095b917 Avoid using sizes on non-fixed-width types to derive protocol constants. (Gregory Maxwell)
Pull request description:
Thanks to awemany for pointing this out.
This replaces #10172 which appears to be abandoned, but uses the constants as requested on that PR.
Tree-SHA512: 032c0d75b3aaf807a7d0c7fb8ff5515acc45ad58bd00fe81413f900fe02bad900534a970403b9bb568e132c9eddea6043e958daf625e8acc84375bd41ee2e2ef
9f8a46f Properly document target_confirmations in listsinceblock (Ryan Havar)
Pull request description:
There seems to be some misunderstandings about this, but it's a heavily used function so I'd like to make sure the docs are clear about how it works.
For a later issue:
* Change the default of target_confirmations to 6 (1 is a pretty silly default)
* Change the name of target_confirmations (it's really a horrible name)
Tree-SHA512: a2fba2fab30019cea9db56cd7e31de95ba31090617ab336bdf130f9591bfcf3fc5fbd9e7e1e40b6c7bd2f74b9b4658afb1fdc7fc44e1f79520d1319758982a1c
a56f8b0 Add missing lock in CScheduler::AreThreadsServicingQueue() (Matt Corallo)
Pull request description:
Not an actual bug as this is only used in asserts right now, but
nice to not have a missing lock.
Tree-SHA512: 7e542b150a0be716783e196493d239f2ad15e5376abf54b67d735dc3ef1b10849c090337b849f530c9f7497ddcfb8389b47d64a5dcf6382b7d38838f88cc1100
0be03c7 Qt: Use _putenv_s instead of setenv on Windows builds (Brian McMichael)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/10836
Error message I would get on `make`:
```
...
CXXLD bench/bench_bitcoin.exe
OBJCXXLD qt/bitcoin-qt.exe
qt/test/test_main.cpp: In function ‘int main(int, char**)’:
qt/test/test_main.cpp:64:43: error: ‘setenv’ was not declared in this scope
setenv("QT_QPA_PLATFORM", "minimal", 0);
^
make[2]: *** [qt/test/qt_test_test_bitcoin_qt-test_main.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[2]: Leaving directory `/home/bmcmichael/Projects/bcoin/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/bmcmichael/Projects/bcoin/src'
make: *** [all-recursive] Error 1
```
`setenv` function is not available from the Microsoft runtime library. Need to use `_putenv_s` instead.
This solution tells the compiler to use `_putenv_s` on `WIN32` compilation (Note: this also works on 64-bit Windows instances.) and `setenv` everywhere else.
I've tested builds on Windows 10 x64 and Ubuntu 16.04 with this code.
Tree-SHA512: d53c996c890e3c6f22b4f2dcca718bef9168f19a6d4a29b8ff13391bfc0c8ea9c1cd16782b47c25b156dcbdff18bb19e23bfd5f6fefb1f373c9d5454a13fc969
99c7fc3 Prevent user from specifying conflicting parameters to fundrawtx (Matt Corallo)
Pull request description:
estimate_mode/conf_target both are overridden by feeRate, so should
not be specified together with feeRate.
Based on #10706
Tree-SHA512: 8ccd08575fd1f2a0d45112538ffbbc73983ee172963230b0cc7ac41d13c6f3c740917f82b212c41ded3a64d873452e7f2c7af49f3b47cab897f8e85117f21333
This assures that we don't overwrite a random file called
`wallet.backup` that happens to be in the current directory. It also
assures that the temporary file will be cleaned up.
Noticed by Evan Klitzke, came up in discussion here:
https://github.com/bitcoin/bitcoin/pull/10880#discussion_r128460722
9737572 [Qt] Use wallet 0 in rpc console if running with multiple wallets (Jonas Schnelli)
Pull request description:
Current master with multiwallet results in accessing wallet 0 in QT (send / receive / tx history / etc.), **but** the RPC console cannot access that wallet (only non-wallet commands work).
This is a quick solution to re-allow accessing the same wallet (Index 0) via RPC console in multiwallet.
The solutions design is not "state of the art" (should go over WalletModel). Ideally we work on an overall multiwallet support for the GUI (which then would remove this change).
I think we should consider this as a bugfix.
Tree-SHA512: 16cf844662248ffd3d82c7d0cbe5879f231fbc7d4f5a4aab4180a9087018519c98301e4ac311eaec2cc39dddf25d3edf9be99a6622ea682c138a820a9b21fd0c
a5ecaf1 Fix misspellings and remove safety verbiage (Steven D. Lander)
Pull request description:
Standardizing punctuation on CLI output and also including a few fixes for grammer. This PR is for text only changes and includes no code edits.
Tree-SHA512: afde551bf1212838822188b6723f2bf1b7222decfa1cd7aa6b04967489108a29f80833af6059252af028c53437755f258275af0614e0d4d0311e09421cd8e131
05e023f Move CloseSocket out of SetSocketNonBlocking and pass SOCKET by const reference in SetSocket* functions (Dag Robole)
Pull request description:
Rationale:
Readability, SetSocketNonBlocking does what it says on the tin.
Consistency, More consistent with the rest of the API in this unit.
Reusability, SetSocketNonBlocking can also be used by clients that may not want to close the socket on failure.
This also moves the responsibility of closing the socket back to the caller that opened it, which in general should know better how and when to close it.
Tree-SHA512: 85027137f1b626e2b636549ee38cc757a587adcf464c84be6e65ca16e3b75d7ed1a1b21dd70dbe34c7c5d599af39e53b89932dfe3c74f91a22341ff3af5ea80a
876e92b Testing: listsinceblock should display all transactions that were affected since the given block, including transactions that were removed due to a reorg. (Karl-Johan Alm)
f999c46 listsinceblock: optionally find and list any transactions that were undone due to reorg when requesting a non-main chain block in a new 'removed' array. (Karl-Johan Alm)
Pull request description:
The following scenario will not notify the caller of the fact `tx0` has been dropped:
1. User 1 receives BTC in tx0 from utxo1 in block aa1.
2. User 2 receives BTC in tx1 from utxo1 (same) in block bb1
3. User 1 sees 2 confirmations at block aa3.
4. Reorg into bb chain.
5. User 1 asks `listsinceblock aa3` and does not see that tx0 is now invalidated.
See `listsinceblock.py` commit for related test.
The proposed fix is to iterate from the given block down to the fork point, and to check each transaction in the blocks against the wallet, in addition to including all transactions from the fork point to the active chain tip (the current behavior). Any transactions that were present will now also be listed in the `listsinceblock` output in a new `replaced` array. This operation may be a bit heavy but the circumstances (and perceived frequency of occurrence) warrant it, I believe.
Example output:
```Python
{
'transactions': [],
'replaced': [
{
'walletconflicts': [],
'vout': 1,
'account': '',
'timereceived': 1485234857,
'time': 1485234857,
'amount': '1.00000000',
'bip125-replaceable': 'unknown',
'trusted': False,
'category': 'receive',
'txid': 'ce673859a30dee1d2ebdb3c05f2eea7b1da54baf68f93bb8bfe37c5f09ed22ff',
'address': 'miqEt4kWp9zSizwGGuUWLAmxEcTW9bFUnQ',
'label': '',
'confirmations': -7
}
],
'lastblock': '7a388f27d09e3699102a4ebf81597d974fc4c72093eeaa02adffbbf7527f6715'
}
```
I believe this addresses the comment by @luke-jr in https://github.com/bitcoin/bitcoin/pull/9516#issuecomment-274190081 but I could be wrong..
Tree-SHA512: 607b5dcaeccb9dc0d963d3de138c40490f3e923050b29821e6bd513d26beb587bddc748fbb194503fe618cfe34a6ed65d95e8d9c5764a882b6c5f976520cff35
Identified with `cppcheck --enable=unusedFunction .`.
- GetSendBufferSize()'s last use removed in
991955ee81
- SetPort()'s last use removed in
7e195e8459
- GetfLargeWorkInvalidChainFound() was introduced in
e3ba0ef956 and never used
This commit adds a listwallets RPC, which lists the names of the
currently loaded wallets. This command intentionally shows no
information about the wallet other then the name. Information on
individual wallets can be obtained using the getwalletinfo RPC.
6b8d872 Protect SSE4 code behind a compile-time flag (Pieter Wuille)
fa9be90 Add selftest for SHA256 transform (Pieter Wuille)
c1ccb15 Add SSE4 based SHA256 (Pieter Wuille)
2991c91 Add SHA256 dispatcher (Pieter Wuille)
4d50f38 Support multi-block SHA256 transforms (Pieter Wuille)
Pull request description:
This adds an SSE4 assembly version of the SHA256 transform by Intel, and uses it at run time if SSE4 instructions are available, and use a fallback C++ implementation otherwise. Nearly every x86_64 CPU supports SSE4. The feature is only enabled when compiled with `--enable-experimental-asm`.
In order to avoid build dependencies and other complications, the original Intel YASM code was translated to GCC extended asm syntax.
This gives around a 50% speedup on the SHA256 benchmark for me.
It is based on an earlier patch by @laanwj, though only includes a single assembly version (for now), and removes the YASM dependency.
Tree-SHA512: d31c50695ceb45264291537b93c0d7497670be38edf021ca5402eaa7d4e1e0e1ae492326e28d4e93979d066168129e62d1825e0384b1b906d36f85d93dfcb43c
d9d1bd3 nCheckDepth chain height fix (romanornr)
Pull request description:
````
if (nCheckDepth <= 0)
nCheckDepth = 1000000000; // suffices until the year 19000
if (nCheckDepth > chainActive.Height())
nCheckDepth = chainActive.Height();
````
These lines confuse me.
Correct me if I am wrong, but we can't check any more blocks than we have right?
If someone requests <= 0 it get set it into some huge number and then immediately limit it to the chain height in the following statement.
````
if (nCheckDepth > chainActive.Height())
nCheckDepth = chainActive.Height();
````
when using ````--checkblocks=Z```` When Z is ````0```` or any other negative number, it will check all blocks.
I think it should be changed to this maybe.
````
if (nCheckDepth <= 0 || nCheckDepth > chainActive.Height())
nCheckDepth = chainActive.Height();
````
Which gets rid of that huge number which is confusing for any other altcoins that have a different block time.
Tree-SHA512: 8ee0ae5f33b399fa74dc16926709694ccfe1fc8a043cba2f5d00884220ac1b9b13f2df4588041f4133be634e5c7b14f4eebe24294028dafe91581a97dbe627f3
4dc1915 check for null values in rpc args and handle appropriately (Gregory Sanders)
999ef20 importmulti options are optional (Gregory Sanders)
a70d025 fixup some rpc param counting for rpc help (Gregory Sanders)
Pull request description:
Audited where named args will fail to use correct default values or may fail when additional optional arguments are added.
Previously for these parameters, it was fine to omit them as positional arguments, but it would trigger UniValue runtime errors to set them to null, or to omit them while passing named parameters with greater positions (which would internally set earlier missing arguments to null). Now null values are treated the same as missing values so these errors do not occur.
Included a few other small fixes while working on it.
I didn't bother fixing account-based rpc calls.
Tree-SHA512: 8baf781a35bd48de7878d4726850a580dab80323d3416c1c146b4fa9062f8a233c03f37e8ae3f3159e9d04a8f39c326627ca64c14e1cb7ce72538f934ab2ae1e
6b4f231 Move transaction combining from signrawtransaction to new RPC (Andrew Chow)
Pull request description:
Create a combinerawtransaction RPC which accepts a json array of hex raw transactions to combine them into one transaction. Signrawtransaction is changed to no longer combine transactions and only accept one transaction at a time.
The tests have been updated to test this. Tests for the signrawtransaction merge have also been removed.
This is part of #10570
Tree-SHA512: 035aebbd6537c1c017d5c8e06d309228b4c23fe52d5b31ffde19741c81a11a6346ddbbdc582b77b02a47f4c22b1952b69d3c2ee1109c29b3f0f1b612d8de53ed
1c9b818 getinfo deprecation warning (Andrew Chow)
Pull request description:
This is an alternative to #10841
This PR implements @gmaxwell's suggestion of a `nag` field for getinfo which warns about the deprecation. Instead of calling it `nag`, I have named it `deprecation-warning`. The output of `getinfo` will look like this:
```
{
"version": 149900,
"protocolversion": 70015,
"walletversion": 139900,
"balance": 0.00000000,
"blocks": 476281,
"timeoffset": 0,
"connections": 2,
"proxy": "",
"difficulty": 804525194568.1318,
"testnet": false,
"keypoololdest": 1496858803,
"keypoolsize": 197,
"unlocked_until": 0,
"paytxfee": 0.00000000,
"relayfee": 0.00001000,
"errors": "This is a pre-release test build - use at your own risk - do not use for mining or merchant applications",
"deprecation-warning": "WARNING: getinfo is deprecated and will be fully removed in 0.16. Projects should transition to using getblockchaininfo, getnetworkinfo, and getwalletinfo before upgrading to 0.16"
}
```
I think this should be tagged for 0.15
Tree-SHA512: ea1bac96a67f797519e8748ddd661cf0a1127cbc38f145b98f10cf9b54dcf0519b353062ce9888e1f51875497299c75ff5147566944451bc3fc117620e773489
f4d00e6 Add a discard_rate (Alex Morcos)
b138585 Remove factor of 3 from definition of dust. (Alex Morcos)
Pull request description:
The definition of dust is redefined to remove the factor of 3.
Dust is redefined to be the value of an output such that it would
cost that value in fees to (create and) spend the output at the dust
relay rate. The previous definition was that it would cost 1/3 of the
value. The default dust relay rate is correspondingly increased to
3000 sat/kB so the actual default dust output value of 546 satoshis
for a non-segwit output remains unchanged. This commit is a refactor
only unless a dustrelayfee is passed on the commandline in which case
that number now needs to be increased by a factor of 3 to get the same
behavior. -dustrelayfee is a hidden command line option.
Note: It's not exactly a refactor due to edge case changes in rounding
as evidenced by the required change to the unit test.
A discard_rate is added which defaults to 10,000 sat/kB
Any change output which would be dust at the discard_rate you are
willing to discard completely and add to fee (as well as continuing to
pay the fee that would have been needed for creating the change)
This would be a nice addition for 0.15 and I think will remain useful for 0.16 with the new coin selection algorithms in discussion, but its not crucial.
It does add translation strings, but we could (should?) avoid that by hiding the option
Tree-SHA512: 5b6f655354d0ab6b8b6cac1e8d1fe3136d10beb15c6d948fb15bfb105155a9d03684c6240624039b3eed6428b7e60e54216cc8b2f90c4600701e39f646284a9b
e0d459264 Avoid redundant redeclaration of GetWarnings(const string&) (practicalswift)
Pull request description:
Avoid redundant redeclaration of `GetWarnings(const string&)`.
`std::string GetWarnings(const std::string& strFor)` is declared in `warnings.h` and defined in `warnings.cpp`.
Tree-SHA512: d1503e00a2073cf080d66eafa303dc9c660a7ac15d4d2abcf2e4aa69cf9622d89a8e3f09324139bb7b8debaa6d1ee4a1c1681d347cebd99b1d3672a4da6d1ace
Create a combinerawtransaction RPC which accepts a json array of hex raw
transactions to combine them into one transaction. Signrawtransaction is changed
to no longer combine transactions and only accept one transaction at a time.
cf82a9e Do not allow users to get keys from keypool without reserving them (Matt Corallo)
Pull request description:
fundrawtransaction allows users to add a change output and then
not have it removed from keypool. While it would be nice to have
users follow the normal CreateTransaction/CommitTransaction process
we use internally, there isnt much benefit in exposing this option,
especially with HD wallets, while there is ample room for users to
misunderstand or misuse this option.
This partially reverts #9377. Would be nice to get this for 15 since its kinda crazy we have this option to begin with IMO, will need release notes as an RPC option is now ignored.
Tree-SHA512: 72b5ee9c4a229b84d799dfb00c56fe80d8bba914ce81a433c3f5ab325bf9bf2b839ee658c261734f0ee183ab19435039481014d09c41dbe155e6323e63beb01d
fundrawtransaction allows users to add a change output and then
not have it removed from keypool. While it would be nice to have
users follow the normal CreateTransaction/CommitTransaction process
we use internally, there isnt much benefit in exposing this option,
especially with HD wallets, while there is ample room for users to
misunderstand or misuse this option.
This could be particularly nasty in some use-cases (especially
pre-HD-split) - eg a user might fundrawtransaction, then call
getnewaddress, hand out the address for someone to pay them, then
sendrawtransaction. This may result in the user thinking they have
received payment, even though it was really just their own change!
This could obviously result in needless key-reuse.
6b9faf7 [QA] add basic multiwallet test (Jonas Schnelli)
979d0b8 [tests] [wallet] Add wallet endpoint support to authproxy (John Newbery)
76603b1 Select wallet based on the given endpoint (Jonas Schnelli)
32c9710 Fix test_bitcoin circular dependency issue (Jonas Schnelli)
31e0720 Add wallet endpoint support to bitcoin-cli (-usewallet) (Jonas Schnelli)
dd2185c Register wallet endpoint (Jonas Schnelli)
Pull request description:
Alternative for #10829 and #10650.
It adds the most simplest form of wallet based endpoint support (`/wallet/<filename>`).
No v1 and no node/wallet endpoint split.
Tree-SHA512: 23de1fd2f9b48d94682928b582fb6909e16ca507c2ee19e1f989d5a4f3aa706194c4b1fe8854d1d79ba531b7092434239776cae1ae715ff536e829424f59f9be
1fc8c3d No longer ever reuse keypool indexes (Matt Corallo)
Pull request description:
This fixes an issue where you could reserve a keypool entry, then
top up the keypool, writing out a new key at the given index, then
return they key from the pool. This isnt likely to cause issues,
but given there is no reason to ever re-use keypool indexes
(they're 64 bits...), best to avoid it alltogether.
Builds on #10235, should probably get a 15 tag.
Tree-SHA512: c13a18a90f1076fb74307f2d64e9d80149811524c6bda259698ff2c65adaf8c6c3f2a3a07a5f4bf03251bc942ba8f5fd33a4427aa4256748c40b062991682caf
077d01f random: only use getentropy on openbsd (Cory Fields)
Pull request description:
Follow-up from #10335. I can confirm that this fixes my issue when building against a new glibc + old linux headers for back-compat.
Tree-SHA512: a0fcf26995fbd3636f970e729a172c6e1d7c0de371e703f0653cd9776600f438ec43acd2b1eb92f2678a011968da8fbbeef8a54599434851f4c6ffe78291c172
06bcdb8da Convert named argument from nblocks to conf_target (Alex Morcos)
439c4e8ad Improve api to estimatesmartfee (Alex Morcos)
Pull request description:
Through 0.14 branch, the estimatesmartfee API was tagged "WARNING: This interface is unstable and may disappear or change!" and this warning is removed for 0.15, so any wanted API updates should happen now.
The changes here are to make the additional parameter for conservative estimates a more general estimate_mode string , to omit the feerate and include an error string instead of returning -1 on error, and to do better parameter checking initially.
~It is only the last 2 commits, but it's built on #10706 and #10543~.
See https://github.com/bitcoin/bitcoin/pull/10707#issuecomment-314869251 for renaming of nblocks argument to conf_target. Will need to be included before string freeze.
PR description edited for clarity
Tree-SHA512: 6d8ebee8bb410e2950ffd59663eebfed8d1611d995dc935bb91e430d9da7e2f306796f45631458376027d26341c660f09e825e61748103d2f2736ec6dc3df3ae
8276e70de Adding assert to avoid a memory access violation inside of PartialMerkleTree::CalcHash() (Chris Stewart)
Pull request description:
Fixing a possible memory access violation in CPartialMerkleTree::CalcHash().
This can happen if we some how a merkle tree with zero txids. I don't think this can happen in practice as we only send merkle block messages on the p2p network as of now -- we cannot receive them.
This was found with #8469, specifically using this [generator](https://github.com/Christewart/bitcoin/blob/rapidcheck/src/test/gen/merkleblock_gen.h#L52-L77) which will cause a memory access violation on [this test case](https://github.com/Christewart/bitcoin/blob/rapidcheck/src/test/merkleblock_properties.cpp#L48).
Tree-SHA512: b95904ec45ea3f082c7722161d93ee06b24c706fbffa909a6e995ed14788aed2830f91b626da6f0347660c45874a0735dab61c9440b59c949c690af4165c83fb
Any change output which would be dust at the discard_rate you are
willing to discard completely and add to fee (as well as continuing to
pay the fee that would have been needed for creating the change).
This fixes an issue where you could reserve a keypool entry, then
top up the keypool, writing out a new key at the given index, then
return they key from the pool. This isnt likely to cause issues,
but given there is no reason to ever re-use keypool indexes
(they're 64 bits...), best to avoid it alltogether.
b0e8e2d Print one log message per keypool top-up, not one per key. (Gregory Maxwell)
41dc163 Increase wallet default keypool size to 1000. (Gregory Maxwell)
30d8f3a Pushdown walletdb though CWallet::AddKeyPubKey to avoid flushes. (Gregory Maxwell)
3a53f19 Pushdown walletdb object through GenerateNewKey/DeriveNewChildKey. (Gregory Maxwell)
Pull request description:
This carries the walletdb object from top-up through GenerateNewKey/DeriveNewChildKey/CWallet::AddKeyPubKey, which allows us to avoid the flush on destruction until the top up finishes instead of flushing the wallet for every key.
This speeds up adding keys by well over 10x on my laptop (actually something like 17x), I wouldn't be surprised if it were an even bigger speedup on spinning rust.
Then it increases the keypool size to 1000. I would have preferred to use 10,000 but in the case where the user creates a new wallet and then turns on encryption it seems kind of dumb to have >400KB of marked-used born unencrypted keys just laying around.
(Thanks to Matt for cluesticking me on how to bypass the crypter spaghetti)
Tree-SHA512: 868303de38fce4c3f67d7fe133f765f15435c94b39d252d7450b5fee5c607a3cc2f5e531861a69d8c8877bf130e0ff4c539f97500a6bc0ff6d67e4a42c9385c7
dba485d init: Factor out AppInitLockDataDirectory (Wladimir J. van der Laan)
Pull request description:
Alternative to #10818, alternative solution to #10815.
After this change: All the AppInit steps before and inclusive AppInitLockDataDirectory must not have Shutdown() called in case of failure. Only when AppInitMain fails, Shutdown should be called.
Changes the GUI and bitcoind code to consistently do this.
Tree-SHA512: 393e1a0ae05eb8e791025069e3ac4f6f3cdeb459ec63feda85d01cf6696ab3fed7632b6a0ac3641b8c7015af51d46756b5bba77f5e5f0c446f0c2dea58bbc92e
Change parameter for conservative estimates to be an estimate_mode string.
Change to never return a -1 for failure but to instead omit the feerate and
return an error string. Throw JSONRPC error on invalid nblocks parameter.
Alternative to #10818, alternative solution to #10815.
After this change: All the AppInit steps before and inclusive
AppInitLockDataDirectory must not have Shutdown() called in case of
failure. Only when AppInitMain fails, Shutdown should be called.
Changes the GUI and bitcoind code to consistently do this.
This redefines dust to be the value of an output such that it would
cost that value in fees to (create and) spend the output at the dust
relay rate. The previous definition was that it would cost 1/3 of the
value. The default dust relay rate is correspondingly increased to
3000 sat/kB so the actual default dust output value of 546 satoshis
for a non-segwit output remains unchanged. This commit is a refactor
only unless a dustrelayfee is passed on the commandline in which case
that number now needs to be increased by a factor of 3 to get the same
behavior. -dustrelayfee is a hidden command line option.
Note: It's not exactly a refactor due to edge case changes in rounding
as evidenced by the required change to the unit test.
11590d3 Properly bound check conf_target in wallet RPC calls (Alex Morcos)
fd29d3d Remove checking of mempool min fee from estimateSmartFee. (Alex Morcos)
2fffaa9 Make QT fee displays use GetMinimumFee instead of estimateSmartFee (Alex Morcos)
1983ca6 Use CoinControl to pass custom fee setting from QT. (Alex Morcos)
03ee701 Refactor to use CoinControl in GetMinimumFee and FeeBumper (Alex Morcos)
ecd81df Make CoinControl a required argument to CreateTransaction (Alex Morcos)
Pull request description:
This builds on #10589 (first 5 commits from that PR, last 5 commits are new)
The first couple commits refactor to use the CCoinControl class to pass fee calculation parameters around.
This allows for fixing the buggy interaction in QT between the global payTxFee which can be modified by the RPC call settxfee or temporarily modified by the QT custom fee settings. Before these changes the GUI could sometimes send a transaction with a recently set payTxFee and not respect the settings displayed in the GUI. After these changes, using the GUI does not involve the global transaction confirm target or payTxFee.
The prospective fee displays in the smart fee slider and the coin control dialog are changed to use the fee calculation from GetMinimumFee, this simplifies the code and makes them slightly more correct in edge cases.
Maxing the fee calculation with the mempool min fee is move from estimateSmartFee to GetMinimumFee.
This fixes a long standing bug, and should be tagged for 0.15 as it is holding up finalizing the estimatesmartfee RPC API before release.
Tree-SHA512: 4d36a1bd5934aa62f3806d380fcafbef73e9fe5bdf190fc5259a3e3a13349e5ce796e50e7068c46dc630ccf56d061bce5804f0bfe2e082bb01ca725b63efd4c1
4c3b538 [logs] fix zapwallettxes startup logs (John Newbery)
e7a2181 [wallet] fix zapwallettxes interaction with persistent mempool (John Newbery)
ff7365e [tests] fix flake8 warnings in zapwallettxes.py (John Newbery)
Pull request description:
zapwallettxes previously did not interact well with persistent mempool.
zapwallettxes would cause wallet transactions to be zapped, but they
would then be reloaded from the mempool on startup. This commit softsets
persistmempool to false if zapwallettxes is enabled so transactions are
actually zapped.
This PR also fixes the zapwallettxes.py functional test, which did not properly test this feature. The test line:
```py
assert_raises(JSONRPCException, self.nodes[0].gettransaction, [txid3])
#there must be a expection because the unconfirmed wallettx0 must be gone by now
```
is not actually testing the presence of the transaction since the RPC is being called incorrectly (with an array instead of a string). The `assert_raises()` passes since an assert is raised, but it's not the one the test writer had in mind!
Fixes#9710 .
Tree-SHA512: e3236efc7a2fd2b3bf1d9e2e8a7726d470c57f5d95cf41b7bde264edc8817bd36a6f3feff52f8de8db0ef64b7247c88b24e7ff7cefaa706cba86fe4e2135a508
5618b7d Do not shadow upper local variable `state`. (Pavel Janík)
Pull request description:
Tests added in #10192 emit few shadowing warnings:
```
test/txvalidationcache_tests.cpp:268:26: warning: declaration shadows a local variable [-Wshadow]
test/txvalidationcache_tests.cpp:296:26: warning: declaration shadows a local variable [-Wshadow]
test/txvalidationcache_tests.cpp:357:26: warning: declaration shadows a local variable [-Wshadow]
```
Remove shadowing declarations and reuse the upper local declaration as in other already present test cases.
Tree-SHA512: 1e3c52cf963f8f33e729900c8ecdcd5cc6fe28caa441ba53c4636df9cc3d1a351ca231966d36384589f1340ae8ddd447424c2ee3e8527d334d0412f0d1a10c8f
6835cb0ab Avoid static analyzer warnings regarding uninitialized arguments (practicalswift)
Pull request description:
Avoid static analyzer warnings regarding _"Function call argument is a pointer to uninitialized value"_ in cases where we are intentionally using such arguments.
This is achieved by using `f(b.begin(), b.end())` (`std::array<char, N>`) instead of `f(b, b + N)` (`char b[N]`).
Rationale:
* Reduce false positives by guiding static analyzers regarding our intentions.
Before this commit:
```shell
$ clang-tidy-3.5 -checks=* src/bench/base58.cpp
bench/base58.cpp:23:9: warning: Function call argument is a pointer to uninitialized value [clang-analyzer-core.CallAndMessage]
EncodeBase58(b, b + 32);
^
$ clang-tidy-3.5 -checks=* src/bench/verify_script.cpp
bench/verify_script.cpp:59:5: warning: Function call argument is a pointer to uninitialized value [clang-analyzer-core.CallAndMessage]
key.Set(vchKey, vchKey + 32, false);
^
$
```
After this commit:
```shell
$ clang-tidy-3.5 -checks=* src/bench/base58.cpp
$ clang-tidy-3.5 -checks=* src/bench/verify_script.cpp
$
```
Tree-SHA512: 5814a320ca8b959d0954bb64393424bcad73f942d2e988de1cd6788f39153b93900325532f2e340de02d740a3953385d212ae08e7ec72bb4c394a40475f251df
d0413c670 Use range based for loop (René Nyffenegger)
Pull request description:
Instead of iterating over 0 .. 1 and then deciding on an actual desired
value, use a range based for loop for the desired value.
Tree-SHA512: 0a7a4a80516c9f16cf97fa7d257088b8386360e19b93c4deac3d745b6270ea452c513821686d7d14a159a235763e034f9b14eef222ca15f7eb71c37bd1c2c380
d40a72ccb Clarify *(--.end()) iterator semantics in CWallet::TopUpKeyPool (Matt Corallo)
28301b978 Meet code style on lines changed in the previous commit (Matt Corallo)
4a3fc3562 Track keypool entries as internal vs external in memory (Matt Corallo)
Pull request description:
This is an alternative version of #10184. As @jonasschnelli points out there, the performance regressions are pretty minimal, but given that this is a pretty simple, mechanical change, its probably worth doing.
Tree-SHA512: e83f9ebf2998f8164d1b2eebe5e6dcdeadea8c30b7612861f830758c08bf4093cd6a67b3bcfa9cfcb139e5e0b106fc8898a975fc69f334981aefc756568ab613
5c643241e [utils] allow square brackets for ipv6 addresses in bitcoin-cli (John Newbery)
fe4fabaf1 [refactor] move SplitHostPort() into utilstrencodings (John Newbery)
Pull request description:
bitcoin-cli's `-rpcconnect` can accept ipv6 addresses (as long as the libevent version is new enough), but fails to parse ipv6 with square brackets. This PR makes `bitcoin-cli` parse ipv6 in square brackets correctly.
`bitcoin-cli -rpcconnect=[::1] <command>`
should now be equivalent to
`bitcoin-cli -rpcconnect=::1 <command>`
This is useful so the `bitcoin-cli` option can now be in the same format as the `bitcoind` option.
Doesn't include tests. I have a branch that fully tests `bitcoin-cli`, but that's queued behind several intermediate PRs.
- first commit moves `SplitHostPort()` from libbitcoin_common into libbitcoin_util
- second commit adds proper ipv6 parsing to bitcoin-cli
Tree-SHA512: 249d409f10360c989474283341f458cc97364a56a7d004ae6d5f13d8bffe3a51b5dc2484d42218848e2d42cd9c0b13a1b92e94ea19b209f7e91c875c208d8409
0aadc11fd Avoid dereference-of-casted-pointer (Pieter Wuille)
Pull request description:
And prefer a static_cast to the intended reference type.
Tree-SHA512: e83b20023a4dca6029b46f7040a8a6fd54e1b42112ec0c87c3c3b567ed641de97a9e2335b57a2efb075491f641e5b977bc226a474276bea0c3c3c71d8d6ac54d
zapwallettxes previously did not interact well with persistent mempool.
zapwallettxes would cause wallet transactions to be zapped, but they
would then be reloaded from the mempool on startup. This commit softsets
persistmempool to false if zapwallettxes is enabled so transactions are
actually zapped.
228987d84 getbalance example covers at least 6 confirms (Gregory Sanders)
Tree-SHA512: 328d60b007ee75d809f4d28a7d9e5537d3c1446bd30c4c2ae57c690b8e83f6287cbcd3d8c955e8ba07ab62e27f9d27497c55219ff14fd5af7759dec465673fa2
Avoid static analyzer warnings regarding "Function call argument
is a pointer to uninitialized value" in cases where we are
intentionally using such arguments.
This is achieved by using ...
`f(b.begin(), b.end())` (`std::array<char, N>`)
... instead of ...
`f(b, b + N)` (`char b[N]`)
Rationale:
* Reduce false positives by guiding static analyzers regarding our
intentions.
Before this commit:
```
$ clang-tidy-3.5 -checks=* src/bench/base58.cpp
bench/base58.cpp:23:9: warning: Function call argument is a pointer to uninitialized value [clang-analyzer-core.CallAndMessage]
EncodeBase58(b, b + 32);
^
$ clang-tidy-3.5 -checks=* src/bench/verify_script.cpp
bench/verify_script.cpp:59:5: warning: Function call argument is a pointer to uninitialized value [clang-analyzer-core.CallAndMessage]
key.Set(vchKey, vchKey + 32, false);
^
$
```
After this commit:
```
$ clang-tidy-3.5 -checks=* src/bench/base58.cpp
$ clang-tidy-3.5 -checks=* src/bench/verify_script.cpp
$
```
This check has been moved to the wallet logic GetMinimumFee. The rpc call to
estimatesmartfee will now no longer return a result maxed with the mempool min
fee, but automated fee calculations from the wallet will produce the same result
as before and coincontrol and sendcoins dialogs in the GUI will correctly
display the right prospective fee.
changes to policy/fees.cpp include a big whitespace indentation change.
Remove helper function (CalculateEstimateType) for determining whether
estimates should be conservative or not, now that this is only called
once from GetMinimumFee and incorporate the logic directly there.
This fixes buggy behavior where we were temporarily setting and unsetting the
global payTxFee when trying to send a transaction with a custom fee from the
GUI. The previous behavior was inconsistent depending on the order of using the
RPC call settxfee and clicking various radio buttons in the sendcoinsdialog.
The new behavior is that transactions sent with the GUI will always use either
the smartfee slider value or the custom fee set on the GUI and they will not
affect the global defaults which are only for RPC and initial GUI values.
2aef1f182 [Qt] migrate old fee slider value to new dropbown Always round up (conservative) (Jonas Schnelli)
bc1be90e3 [Qt] replace fee slider with a Dropdown, extend conf. targets (Jonas Schnelli)
Tree-SHA512: 53796cf0b434dd3db5d4680dbeb6231a7df8f15d88187178fd4db8917cd7fc60091ce2c1589fd93668fc94bb13f989aba5b7ef3792fa95ee1f9f21a15709e2d3
dd97a529a Properly forbid -salvagewallet and -zapwallettxes for multi wallet. (Alex Morcos)
Tree-SHA512: dcde8f854ae957b4d3af4bcf1b811e0b6e9b93602764f86499e46a28d304cd4ee93ba058c03f6ca74ccb60e1310c83e53b698c64d93e5503115377655b80d44d
Warning from gcc 7.1 is ./prevector.h:450:25: warning:
'*((void*)(&<anonymous>)+8).prevector<28, unsigned char>::_union.prevector<28, unsigned char>::direct_or_indirect::<anonymous>.prevector<28, unsigned char>::direct_or_indirect::<unnamed struct>::indirect'
may be used uninitialized in this function [-Wmaybe-uninitialized]
Some people keep thinking that MAX_BLOCK_BASE_SIZE is a separate
size limit from the weight limit when it fact it is superfluous,
and used in early tests before the witness data has been
validated or just to compute worst case sizes. The size checks
that use it would not behave any differently consensus wise
if they were eliminated completely.
Its correct value is not independently settable but is a function
of the weight limit and weight formula.
This patch just eliminates it and uses the scale factor as
required to compute the worse case constants.
It also moves the weight factor out of primitives into consensus,
which is a more logical place for it.
18bacec6c Make check to distinguish between orphan txs and old txs more efficient. (Alex Morcos)
Tree-SHA512: b6b4bad89aa561975dce7b68b2fdad5623af5ebcb9c38fd6a72b5f6d0544ed441df4865591ac018f7ae0df9b5c60820cb4d9e55664f5667c9268458df70fd554
d34d77a build: verify that the assembler can handle crc32 functions (Cory Fields)
Pull request description:
Also, enable crc32 even if -msse4.2 wasn't added by us, as long as it works. This allows custom flags (such as -march=native) to work as expected.
Addresses #10670.
Tree-SHA512: e1a41a87b078d270bc645814315b229ad9c16556a4d14fb66b27a65b28d0caf9bf324f8c1e221854992aa17f53466eece06faebbf74d59b3d4ff2e6db6c614a4
69a4339ef missing white space in function arg (Lawrence Nahum)
Pull request description:
Tree-SHA512: 94d832eca0b5429cf48c7c1d4489942b53182c5b7ad9f24264867e7631301173c23a48f7b2e8fd22ff1b3137bafacb3f9d4320f4df235668c9096aaefff7afe8
959dd8781 Avoid printing incorrect block indexing time due to uninitialized variable (practicalswift)
Tree-SHA512: a76e43c3ffa734ed5c7eadf363f345f268aa0e6ce775aba8f856fe3bbc82f240dc7c734c5ca3ac500a12eb41fae00623413e79f484d5acf809b6e400851d771d
Adding comment to assert in PartialMerkleTree::CalcHash()
Adding comment on CMerkleBlock indicating it calls something that contains an assert
Removing EOL whitespace
Due to the iterative process of selecting new coins in each loop a new fee is
calculated that needs to be met each time. In the typical case if the most
recent iteration of the loop produced a much smaller transaction and we have now
gathered inputs with too many fees, we can just reduce the change. However in
the case where there is no change output, it is possible to end up with a
transaction which drastically overpays fees. This commit addresses that case,
by creating a change output if the overpayment is large enough to support it,
this is accomplished by rerunning the transaction creation loop without
selecting new coins.
Thanks to instagibbs for working on this as well
5e3b7b5 Improve error reporting for estimaterawfee (Alex Morcos)
1fafd70 Add function to report highest estimate target tracked per horizon (Alex Morcos)
9c85b91 Change API to estimaterawfee (Alex Morcos)
Tree-SHA512: e624c6e7967e9e48abe49f5818bd674e5710e571cc093029d2f90d39fdfba3c1f30e83bf89f6dce97052b59a7d9636a64642ccfb26effd149c417d0afbed0c0b
That OP_NOP10 is the last executable opcode is a bit of a obscure trivia, and the MAX_OPCODE constant already exists. This merely standardizes use of MAX_OPCODE over OP_NOP10 where it makes sense and is more clear.
1f668b6 Expose if CScheduler is being serviced, assert its not in EmptyQueue (Matt Corallo)
3192975 Flush CValidationInterface callbacks prior to destruction (Matt Corallo)
08096bb Support more than one CScheduler thread for serial clients (Matt Corallo)
2fbf2db Add default arg to CScheduler to schedule() a callback now (Matt Corallo)
cda1429 Give CMainSignals a reference to the global scheduler (Matt Corallo)
3a19fed Make ValidationInterface signals-type-agnostic (Matt Corallo)
ff6a834 Use TestingSetup to DRY qt rpcnestedtests (Matt Corallo)
Tree-SHA512: fab91e34e30b080ed4d0a6d8c1214910e383c45440676e37be61d0bde6ae98d61e8903d22b846e95ba4e73a6ce788798350266feba246d8a2ab357e8523e4ac5
Add support for setting each of these attributes on a per RPC call basis to sendtoaddress, sendmany, fundrawtransaction (already had RBF), and bumpfee (already had RBF and conf target).
Note that the CScheduler thread cant be running at this point,
it has already been stopped with the rest of the init threadgroup.
Thus, just calling any remaining loose callbacks during Shutdown()
is sane.
This will be used by CValidationInterface soon.
This requires a bit of work as we need to ensure that most of our
callbacks happen in-order (to avoid synchronization issues in
wallet) - we keep our own internal queue and push things onto it,
scheduling a queue-draining function immediately upon new
callbacks.
9bbf600 Use method name from __func__ macro (darksh1ne)
Tree-SHA512: da6d0714f458b538189bbc2b53252ba353dcc1ef15fa780cb7f690a034b58ab0dbaa3a89f83f044c746241ee265a70fc092449f1cc7be4f190775423fbca5fc5
GetMinimumFee now passes the conservative argument into estimateSmartFee.
Call CalculateEstimateType(mode) before calling GetMinimumFee or estimateSmartFee to determine the value of this argument.
CCoinControl can now be used to control this mode.
73c942e Use "replaceable" instead of "rbfoptin" in bitcoin-tx. (Matt Corallo)
fb915d5 Use "replaceable" instead of "optIntoRbf" in fundrawtransaction. (Matt Corallo)
928c681 Use "replaceable" instead of "optintorbf" in createrawtransaction. (Matt Corallo)
Tree-SHA512: 8922451c00abb63aaa08b4a9e314e89c22233b32f207259fbc25367f7d5b67efbaccc7e2a4958c18611ad498da302296242860c7be965a0e996dcde3e89efa07
Use __func__ macro in std::runtime_exception to:
1. fix method name in CWalletTx::GetAvailableWatchOnlyCredit()
2. refactor CWalletTx::GetAvailableCredit()
(by hiding boost::signals stuff in the .cpp)
This allows us to give it a bit more intelligence as we move
forward, including routing some signals through CScheduler. While
the introduction of a "internals" pointer in the class is pretty
ugly, the fact that we no longer need to include boost/signals
directly from validationinterface.h is very much worth the loss.
ecb4fc382 fix typo in help text for removeprunedfunds (Akio Nakamura)
Tree-SHA512: 2603851f1ac90bc0b90ced6355b0056e4cb658303cb2cd03ee0827ed0053157ebb87de48076f4d4f556991bfdbdb65d0a68a8dbd275c501cee4c9b5746a9562b
2a96283 rpc: Update `generate` for developer notes (Wladimir J. van der Laan)
df7e2f0 rpc: Move the `generate` RPC call to rpcwallet (Wladimir J. van der Laan)
Tree-SHA512: ec658d6178f8435dc54b9d9c6dd59f873055a8ae0c3f177c02049d77b93107dd5fc17a1ff56d50f051810d52fdf306846eaba2ef4fc8d2a6cfa831f57a1045c4
Fixes:
init.cpp: In function ‘bool AppInitMain(boost::thread_group&, CScheduler&)’:
init.cpp:1499:56: warning: ‘nStart’ may be used uninitialized in this function [-Wmaybe-uninitialized]
LogPrintf(" block index %15dms\n", GetTimeMillis() - nStart);
^
542ce6e Report [CANCELLED] instead of [DONE] when shut down during txdb upgrade (Jonas Schnelli)
83fbea3 Report txdb upgrade not more often then every 10% (Jonas Schnelli)
06c5b6e Show txdb upgrade progress in debug log (Jonas Schnelli)
316fcb5 Allow to cancel the txdb upgrade via splashscreen callback (Jonas Schnelli)
ae09d45 Allow to shut down during txdb upgrade (Jonas Schnelli)
00cb69b [Qt] allow to execute a callback during splashscreen progress (Jonas Schnelli)
Tree-SHA512: 23190f23f441bfd60821e49f8b3698a6bef97eb0e0ee659328e4a7395769ecd1616420eacc38aa1fa0ff62b9de5f13a0098dc798cdec6bff649575cefebc0db2
This makes it possible to mine to any wallet when multi-wallet mode is added.
Solves the same problem as #10649, but IMO in a cleaner way.
It also gets rid of the circuitous `ScriptForMining` method on
`CValidationInterface`, which really doesn't belong there.
After this change it's still possible to mine without wallet through
`generatetoaddress`.
176c021 [qa] Test non-atomic chainstate writes (Suhas Daftuar)
d6af06d Dont create pcoinsTip until after ReplayBlocks. (Matt Corallo)
eaca1b7 Random db flush crash simulator (Pieter Wuille)
0580ee0 Adapt memory usage estimation for flushing (Pieter Wuille)
013a56a Non-atomic flushing using the blockchain as replay journal (Pieter Wuille)
b3a279c [MOVEONLY] Move LastCommonAncestor to chain (Pieter Wuille)
Tree-SHA512: 47ccc62303f9075c44d2a914be75bd6969ff881a857a2ff1227f05ec7def6f4c71c46680c5a28cb150c814999526797dc05cf2701fde1369c06169f46eccddee
aa95947 Use the override specifier (C++11) where we expect to be overriding the virtual function of a base class (practicalswift)
Tree-SHA512: 3835e9b4ceaa4b2db485a25dfa3e5fe50c2e3ecb22ca9d5331aed7728aa496d4378fb84c0a1a3c47b0adecc10a00bca99cc239cbaf94cf2ce5b4cda497db6023
Check that cached script execution results are only valid for the same
script flags; that script execution checks are returned for non-cached
transactions; and that cached results are only valid for transactions
with the same witness hash.
Checking for the existence in the CCoinsViewCache of the outputs of a new tx
will result in a disk hit for every output since they will not be found. On the
other hand if those outputs exist already, then the inputs must also have been
missing, so we can move this check inside the input existence check so in the
common case of a new tx it doesn't need to run.
The purpose of the check is to avoid spamming the orphanMap with slightly old
txs which we have already seen in a block, but it is already only optimistic
(depending on the outputs not being spent), so make it even more efficient by
only checking the cache and not the entire pcoinsTip.
c074752 [RPC] Add an uptime command that displays the amount of time that bitcoind has been running (Ricardo Velhote)
Tree-SHA512: 8f59d4205042885f23f5b87a0eae0f5d386e9c6134e5324598e7ee304728d4275f383cd154bf1fb25350f5a88cc0ed9f97edb099e9b50c4a0ba72d63ec5ca5b4
This removes the possibility for GetCoin/HaveCoin/HaveCoinInCache to return
true while the respective coin is spent. By doing it across all calls, some
extra checks can be eliminated.
coins_tests is modified to call HaveCoin sometimes before and sometimes
after AccessCoin. A further change is needed because the semantics for
GetCoin slightly changed, causing a pruned entry in the parent cache to not
be pulled into the child in FetchCoin.
Adds new functional test, dbcrash.py, which uses -dbcrashratio to exercise the
logic for recovering from a crash during chainstate flush.
dbcrash.py is added to the extended tests, as it may take ~10 minutes to run
Use _Exit() instead of exit() for crash simulation
This eliminates stderr output such as:
terminate called without an active exception
or
Assertion failed: (!pthread_mutex_destroy(&m)), function ~recursive_mutex, file /usr/local/include/boost/thread/pthread/recursive_mutex.hpp, line 104.
Eliminating the stderr output on crash simulation allows testing with
test_runner.py, which reports a test as failed if stderr is produced.
This requires that we not access pcoinsTip in InitBlockIndex's
FlushStateToDisk (so we just skip it until later in AppInitMain)
and the LoadChainTip in LoadBlockIndex (which there is already one
later in AppinitMain, after ReplayBlocks, so skipping it there is
fine).
Includes some simplifications by Suhas Daftuar and Pieter Wuille.
5257698 Change semantics of HaveCoinInCache to match HaveCoin (Alex Morcos)
Tree-SHA512: 397e9ba28646b81fffa53e55064735d4d242aaffdf8484506825f785b0e414f334e4c5cd1e4e1dd9a4b6d1f6954c7ecad15429934a1c4e8d39f596cbd9f5dd80
5a9b508 [trivial] Add end of namespace comments (practicalswift)
Tree-SHA512: 92b0fcae4d1d3f4da9e97569ae84ef2d6e09625a5815cd0e5f0eb6dd2ecba9852fa85c184c5ae9de5117050330ce995e9867b451fa8cd5512169025990541a2b
deaf48b Handle TIMESTAMP_WINDOW within CWallet::RescanFromTime (Russell Yanofsky)
5b2be2b Make CWallet::RescanFromTime comment less ambiguous (Russell Yanofsky)
9bb66ab Add RescanFromTime method and use from rpcdump (Russell Yanofsky)
ccf84bb Move birthday optimization out of ScanForWalletTransactions (Russell Yanofsky)
Tree-SHA512: cd38433b8f5c5e44ecfba830a6a26bd9a9d0f4a22ae42bce17773d1a6fb25e1ee4289484996dad2d7acfa03059917ff062459f25030a761da7083ba5fbc87bc9
1887337 Add a comment explaining the use of MAX_BLOCK_BASE_SIZE. (Gregory Maxwell)
Tree-SHA512: 4c643a3696241fbf4eac8d58bb26586f319338b28ee86d20394a8ea362911b467853eb40c43487ede753209a3c7bee2e576d2ca80627e9fc924fabefbcaea34b
c1be285 chainparams: make supported service bits option explicit (Cory Fields)
d5c7c1c net: use an internal address for fixed seeds (Cory Fields)
6cdc488 net: switch to dummy internal ip for dns seed source (Cory Fields)
6d0bd5b net: do not allow resolving to an internal address (Cory Fields)
7f31762 net: add an internal subnet for representing unresolved hostnames (Cory Fields)
Tree-SHA512: 9bf1042bef546ac3ef0e0d3a9a5555eb21628ff2674a0cf8c6367194b22bfdab477adf452c0e7c56f44e0fb37debc5e14bdb623452e076fb9c492c7702601d7a
dd869c6 Add an explanation of quickly hashing onto a non-power of two range. (Gregory Maxwell)
Tree-SHA512: 8b362e396206a4ee2e825908dcff6fe4525c12b9c85a6e6ed809d75f03d42edcfba5e460a002e5d17cc70c103792f84d99693563b638057e4e97946dd1d800b2
d5711f4 Filter subtrees and and benchmarks from coverage report (Andrew Chow)
405b86a Replace lcov -r commands with faster way (Andrew Chow)
c8914b9 Have `make cov` optionally include branch coverage statistics (Andrew Chow)
Tree-SHA512: 9c349a7baeb7430ea586617c52f91177df58e3546d6dc573e26815ddb79e30ab1873542d85ac1daca5e1fb2c6d6c8965824b42d027b6b0496a744af57b095852
cf68a48 Deduplicate addrdb.cpp and use CHashWriter/Verifier (Pieter Wuille)
Tree-SHA512: 0301332e797f64da3a1588c9ebaf533af58da41e38f8a64206bff20102c5e82c2a7c630ca3150cf451b2ccf4acb3dd45e44259b6ba15e92786e9e9a2b225bd2f
1ae86ec Changed event RAII helper functions to inline to deal with duplicate symbol linker errors. (Karl-Johan Alm)
fd369d2 Switched httpserver.cpp to use RAII wrapped libevents. (Kalle Alm)
Tree-SHA512: 877e431f211024d42a3b0800e860e02833398611433e8393f8d5d4970f47f4bd670b900443678c067fec110c087aaab7dc1981ccbf17f6057676fdbbda89aed9
6171826 Don't create change at the dust limit, even if it means paying more than expected (Alex Morcos)
Tree-SHA512: d4cf939b97a92d63d4703ad152093c9dc60e74af590697bc21adbcdf17fc9e6ffb37d46d5eefafbd69327d1bcb79911f1b826ce1d960d895d464c4408c4995c3
This wraps CheckInputs in ATMP's cache-inputs call to check that
each scriptPubKey the CCoinsViewCache provides is the one which
was committed to by the input's transaction hash.
A few "a->an" and "an->a".
"Shows, if the supplied default SOCKS5 proxy" -> "Shows if the supplied default SOCKS5 proxy". Change made on 3 occurrences.
"without fully understanding the ramification of a command" -> "without fully understanding the ramifications of a command".
Removed duplicate words such as "the the".
e5c6168 Fix instantiation and array accesses in class base_uint<BITS> (Pavlos Antoniou)
Tree-SHA512: e4d39510d776c5ae8814cd5fb5c5d183cd8da937e339bff95caff68a84492fbec68bf513c5a6267446a564d39093e0c7fc703c645b511caab80f7baf7955b804
9417d7a33 Be much more agressive in AccessCoin docs. (Matt Corallo)
f58349ca8 Restore some assert semantics in sigop cost calculations (Matt Corallo)
3533fb4d3 Return a bool in SpendCoin to restore pre-per-utxo assert semantics (Matt Corallo)
ec1271f2b Remove useless mapNextTx lookup in CTxMemPool::TrimToSize. (Matt Corallo)
Tree-SHA512: 158a4bce063eac93e1d50709500a10a7cb1fb3271f10ed445d701852fce713e2bf0da3456088e530ab005f194ef4a2adf0c7cb23226b160cecb37a79561f29ca
d9bec888f Use REJECT_DUPLICATE for already known and conflicted txn (Pieter Wuille)
Tree-SHA512: adc6dc5caed731c3fd5c8784e8820a074e320360cdb5579c5b9299f9799dd99de60b7382d336ab1909dab8b23e744456d78aa0c3b1c8dd1af3d1b779314cf8fa
131a8ceb7 Make clang-format use C++11 features (e.g. A<A<int>> instead of A<A<int> >) (practicalswift)
Tree-SHA512: e3c0ee683b654eae638deb41c52cf3187fa958dc5fa67778eaf8a83946b63f5b1d24c47bb965eaa910e3fcdcaf9eebf461eb3fc8e3a73ebaf03c7904521fda00
rbx needs to be stashed in a 64bit register on 64bit platforms. With this crash
in particular, it was holding a stack canary which was not properly restored
after the cpuid.
Split out the x86+PIC case so that x86_64 doesn't have to worry about it.
Part of a series of changes to clean up the instantiation of connman
by decoupling the command line arguments.
We also now abort with an error when explicit binds are set with
-listen=0.
e9cd778 Pass in smart fee slider value to coin control dialog (Alex Morcos)
Tree-SHA512: 3899c3eb89b06e9cc842b33fabcce40a84fcc3a88ac2b02861f63419925312ac2a9f632567c02b0a060f5c5cd55f337e35e99b80535d1c1b8fcb7fd0c539f3c0
In order to prevent mixups, our internal range is never allowed as a resolve
result. This means that no user-provided string will ever be confused with an
internal address.
We currently do two resolves for dns seeds: one for the results, and one to
serve in addrman as the source for those addresses.
There's no requirement that the source hostname resolves to the stored
identifier, only that the mapping is unique. So rather than incurring the
second lookup, combine a private subnet with a hash of the hostname.
The resulting v6 ip is guaranteed not to be publicy routable, and has only a
negligible chance of colliding with a user's internal network (which would be
of no consequence anyway).
Since cfe77ef41 the global nTxConfirmTarget wasn't being updated by the smart
fee slider and thus the coin control dialog and labels were not being updated.
6294f32 gettxoutproof() should return consistent result (John Newbery)
Tree-SHA512: 1c36f78ea07a3bdde09e9494207b4372d54bcd94ed2d56e339e78281f6693e26a93e4c3123453d5c0f6e994d0069d5a1c806786c4af71864f87ea4841611c379
cb24c85 Use rdrand as entropy source on supported platforms (Pieter Wuille)
Tree-SHA512: c42eaa01a14e6bc097c70b6bf8540d61854c2f76cb32be69c2a3c411a126f7b4bf4a4486e4493c4cc367cc689319abde0d4adb799d29a54fd3e81767ce0766fc
Use case: TryCreateDirectory(GetDataDir() / "blocks" / "index") would
fail if the blocks directory was not explicitly created before.
The line that did so was in a weird location and could be removed as a
result.
bf376eacc Return early in IsBanned. (Gregory Maxwell)
Tree-SHA512: d8ed4aaf9a7523b00effa4ac17cec3be1ec1f5c5ce64d89833fbc8f3d73d13b022043354fbcf2682b2af05070d115e1fc0cc0b122197e9ddee5959c3fb9dd16d
In Olaoluwa Osuntokun's recent protocol proposal they were using a
mod in an inner loop. I wanted to suggest a normative protocol
change to use the trick we use here, but to find an explanation
of it I had to dig up the PR on github. After I posted about it
several other developers commented that it was very interesting
and they were unaware of it.
I think ideally the code should be self documenting and help
educate other contributors about non-obvious techniques that
we use. So I've written a description of the technique with
citations for future reference.
3ff1fa8 Use override keyword on CCoinsView overrides (Russell Yanofsky)
24e44c3 Don't return stale data from CCoinsViewCache::Cursor() (Russell Yanofsky)
Tree-SHA512: 08699dae0925ffb9c018f02612ac6b7eaf73ec331e2f4f934f1fe25a2ce120735fa38596926e924897c203f7470e99f0a99cf70d2ce31ff428b105e16583a861
c237bd7 wallet: Update formatting (Luke Dashjr)
9cbe8c8 wallet: Forbid -salvagewallet, -zapwallettxes, and -upgradewallet with multiple wallets (Luke Dashjr)
a2a5f3f wallet: Base backup filenames on original wallet filename (Luke Dashjr)
b823a4c wallet: Include actual backup filename in recovery warning message (Luke Dashjr)
84dcb45 Bugfix: wallet: Fix warningStr, errorStr argument order (Luke Dashjr)
008c360 Wallet: Move multiwallet sanity checks to CWallet::Verify, and do other checks on all wallets (Luke Dashjr)
0f08575 Wallet: Support loading multiple wallets if -wallet used more than once (Luke Dashjr)
b124cf0 Wallet: Replace pwalletMain with a vector of wallet pointers (Luke Dashjr)
19b3648 CWalletDB: Store the update counter per wallet (Luke Dashjr)
74e8738 Bugfix: ForceSetArg should replace entr(ies) in mapMultiArgs, not append (Luke Dashjr)
23fb9ad wallet: Move nAccountingEntryNumber from static/global to CWallet (Luke Dashjr)
9d15d55 Bugfix: wallet: Increment "update counter" when modifying account stuff (Luke Dashjr)
f28eb80 Bugfix: wallet: Increment "update counter" only after actually making the applicable db changes to avoid potential races (Luke Dashjr)
Tree-SHA512: 23f5dda58477307bc07997010740f1dc729164cdddefd2f9a2c9c7a877111eb1516d3e2ad4f9b104621f0b7f17369c69fcef13d28b85cb6c01d35f09a8845f23
40796e1 Remove references to priority that snuck back in in 870824e9. (Matt Corallo)
Tree-SHA512: fd6f772a9fdf14b3b125e84a79059d7ab34b3571b35dc48f8d4b9f22ea71c6cdd4ae88c2e135ae317a16744c28dd23cf7f7dd88ea9d8b2d408e57845ef87d03b
While the current implementation is pretty free, there is a lot
of possibility for this to blow up in our face with future changes,
especially as the backing map gets tweaked.
There are some similar asserts which are left removed in policy
and ATMP (policy code being broken isn't a huge deal, but if we
fail to verify some consensus rules, we should most definitely
crash).
Previously it was possible for HaveCoinInCache to return true for a spent
coin. It is more clear to keep the semantics the same. HaveCoinInCache is
used for two reasons:
- tracking coins we may want to uncache, in which case it is unlikely there
would be spent coins we could uncache (not dirty)
- optimistically checking whether we have already included a tx in the
blockchain, in which case a spent coin is not a reliable indicator that we have.
3fb81a8 Use list initialization (C++11) for maps/vectors instead of boost::assign::map_list_of/list_of (practicalswift)
Tree-SHA512: 63a9ac9ec5799472943dce1cd92a4b14e7f1fe12758a5fc4b1efceaf2c85a4ba71dad5ccc50813527f18b192e7714c076e2478ecd6ca0d452b24e88416f872f7
246a02f Use std::unordered_{map,set} (C++11) instead of boost::unordered_{map,set} (practicalswift)
Tree-SHA512: 35cd42012248174751e4b87efbc78689957f731d7710dea7e369974c6ec31b15b32d1537fb0d875c94c7ffb5046d9784735e218e5baeed96d525861dab6d4252
227ae9b [tests] Use FastRandomContext instead of boost::random::{mt19937,uniform_int_distribution} (practicalswift)
Tree-SHA512: 1bde6c8b9498051fa2eae4913eb1f5411adea8dea1511c0df859aea57a2a7db6f5839945ddf2eccdddfa322bceacad35a5d875742db7d15e40dbea83185307bb
e94584858 scripted-diff: Use new naming style for insecure_rand* functions (Pieter Wuille)
2fcd9cc86 scripted-diff: Use randbits/bool instead of randrange where possible (Pieter Wuille)
2ada67852 Use randbits instead of ad-hoc emulation in prevector tests (Pieter Wuille)
5f0b04eed Replace rand() & ((1 << N) - 1) with randbits(N) (Pieter Wuille)
3ecabae36 Replace more rand() % NUM by randranges (Pieter Wuille)
efee1db21 scripted-diff: use insecure_rand256/randrange more (Pieter Wuille)
1119927df Add various insecure_rand wrappers for tests (Pieter Wuille)
124d13a58 Merge test_random.h into test_bitcoin.h (Pieter Wuille)
90620d66c scripted-diff: Rename cuckoo tests' local rand context (Pieter Wuille)
37e864eb9 Add FastRandomContext::rand256() and ::randbytes() (Pieter Wuille)
Tree-SHA512: d09705a3ec718ae792f7d66a75401903ba7b9c9d3fc36669d6e3b9242f0194738106be26baefc8a8e3fa6df7c9a35978c71c0c430278a028b331df23a3ea3070
We can call gettxoutproof() with a list of transactions. Currently, if
the first transaction is unspent (and all other transactions are in the
same block), then the call will succeed. If the first transaction has
been spent, then the call will fail. The means that the following two
calls will return different results:
gettxoutproof(unspent_tx1, spent_tx1)
gettxoutproof(spent_tx1, unspent_tx1)
This commit makes behaviour independent of transaction ordering by looping
through all transactions provided and trying to find which block they're in.
This commit also increases the test coverage and tests more failure
cases for gettxoutproof()
Added an option to configure to allow for branch coverage statistics gathering.
Disabled logprint macro when coverage testing is on so that unnecessary branches are not analyzed.
The implementation of base_uint::operator++(int) and base_uint::operator--(int) is now safer.
Array pn is accessed via index i after bounds checking has been performed on the index, rather than before.
The logic of the while loops has also been made more clear.
A compile time assertion has been added in the class constructors to ensure that BITS is a positive multiple of 32.
CCoinsViewCache doesn't actually support cursor iteration returning the
current contents of the cache, so raise an error when the cursor method is
called instead of returning a cursor that iterates over stale data.
Also update the gettxoutsetinfo RPC which was relying on the old behavior to be
explicit about which view it is returning data about.
This adds a new CuckooCache in validation, caching whether all of a
transaction's scripts were valid with a given set of script flags.
Unlike previous attempts at caching an entire transaction's
validity, which have nearly universally introduced consensus
failures, this only caches the validity of a transaction's
scriptSigs. As these are pure functions of the transaction and
data it commits to, this should be much safer.
This is somewhat duplicative with the sigcache, as entries in the
new cache will also have several entries in the sigcache. However,
the sigcache is kept both as ATMP relies on it and because it
prevents malleability-based DoS attacks on the new higher-level
cache. Instead, the -sigcachesize option is re-used - cutting the
sigcache size in half and using the newly freed memory for the
script execution cache.
Transactions which match the script execution cache never even have
entries in the script check thread's workqueue created.
Note that the cache is indexed only on the script execution flags
and the transaction's witness hash. While this is sufficient to
make the CScriptCheck() calls pure functions, this introduces
dependancies on the mempool calculating things such as the
PrecomputedTransactionData object, filling the CCoinsViewCache, etc
in the exact same way as ConnectBlock. I belive this is a reasonable
assumption, but should be noted carefully.
In a rather naive benchmark (reindex-chainstate up to block 284k
with cuckoocache always returning true for contains(),
-assumevalid=0 and a very large dbcache), this connected blocks
~1.7x faster.
9a5a1d7 RPC/rawtransaction: createrawtransaction: Check opt_into_rbf when provided with either value (Luke Dashjr)
23b0fe3 bitcoin-tx: rbfoptin: Avoid touching nSequence if the value is already opting in (Luke Dashjr)
b005bf2 Introduce MAX_BIP125_RBF_SEQUENCE constant (Luke Dashjr)
575cde4 [bitcoin-tx] add rbfoptin command (Jonas Schnelli)
5d26244 [Tests] extend the replace-by-fee test to cover RPC rawtx features (Jonas Schnelli)
36bcab2 RPC/Wallet: Add RBF support for fundrawtransaction (Luke Dashjr)
891c5ee Wallet: Refactor FundTransaction to accept parameters via CCoinControl (Luke Dashjr)
578ec80 RPC: rawtransaction: Add RBF support for createrawtransaction (Luke Dashjr)
Tree-SHA512: 446e37c617c188cc3b3fd1e2841c98eda6f4869e71cb3249c4a9e54002607d0f1e6bef92187f7894d4e0746ab449cfee89be9f6a1a8831e25c70cf912eac1570
656dbd871 Perform member initialization in initialization lists where possible (practicalswift)
Tree-SHA512: 048380f4da23ab1eaaf471801a01dbd76f2235afb686c1489b30a6bac109195134afc83414b8378d3482a9042d537ec62d30136dadb9347cf06b07fb5c693208
8ad5bde Merge bctest.py into bitcoin-util-test.py (John Newbery)
95836c5 Use shared config file for functional and util tests (John Newbery)
89fcd35 Use an .ini config file for environment vars in bitcoin-util-test.py (John Newbery)
e9265df Change help_text in bitcoin-util-test.py to a docstring. (John Newbery)
ce58e93 Change bitcoin-util-test.py to use Python3 (John Newbery)
Tree-SHA512: 66dab0b4a8546aee0dfaef134a165f1447aff4c0ec335754bbc7d9e55909721c62f09cdbf4b22d02ac1fcd5a9b66780f91e1cc4d8687fae7288cc9072a23a78f
Prior to per-utxo CCoins, we checked that no other in-mempool tx
spent any of the given transaction's outputs, as we don't want to
uncache that entire tx in such a case. However, we now are checking
only that there exists no other mempool spends of the same output,
which should clearly be impossible after we removed the transaction
which was spending said output (barring massive mempool
inconsistency).
Thanks to @sdaftuar for the suggestion.
At startup, we choose one peer to serve us the headers chain, until
our best header is close to caught up. Disconnect this peer if more
than 15 minutes + 1ms/expected_header passes and our best header
is still more than 1 day away from current time.
This change has no effect on wallet behavior.
On wallet startup, the transaction scan avoids reading any blocks with
timestamps older than the wallet birthday (less than nTimeFirstKey -
TIMESTAMP_WINDOW). This block skipping code currently resides in
CWallet::ScanForWalletTransactions but it doesn't really belong there because
it makes the implementation unnecessarily fragile and hard to understand, and
it never has any effect except at startup (because all other callers do their
rescans based on timestamps other than, but always greater or equal to,
nTimeFirstKey).
This adds the listening address on which incoming connections were received to the
CNode and CNodeStats structures.
The address is reported in `getpeerinfo`.
This can be useful for distinguishing connections received on different listening ports
(e.g. when using a different listening port for Tor hidden service connections)
or different networks.
8906a9a0d Fix bumpfee test after #10449 (Russell Yanofsky)
Tree-SHA512: 0838c7696499baf0fb5ee6edf0b081752d6c37578360a7f24a7e9c700598cbc14ff95826f2f5124cca805d2609470a052bc7309211874b13be7ac1ff9e911a34
589827975 scripted-diff: various renames for per-utxo consistency (Pieter Wuille)
a5e02bc7f Increase travis unit test timeout (Pieter Wuille)
73de2c1ff Rename CCoinsCacheEntry::coins to coin (Pieter Wuille)
119e552f7 Merge CCoinsViewCache's GetOutputFor and AccessCoin (Pieter Wuille)
580b02309 [MOVEONLY] Move old CCoins class to txdb.cpp (Pieter Wuille)
8b25d2c0c Upgrade from per-tx database to per-txout (Pieter Wuille)
b2af357f3 Reduce reserved memory space for flushing (Pieter Wuille)
41aa5b79a Pack Coin more tightly (Pieter Wuille)
97072d668 Remove unused CCoins methods (Pieter Wuille)
ce23efaa5 Extend coins_tests (Pieter Wuille)
508307968 Switch CCoinsView and chainstate db from per-txid to per-txout (Pieter Wuille)
4ec0d9e79 Refactor GetUTXOStats in preparation for per-COutPoint iteration (Pieter Wuille)
13870b56f Replace CCoins-based CTxMemPool::pruneSpent with isSpent (Pieter Wuille)
05293f3cb Remove ModifyCoins/ModifyNewCoins (Pieter Wuille)
961e48397 Switch tests from ModifyCoins to AddCoin/SpendCoin (Pieter Wuille)
8b3868c1b Switch CScriptCheck to use Coin instead of CCoins (Pieter Wuille)
c87b957a3 Only pass things committed to by tx's witness hash to CScriptCheck (Matt Corallo)
f68cdfe92 Switch from per-tx to per-txout CCoinsViewCache methods in some places (Pieter Wuille)
000391132 Introduce new per-txout CCoinsViewCache functions (Pieter Wuille)
bd83111a0 Optimization: Coin&& to ApplyTxInUndo (Pieter Wuille)
cb2c7fdac Replace CTxInUndo with Coin (Pieter Wuille)
422634e2f Introduce Coin, a single unspent output (Pieter Wuille)
7d991b55d Store/allow tx metadata in all undo records (Pieter Wuille)
c3aa0c119 Report on-disk size in gettxoutsetinfo (Pieter Wuille)
d34242430 Remove/ignore tx version in utxo and undo (Pieter Wuille)
7e0032290 Add specialization of SipHash for 256 + 32 bit data (Pieter Wuille)
e484652fc Introduce CHashVerifier to hash read data (Pieter Wuille)
f54580e7e error() in disconnect for disk corruption, not inconsistency (Pieter Wuille)
e66dbde6d Add SizeEstimate to CDBBatch (Pieter Wuille)
Tree-SHA512: ce1fb1e40c77d38915cd02189fab7a8b125c7f44d425c85579d872c3bede3a437760997907c99d7b3017ced1c2de54b2ac7223d99d83a6658fe5ef61edef1de3
As the maximum amount of data that can be pulled into the cache due to
a block validation is much lower now (at most one CCoin entry per input
and per output), reduce the conservative estimate used to determine
flushing time.
This patch makes several related changes:
* Changes the CCoinsView virtual methods (GetCoins, HaveCoins, ...)
to be COutPoint/Coin-based rather than txid/CCoins-based.
* Changes the chainstate db to a new incompatible format that is also
COutPoint/Coin based.
* Implements reconstruction code for hash_serialized_2.
* Adapts the coins_tests unit tests (thanks to Russell Yanofsky).
A side effect of the new CCoinsView model is that we can no longer
use the (unreliable) test for transaction outputs in the UTXO set
to determine whether we already have a particular transaction.
This clarifies a bit more the ways in which the new script execution
cache could break consensus in the future if additional data from
the CCoins object were to be used as a part of script execution.
After this change, any such consensus breaks should be very visible
to reviewers, hopefully ensuring no such changes can be made.
The new functions are:
* CCoinsViewCache::AddCoin: Add a single COutPoint/Coin pair.
* CCoinsViewCache::SpendCoin: Remove a single COutPoint.
* AddCoins: utility function that invokes CCoinsViewCache::AddCoin for
each output in a CTransaction.
* AccessByTxid: utility function that searches for any output with
a given txid.
* CCoinsViewCache::AccessCoin: retrieve the Coin for a COutPoint.
* CCoinsViewCache::HaveCoins: check whether a non-empty Coin exists
for a given COutPoint.
The AddCoin and SpendCoin methods will eventually replace ModifyCoins
and ModifyNewCoins, AddCoins will replace CCoins::FromTx, and the new
AccessCoins and HaveCoins functions will replace their per-txid
counterparts.
Note that AccessCoin for now returns a copy of the Coin object. In a
later commit it will be change to returning a const reference (which
keeps working in all call sites).
The earlier CTxInUndo class now holds the same information as the Coin
class. Instead of duplicating functionality, replace CTxInUndo with a
serialization adapter for Coin.
6d7104c99 [Qt] make sure transaction table entry gets updated after bump (Jonas Schnelli)
32325a3f5 [Qt] hide bump context menu action if tx already has been bumped (Jonas Schnelli)
Tree-SHA512: d3e5991145879b7f6b212d9d9c6f423609dc8e6fa7f6feb7df931691f1dec2acb6ab162c2fb7e758d3ca3f3fb14363df2f50f0e83e83068da5cc7e6de35e69d2
b6fbfc2 net: only enforce the services required to connect (Cory Fields)
Tree-SHA512: 88943bff63213a734f3c96c45760cadaeb9ba18287c8a20c279851ebaf058a334c969028fb2180f155508e3eea4b838147382e4f2b655e7a9aa098eadc81d53e
cd5622d Make bitcoind invalid argument error message specific (Wladimir J. van der Laan)
Tree-SHA512: 78999b9359685c4090f9a112e1d02bdddac22173f5f04600773b042acb9481ebb54d0f73d9d6d74249f845f497927a58d59de69bf33e3dccf096c3c80c7ebf6b
Previously, transaction metadata (height, coinbase or not, and before
the previous commit also nVersion) was only stored for undo records
that correspond to the last output of a transaction being spent.
This only saves 2 bytes per undo record. Change this to storing this
information for every undo record, and stop complaining for having it
in non-last output spends. This means that undo dat written with
this patch won't be readable by older versions anymore.
This makes the following changes:
* In undo data and the chainstate database, the transaction nVersion
field is removed from the data structures, always written as 0, and
ignored when reading.
* The definition of hash_serialized in gettxoutsetinfo is changed to no
longer incude the nVersion field. It is renamed to hash_serialized_2
to avoid confusion. The new definition also includes transaction
height and coinbase information, as this information was missing
before.
This depends on having a CHashVerifier-based undo data checksum
verifier.
Apart from changing the definition of serialized_hash, downgrading
after using this patch is supported, as no release ever used the value
of nVersion field in UTXO entries.
This is necessary later, when we drop the nVersion field from the undo
data. At that point deserializing and reserializing the data won't
roundtrip anymore, and thus that approach can't be used to verify
checksums anymore.
With this CHashVerifier approach, we can deserialize while hashing the
exact serialized form that was used. This is both more efficient and
more correct in that case.
The error() function unconditionally reports an error. It should only
be used for actually exception situations, and not for the type of
inconsistencies that ApplyTxInUndo/DisconnectBlock can graciously deal
with.
This also makes a subtle semantics change: in ApplyTxInUndo, when a
record with metadata is encountered (indicating it is the last spend
from a tx), don't wipe the CCoins record if it wasn't empty at that
point. This makes sure that UTXO operations never affect any other
UTXOs (including those from the same tx).
513da90cd Add test for empty chain and reorg consistency for gettxoutsetinfo. (Gregory Maxwell)
822755a42 Fix: make CCoinsViewDbCursor::Seek work for missing keys (Pieter Wuille)
Tree-SHA512: e549921e8b8f599bf61ebe0ee7ef1d2f474043723d633e24665fe434b996a98e039612de8a1c2cd16b63f154943ff5ea1c1935e9561cfb813a00d47d926d0b22
No change in behavior. Get rid of specifiedConfirmTarget if/else block and
rename specifiedConfirmTarget and ignoreUserSetFee variables to
ignoreGlobalPayTxFee.
The current message is not helpful. Hardly anyone even remembers that
bitcoind used to be a cli utility, let alone new users. Print what the
actual problem is.
211adc0 Use range-based for loops (C++11) when looping over vector elements (practicalswift)
Tree-SHA512: 0e007f20dcef99d3c7a1036265e00f689d69f42e02fd82dd8389f45b52d31947e5f9388de2610d3d9bd9f554915ce0d35ebce561e5ae3a9013956d0ee4937145
5844609 [net] Avoid initialization to a value that is never read (practicalswift)
Tree-SHA512: 068c3fba58034187f546688bc9b8b7317e0657e797850613fb6289a4efc28637e4d06a0fa5e57480538c6b8340ed6d6a6c6f9a96f130b698d5d60975490a03d8
A few code changes were needed to accompany the test:
* Adding setObjectName() calls for a few Qt controls to make them easily
accessible from the test.
* Calling contextMenu->popup() instead of contextMenu->exec() to open
the transaction list context menu without blocking the test thread.
* Opening the context menu at the contextualMenu event point rather than
the cursor position (this change was not strictly needed to make the test
work, but is more correct).
* Updating the bumped transaction row with showTransaction=true instead of
false. This is needed to prevent the bumped tx from being hidden, so the last
part of the test which attempts to bump the bumped tx can work. (Technically
this change is a more general bugfix not limited to the testing environment,
but the bug doesn't happen outside of the testing environment because in the
full Qt client, a queued NotifyTransactionChanged notification causes the row
to be updated twice, first with showTransaction=false, then immediately after
with showTransaction=true.)
888cce5 Add perf counter data to GetStrongRandBytes state in scheduler (Matt Corallo)
399fb8f Add internal method to add new random data to our internal RNG state (Matt Corallo)
Tree-SHA512: 9732a3804d015eaf48d56b60c73880014845fd17a098f1ac2eff6bd50a4beb8b8be65956ac1f0d641e96e3a53c17daddd919401edbf2e3797c3fb687730fb913
```
$ git blame src/policy/fees.cpp | grep becuase
3810e976 (2017-03-07 11:33:44 -0500 789) * checks for 2*target becuase we are taking the max over all time
$ git blame src/policy/fees.h | grep successfullly
2d2e1705 (2017-04-12 12:29:03 -0400 54) * representing that a tx was successfullly confirmed in less than or equal to
$ git blame src/wallet/feebumper.cpp | grep "hasen't"
a3878374 (2017-05-11 09:34:39 +0200 258) // make sure the transaction still has no descendants and hasen't been mined in the meantime
```
693247b [test] Speed up fuzzing by ~200x when using afl-fuzz (practicalswift)
Tree-SHA512: 95922fc2616b8cb00dd531ed1140a52bbda4e04292dd8c1c60a8f49dbf6ccb797a18b61180b3fb68d695456b478a1f5ae7fda47e8ecee41dd65555487aef40a3
43c5877 Prevent shadowing the global dustRelayFee. (Pavel Janík)
Tree-SHA512: 9765931a7753c484990003396afd0bb65a53f42d1cad9502017720618ce90b3c5ae68591db01e3524adecdbe6925a5eeeebf04012ba644ef3b65073af207ae5d
Previously if we didn't have any local addresses, GetLocalAddress would return
0.0.0.0 and then we'd swap in a peer's notion of our address in AdvertiseLocal,
but then nServices would never get set.
a38783747 Make sure we re-check the conditions of a feebump during commit (Jonas Schnelli)
9b9ca538c Only update the transactionrecord if the fee bump has been commited (Jonas Schnelli)
6ed4368f1 Make sure we use nTxConfirmTarget during Qt fee bumps (Jonas Schnelli)
be08fc39d Make sure we always update the table row after a bumpfee call (Jonas Schnelli)
2678d3dc6 Show old-fee, increase a new-fee in Qt fee bumper confirmation dialog (Jonas Schnelli)
2ec911f60 Add cs_wallet lock assertion to SignTransaction() (Jonas Schnelli)
fbf385cc8 [Qt] simple fee bumper with user verification (Jonas Schnelli)
Tree-SHA512: a3ce626201abf64cee496dd1d83870de51ba633de40c48eb0219c3eba5085c038af34c284512130d2544de20c1bff9fea1b78f92e3574c21dd4e96c11b8e7d76
38bc1ec Make more json-like output from estimaterawfee (Alex Morcos)
2d2e170 Comments and improved documentation (Alex Morcos)
ef589f8 minor cleanup: remove unnecessary variable (Alex Morcos)
3ee76d6 Introduce a scale factor (Alex Morcos)
5f1f0c6 Historical block span (Alex Morcos)
aa19b8e Clean up fee estimate debug printing (Alex Morcos)
10f7cbd Track first recorded height (Alex Morcos)
3810e97 Rewrite estimateSmartFee (Alex Morcos)
c7447ec Track failures in fee estimation. (Alex Morcos)
4186d3f Expose estimaterawfee (Alex Morcos)
2681153 minor refactor: explicitly track start of new bucket range and don't update curNearBucket on final loop. (Alex Morcos)
1ba43cc Make EstimateMedianVal smarter about small failures. (Alex Morcos)
d3e30bc Refactor to update moving average on fly (Alex Morcos)
e5007ba Change parameters for fee estimation and estimates on all 3 time horizons. (Alex Morcos)
c0a273f Change file format for fee estimates. (Alex Morcos)
Tree-SHA512: 186e7508d86a1f351bb656edcd84ee9091f5f2706331eda9ee29da9c8eb5bf67b8c1f2abf6662835560e7f613b1377099054f20767f41ddcdbc89c4f9e78946d
65d484a Output line to debug.log when IsInitialBlockDownload latches to false (Alex Morcos)
Tree-SHA512: 8b9d1377167a78ea55afc4582c8b9305c8b0fe56063a25920e9d45ea9335470314e3cfdc92e78b803d304476fa4c19b228fea1758bbeadd20c719006d814b5f2
Motivation for moving these is to make supporting IPC simpler (#10102), so
these lookups can be one-shot IPC requests, instead of back-and-forth
interactions over the IPC channel.
Also these functions are potentially useful outside of the bitcoin GUI (e.g.
for RPCs).
2f84cf6 tests: Correct testcase in script_tests.json for large number OP_EQUAL (Wladimir J. van der Laan)
Tree-SHA512: 3a4d33c7d65ea40f25e2f5f2dfab8b0262cac8a7c33698eef8332ca5ec4a6f88f73fc51441892b49ffa85660be5037644430585f2eab76e257d544f9c2271ab7
Start importwallet rescans at the first block with timestamp greater or equal
to the wallet birthday instead of the last block with timestamp less or equal.
This fixes an edge case bug where importwallet could fail to start the rescan
early enough if there are blocks with decreasing timestamps or multiple blocks
with the same timestamp.
761392d [logging] log system time and mock time (John Newbery)
Tree-SHA512: 0a4b3ad74bcac201be490fe12e4b45adeabc39030ac46f40e1aeb2a20b2f3963e4468e65798d8aaeca1818759cab55ff2b2aa214500aa11571492c3301dd31c1
e3c9f2d Use a verbosity instead of two verbose parameters (Andrew Chow)
c99ab3c RPC: Allow multiple names for parameters (Luke Dashjr)
Tree-SHA512: 686b38f6b0106563738d51f55666fe6d49a5b121b30d4480c2bfb640a59ede8e6f7f3c05c3c5d80a5288e127991e191d19d1d4f9ace566fd39edeb27b31857ff
An off-by-one-block bug in importmulti rescan logic could cause it to return
success in an edge case even when a rescan was not successful. The case where
this would happen is if there were multiple blocks in a row with the same
GetBlockTimeMax() value, and the last block was scanned successfully, but one
or more of the earlier blocks was not readable.
Verbose is changed to an int. This can have values from 0-2 for each level of verbosity.
Verbosity level 2 has transaction details displayed in the results.
For the per confirmation number tracking of data, introduce a scale factor so that in the longer horizones confirmations are bucketed together at a resolution of the scale. (instead of 1008 individual data points for each fee bucket, have 42 data points each covering 24 different confirmation values.. (1-24), (25-48), etc.. )
Store in fee estimate file the block span for which we were tracking estimates, so we know what targets we can successfully evaluate with the data in the file. When restarting use either this historical block span to set valid range of targets until our current span of tracking estimates is just as long.
Track the first time we seen txs in a block that we have been tracking in our mempool. Used to evaluate validity of fee estimates for different targets.
Change the logic of estimateSmartFee to check a 60% threshold at half the target, a 85% threshold at the target and a 95% threshold at double the target. Always check the shortest time horizon possible and ensure that estimates are monotonically decreasing. Add a conservative mode, which makes sure that the 95% threshold is also met at longer time horizons as well.
Track information the ranges of fee rates that were used to calculate the fee estimates (the last range of fee rates in which the data points met the threshold and the first to fail) and provide an RPC call to return this information.
Instead of stopping if it encounters a "sufficient" number of transactions which don't meet the threshold for being confirmed within the target, it keeps looking to add more transactions to see if there is a temporary blip in the data. This allows a smaller number of required data points.
Cleanup request from #10287.
Change "Test #:" comments to "Test:"
Change BOOST_CHECK(... = ...) to BOOST_CHECK_EQUAL(..., ...)
Remove three unnecessary if statements
97477c5 Maintain state across GetStrongRandBytes calls (Pieter Wuille)
Tree-SHA512: 77e9b1f3c6eeb0c2a3e0c64358150767222ff0b7120ccd5f4ae0276cea0e4fa275c1b757e3f20be07dc0b4ef07f70ab0b70112080c8d3d0cb6ed703db8a59168
2c0a6f1 Use sanity check timestamps as entropy (Pieter Wuille)
33f853d Test that GetPerformanceCounter() increments (Pieter Wuille)
f544094 Use hardware timestamps in RNG seeding (Pieter Wuille)
Tree-SHA512: ea96ff56d425b5dc693b4dd35c8aa64ba20a01b9bd7d2d65298ece623f434e8cfa190f9c0f9b76df8aa496547bfa64533eb751edec8401d09bd5ee3478928a59
ed36de5 [tests] Update Unit Test for addrman.h/addrman.cpp (Jimmy Song)
Tree-SHA512: e7c08c19e227c34c230900e14a176b2290022b78b0ece387452e673662491c11f26249cbf1711235276c07a964c339e27b4cda9a2730ded5c0e23a650e0d72db
c1082a7 Chainparams: Use the factory for pow tests (Jorge Timón)
2351a06 Chainparams: Get rid of CChainParams& Params(std::string) (Jorge Timón)
f87f362 Chainparams: Use a regular factory for creating chainparams (Jorge Timón)
Tree-SHA512: 359c8a2a1bc9d02db7856d02810240ada28048ac088f878b575597a7255cdb0ffdd1a647085ee67a34c6a7e7ed9e6cfdb61240cf6e75139619b640dbb096072c
381a46e Consensus: Policy: MOVEONLY: Move CFeeRate out of the consensus module (Jorge Timón)
330bb5a Consensus: Minimal way to move dust out of consensus (Jorge Timón)
Tree-SHA512: 19a2ea8169afd5a9d3f940d8974e34cfaead153e3ff3068ac82fccdb8694d19d9b45938904ec9e8cd095bd5ca3a0080364da29372f6aaf56b11a6c2ccd6c7a4d
3a0a5bc [doc] Add hint about getmempoolentry to getrawmempool help. (Karl-Johan Alm)
Tree-SHA512: 8327d7d7ad93296525fbf95b7a824e3525bde84653999f125afd845823eb39e3a03cd39725962ed949aa2b9ad207ecad6d287294fa321ff1a4d7fbd5a4b8560b
0f3471f net: make CNode's id private (Cory Fields)
9ff0a51 scripted-diff: net: Use accessor rather than node's id directly (Cory Fields)
e50c33e devtools: add script to verify scriptable changes (Cory Fields)
Tree-SHA512: a0ff50f4e1d38a2b63109b4996546c91b3e02e00d92c0bf04f48792948f78b1f6d9227a15d25c823fd4723a0277fc6a32c2c1287c7abbb7e50fd82ffb0f8d994
vToFetch is never used after declaration. When checked if not empty,
evaluation is always false. Best case scenario this is optimized by the
compiler, worst case it wastes cpu cycles. It should be removed either
way.
84973d3 Merge #454: Remove residual parts from the schnorr expirement.
5e95bf2 Remove residual parts from the schnorr expirement.
cbc20b8 Merge #452: Minor optimizations to _scalar_inverse to save 4M
4cc8f52 Merge #437: Unroll secp256k1_fe_(get|set)_b32 to make them much faster.
465159c Further shorten the addition chain for scalar inversion.
a2b6b19 Fix benchmark print_number infinite loop.
8b7680a Unroll secp256k1_fe_(get|set)_b32 for 10x26.
aa84990 Unroll secp256k1_fe_(get|set)_b32 for 5x52.
cf12fa1 Minor optimizations to _scalar_inverse to save 4M
1199492 Merge #408: Add `secp256k1_ec_pubkey_negate` and `secp256k1_ec_privkey_negate`
6af0871 Merge #441: secp256k1_context_randomize: document.
ab31a52 Merge #444: test: Use checked_alloc
eda5c1a Merge #449: Remove executable bit from secp256k1.c
51b77ae Remove executable bit from secp256k1.c
5eb030c test: Use checked_alloc
72d952c FIXUP: Missing "is"
70ff29b secp256k1_context_randomize: document.
9d560f9 Merge #428: Exhaustive recovery
8e48aa6 Add `secp256k1_ec_pubkey_negate` and `secp256k1_ec_privkey_negate`
2cee5fd exhaustive tests: add recovery module
678b0e5 exhaustive tests: remove erroneous comment from ecdsa_sig_sign
03ff8c2 group_impl.h: remove unused `secp256k1_ge_set_infinity` function
a724d72 configure: add --enable-coverage to set options for coverage analysis
b595163 recovery: add tests to cover API misusage
6f8ae2f ecdh: test NULL-checking of arguments
25e3cfb ecdsa_impl: replace scalar if-checks with VERIFY_CHECKs in ecdsa_sig_sign
git-subtree-dir: src/secp256k1
git-subtree-split: 84973d393ac240a90b2e1a6538c5368202bc2224
Rather than re-add disconnected block transactions back to the mempool
immediately, store them in a separate disconnectpool for later processing,
because we expect most such transactions to reappear in the chain that is
still to be connected (and thus we can avoid the work of reprocessing those
transactions through the mempool altogether).
a750d77 Add tests for mempool persistence (John Newbery)
91c91e1 Control mempool persistence using a command line parameter. (John Newbery)
Tree-SHA512: 157d01cefd1903b8bfc5cbab42a3cc5e9c1094179bf4b64b3d34c0d4d9b976d593755bfea5c41c631cb758e1de17c6c2058c130d487d20560b7c0bafcddfa520
185c7f0 Avoid reading the old hd master key during wallet encryption (Matt Corallo)
Tree-SHA512: b744e8490c0e948355bb77b2695902bb99f89a68af46aa2be9120bd2ccf3c340eb8a56340fec117f9a935192298028945c9b18120ee6b8b23e7da8ffdb635745
Add test for adding multiple addresses to address manager
Clean up unnecessary modulo operations
Add test for GetNewBucket's alternate method signature
d6732d8 [tests] update disconnect_ban.py test case to work with listbanned (John Newbery)
77c54b2 [net] listbanned RPC and QT should show correct banned subnets (John Newbery)
Tree-SHA512: edd0e43377d456260d2697213c2829f8483630f3a668b6707d52605faefa610d951d10e6f22a95eff483cbd14faa8ac9b69fa7d3c0b5735c5f3df23fd71282e0
7c58863 [Wallet] unset change position when there is no change on exact match (Gregory Sanders)
Tree-SHA512: ce8b9337e4132e32d80f954258d50938052c833a48e39431649d6adb16e3d18626a0ae5d300827e7fa397927fba72a1f066cb31af9b0a3ef7f1feb6024461626
DisconnectBlock currently has a complicated interface:
Situation Return value
pfClean != nullptr pfClean == nullptr
All good: true true
Failure: false false
Unclean rewind: true false
with *pfClean=false
Change this to return a tristate enum instead. As an added bonus,
remove the ValidationState& argument which was unused.
b51aaf1 Remove unused C++ code not covered by unit tests (practicalswift)
Tree-SHA512: 267bbd87df01a296bf23e82a8b6ee968e13e23a6aaecc535d803890a3e3e9f6208c7fc4c1f97afd98ed3e498b12fe1ada7e3cb2977ad12359a813f57336c74e5
dcb69fd [test] Unit test amount.h/amount.cpp (Jimmy Song)
Tree-SHA512: dc50e6158322a282a8b8b60c8eab7ce327a33c48113a1455b8a1784f07e6277ad499e85ec978199468a2dc34e9e288287c8803c215f810fa2d841cdda9a414f5
This adds a simpler new implementation of getbalance logic along with asserts
to confirm it behaves identically to the old logic. The old logic is removed in
the next commit.
1b14449 [test] Add Unit Test for GetListenPort (Jimmy Song)
Tree-SHA512: aea5f60fb3699680cc5acac9d9c8d8712634db9d629bbfa1815a29e5cf46c22f783886c608664baaa91b3282c52ce8069c358850cf4f90acf731a9e6c1701caa
c36ea69 [wallet] Make sure pindex is non-null before possibly referencing in LogPrintf call. (Karl-Johan Alm)
Tree-SHA512: a14c9f3e1228bca91977bea821c56a377d80889b41d250050c9be67aa93e460319a7cf1d4b63ee40f23b5a34159590f0e3fe15dc88698dc694c0c8098bd2db4d
e6756ad Switch CCoinsMap from boost to std unordered_map (Pieter Wuille)
344a2c4 Add support for std::unordered_{map,set} to memusage.h (Pieter Wuille)
Tree-SHA512: 51288301e7c0f29ffac8c59f4cc73ddc36b7abeb764009da6543f2eaeeb9f89bd47dde48131a7e0aefad8f7cb0b74b2f33b8be052c8e8a718339c3e6bb963447
911a480 wallet: Add comment describing the various classes in walletdb.h (Wladimir J. van der Laan)
69d2e9b wallet: Make IsDummy private in CWalletDBWrapper (Wladimir J. van der Laan)
3323281 wallet: CWalletDB CDB composition not inheritance (Wladimir J. van der Laan)
be9e1a9 wallet: Reduce references to global bitdb environment (Wladimir J. van der Laan)
071c955 wallet: Get rid of fFileBacked (Wladimir J. van der Laan)
71afe3c wallet: Introduce database handle wrapper (Wladimir J. van der Laan)
Tree-SHA512: e4e72953c61a2f6995d609a32f8ed8e18cab9a92bc9e193d46a1d1f06d9daa5c6da6fce2867d4e3ba4fc0439141901a3d35f246486f0fa8f59587786379dfcbd
dd07068 Fixed typo in documentation for merkleblock.h (Mikerah)
Tree-SHA512: 92655c8022eb33852c116da517b12bd17b3b668713cd85fe185a15245ea9810605626b1d0955fa117f7b56863e0a52b3a86dab42409332452b5eb72a7d34f30d
Move buckets and bucketMap to be stored as part of overall serialization of estimator.
Add some placeholder data so file format is only changed once.
Maintain 3 different TxConfirmStats with potential for different decays and scales.
68af651 MOVEONLY: move TxConfirmStats to cpp (Alex Morcos)
2332f19 Initialize TxConfirmStats in constructor (Alex Morcos)
5ba81e5 Read and Write fee estimate file directly from CBlockPolicyEstimator (Alex Morcos)
14e10aa Call estimate(Smart)Fee directly from CBlockPolicyEstimator (Alex Morcos)
dbb9e36 Give CBlockPolicyEstimator it's own lock (Alex Morcos)
f6187d6 Make processBlockTx private. (Alex Morcos)
ae7327b Make feeEstimator its own global instance of CBlockPolicyEstimator (Alex Morcos)
Tree-SHA512: dbf3bd2b30822e609a35f3da519b62d23f8a50e564750695ddebd08553b4c01874ae3e07d792c6cc78cc377d2db33b951ffedc46ac7edaf5793f9ebb931713af
CWalletDB now contains a CDB instead of inheriting from it.
This makes it easier to replace the internal transaction with a different
database, without leaking through internals.
Instead, CWalletDB() with a dummy handle will just give you a no-op
database in which writes always succeeds and reads always fail. CDB
already had functionality for this, so just use that.
Abstract database handle from explicit strFilename into
CWalletDBWrapper.
Also move CWallet::Backup to db.cpp - as it deals with representation
details this is a database specific operation.
4082fb0 Add missing <atomic> header in clientmodel.h (Jonas Schnelli)
928d4a9 Set both time/height header caches at the same time (Jonas Schnelli)
610a917 Declare headers height/time cache mutable, re-set the methods const (Jonas Schnelli)
cf92bce Update the remaining blocks left in modaloverlay at init. (Jonas Schnelli)
7148f5e Reduce cs_main locks during modal overlay by adding an atomic cache (Jonas Schnelli)
Tree-SHA512: a92ca22f90b8b2a5e8eb94fdce531ef44542e21a8dbbb0693f7723d7018592cb68de687a2a0aac91d31cbf019793f8e922550656d2b130ed3d854d60630341db
disconnectnode() can currently only be called with the IP address/port
of the node the user wishes to connect. This commit allows the node to
be disconnected using the nodeid returned by getpeerinfo().
608bbcc [qt] Stop treating coinbase outputs differently: show them at 1conf (Matt Corallo)
Tree-SHA512: 62ba10520da8b83cf8e97c86dec3ccdcca8b7bfae0174d1a4099d33aa5d11933cc7c248394bf67c2b105211cf7931955816c741957832e703211030c7f4f002f
a4186dd wallet: Use boost to more portably ensure -wallet specifies only a filename (Luke Dashjr)
Tree-SHA512: 6dfde31fa599638e5ec76489363e2fed97403be3e5762e4560dfc6ac261ce169a92b5a1b92bb34a893cc898e6073c81f74f49528e8df07e86273ddb37dd1ce80
This was a long-standing and annoying problem.
If autogen.sh was not manually run after touching configure.ac,
bitcoin-config.h would not be properly regenerated. This causes very subtle
problems when configure appears to enable a new value, but it does not end up
reflected in the build.
c9e31c3 Clarify importprivkey help text with example of blank label without rescan Occasionally I waste a lot of time not remembering that the second parameter to importprivkey must be blank if you intend to stop rescan with "false" as the third parameter. (Warren Togami)
Tree-SHA512: 23781e1d6fd59a9d06d6e12ad10e8ed6641947b3e4a1f66c8fdb5d44cbd8f291e8f2a5e686aa9f9ba5e4bab8ca688caa17244e837f651546055ddf7cc8e7df8f
Occasionally I waste a lot of time not remembering that the second parameter to importprivkey must be blank if you intend to stop rescan with "false" as the third parameter.
This makes SetHDMasterKey responsible for maintinaing the CHDChain
version instead of always creating it with the latest version and
making EncryptWallet responsible for keeping the version from
changing.
b49ad44 Add comment about cs_most_recent_block coverage (Matt Corallo)
c47f5b7 Cache witness-enabled state with recent-compact-block-cache (Matt Corallo)
efc135f Use cached [compact] blocks to respond to getdata messages (Matt Corallo)
Tree-SHA512: ffc478bddbf14b8ed304a3041f47746520ce545bdeffa9652eff2ccb25c8b0d5194abe72568c10f9c1b246ee361176ba217767af834752a2ca7263d292005e87
This removes another callback from block connection logic, making it
easier to reason about the wallet-RPCs-returns-stale-info issue.
UpdatedTransaction was previously used by the GUI to display
coinbase transactions only after they have a block built on top of
them. This worked fine for in most cases, but only worked due to a
corner case if the user received a coinbase payout in a block
immediately prior to restart. In that case, the normal process of
caching the most recent coinbase transaction's hash would not work,
and instead it would only work because of the on-load -checkblocks
calling DisconnectBlock and ConnectBlock on the current tip.
In order to make this more robust, a full mapWallet loop after the
first block which is connected after restart was added.
c37e32a [Wallet] Prevent CInputCoin to be in a null state (NicolasDorier)
f597dcb [Wallet] Simplify code using CInputCoin (NicolasDorier)
e78bc45 [Wallet] Decouple CInputCoin from CWalletTx (NicolasDorier)
fd44ac1 [Wallet] Rename std::pair<const CWalletTx*, unsigned int> to CInputCoin (NicolasDorier)
Tree-SHA512: d24361fc514a0566bce1c3953d766dfe4fece79c549cb4db2600695a4ce08e85caa61b7717812618e523a2f2a1669877dad2752ed079e2ed2d27249f9bc8590e
d0cd0bd Make CWallet::SyncTransactions() interface friendlier (John Newbery)
714e4ad AddToWalletIfInvolvingMe should test pIndex, not posInBlock (John Newbery)
Tree-SHA512: d02e7ffce635c53f3e099c37cc5613b431f74e0e3ea189269132901a99fc539477849ddad0282ce721d46a4d794c2d46523d58b64f0c26c655f70b5808c745a5
8c3e6c6 Changed "Send" button default status from true to false (KibbledJiveElkZoo)
Tree-SHA512: e60d7481351e88925d99b33bdb616f3c234e93ef052571b9c4a1328186ec9abb8b61b0c4299afcb731edad2634aef6b1adaad121646b6c0c56dc933662904674
7fd50c3 allow libevent logging to be updated during runtime (John Newbery)
5255aca [rpc] Add logging RPC (John Newbery)
4d9950d Set BCLog::LIBEVENT correctly for old libevent versions. (John Newbery)
Tree-SHA512: d6788a7205372c0528da71eca052910dfb055f2940ca884f422ff3db66e23a2b49c6a15b8f27d5255554fe5c5a928f5dd903fdc63b0bd6c8fa7783e77bb30fe8
b1a6d4c Take a CTransactionRef in AddToWalletIfInvolvingMe to avoid a copy (Matt Corallo)
1c95e2f Use std::shared_ptr instead of boost::shared_ptr in ScriptForMining (Matt Corallo)
91f1e6c Remove dead-code tracking of requests for blocks we generated (Matt Corallo)
acad82f Add override to functions using CValidationInterface methods (Matt Corallo)
e6d5e6c Hold cs_wallet for whole block [dis]connection processing (Matt Corallo)
461e49f SyncTransaction->TxAddedToMempool/BlockConnected/Disconnected (Matt Corallo)
f404334 Handle SyncTransaction in ActivateBestChain instead of ConnectTrace (Matt Corallo)
a147687 Keep conflictedTxs in ConnectTrace per-block (Matt Corallo)
d3167ba Handle conflicted transactions directly in ConnectTrace (Matt Corallo)
29e6e23 Make ConnectTrace::blocksConnected private, hide behind accessors (Matt Corallo)
822000c Add pblock to connectTrace at the end of ConnectTip, not start (Matt Corallo)
f5e9a01 Include missing #include in zmqnotificationinterface.h (Matt Corallo)
Tree-SHA512: 8893d47559da3b28d2ef7359768547cba8a4b43b6f891d80f5848f995a84b1517bfb0f706fdc8cd43f09a1350349eb440d9724a59363ab517dfcc4fcb31b2018
218d915 [bench] Avoid function call arguments which are pointers to uninitialized values (practicalswift)
Tree-SHA512: 68d62e9442094f171433291b7f13dba20fc7ead5fd7f2292e1eb97ae51aa2345d40224c4a65c2e5d3552802b3cd0f675a82b6181cf5b77e964355650b25089f0
e9ff818 Fix for issues with startup and multiple monitors on windows. (Allan Doensen)
Tree-SHA512: 8502042a9b5a2fd6f5e409163bee9bd7c85e34c158754f393065f8cc6cdd0f8505b9a1803069d01fc1fb2df04d1b2ed6291388851f2ed3608eb2dd53fc22e06e
9ab9e7d Add a button to open the config file in a text editor (Eric Shaw Jr)
Tree-SHA512: 1d13be9ac788a05a5116dbb3e1136ef65732dc2b5634547860612658109668922c9ea80b77bde4ba5beaa762d54f2a986a6064d4e34e963cdcd3d126a4eced37
5f59d3e Improve CFeeBumper interface, add comments, make use of std::move (Jonas Schnelli)
0df22ed Cancel feebump is vErrors is not empty (Jonas Schnelli)
44cabe6 Use static calls for GetRequiredFee and GetMinimumFee, remove make_pair from emplace_back (Jonas Schnelli)
bb78c15 Restore CalculateMaximumSignedTxSize function signature (Jonas Schnelli)
51ea44f Use "return false" instead assert() in CWallet::SignTransaction (Jonas Schnelli)
bcc72cc Directly abort execution in FeeBumper::commit if wallet or tx is not available (Jonas Schnelli)
2718db0 Restore invalid fee check (must be > 0) (Jonas Schnelli)
0337a39 Refactor Bumpfee core functionality (Jonas Schnelli)
d1a95e8 Bumpfee move request parameter interaction to the top (Jonas Schnelli)
Tree-SHA512: 0e6d1f3322ed671fa2291e59ac9556ce4646bc78267edc6eedc46b0014b7b08aa83c30315358b911d82898847d4845634a18b67e253a7b699dcc852eb2652c07
9ff7818 doc: Update release process for simplified version bumping (Wladimir J. van der Laan)
08d9aee build: Remove duplicate version information from src/clientversion.h (Wladimir J. van der Laan)
168a703 doc: Make build system insert version in Doxyfile (Wladimir J. van der Laan)
b67eb8d doc: Remove version numbers from READMEs (Wladimir J. van der Laan)
Tree-SHA512: 531e44282b1c1383a382847a5605177917dfbf78acfaa754d1cbadd2e165c7e34ddbd01790f87615083fac359571708c2551ad24b712aab1f84a2068360c3a17
This simplifies fixing the wallet-returns-stale-info issue as we
can now hold cs_wallet across an entire block instead of only
per-tx (though we only actually do so in the next commit).
This change also removes the NOT_IN_BLOCK constant in favor of only
passing the CBlockIndex* parameter to SyncTransactions when a new
block is being connected, instead of also when a block is being
disconnected.
This change adds a parameter to BlockConnectedDisconnected which
lists the transactions which were removed from mempool due to
confliction as a result of this operation. While its somewhat of a
shame to make block-validation-logic generate a list of mempool
changes to be included in its generated callbacks, fixing this isnt
too hard.
Further in this change-set, CValidationInterface starts listening
to mempool directly, placing it in the middle and giving it a bit
of logic to know how to route notifications from block-validation,
mempool, etc (though not listening for conflicted-removals yet).
f110272 Remove `namespace fs=fs` (Wladimir J. van der Laan)
75594bd torcontrol: Use fs::path instead of std::string for private key path (Wladimir J. van der Laan)
2a5f574 Use fsbridge for fopen and freopen (Wladimir J. van der Laan)
bac5c9c Replace uses of boost::filesystem with fs (Wladimir J. van der Laan)
7d5172d Replace includes of boost/filesystem.h with fs.h (Wladimir J. van der Laan)
19e36bb Add fs.cpp/h (Wladimir J. van der Laan)
Tree-SHA512: 2c34f059dfa6850b9323f3389e9090a6b5f839a457a2960d182c2ecfafd9883c956f5928bb796613402d3aad68ebc78259796a7a313f4a6cfa98aaf507a66842
cd7f394 initialize flag variable to 0 (and continue if GetLogCategory() fails) (John Newbery)
Tree-SHA512: d0f2653bd0e71ed763220cb08d3a5335c5bdfe2f54ff7f9302d97f3265d7aa7f57606fe416a61aaac1535dbb046d0fb40a61f5a9d5cf234b042268e00ee7679d
9bef02e Bugfix: ancestor modifed fees were incorrect for descendants (Suhas Daftuar)
ba7dd8b Test prioritisetransaction and ancestor fee state (Suhas Daftuar)
Tree-SHA512: 01977d88e1afb093a003f22a6f29ea60df3d70a179fe7e55910b9c8c340c4af9fb20cdc804c40235b62c43c453f0194eda0d0d4dbd365d2d98347f5dbe5de01c
30f30c0 Add braces to submitblock per current style. (Gregory Maxwell)
4f15ea1 Check transaction count early in submitblock. (Gregory Maxwell)
ada0caa Make GetWitnessCommitmentIndex callable on blocks without a coinbase txn. (Gregory Maxwell)
Tree-SHA512: 02dcd337ad9cdd8e4fa6a42c009d016026d1229c193676ed6fcc9ce55e924fedec57f516ac1e95c3db0985243ba908307338ce783a70416cb292bed881002bfc
3bde556 Add -debugexclude option to switch off logging for specified components (John Newbery)
Tree-SHA512: 30202e3f2085fc2fc5dd4bedb92988f4cb162c612a42cf8f6395a7da326f34975ddc347f82bc4ddca6c84c438dc0cc6e87869f90c7ff88105dbeaa52a947fa43
6d5dd60 No need to use OpenSSL malloc/free (Thomas Snider)
Tree-SHA512: 29f790067ffd5a10a8e1a621318a0ba445691f57c804aa3b7c8ca372c8408d8c7fe703c42b48018e400fc32e3feff5ab401d97433910ce2c50e69da0b8a6662e
There is no point in even hashing a submitted block which doesn't have
a coinbase transaction.
This also results in more useful error reporting on corrupted input.
Thanks to rawodb for the bug report.
e9a6461 Make qt wallet test compatible with qt4 (Russell Yanofsky)
Tree-SHA512: a3e4598986cb3c5c20aaa1d440abc886d84fcc69a6ee4079787cfc8e3a2dce655060ff95612cb15ce8b5a9b8911e4afe2281345b59a4353ec32edf3771338381
