761392d [logging] log system time and mock time (John Newbery)
Tree-SHA512: 0a4b3ad74bcac201be490fe12e4b45adeabc39030ac46f40e1aeb2a20b2f3963e4468e65798d8aaeca1818759cab55ff2b2aa214500aa11571492c3301dd31c1
e3c9f2d Use a verbosity instead of two verbose parameters (Andrew Chow)
c99ab3c RPC: Allow multiple names for parameters (Luke Dashjr)
Tree-SHA512: 686b38f6b0106563738d51f55666fe6d49a5b121b30d4480c2bfb640a59ede8e6f7f3c05c3c5d80a5288e127991e191d19d1d4f9ace566fd39edeb27b31857ff
An off-by-one-block bug in importmulti rescan logic could cause it to return
success in an edge case even when a rescan was not successful. The case where
this would happen is if there were multiple blocks in a row with the same
GetBlockTimeMax() value, and the last block was scanned successfully, but one
or more of the earlier blocks was not readable.
Verbose is changed to an int. This can have values from 0-2 for each level of verbosity.
Verbosity level 2 has transaction details displayed in the results.
For the per confirmation number tracking of data, introduce a scale factor so that in the longer horizones confirmations are bucketed together at a resolution of the scale. (instead of 1008 individual data points for each fee bucket, have 42 data points each covering 24 different confirmation values.. (1-24), (25-48), etc.. )
Store in fee estimate file the block span for which we were tracking estimates, so we know what targets we can successfully evaluate with the data in the file. When restarting use either this historical block span to set valid range of targets until our current span of tracking estimates is just as long.
Track the first time we seen txs in a block that we have been tracking in our mempool. Used to evaluate validity of fee estimates for different targets.
Change the logic of estimateSmartFee to check a 60% threshold at half the target, a 85% threshold at the target and a 95% threshold at double the target. Always check the shortest time horizon possible and ensure that estimates are monotonically decreasing. Add a conservative mode, which makes sure that the 95% threshold is also met at longer time horizons as well.
Track information the ranges of fee rates that were used to calculate the fee estimates (the last range of fee rates in which the data points met the threshold and the first to fail) and provide an RPC call to return this information.
Instead of stopping if it encounters a "sufficient" number of transactions which don't meet the threshold for being confirmed within the target, it keeps looking to add more transactions to see if there is a temporary blip in the data. This allows a smaller number of required data points.
Cleanup request from #10287.
Change "Test #:" comments to "Test:"
Change BOOST_CHECK(... = ...) to BOOST_CHECK_EQUAL(..., ...)
Remove three unnecessary if statements
97477c5 Maintain state across GetStrongRandBytes calls (Pieter Wuille)
Tree-SHA512: 77e9b1f3c6eeb0c2a3e0c64358150767222ff0b7120ccd5f4ae0276cea0e4fa275c1b757e3f20be07dc0b4ef07f70ab0b70112080c8d3d0cb6ed703db8a59168
2c0a6f1 Use sanity check timestamps as entropy (Pieter Wuille)
33f853d Test that GetPerformanceCounter() increments (Pieter Wuille)
f544094 Use hardware timestamps in RNG seeding (Pieter Wuille)
Tree-SHA512: ea96ff56d425b5dc693b4dd35c8aa64ba20a01b9bd7d2d65298ece623f434e8cfa190f9c0f9b76df8aa496547bfa64533eb751edec8401d09bd5ee3478928a59
ed36de5 [tests] Update Unit Test for addrman.h/addrman.cpp (Jimmy Song)
Tree-SHA512: e7c08c19e227c34c230900e14a176b2290022b78b0ece387452e673662491c11f26249cbf1711235276c07a964c339e27b4cda9a2730ded5c0e23a650e0d72db
c1082a7 Chainparams: Use the factory for pow tests (Jorge Timón)
2351a06 Chainparams: Get rid of CChainParams& Params(std::string) (Jorge Timón)
f87f362 Chainparams: Use a regular factory for creating chainparams (Jorge Timón)
Tree-SHA512: 359c8a2a1bc9d02db7856d02810240ada28048ac088f878b575597a7255cdb0ffdd1a647085ee67a34c6a7e7ed9e6cfdb61240cf6e75139619b640dbb096072c
381a46e Consensus: Policy: MOVEONLY: Move CFeeRate out of the consensus module (Jorge Timón)
330bb5a Consensus: Minimal way to move dust out of consensus (Jorge Timón)
Tree-SHA512: 19a2ea8169afd5a9d3f940d8974e34cfaead153e3ff3068ac82fccdb8694d19d9b45938904ec9e8cd095bd5ca3a0080364da29372f6aaf56b11a6c2ccd6c7a4d
3a0a5bc [doc] Add hint about getmempoolentry to getrawmempool help. (Karl-Johan Alm)
Tree-SHA512: 8327d7d7ad93296525fbf95b7a824e3525bde84653999f125afd845823eb39e3a03cd39725962ed949aa2b9ad207ecad6d287294fa321ff1a4d7fbd5a4b8560b
0f3471f net: make CNode's id private (Cory Fields)
9ff0a51 scripted-diff: net: Use accessor rather than node's id directly (Cory Fields)
e50c33e devtools: add script to verify scriptable changes (Cory Fields)
Tree-SHA512: a0ff50f4e1d38a2b63109b4996546c91b3e02e00d92c0bf04f48792948f78b1f6d9227a15d25c823fd4723a0277fc6a32c2c1287c7abbb7e50fd82ffb0f8d994
vToFetch is never used after declaration. When checked if not empty,
evaluation is always false. Best case scenario this is optimized by the
compiler, worst case it wastes cpu cycles. It should be removed either
way.
84973d3 Merge #454: Remove residual parts from the schnorr expirement.
5e95bf2 Remove residual parts from the schnorr expirement.
cbc20b8 Merge #452: Minor optimizations to _scalar_inverse to save 4M
4cc8f52 Merge #437: Unroll secp256k1_fe_(get|set)_b32 to make them much faster.
465159c Further shorten the addition chain for scalar inversion.
a2b6b19 Fix benchmark print_number infinite loop.
8b7680a Unroll secp256k1_fe_(get|set)_b32 for 10x26.
aa84990 Unroll secp256k1_fe_(get|set)_b32 for 5x52.
cf12fa1 Minor optimizations to _scalar_inverse to save 4M
1199492 Merge #408: Add `secp256k1_ec_pubkey_negate` and `secp256k1_ec_privkey_negate`
6af0871 Merge #441: secp256k1_context_randomize: document.
ab31a52 Merge #444: test: Use checked_alloc
eda5c1a Merge #449: Remove executable bit from secp256k1.c
51b77ae Remove executable bit from secp256k1.c
5eb030c test: Use checked_alloc
72d952c FIXUP: Missing "is"
70ff29b secp256k1_context_randomize: document.
9d560f9 Merge #428: Exhaustive recovery
8e48aa6 Add `secp256k1_ec_pubkey_negate` and `secp256k1_ec_privkey_negate`
2cee5fd exhaustive tests: add recovery module
678b0e5 exhaustive tests: remove erroneous comment from ecdsa_sig_sign
03ff8c2 group_impl.h: remove unused `secp256k1_ge_set_infinity` function
a724d72 configure: add --enable-coverage to set options for coverage analysis
b595163 recovery: add tests to cover API misusage
6f8ae2f ecdh: test NULL-checking of arguments
25e3cfb ecdsa_impl: replace scalar if-checks with VERIFY_CHECKs in ecdsa_sig_sign
git-subtree-dir: src/secp256k1
git-subtree-split: 84973d393ac240a90b2e1a6538c5368202bc2224
Rather than re-add disconnected block transactions back to the mempool
immediately, store them in a separate disconnectpool for later processing,
because we expect most such transactions to reappear in the chain that is
still to be connected (and thus we can avoid the work of reprocessing those
transactions through the mempool altogether).
a750d77 Add tests for mempool persistence (John Newbery)
91c91e1 Control mempool persistence using a command line parameter. (John Newbery)
Tree-SHA512: 157d01cefd1903b8bfc5cbab42a3cc5e9c1094179bf4b64b3d34c0d4d9b976d593755bfea5c41c631cb758e1de17c6c2058c130d487d20560b7c0bafcddfa520
185c7f0 Avoid reading the old hd master key during wallet encryption (Matt Corallo)
Tree-SHA512: b744e8490c0e948355bb77b2695902bb99f89a68af46aa2be9120bd2ccf3c340eb8a56340fec117f9a935192298028945c9b18120ee6b8b23e7da8ffdb635745
Add test for adding multiple addresses to address manager
Clean up unnecessary modulo operations
Add test for GetNewBucket's alternate method signature
d6732d8 [tests] update disconnect_ban.py test case to work with listbanned (John Newbery)
77c54b2 [net] listbanned RPC and QT should show correct banned subnets (John Newbery)
Tree-SHA512: edd0e43377d456260d2697213c2829f8483630f3a668b6707d52605faefa610d951d10e6f22a95eff483cbd14faa8ac9b69fa7d3c0b5735c5f3df23fd71282e0
7c58863 [Wallet] unset change position when there is no change on exact match (Gregory Sanders)
Tree-SHA512: ce8b9337e4132e32d80f954258d50938052c833a48e39431649d6adb16e3d18626a0ae5d300827e7fa397927fba72a1f066cb31af9b0a3ef7f1feb6024461626
DisconnectBlock currently has a complicated interface:
Situation Return value
pfClean != nullptr pfClean == nullptr
All good: true true
Failure: false false
Unclean rewind: true false
with *pfClean=false
Change this to return a tristate enum instead. As an added bonus,
remove the ValidationState& argument which was unused.
b51aaf1 Remove unused C++ code not covered by unit tests (practicalswift)
Tree-SHA512: 267bbd87df01a296bf23e82a8b6ee968e13e23a6aaecc535d803890a3e3e9f6208c7fc4c1f97afd98ed3e498b12fe1ada7e3cb2977ad12359a813f57336c74e5
dcb69fd [test] Unit test amount.h/amount.cpp (Jimmy Song)
Tree-SHA512: dc50e6158322a282a8b8b60c8eab7ce327a33c48113a1455b8a1784f07e6277ad499e85ec978199468a2dc34e9e288287c8803c215f810fa2d841cdda9a414f5
This adds a simpler new implementation of getbalance logic along with asserts
to confirm it behaves identically to the old logic. The old logic is removed in
the next commit.
1b14449 [test] Add Unit Test for GetListenPort (Jimmy Song)
Tree-SHA512: aea5f60fb3699680cc5acac9d9c8d8712634db9d629bbfa1815a29e5cf46c22f783886c608664baaa91b3282c52ce8069c358850cf4f90acf731a9e6c1701caa
c36ea69 [wallet] Make sure pindex is non-null before possibly referencing in LogPrintf call. (Karl-Johan Alm)
Tree-SHA512: a14c9f3e1228bca91977bea821c56a377d80889b41d250050c9be67aa93e460319a7cf1d4b63ee40f23b5a34159590f0e3fe15dc88698dc694c0c8098bd2db4d
e6756ad Switch CCoinsMap from boost to std unordered_map (Pieter Wuille)
344a2c4 Add support for std::unordered_{map,set} to memusage.h (Pieter Wuille)
Tree-SHA512: 51288301e7c0f29ffac8c59f4cc73ddc36b7abeb764009da6543f2eaeeb9f89bd47dde48131a7e0aefad8f7cb0b74b2f33b8be052c8e8a718339c3e6bb963447
911a480 wallet: Add comment describing the various classes in walletdb.h (Wladimir J. van der Laan)
69d2e9b wallet: Make IsDummy private in CWalletDBWrapper (Wladimir J. van der Laan)
3323281 wallet: CWalletDB CDB composition not inheritance (Wladimir J. van der Laan)
be9e1a9 wallet: Reduce references to global bitdb environment (Wladimir J. van der Laan)
071c955 wallet: Get rid of fFileBacked (Wladimir J. van der Laan)
71afe3c wallet: Introduce database handle wrapper (Wladimir J. van der Laan)
Tree-SHA512: e4e72953c61a2f6995d609a32f8ed8e18cab9a92bc9e193d46a1d1f06d9daa5c6da6fce2867d4e3ba4fc0439141901a3d35f246486f0fa8f59587786379dfcbd
dd07068 Fixed typo in documentation for merkleblock.h (Mikerah)
Tree-SHA512: 92655c8022eb33852c116da517b12bd17b3b668713cd85fe185a15245ea9810605626b1d0955fa117f7b56863e0a52b3a86dab42409332452b5eb72a7d34f30d
Move buckets and bucketMap to be stored as part of overall serialization of estimator.
Add some placeholder data so file format is only changed once.
Maintain 3 different TxConfirmStats with potential for different decays and scales.
68af651 MOVEONLY: move TxConfirmStats to cpp (Alex Morcos)
2332f19 Initialize TxConfirmStats in constructor (Alex Morcos)
5ba81e5 Read and Write fee estimate file directly from CBlockPolicyEstimator (Alex Morcos)
14e10aa Call estimate(Smart)Fee directly from CBlockPolicyEstimator (Alex Morcos)
dbb9e36 Give CBlockPolicyEstimator it's own lock (Alex Morcos)
f6187d6 Make processBlockTx private. (Alex Morcos)
ae7327b Make feeEstimator its own global instance of CBlockPolicyEstimator (Alex Morcos)
Tree-SHA512: dbf3bd2b30822e609a35f3da519b62d23f8a50e564750695ddebd08553b4c01874ae3e07d792c6cc78cc377d2db33b951ffedc46ac7edaf5793f9ebb931713af
CWalletDB now contains a CDB instead of inheriting from it.
This makes it easier to replace the internal transaction with a different
database, without leaking through internals.
Instead, CWalletDB() with a dummy handle will just give you a no-op
database in which writes always succeeds and reads always fail. CDB
already had functionality for this, so just use that.
Abstract database handle from explicit strFilename into
CWalletDBWrapper.
Also move CWallet::Backup to db.cpp - as it deals with representation
details this is a database specific operation.
4082fb0 Add missing <atomic> header in clientmodel.h (Jonas Schnelli)
928d4a9 Set both time/height header caches at the same time (Jonas Schnelli)
610a917 Declare headers height/time cache mutable, re-set the methods const (Jonas Schnelli)
cf92bce Update the remaining blocks left in modaloverlay at init. (Jonas Schnelli)
7148f5e Reduce cs_main locks during modal overlay by adding an atomic cache (Jonas Schnelli)
Tree-SHA512: a92ca22f90b8b2a5e8eb94fdce531ef44542e21a8dbbb0693f7723d7018592cb68de687a2a0aac91d31cbf019793f8e922550656d2b130ed3d854d60630341db
disconnectnode() can currently only be called with the IP address/port
of the node the user wishes to connect. This commit allows the node to
be disconnected using the nodeid returned by getpeerinfo().
608bbcc [qt] Stop treating coinbase outputs differently: show them at 1conf (Matt Corallo)
Tree-SHA512: 62ba10520da8b83cf8e97c86dec3ccdcca8b7bfae0174d1a4099d33aa5d11933cc7c248394bf67c2b105211cf7931955816c741957832e703211030c7f4f002f
a4186dd wallet: Use boost to more portably ensure -wallet specifies only a filename (Luke Dashjr)
Tree-SHA512: 6dfde31fa599638e5ec76489363e2fed97403be3e5762e4560dfc6ac261ce169a92b5a1b92bb34a893cc898e6073c81f74f49528e8df07e86273ddb37dd1ce80
This was a long-standing and annoying problem.
If autogen.sh was not manually run after touching configure.ac,
bitcoin-config.h would not be properly regenerated. This causes very subtle
problems when configure appears to enable a new value, but it does not end up
reflected in the build.
c9e31c3 Clarify importprivkey help text with example of blank label without rescan Occasionally I waste a lot of time not remembering that the second parameter to importprivkey must be blank if you intend to stop rescan with "false" as the third parameter. (Warren Togami)
Tree-SHA512: 23781e1d6fd59a9d06d6e12ad10e8ed6641947b3e4a1f66c8fdb5d44cbd8f291e8f2a5e686aa9f9ba5e4bab8ca688caa17244e837f651546055ddf7cc8e7df8f
Occasionally I waste a lot of time not remembering that the second parameter to importprivkey must be blank if you intend to stop rescan with "false" as the third parameter.
This makes SetHDMasterKey responsible for maintinaing the CHDChain
version instead of always creating it with the latest version and
making EncryptWallet responsible for keeping the version from
changing.
b49ad44 Add comment about cs_most_recent_block coverage (Matt Corallo)
c47f5b7 Cache witness-enabled state with recent-compact-block-cache (Matt Corallo)
efc135f Use cached [compact] blocks to respond to getdata messages (Matt Corallo)
Tree-SHA512: ffc478bddbf14b8ed304a3041f47746520ce545bdeffa9652eff2ccb25c8b0d5194abe72568c10f9c1b246ee361176ba217767af834752a2ca7263d292005e87
This removes another callback from block connection logic, making it
easier to reason about the wallet-RPCs-returns-stale-info issue.
UpdatedTransaction was previously used by the GUI to display
coinbase transactions only after they have a block built on top of
them. This worked fine for in most cases, but only worked due to a
corner case if the user received a coinbase payout in a block
immediately prior to restart. In that case, the normal process of
caching the most recent coinbase transaction's hash would not work,
and instead it would only work because of the on-load -checkblocks
calling DisconnectBlock and ConnectBlock on the current tip.
In order to make this more robust, a full mapWallet loop after the
first block which is connected after restart was added.
c37e32a [Wallet] Prevent CInputCoin to be in a null state (NicolasDorier)
f597dcb [Wallet] Simplify code using CInputCoin (NicolasDorier)
e78bc45 [Wallet] Decouple CInputCoin from CWalletTx (NicolasDorier)
fd44ac1 [Wallet] Rename std::pair<const CWalletTx*, unsigned int> to CInputCoin (NicolasDorier)
Tree-SHA512: d24361fc514a0566bce1c3953d766dfe4fece79c549cb4db2600695a4ce08e85caa61b7717812618e523a2f2a1669877dad2752ed079e2ed2d27249f9bc8590e
d0cd0bd Make CWallet::SyncTransactions() interface friendlier (John Newbery)
714e4ad AddToWalletIfInvolvingMe should test pIndex, not posInBlock (John Newbery)
Tree-SHA512: d02e7ffce635c53f3e099c37cc5613b431f74e0e3ea189269132901a99fc539477849ddad0282ce721d46a4d794c2d46523d58b64f0c26c655f70b5808c745a5
8c3e6c6 Changed "Send" button default status from true to false (KibbledJiveElkZoo)
Tree-SHA512: e60d7481351e88925d99b33bdb616f3c234e93ef052571b9c4a1328186ec9abb8b61b0c4299afcb731edad2634aef6b1adaad121646b6c0c56dc933662904674
7fd50c3 allow libevent logging to be updated during runtime (John Newbery)
5255aca [rpc] Add logging RPC (John Newbery)
4d9950d Set BCLog::LIBEVENT correctly for old libevent versions. (John Newbery)
Tree-SHA512: d6788a7205372c0528da71eca052910dfb055f2940ca884f422ff3db66e23a2b49c6a15b8f27d5255554fe5c5a928f5dd903fdc63b0bd6c8fa7783e77bb30fe8
b1a6d4c Take a CTransactionRef in AddToWalletIfInvolvingMe to avoid a copy (Matt Corallo)
1c95e2f Use std::shared_ptr instead of boost::shared_ptr in ScriptForMining (Matt Corallo)
91f1e6c Remove dead-code tracking of requests for blocks we generated (Matt Corallo)
acad82f Add override to functions using CValidationInterface methods (Matt Corallo)
e6d5e6c Hold cs_wallet for whole block [dis]connection processing (Matt Corallo)
461e49f SyncTransaction->TxAddedToMempool/BlockConnected/Disconnected (Matt Corallo)
f404334 Handle SyncTransaction in ActivateBestChain instead of ConnectTrace (Matt Corallo)
a147687 Keep conflictedTxs in ConnectTrace per-block (Matt Corallo)
d3167ba Handle conflicted transactions directly in ConnectTrace (Matt Corallo)
29e6e23 Make ConnectTrace::blocksConnected private, hide behind accessors (Matt Corallo)
822000c Add pblock to connectTrace at the end of ConnectTip, not start (Matt Corallo)
f5e9a01 Include missing #include in zmqnotificationinterface.h (Matt Corallo)
Tree-SHA512: 8893d47559da3b28d2ef7359768547cba8a4b43b6f891d80f5848f995a84b1517bfb0f706fdc8cd43f09a1350349eb440d9724a59363ab517dfcc4fcb31b2018
218d915 [bench] Avoid function call arguments which are pointers to uninitialized values (practicalswift)
Tree-SHA512: 68d62e9442094f171433291b7f13dba20fc7ead5fd7f2292e1eb97ae51aa2345d40224c4a65c2e5d3552802b3cd0f675a82b6181cf5b77e964355650b25089f0
e9ff818 Fix for issues with startup and multiple monitors on windows. (Allan Doensen)
Tree-SHA512: 8502042a9b5a2fd6f5e409163bee9bd7c85e34c158754f393065f8cc6cdd0f8505b9a1803069d01fc1fb2df04d1b2ed6291388851f2ed3608eb2dd53fc22e06e
9ab9e7d Add a button to open the config file in a text editor (Eric Shaw Jr)
Tree-SHA512: 1d13be9ac788a05a5116dbb3e1136ef65732dc2b5634547860612658109668922c9ea80b77bde4ba5beaa762d54f2a986a6064d4e34e963cdcd3d126a4eced37
5f59d3e Improve CFeeBumper interface, add comments, make use of std::move (Jonas Schnelli)
0df22ed Cancel feebump is vErrors is not empty (Jonas Schnelli)
44cabe6 Use static calls for GetRequiredFee and GetMinimumFee, remove make_pair from emplace_back (Jonas Schnelli)
bb78c15 Restore CalculateMaximumSignedTxSize function signature (Jonas Schnelli)
51ea44f Use "return false" instead assert() in CWallet::SignTransaction (Jonas Schnelli)
bcc72cc Directly abort execution in FeeBumper::commit if wallet or tx is not available (Jonas Schnelli)
2718db0 Restore invalid fee check (must be > 0) (Jonas Schnelli)
0337a39 Refactor Bumpfee core functionality (Jonas Schnelli)
d1a95e8 Bumpfee move request parameter interaction to the top (Jonas Schnelli)
Tree-SHA512: 0e6d1f3322ed671fa2291e59ac9556ce4646bc78267edc6eedc46b0014b7b08aa83c30315358b911d82898847d4845634a18b67e253a7b699dcc852eb2652c07
9ff7818 doc: Update release process for simplified version bumping (Wladimir J. van der Laan)
08d9aee build: Remove duplicate version information from src/clientversion.h (Wladimir J. van der Laan)
168a703 doc: Make build system insert version in Doxyfile (Wladimir J. van der Laan)
b67eb8d doc: Remove version numbers from READMEs (Wladimir J. van der Laan)
Tree-SHA512: 531e44282b1c1383a382847a5605177917dfbf78acfaa754d1cbadd2e165c7e34ddbd01790f87615083fac359571708c2551ad24b712aab1f84a2068360c3a17
This simplifies fixing the wallet-returns-stale-info issue as we
can now hold cs_wallet across an entire block instead of only
per-tx (though we only actually do so in the next commit).
This change also removes the NOT_IN_BLOCK constant in favor of only
passing the CBlockIndex* parameter to SyncTransactions when a new
block is being connected, instead of also when a block is being
disconnected.
This change adds a parameter to BlockConnectedDisconnected which
lists the transactions which were removed from mempool due to
confliction as a result of this operation. While its somewhat of a
shame to make block-validation-logic generate a list of mempool
changes to be included in its generated callbacks, fixing this isnt
too hard.
Further in this change-set, CValidationInterface starts listening
to mempool directly, placing it in the middle and giving it a bit
of logic to know how to route notifications from block-validation,
mempool, etc (though not listening for conflicted-removals yet).
f110272 Remove `namespace fs=fs` (Wladimir J. van der Laan)
75594bd torcontrol: Use fs::path instead of std::string for private key path (Wladimir J. van der Laan)
2a5f574 Use fsbridge for fopen and freopen (Wladimir J. van der Laan)
bac5c9c Replace uses of boost::filesystem with fs (Wladimir J. van der Laan)
7d5172d Replace includes of boost/filesystem.h with fs.h (Wladimir J. van der Laan)
19e36bb Add fs.cpp/h (Wladimir J. van der Laan)
Tree-SHA512: 2c34f059dfa6850b9323f3389e9090a6b5f839a457a2960d182c2ecfafd9883c956f5928bb796613402d3aad68ebc78259796a7a313f4a6cfa98aaf507a66842
cd7f394 initialize flag variable to 0 (and continue if GetLogCategory() fails) (John Newbery)
Tree-SHA512: d0f2653bd0e71ed763220cb08d3a5335c5bdfe2f54ff7f9302d97f3265d7aa7f57606fe416a61aaac1535dbb046d0fb40a61f5a9d5cf234b042268e00ee7679d
9bef02e Bugfix: ancestor modifed fees were incorrect for descendants (Suhas Daftuar)
ba7dd8b Test prioritisetransaction and ancestor fee state (Suhas Daftuar)
Tree-SHA512: 01977d88e1afb093a003f22a6f29ea60df3d70a179fe7e55910b9c8c340c4af9fb20cdc804c40235b62c43c453f0194eda0d0d4dbd365d2d98347f5dbe5de01c
30f30c0 Add braces to submitblock per current style. (Gregory Maxwell)
4f15ea1 Check transaction count early in submitblock. (Gregory Maxwell)
ada0caa Make GetWitnessCommitmentIndex callable on blocks without a coinbase txn. (Gregory Maxwell)
Tree-SHA512: 02dcd337ad9cdd8e4fa6a42c009d016026d1229c193676ed6fcc9ce55e924fedec57f516ac1e95c3db0985243ba908307338ce783a70416cb292bed881002bfc
3bde556 Add -debugexclude option to switch off logging for specified components (John Newbery)
Tree-SHA512: 30202e3f2085fc2fc5dd4bedb92988f4cb162c612a42cf8f6395a7da326f34975ddc347f82bc4ddca6c84c438dc0cc6e87869f90c7ff88105dbeaa52a947fa43
6d5dd60 No need to use OpenSSL malloc/free (Thomas Snider)
Tree-SHA512: 29f790067ffd5a10a8e1a621318a0ba445691f57c804aa3b7c8ca372c8408d8c7fe703c42b48018e400fc32e3feff5ab401d97433910ce2c50e69da0b8a6662e
There is no point in even hashing a submitted block which doesn't have
a coinbase transaction.
This also results in more useful error reporting on corrupted input.
Thanks to rawodb for the bug report.
e9a6461 Make qt wallet test compatible with qt4 (Russell Yanofsky)
Tree-SHA512: a3e4598986cb3c5c20aaa1d440abc886d84fcc69a6ee4079787cfc8e3a2dce655060ff95612cb15ce8b5a9b8911e4afe2281345b59a4353ec32edf3771338381
This changes the logging categories to boolean flags instead of strings.
This simplifies the acceptance testing by avoiding accessing a scoped
static thread local pointer to a thread local set of strings. It
eliminates the only use of boost::thread_specific_ptr outside of
lockorder debugging.
This change allows log entries to be directed to multiple categories
and makes it easy to change the logging flags at runtime (e.g. via
an RPC, though that isn't done by this commit.)
It also eliminates the fDebug global.
Configuration of unknown logging categories now produces a warning.
Since we are more accurately measuring pcoinsTip peak usage at twice the current in dynamic usage, it makes sense to double the default (this will lead to the same effective usage and peak usage as previously).
We should also double the buffer used to avoid flushing if above 90% but still sufficient space remaining.
f885b67 refactor: Make rest.cpp dependency on `*toJSON` in `blockchain.cpp` explicit (Wladimir J. van der Laan)
8d8f28d refactor: Move RPCNotifyBlockChange out of `rpc/server.h` (Wladimir J. van der Laan)
e6dcfee refactor: Move GetDifficulty out of `rpc/server.h` (Wladimir J. van der Laan)
Tree-SHA512: fc2656611d18442f2fddba5ac1554d958151f6785c2039afdfc36735d7e71592d9686ff6cc7b2ad95180071d7514470e62c52d697c5a1e88f851bddaf5942edb
7228ce8 Compensate for memory peak at flush time (Pieter Wuille)
Tree-SHA512: 97e9848410fab061402c85d8440c54a50dd8a0203b2ea194013ea116700a6dc1b4b26b8c5f9c9c68c1f5c6b935c5d6c737437c1911b003d9ff5445c570cd449d
625488a util: Work around (virtual) memory exhaustion on 32-bit w/ glibc (Wladimir J. van der Laan)
Tree-SHA512: 99b610a8cf9561998af90e16fc19320fddd30c987e8f33325d63df0f56d70235b94d9482e80f28154d4b33a3ecf4961686380c444ec18d1da5e8804a8b6f4de1
The number of arguments is not checked MutateTxAddOutAddr(..), meaning
that
> ./bitcoin-tx -create outaddr=
accessed the vStrInputParts vector beyond its bounds.
This also includes work by jnewbery to check the inputs for
MutateTxAddPubKey()
011124a Update benchmarking with package statistics (Suhas Daftuar)
42cd8c8 Add benchmarking for CreateNewBlock (Suhas Daftuar)
eed816a Mining: return early when block is almost full (Suhas Daftuar)
Tree-SHA512: c0d8f71e4e0441acf3f4ca12f8705e413b59b323659346a447145653def71710537fb4c6d80cad8e36d68b0aabf19c92e9eab7135a8897b053ed58720856cdda
glibc-specific: On 32-bit systems set the number of arenas to 1. By
default, since glibc 2.10, the C library will create up to two heap
arenas per core. This is known to cause excessive virtual address space
usage in our usage. Work around it by setting the maximum number of
arenas to 1.
4115af7 Fix rebase issue where pwalletMain was used instead of pwallet Ser./Deser. nInternalChainCounter as last element (Jonas Schnelli)
9382f04 Do not break backward compatibility during wallet encryption (Jonas Schnelli)
1df08d1 Add assertion for CanSupportFeature(FEATURE_HD_SPLIT) (Jonas Schnelli)
cd468d0 Define CWallet::DeriveNewChildKey() as private (Jonas Schnelli)
ed79e4f Optimize GetOldestKeyPoolTime(), return as soon as we have both oldest keys (Jonas Schnelli)
771a304 Make sure we set the wallets min version to FEATURE_HD_SPLIT at the very first point (Jonas Schnelli)
1b3b5c6 Slightly modify fundrawtransaction.py test (change getnewaddress() into getrawchangeaddress()) (Jonas Schnelli)
003e197 Remove FEATURE_HD_SPLIT bump TODO (Jonas Schnelli)
d9638e5 Overhaul the internal/external key derive switch (Jonas Schnelli)
1090502 Fix superfluous cast and code style nits in RPC wallet-hd.py test (Jonas Schnelli)
58e1483 CKeyPool avoid "catch (...)" in SerializationOp (Jonas Schnelli)
e138876 Only show keypoolsize_hd_internal if HD split is enabled (Jonas Schnelli)
add38d9 GetOldestKeyPoolTime: if HD & HD Chain Split is enabled, response max(oldest-internal-key, oldest-external-key) (Jonas Schnelli)
dd526c2 Don't switch to HD-chain-split during wallet encryption of non HD-chain-split wallets (Jonas Schnelli)
79df9df Switch to 100% for the HD internal keypool size (Jonas Schnelli)
bcafca1 Make sure we always generate one keypool key at minimum (Jonas Schnelli)
d0a627a Fix issue where CDataStream->nVersion was taken a CKeyPool record version (Jonas Schnelli)
9af8f00 Make sure we hand out keypool keys if HD_SPLIT is not enabled (Jonas Schnelli)
469a47b Make sure ReserveKeyFromKeyPool only hands out internal keys if HD_SPLIT is supported (Jonas Schnelli)
05a9b49 Fix wrong keypool internal size in RPC getwalletinfo help (Jonas Schnelli)
01de822 Removed redundant IsLocked() check in NewKeyPool() (Jonas Schnelli)
d59531d Immediately return setKeyPool's size if HD or HD_SPLIT is disabled or not supported (Jonas Schnelli)
02592f4 [Wallet] split the keypool in an internal and external part (Jonas Schnelli)
Tree-SHA512: 80d355d5e844b48c3163b56c788ab8b5b5285db0ceeb19858a3ef517d5a702afeca21dbae526d7b8fb4101c2a745af1d92bf557c40cf516780f17992bf678c1a
fa55853 rpc: Rename first named arg of createrawtransaction (MarcoFalke)
Tree-SHA512: f2e07183f2503344e676e08fe0fd73e995d7c6fda3fc11c64116208dec8e445f0627583dfba85014129b6f2dc7e253b9d760e57e66811272db89e9ba25ce6dbc
0fb2887 Move several relay options into the Relay help group (Jameson Lopp)
Tree-SHA512: 31fdfd8c741adb6fe6806a28955f0fbbc9360b1d8c3d8a28684794822f1b3231fffab93357357d986b81a4532c9eeabb79e5ede9378ff3ad8930ceb6588d9eb6
Unlike Qt5, the Qt4 signals implementation doesn't allow a signal to be
directly connected to a c++ lambda expression. Work around this by defining a
Callback QObject with a virtual method that can forward calls to a closure.
The Qt4 error was reported by Patrick Strateman <patrick.strateman@gmail.com>
in https://github.com/bitcoin/bitcoin/pull/10039#issuecomment-289248763
It has no business in `rpcserver.h`. Define it in the interface header
of the implementation unit `rpcblockchain` where it is defined.
Also modernize the signature to:
double GetDifficulty(const CBlockIndex* blockindex = nullptr);
(remove `extern`, replace `NULL` with `nullptr`)
4df76e2 Ensure an item exists on the rpcconsole stack before adding (Andrew Chow)
Tree-SHA512: f3fd5e70da186949aff794f6e2ba122da2145331212dcc5e0595285bee9dc3aa6b400b15e8eeec4476099965b74f46c4ef80f8ed1e05d490580167b002b9a5e7
b1f584d fix build if spaces in src dir path (Matthew Zipkin)
Tree-SHA512: 5834690c1f63b85ed04bb8ed411a94da04738534364d58bd9ee333ccff7129b2bbb710f31598c40123199e023da02c1745514294af3efdbb2c2e4c1320aded35
c4a6929 Clarify assumptions made about when BlockCheck is called (Matt Corallo)
Tree-SHA512: 2eceb0c4f06c7fd6b290b93843bda11a4b63131559c5e8226bfec84596ed4e54ee6d8f5bc9cf789a80675be8b8079cf9234c96032df306258cb2260b9d8c7825
Mempool persistence was added in
3f78562df5, and is always on. This commit
introduces a command-line parameter -persistmempool, which defaults to
true. When set to false:
- mempool.dat is not loaded when the node starts.
- mempool.dat is not written when the node stops.
Construct scoped_connection directly instead of relying on copy initialization
and move constructor. Avoids the following compile error in debian jessie:
```
In file included from /usr/include/boost/signals2/signal.hpp:21:0,
from ./util.h:29,
from ./dbwrapper.h:11,
from ./txdb.h:10,
from ./test/test_bitcoin.h:11,
from qt/test/wallettests.cpp:11:
/usr/include/boost/signals2/connection.hpp: In function ‘uint256 {anonymous}::SendCoins(CWallet&, SendCoinsDialog&, const CBitcoinAddress&, CAmount)’:
/usr/include/boost/signals2/connection.hpp:234:7: error: ‘boost::signals2::scoped_connection::scoped_connection(const boost::signals2::scoped_connection&)’ is private
scoped_connection(const scoped_connection &other);
^
qt/test/wallettests.cpp:47:6: error: within this context
});
^
```
Error reported by Pavel Janík <Pavel@Janik.cz> in
https://github.com/bitcoin/bitcoin/pull/9974#issuecomment-287550034
e141aa4 Add mallocinfo mode to `getmemoryinfo` RPC (Wladimir J. van der Laan)
Tree-SHA512: e778631765c29b3b5fb94eb66e5f50a8f108a234891bdcc4883f1e6e2fdd223f7660fad987eb2d7cbda5b800482d78adc1a309a3f6f83a84c556af43ebee2ed7
This adds a mode argument to `getmemoryinfo`. By default the output
will remain the same. However if a mode argument of `mallocinfo` is
provided the result of glibc `malloc_info` (if available) will
be returned as a string, as-is.
This is useful for tracking heap usage over time or troubleshooting
memory fragmentation issues.
d93b97f Set to nullptr after delete (practicalswift)
Tree-SHA512: 7201cef4541557ffe31f52ce7527c4b08a2ff5aa1eae5268bdfee5b4843881f8fd115257bef6d1b4dfb71166951950a912ce87aef160ca89c2ca2ae264cfab1b
d7f80b6 Rename first iterator to prevent shadowing. (Pavel Janík)
b42ff60 Fix shadowing of local variables. (Pavel Janík)
c4b60b3 Make some global variables less-global (static) (Pavel Janík)
bb2aaee Prevent -Wshadow warnings with gcc versions 4.8.5, 5.3.1 and 6.2.1. (Pavel Janík)
Tree-SHA512: 3aea4e28146c8f2a31351c6e2b0cce88b6f1e567a0ea0e6131624453e7193d0904e30d81b1439d8c69e281cf0e369b895851fb882ae48d5967b5c2e2c227404e
7759aa2 Save watch only key timestamps when reimporting keys (Russell Yanofsky)
Tree-SHA512: 433b5a78e5626fb2f3166e6c84c22eabd5239d451dc82694da95af237e034612a24f1a8bc959b7d2f2e576ce0b679be1fa4af929ebfae758c7e832056ab67061
9576b01 Enable xvfb in travis to allow running test_bitcoin-qt (Russell Yanofsky)
9e6817e Add new test_bitcoin-qt static library dependencies (Russell Yanofsky)
2754ef1 Add simple qt wallet test sending a transaction (Russell Yanofsky)
b61b34c Add braces to if statements in Qt test_main (Russell Yanofsky)
cc9503c Make qt test compatible with TestChain100Setup framework (Russell Yanofsky)
91e3035 Make test_bitcoin.cpp compatible with Qt Test framework (Russell Yanofsky)
Tree-SHA512: da491181848b8c39138e997ae5ff2df0b16eef2d9cdd0a965229b1a28d4fa862d5f1ef314a1736e5050e88858f329124d15c689659fc6e50fefde769ba24e523
a4d1c9f compat: use `unsigned int` instead of `u_int` (Wladimir J. van der Laan)
25da1ee build: cleanup: define MSG_DONTWAIT/MSG_NO_SIGNAL locally (Wladimir J. van der Laan)
c459d50 build: Probe MSG_DONTWAIT in the same way as MSG_NOSIGNAL (Wladimir J. van der Laan)
Tree-SHA512: 60d79d69439bb181465e4244aa5ddc28bbd84f69c0ca0c753956b3798c9022394e29d791bc085fe7ffb1268c64c789a57e24797daad63525bb776088188ff9ae
Avoids following error when qt is statically linked into the test binary, as on
travis:
This application failed to start because it could not find or load the Qt platform plugin "xcb"
in "".
7abe7bb Qt/Send: Give fallback fee a reasonable indent (Luke Dashjr)
3e4d7bf Qt/Send: Figure a decent warning colour from theme (Luke Dashjr)
c5adf8f [Qt] Show more significant warning if we fall back to the default fee (Jonas Schnelli)
Tree-SHA512: 9e85b5b398d7a49aaf6c42578d63750b1b7aa9cc9e84d008fe21d6c53f1ffe2fb69286a1a764e634ebca3286564615578eea0a1bc883e4b332be8306d9883d14
c85ffe6 Test transaction selection when gbt called without segwit support (Suhas Daftuar)
abe7b3d Don't require segwit in getblocktemplate for segwit signalling or mining (Suhas Daftuar)
Tree-SHA512: 172496b6d7cdf1879de1266748f2b4ed9fd2ba9ff4a1fd964d74d73c674c16d74bf01a3ba42bf25f2d69f348217c0bbf3412ac64821f222efc9de25a287a5240
Segwit's version bit will be signalled for all invocations of CreateNewBlock,
and not specifying segwit only will cause CreateNewBlock to skip transactions
with witness from being selected.
45a5aaf Only call clear on prevector if it isn't trivially destructible and don't loop in clear (Jeremy Rubin)
aaa02e7 Add prevector destructor benchmark (Jeremy Rubin)
Tree-SHA512: 52bc8163b65b71310252f2d578349d0ddc364a6c23795c5e06e101f5449f04c96cbdca41c0cffb1974b984b8e33006471137d92b8dd4a81a98e922610a94132a
4d51e9b Assert ConnectBlock block and pIndex are the same block (NicolasDorier)
972714c pow: GetNextWorkRequired never called with NULL pindexLast (Daniel Cousens)
cc44c8f ContextualCheckBlockHeader should never have pindexPrev to NULL (NicolasDorier)
Tree-SHA512: 7cc568bf9417267c335f21ec3d1505b26e56e5b3d5f4d3dbb555279489800aaa65a3bcd7bc376e274dd102912aec16ddbb18de2e2060b2667b41eb979cd9321e
b651270 util: Throw tinyformat::format_error on formatting error (Wladimir J. van der Laan)
3b092bd util: Properly handle errors during log message formatting (Wladimir J. van der Laan)
Tree-SHA512: 85e3b7afec2255fc88034187f1abd6060e9421de17ed4e3d918416f393429a99cc2c974b362099aaaff6970549df47664bea4c857c4e46acc0789663201dc541
dcf2112 Add safe flag to listunspent result (NicolasDorier)
af61d9f Add COutput::fSafe member for safe handling of unconfirmed outputs (Russell Yanofsky)
Tree-SHA512: 311edb6fa8075b3ede5b24cb8c6e5d133ccd8ac9ecafea07b604ffa812ee4f071337e31695e662d8573590a0460af20aaaeb39d49c9ea87924449ea50bdfb0b3
819b513 Add missing braces in semaphore posts in net (Matt Corallo)
e007b24 Fix shutdown hang with >= 8 -addnodes set (Matt Corallo)
Tree-SHA512: f2d7562bd5d333cd0e80562eb3b1fe329fc10ee713996e053d2ed669db6d9eb39550e0a6c6ab768cd070bfe92a5ea85e0f752470206706de196bd4a689b9bc07
Instead of having an exception propagate into the program when an
error happens while formatting a log message, just print a message to
the log.
Addresses #9423.
We previously would block waiting for a CSemaphoreGrant in
ThreadOpenAddedConnections, when we did not need to. This would
block as the posts in CConnman shutdown were both to the wrong
semaphore and in the wrong location.
RPC_INVALID_REQUEST and RPC_METHOD_NOT_FOUND are mapped internally to
HTTP error codes and should not be used for application-layer errors.
This commit adds commenting around those definitions to warn not to use
them for application errors.
On msvc14, int literal '-2147483648' is invalid, because '2147483648' is unsigned type and cant't apply minus operator to unsigned type.
To define the int literal correctly, use '-2147483647 - 1' formula that is also used to define INT_MIN in limits.h.
The fundrawtransaction() RPC was returning misleading or incorrect error
codes (for example RPC_INTERNAL_ERROR when funding the transaction
failed). This commit fixes those error codes:
- RPC_INTERNAL_ERROR should not be returned for application-level
errors, only for genuine internal errors such as corrupted data.
That error code has been replaced with RPC_WALLET_ERROR.
This commit also updates the test cases to explicitly test the error code.
The setban() RPC was returning misleading or incorrect error
codes (for example RPC_CLIENT_NODE_ALREADY_ADDED when an invalid IP
address was entered). This commit fixes those error codes:
- RPC_CLIENT_INVALID_IP_OR_SUBNET should be returned if the client
enters an invalid IP address or subnet.
This commit also updates the test cases to explicitly test the error code.
This commit also adds a testcase for trying to setban on an invalid subnet.
The removeprunedfunds() RPC was returning misleading or incorrect error
codes (for example RPC_INTERNAL_ERROR when the transaction was
not found in the wallet). This commit fixes those error codes:
- RPC_INTERNAL_ERROR should not be returned for application-level
errors, only for genuine internal errors such as corrupted data.
This error code has been replaced with RPC_WALLET_ERROR.
This commit also updates the test cases to explicitly test the error code.
RPCs in blockchain.cpp were returning misleading or incorrect error
codes (for example getblock() returning RPC_INTERNAL_ERROR when the
block had been pruned). This commit fixes those error codes:
- RPC_INTERNAL_ERROR should not be returned for application-level
errors, only for genuine internal errors such as corrupted data.
- RPC_METHOD_NOT_FOUND should not be returned in response to a
JSON request for an existing method.
Those error codes have been replaced with RPC_MISC_ERROR or
RPC_INVALID_PARAMETER as appropriate.
The bumpfee() RPC was returning misleading or incorrect error codes
(for example RPC_INVALID_ADDRESS_OR_KEY when the transaction was not
BIP125 replacable). This commit fixes those error codes:
- RPC_INVALID_ADDRESS_OR_KEY if an invalid address was provided:
- Invalid change address given
- RPC_INVALID_PARAMETER if a single (non-address/key) parameter is incorrect
- confTarget and totalFee options should not both be set.
- Invalid confTarget
- Insufficient totalFee (cannot be less than required fee)
- RPC_WALLET_ERROR for any other error
- Transaction has descendants in the wallet
- Transaction has descendants in the mempool
- Transaction has been mined, or is conflicted with a mined transaction
- Transaction is not BIP 125 replaceable
- Transaction has already been bumped
- Transaction contains inputs that don't belong to the wallet
- Transaction has multiple change outputs
- Transaction does not have a change output
- Fee is higher than maxTxFee
- New fee rate is less than the minimum fee rate
- Change output is too small.
This commit also updates the test cases to explicitly test the error code.
On msvc14, the compiler error C4146 (unary minus operator applied to unsigned type, result still unsigned) had been occured.
Use '0 - x' styled formula instead of '-x' so as to fix the error.
db07f91 Assert that what might look like a possible division by zero is actually unreachable (practicalswift)
Tree-SHA512: f1652eb37196a5b72f356503a1fbb44fb98aa8a94954ad1765f86d81ebf41a2337d4eb58c4f19937fda3752f5d2d642756e44afdbd438015b87ac20801246bff
`u_int` is not available on some platforms (not sure what standard it's
supposed to be part of), we don't use it anywhere else, and it doesn't
hurt to simply write `unsigned int` out here.
Define MSG_DONTWAIT and MSG_NO_SIGNAL in the implementation files that
use them (`net.cpp` and `netbase.cpp`), instead of compat.h which is
included all over the place.
This avoids putting them in the global namespace, as defining them as 0
is a hack that works for our specific usage, but it is not a general
solution.
Also makes sure they are defined only once so the `!defined(MSG_x)` guard can go.
Instead of the WIN32-specific workaround, detect lack of `MSG_DONTWAIT`
in the build system. This allows other platforms without `MSG_DONTWAIT`
to work too.
Setting minrelaytxfee to 0 will allow all transactions regardless of fee to enter your mempool until it reaches its size limit. However now that mempool limiting is governed by a separate incrementalrelay fee, it is an unnecessary restriction to prevent a minrelaytxfee of 0.
This a breaking API change to the prioritisetransaction RPC call which previously required exactly three arguments and now requires exactly two (hash and feeDelta). The function prioritiseTransaction is also updated.
"startingpriority" and "currentpriority" are no longer returned in the JSON information about a mempool entry. This affects getmempoolancestors, getmempooldescendants, getmempooolentry, and getrawmempool.
Remove -limitfreerelay and always enforce minRelayTxFee in the mempool (except from disconnected blocks)
Remove -relaypriority, the option was only used for the ability to allow free transactions to be relayed regardless of their priority. Both notions no longer apply.
Previously if an existing watch only key was reimported with a new timestamp,
the new timestamp would not be saved in the key metadata, and would not be used
to update the wallet nTimeFirstKey value (which could cause rescanning to start
at the wrong point and miss transactions).
Issue was pointed out by Jonas Schnelli <dev@jonasschnelli.ch> in
https://github.com/bitcoin/bitcoin/pull/9108#issuecomment-279715550
ad1ae7a Check and enable -Wshadow by default. (Pavel Janík)
9de90bb Do not shadow variables (gcc set) (Pavel Janík)
Tree-SHA512: 9517feb423dc8ddd63896016b25324673bfbe0bffa97f22996f59d7a3fcbdc2ebf2e43ac02bc067546f54e293e9b2f2514be145f867321e9031f895c063d9fb8
d678771 Wallet: Sanitise -wallet parameter (Luke Dashjr)
9756be3 Wallet/RPC: Use filename rather than CWallet pointer, for lockwallet RPCRunLater job name (Luke Dashjr)
86be48a More tightly couple EnsureWalletIsAvailable with GetWalletForJSONRPCRequest where appropriate (Luke Dashjr)
a435632 Move wallet RPC declarations to rpcwallet.h (Luke Dashjr)
ad15734 RPC: Pass on JSONRPCRequest metadata (URI/user/etc) for "help" method (Luke Dashjr)
bf8a04a Reformat touched lines with C++11 (Luke Dashjr)
2e518e3 Move nWalletUnlockTime to CWallet::nRelockTime, and name timed task unique per CWallet (Luke Dashjr)
d77ad6d RPC: Do all wallet access through new GetWalletForJSONRPCRequest (Luke Dashjr)
eca550f RPC/Wallet: Pass CWallet as pointer to helper functions (Luke Dashjr)
Tree-SHA512: bfd592da841693390e16f83b451503eb5cedb71208089aa32b3fc45e973555584a3ed7696dd239f6409324464d565dacf0f3d0e36e8e13ae6a7843848465f960
6485466 test: Report InitBlockIndex result (Wladimir J. van der Laan)
Tree-SHA512: 8e1408aa8d56ec1873190f886af24aa68b0555ec4996b2b8a5a39a51ded58c8fba5843c07881ed33ab6dcb00e62c2322bcf2a6fb8f1083f77e0d93e7295ab938
7ed143c Add test for CWalletTx::GetImmatureCredit() returning stale values. (Russell Yanofsky)
Tree-SHA512: c95088ed6dfc5a0774ddaa2fe14ac0a9ebd830922a4d77100ec3d51fdeb6df40ad97de4f2ea970ed0f4122dcc0022ee1d43ab3c7188becd7f90c1c6af0ed39b7
If InitBlockIndex fails, then it will segfault later. Same for the later
ActivateBestChain. BOOST_REQUIRE the result, so that an error will be
reported and the test case aborted.
7e6dcd9 random: Add fallback if getrandom syscall not available (Wladimir J. van der Laan)
7cad849 sanity: Move OS random to sanity check function (Wladimir J. van der Laan)
aa09ccb squashme: comment that NUM_OS_RANDOM_BYTES should not be changed lightly (Wladimir J. van der Laan)
224e6eb util: Specific GetOSRandom for Linux/FreeBSD/OpenBSD (Wladimir J. van der Laan)
Tree-SHA512: 9fd408b1316c69de86674f342339b2f89192fd317c8c036b5df4320f828fa263c7966146bfc1904c51137ee4a26e4cb0f560b2cd05e18cde4d808b9b92ad15c4
Change ScanForWalletTransactions return value so it is possible to distinguish
scans that skip reading every block (due to the nTimeFirstKey optimization)
from scans that fail while reading the chainActive.Tip() block. Return value is
now non-null in the non-failing case.
This change doesn't affect any user-visible behavior, it is only an internal
API improvement. The only code currently using the ScanForWalletTransactions
return value is in importmulti, and importmulti always calls
ScanForWalletTransactions with a pindex pointing to the first block in
chainActive whose block time is >= (nLowestTimestamp - 7200), while
ScanForWalletTransactions would only return null without reading blocks when
pindex and every block after it had a block time < (nTimeFirstKey - 7200).
These conditions could never happen at the same time because nTimeFirstKey <=
nLowestTimestamp.
I'm planning to make a more substantial API improvement in the future (making
ScanForWalletTransactions private and exposing a higher level rescan method to
RPC code), but Matt Corallo <git@bluematt.me> pointed out this odd behavior
introduced by e2e2f4c "Return errors from importmulti if complete rescans are
not successful" yesterday, so I'm following up now to get rid of badness
introduced by that merge.
Prior to this commit pindexRescan was initialized to a chainActive.Tip().
However, the value of pindexRescan set at time of initialization was never
read before pindexRescan was being set to either chainActive.Genesis()
(case 1), FindForkInGlobalIndex(chainActive, locator) (case 2) or
chainActive.Genesis() (case 3). Thus, the initialization was redundant.
This commit a.) removes the redundant initialization and b.) simplifies
this logic so that pindexRescan is initialized to chainActive.Genesis()
(case 1 and 3), and set to FindForkInGlobalIndex(chainActive, locator)
(case 2) as needed.
In the case that the branch ...
if (itInFlight != mapBlocksInFlight.end() && itInFlight->second.first == nodeid) {
... is taken, there was prior to this commit an implicit assumption that
MarkBlockAsInFlight(...) was being called with its fifth and optional
argument (pit) being present (and non-NULL).
19cafc6 test: Replace remaining sprintf with snprintf (Wladimir J. van der Laan)
0a17714 uint256: replace sprintf with HexStr and reverse-iterator (Wladimir J. van der Laan)
Tree-SHA512: 2ba1dd4d25e1cbfff4d67b2f483448aa7c34ab5c799cddd48ba5826e5fa6df425abe35e244aaf4c52db9fccfb4d2a25a14bb4597bf9d1fce95991f270da6bb26
83ac719 Change bitcoin address in RPC helpaddress to an invalid address, so people don't accidentally send coins there (like I did). (Marijn Stollenga)
Tree-SHA512: ca1163466a149d567b97efbfcfa8fdfe2d474245b4dd5a1a92555b4e87f8e99df5fee4cd79ef1ce6a98db2337846af78f37c2e6b31d02008b11fa0e151ce6590
This removes the option from the wallet to not pay a fee on "small"
transactions which spend "old" inputs.
This code is no longer worth keeping around, as almost all miners
prefer not to include transactions which pay no fee at all.
Use of `sprintf` is seen as a red flag as many of its uses are insecure.
OpenBSD warns about it while compiling, and some modern platforms, e.g.
[cloudlibc from cloudabi](https://github.com/NuxiNL/cloudlibc) don't
even provide it anymore.
Although our uses of these functions are secure, it can't hurt to
replace them anyway. There are only 3 occurences left, all in the
tests.
- Change initializeResult(int) to initializeResult(bool) to avoid
implicit type conversion.
- Use EXIT_FAILURE and EXIT_SUCCESS instead of magic numbers.
- Remove the argument from shutdownResult(int); it was called with a
constant argument.
Warnings introduced by commit e2e2f4c "Return errors from importmulti if
complete rescans are not successful" and reported by Pavel Janík
<Pavel@Janik.cz> in https://github.com/bitcoin/bitcoin/pull/9773 and
https://github.com/bitcoin/bitcoin/pull/9827
wallet/test/wallet_tests.cpp: In member function ‘void wallet_tests::rescan::test_method()’:
wallet/test/wallet_tests.cpp:377:17: warning: declaration of ‘wallet’ shadows a global declaration [-Wshadow]
CWallet wallet;
An effort to reduce the size of AppInitMain().
The removed code upgrades the location of the block files when
upgrading to 0.8. 0.8 seems to be the oldest version still in use.
If the code was compiled with newer (>=3.17) kernel headers but executed
on a system without the system call, every use of random would crash the
program. Add a fallback for that case.
Move the OS random test to a sanity check function that is called every
time bitcoind is initialized.
Keep `src/test/random_tests.cpp` for the case that later random tests
are added, and keep a rudimentary test that just calls the sanity check.
These are available in sandboxes without access to files or
devices. Also [they are safer and more straightforward](https://en.wikipedia.org/wiki/Entropy-supplying_system_calls)
to use than `/dev/urandom` as reading from a file has quite a few edge
cases:
- Linux: `getrandom(buf, buflen, 0)`. [getrandom(2)](http://man7.org/linux/man-pages/man2/getrandom.2.html)
was introduced in version 3.17 of the Linux kernel.
- OpenBSD: `getentropy(buf, buflen)`. The [getentropy(2)](http://man.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man2/getentropy.2)
function appeared in OpenBSD 5.6.
- FreeBSD and NetBSD: `sysctl(KERN_ARND)`. Not sure when this was added
but it has existed for quite a while.
Alternatives:
- Linux has sysctl `CTL_KERN` / `KERN_RANDOM` / `RANDOM_UUID`
which gives 16 bytes of randomness. This may be available
on older kernels, however [sysctl is deprecated on Linux](https://lwn.net/Articles/605392/)
and even removed in some distros so we shouldn't use it.
Add tests for `GetOSRand()`:
- Test that no error happens (otherwise `RandFailure()` which aborts)
- Test that all 32 bytes are overwritten (initialize with zeros, try multiple times)
Discussion:
- When to use these? Currently they are always used when available.
Another option would be to use them only when `/dev/urandom` is not
available. But this would mean these code paths receive less testing,
and I'm not sure there is any reason to prefer `/dev/urandom`.
Closes: #9676
3ddfe29 netbase: Do not print an error on connection timeouts through proxy (Wladimir J. van der Laan)
13f6085 netbase: Make InterruptibleRecv return an error code instead of bool (Wladimir J. van der Laan)
f6d18f5 Qt/Intro: Explain a bit more what will happen first time (Luke Dashjr)
50c5657 Qt/Intro: Storage shouldn't grow significantly with pruning enabled (Luke Dashjr)
9adb694 Qt/Intro: Move sizeWarningLabel text into C++ code (Luke Dashjr)
* Extends -dns parameter (via fNameLookup) to control these two new
parameters in addition to -addnode, -connect, and -seednode
* Moves fNameLookup assignment earlier as needed
* Changes -proxy and -onion to use Lookup() instead of LookupNumeric()
Remove "nLowestTimestamp <= chainActive.Tip()->GetBlockTimeMax()" check from
importmulti, which is always true because nLowestTimestamp is set to the
minimum of the most recent block time and all the imported key timestamps,
which is necessarily lower than the maximum block time.
e662af3 Use 2 hour grace period for key timestamps in importmulti rescans (Russell Yanofsky)
38d3e9e [qa] Extend import-rescan.py to test imports on pruned nodes. (Russell Yanofsky)
c28583d [qa] Extend import-rescan.py to test specific key timestamps (Russell Yanofsky)
8be0866 [qa] Simplify import-rescan.py (Russell Yanofsky)
- If the -maxsigcachesize parameter is set to zero, setup a minimum sized
sigcache (2 elements) rather than segfaulting.
- Handle maxsigcachesize being negative
- Handle maxsigcachesize being too large
A new AssertLockHeld(cs_wallet) call was added in commit a58370e
"Dedup nTimeFirstKey update logic" (part of PR #9108).
The lock held assertion will fail when loading prexisting wallets files from
before the #9108 merge that have watch-only keys.
Fixes a bug in AcceptBlock() in invoking CheckBlock() with incorrect
arguments, and restores a call to CheckBlock() from ProcessNewBlock()
as belt-and-suspenders.
Updates the (overspecified) tests to match behavior.
Because it is used inconsistently at least version 5.4.0 of g++ to
complains about methods that don't use override. There is two ways to go
about this: remove override from the methods having it, or add it to the
methods missing it. I chose the second.
d943491 qa: add a test to detect leaky p2p messages (Cory Fields)
8650bbb qa: Expose on-connection to mininode listeners (Matt Corallo)
5b5e4f8 qa: mininode learns when a socket connects, not its first action (Matt Corallo)
cbfc5a6 net: require a verack before responding to anything else (Cory Fields)
8502e7a net: parse reject earlier (Cory Fields)
c45b9fb net: correctly ban before the handshake is complete (Cory Fields)
66f861a Add a test for P2P inactivity timeouts (Matt Corallo)
b436f92 qa: Expose on-connection to mininode listeners (Matt Corallo)
8aaba7a qa: mininode learns when a socket connects, not its first action (Matt Corallo)
2cbd119 Disconnect peers which we do not receive VERACKs from within 60 sec (Matt Corallo)
266a811 Use MTP for importmulti "now" timestamps (Russell Yanofsky)
3cf9917 Add test to check new importmulti "now" value (Russell Yanofsky)
442887f Require timestamps for importmulti keys (Russell Yanofsky)
7179e7c qt: Periodic translations update (Wladimir J. van der Laan)
5e903a5 devtools: Handle Qt formatting characters edge-case in update-translations.py (Wladimir J. van der Laan)
7a8c251901 made this logic hard to follow. After that change, messages would
not be sent to a peer via SendMessages() before the handshake was complete, but
messages could still be sent as a response to an incoming message.
For example, if a peer had not yet sent a verack, we wouldn't notify it about
new blocks, but we would respond to a PING with a PONG.
This change makes the behavior straightforward: until we've received a verack,
never send any message other than version/verack/reject.
The behavior until a VERACK is received has always been undefined, this change
just tightens our policy.
This also makes testing much easier, because we can now connect but not send
version/verack, and anything sent to us is an error.
Prior to this change, all messages were ignored until a VERSION message was
received, as well as possibly incurring a ban score.
Since REJECT messages can be sent at any time (including as a response to a bad
VERSION message), make sure to always parse them.
Moving this parsing up keeps it from being caught in the
if (pfrom->nVersion == 0) check below.
7a8c251901 made a change to avoid getting into SendMessages() until the
version handshake (VERSION + VERACK) is complete. That was done to avoid
leaking out messages to nodes who could connect, but never bothered sending
us their version/verack.
Unfortunately, the ban tally and possible disconnect are done as part of
SendMessages(). So after 7a8c251901, if a peer managed to do something
bannable before completing the handshake (say send 100 non-version messages
before their version), they wouldn't actually end up getting
disconnected/banned. That's fixed here by checking the banscore as part of
ProcessMessages() in addition to SendMessages().
a60677e Pre-0.14.0 hardcoded seeds update (Wladimir J. van der Laan)
bfa9393 contrib/seeds: Update PATTERN_AGENT (Wladimir J. van der Laan)
4dfac2c Update seeds tooling to Python 3 (Wladimir J. van der Laan)
When importing a watch-only address over importmulti with a specific timestamp,
the wallet's nTimeFirstKey is currently set to 1. After this change, the
provided timestamp will be used and stored as metadata associated with
watch-only key. This can improve wallet performance because it can avoid the
need to scan the entire blockchain for watch only addresses when timestamps are
provided.
Also adds timestamp to validateaddress return value (needed for tests).
Fixes#9034.
Additionally, accept a "now" timestamp, to allow avoiding rescans for keys
which are known never to have been used.
Note that the behavior when "now" is specified is slightly different than the
previous behavior when no timestamp was specified at all. Previously, when no
timestamp was specified, it would avoid rescanning during the importmulti call,
but set the key's nCreateTime value to 1, which would not prevent future block
reads in later ScanForWalletTransactions calls. With this change, passing a
"now" timestamp will set the key's nCreateTime to the current block time
instead of 1.
Fixes#9491
These are (afaik) all long-standing races or concurrent accesses. Going
forward, we can clean these up so that they're not all individual atomic
accesses.
- Reintroduce cs_vRecv to guard receive-specific vars
- Lock vRecv/vSend for CNodeStats
- Make some vars atomic.
- Only set the connection time in CNode's constructor so that it doesn't change
Minimum boost version was bumped to 1.47.0 in #8920, which
means the configure step won't even pass with older boost.
This version has boost filesystem v3, which means the
(crappy) fallbacks for older versions can go.
If a timeout happens while reading the proxy response, this effectively
means we timed out while connecting to the remote node. This is very
common for Tor, so do not print an error message.
a9baa6d Bugfix: Qt/Intro: Pruned nodes never require *more* space (Luke Dashjr)
93ffba7 Bugfix: Qt/Intro: Chain state needs to be stored even with the full blockchain (Luke Dashjr)
c8cee26 Qt/Intro: Update block chain size (Luke Dashjr)
618ee92 Further-enforce lockordering by enforcing directly after TRY_LOCKs (Matt Corallo)
2a962d4 Fixup style a bit by moving { to the same line as if statements (Matt Corallo)
8465631 Always enforce lock strict lock ordering (try or not) (Matt Corallo)
fd13eca Lock cs_vSend and cs_inventory in a consistent order even in TRY (Matt Corallo)
The initialization order of global data structures in different
implementation units is undefined. Making use of this is essentially
gambling on what the linker does, the so-called [Static initialization
order fiasco](https://isocpp.org/wiki/faq/ctors#static-init-order).
In this case it apparently worked on Linux but failed on OpenBSD and
FreeBSD.
To create it on first use, make the registration structure local to
a function.
Fixes#8910.
6dbfe08 [qa] test signrawtransaction merge with missing inputs (Matt Corallo)
ec4f7e4 [qa] Add second input to signrawtransaction test case (Matt Corallo)
691710a [qa] Test that decoderawtransaction throws with extra data appended (Matt Corallo)
922bea9 Better handle invalid parameters to signrawtransaction (Matt Corallo)
7ea0ad5 Fail in DecodeHexTx if there is extra data at the end (Matt Corallo)
0729102 Net: pass interruptMsgProc as const where possible (Jorge Timón)
fc7f2ff Net: Make CNetMsgMaker more const (Jorge Timón)
d45955f Net: CConnman: Make some methods const (Jorge Timón)
Easier to understand what the button does (it resets the graph view).
'Clear' might mean that the graph is emptied and stops updating, whereas
its easier to see that you're just starting fresh with 'Reset'.
08bb6f4 net: log an error rather than asserting if send version is misused (Cory Fields)
7a8c251 net: Disallow sending messages until the version handshake is complete (Cory Fields)
12752af net: don't run callbacks on nodes that haven't completed the version handshake (Cory Fields)
2046617 net: deserialize the entire version message locally (Cory Fields)
80ff034 Dont deserialize nVersion into CNode, should fix#9212 (Matt Corallo)
Preserve comment, order form, and account strings from the original wallet
transaction. Also set fTimeReceivedIsTxTime and fFromMe fields for consistency
with CWallet::CreateTransaction. The latter two fields don't influence current
wallet behavior, but do record that the transaction originated in the wallet
instead of coming from the network or sendrawtransaction.
This silently skips trying to merge signatures from inputs which
do not exist from transactions provided to signrawtransaction,
instead of hitting an assert.
Since ForEach* are can be used to send messages to all nodes, the caller may
end up sending a message before the version handshake is complete. To limit
this, filter out these nodes. While we're at it, may as well filter out
disconnected nodes as well.
Delete unused methods rather than updating them.
This avoids having some vars set if the version negotiation fails.
Also copy it all into CNode at the same site. nVersion and
fSuccessfullyConnected are set last, as they are the gates for the other vars.
Make them atomic for that reason.
Once the CNode has been added to vNodes, it is possible that it is
disconnected+deleted in the socket handler thread. However, after
that we now call InitializeNode, which accesses the pnode.
helgrind managed to tickle this case (somehow), but I suspect it
requires in immensely braindead scheduler.
More accurate than simply adding one byte per input, and properly handles the
case where the original transaction happened to have very small signatures
2366180 Do not add to vNodes until fOneShot/fFeeler/fAddNode have been set (Matt Corallo)
3c37dc4 Ensure cs_vNodes is held when using the return value from FindNode (Matt Corallo)
5be0190 Delete some unused (and broken) functions in CConnman (Matt Corallo)
4b189c1 Change bumpfee result value from 'oldfee' to 'origfee'. (Alex Morcos)
0c0c63f Introduce WALLET_INCREMENTAL_RELAY_FEE (Alex Morcos)
e8021ec Use CWallet::GetMinimumFee in bumpfee (Alex Morcos)
ae9719a Refactor GetMinimumFee to give option of providing targetFee (Alex Morcos)
fe8e8ef [rpc] Add incremental relay fee to getnetworkinfo (Alex Morcos)
6b331e6 Fix to have miner test aware of new separate block min tx fee (Alex Morcos)
de6400d Fix missing use of dustRelayFee (Alex Morcos)
5b15870 Use incrementalRelayFee for BIP 125 replacement (Alex Morcos)
The result value indicates the actual fee on the transaction that was replaced. But there is an error message which uses the description 'oldfee' to refer to the original fee rate applied to the new transaction's estimated max size. It was confusing that two different uses of 'oldfee' had two different numeric values.
Have wallet's default bump value be higher than the default incrementalRelayFee to future proof against changes to incremental relay fee. Only applies when not setting the fee rate directly.
Use the wallet's fee calculation logic to properly clamp fee against minimums and maximums when calculating the fee for a bumpfee transaction. Unless totalFee is explictly given, in which case, manually check against min, but do nothing to adjust given fee.
In all cases do a final check against maxTxFee (after adding any incremental amount).
Before this commit, the checkbox would always start off unchecked. After this
commit it will respect the -walletrbf setting (which is currently false by
default).
The use of mocktime in test logic means that comparisons between
GetTime() and GetTimeMicros()/1000000 are unreliable since the former
can use mocktime values while the latter always gets the system clock;
this changes the networking code's inactivity checks to consistently
use the system clock for inactivity comparisons.
Also remove some hacks from setmocktime() that are no longer needed,
now that we're using the system clock for nLastSend and nLastRecv.
094e4b3 Better document usage of SyncTransaction (Alex Morcos)
4afbde6 Introduce MemPoolConflictRemovalTracker (Alex Morcos)
ff25c32 mempool: add notification for added/removed entries (Wladimir J. van der Laan)
Analogue to ConnectTrace that tracks transactions that have been removed from the mempool due to conflicts and then passes them through SyncTransaction at the end of its scope.
Add notification signals to make it possible to subscribe to mempool
changes:
- NotifyEntryAdded(CTransactionRef)>
- NotifyEntryRemoved(CTransactionRef, MemPoolRemovalReason)>
Also add a mempool removal reason enumeration, which is passed to the
removed notification based on why the transaction was removed from
the mempool.
7ba0a00 Testing: listsinceblock should not use orphan block height. (Karl-Johan Alm)
ee5c1ce Bug-fix: listsinceblock: use closest common ancestor when a block hash was provided for a chain that was not the main chain. (Karl-Johan Alm)
Prior to this commit the err variable was not guaranteed to be set before
the check ...
BOOST_CHECK_MESSAGE(err != SCRIPT_ERR_OK, ScriptErrorString(err));
This adds a comment to the new logic for setting HB peers based
on block validation (and aligns the code below to reflect the comment).
It's not obvious why we're checking mapBlocksInFlight. Add a comment to
explain.
The additional initializer is for the named arguments, which are unused
in the test (and unfilled global fields will be initialized to 0
anyhow), so this is a no-op apart from the warning.
c9f3062 Add fundrawtransactions new reserveChangeKey option to the release notes (Jonas Schnelli)
9eb325d [QA] Add test for fundrawtransactions new reserveChangeKey option (Jonas Schnelli)
9aa4e6a [Wallet] Add an option to keep the change address key, true by default (Jonas Schnelli)
The old Bitcoin alert system has long since been retired.
( See also: https://bitcoin.org/en/alert/2016-11-01-alert-retirement )
This change causes each node to send any old peers that
it connects with a copy of the final alert.
The alert it hardcode cancels all other alerts including
other final alerts.
376b3c2 Make the cs_sendProcessing a LOCK instead of a TRY_LOCK (Matt Corallo)
d7c58ad Split CNode::cs_vSend: message processing and message sending (Matt Corallo)
This command allows a user to increase the fee on a wallet transaction T, creating a "bumper" transaction B.
T must signal that it is BIP-125 replaceable.
T's change output is decremented to pay the additional fee. (B will not add inputs to T.)
T cannot have any descendant transactions.
Once B bumps T, neither T nor B's outputs can be spent until either T or (more likely) B is mined.
Includes code by @jonasschnelli and @ryanofsky
This forces the message handling thread to make another full
iteration of SendMessages prior to going back to sleep, ensuring
we announce the new block to all peers before sleeping.
4b06e41 Add unit test for FindEarliestAtLeast (Suhas Daftuar)
997a98a Replace FindLatestBefore used by importmuti with FindEarliestAtLeast. (Gregory Maxwell)
02ee4eb Make most_recent_compact_block a pointer to a const (Matt Corallo)
73666ad Add comment to describe callers to ActivateBestChain (Matt Corallo)
962f7f0 Call ActivateBestChain without cs_main/with most_recent_block (Matt Corallo)
0df777d Use a temp pindex to avoid a const_cast in ProcessNewBlockHeaders (Matt Corallo)
c1ae4fc Avoid holding cs_most_recent_block while calling ReadBlockFromDisk (Matt Corallo)
9eb67f5 Ensure we meet the BIP 152 old-relay-types response requirements (Matt Corallo)
5749a85 Cache most-recently-connected compact block (Matt Corallo)
9eaec08 Cache most-recently-announced block's shared_ptr (Matt Corallo)
c802092 Relay compact block messages prior to full block connection (Matt Corallo)
6987219 Add a CValidationInterface::NewPoWValidBlock callback (Matt Corallo)
180586f Call AcceptBlock with the block's shared_ptr instead of CBlock& (Matt Corallo)
8baaba6 [qa] Avoid race in preciousblock test. (Matt Corallo)
9a0b2f4 [qa] Make compact blocks test construction using fetch methods (Matt Corallo)
8017547 Make CBlockIndex*es in net_processing const (Matt Corallo)
Technically cs_sendProcessing is entirely useless now because it
is only ever taken on the one MessageHandler thread, but because
there may be multiple of those in the future, it is left in place
cs_vSend is used for two purposes - to lock the datastructures used
to queue messages to place on the wire and to only call
SendMessages once at a time per-node. I believe SendMessages used
to access some of the vSendMsg stuff, but it doesn't anymore, so
these locks do not need to be on the same mutex, and also make
deadlocking much more likely.
e60360e net: remove cs_vRecvMsg (Cory Fields)
991955e net: add a flag to indicate when a node's send buffer is full (Cory Fields)
c6e8a9b net: add a flag to indicate when a node's process queue is full (Cory Fields)
4d712e3 net: add a new message queue for the message processor (Cory Fields)
c5a8b1b net: rework the way that the messagehandler sleeps (Cory Fields)
c72cc88 net: remove useless comments (Cory Fields)
ef7b5ec net: Add a simple function for waking the message handler (Cory Fields)
f5c36d1 net: record bytes written before notifying the message processor (Cory Fields)
60befa3 net: handle message accounting in ReceiveMsgBytes (Cory Fields)
56212e2 net: set message deserialization version when it's actually time to deserialize (Cory Fields)
0e973d9 net: remove redundant max sendbuffer size check (Cory Fields)
6042587 net: wait until the node is destroyed to delete its recv buffer (Cory Fields)
f6315e0 net: only disconnect if fDisconnect has been set (Cory Fields)
5b4a8ac net: make GetReceiveFloodSize public (Cory Fields)
e5bcd9c net: make vRecvMsg a list so that we can use splice() (Cory Fields)
53ad9a1 net: fix typo causing the wrong receive buffer size (Cory Fields)
This disentangles the script validation skipping from checkpoints.
A new option is introduced "assumevalid" which specifies a block whos
ancestors we assume all have valid scriptsigs and so we do not check
them when they are also burried under the best header by two weeks
worth of work.
Unlike checkpoints this has no influence on consensus unless you set
it to a block with an invalid history. Because of this it can be
easily be updated without risk of influencing the network consensus.
This results in a massive IBD speedup.
This approach was independently recommended by Peter Todd and Luke-Jr
since POW based signature skipping (see PR#9180) does not have the
verifiable properties of a specific hash and may create bad incentives.
The downside is that, like checkpoints, the defaults bitrot and older
releases will sync slower. On the plus side users can provide their
own value here, and if they set it to something crazy all that will
happen is more time will be spend validating signatures.
Checkblocks and checklevel are also moved to the hidden debug options:
Especially now that checkblocks has a low default there is little need
to change these settings, and users frequently misunderstand them as
influencing security or IBD speed. By hiding them we offset the
space added by this new option.
vRecvMsg is now only touched by the socket handler thread.
The accounting vars (nRecvBytes/nLastRecv/mapRecvBytesPerMsgCmd) are also
only used by the socket handler thread, with the exception of queries from
rpc/gui. These accesses are not threadsafe, but they never were. This needs to
be addressed separately.
Also, update comment describing data flow
Similar to the recv flag, but this one indicates whether or not the net's send
buffer is full.
The socket handler checks the send queue when a new message is added and pauses
if necessary, and possibly unpauses after each message is drained from its buffer.
Messages are dumped very quickly from the socket handler to the processor, so
it's the depth of the processing queue that's interesting.
The socket handler checks the process queue's size during the brief message
hand-off and pauses if necessary, and the processor possibly unpauses each time
a message is popped off of its queue.
In order to sleep accurately, the message handler needs to know if _any_ node
has more processing that it should do before the entire thread sleeps.
Rather than returning a value that represents whether ProcessMessages
encountered a message that should trigger a disconnnect, interpret the return
value as whether or not that node has more work to do.
Also, use a global fProcessWake value that can be set by other threads,
which takes precedence (for one cycle) over the messagehandler's decision.
Note that the previous behavior was to only process one message per loop
(except in the case of a bad checksum or invalid header). That was changed in
PR #3180.
The only change here in that regard is that the current node now falls to the
back of the processing queue for the bad checksum/invalid header cases.
In spite of the name FindLatestBefore used std::lower_bound to try
to find the earliest block with a nTime greater or equal to the
the requested value. But lower_bound uses bisection and requires
the input to be ordered with respect to the comparison operation.
Block times are not well ordered.
I don't know what lower_bound is permitted to do when the data
is not sufficiently ordered, but it's probably not good.
(I could construct an implementation which would infinite loop...)
To resolve the issue this commit introduces a maximum-so-far to the
block indexes and searches that.
For clarity the function is renamed to reflect what it actually does.
An issue that remains is that there is no grace period in importmulti:
If a address is created at time T and a send is immediately broadcast
and included by a miner with a slow clock there may not yet have been
any block with at least time T.
The normal rescan has a grace period of 7200 seconds, but importmulti
does not.
0c50909 testcases: explicitly specify transaction version 1 (John Newbery)
b7e144b Add test cases to test new bitcoin-tx functionality (jnewbery)
61a1534 Add all transaction output types to bitcoin-tx. (jnewbery)
1814b08 add p2sh and segwit options to bitcoin-tx outscript command (Stanislas Marion)
There is still a call to ActivateBestChain with cs_main if a peer
requests the block prior to it being validated, but this one is
more specifically-gated, so should be less of an issue.
AcceptToMemoryPool has several classes of return false statements.
- return state.Invalid or state.DoS directly itself
- return false and set fMissingInputs (state is valid)
- return false and state is set by failed CheckTransaction
- return false and state is set by failed CheckInputs.
This commit patches the last case where the state variable was reused for additional calls to CheckInputs to identify witness stripping as cause of validation failure. After this commit, it should be the case that if !fMissingInputs, state is always Invalid if AcceptToMemoryPool returns false.
4e7e2e1 Update RPC argument names (John Newbery)
481f289 rpc: Named argument support for bitcoin-cli (Wladimir J. van der Laan)
9adb4e1 rpc: Argument name consistency (Wladimir J. van der Laan)
8d713f7 rpc: Named arguments for rawtransaction calls (Wladimir J. van der Laan)
37a166f rpc: Named arguments for wallet calls (Wladimir J. van der Laan)
78b684f rpc: Named arguments for mining calls (Wladimir J. van der Laan)
b8ebc59 rpc: Named arguments for net calls (Wladimir J. van der Laan)
2ca9dcd test: Add test for RPC named arguments (Wladimir J. van der Laan)
fba1a61 rpc: Named arguments for misc calls (Wladimir J. van der Laan)
286ec08 rpc: Add 'echo' call for testing (Wladimir J. van der Laan)
495eb44 rpc: Named arguments for blockchain calls (Wladimir J. van der Laan)
6f1c76a rpc: Support named arguments (Wladimir J. van der Laan)
5865d41 authproxy: Add support for RPC named arguments (Wladimir J. van der Laan)
5113474 wallet: Use CDataStream.data() (Wladimir J. van der Laan)
e2300ff bench: Use CDataStream.data() (Wladimir J. van der Laan)
adff950 dbwrapper: Use new .data() method of CDataStream (Wladimir J. van der Laan)
a2141e4 streams: Remove special cases for ancient MSVC (Wladimir J. van der Laan)
af4c44c streams: Add data() method to CDataStream (Wladimir J. van der Laan)
20449ef Don't overpay fee if we have selected new coins that result in a smaller transaction. (Alex Morcos)
42f5ce4 Try to reduce change output to make needed fee in CreateTransaction (Alex Morcos)
032ba3f RPC help documentation for addnode peerinfo. (Gregory Maxwell)
90f13e1 Add release notes for addnode changes. (Gregory Maxwell)
50bd12c Break addnode out from the outbound connection limits. (Gregory Maxwell)
On repeated calls to SelectCoins we try to meet the fee necessary for the last transaction, the new fee required might be smaller, so increase our change by the difference if we can.
Once we've picked coins and dummy-signed the transaction to calculate fee, if we don't have sufficient fee, then try to meet the fee by reducing change before resorting to picking new coins.
Previously addnodes were in competition with outbound connections
for access to the eight outbound slots.
One result of this is that frequently a node with several addnode
configured peers would end up connected to none of them, because
while the addnode loop was in its two minute sleep the automatic
connection logic would fill any free slots with random peers.
This is particularly unwelcome to users trying to maintain links
to specific nodes for fast block relay or purposes.
Another result is that a group of nine or more nodes which are
have addnode configured towards each other can become partitioned
from the public network.
This commit introduces a new limit of eight connections just for
addnode peers which is not subject to any of the other connection
limitations (including maxconnections).
The choice of eight is sufficient so that under no condition would
a user find themselves connected to fewer addnoded peers than
previously. It is also low enough that users who are confused
about the significance of more connections and have gotten too
copy-and-paste happy will not consume more than twice the slot
usage of a typical user.
Any additional load on the network resulting from this will likely
be offset by a reduction in users applying even more wasteful
workaround for the prior behavior.
The retry delays are reduced to avoid nodes sitting around without
their added peers up, but are still sufficient to prevent overly
aggressive repeated connections. The reduced delays also make
the system much more responsive to the addnode RPC.
Ban-disconnects are also exempted for peers added via addnode since
the outbound addnode logic ignores bans. Previously it would ban
an addnode then immediately reconnect to it.
A minor change was also made to CSemaphoreGrant so that it is
possible to re-acquire via an object whos grant was moved.
Performing signing in the inner loop has terrible performance
when many passes through are needed to complete the selection.
Signing before the algorithm is complete also gets in the way
of correctly setting the fee (e.g. preventing over-payment when
the fee required goes down on the final selection.)
Use of the dummy might overpay on the signatures by a couple bytes
in uncommon cases where the signatures' DER encoding is smaller
than the dummy: Who cares?
In order to do this, we must call ActivateBestChain prior to
responding getdata requests for blocks which we announced using
compact blocks.
For getheaders responses we dont need code changes, but do note
that we must reset the bestHeaderSent so that the SendMessages call
re-announces the header in question.
While we could do something smarter for getblocks, calling
ActivateBestChain is simple and more obviously correct, instead of
doing something more similar to getheaders.
See-also the BIP clarifications at
https://github.com/bitcoin/bips/pull/486
The meaning is clear from the context, and we're inconsistent here.
Also save typing when using named arguments.
- `bitcoinaddress` -> `address`
- `bitcoinprivkey` -> `privkey`
- `bitcoinpubkey` -> `pubkey`
The [JSON-RPC specification](http://www.jsonrpc.org/specification) allows passing parameters as an Array, for by-position
arguments, or an Object, for by-name arguments.
This implements by-name arguments, but preserves full backwards compatibility. API using by-name arguments are
easier to extend, and easier to use (no need to guess which argument goes where).
Named are mapped to positions by a per-call structure, provided through the RPC command table.
Missing arguments will be replaced by null, except if at the end, then the argument is left out completely.
Currently calls fail (though not crash) on intermediate nulls, but this should be improved on a per-call basis later.
05a55a6 Added EVENT_CFLAGS to test makefile to explicitly include libevent headers. (Karl-Johan Alm)
280a559 Added some simple tests for the RAII-style events. (Karl-Johan Alm)
7f7f102 Switched bitcoin-cli.cpp to use RAII unique pointers with deleters. (Karl-Johan Alm)
e5534d2 Added std::unique_ptr<> wrappers with deleters for libevent modules. (Karl-Johan Alm)
Make a more conservative notion of whether the node is caught up to the rest of the network and only count transactions as fee estimation data points if the node is caught up.
All decisions about whether the transactions are valid data points are made at the time the transaction arrives. Updating on blocks all the time will now cause stale fee estimates to decay quickly when we restart a node.
Fee estimation can just check its own mapMemPoolTxs to determine the same information. Note that now fee estimation for block processing must happen before those transactions are removed, but this shoudl be a speedup.
This was an oversight, where blocks and mempool tracking were ignored during IBD, but transactions that arrived during IBD but were included in blocks after IBD were not ignored.
Once priority estimation was removed, not all transactions in the mempool are tracked in the fee estimation mempool tracking. So there is no error if a transaction is not found for removal.
We were marking coins FRESH before being sure they were not overwriting dirty undo data. This condition was never reached in existing code because undo data was always flushed before UpdateCoins was called with new transactions, but could have been exposed in an otherwise safe refactor.
Clarify in the comments the assumptions made in ModifyNewCoins.
Add ability to undo transactions to UpdateCoins unit test.
Thanks to Russ Yanofsky for suggestion on how to make logic clearer and fixing up the ccoins_modify_new test cases.
Surprisingly this hasn't been causing me any issues while testing, probably
because it requires lots of large blocks to be flying around.
Send/Recv corks need tests!
f8d43b8 Avoid rollingMinimumFeeRate never being able to decay below half (Alex Morcos)
eab8e1b fix a bug if the min fee is 0 for FeeFilterRounder (Alex Morcos)
- Drop the interruption point directly after the pnode allocation. This would
be leaky if hit.
- Rearrange thread creation so that the socket handler comes first
5394b39 Wallet: Split main logic from InitLoadWallet into CreateWalletFromFile (Luke Dashjr)
fb0c934 Wallet: Let the interval-flushing thread figure out the filename (Luke Dashjr)
8562792 GUI/RPCConsole: Include importmulti in history sensitive-command filter (Luke Dashjr)
ff77faf Qt/RPCConsole: Use RPCParseCommandLine to perform command filtering (Luke Dashjr)
a79598d Qt/Test: Make sure filtering sensitive data works correctly in nested commands (Luke Dashjr)
629cd42 Qt/RPCConsole: Teach RPCParseCommandLine how to filter out arguments to sensitive commands (Luke Dashjr)
e2d9213 Qt/RPCConsole: Make it possible to parse a command without executing it (Luke Dashjr)
1755c04 Qt/RPCConsole: Truncate filtered commands to just the command name, rather than skip it entirely in history (Luke Dashjr)
d80a006 Qt/RPCConsole: Add signmessagewithprivkey to list of commands filtered from history (Luke Dashjr)
afde12f Qt/RPCConsole: Refactor command_may_contain_sensitive_data function out of RPCConsole::on_lineEdit_returnPressed (Luke Dashjr)
de8980d Bugfix: Do not add sensitive information to history for real (Luke Dashjr)
9044908 Qt/RPCConsole: Don't store commands with potentially sensitive information in the history (Jonas Schnelli)
fc95daa Qt/RPCConsole: Save current command entry when browsing history (Jonas Schnelli)
This commit add testcases to test the following functions in bitcoin-tx:
- add a pay to non-standard script output
- add a P2SH output
- add a P2WSH output
- add a P2WSH wrapped in a P2SH output
- add a pay to pub key output
- add a P2WPKH output
- add a P2WPKH wrapped in a P2SH output
- add a bare multisig output
- add a multisig in P2SH output
- add a multisig in a P2WSH output
- add a multisig in a P2WSH wrapped in as P2SH output
This commit enhances bitcoin-tx so all remaining standard TXO types can be created:
- Pay to Pub Key
- Multi-sig
- bare multi-sig
- multi-sig in Pay To Script Hash
- multi-sig in Pay to Witness Script Hash
- multi-sig in Pay to Witness Script Hash, wrapped in P2SH
- Pay to Witness Pub Key Hash
- Pay to Witness Pub Key Hash, wrapped in P2SH
- Pay to Witness Script Hash
- Pay to Witness Script Hash, wrapped in P2SH
If the mempool is not completely full, treat the difference between
the maximum size and the actual usage as available for the coin cache.
This also changes the early flush trigger from (usage > 0.9 * space)
to (usage > 0.9 * space && usage > space - 100MB). This means we're not
permanently leaving 10% of the space unused when the space is large.
cee1612 reduce number of lookups in TransactionWithinChainLimit (Gregory Sanders)
af9bedb Test for fix of txn chaining in wallet (Gregory Sanders)
5882c09 CreateTransaction: Don't return success with too-many-ancestor txn (Gregory Sanders)
0b2294a SelectCoinsMinConf: Prefer coins with fewer ancestors (Gregory Sanders)
749be01 Move GetWarnings() into its own file. (Gregory Maxwell)
e3ba0ef Eliminate data races for strMiscWarning and fLargeWork*Found. (Gregory Maxwell)
c63198f Make QT runawayException call GetWarnings instead of directly access strMiscWarning. (Gregory Maxwell)
813ede9 [qa] Update compactblocks test for multi-peer reconstruction (Suhas Daftuar)
7017298 Allow compactblock reconstruction when block is in flight (Suhas Daftuar)
Defers to pre-defined version if found (e.g. protobuf). For protobuf case, the definitions are identical and thus include order should not affect results.
c5c92c4 Update python tests for default tx version=2 (BtcDrak)
dab207e Preserve tx version=1 for certain tests (BtcDrak)
c5d746a tiny test fix for mempool_tests (Alex Morcos)
1f0ca1a Bump default transaction version to 2 (BtcDrak)
67dac4e Add unit tests for the CuckooCache (Jeremy Rubin)
c9e69fb Add CuckooCache implementation and replace the sigcache map_type with it (Jeremy Rubin)
SQUASHME: Change cuckoocache to only work for powers of two, to avoid mod operator
SQUASHME: Update Documentation and simplify logarithm logic
SQUASHME: OSX Build Errors
SQUASHME: minor Feedback from sipa + bluematt
SQUASHME: DOCONLY: Clarify a few comments.
This change removes a mapValue.erase("version") statement which deletes a
mapValue entry that never existed. The statement was mistakenly added in commit
865c3a2383 in 2010 and is harmless but confusing.
8225239 Merge #433: Make the libcrypto detection fail the newer API.
12de863 Make the libcrypto detection fail the newer API.
2928420 Merge #427: Remove Schnorr from travis as well
8eecc4a Remove Schnorr from travis as well
a8abae7 Merge #310: Add exhaustive test for group functions on a low-order subgroup
b4ceedf Add exhaustive test for verification
83836a9 Add exhaustive tests for group arithmetic, signing, and ecmult on a small group
20b8877 Add exhaustive test for group functions on a low-order subgroup
80773a6 Merge #425: Remove Schnorr experiment
e06e878 Remove Schnorr experiment
04c8ef3 Merge #407: Modify parameter order of internal functions to match API parameter order
6e06696 Merge #411: Remove guarantees about memcmp-ability
40c8d7e Merge #421: Update scalar_4x64_impl.h
a922365 Merge #422: Restructure nonce clearing
3769783 Restructure nonce clearing
0f9e69d Restructure nonce clearing
9d67afa Update scalar_4x64_impl.h
7d15cd7 Merge #413: fix auto-enabled static precompuatation
00c5d2e fix auto-enabled static precompuatation
91219a1 Remove guarantees about memcmp-ability
353c1bf Fix secp256k1_ge_set_table_gej_var parameter order
541b783 Fix secp256k1_ge_set_all_gej_var parameter order
7d893f4 Fix secp256k1_fe_inv_all_var parameter order
git-subtree-dir: src/secp256k1
git-subtree-split: 8225239f490f79842a5a3b82ad6cc8aa11d5208e
1a6eacb [QA] add fundrawtransaction test on a locked wallet with empty keypool (Jonas Schnelli)
c24a4f5 [Wallet] Bugfix: FRT: don't terminate when keypool is empty (Jonas Schnelli)
f36349e qt: Remove on_toggleNetworkActiveButton_clicked from RPCConsole (Wladimir J. van der Laan)
297cc20 qt: layoutAboutToChange signal is called layoutAboutToBeChanged (Wladimir J. van der Laan)
This resolves an issue where a wallet transaction which failed to
relay previously because it couldn't make it into the mempool
will not try again until restart, even though mempool conditions
may have changed.
Abandoned and known-conflicted transactions are skipped.
Some concern was expressed that there may be users with many
unknown conflicts would waste a lot of CPU time trying to
add them to their memory pools over and over again. But I am
doubtful these users exist in any number, if they do exist
they have worse problems, and they can mitigate any performance
issue this might have by abandoning the transactions in question.
This is another violation of the one definition rule, as the type
for mapOrphanTransactionsByPrev did not match the one in
net_processing.cpp anymore. As it now depends on a custom Iterator,
it seems too much hassle to correctly expose it to the tests.
Instead, this commit just removes the one test it was referenced in.
Add more comprehensive unit tests for CCoinsViewCache. Right now it is hard to
refactor caching code or fix bugs in the caching logic because you have to try
to mentally enumerate all the different states the cache might be in to make
sure a change doesn't cause unintended consequences. The new tests explicitly
enumerate relevant cache states, documenting and verifying the behavior in each
state, so it will be safer and easier to make changes to the caching code in
the future.
dd0df81 Document ConnectBlock connectTrace postconditions (Matt Corallo)
2d6e561 Switch pblock in ProcessNewBlock to a shared_ptr (Matt Corallo)
2736c44 Make the optional pblock in ActivateBestChain a shared_ptr (Matt Corallo)
ae4db44 Create a shared_ptr for the block we're connecting in ActivateBCS (Matt Corallo)
fd9d890 Keep blocks as shared_ptrs, instead of copying txn in ConnectTip (Matt Corallo)
6fdd43b Add struct to track block-connect-time-generated info for callbacks (Matt Corallo)
81e3228 Make CTransaction actually immutable (Pieter Wuille)
42fd8de Make DecodeHexTx return a CMutableTransaction (Pieter Wuille)
c3f5673 Make CWalletTx store a CTransactionRef instead of inheriting (Pieter Wuille)
a188353 Switch GetTransaction to returning a CTransactionRef (Pieter Wuille)
042f9fa qt: Show progress overlay when clicking spinner icon (Wladimir J. van der Laan)
827d9a3 qt: Replace NetworkToggleStatusBarControl with generic ClickableLabel (Wladimir J. van der Laan)
76faa3c Rename the remaining main.{h,cpp} to validation.{h,cpp} (Matt Corallo)
e736772 Move network-msg-processing code out of main to its own file (Matt Corallo)
87c35f5 Remove orphan state wipe from UnloadBlockIndex. (Matt Corallo)
Sorry for the churn on this, but the current message (introduced in #9073)
isn't acceptable:
$ src/bitcoin-cli getinfo
rpc: couldn't connect to server
(make sure server is running and you are connecting to the correct RPC port: -1 unknown)
Putting the error code after the words "RPC port" made me wonder whether
there was a port configuration issue.
This changes it to:
$ src/bitcoin-cli getinfo
error: couldn't connect to server: unknown (code -1)
(make sure server is running and you are connecting to the correct RPC port)
As orphan state is now "network state", like in
d6ea737be1,
UnloadBlockIndex is only used during init if we end up reindexing
to clear our block state so that we can start over. However, at
that time no connections have been brought up as CConnman hasn't
been started yet, so all of the network processing state logic is
empty when its called.
2c8c57e Document cs_main status when calling into PNB or PNBH (Matt Corallo)
58a215c Use ProcessNewBlockHeaders in CMPCTBLOCK processing (Matt Corallo)
a8b936d Use exposed ProcessNewBlockHeaders from ProcessMessages (Matt Corallo)
63fd101 Split ::HEADERS processing into two separate cs_main locks (Matt Corallo)
4a6b1f3 Expose AcceptBlockHeader through main.h (Matt Corallo)
This was misnamed, resulting in a warning message and missing
functionality. I'm not sure what the change in behavior will be here,
this needs testing.
Also remove connection to non-existing slot "test".
This was used for testing if the signal arrived. It is no
longer necessary.
Fixes:
2016-12-01 10:04:06 GUI: QObject::connect: No such signal PeerTableModel::layoutAboutToChange() in qt/rpcconsole.cpp:518
2016-12-01 10:04:06 GUI: QObject::connect: (receiver name: 'RPCConsole')
2016-12-01 10:04:06 GUI: QObject::connect: No such slot RPCConsole::test() in qt/rpcconsole.cpp:781
2016-12-01 10:04:06 GUI: QObject::connect: (receiver name: 'RPCConsole')
deec83f init: Get rid of fServer flag (Wladimir J. van der Laan)
16ca0bf init: Try to aquire datadir lock before and after daemonization (Wladimir J. van der Laan)
0cc8b6b init: Split up AppInit2 into multiple phases (Wladimir J. van der Laan)
Before daemonization, just probe the data directory lock and print an
early error message if possible.
After daemonization get the data directory lock again and hold on to it until exit
This creates a slight window for a race condition to happen, however this condition is harmless: it
will at most make us exit without printing a message to console.
$ src/bitcoind -testnet -daemon
Bitcoin server starting
$ src/bitcoind -testnet -daemon
Error: Cannot obtain a lock on data directory /home/orion/.bitcoin/testnet3. Bitcoin Core is probably already running.
When generating a new service key, explicitly request a RSA1024 one.
The bitcoin P2P protocol has no support for the longer hidden service names
that will come with ed25519 keys, until it does, we depend on the old
hidden service type so make this explicit.
See #9214.
Output instances of "BloomFilter" changed to "Bloom filter", in accordance with Wikipedia standard notation:
https://en.wikipedia.org/wiki/Bloom_filter
also to sync with the majority of cases in the self-same file
c7be56d net: push only raw data into CConnman (Cory Fields)
2ec935d net: add CVectorWriter and CNetMsgMaker (Cory Fields)
b7695c2 net: No need to check individually for disconnection anymore (Cory Fields)
fedea8a net: don't send any messages before handshake or after requested disconnect (Cory Fields)
d74e352 net: Set feelers to disconnect at the end of the version message (Cory Fields)
This fixes one of the last major layer violations in the networking stack.
The network side is no longer in charge of message serialization, so it is now
decoupled from Bitcoin structures. Only the header is serialized and attached
to the payload.
CVectorWriter is useful for overwriting or appending an existing byte vector.
CNetMsgMaker is a shortcut for creating messages on-the-fly which are suitable
for pushing to CConnman.
Bring up the modal progress overlay when the user clicks the spinner
icon in the task bar.
I think this is the intuitive thing to do when that icon is clicked.
ed998ea qt: Avoid OpenSSL certstore-related memory leak (Wladimir J. van der Laan)
5204598 qt: Avoid shutdownwindow-related memory leak (Wladimir J. van der Laan)
e4f126a qt: Avoid splash-screen related memory leak (Wladimir J. van der Laan)
693384e qt: Prevent thread/memory leak on exiting RPCConsole (Wladimir J. van der Laan)
47db075 qt: Plug many memory leaks (Wladimir J. van der Laan)
Also, send reject messages earlier in SendMessages(), so that disconnections are
processed earlier.
These changes combined should ensure that no message is ever sent after
fDisconnect is set.
This way we're not relying on messages going out after fDisconnect has been
set.
This should not cause any real behavioral changes, though feelers should
arguably disconnect earlier in the process. That can be addressed in a later
functional change.
d2b88f9 Move orphan-conflict removal from main logic into a callback (Matt Corallo)
97e2802 Erase orphans per-transaction instead of per-block (Matt Corallo)
ec4525c Move orphan processing to ActivateBestChain (Matt Corallo)
Make splash screen queue its own deletion when it receives the finished
command, instead of relying on WA_DeleteOnClose which doesn't work under
these circumstances.
Make ownership of the QThread object clear, so that the RPCConsole
can wait for the executor thread to quit before shutdown is called. This
increases overall thread safety, and prevents some objects from leaking
on exit.
None of these are very serious, and are leaks in objects that are
created at most one time.
In most cases this means properly using the QObject parent hierarchy,
except for BanTablePriv/PeerTablePriv which are not QObject,
so use a std::unique_ptr instead.
f004e67 Minor change to comment above new NODE_WITNESS service flag to keep it consitent with existing comment structure. Helps with readability. (Greg Walker)
Make sure that the count is a zero modulo the new mask before
scaling, otherwise the next time until a measure triggers
will take only 1/2 as long as accounted for. This caused
the 'min time' to be potentially off by as much as 100%.
When a BIP152 HB-mode peer is in the least preferred position and
disconnects, they will not be by ForNode on the next loop. They
will continue to sit in that position and prevent deactivating
HB mode for peers that are still connected.
There is no reason for them to stay in the list if already gone,
so drop the first element unconditionally if there are too many.
Fixes issue #9163.
037159c Remove block-request logic from INV message processing (Matt Corallo)
3451203 [qa] Respond to getheaders and do not assume a getdata on inv (Matt Corallo)
d768f15 [qa] Make comptool push blocks instead of relying on inv-fetch (mrbandrews)
- Do sorting for date, amount and confirmations column as longlong, not
unsigned longlong.
- Use `UserRole` to store our own data. This makes it treated as
ancillary data prevents it from being displayed.
- Get rid of `getMappedColumn` `strPad` - these are no longer necessary.
- Get rid of hidden `_INT64` columns.
- Start enumeration from 0 (otherwise values are undefined).
In 0.13 orphan transactions began being treated as implicit
INVs for their parents. But the resulting getdata were
not getting the witness flag.
This fixes issue #9182 reported by chjj and roasbeef on IRC.
Make a copy of the boost time-point to wait for, otherwise the head of
the queue may be deleted by another thread while this one is waiting,
while the boost function still has a reference to it.
Although this problem is in non-test code, this is not an actual problem
outside of the tests because we use the thread scheduler with only one
service thread, so there will never be threads fighting at the head of
the queue.
The old boost fallback escapes this problem because it passes a scalar
value to wait_until instead of a const object reference.
Found by running the tests in LLVM-4.0-master asan.
This further decouples "main" and "net" processing logic by moving
orphan processing out of the chain-connecting cs_main lock and
into its own cs_main lock, beside all of the other chain callbacks.
Once further decoupling of net and main processing logic occurs,
orphan handing should move to its own lock, out of cs_main.
Note that this will introduce a race if there are any cases where
we assume the orphan map to be consistent with the current chain
tip, however I am confident there is no such case (ATMP will fail
without DoS score in all such cases).
ae22357 Replace CValidationState param in ProcessNewBlock with BlockChecked (Matt Corallo)
7c98ce5 Remove pfrom parameter from ProcessNewBlock (Matt Corallo)
e2e069d Revert "RPC: Give more details when "generate" fails" (Matt Corallo)
dac53b5 Modify getblocktxn handler not to drop requests for old blocks (Russell Yanofsky)
55bfddc [qa] Fix stale data bug in test_compactblocks_not_at_tip (Russell Yanofsky)
47e9659 [qa] Fix bug in compactblocks v2 merge (Russell Yanofsky)
e2b3fb3 Optimize vInOutPoints insertion a bit (Matt Corallo)
eecffe5 Remove redundant duplicate-input check from CheckTransaction (Matt Corallo)
b2e178a Add deserialize + CheckBlock benchmarks, and a full block hex (Matt Corallo)
d59a518 Use fixed preallocation instead of costly GetSerializeSize (Pieter Wuille)
25a211a Add optimized CSizeComputer serializers (Pieter Wuille)
a2929a2 Make CSerAction's ForRead() constexpr (Pieter Wuille)
a603925 Avoid -Wshadow errors (Pieter Wuille)
5284721 Get rid of nType and nVersion (Pieter Wuille)
657e05a Make GetSerializeSize a wrapper on top of CSizeComputer (Pieter Wuille)
fad9b66 Make nType and nVersion private and sometimes const (Pieter Wuille)
c2c5d42 Make streams' read and write return void (Pieter Wuille)
50e8a9c Remove unused ReadVersion and WriteVersion (Pieter Wuille)
It is unexpected behavior for `ToString` to raise an exception. It
is expected to do a best-effort attempt at formatting but never fail.
Catch the exception and simply print unknown inv types as hexadecimal.
Fixes#9110.
4441018 Every main()/exit() should return/use one of EXIT_ codes instead of magic numbers (UdjinM6)
bd0de13 Fix exit codes: - `--help`, `--version` etc should exit with `0` i.e. no error ("not enough args" case should still trigger an error) - error reading config file should exit with `1` (UdjinM6)
d4833ff Bump the protocol version to distinguish new banning behavior. (Suhas Daftuar)
88c3549 Fix compact block handling to not ban if block is invalid (Suhas Daftuar)
c93beac [qa] Test that invalid compactblocks don't result in ban (Suhas Daftuar)
Dbwrapper used GetSerializeSize() to compute the size of the buffer
to preallocate. For some cases (specifically: CCoins) this requires
a costly compression call. Avoid this by just using fixed size
preallocations instead.
To get the advantages of faster GetSerializeSize() implementations
back that were removed in "Make GetSerializeSize a wrapper on top of
CSizeComputer", reintroduce them in the few places in the form of a
specialized Serialize() implementation. This actually gets us in a
better state than before, as these even get used when they're invoked
indirectly in the serialization of another object.
The CSerAction's ForRead() method does not depend on any runtime
data, so guarantee that requests to it can be optimized out by
making it constexpr.
Suggested by Cory Fields.
Remove the nType and nVersion as parameters to all serialization methods
and functions. There is only one place where it's read and has an impact
(in CAddress), and even there it does not impact any of the recursively
invoked serializers.
Instead, the few places that need nType or nVersion are changed to read
it directly from the stream object, through GetType() and GetVersion()
methods which are added to all stream classes.
Given that in default GetSerializeSize implementations created by
ADD_SERIALIZE_METHODS we're already using CSizeComputer(), get rid
of the specialized GetSerializeSize methods everywhere, and just use
CSizeComputer. This removes a lot of code which isn't actually used
anywhere.
For CCompactSize and CVarInt this actually removes a more efficient
size computing algorithm, which is brought back in a later commit.
The current getblocktxn implementation drops and ignores requests for old
blocks, which causes occasional sync_block timeouts during the
p2p-compactblocks.py test as reported in
https://github.com/bitcoin/bitcoin/issues/8842.
The p2p-compactblocks.py test setup creates many new blocks in a short
period of time, which can lead to getblocktxn requests for blocks below the
hardcoded depth limit of 10 blocks. This commit changes the getblocktxn
handler not to ignore these requests, so the peer nodes in the test setup
will reliably be able to sync.
The protocol change is documented in BIP-152 update "Allow block responses
to getblocktxn requests" at https://github.com/bitcoin/bips/pull/469.
The protocol change is not expected to affect nodes running outside the test
environment, because there shouldn't normally be lots of new blocks being
rapidly added that need to be synced.
The stream implementations had two cascading layers (the upper one
with operator<< and operator>>, and a lower one with read and write).
The lower layer's functions are never cascaded (nor should they, as
they should only be used from the higher layer), so make them return
void instead.
9027680 net: handle version push in InitializeNode (Cory Fields)
7588b85 net: construct CNodeStates in place (Cory Fields)
440f1d3 net: remove now-unused ssSend and Fuzz (Cory Fields)
5c2169c drop the optimistic write counter hack (Cory Fields)
ea33268 net: switch all callers to connman for pushing messages (Cory Fields)
3e32cd0 connman is in charge of pushing messages (Cory Fields)
b98c14c serialization: teach serializers variadics (Cory Fields)
Three categories of modifications:
1)
1 instance of 'The Bitcoin Core developers \n',
1 instance of 'the Bitcoin Core developers\n',
3 instances of 'Bitcoin Core Developers\n', and
12 instances of 'The Bitcoin developers\n'
are made uniform with the 443 instances of 'The Bitcoin Core developers\n'
2)
3 instances of 'BitPay, Inc\.\n' are made uniform with the other 6
instances of 'BitPay Inc\.\n'
3)
4 instances where there was no '(c)' between the 'Copyright' and the year
where it deviates from the style of the local directory.
- `--help`, `--version` etc should exit with `0` i.e. no error ("not enough args" case should still trigger an error)
- error reading config file should exit with `1`
Slightly refactor AppInitRPC/AppInitRawTx to return standard exit codes (EXIT_FAILURE/EXIT_SUCCESS) or CONTINUE_EXECUTION (-1)
The changes here are dense and subtle, but hopefully all is more explicit
than before.
- CConnman is now in charge of sending data rather than the nodes themselves.
This is necessary because many decisions need to be made with all nodes in
mind, and a model that requires the nodes calling up to their manager quickly
turns to spaghetti.
- The per-node-serializer (ssSend) has been replaced with a (quasi-)const
send-version. Since the send version for serialization can only change once
per connection, we now explicitly tag messages with INIT_PROTO_VERSION if
they are sent before the handshake. With this done, there's no need to lock
for access to nSendVersion.
Also, a new stream is used for each message, so there's no need to lock
during the serialization process.
- This takes care of accounting for optimistic sends, so the
nOptimisticBytesWritten hack can be removed.
- -dropmessagestest and -fuzzmessagestest have not been preserved, as I suspect
they haven't been used in years.
This allows future software that would relay compact blocks before
full validation to announce only to peers that will not ban if the
block turns out to be invalid.
f5b960b Move nTimeBestReceived updating into net processing code (Matt Corallo)
d8670fb Move all calls to CheckBlockIndex out of net-processing logic (Matt Corallo)
d6ea737 Remove network state wipe from UnloadBlockIndex. (Matt Corallo)
fc0c24f Move MarkBlockAsReceived out of ProcessNewMessage (Matt Corallo)
65f35eb Move FlushStateToDisk call out of ProcessMessages::TX into ATMP (Matt Corallo)
59ac5c5 net: Use deterministic randomness for CNode's nonce, and make it const (Cory Fields)
aff6584 net: constify a few CNode vars to indicate that they're threadsafe (Cory Fields)
Check for unreasonable alloc size in LockedPool rather than lancing through new
Arenas until we improbably find one worthy of the quixotic request or the system
can support no more Arenas.
- Use the python standard logging library
- Run all tests and report all failing test-cases (rather than stop after one test case fails)
- If output is different from expected output, log a contextual diff.
Refer to the right file in the top-level README.md.
Having only one file with test documentation saves some confusion about
where things are documented.
444c673 bench: Add benchmark for lockedpool allocation/deallocation (Wladimir J. van der Laan)
6567999 rpc: Add `getmemoryinfo` call (Wladimir J. van der Laan)
4536148 support: Add LockedPool (Wladimir J. van der Laan)
f4d1fc2 wallet: Get rid of LockObject and UnlockObject calls in key.h (Wladimir J. van der Laan)
999e4c9 wallet: Change CCrypter to use vectors with secure allocator (Wladimir J. van der Laan)
GetTotalBlocksEstimate is no longer used and it was the only thing
the checkpoint tests were testing.
Since checkpoints are on their way out it makes more sense to remove
the test file than to cook up a new pointless test.
This introduces a 'minimum chain work' chainparam which is intended
to be the known amount of work in the chain for the network at the
time of software release. If you don't have this much work, you're
not yet caught up.
This is used instead of the count of blocks test from checkpoints.
This criteria is trivial to keep updated as there is no element of
subjectivity, trust, or position dependence to it. It is also a more
reliable metric of sync status than a block count.
Fixes newly initialized bloom filters being
constructed with isEmpty(false), which still
works but loses the possible speedup when
checking for key membership in an empty filter.
This will result in many more calls to CheckBlockIndex when
connecting a list of headers (eg in ::HEADERS messages processing)
but its only enabled in debug mode, and that should mostly just be
during IBD, so it should be OK.
UnloadBlockIndex is only used during init if we end up reindexing
to clear our block state so that we can start over. However, at
that time no connections have been brought up as CConnman hasn't
been started yet, so all of the network processing state logic is
empty when its called.
Additionally, the initialization of the recentRejects set is moved
to InitPeerLogic.
This splits the output comparison for `bitcoin-tx` into two steps:
- First, check for data mismatch, parsing the data as json or hex
depending on the extension of the output file
- Then, check if the literal string matches
For either of these cases give a different error.
This prevents wild goose chases when e.g. a trailing space doesn't match
exactly, and makes sure that both test output and examples are valid
data of the purported format.
Recent discussion (in IRC meetings, and e.g. #8989) has shown a
preference for the default confirm target for smartfees to be 6 instead
of 2, to avoid overpaying fees for questionable gain.
6 is also a compromise between the GUI's pre-#8989 value of 25 and the
bitcoind `-txconfirmtarget` default of 2. These were unified in #8989,
but this has made the (overly expensive) default of 2 as GUI default.
```
getmemoryinfo
Returns an object containing information about memory usage.
Result:
{
"locked": { (json object) Information about locked memory manager
"used": xxxxx, (numeric) Number of bytes used
"free": xxxxx, (numeric) Number of bytes available in current arenas
"total": xxxxxxx, (numeric) Total number of bytes managed
"locked": xxxxxx, (numeric) Amount of bytes that succeeded locking. If this number is smaller than total, locking pages failed at some point and key data could be swapped to disk.
}
}
Examples:
> bitcoin-cli getmemoryinfo
> curl --user myusername --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getmemoryinfo", "params": [] }' -H 'content-type: text/plain;' http://127.0.0.1:8332/
```
Add a pool for locked memory chunks, replacing LockedPageManager.
This is something I've been wanting to do for a long time. The current
approach of locking objects where they happen to be on the stack or heap
in-place causes a lot of mlock/munlock system call overhead, slowing
down any handling of keys.
Also locked memory is a limited resource on many operating systems (and
using a lot of it bogs down the system), so the previous approach of
locking every page that may contain any key information (but also other
information) is wasteful.
