* fix issue where viewcounts were creating a new line
* conditionally add large view css
* conditionally apply class based on if view count should be shown
* last couple touchups
* clean up the css
* add scss to flow config
* add scss component to flow config
It was being recalculated repeatedly.
This memoizes it, although it still re-calculates occasionally despite none of the source arrays changed. I think it is due to the state change in the Preference Sync.
Note: input selectors to `createSelector` needs to be extractions-only (i.e. must not have transformations). I think most of our `makeSelect*` selectors violate this and broke memoization.
## Issue
7176
## Changes
Pitfalls of pausing render via React.memo:
- We'll miss the `doClaimSearch()` since that is sparked by an `useEffect`.
Seems like we can't avoid having a redundant copy of the previously-displayed URIs.
## Ticket
7165 homepage queries don't take into account blocked channel ids (mute does)
## Changes
resolveSearchOptions: was not grabbing redux data correctly.
* ❌ Remove old method of displaying active livestreams
Completely remove it for now to make the commit deltas clearer.
We'll replace it with the new method at the end.
* Fetch and store active-livestream info in redux
* Tiles can now query active-livestream state from redux instead of getting from parent.
* ⏪ ClaimTilesDiscover: revert and cleanup
## Simplify
- Simplify to just `uris` instead of having multiple arrays (`uris`, `modifiedUris`, `prevUris`)
- The `prevUris` is for CLS prevention. With this removal, the CLS issue is back, but we'll handle it differently later.
- Temporarily disable the view-count fetching. Code is left there so that I don't forget.
## Fix
- `shouldPerformSearch` was never true when `prefixUris` is present. Corrected the logic.
- Aside: prefix and pin is so similar in function. Hm ....
* ClaimTilesDiscover: factor out options
## Change
Move the `option` code outside and passed in as a pre-calculated prop.
## Reason
To skip rendering while waiting for `claim_search`, we need to add `React.memo(areEqual)`. However, the flag that determines if we are fetching `claim_search` (fetchingClaimSearchByQuery[]) depends on the derived options as the key.
Instead of calculating `options` twice, we moved it to the props so both sides can use it.
It also makes the component a bit more readable.
The downside is that the prop-passing might not be clear.
* ClaimTilesDiscover: reduce ~17 renders at startup to just 2.
* ClaimTilesDiscover: fill with placeholder while waiting for claim_search
## Issue
Livestream claims are fetched seperately, so they might already exists. While claim_search is running, the list only consists of livestreams (collapsed).
## Fix
Fill up the space with placeholders to prevent layout shift.
* Add 'useFetchViewCount' to handle fetching from lists
This effect also stashes fetched uris, so that we won't re-fetch the same uris during the same instance (e.g. during infinite scroll).
* ⏪ ClaimListDiscover: revert and cleanup
## Revert
- Removed the 'finalUris' stuff that was meant to "pause" visual changes when fetching. I think it'll be cleaner to use React.memo to achieve that.
## Alterations
- Added `renderUri` to make it clear which array that this component will render.
- Re-do the way we fetch view counts now that 'finalUris' is gone. Not the best method, but at least correct for now.
* ClaimListDiscover: add prefixUris, similar to ClaimTilesDiscover
This will be initially used to append livestreams at the top.
* ✅ Re-enable active livestream tiles using the new method
* doFetchActiveLivestreams: add interval check
- Added a default minimum of 5 minutes between fetches. Clients can bypass this through `forceFetch` if needed.
* doFetchActiveLivestreams: add option check
We'll need to support different 'orderBy', so adding an "options check" when determining if we just made the same fetch.
* WildWest: limit livestream tiles + add ability to show more
Most likely this behavior will change in the future, so we'll leave `ClaimListDiscover` untouched and handle the logic at the page level.
This solution uses 2 `ClaimListDiscover` -- if the reduced livestream list is visible, it handles the header; else the normal list handles the header.
* Use better tile-count on larger screens.
Used the same method as how the homepage does it.
* Embed: add replay button
Also, changed "Rewatch or Discuss" to "Discuss + external arrow" since there is a dedicated re-watch button.
* Embed: resize "ended message" based on container height
## Issue
Closes 7121 Missing mod block option (large number of moderated channels?)
## Notes
It was bad to assume `channelSignatures` would be the same length as the promise result -- any failure in signing would cause a misalignment.
For my case, an accidentally-merged channel couldn't be signed due to a missing private key. I think it's the same for Drew.
## Issue
If you navigated to a Channel Page and returned to the homepage (or any page with ClaimPreview), the view-count is shown because we have that data.
## Fix
Instead of passing props around through the long "list" component chain (`ChannelContent -> ClaimListDiscover -> ClaimList -> ClaimPreview`) to indicate whether we should display it , just check the pathname at the lowest component level; I believe eventually we would display it everywhere anyways, so this we'll be the easiest to clean up.
## Issue
7102 Failed to initialize numberformat on some browsers
## Changes
Just revert to the non-SI notation (but still locale aware) for browsers that does not support the `compactDisplay` option.
I thought of adding an English-only abbreviation for that corner-case, but I think it's not worth the effort maintaining. There are worse issues happening on older browsers, such as icons not aligning properly in buttons and functions that require polyfilling.
## Issues
https://discord.com/channels/362322208485277697/646840786662719488/887345736033918997
## Changes
I meant to only add the macro at the client call during the refactoring, but forgot.
Having said that, I now think it's cleaner to put the macro where it is defined, and it's easier for Translators to find, so I added the macro in the definition instead of at the client call.
## Issue
1. Type something in the wunderbar.
2. While the spinner is running, press Tab to focus on "View results" button.
3. If the spinner is still running, the entire popup gets dismissed (it should not). If the spinner isn't running, the popup stays active.
## Change
It was explicitly dismissed when the <input> loses focus. It shouldn't do that if any child of the popup is in focus.
## Issue
7075 Move "explore tags" to a stable position
## Changes
Move the buttons in the suggestions popup to the top row so that it's position won't be constantly changing depending on the number of results.
## Issue
5848 Remove scroll-bar in update prompt
## Changes
- Make scrollbars appear only when necessary.
- Style the scrollbar. Similar to other areas, we skip this for Mac (can't recall why we need to skip).
* Fix Floating Player stopping on certain files
* Dont show additional player buttons from markdown and comments
* Fix markdown resizing for the same video playing
* Update changelog
* Sort props to clarify "client vs. redux". No functional change.
* ClaimListHeader: remove SIMPLE_SITE gating
* Channel Page: enable filters; add "sort by" filter.
## Issue
7059 Add option to sort oldest first on channel page
## Changes
- Enabled filters for Odysee.
- Added a new "Sort By" filter, which will only appear for "New" ordering. It doesn't make sense for "Trending" or "Top".
## Issue
7003 Can't unblock if delegator deleted their channel
## Changes
- Changed the function parameter from 'creatorId' to 'creatorUri'
- It got short-circuited because we don't resolve deleted channels. But the client already have the full creator URI (containing the needed 'name' and 'id'), so there is no need to actually look at the resolved list -- just pass the uri like all the other functions.
* Paginate: add option to disable history and url param
* Refactored blocklists into `BlockList`; no functional change
Reason:
- With each list (Personal, Admin, Mod, Muted), there's a bunch of useEffects and variables needed to handle the state. All of them are doing 99% similar things.
* Paginate blocklists
6834
* Improve 'moderator-block' list visuals
- Added "Blocked on behalf of" to make things clearer.
- Use smaller ClaimPreview for delegators to save space (there might be lots of delegators)
* Add search bar to BlockList
6834
- Only supports channel-name search, per 6834. Channel-title search would probably be too heavy on the client side.
- Fuzzy search is possible, but is too slow on huge lists. Ended up with a simpler `matchSorter.rankings.CONTAINS`, which I think would cover typical cases.
## Issue
6776 Missing follow button on channel reposts
- Missing:
- Fix: For reposts, `parseURI` will fail to determine if it's a channel because the URL doesn't have enough info. Determine from the claim object instead.
- Not working in Channel Page:
- Fix: The repost uri doesn't link back to the source channel, so we'll need to handle it.
* show error from backend properly
* cleanup code and add documentation
* persist active tab but force people to boost tab if it's on their own upload
* set tip lbc as default when none is saved in state
## Issue
3587 Show content view counts on channel pages
## Notes
Limited to just "channel pages" for now as specified in the ticket.
Can be enabled for all claim previews, as long as there's an efficient spot to run the batch fetching. Either make `fetchViewCount` prop default to true, or add the parameter in places that need it.
- Factor out for re-use in upcoming Shared Blocklist
- Improvements:
- Uses floating popup to show the suggestion/result rather than inline.
- Users can now press Enter to select the suggestion, instead of having to use the mouse.
- Users now don't need to enter '@' for channel names. They will still need to enter the full channel name, and disambiguate with claim_id if necessary.
- Fix jumpiness in position as the user types.
Quick fix for the lack of scroll lines for the upcoming "moderator search popup". The proper fix would be to move the popup above the input when we are at the extreme bottom.
A better fix with extra specificity, since the main issue was with form-fields only. The previous fix was too wide and broke other areas with column flex.
Reasons:
- Better symmetry.
- When used on a form-field label, the off-centeredness causes an extra offset at the top. Since the icon goes away when there is an input error, the form-field shifts a bit. (An alternative is to use a smaller icon, but I think size 16 is the best for legibility).
- Reverted #7004 as it ended up preventing the rest of the components from being localized when there is an error. Replaced that with a `setLabel` that simply checks if the component exists before setting the label.
- Fix "Autoplay Next On" not localized on initial load -- it was only localized when the setting changes. It is unfortunate that we need to also set the label in an additional `useEffect` instead of just using vjs events, but so be it.
## Preamble
- The app-side uses a cached blocklist, so when a Timeout expires, it doesn't know that the ban has been lifted.
- Meanwhile, we are doing extra comment filtering using this blocklist (so that we don't see comments that we have blocked, regardless of whose claim we are viewing).
## Issue
In a livestream, if a new message from an ex-offender comes in after their ban has been lifted, we do get the websocket message but it's being filtered out locally as mentioned above. So, the msg ended up being visible for everyone except the owner.
## Fix (band aid)
- Don't run the extra filter if the claim we are viewing is ours -- commentron would have filtered it for us anyways, and is the right logic to use even before this Timeout feature is introduced.
- For the case of Timeout, this only serves as a band-aid until Commentron Issue 80 is available for us to detect the ban has been lifted. This is because it doesn't handle the case where I am a viewer and I decided to timeout someone for a few minutes. Because I am not the owner of the claim, the offender will continue to be blocked due to the same issue mentioned above.
The main reason to do this is because we are doing extra comment filtering using our blocklist (so that we don't see people we blocked regardless on who's content we are at), but we are also using a cached blocklist so we don't know when a Timeout will be lifted to allow new livestream messages. We will need Commentron Issue-80 to truly fix this.
For the case of when we are the owner of the content, we don't run the extra filtering (since it is equivalent to Commentron's filtering), hence the issue doesn't exist. Any new livestream messages received through websocket won't be locally filtered.
## Issue
6712 Comment Moderation - time based bans
## Approach
- Consolidated the 3 types of blocking buttons in the comment content menu (i.e. Block, Moderator Block, Admin Block) into 1 regular Block button.
- Show a modal when Block is clicked.
- Let user choose the blocklist.
- Let user choose the timeout duration (this PR's impetus).
* recsys wip
better logging
fix floating player popout playing uri bug with recsys
lint
add empty entries to create
use beacon; fire on visibilitychange
cleanup, not record recs if not seen
ifweb recsys beacon
recsys handle embeds, cleanup
use history.listen to trigger events
fix recsys embed bug
bugfix
more default data
cleaner
cleaner
* remove tentative
* disable recsys debug logging
* Dont show countdown on Lists
* Add Repeat icon
* Add Shuffle icon
* Add Replay Icon
* Add Replay Option to autoplayCountdown
* Add Loop Control for Lists
* Add Shuffle control for Lists
* Improve View List Link and Fetch action
* Add Play Button to List page
* Add Shuffle Play Option on List Page and Menus
* Fix Modal Remove Collection I18n
* CSS: Fix Large list titles
* Fix List playback on Floating Player
* Add Theater Mode to its own class and fix bar text display
* Add Play Next VJS component
* Add Play Next Button
* Add Play Previous VJS Component
* Add Play Previous Button
* Add Autoplay Next Button
* Add separate control for autoplay next in list
* Bump redux
* Update CHANGELOG.md
## Issue
6989 console errors and warnings are getting out of hand!
## Notes
This method was previously criticized in 5643. But given that no better solution has been submitted after a long while, nor is there a new solution for doing i18n, I'm reviving it again. It'll be no worse from the status quo.
Despite try-catch being overkill, I think the code-clarity outweighs the performance issues (if any, in the first place). Also, we are only suppressing the error in a very specialized function which even if it fails, will simply be a no-op and the GUI falling back to English.
## Ticket
6946: Linked-comment scroll position is inconsistent
## Issues
- If it is a deeply-nested reply, the positioning is incorrect.
- If there are pinned comments, the positioning is way off.
- If there is a delay in mounting, the positioning doesn't happen.
- When clicking on the comment's date to highlight it, the comment goes missing and the scroll position is weird.
## Changes
- Take into account that replies can be linked-comments.
- Perform a "one-time" search for the linked-comment after the initial fetch, if necessary. The expensive DOM search is only be executed minimally.
Remove defunct "show comment menu on hover" implementation.
It was re-rendering on every mouse movement, plus the css classname no longer exists, and also it wasn't working right in the first place (reverted few Desktop revision back, and all it did was highlighting the menu rather than controlling the visibility).
If we want the "show comment menu on hover" behavior again in the future, the CPU usage problem can probably be addressed by debouncing/throttling state-change.
Trying to action this issue: Pressing escape in wunderbar should do something useful #2116, I also added ctrl-K as a keyboard shortcut to bring the wunderbar into focus.
## Issue
- While changing the "Back" behavior in the Settings Page PR, it was a pain to troubleshoot when the entire history list is listed as "odysee.com".
- If you have multiple tabs open, it's hard to know which is which for non-claim and non-channel pages.
## Approach
Initially, I thought of overriding the document's title through the `<Page>` component, since the titles are usually defined there. However, given that the router is already doing the overriding, I think it's best to do the same thing all in one place.
Downside: it might get missed when a new page is added.
## Unknown
- Not sure if are rules for titles. There seems to be a mix of sites -- some have specific titles per page, most just use the site title for each page.
- I think the `return` statement in the `useEffect` is unnecessary, since it'll just be setting to the same value now during the cleanup stage. (??)
## Issue
6956 Desktop: something wrong with Custom Comment Server setting
## Notes
- Should be calling `Comments.setServerUrl` to ensure all private variables are updated.
- Skip the react-setting update if there is no change.
## Issue
- #6840 Clean up https://odysee.com/$/big_hits
- `/big_hits` is being indexed and unnecessarily affecting the speed score (the "not found" page is surprisingly slow; will handle separately)
- Big-Hits metadata not working
## Notes
'big_hits' is only used in v1 homepages.
more improvements, fix url, do the same for cover
remember url, error if invalid
unneeded addition
Fix delayed message
Lint
Allow empty values (placeholder and Gerbil)
Fix filepath crash
Fix button
Previously, we decide when to display "Show More" based on the current fetched reply count vs. total replies in Commentron. It was already troublesome as `comment.List` and `comment.replies` give different values (one includes blocked content, while another does not).
Now, we are further filtering the list with Commentron blocklists (personal, admin, moderator), so it is not feasible to run the logic based on reply count.
## Solution
- Keep track of number of remaining pages instead and use that to determine when to display "Show More".
- While it doesn't solve the "Show N replies" mismatch (YT has this problem too), it prevents the button from lingering.
- In the event that all replies are blocked, just show an empty space (same as YT). I didn't like the previous version that cluttered the space with "comment(s) blocked".
## Issue
When you block Channel-X, Channel-X's comments will still be visible on someone else's content. This feels odd.
## Change
In addition to the blacklist, filter-list and muted-list, we now include the Commentron blocklists (personal, admin, moderator) when filtering out comments.
## Specifics
`makeSelectCommentsForUri`, `makeSelectTopLevelCommentsForUri` and `makeSelectRepliesForParentId` all perform the same filtering code. Factor that out to `makeSelectFilteredComments` and add the Commentron lists into the mix.
## Downsides
This probably adds to the already-high CPU usage in rendering comments.
The previous version treats each navigation as a link, ala Chrome Settings. I liked it because I can enter a settings section directly via URL, and can always back-track each section.
Anyway, changed it to the typical "up" behavior, traversing back the hierarchy of settings pages.
It was phrased negatively as the feedback back then was the string should match whatever is on the actual dialog (which was "Skip preview and confirmation"). But now it looks odd when we have an additional title string. We think titles should be positively phrased, hence the change.
Changed from constants to object. This allows us to skip prettier's auto line-breaking with just one comment (instead of for each constant), plus I like object style to group things together in general.
I think it looks better to not place the title within the card's border when there are multiple cards in a page, like in the case of the new Settings Layout. Otherwise, it's hard to differentiate between title and settings-row.
The proper method is to style Card itself, but this is a quick fix for the Settings Page PR. Will come back to it later.
All <Setting*> components will have an ID that corresponds to the sidebar link. When clicked, we scroll to the position of the card by searching for the element with the ID. It behaves simiar to # anchor navigation.
I like this model mainly because in Mobile, users don't need to keep opening the drawer to navigate -- they just need to scroll. This allows us to use the same design for Mobile and App.
Placed settings that we allow for unauthenticated users under <SettingUnauthenticated>. While it is redundant, it's easier to handle the grouping, and more readable overall.
Also made visual changes for the new Settings Page.
## SyncToggle:
It will no longer be under a dedicated Card, so the "Sync" title is not there to give context for the case of "no verified email".
Changed it such that the checkbox is always visible (it's label is self-explanatory) but disable when email is not set. The "Add Email" button will then appear below, so everything now makes sense in context.
* remove help card from lists page
* filtering to playlists page
* refactor
* clear playlists filter on escape
* rename
* no show playlist limit for now
## Issue
If the linked-comment is also a pinned comment, it was displayed twice.
## Fix
When separating out pinned comments, I forgot that `comment.ByID` was another place where we fetch comments.
