A better fix with extra specificity, since the main issue was with form-fields only. The previous fix was too wide and broke other areas with column flex.
Reasons:
- Better symmetry.
- When used on a form-field label, the off-centeredness causes an extra offset at the top. Since the icon goes away when there is an input error, the form-field shifts a bit. (An alternative is to use a smaller icon, but I think size 16 is the best for legibility).
- Reverted #7004 as it ended up preventing the rest of the components from being localized when there is an error. Replaced that with a `setLabel` that simply checks if the component exists before setting the label.
- Fix "Autoplay Next On" not localized on initial load -- it was only localized when the setting changes. It is unfortunate that we need to also set the label in an additional `useEffect` instead of just using vjs events, but so be it.
## Preamble
- The app-side uses a cached blocklist, so when a Timeout expires, it doesn't know that the ban has been lifted.
- Meanwhile, we are doing extra comment filtering using this blocklist (so that we don't see comments that we have blocked, regardless of whose claim we are viewing).
## Issue
In a livestream, if a new message from an ex-offender comes in after their ban has been lifted, we do get the websocket message but it's being filtered out locally as mentioned above. So, the msg ended up being visible for everyone except the owner.
## Fix (band aid)
- Don't run the extra filter if the claim we are viewing is ours -- commentron would have filtered it for us anyways, and is the right logic to use even before this Timeout feature is introduced.
- For the case of Timeout, this only serves as a band-aid until Commentron Issue 80 is available for us to detect the ban has been lifted. This is because it doesn't handle the case where I am a viewer and I decided to timeout someone for a few minutes. Because I am not the owner of the claim, the offender will continue to be blocked due to the same issue mentioned above.
The main reason to do this is because we are doing extra comment filtering using our blocklist (so that we don't see people we blocked regardless on who's content we are at), but we are also using a cached blocklist so we don't know when a Timeout will be lifted to allow new livestream messages. We will need Commentron Issue-80 to truly fix this.
For the case of when we are the owner of the content, we don't run the extra filtering (since it is equivalent to Commentron's filtering), hence the issue doesn't exist. Any new livestream messages received through websocket won't be locally filtered.
## Issue
6712 Comment Moderation - time based bans
## Approach
- Consolidated the 3 types of blocking buttons in the comment content menu (i.e. Block, Moderator Block, Admin Block) into 1 regular Block button.
- Show a modal when Block is clicked.
- Let user choose the blocklist.
- Let user choose the timeout duration (this PR's impetus).
* recsys wip
better logging
fix floating player popout playing uri bug with recsys
lint
add empty entries to create
use beacon; fire on visibilitychange
cleanup, not record recs if not seen
ifweb recsys beacon
recsys handle embeds, cleanup
use history.listen to trigger events
fix recsys embed bug
bugfix
more default data
cleaner
cleaner
* remove tentative
* disable recsys debug logging
* Dont show countdown on Lists
* Add Repeat icon
* Add Shuffle icon
* Add Replay Icon
* Add Replay Option to autoplayCountdown
* Add Loop Control for Lists
* Add Shuffle control for Lists
* Improve View List Link and Fetch action
* Add Play Button to List page
* Add Shuffle Play Option on List Page and Menus
* Fix Modal Remove Collection I18n
* CSS: Fix Large list titles
* Fix List playback on Floating Player
* Add Theater Mode to its own class and fix bar text display
* Add Play Next VJS component
* Add Play Next Button
* Add Play Previous VJS Component
* Add Play Previous Button
* Add Autoplay Next Button
* Add separate control for autoplay next in list
* Bump redux
* Update CHANGELOG.md
## Issue
6989 console errors and warnings are getting out of hand!
## Notes
This method was previously criticized in 5643. But given that no better solution has been submitted after a long while, nor is there a new solution for doing i18n, I'm reviving it again. It'll be no worse from the status quo.
Despite try-catch being overkill, I think the code-clarity outweighs the performance issues (if any, in the first place). Also, we are only suppressing the error in a very specialized function which even if it fails, will simply be a no-op and the GUI falling back to English.
## Ticket
6946: Linked-comment scroll position is inconsistent
## Issues
- If it is a deeply-nested reply, the positioning is incorrect.
- If there are pinned comments, the positioning is way off.
- If there is a delay in mounting, the positioning doesn't happen.
- When clicking on the comment's date to highlight it, the comment goes missing and the scroll position is weird.
## Changes
- Take into account that replies can be linked-comments.
- Perform a "one-time" search for the linked-comment after the initial fetch, if necessary. The expensive DOM search is only be executed minimally.
Remove defunct "show comment menu on hover" implementation.
It was re-rendering on every mouse movement, plus the css classname no longer exists, and also it wasn't working right in the first place (reverted few Desktop revision back, and all it did was highlighting the menu rather than controlling the visibility).
If we want the "show comment menu on hover" behavior again in the future, the CPU usage problem can probably be addressed by debouncing/throttling state-change.
Trying to action this issue: Pressing escape in wunderbar should do something useful #2116, I also added ctrl-K as a keyboard shortcut to bring the wunderbar into focus.
## Issue
- While changing the "Back" behavior in the Settings Page PR, it was a pain to troubleshoot when the entire history list is listed as "odysee.com".
- If you have multiple tabs open, it's hard to know which is which for non-claim and non-channel pages.
## Approach
Initially, I thought of overriding the document's title through the `<Page>` component, since the titles are usually defined there. However, given that the router is already doing the overriding, I think it's best to do the same thing all in one place.
Downside: it might get missed when a new page is added.
## Unknown
- Not sure if are rules for titles. There seems to be a mix of sites -- some have specific titles per page, most just use the site title for each page.
- I think the `return` statement in the `useEffect` is unnecessary, since it'll just be setting to the same value now during the cleanup stage. (??)
## Issue
6956 Desktop: something wrong with Custom Comment Server setting
## Notes
- Should be calling `Comments.setServerUrl` to ensure all private variables are updated.
- Skip the react-setting update if there is no change.
## Issue
- #6840 Clean up https://odysee.com/$/big_hits
- `/big_hits` is being indexed and unnecessarily affecting the speed score (the "not found" page is surprisingly slow; will handle separately)
- Big-Hits metadata not working
## Notes
'big_hits' is only used in v1 homepages.
more improvements, fix url, do the same for cover
remember url, error if invalid
unneeded addition
Fix delayed message
Lint
Allow empty values (placeholder and Gerbil)
Fix filepath crash
Fix button
Previously, we decide when to display "Show More" based on the current fetched reply count vs. total replies in Commentron. It was already troublesome as `comment.List` and `comment.replies` give different values (one includes blocked content, while another does not).
Now, we are further filtering the list with Commentron blocklists (personal, admin, moderator), so it is not feasible to run the logic based on reply count.
## Solution
- Keep track of number of remaining pages instead and use that to determine when to display "Show More".
- While it doesn't solve the "Show N replies" mismatch (YT has this problem too), it prevents the button from lingering.
- In the event that all replies are blocked, just show an empty space (same as YT). I didn't like the previous version that cluttered the space with "comment(s) blocked".
## Issue
When you block Channel-X, Channel-X's comments will still be visible on someone else's content. This feels odd.
## Change
In addition to the blacklist, filter-list and muted-list, we now include the Commentron blocklists (personal, admin, moderator) when filtering out comments.
## Specifics
`makeSelectCommentsForUri`, `makeSelectTopLevelCommentsForUri` and `makeSelectRepliesForParentId` all perform the same filtering code. Factor that out to `makeSelectFilteredComments` and add the Commentron lists into the mix.
## Downsides
This probably adds to the already-high CPU usage in rendering comments.
The previous version treats each navigation as a link, ala Chrome Settings. I liked it because I can enter a settings section directly via URL, and can always back-track each section.
Anyway, changed it to the typical "up" behavior, traversing back the hierarchy of settings pages.
It was phrased negatively as the feedback back then was the string should match whatever is on the actual dialog (which was "Skip preview and confirmation"). But now it looks odd when we have an additional title string. We think titles should be positively phrased, hence the change.
Changed from constants to object. This allows us to skip prettier's auto line-breaking with just one comment (instead of for each constant), plus I like object style to group things together in general.
I think it looks better to not place the title within the card's border when there are multiple cards in a page, like in the case of the new Settings Layout. Otherwise, it's hard to differentiate between title and settings-row.
The proper method is to style Card itself, but this is a quick fix for the Settings Page PR. Will come back to it later.
All <Setting*> components will have an ID that corresponds to the sidebar link. When clicked, we scroll to the position of the card by searching for the element with the ID. It behaves simiar to # anchor navigation.
I like this model mainly because in Mobile, users don't need to keep opening the drawer to navigate -- they just need to scroll. This allows us to use the same design for Mobile and App.
Placed settings that we allow for unauthenticated users under <SettingUnauthenticated>. While it is redundant, it's easier to handle the grouping, and more readable overall.
Also made visual changes for the new Settings Page.
## SyncToggle:
It will no longer be under a dedicated Card, so the "Sync" title is not there to give context for the case of "no verified email".
Changed it such that the checkbox is always visible (it's label is self-explanatory) but disable when email is not set. The "Add Email" button will then appear below, so everything now makes sense in context.
* remove help card from lists page
* filtering to playlists page
* refactor
* clear playlists filter on escape
* rename
* no show playlist limit for now
## Issue
If the linked-comment is also a pinned comment, it was displayed twice.
## Fix
When separating out pinned comments, I forgot that `comment.ByID` was another place where we fetch comments.
* Automatically claim initial rewards (new_user & email_verified) when accessing creating channel, edit channel and upload
* Do not try to get initial rewards if already claimed.
## Tickets
- 5504 Signing out of account causes page to break in other tabs
- 6829 merged accounts - force log out / fail sync when x-auth-token and cookie auth token are different
## Steps to replicate
1. Login to odysee with account-A.
2. Open another tab, and split both tabs on the screen.
3. Logout from the 1st tab. Do not activate (focus) the 2nd tab.
4. On the 1st tab, login with account-B.
5. Activate (focus) the 2nd tab. The wallet would have been merged, and we are still logged in as account-A.
## Approach
Reload when the LBRY API token no longer matches the auth token.
## Ticket
5457 Create file thumbnail fallback image for odysee
## Approach
Since `background-image` does not invoke an `onerror` event, create a test Image instance to have the `onerror` capability. This technique is used by majority of plugins. No additional fetch is seen with this technique.
## Ticket
6879: Previously pinned livestream comments show as latest
## Issue
`comment.List` will always display the pinned comment first, hence the problem when the chat is refreshed.
## Approach
Completely split pinned comments from top-level comments in the Reducer, and the let the GUI (e.g. regular comments, livestream comments) decide how they want to display it.
For the case of livestream, there is no need to repeat the pinned comments in the regular chat area, since there is a dedicated area on top.
## Ticket
6886 Livestream auto-scroll problems
## Issue
- `performedInitialScroll` was problematic as it won't allow auto-scroll even when user scrolled back to the bottom.
- The dependence on `commentElement` seems to assume a certain comment height? Not sure.
## Approach
- Add a scroll listener and stash the last scroll position.
- When a message is received, check if it's at the bottom. If yes, maintain that position after the new comment is added. If not, leave as is.
- When submitting a comment, always reset to the bottom.
## Ticket
6743: Desktop: "Back" in Following Page no longer restores scroll position
## Issue
This was a side-effect of "6609 claimListDiscover: don't re-render until query is done". That PR did not handle the case of navigating backwards, which typically would just need to display past results. It ended up always starting with a blank list on mount, so the scroll position could not be restored correctly.
I don't know why it still worked on Web/Chrome -- maybe the latest browser knows how to move to desired scroll position when the height is available.
## Change
If navigating backwards, initialize the final URI list with the previous result. It is almost always correct, and if not, will be corrected in the effects. This saves us one re-render when navigating backwards too.
## Issue
6467 Add status indicators for messages from creator, delegated moderator, global moderator
## Changes
- Added the required icons.
- Added tooltip.
## Notes
- Left out "creator" since we are already highlighting the creator's name.
- Note that currently the status is only available via websocket deltas. `comment.List` does not provide the data.
- When `comment.List` includes the info, regular comments will automatically include these badges.
* remove unused conditional
get stuff ready for merge
bugfix and cleanup
requested changes
fixing flow errors
fix last flow error and touchups
fiat and lbc tabs coming along
support setting currency as the default tab via query param
add wallet fiat balance
fixing naming
add fiat transactions
using es6 to populate data
should be fine but keeps crashing
transaction listing working
add no transactions thing
about to add a third tab
add third tab
add card last 4 to transaction history
some renaming
show payments successfully
show filler for subscriptions
display if no transactions or subs
working but in the wrong component
approaching something thats working
showing total tipped amount
about to add last couple features
cleanup
More touchups
adding last features
calculate the total amount of unique creators tipped
couple touchups
remove transaction listings from settings
add view transactions buttons
small optimization
add subscriptions section
fix lot of linting errors and make command more userful
* some copy changes
* about to add last couple changes
* update still require verification
* fix button spacing
* hide subscriptions sections and fix links
* cleanups before merging
* more cleanup
* cleanup with last four fix
* changing tab functionality
* bugfix and fix presentation of cards
* fix transactions bug
* change order and remove logs
* remove unused code in account
* more linter fixes
* update account balance presentation
* fix flow errors
(1) The GUI currently behaves such that if MinTip is set, MinSuper will be ineffective. However, Commentron actually checks MinSuper first. Just zero out MinSuper for now to enforce our desired behavior.
(2) Add debouncing to numerical settings. Refresh everything during onBlur to always reflect what's in server (e.g. in case there was an error).
To avoid calling `setting.Get` excessively, we'll fetch the latest settings one last time before sending a tip. We'll also fetch in several areas, like when a comment action fails (most likely creator just enforced a minimum).
This will be easier when websocket send an update.
## General
- `setting.List`: returns full creator settings. Requires signature (i.e. you own the channel)
- `setting.Get`: returns a public subset of the creator settings. No signature required, and it is mainly used by the GUI to determine the constraints of a channel (e.g. comments enabled? min tip requirements? etc.). Does not include private settings like "blocked words list".
`doFetchCreatorSettings` will handle both of these. Clients that uses the stashed results (`settingsByChannelId`) just needs to be aware the result might not contain everything, depending on whether you own the channel or not.
## Misc Related Changes
- Finally fix the reducer for COMMENT_FETCH_SETTINGS_COMPLETED to not purge the data on each call.
- Change `doFetchCreatorSettings` to operate on a single channel instead of multiple. We ended up not using the multple mode anyway, so it was wasteful code trying to batch the promises.
- `commentsDisabledChannelIds` is no longer needed. Previously, this was created just to differentiate between Creator (full) and Channel (subset) settings. It's cleaner to just use one object, so eliminated this.
- Remove unused 'commentingEnabled'.
## Aside
- There are now 2 ways to know if a channel has disabled comments: (1) from `comment.list` and `setting.Get|List`. Both of them updates `settingsByChannelId`, so it'll still be a single place for the GUI to check against.
## Issue
> 5459 Add setting for changing your comment server. Visible on desktop (and possibly defaulting to Odysee URL), hidden on odysee.
## Comments
Not sure how this would actually work properly without the user recompiling the app to handle server differences. For example, even when we use our own server but switch between v1 and v2, some code changes are need to handle the differences. At that point, it seems easier for the user to just change the .env file? Anyway...
## Changes
- Added Desktop-only options to define custom server. [Settings > Advanced Settings > "Comment server" section].
* fix frontend bug
* show superchats in order properly
* scroll properly when switching tabs
* calculate fiat tips properly
* sum up lbc amounts
* refactor code a bit remove why isnt this working bit
* bugfix cant tip fiat if no lbc balance
* add toast when someone does a tip for a comment
* add error toast for card page
* show error on account connection page
* automatically truncate to two decimals
* close to working perfectly
* show decimals value better
* increase size of input value
* one bug left but almost working perfectly
* reverse so newest transactions come first
* fixing bug caused by floating point precision
* eslint fixes
* remove unused conditional
* get stuff ready for merge
* bugfix and cleanup
* requested changes
* fixing flow errors
* fix last flow error and touchups
* fix i18n and remove logs
Co-authored-by: Anthony <contact@anthonymayfield.com>
* raw ingredients done adding functionality
* essentially working just need a cleanup
* almost working with a couple bugs
* almost working but a bug or two
* seems to be working well
* seems to be working well but needs a cleanup
* couple of bug fixes
* basically working now cleaning up
* seems to be working pretty well
* cleanup unnecessary changes
* eslint fixes
* bugfix seek event
* bugfix and andrey fix and better docs
* getting ready to add last piece of functionality
* handle seek events properly
* add dynamic duration to calculate interval properly
* fix lint errors
* last couple changes
* only run watchman with analytics on and on prod
* flow fixes
Co-authored-by: zeppi <jessopb@gmail.com>
## Issue
6832: Pass through commenting error if it fails current error list
## Changes
- Refactor the error-msg-replacing code to make it easier to add new ones in the future.
- Made the new error message localizable (i.e. extract the variable value, pass to `__()`)
- Fallback to Commentron original message for those unhandled ones (usually fresh messages from Commentron).
Renamed variables for clarity while at it.
"Item added to %name%" is probably redundant due to toast passing through <i18nMessage>, causing a double translation.
Anyway, added all the resolved string for now to avoid them popping up in app-string during development.
Previous:
~~Although it was collecting info for all platforms, the data is only sent for Odysee.~~ Correction: it became enabled for all platform after `master` became Odysee.
New:
Only send out the telemetry for `IS_WEB` or if there's user consent.
## Issue
6366 Recsys Evaluation Telemetry
The recommended list from lighthouse is obtained from `makeSelectRecommendedContentForUri`. This list is further tweaked by the GUI (e.g. move autoplay next item to top, remove blocked content, etc.). Recsys wants the final recommendation list and the clicked index (in exact order), so we need pass these info to the videojs recsys plugin somehow. Also, Recsys wants a recommendation list ID as well as the parent (referrer) ID, we so need to track the clicks and navigation.
## General Approach
- It seems easiest to just spew back the final (displayed) list and all the required info to Redux, and the recsys plugin (or anyone else in the future) can grab it.
- Try to touch few files as possible. The dirty work should all reside in `<RecommendedContent>` only.
## Changes
- `ClaimPreview`: add optional parameters to store an ID of the container that it is in (for this case, it is `ClaimList`) as well as the index within the container.
- When clicked, we store the container ID in the navigation history `state` object.
- For general cases, anyone can check this state from `history.location.state` to know which container referred/navigated to the current page. For the recsys use case, we can use this as the `parentUUID`.
- `ClaimList`: just relay `onClick` and set IDs.
- `RecommendedContent`: now handles the uuid generation (for both parent and child) and stores the data in Redux.
## Issue
6721 Notifications: Thumbnail for "new content" not showing up in Desktop layout
## Change
The `className` wasn't propagated during the `FileThumbnail` refactoring to `Thumbs`.
## Issue
In the Channel Page, if the _Collections_ `claim_search` comes in after the main content's `claim_search`, the Collection's `ChannelContent` is being re-rendered despite not being in the active Tab. This causes a 0.4 CLS score (it's ridiculous that invisible components are taken into account). Apparently 41% of users are hitting this scenario, causing a poor aggregate.
## Change
Don't mount the `ChannelContent` components unless its tab is the active one. It doesn't seem like Reach Tab hides components under the inactive tab.
No functional change; just thought this is cleaner (group up the constants) and easier to type via IDE auto-complete, at the expense of creating an extra object.
## Issue
Creating Settings suddenly start to stop loading correctly for some of my channels.
## Change
`settings.List` now returns null instead of empty array. Double-checked the Commentron repo and this is indeed the case.
Updated the code to handle null.
## Issue
Closes 6490
Embeds in https://lbry.com/news/2002dtf was crashing in incognito
## Change
Ensure localStorage is available before using it. Jessop warned me before...
## Issue
6068 Fix "Cumulative Layout Shift" for Core Web Vitals
In Posts, the Comments section appears first while we fetch the MD file. When the MD is fetched, Comments get pushed to the bottom (or shifted up for short posts), hence the red CLS scores.
## Approach
There are too many layers between `<FilePage>` and `<DocumentViewer>` to pass the `loading` state around to hide the Comments section, so just make Comments fade in after a 2s delay.
## Changes
- Posts: Add 2s fade-in delay to Comments.
- Posts: remove the gray placeholder. This improves the score a bit more, and reduces flicker as well. There's already a spinner from `FileRenderInline` to tell the user to be patient.
- Posts: add a minimum 30vh height so that short posts don't get collapsed too much, causing the `FileDetails` and Comments to shift. Small shifts are fine as long as CLS is below 0.1.
## Issue
6542 Livestream listing and blocked list kills CLS score
This is basically a repeat of what was done on `claimTileDiscover` (homepage), but now on `claimListDiscover` (category pages).
This handles the unnecessary re-render when:
- the uri list temporarily being zero while waiting for new claim-search results.
- livestream claim-search invalidating the list.
## Changes
Store the last uri list and use that when we know that claim-search is still not done.
## Tests
1. Ran Lighthouse on category pages (force a livestream channel on it). CLS score must be green.
2. Block `claim_search` from Dev Tools and move to another category. The page should say "timed out" instead of "no results" (i.e. maintain existing behavior).
## Issue
6589
## Notes
`parseURI` will return `isChannel=false` due to the reposted channel URL not having the '@' symbol.
Since we already have the claim object, check `value_type` directly instead.
Pop up Menu Fixes and Improvements
Improve re-directs
Fix file deletion
Improve code, and more
Fix List Layout collection popup
Allow to edit list
Fix blocking when not logged or no channel
Fix Edit and Delete showing for not owned Lists
Fix actions breaking when not logged in
Fix List options not showing
Lint
Shorten logic
Lint
Recently changed to `<OptimizedImg>`, which was assuming the `src` never changes.
dejavu ... we also hit this issue when implementing the `IntersectionObserver` lazy-loading.
Objective:
- Get appropriately sized images to improve performance and Core Vitals score.
- Ensure images using "objectFit=cover" doesn't get stretched out if the source is large enough.
- Peg to 100px increments for better caching.
Notes:
- Skip images hosted in '/public'. If we really want to optimize it, then we'll need to provide the full path in the code, otherwise CDN lookup will fail.
If there are no API errors but no reactions returned, consider the requested IDs as "done" and stop requesting again. When a channel is being confirmed, Commentron doesn't return the reaction object.
Also added extra guard in case Commentron does return an object in the future, but an empty one.
- use `selectActiveChannelClaim` as that takes the current channel list into account (i.e. correct state when all channels are deleted).
- `selectActiveChannelId` should probably be removed or not exposed through a selector, as it is not updated when channel list changes?
## Issue
6068
## Change
Lock all images to fit a 16:9 container. We have implemented 'ZoomableImg', so no reason in trying to display in full size.
This reduces CLS from 0.4xx to 0.01x.
## Flaws
CLS could probably be zero if not for the spinner shifting things slightly. Also, mobile CLS is 0.07.
The troublesome part in this PR is that FileRenderInitiator, FileRender and their subcomponents are broken apart and it's hard to synchronize their visibility and size. There are time gaps where none of them are visible, etc.
This PR only tackles the major part (most bang for buck), which is the elimination of variable height of the rendered image.
## Aside
I think `claimIsMine` is unused, so don't waste time requesting it.
show visible card and add remove card button
show your transactions even if you dont have a card
fix presentational issues
show your transactions even if you dont have a card
fix presentational issues
add link to channel section
update yarn
show donation location
add remove card modal still needs completion and also changed how stripe is used on settings stripe card page
add confirm remove card modal to router
move bank account stuff to settings page
move account functionality to settings page
continuing to move account transactions to settings
list transactions for creator
updating copy
touchup tip error
do a better job autofocusing
bugfix
show an error on the card page if api returns 500
building out frontend for comment tip
display dollar sign if its a fiat tip
more frontend work
more frontend work
more frontend bug fixes
working with hardcoded payment intent id
working but with one bug
bugfixed
add toast if payment fails
add add card button
cant get claim id but otherwise done
more frontend work
call is working
show fiat for livestream comments
add is fiat on comments
round and show values properly
dont allow review if tiperror
copy displaying properly
disable buttons conditionally properly
remove card button working
remove card working with a workaround by refreshing page
bugfix
send toast when tip on comment
jeremy frontend changes
only show cart on lbc
In the event that Commentron returned an empty object, we'll end up re-requesting the same IDs again. Haven't seens this happen before, but since we don't know what's causing the spike, we'll just consider failures and "fetched" to stop the loop.
User can always click Refresh to repopulate the values.
Not sure if this will ever occur, but technically possible from the code point of view. Try adding this to see if it stops the spikes in `reaction.list` calls.
Someone mentioned about odysee.com showing "tip" related text when supporting own claim. Now it should default to "Boost" related text for own claims.
L167: Not edited but not sure if "claimIsMine" is needed there any more.
add watch later hover action
replace watch later popup item for favorites
lint
styling for watch_later overlay
Add label
Use just claim, add requiresAuth
Add list icon
Tone down text
Turn WL Hover Button into component
Change WL hover icons
small revert
Keep watch later in the menu
## Issue
- `Comment.replies` currently represent all replies, while `comment.List` returns a filtered version, so the actual replies could be less.
- The actual replies is represented by `total_filtered_items`, but we only get that after making a fetch. So, users could click "Show more" but get nothing.
## Fix
- Stop showing "Show more" based on `total_filtered_items`.
- If there is a balance, display 1 dummy comment to represent all blocked replies. This handles the case of "Show more" being displayed but ended up with 0 replies if all replies were blocked.
## Future
Note that `Comment.replies` might be changed to represented filtered comments in the near future (refer to Beamer), so the GUI is made such that the dummy just won't appear when that change happens.
Seeing the spinner too much can be annoying.
- This approach works, but currently, when the list is very long, something is taking up resources and the handler couldn't be processed, so the effect is lost (still seeing the spinner). See 6473.
- Since we are now prefetching, bumped the debounceMs a bit.
## Issue
6414 <Don't use "exact match" setting outside of main search - cuases no results in related>
`doSearch` was used in Wunderbar and Recommended, but it was adding in Wunderbar options all the time.
## Changes
- Fix `doSearch` to not use hardcoded options (take from arguments).
- Refactors the searchOption-creation code so that we don't duplicate the logic in both .js and .jsx.
