Alternative to #10818, alternative solution to #10815.
After this change: All the AppInit steps before and inclusive
AppInitLockDataDirectory must not have Shutdown() called in case of
failure. Only when AppInitMain fails, Shutdown should be called.
Changes the GUI and bitcoind code to consistently do this.
This redefines dust to be the value of an output such that it would
cost that value in fees to (create and) spend the output at the dust
relay rate. The previous definition was that it would cost 1/3 of the
value. The default dust relay rate is correspondingly increased to
3000 sat/kB so the actual default dust output value of 546 satoshis
for a non-segwit output remains unchanged. This commit is a refactor
only unless a dustrelayfee is passed on the commandline in which case
that number now needs to be increased by a factor of 3 to get the same
behavior. -dustrelayfee is a hidden command line option.
Note: It's not exactly a refactor due to edge case changes in rounding
as evidenced by the required change to the unit test.
11590d3 Properly bound check conf_target in wallet RPC calls (Alex Morcos)
fd29d3d Remove checking of mempool min fee from estimateSmartFee. (Alex Morcos)
2fffaa9 Make QT fee displays use GetMinimumFee instead of estimateSmartFee (Alex Morcos)
1983ca6 Use CoinControl to pass custom fee setting from QT. (Alex Morcos)
03ee701 Refactor to use CoinControl in GetMinimumFee and FeeBumper (Alex Morcos)
ecd81df Make CoinControl a required argument to CreateTransaction (Alex Morcos)
Pull request description:
This builds on #10589 (first 5 commits from that PR, last 5 commits are new)
The first couple commits refactor to use the CCoinControl class to pass fee calculation parameters around.
This allows for fixing the buggy interaction in QT between the global payTxFee which can be modified by the RPC call settxfee or temporarily modified by the QT custom fee settings. Before these changes the GUI could sometimes send a transaction with a recently set payTxFee and not respect the settings displayed in the GUI. After these changes, using the GUI does not involve the global transaction confirm target or payTxFee.
The prospective fee displays in the smart fee slider and the coin control dialog are changed to use the fee calculation from GetMinimumFee, this simplifies the code and makes them slightly more correct in edge cases.
Maxing the fee calculation with the mempool min fee is move from estimateSmartFee to GetMinimumFee.
This fixes a long standing bug, and should be tagged for 0.15 as it is holding up finalizing the estimatesmartfee RPC API before release.
Tree-SHA512: 4d36a1bd5934aa62f3806d380fcafbef73e9fe5bdf190fc5259a3e3a13349e5ce796e50e7068c46dc630ccf56d061bce5804f0bfe2e082bb01ca725b63efd4c1
4c3b538 [logs] fix zapwallettxes startup logs (John Newbery)
e7a2181 [wallet] fix zapwallettxes interaction with persistent mempool (John Newbery)
ff7365e [tests] fix flake8 warnings in zapwallettxes.py (John Newbery)
Pull request description:
zapwallettxes previously did not interact well with persistent mempool.
zapwallettxes would cause wallet transactions to be zapped, but they
would then be reloaded from the mempool on startup. This commit softsets
persistmempool to false if zapwallettxes is enabled so transactions are
actually zapped.
This PR also fixes the zapwallettxes.py functional test, which did not properly test this feature. The test line:
```py
assert_raises(JSONRPCException, self.nodes[0].gettransaction, [txid3])
#there must be a expection because the unconfirmed wallettx0 must be gone by now
```
is not actually testing the presence of the transaction since the RPC is being called incorrectly (with an array instead of a string). The `assert_raises()` passes since an assert is raised, but it's not the one the test writer had in mind!
Fixes#9710 .
Tree-SHA512: e3236efc7a2fd2b3bf1d9e2e8a7726d470c57f5d95cf41b7bde264edc8817bd36a6f3feff52f8de8db0ef64b7247c88b24e7ff7cefaa706cba86fe4e2135a508
5618b7d Do not shadow upper local variable `state`. (Pavel Janík)
Pull request description:
Tests added in #10192 emit few shadowing warnings:
```
test/txvalidationcache_tests.cpp:268:26: warning: declaration shadows a local variable [-Wshadow]
test/txvalidationcache_tests.cpp:296:26: warning: declaration shadows a local variable [-Wshadow]
test/txvalidationcache_tests.cpp:357:26: warning: declaration shadows a local variable [-Wshadow]
```
Remove shadowing declarations and reuse the upper local declaration as in other already present test cases.
Tree-SHA512: 1e3c52cf963f8f33e729900c8ecdcd5cc6fe28caa441ba53c4636df9cc3d1a351ca231966d36384589f1340ae8ddd447424c2ee3e8527d334d0412f0d1a10c8f
6835cb0ab Avoid static analyzer warnings regarding uninitialized arguments (practicalswift)
Pull request description:
Avoid static analyzer warnings regarding _"Function call argument is a pointer to uninitialized value"_ in cases where we are intentionally using such arguments.
This is achieved by using `f(b.begin(), b.end())` (`std::array<char, N>`) instead of `f(b, b + N)` (`char b[N]`).
Rationale:
* Reduce false positives by guiding static analyzers regarding our intentions.
Before this commit:
```shell
$ clang-tidy-3.5 -checks=* src/bench/base58.cpp
bench/base58.cpp:23:9: warning: Function call argument is a pointer to uninitialized value [clang-analyzer-core.CallAndMessage]
EncodeBase58(b, b + 32);
^
$ clang-tidy-3.5 -checks=* src/bench/verify_script.cpp
bench/verify_script.cpp:59:5: warning: Function call argument is a pointer to uninitialized value [clang-analyzer-core.CallAndMessage]
key.Set(vchKey, vchKey + 32, false);
^
$
```
After this commit:
```shell
$ clang-tidy-3.5 -checks=* src/bench/base58.cpp
$ clang-tidy-3.5 -checks=* src/bench/verify_script.cpp
$
```
Tree-SHA512: 5814a320ca8b959d0954bb64393424bcad73f942d2e988de1cd6788f39153b93900325532f2e340de02d740a3953385d212ae08e7ec72bb4c394a40475f251df
d0413c670 Use range based for loop (René Nyffenegger)
Pull request description:
Instead of iterating over 0 .. 1 and then deciding on an actual desired
value, use a range based for loop for the desired value.
Tree-SHA512: 0a7a4a80516c9f16cf97fa7d257088b8386360e19b93c4deac3d745b6270ea452c513821686d7d14a159a235763e034f9b14eef222ca15f7eb71c37bd1c2c380
d40a72ccb Clarify *(--.end()) iterator semantics in CWallet::TopUpKeyPool (Matt Corallo)
28301b978 Meet code style on lines changed in the previous commit (Matt Corallo)
4a3fc3562 Track keypool entries as internal vs external in memory (Matt Corallo)
Pull request description:
This is an alternative version of #10184. As @jonasschnelli points out there, the performance regressions are pretty minimal, but given that this is a pretty simple, mechanical change, its probably worth doing.
Tree-SHA512: e83f9ebf2998f8164d1b2eebe5e6dcdeadea8c30b7612861f830758c08bf4093cd6a67b3bcfa9cfcb139e5e0b106fc8898a975fc69f334981aefc756568ab613
5c643241e [utils] allow square brackets for ipv6 addresses in bitcoin-cli (John Newbery)
fe4fabaf1 [refactor] move SplitHostPort() into utilstrencodings (John Newbery)
Pull request description:
bitcoin-cli's `-rpcconnect` can accept ipv6 addresses (as long as the libevent version is new enough), but fails to parse ipv6 with square brackets. This PR makes `bitcoin-cli` parse ipv6 in square brackets correctly.
`bitcoin-cli -rpcconnect=[::1] <command>`
should now be equivalent to
`bitcoin-cli -rpcconnect=::1 <command>`
This is useful so the `bitcoin-cli` option can now be in the same format as the `bitcoind` option.
Doesn't include tests. I have a branch that fully tests `bitcoin-cli`, but that's queued behind several intermediate PRs.
- first commit moves `SplitHostPort()` from libbitcoin_common into libbitcoin_util
- second commit adds proper ipv6 parsing to bitcoin-cli
Tree-SHA512: 249d409f10360c989474283341f458cc97364a56a7d004ae6d5f13d8bffe3a51b5dc2484d42218848e2d42cd9c0b13a1b92e94ea19b209f7e91c875c208d8409
0aadc11fd Avoid dereference-of-casted-pointer (Pieter Wuille)
Pull request description:
And prefer a static_cast to the intended reference type.
Tree-SHA512: e83b20023a4dca6029b46f7040a8a6fd54e1b42112ec0c87c3c3b567ed641de97a9e2335b57a2efb075491f641e5b977bc226a474276bea0c3c3c71d8d6ac54d
zapwallettxes previously did not interact well with persistent mempool.
zapwallettxes would cause wallet transactions to be zapped, but they
would then be reloaded from the mempool on startup. This commit softsets
persistmempool to false if zapwallettxes is enabled so transactions are
actually zapped.
228987d84 getbalance example covers at least 6 confirms (Gregory Sanders)
Tree-SHA512: 328d60b007ee75d809f4d28a7d9e5537d3c1446bd30c4c2ae57c690b8e83f6287cbcd3d8c955e8ba07ab62e27f9d27497c55219ff14fd5af7759dec465673fa2
Avoid static analyzer warnings regarding "Function call argument
is a pointer to uninitialized value" in cases where we are
intentionally using such arguments.
This is achieved by using ...
`f(b.begin(), b.end())` (`std::array<char, N>`)
... instead of ...
`f(b, b + N)` (`char b[N]`)
Rationale:
* Reduce false positives by guiding static analyzers regarding our
intentions.
Before this commit:
```
$ clang-tidy-3.5 -checks=* src/bench/base58.cpp
bench/base58.cpp:23:9: warning: Function call argument is a pointer to uninitialized value [clang-analyzer-core.CallAndMessage]
EncodeBase58(b, b + 32);
^
$ clang-tidy-3.5 -checks=* src/bench/verify_script.cpp
bench/verify_script.cpp:59:5: warning: Function call argument is a pointer to uninitialized value [clang-analyzer-core.CallAndMessage]
key.Set(vchKey, vchKey + 32, false);
^
$
```
After this commit:
```
$ clang-tidy-3.5 -checks=* src/bench/base58.cpp
$ clang-tidy-3.5 -checks=* src/bench/verify_script.cpp
$
```
This check has been moved to the wallet logic GetMinimumFee. The rpc call to
estimatesmartfee will now no longer return a result maxed with the mempool min
fee, but automated fee calculations from the wallet will produce the same result
as before and coincontrol and sendcoins dialogs in the GUI will correctly
display the right prospective fee.
changes to policy/fees.cpp include a big whitespace indentation change.
Remove helper function (CalculateEstimateType) for determining whether
estimates should be conservative or not, now that this is only called
once from GetMinimumFee and incorporate the logic directly there.
This fixes buggy behavior where we were temporarily setting and unsetting the
global payTxFee when trying to send a transaction with a custom fee from the
GUI. The previous behavior was inconsistent depending on the order of using the
RPC call settxfee and clicking various radio buttons in the sendcoinsdialog.
The new behavior is that transactions sent with the GUI will always use either
the smartfee slider value or the custom fee set on the GUI and they will not
affect the global defaults which are only for RPC and initial GUI values.
2aef1f182 [Qt] migrate old fee slider value to new dropbown Always round up (conservative) (Jonas Schnelli)
bc1be90e3 [Qt] replace fee slider with a Dropdown, extend conf. targets (Jonas Schnelli)
Tree-SHA512: 53796cf0b434dd3db5d4680dbeb6231a7df8f15d88187178fd4db8917cd7fc60091ce2c1589fd93668fc94bb13f989aba5b7ef3792fa95ee1f9f21a15709e2d3
dd97a529a Properly forbid -salvagewallet and -zapwallettxes for multi wallet. (Alex Morcos)
Tree-SHA512: dcde8f854ae957b4d3af4bcf1b811e0b6e9b93602764f86499e46a28d304cd4ee93ba058c03f6ca74ccb60e1310c83e53b698c64d93e5503115377655b80d44d
Warning from gcc 7.1 is ./prevector.h:450:25: warning:
'*((void*)(&<anonymous>)+8).prevector<28, unsigned char>::_union.prevector<28, unsigned char>::direct_or_indirect::<anonymous>.prevector<28, unsigned char>::direct_or_indirect::<unnamed struct>::indirect'
may be used uninitialized in this function [-Wmaybe-uninitialized]
Some people keep thinking that MAX_BLOCK_BASE_SIZE is a separate
size limit from the weight limit when it fact it is superfluous,
and used in early tests before the witness data has been
validated or just to compute worst case sizes. The size checks
that use it would not behave any differently consensus wise
if they were eliminated completely.
Its correct value is not independently settable but is a function
of the weight limit and weight formula.
This patch just eliminates it and uses the scale factor as
required to compute the worse case constants.
It also moves the weight factor out of primitives into consensus,
which is a more logical place for it.
18bacec6c Make check to distinguish between orphan txs and old txs more efficient. (Alex Morcos)
Tree-SHA512: b6b4bad89aa561975dce7b68b2fdad5623af5ebcb9c38fd6a72b5f6d0544ed441df4865591ac018f7ae0df9b5c60820cb4d9e55664f5667c9268458df70fd554
d34d77a build: verify that the assembler can handle crc32 functions (Cory Fields)
Pull request description:
Also, enable crc32 even if -msse4.2 wasn't added by us, as long as it works. This allows custom flags (such as -march=native) to work as expected.
Addresses #10670.
Tree-SHA512: e1a41a87b078d270bc645814315b229ad9c16556a4d14fb66b27a65b28d0caf9bf324f8c1e221854992aa17f53466eece06faebbf74d59b3d4ff2e6db6c614a4
69a4339ef missing white space in function arg (Lawrence Nahum)
Pull request description:
Tree-SHA512: 94d832eca0b5429cf48c7c1d4489942b53182c5b7ad9f24264867e7631301173c23a48f7b2e8fd22ff1b3137bafacb3f9d4320f4df235668c9096aaefff7afe8
959dd8781 Avoid printing incorrect block indexing time due to uninitialized variable (practicalswift)
Tree-SHA512: a76e43c3ffa734ed5c7eadf363f345f268aa0e6ce775aba8f856fe3bbc82f240dc7c734c5ca3ac500a12eb41fae00623413e79f484d5acf809b6e400851d771d
Adding comment to assert in PartialMerkleTree::CalcHash()
Adding comment on CMerkleBlock indicating it calls something that contains an assert
Removing EOL whitespace
Due to the iterative process of selecting new coins in each loop a new fee is
calculated that needs to be met each time. In the typical case if the most
recent iteration of the loop produced a much smaller transaction and we have now
gathered inputs with too many fees, we can just reduce the change. However in
the case where there is no change output, it is possible to end up with a
transaction which drastically overpays fees. This commit addresses that case,
by creating a change output if the overpayment is large enough to support it,
this is accomplished by rerunning the transaction creation loop without
selecting new coins.
Thanks to instagibbs for working on this as well
5e3b7b5 Improve error reporting for estimaterawfee (Alex Morcos)
1fafd70 Add function to report highest estimate target tracked per horizon (Alex Morcos)
9c85b91 Change API to estimaterawfee (Alex Morcos)
Tree-SHA512: e624c6e7967e9e48abe49f5818bd674e5710e571cc093029d2f90d39fdfba3c1f30e83bf89f6dce97052b59a7d9636a64642ccfb26effd149c417d0afbed0c0b
That OP_NOP10 is the last executable opcode is a bit of a obscure trivia, and the MAX_OPCODE constant already exists. This merely standardizes use of MAX_OPCODE over OP_NOP10 where it makes sense and is more clear.
1f668b6 Expose if CScheduler is being serviced, assert its not in EmptyQueue (Matt Corallo)
3192975 Flush CValidationInterface callbacks prior to destruction (Matt Corallo)
08096bb Support more than one CScheduler thread for serial clients (Matt Corallo)
2fbf2db Add default arg to CScheduler to schedule() a callback now (Matt Corallo)
cda1429 Give CMainSignals a reference to the global scheduler (Matt Corallo)
3a19fed Make ValidationInterface signals-type-agnostic (Matt Corallo)
ff6a834 Use TestingSetup to DRY qt rpcnestedtests (Matt Corallo)
Tree-SHA512: fab91e34e30b080ed4d0a6d8c1214910e383c45440676e37be61d0bde6ae98d61e8903d22b846e95ba4e73a6ce788798350266feba246d8a2ab357e8523e4ac5
Add support for setting each of these attributes on a per RPC call basis to sendtoaddress, sendmany, fundrawtransaction (already had RBF), and bumpfee (already had RBF and conf target).
Note that the CScheduler thread cant be running at this point,
it has already been stopped with the rest of the init threadgroup.
Thus, just calling any remaining loose callbacks during Shutdown()
is sane.
This will be used by CValidationInterface soon.
This requires a bit of work as we need to ensure that most of our
callbacks happen in-order (to avoid synchronization issues in
wallet) - we keep our own internal queue and push things onto it,
scheduling a queue-draining function immediately upon new
callbacks.
9bbf600 Use method name from __func__ macro (darksh1ne)
Tree-SHA512: da6d0714f458b538189bbc2b53252ba353dcc1ef15fa780cb7f690a034b58ab0dbaa3a89f83f044c746241ee265a70fc092449f1cc7be4f190775423fbca5fc5
GetMinimumFee now passes the conservative argument into estimateSmartFee.
Call CalculateEstimateType(mode) before calling GetMinimumFee or estimateSmartFee to determine the value of this argument.
CCoinControl can now be used to control this mode.
73c942e Use "replaceable" instead of "rbfoptin" in bitcoin-tx. (Matt Corallo)
fb915d5 Use "replaceable" instead of "optIntoRbf" in fundrawtransaction. (Matt Corallo)
928c681 Use "replaceable" instead of "optintorbf" in createrawtransaction. (Matt Corallo)
Tree-SHA512: 8922451c00abb63aaa08b4a9e314e89c22233b32f207259fbc25367f7d5b67efbaccc7e2a4958c18611ad498da302296242860c7be965a0e996dcde3e89efa07
Use __func__ macro in std::runtime_exception to:
1. fix method name in CWalletTx::GetAvailableWatchOnlyCredit()
2. refactor CWalletTx::GetAvailableCredit()
(by hiding boost::signals stuff in the .cpp)
This allows us to give it a bit more intelligence as we move
forward, including routing some signals through CScheduler. While
the introduction of a "internals" pointer in the class is pretty
ugly, the fact that we no longer need to include boost/signals
directly from validationinterface.h is very much worth the loss.
ecb4fc382 fix typo in help text for removeprunedfunds (Akio Nakamura)
Tree-SHA512: 2603851f1ac90bc0b90ced6355b0056e4cb658303cb2cd03ee0827ed0053157ebb87de48076f4d4f556991bfdbdb65d0a68a8dbd275c501cee4c9b5746a9562b
2a96283 rpc: Update `generate` for developer notes (Wladimir J. van der Laan)
df7e2f0 rpc: Move the `generate` RPC call to rpcwallet (Wladimir J. van der Laan)
Tree-SHA512: ec658d6178f8435dc54b9d9c6dd59f873055a8ae0c3f177c02049d77b93107dd5fc17a1ff56d50f051810d52fdf306846eaba2ef4fc8d2a6cfa831f57a1045c4
Fixes:
init.cpp: In function ‘bool AppInitMain(boost::thread_group&, CScheduler&)’:
init.cpp:1499:56: warning: ‘nStart’ may be used uninitialized in this function [-Wmaybe-uninitialized]
LogPrintf(" block index %15dms\n", GetTimeMillis() - nStart);
^
542ce6e Report [CANCELLED] instead of [DONE] when shut down during txdb upgrade (Jonas Schnelli)
83fbea3 Report txdb upgrade not more often then every 10% (Jonas Schnelli)
06c5b6e Show txdb upgrade progress in debug log (Jonas Schnelli)
316fcb5 Allow to cancel the txdb upgrade via splashscreen callback (Jonas Schnelli)
ae09d45 Allow to shut down during txdb upgrade (Jonas Schnelli)
00cb69b [Qt] allow to execute a callback during splashscreen progress (Jonas Schnelli)
Tree-SHA512: 23190f23f441bfd60821e49f8b3698a6bef97eb0e0ee659328e4a7395769ecd1616420eacc38aa1fa0ff62b9de5f13a0098dc798cdec6bff649575cefebc0db2
This makes it possible to mine to any wallet when multi-wallet mode is added.
Solves the same problem as #10649, but IMO in a cleaner way.
It also gets rid of the circuitous `ScriptForMining` method on
`CValidationInterface`, which really doesn't belong there.
After this change it's still possible to mine without wallet through
`generatetoaddress`.
176c021 [qa] Test non-atomic chainstate writes (Suhas Daftuar)
d6af06d Dont create pcoinsTip until after ReplayBlocks. (Matt Corallo)
eaca1b7 Random db flush crash simulator (Pieter Wuille)
0580ee0 Adapt memory usage estimation for flushing (Pieter Wuille)
013a56a Non-atomic flushing using the blockchain as replay journal (Pieter Wuille)
b3a279c [MOVEONLY] Move LastCommonAncestor to chain (Pieter Wuille)
Tree-SHA512: 47ccc62303f9075c44d2a914be75bd6969ff881a857a2ff1227f05ec7def6f4c71c46680c5a28cb150c814999526797dc05cf2701fde1369c06169f46eccddee
aa95947 Use the override specifier (C++11) where we expect to be overriding the virtual function of a base class (practicalswift)
Tree-SHA512: 3835e9b4ceaa4b2db485a25dfa3e5fe50c2e3ecb22ca9d5331aed7728aa496d4378fb84c0a1a3c47b0adecc10a00bca99cc239cbaf94cf2ce5b4cda497db6023
Check that cached script execution results are only valid for the same
script flags; that script execution checks are returned for non-cached
transactions; and that cached results are only valid for transactions
with the same witness hash.
Checking for the existence in the CCoinsViewCache of the outputs of a new tx
will result in a disk hit for every output since they will not be found. On the
other hand if those outputs exist already, then the inputs must also have been
missing, so we can move this check inside the input existence check so in the
common case of a new tx it doesn't need to run.
The purpose of the check is to avoid spamming the orphanMap with slightly old
txs which we have already seen in a block, but it is already only optimistic
(depending on the outputs not being spent), so make it even more efficient by
only checking the cache and not the entire pcoinsTip.
c074752 [RPC] Add an uptime command that displays the amount of time that bitcoind has been running (Ricardo Velhote)
Tree-SHA512: 8f59d4205042885f23f5b87a0eae0f5d386e9c6134e5324598e7ee304728d4275f383cd154bf1fb25350f5a88cc0ed9f97edb099e9b50c4a0ba72d63ec5ca5b4
This removes the possibility for GetCoin/HaveCoin/HaveCoinInCache to return
true while the respective coin is spent. By doing it across all calls, some
extra checks can be eliminated.
coins_tests is modified to call HaveCoin sometimes before and sometimes
after AccessCoin. A further change is needed because the semantics for
GetCoin slightly changed, causing a pruned entry in the parent cache to not
be pulled into the child in FetchCoin.
Adds new functional test, dbcrash.py, which uses -dbcrashratio to exercise the
logic for recovering from a crash during chainstate flush.
dbcrash.py is added to the extended tests, as it may take ~10 minutes to run
Use _Exit() instead of exit() for crash simulation
This eliminates stderr output such as:
terminate called without an active exception
or
Assertion failed: (!pthread_mutex_destroy(&m)), function ~recursive_mutex, file /usr/local/include/boost/thread/pthread/recursive_mutex.hpp, line 104.
Eliminating the stderr output on crash simulation allows testing with
test_runner.py, which reports a test as failed if stderr is produced.
This requires that we not access pcoinsTip in InitBlockIndex's
FlushStateToDisk (so we just skip it until later in AppInitMain)
and the LoadChainTip in LoadBlockIndex (which there is already one
later in AppinitMain, after ReplayBlocks, so skipping it there is
fine).
Includes some simplifications by Suhas Daftuar and Pieter Wuille.
5257698 Change semantics of HaveCoinInCache to match HaveCoin (Alex Morcos)
Tree-SHA512: 397e9ba28646b81fffa53e55064735d4d242aaffdf8484506825f785b0e414f334e4c5cd1e4e1dd9a4b6d1f6954c7ecad15429934a1c4e8d39f596cbd9f5dd80
5a9b508 [trivial] Add end of namespace comments (practicalswift)
Tree-SHA512: 92b0fcae4d1d3f4da9e97569ae84ef2d6e09625a5815cd0e5f0eb6dd2ecba9852fa85c184c5ae9de5117050330ce995e9867b451fa8cd5512169025990541a2b
deaf48b Handle TIMESTAMP_WINDOW within CWallet::RescanFromTime (Russell Yanofsky)
5b2be2b Make CWallet::RescanFromTime comment less ambiguous (Russell Yanofsky)
9bb66ab Add RescanFromTime method and use from rpcdump (Russell Yanofsky)
ccf84bb Move birthday optimization out of ScanForWalletTransactions (Russell Yanofsky)
Tree-SHA512: cd38433b8f5c5e44ecfba830a6a26bd9a9d0f4a22ae42bce17773d1a6fb25e1ee4289484996dad2d7acfa03059917ff062459f25030a761da7083ba5fbc87bc9
1887337 Add a comment explaining the use of MAX_BLOCK_BASE_SIZE. (Gregory Maxwell)
Tree-SHA512: 4c643a3696241fbf4eac8d58bb26586f319338b28ee86d20394a8ea362911b467853eb40c43487ede753209a3c7bee2e576d2ca80627e9fc924fabefbcaea34b
c1be285 chainparams: make supported service bits option explicit (Cory Fields)
d5c7c1c net: use an internal address for fixed seeds (Cory Fields)
6cdc488 net: switch to dummy internal ip for dns seed source (Cory Fields)
6d0bd5b net: do not allow resolving to an internal address (Cory Fields)
7f31762 net: add an internal subnet for representing unresolved hostnames (Cory Fields)
Tree-SHA512: 9bf1042bef546ac3ef0e0d3a9a5555eb21628ff2674a0cf8c6367194b22bfdab477adf452c0e7c56f44e0fb37debc5e14bdb623452e076fb9c492c7702601d7a
dd869c6 Add an explanation of quickly hashing onto a non-power of two range. (Gregory Maxwell)
Tree-SHA512: 8b362e396206a4ee2e825908dcff6fe4525c12b9c85a6e6ed809d75f03d42edcfba5e460a002e5d17cc70c103792f84d99693563b638057e4e97946dd1d800b2
d5711f4 Filter subtrees and and benchmarks from coverage report (Andrew Chow)
405b86a Replace lcov -r commands with faster way (Andrew Chow)
c8914b9 Have `make cov` optionally include branch coverage statistics (Andrew Chow)
Tree-SHA512: 9c349a7baeb7430ea586617c52f91177df58e3546d6dc573e26815ddb79e30ab1873542d85ac1daca5e1fb2c6d6c8965824b42d027b6b0496a744af57b095852
cf68a48 Deduplicate addrdb.cpp and use CHashWriter/Verifier (Pieter Wuille)
Tree-SHA512: 0301332e797f64da3a1588c9ebaf533af58da41e38f8a64206bff20102c5e82c2a7c630ca3150cf451b2ccf4acb3dd45e44259b6ba15e92786e9e9a2b225bd2f
1ae86ec Changed event RAII helper functions to inline to deal with duplicate symbol linker errors. (Karl-Johan Alm)
fd369d2 Switched httpserver.cpp to use RAII wrapped libevents. (Kalle Alm)
Tree-SHA512: 877e431f211024d42a3b0800e860e02833398611433e8393f8d5d4970f47f4bd670b900443678c067fec110c087aaab7dc1981ccbf17f6057676fdbbda89aed9
6171826 Don't create change at the dust limit, even if it means paying more than expected (Alex Morcos)
Tree-SHA512: d4cf939b97a92d63d4703ad152093c9dc60e74af590697bc21adbcdf17fc9e6ffb37d46d5eefafbd69327d1bcb79911f1b826ce1d960d895d464c4408c4995c3
This wraps CheckInputs in ATMP's cache-inputs call to check that
each scriptPubKey the CCoinsViewCache provides is the one which
was committed to by the input's transaction hash.
A few "a->an" and "an->a".
"Shows, if the supplied default SOCKS5 proxy" -> "Shows if the supplied default SOCKS5 proxy". Change made on 3 occurrences.
"without fully understanding the ramification of a command" -> "without fully understanding the ramifications of a command".
Removed duplicate words such as "the the".
e5c6168 Fix instantiation and array accesses in class base_uint<BITS> (Pavlos Antoniou)
Tree-SHA512: e4d39510d776c5ae8814cd5fb5c5d183cd8da937e339bff95caff68a84492fbec68bf513c5a6267446a564d39093e0c7fc703c645b511caab80f7baf7955b804
9417d7a33 Be much more agressive in AccessCoin docs. (Matt Corallo)
f58349ca8 Restore some assert semantics in sigop cost calculations (Matt Corallo)
3533fb4d3 Return a bool in SpendCoin to restore pre-per-utxo assert semantics (Matt Corallo)
ec1271f2b Remove useless mapNextTx lookup in CTxMemPool::TrimToSize. (Matt Corallo)
Tree-SHA512: 158a4bce063eac93e1d50709500a10a7cb1fb3271f10ed445d701852fce713e2bf0da3456088e530ab005f194ef4a2adf0c7cb23226b160cecb37a79561f29ca
d9bec888f Use REJECT_DUPLICATE for already known and conflicted txn (Pieter Wuille)
Tree-SHA512: adc6dc5caed731c3fd5c8784e8820a074e320360cdb5579c5b9299f9799dd99de60b7382d336ab1909dab8b23e744456d78aa0c3b1c8dd1af3d1b779314cf8fa
131a8ceb7 Make clang-format use C++11 features (e.g. A<A<int>> instead of A<A<int> >) (practicalswift)
Tree-SHA512: e3c0ee683b654eae638deb41c52cf3187fa958dc5fa67778eaf8a83946b63f5b1d24c47bb965eaa910e3fcdcaf9eebf461eb3fc8e3a73ebaf03c7904521fda00
rbx needs to be stashed in a 64bit register on 64bit platforms. With this crash
in particular, it was holding a stack canary which was not properly restored
after the cpuid.
Split out the x86+PIC case so that x86_64 doesn't have to worry about it.
Part of a series of changes to clean up the instantiation of connman
by decoupling the command line arguments.
We also now abort with an error when explicit binds are set with
-listen=0.
e9cd778 Pass in smart fee slider value to coin control dialog (Alex Morcos)
Tree-SHA512: 3899c3eb89b06e9cc842b33fabcce40a84fcc3a88ac2b02861f63419925312ac2a9f632567c02b0a060f5c5cd55f337e35e99b80535d1c1b8fcb7fd0c539f3c0
In order to prevent mixups, our internal range is never allowed as a resolve
result. This means that no user-provided string will ever be confused with an
internal address.
We currently do two resolves for dns seeds: one for the results, and one to
serve in addrman as the source for those addresses.
There's no requirement that the source hostname resolves to the stored
identifier, only that the mapping is unique. So rather than incurring the
second lookup, combine a private subnet with a hash of the hostname.
The resulting v6 ip is guaranteed not to be publicy routable, and has only a
negligible chance of colliding with a user's internal network (which would be
of no consequence anyway).
Since cfe77ef41 the global nTxConfirmTarget wasn't being updated by the smart
fee slider and thus the coin control dialog and labels were not being updated.
6294f32 gettxoutproof() should return consistent result (John Newbery)
Tree-SHA512: 1c36f78ea07a3bdde09e9494207b4372d54bcd94ed2d56e339e78281f6693e26a93e4c3123453d5c0f6e994d0069d5a1c806786c4af71864f87ea4841611c379
cb24c85 Use rdrand as entropy source on supported platforms (Pieter Wuille)
Tree-SHA512: c42eaa01a14e6bc097c70b6bf8540d61854c2f76cb32be69c2a3c411a126f7b4bf4a4486e4493c4cc367cc689319abde0d4adb799d29a54fd3e81767ce0766fc
Use case: TryCreateDirectory(GetDataDir() / "blocks" / "index") would
fail if the blocks directory was not explicitly created before.
The line that did so was in a weird location and could be removed as a
result.
bf376eacc Return early in IsBanned. (Gregory Maxwell)
Tree-SHA512: d8ed4aaf9a7523b00effa4ac17cec3be1ec1f5c5ce64d89833fbc8f3d73d13b022043354fbcf2682b2af05070d115e1fc0cc0b122197e9ddee5959c3fb9dd16d
In Olaoluwa Osuntokun's recent protocol proposal they were using a
mod in an inner loop. I wanted to suggest a normative protocol
change to use the trick we use here, but to find an explanation
of it I had to dig up the PR on github. After I posted about it
several other developers commented that it was very interesting
and they were unaware of it.
I think ideally the code should be self documenting and help
educate other contributors about non-obvious techniques that
we use. So I've written a description of the technique with
citations for future reference.
3ff1fa8 Use override keyword on CCoinsView overrides (Russell Yanofsky)
24e44c3 Don't return stale data from CCoinsViewCache::Cursor() (Russell Yanofsky)
Tree-SHA512: 08699dae0925ffb9c018f02612ac6b7eaf73ec331e2f4f934f1fe25a2ce120735fa38596926e924897c203f7470e99f0a99cf70d2ce31ff428b105e16583a861
c237bd7 wallet: Update formatting (Luke Dashjr)
9cbe8c8 wallet: Forbid -salvagewallet, -zapwallettxes, and -upgradewallet with multiple wallets (Luke Dashjr)
a2a5f3f wallet: Base backup filenames on original wallet filename (Luke Dashjr)
b823a4c wallet: Include actual backup filename in recovery warning message (Luke Dashjr)
84dcb45 Bugfix: wallet: Fix warningStr, errorStr argument order (Luke Dashjr)
008c360 Wallet: Move multiwallet sanity checks to CWallet::Verify, and do other checks on all wallets (Luke Dashjr)
0f08575 Wallet: Support loading multiple wallets if -wallet used more than once (Luke Dashjr)
b124cf0 Wallet: Replace pwalletMain with a vector of wallet pointers (Luke Dashjr)
19b3648 CWalletDB: Store the update counter per wallet (Luke Dashjr)
74e8738 Bugfix: ForceSetArg should replace entr(ies) in mapMultiArgs, not append (Luke Dashjr)
23fb9ad wallet: Move nAccountingEntryNumber from static/global to CWallet (Luke Dashjr)
9d15d55 Bugfix: wallet: Increment "update counter" when modifying account stuff (Luke Dashjr)
f28eb80 Bugfix: wallet: Increment "update counter" only after actually making the applicable db changes to avoid potential races (Luke Dashjr)
Tree-SHA512: 23f5dda58477307bc07997010740f1dc729164cdddefd2f9a2c9c7a877111eb1516d3e2ad4f9b104621f0b7f17369c69fcef13d28b85cb6c01d35f09a8845f23
40796e1 Remove references to priority that snuck back in in 870824e9. (Matt Corallo)
Tree-SHA512: fd6f772a9fdf14b3b125e84a79059d7ab34b3571b35dc48f8d4b9f22ea71c6cdd4ae88c2e135ae317a16744c28dd23cf7f7dd88ea9d8b2d408e57845ef87d03b
While the current implementation is pretty free, there is a lot
of possibility for this to blow up in our face with future changes,
especially as the backing map gets tweaked.
There are some similar asserts which are left removed in policy
and ATMP (policy code being broken isn't a huge deal, but if we
fail to verify some consensus rules, we should most definitely
crash).
Previously it was possible for HaveCoinInCache to return true for a spent
coin. It is more clear to keep the semantics the same. HaveCoinInCache is
used for two reasons:
- tracking coins we may want to uncache, in which case it is unlikely there
would be spent coins we could uncache (not dirty)
- optimistically checking whether we have already included a tx in the
blockchain, in which case a spent coin is not a reliable indicator that we have.
3fb81a8 Use list initialization (C++11) for maps/vectors instead of boost::assign::map_list_of/list_of (practicalswift)
Tree-SHA512: 63a9ac9ec5799472943dce1cd92a4b14e7f1fe12758a5fc4b1efceaf2c85a4ba71dad5ccc50813527f18b192e7714c076e2478ecd6ca0d452b24e88416f872f7
246a02f Use std::unordered_{map,set} (C++11) instead of boost::unordered_{map,set} (practicalswift)
Tree-SHA512: 35cd42012248174751e4b87efbc78689957f731d7710dea7e369974c6ec31b15b32d1537fb0d875c94c7ffb5046d9784735e218e5baeed96d525861dab6d4252
227ae9b [tests] Use FastRandomContext instead of boost::random::{mt19937,uniform_int_distribution} (practicalswift)
Tree-SHA512: 1bde6c8b9498051fa2eae4913eb1f5411adea8dea1511c0df859aea57a2a7db6f5839945ddf2eccdddfa322bceacad35a5d875742db7d15e40dbea83185307bb
e94584858 scripted-diff: Use new naming style for insecure_rand* functions (Pieter Wuille)
2fcd9cc86 scripted-diff: Use randbits/bool instead of randrange where possible (Pieter Wuille)
2ada67852 Use randbits instead of ad-hoc emulation in prevector tests (Pieter Wuille)
5f0b04eed Replace rand() & ((1 << N) - 1) with randbits(N) (Pieter Wuille)
3ecabae36 Replace more rand() % NUM by randranges (Pieter Wuille)
efee1db21 scripted-diff: use insecure_rand256/randrange more (Pieter Wuille)
1119927df Add various insecure_rand wrappers for tests (Pieter Wuille)
124d13a58 Merge test_random.h into test_bitcoin.h (Pieter Wuille)
90620d66c scripted-diff: Rename cuckoo tests' local rand context (Pieter Wuille)
37e864eb9 Add FastRandomContext::rand256() and ::randbytes() (Pieter Wuille)
Tree-SHA512: d09705a3ec718ae792f7d66a75401903ba7b9c9d3fc36669d6e3b9242f0194738106be26baefc8a8e3fa6df7c9a35978c71c0c430278a028b331df23a3ea3070
We can call gettxoutproof() with a list of transactions. Currently, if
the first transaction is unspent (and all other transactions are in the
same block), then the call will succeed. If the first transaction has
been spent, then the call will fail. The means that the following two
calls will return different results:
gettxoutproof(unspent_tx1, spent_tx1)
gettxoutproof(spent_tx1, unspent_tx1)
This commit makes behaviour independent of transaction ordering by looping
through all transactions provided and trying to find which block they're in.
This commit also increases the test coverage and tests more failure
cases for gettxoutproof()
Added an option to configure to allow for branch coverage statistics gathering.
Disabled logprint macro when coverage testing is on so that unnecessary branches are not analyzed.
The implementation of base_uint::operator++(int) and base_uint::operator--(int) is now safer.
Array pn is accessed via index i after bounds checking has been performed on the index, rather than before.
The logic of the while loops has also been made more clear.
A compile time assertion has been added in the class constructors to ensure that BITS is a positive multiple of 32.
CCoinsViewCache doesn't actually support cursor iteration returning the
current contents of the cache, so raise an error when the cursor method is
called instead of returning a cursor that iterates over stale data.
Also update the gettxoutsetinfo RPC which was relying on the old behavior to be
explicit about which view it is returning data about.
This adds a new CuckooCache in validation, caching whether all of a
transaction's scripts were valid with a given set of script flags.
Unlike previous attempts at caching an entire transaction's
validity, which have nearly universally introduced consensus
failures, this only caches the validity of a transaction's
scriptSigs. As these are pure functions of the transaction and
data it commits to, this should be much safer.
This is somewhat duplicative with the sigcache, as entries in the
new cache will also have several entries in the sigcache. However,
the sigcache is kept both as ATMP relies on it and because it
prevents malleability-based DoS attacks on the new higher-level
cache. Instead, the -sigcachesize option is re-used - cutting the
sigcache size in half and using the newly freed memory for the
script execution cache.
Transactions which match the script execution cache never even have
entries in the script check thread's workqueue created.
Note that the cache is indexed only on the script execution flags
and the transaction's witness hash. While this is sufficient to
make the CScriptCheck() calls pure functions, this introduces
dependancies on the mempool calculating things such as the
PrecomputedTransactionData object, filling the CCoinsViewCache, etc
in the exact same way as ConnectBlock. I belive this is a reasonable
assumption, but should be noted carefully.
In a rather naive benchmark (reindex-chainstate up to block 284k
with cuckoocache always returning true for contains(),
-assumevalid=0 and a very large dbcache), this connected blocks
~1.7x faster.
9a5a1d7 RPC/rawtransaction: createrawtransaction: Check opt_into_rbf when provided with either value (Luke Dashjr)
23b0fe3 bitcoin-tx: rbfoptin: Avoid touching nSequence if the value is already opting in (Luke Dashjr)
b005bf2 Introduce MAX_BIP125_RBF_SEQUENCE constant (Luke Dashjr)
575cde4 [bitcoin-tx] add rbfoptin command (Jonas Schnelli)
5d26244 [Tests] extend the replace-by-fee test to cover RPC rawtx features (Jonas Schnelli)
36bcab2 RPC/Wallet: Add RBF support for fundrawtransaction (Luke Dashjr)
891c5ee Wallet: Refactor FundTransaction to accept parameters via CCoinControl (Luke Dashjr)
578ec80 RPC: rawtransaction: Add RBF support for createrawtransaction (Luke Dashjr)
Tree-SHA512: 446e37c617c188cc3b3fd1e2841c98eda6f4869e71cb3249c4a9e54002607d0f1e6bef92187f7894d4e0746ab449cfee89be9f6a1a8831e25c70cf912eac1570
656dbd871 Perform member initialization in initialization lists where possible (practicalswift)
Tree-SHA512: 048380f4da23ab1eaaf471801a01dbd76f2235afb686c1489b30a6bac109195134afc83414b8378d3482a9042d537ec62d30136dadb9347cf06b07fb5c693208
8ad5bde Merge bctest.py into bitcoin-util-test.py (John Newbery)
95836c5 Use shared config file for functional and util tests (John Newbery)
89fcd35 Use an .ini config file for environment vars in bitcoin-util-test.py (John Newbery)
e9265df Change help_text in bitcoin-util-test.py to a docstring. (John Newbery)
ce58e93 Change bitcoin-util-test.py to use Python3 (John Newbery)
Tree-SHA512: 66dab0b4a8546aee0dfaef134a165f1447aff4c0ec335754bbc7d9e55909721c62f09cdbf4b22d02ac1fcd5a9b66780f91e1cc4d8687fae7288cc9072a23a78f
Prior to per-utxo CCoins, we checked that no other in-mempool tx
spent any of the given transaction's outputs, as we don't want to
uncache that entire tx in such a case. However, we now are checking
only that there exists no other mempool spends of the same output,
which should clearly be impossible after we removed the transaction
which was spending said output (barring massive mempool
inconsistency).
Thanks to @sdaftuar for the suggestion.
At startup, we choose one peer to serve us the headers chain, until
our best header is close to caught up. Disconnect this peer if more
than 15 minutes + 1ms/expected_header passes and our best header
is still more than 1 day away from current time.
This change has no effect on wallet behavior.
On wallet startup, the transaction scan avoids reading any blocks with
timestamps older than the wallet birthday (less than nTimeFirstKey -
TIMESTAMP_WINDOW). This block skipping code currently resides in
CWallet::ScanForWalletTransactions but it doesn't really belong there because
it makes the implementation unnecessarily fragile and hard to understand, and
it never has any effect except at startup (because all other callers do their
rescans based on timestamps other than, but always greater or equal to,
nTimeFirstKey).
This adds the listening address on which incoming connections were received to the
CNode and CNodeStats structures.
The address is reported in `getpeerinfo`.
This can be useful for distinguishing connections received on different listening ports
(e.g. when using a different listening port for Tor hidden service connections)
or different networks.
8906a9a0d Fix bumpfee test after #10449 (Russell Yanofsky)
Tree-SHA512: 0838c7696499baf0fb5ee6edf0b081752d6c37578360a7f24a7e9c700598cbc14ff95826f2f5124cca805d2609470a052bc7309211874b13be7ac1ff9e911a34
589827975 scripted-diff: various renames for per-utxo consistency (Pieter Wuille)
a5e02bc7f Increase travis unit test timeout (Pieter Wuille)
73de2c1ff Rename CCoinsCacheEntry::coins to coin (Pieter Wuille)
119e552f7 Merge CCoinsViewCache's GetOutputFor and AccessCoin (Pieter Wuille)
580b02309 [MOVEONLY] Move old CCoins class to txdb.cpp (Pieter Wuille)
8b25d2c0c Upgrade from per-tx database to per-txout (Pieter Wuille)
b2af357f3 Reduce reserved memory space for flushing (Pieter Wuille)
41aa5b79a Pack Coin more tightly (Pieter Wuille)
97072d668 Remove unused CCoins methods (Pieter Wuille)
ce23efaa5 Extend coins_tests (Pieter Wuille)
508307968 Switch CCoinsView and chainstate db from per-txid to per-txout (Pieter Wuille)
4ec0d9e79 Refactor GetUTXOStats in preparation for per-COutPoint iteration (Pieter Wuille)
13870b56f Replace CCoins-based CTxMemPool::pruneSpent with isSpent (Pieter Wuille)
05293f3cb Remove ModifyCoins/ModifyNewCoins (Pieter Wuille)
961e48397 Switch tests from ModifyCoins to AddCoin/SpendCoin (Pieter Wuille)
8b3868c1b Switch CScriptCheck to use Coin instead of CCoins (Pieter Wuille)
c87b957a3 Only pass things committed to by tx's witness hash to CScriptCheck (Matt Corallo)
f68cdfe92 Switch from per-tx to per-txout CCoinsViewCache methods in some places (Pieter Wuille)
000391132 Introduce new per-txout CCoinsViewCache functions (Pieter Wuille)
bd83111a0 Optimization: Coin&& to ApplyTxInUndo (Pieter Wuille)
cb2c7fdac Replace CTxInUndo with Coin (Pieter Wuille)
422634e2f Introduce Coin, a single unspent output (Pieter Wuille)
7d991b55d Store/allow tx metadata in all undo records (Pieter Wuille)
c3aa0c119 Report on-disk size in gettxoutsetinfo (Pieter Wuille)
d34242430 Remove/ignore tx version in utxo and undo (Pieter Wuille)
7e0032290 Add specialization of SipHash for 256 + 32 bit data (Pieter Wuille)
e484652fc Introduce CHashVerifier to hash read data (Pieter Wuille)
f54580e7e error() in disconnect for disk corruption, not inconsistency (Pieter Wuille)
e66dbde6d Add SizeEstimate to CDBBatch (Pieter Wuille)
Tree-SHA512: ce1fb1e40c77d38915cd02189fab7a8b125c7f44d425c85579d872c3bede3a437760997907c99d7b3017ced1c2de54b2ac7223d99d83a6658fe5ef61edef1de3
As the maximum amount of data that can be pulled into the cache due to
a block validation is much lower now (at most one CCoin entry per input
and per output), reduce the conservative estimate used to determine
flushing time.
This patch makes several related changes:
* Changes the CCoinsView virtual methods (GetCoins, HaveCoins, ...)
to be COutPoint/Coin-based rather than txid/CCoins-based.
* Changes the chainstate db to a new incompatible format that is also
COutPoint/Coin based.
* Implements reconstruction code for hash_serialized_2.
* Adapts the coins_tests unit tests (thanks to Russell Yanofsky).
A side effect of the new CCoinsView model is that we can no longer
use the (unreliable) test for transaction outputs in the UTXO set
to determine whether we already have a particular transaction.
This clarifies a bit more the ways in which the new script execution
cache could break consensus in the future if additional data from
the CCoins object were to be used as a part of script execution.
After this change, any such consensus breaks should be very visible
to reviewers, hopefully ensuring no such changes can be made.
The new functions are:
* CCoinsViewCache::AddCoin: Add a single COutPoint/Coin pair.
* CCoinsViewCache::SpendCoin: Remove a single COutPoint.
* AddCoins: utility function that invokes CCoinsViewCache::AddCoin for
each output in a CTransaction.
* AccessByTxid: utility function that searches for any output with
a given txid.
* CCoinsViewCache::AccessCoin: retrieve the Coin for a COutPoint.
* CCoinsViewCache::HaveCoins: check whether a non-empty Coin exists
for a given COutPoint.
The AddCoin and SpendCoin methods will eventually replace ModifyCoins
and ModifyNewCoins, AddCoins will replace CCoins::FromTx, and the new
AccessCoins and HaveCoins functions will replace their per-txid
counterparts.
Note that AccessCoin for now returns a copy of the Coin object. In a
later commit it will be change to returning a const reference (which
keeps working in all call sites).
The earlier CTxInUndo class now holds the same information as the Coin
class. Instead of duplicating functionality, replace CTxInUndo with a
serialization adapter for Coin.
6d7104c99 [Qt] make sure transaction table entry gets updated after bump (Jonas Schnelli)
32325a3f5 [Qt] hide bump context menu action if tx already has been bumped (Jonas Schnelli)
Tree-SHA512: d3e5991145879b7f6b212d9d9c6f423609dc8e6fa7f6feb7df931691f1dec2acb6ab162c2fb7e758d3ca3f3fb14363df2f50f0e83e83068da5cc7e6de35e69d2
b6fbfc2 net: only enforce the services required to connect (Cory Fields)
Tree-SHA512: 88943bff63213a734f3c96c45760cadaeb9ba18287c8a20c279851ebaf058a334c969028fb2180f155508e3eea4b838147382e4f2b655e7a9aa098eadc81d53e
cd5622d Make bitcoind invalid argument error message specific (Wladimir J. van der Laan)
Tree-SHA512: 78999b9359685c4090f9a112e1d02bdddac22173f5f04600773b042acb9481ebb54d0f73d9d6d74249f845f497927a58d59de69bf33e3dccf096c3c80c7ebf6b
Previously, transaction metadata (height, coinbase or not, and before
the previous commit also nVersion) was only stored for undo records
that correspond to the last output of a transaction being spent.
This only saves 2 bytes per undo record. Change this to storing this
information for every undo record, and stop complaining for having it
in non-last output spends. This means that undo dat written with
this patch won't be readable by older versions anymore.
This makes the following changes:
* In undo data and the chainstate database, the transaction nVersion
field is removed from the data structures, always written as 0, and
ignored when reading.
* The definition of hash_serialized in gettxoutsetinfo is changed to no
longer incude the nVersion field. It is renamed to hash_serialized_2
to avoid confusion. The new definition also includes transaction
height and coinbase information, as this information was missing
before.
This depends on having a CHashVerifier-based undo data checksum
verifier.
Apart from changing the definition of serialized_hash, downgrading
after using this patch is supported, as no release ever used the value
of nVersion field in UTXO entries.
This is necessary later, when we drop the nVersion field from the undo
data. At that point deserializing and reserializing the data won't
roundtrip anymore, and thus that approach can't be used to verify
checksums anymore.
With this CHashVerifier approach, we can deserialize while hashing the
exact serialized form that was used. This is both more efficient and
more correct in that case.
The error() function unconditionally reports an error. It should only
be used for actually exception situations, and not for the type of
inconsistencies that ApplyTxInUndo/DisconnectBlock can graciously deal
with.
This also makes a subtle semantics change: in ApplyTxInUndo, when a
record with metadata is encountered (indicating it is the last spend
from a tx), don't wipe the CCoins record if it wasn't empty at that
point. This makes sure that UTXO operations never affect any other
UTXOs (including those from the same tx).
513da90cd Add test for empty chain and reorg consistency for gettxoutsetinfo. (Gregory Maxwell)
822755a42 Fix: make CCoinsViewDbCursor::Seek work for missing keys (Pieter Wuille)
Tree-SHA512: e549921e8b8f599bf61ebe0ee7ef1d2f474043723d633e24665fe434b996a98e039612de8a1c2cd16b63f154943ff5ea1c1935e9561cfb813a00d47d926d0b22
No change in behavior. Get rid of specifiedConfirmTarget if/else block and
rename specifiedConfirmTarget and ignoreUserSetFee variables to
ignoreGlobalPayTxFee.
The current message is not helpful. Hardly anyone even remembers that
bitcoind used to be a cli utility, let alone new users. Print what the
actual problem is.
211adc0 Use range-based for loops (C++11) when looping over vector elements (practicalswift)
Tree-SHA512: 0e007f20dcef99d3c7a1036265e00f689d69f42e02fd82dd8389f45b52d31947e5f9388de2610d3d9bd9f554915ce0d35ebce561e5ae3a9013956d0ee4937145
5844609 [net] Avoid initialization to a value that is never read (practicalswift)
Tree-SHA512: 068c3fba58034187f546688bc9b8b7317e0657e797850613fb6289a4efc28637e4d06a0fa5e57480538c6b8340ed6d6a6c6f9a96f130b698d5d60975490a03d8
A few code changes were needed to accompany the test:
* Adding setObjectName() calls for a few Qt controls to make them easily
accessible from the test.
* Calling contextMenu->popup() instead of contextMenu->exec() to open
the transaction list context menu without blocking the test thread.
* Opening the context menu at the contextualMenu event point rather than
the cursor position (this change was not strictly needed to make the test
work, but is more correct).
* Updating the bumped transaction row with showTransaction=true instead of
false. This is needed to prevent the bumped tx from being hidden, so the last
part of the test which attempts to bump the bumped tx can work. (Technically
this change is a more general bugfix not limited to the testing environment,
but the bug doesn't happen outside of the testing environment because in the
full Qt client, a queued NotifyTransactionChanged notification causes the row
to be updated twice, first with showTransaction=false, then immediately after
with showTransaction=true.)
888cce5 Add perf counter data to GetStrongRandBytes state in scheduler (Matt Corallo)
399fb8f Add internal method to add new random data to our internal RNG state (Matt Corallo)
Tree-SHA512: 9732a3804d015eaf48d56b60c73880014845fd17a098f1ac2eff6bd50a4beb8b8be65956ac1f0d641e96e3a53c17daddd919401edbf2e3797c3fb687730fb913
```
$ git blame src/policy/fees.cpp | grep becuase
3810e976 (2017-03-07 11:33:44 -0500 789) * checks for 2*target becuase we are taking the max over all time
$ git blame src/policy/fees.h | grep successfullly
2d2e1705 (2017-04-12 12:29:03 -0400 54) * representing that a tx was successfullly confirmed in less than or equal to
$ git blame src/wallet/feebumper.cpp | grep "hasen't"
a3878374 (2017-05-11 09:34:39 +0200 258) // make sure the transaction still has no descendants and hasen't been mined in the meantime
```
693247b [test] Speed up fuzzing by ~200x when using afl-fuzz (practicalswift)
Tree-SHA512: 95922fc2616b8cb00dd531ed1140a52bbda4e04292dd8c1c60a8f49dbf6ccb797a18b61180b3fb68d695456b478a1f5ae7fda47e8ecee41dd65555487aef40a3
43c5877 Prevent shadowing the global dustRelayFee. (Pavel Janík)
Tree-SHA512: 9765931a7753c484990003396afd0bb65a53f42d1cad9502017720618ce90b3c5ae68591db01e3524adecdbe6925a5eeeebf04012ba644ef3b65073af207ae5d
Previously if we didn't have any local addresses, GetLocalAddress would return
0.0.0.0 and then we'd swap in a peer's notion of our address in AdvertiseLocal,
but then nServices would never get set.
a38783747 Make sure we re-check the conditions of a feebump during commit (Jonas Schnelli)
9b9ca538c Only update the transactionrecord if the fee bump has been commited (Jonas Schnelli)
6ed4368f1 Make sure we use nTxConfirmTarget during Qt fee bumps (Jonas Schnelli)
be08fc39d Make sure we always update the table row after a bumpfee call (Jonas Schnelli)
2678d3dc6 Show old-fee, increase a new-fee in Qt fee bumper confirmation dialog (Jonas Schnelli)
2ec911f60 Add cs_wallet lock assertion to SignTransaction() (Jonas Schnelli)
fbf385cc8 [Qt] simple fee bumper with user verification (Jonas Schnelli)
Tree-SHA512: a3ce626201abf64cee496dd1d83870de51ba633de40c48eb0219c3eba5085c038af34c284512130d2544de20c1bff9fea1b78f92e3574c21dd4e96c11b8e7d76
38bc1ec Make more json-like output from estimaterawfee (Alex Morcos)
2d2e170 Comments and improved documentation (Alex Morcos)
ef589f8 minor cleanup: remove unnecessary variable (Alex Morcos)
3ee76d6 Introduce a scale factor (Alex Morcos)
5f1f0c6 Historical block span (Alex Morcos)
aa19b8e Clean up fee estimate debug printing (Alex Morcos)
10f7cbd Track first recorded height (Alex Morcos)
3810e97 Rewrite estimateSmartFee (Alex Morcos)
c7447ec Track failures in fee estimation. (Alex Morcos)
4186d3f Expose estimaterawfee (Alex Morcos)
2681153 minor refactor: explicitly track start of new bucket range and don't update curNearBucket on final loop. (Alex Morcos)
1ba43cc Make EstimateMedianVal smarter about small failures. (Alex Morcos)
d3e30bc Refactor to update moving average on fly (Alex Morcos)
e5007ba Change parameters for fee estimation and estimates on all 3 time horizons. (Alex Morcos)
c0a273f Change file format for fee estimates. (Alex Morcos)
Tree-SHA512: 186e7508d86a1f351bb656edcd84ee9091f5f2706331eda9ee29da9c8eb5bf67b8c1f2abf6662835560e7f613b1377099054f20767f41ddcdbc89c4f9e78946d
65d484a Output line to debug.log when IsInitialBlockDownload latches to false (Alex Morcos)
Tree-SHA512: 8b9d1377167a78ea55afc4582c8b9305c8b0fe56063a25920e9d45ea9335470314e3cfdc92e78b803d304476fa4c19b228fea1758bbeadd20c719006d814b5f2
Motivation for moving these is to make supporting IPC simpler (#10102), so
these lookups can be one-shot IPC requests, instead of back-and-forth
interactions over the IPC channel.
Also these functions are potentially useful outside of the bitcoin GUI (e.g.
for RPCs).
2f84cf6 tests: Correct testcase in script_tests.json for large number OP_EQUAL (Wladimir J. van der Laan)
Tree-SHA512: 3a4d33c7d65ea40f25e2f5f2dfab8b0262cac8a7c33698eef8332ca5ec4a6f88f73fc51441892b49ffa85660be5037644430585f2eab76e257d544f9c2271ab7
Start importwallet rescans at the first block with timestamp greater or equal
to the wallet birthday instead of the last block with timestamp less or equal.
This fixes an edge case bug where importwallet could fail to start the rescan
early enough if there are blocks with decreasing timestamps or multiple blocks
with the same timestamp.
761392d [logging] log system time and mock time (John Newbery)
Tree-SHA512: 0a4b3ad74bcac201be490fe12e4b45adeabc39030ac46f40e1aeb2a20b2f3963e4468e65798d8aaeca1818759cab55ff2b2aa214500aa11571492c3301dd31c1
e3c9f2d Use a verbosity instead of two verbose parameters (Andrew Chow)
c99ab3c RPC: Allow multiple names for parameters (Luke Dashjr)
Tree-SHA512: 686b38f6b0106563738d51f55666fe6d49a5b121b30d4480c2bfb640a59ede8e6f7f3c05c3c5d80a5288e127991e191d19d1d4f9ace566fd39edeb27b31857ff
An off-by-one-block bug in importmulti rescan logic could cause it to return
success in an edge case even when a rescan was not successful. The case where
this would happen is if there were multiple blocks in a row with the same
GetBlockTimeMax() value, and the last block was scanned successfully, but one
or more of the earlier blocks was not readable.
Verbose is changed to an int. This can have values from 0-2 for each level of verbosity.
Verbosity level 2 has transaction details displayed in the results.
For the per confirmation number tracking of data, introduce a scale factor so that in the longer horizones confirmations are bucketed together at a resolution of the scale. (instead of 1008 individual data points for each fee bucket, have 42 data points each covering 24 different confirmation values.. (1-24), (25-48), etc.. )
Store in fee estimate file the block span for which we were tracking estimates, so we know what targets we can successfully evaluate with the data in the file. When restarting use either this historical block span to set valid range of targets until our current span of tracking estimates is just as long.
Track the first time we seen txs in a block that we have been tracking in our mempool. Used to evaluate validity of fee estimates for different targets.
Change the logic of estimateSmartFee to check a 60% threshold at half the target, a 85% threshold at the target and a 95% threshold at double the target. Always check the shortest time horizon possible and ensure that estimates are monotonically decreasing. Add a conservative mode, which makes sure that the 95% threshold is also met at longer time horizons as well.
Track information the ranges of fee rates that were used to calculate the fee estimates (the last range of fee rates in which the data points met the threshold and the first to fail) and provide an RPC call to return this information.
Instead of stopping if it encounters a "sufficient" number of transactions which don't meet the threshold for being confirmed within the target, it keeps looking to add more transactions to see if there is a temporary blip in the data. This allows a smaller number of required data points.
Cleanup request from #10287.
Change "Test #:" comments to "Test:"
Change BOOST_CHECK(... = ...) to BOOST_CHECK_EQUAL(..., ...)
Remove three unnecessary if statements
97477c5 Maintain state across GetStrongRandBytes calls (Pieter Wuille)
Tree-SHA512: 77e9b1f3c6eeb0c2a3e0c64358150767222ff0b7120ccd5f4ae0276cea0e4fa275c1b757e3f20be07dc0b4ef07f70ab0b70112080c8d3d0cb6ed703db8a59168
2c0a6f1 Use sanity check timestamps as entropy (Pieter Wuille)
33f853d Test that GetPerformanceCounter() increments (Pieter Wuille)
f544094 Use hardware timestamps in RNG seeding (Pieter Wuille)
Tree-SHA512: ea96ff56d425b5dc693b4dd35c8aa64ba20a01b9bd7d2d65298ece623f434e8cfa190f9c0f9b76df8aa496547bfa64533eb751edec8401d09bd5ee3478928a59
ed36de5 [tests] Update Unit Test for addrman.h/addrman.cpp (Jimmy Song)
Tree-SHA512: e7c08c19e227c34c230900e14a176b2290022b78b0ece387452e673662491c11f26249cbf1711235276c07a964c339e27b4cda9a2730ded5c0e23a650e0d72db
c1082a7 Chainparams: Use the factory for pow tests (Jorge Timón)
2351a06 Chainparams: Get rid of CChainParams& Params(std::string) (Jorge Timón)
f87f362 Chainparams: Use a regular factory for creating chainparams (Jorge Timón)
Tree-SHA512: 359c8a2a1bc9d02db7856d02810240ada28048ac088f878b575597a7255cdb0ffdd1a647085ee67a34c6a7e7ed9e6cfdb61240cf6e75139619b640dbb096072c
381a46e Consensus: Policy: MOVEONLY: Move CFeeRate out of the consensus module (Jorge Timón)
330bb5a Consensus: Minimal way to move dust out of consensus (Jorge Timón)
Tree-SHA512: 19a2ea8169afd5a9d3f940d8974e34cfaead153e3ff3068ac82fccdb8694d19d9b45938904ec9e8cd095bd5ca3a0080364da29372f6aaf56b11a6c2ccd6c7a4d
3a0a5bc [doc] Add hint about getmempoolentry to getrawmempool help. (Karl-Johan Alm)
Tree-SHA512: 8327d7d7ad93296525fbf95b7a824e3525bde84653999f125afd845823eb39e3a03cd39725962ed949aa2b9ad207ecad6d287294fa321ff1a4d7fbd5a4b8560b
0f3471f net: make CNode's id private (Cory Fields)
9ff0a51 scripted-diff: net: Use accessor rather than node's id directly (Cory Fields)
e50c33e devtools: add script to verify scriptable changes (Cory Fields)
Tree-SHA512: a0ff50f4e1d38a2b63109b4996546c91b3e02e00d92c0bf04f48792948f78b1f6d9227a15d25c823fd4723a0277fc6a32c2c1287c7abbb7e50fd82ffb0f8d994
vToFetch is never used after declaration. When checked if not empty,
evaluation is always false. Best case scenario this is optimized by the
compiler, worst case it wastes cpu cycles. It should be removed either
way.
84973d3 Merge #454: Remove residual parts from the schnorr expirement.
5e95bf2 Remove residual parts from the schnorr expirement.
cbc20b8 Merge #452: Minor optimizations to _scalar_inverse to save 4M
4cc8f52 Merge #437: Unroll secp256k1_fe_(get|set)_b32 to make them much faster.
465159c Further shorten the addition chain for scalar inversion.
a2b6b19 Fix benchmark print_number infinite loop.
8b7680a Unroll secp256k1_fe_(get|set)_b32 for 10x26.
aa84990 Unroll secp256k1_fe_(get|set)_b32 for 5x52.
cf12fa1 Minor optimizations to _scalar_inverse to save 4M
1199492 Merge #408: Add `secp256k1_ec_pubkey_negate` and `secp256k1_ec_privkey_negate`
6af0871 Merge #441: secp256k1_context_randomize: document.
ab31a52 Merge #444: test: Use checked_alloc
eda5c1a Merge #449: Remove executable bit from secp256k1.c
51b77ae Remove executable bit from secp256k1.c
5eb030c test: Use checked_alloc
72d952c FIXUP: Missing "is"
70ff29b secp256k1_context_randomize: document.
9d560f9 Merge #428: Exhaustive recovery
8e48aa6 Add `secp256k1_ec_pubkey_negate` and `secp256k1_ec_privkey_negate`
2cee5fd exhaustive tests: add recovery module
678b0e5 exhaustive tests: remove erroneous comment from ecdsa_sig_sign
03ff8c2 group_impl.h: remove unused `secp256k1_ge_set_infinity` function
a724d72 configure: add --enable-coverage to set options for coverage analysis
b595163 recovery: add tests to cover API misusage
6f8ae2f ecdh: test NULL-checking of arguments
25e3cfb ecdsa_impl: replace scalar if-checks with VERIFY_CHECKs in ecdsa_sig_sign
git-subtree-dir: src/secp256k1
git-subtree-split: 84973d393ac240a90b2e1a6538c5368202bc2224
Rather than re-add disconnected block transactions back to the mempool
immediately, store them in a separate disconnectpool for later processing,
because we expect most such transactions to reappear in the chain that is
still to be connected (and thus we can avoid the work of reprocessing those
transactions through the mempool altogether).
a750d77 Add tests for mempool persistence (John Newbery)
91c91e1 Control mempool persistence using a command line parameter. (John Newbery)
Tree-SHA512: 157d01cefd1903b8bfc5cbab42a3cc5e9c1094179bf4b64b3d34c0d4d9b976d593755bfea5c41c631cb758e1de17c6c2058c130d487d20560b7c0bafcddfa520
185c7f0 Avoid reading the old hd master key during wallet encryption (Matt Corallo)
Tree-SHA512: b744e8490c0e948355bb77b2695902bb99f89a68af46aa2be9120bd2ccf3c340eb8a56340fec117f9a935192298028945c9b18120ee6b8b23e7da8ffdb635745
Add test for adding multiple addresses to address manager
Clean up unnecessary modulo operations
Add test for GetNewBucket's alternate method signature
d6732d8 [tests] update disconnect_ban.py test case to work with listbanned (John Newbery)
77c54b2 [net] listbanned RPC and QT should show correct banned subnets (John Newbery)
Tree-SHA512: edd0e43377d456260d2697213c2829f8483630f3a668b6707d52605faefa610d951d10e6f22a95eff483cbd14faa8ac9b69fa7d3c0b5735c5f3df23fd71282e0
7c58863 [Wallet] unset change position when there is no change on exact match (Gregory Sanders)
Tree-SHA512: ce8b9337e4132e32d80f954258d50938052c833a48e39431649d6adb16e3d18626a0ae5d300827e7fa397927fba72a1f066cb31af9b0a3ef7f1feb6024461626
DisconnectBlock currently has a complicated interface:
Situation Return value
pfClean != nullptr pfClean == nullptr
All good: true true
Failure: false false
Unclean rewind: true false
with *pfClean=false
Change this to return a tristate enum instead. As an added bonus,
remove the ValidationState& argument which was unused.
b51aaf1 Remove unused C++ code not covered by unit tests (practicalswift)
Tree-SHA512: 267bbd87df01a296bf23e82a8b6ee968e13e23a6aaecc535d803890a3e3e9f6208c7fc4c1f97afd98ed3e498b12fe1ada7e3cb2977ad12359a813f57336c74e5
dcb69fd [test] Unit test amount.h/amount.cpp (Jimmy Song)
Tree-SHA512: dc50e6158322a282a8b8b60c8eab7ce327a33c48113a1455b8a1784f07e6277ad499e85ec978199468a2dc34e9e288287c8803c215f810fa2d841cdda9a414f5
This adds a simpler new implementation of getbalance logic along with asserts
to confirm it behaves identically to the old logic. The old logic is removed in
the next commit.
1b14449 [test] Add Unit Test for GetListenPort (Jimmy Song)
Tree-SHA512: aea5f60fb3699680cc5acac9d9c8d8712634db9d629bbfa1815a29e5cf46c22f783886c608664baaa91b3282c52ce8069c358850cf4f90acf731a9e6c1701caa
c36ea69 [wallet] Make sure pindex is non-null before possibly referencing in LogPrintf call. (Karl-Johan Alm)
Tree-SHA512: a14c9f3e1228bca91977bea821c56a377d80889b41d250050c9be67aa93e460319a7cf1d4b63ee40f23b5a34159590f0e3fe15dc88698dc694c0c8098bd2db4d
e6756ad Switch CCoinsMap from boost to std unordered_map (Pieter Wuille)
344a2c4 Add support for std::unordered_{map,set} to memusage.h (Pieter Wuille)
Tree-SHA512: 51288301e7c0f29ffac8c59f4cc73ddc36b7abeb764009da6543f2eaeeb9f89bd47dde48131a7e0aefad8f7cb0b74b2f33b8be052c8e8a718339c3e6bb963447
911a480 wallet: Add comment describing the various classes in walletdb.h (Wladimir J. van der Laan)
69d2e9b wallet: Make IsDummy private in CWalletDBWrapper (Wladimir J. van der Laan)
3323281 wallet: CWalletDB CDB composition not inheritance (Wladimir J. van der Laan)
be9e1a9 wallet: Reduce references to global bitdb environment (Wladimir J. van der Laan)
071c955 wallet: Get rid of fFileBacked (Wladimir J. van der Laan)
71afe3c wallet: Introduce database handle wrapper (Wladimir J. van der Laan)
Tree-SHA512: e4e72953c61a2f6995d609a32f8ed8e18cab9a92bc9e193d46a1d1f06d9daa5c6da6fce2867d4e3ba4fc0439141901a3d35f246486f0fa8f59587786379dfcbd
dd07068 Fixed typo in documentation for merkleblock.h (Mikerah)
Tree-SHA512: 92655c8022eb33852c116da517b12bd17b3b668713cd85fe185a15245ea9810605626b1d0955fa117f7b56863e0a52b3a86dab42409332452b5eb72a7d34f30d
Move buckets and bucketMap to be stored as part of overall serialization of estimator.
Add some placeholder data so file format is only changed once.
Maintain 3 different TxConfirmStats with potential for different decays and scales.
68af651 MOVEONLY: move TxConfirmStats to cpp (Alex Morcos)
2332f19 Initialize TxConfirmStats in constructor (Alex Morcos)
5ba81e5 Read and Write fee estimate file directly from CBlockPolicyEstimator (Alex Morcos)
14e10aa Call estimate(Smart)Fee directly from CBlockPolicyEstimator (Alex Morcos)
dbb9e36 Give CBlockPolicyEstimator it's own lock (Alex Morcos)
f6187d6 Make processBlockTx private. (Alex Morcos)
ae7327b Make feeEstimator its own global instance of CBlockPolicyEstimator (Alex Morcos)
Tree-SHA512: dbf3bd2b30822e609a35f3da519b62d23f8a50e564750695ddebd08553b4c01874ae3e07d792c6cc78cc377d2db33b951ffedc46ac7edaf5793f9ebb931713af
CWalletDB now contains a CDB instead of inheriting from it.
This makes it easier to replace the internal transaction with a different
database, without leaking through internals.
Instead, CWalletDB() with a dummy handle will just give you a no-op
database in which writes always succeeds and reads always fail. CDB
already had functionality for this, so just use that.
Abstract database handle from explicit strFilename into
CWalletDBWrapper.
Also move CWallet::Backup to db.cpp - as it deals with representation
details this is a database specific operation.
4082fb0 Add missing <atomic> header in clientmodel.h (Jonas Schnelli)
928d4a9 Set both time/height header caches at the same time (Jonas Schnelli)
610a917 Declare headers height/time cache mutable, re-set the methods const (Jonas Schnelli)
cf92bce Update the remaining blocks left in modaloverlay at init. (Jonas Schnelli)
7148f5e Reduce cs_main locks during modal overlay by adding an atomic cache (Jonas Schnelli)
Tree-SHA512: a92ca22f90b8b2a5e8eb94fdce531ef44542e21a8dbbb0693f7723d7018592cb68de687a2a0aac91d31cbf019793f8e922550656d2b130ed3d854d60630341db
disconnectnode() can currently only be called with the IP address/port
of the node the user wishes to connect. This commit allows the node to
be disconnected using the nodeid returned by getpeerinfo().
608bbcc [qt] Stop treating coinbase outputs differently: show them at 1conf (Matt Corallo)
Tree-SHA512: 62ba10520da8b83cf8e97c86dec3ccdcca8b7bfae0174d1a4099d33aa5d11933cc7c248394bf67c2b105211cf7931955816c741957832e703211030c7f4f002f
a4186dd wallet: Use boost to more portably ensure -wallet specifies only a filename (Luke Dashjr)
Tree-SHA512: 6dfde31fa599638e5ec76489363e2fed97403be3e5762e4560dfc6ac261ce169a92b5a1b92bb34a893cc898e6073c81f74f49528e8df07e86273ddb37dd1ce80
This was a long-standing and annoying problem.
If autogen.sh was not manually run after touching configure.ac,
bitcoin-config.h would not be properly regenerated. This causes very subtle
problems when configure appears to enable a new value, but it does not end up
reflected in the build.
c9e31c3 Clarify importprivkey help text with example of blank label without rescan Occasionally I waste a lot of time not remembering that the second parameter to importprivkey must be blank if you intend to stop rescan with "false" as the third parameter. (Warren Togami)
Tree-SHA512: 23781e1d6fd59a9d06d6e12ad10e8ed6641947b3e4a1f66c8fdb5d44cbd8f291e8f2a5e686aa9f9ba5e4bab8ca688caa17244e837f651546055ddf7cc8e7df8f
Occasionally I waste a lot of time not remembering that the second parameter to importprivkey must be blank if you intend to stop rescan with "false" as the third parameter.
This makes SetHDMasterKey responsible for maintinaing the CHDChain
version instead of always creating it with the latest version and
making EncryptWallet responsible for keeping the version from
changing.
b49ad44 Add comment about cs_most_recent_block coverage (Matt Corallo)
c47f5b7 Cache witness-enabled state with recent-compact-block-cache (Matt Corallo)
efc135f Use cached [compact] blocks to respond to getdata messages (Matt Corallo)
Tree-SHA512: ffc478bddbf14b8ed304a3041f47746520ce545bdeffa9652eff2ccb25c8b0d5194abe72568c10f9c1b246ee361176ba217767af834752a2ca7263d292005e87
This removes another callback from block connection logic, making it
easier to reason about the wallet-RPCs-returns-stale-info issue.
UpdatedTransaction was previously used by the GUI to display
coinbase transactions only after they have a block built on top of
them. This worked fine for in most cases, but only worked due to a
corner case if the user received a coinbase payout in a block
immediately prior to restart. In that case, the normal process of
caching the most recent coinbase transaction's hash would not work,
and instead it would only work because of the on-load -checkblocks
calling DisconnectBlock and ConnectBlock on the current tip.
In order to make this more robust, a full mapWallet loop after the
first block which is connected after restart was added.
c37e32a [Wallet] Prevent CInputCoin to be in a null state (NicolasDorier)
f597dcb [Wallet] Simplify code using CInputCoin (NicolasDorier)
e78bc45 [Wallet] Decouple CInputCoin from CWalletTx (NicolasDorier)
fd44ac1 [Wallet] Rename std::pair<const CWalletTx*, unsigned int> to CInputCoin (NicolasDorier)
Tree-SHA512: d24361fc514a0566bce1c3953d766dfe4fece79c549cb4db2600695a4ce08e85caa61b7717812618e523a2f2a1669877dad2752ed079e2ed2d27249f9bc8590e
d0cd0bd Make CWallet::SyncTransactions() interface friendlier (John Newbery)
714e4ad AddToWalletIfInvolvingMe should test pIndex, not posInBlock (John Newbery)
Tree-SHA512: d02e7ffce635c53f3e099c37cc5613b431f74e0e3ea189269132901a99fc539477849ddad0282ce721d46a4d794c2d46523d58b64f0c26c655f70b5808c745a5
8c3e6c6 Changed "Send" button default status from true to false (KibbledJiveElkZoo)
Tree-SHA512: e60d7481351e88925d99b33bdb616f3c234e93ef052571b9c4a1328186ec9abb8b61b0c4299afcb731edad2634aef6b1adaad121646b6c0c56dc933662904674
7fd50c3 allow libevent logging to be updated during runtime (John Newbery)
5255aca [rpc] Add logging RPC (John Newbery)
4d9950d Set BCLog::LIBEVENT correctly for old libevent versions. (John Newbery)
Tree-SHA512: d6788a7205372c0528da71eca052910dfb055f2940ca884f422ff3db66e23a2b49c6a15b8f27d5255554fe5c5a928f5dd903fdc63b0bd6c8fa7783e77bb30fe8
b1a6d4c Take a CTransactionRef in AddToWalletIfInvolvingMe to avoid a copy (Matt Corallo)
1c95e2f Use std::shared_ptr instead of boost::shared_ptr in ScriptForMining (Matt Corallo)
91f1e6c Remove dead-code tracking of requests for blocks we generated (Matt Corallo)
acad82f Add override to functions using CValidationInterface methods (Matt Corallo)
e6d5e6c Hold cs_wallet for whole block [dis]connection processing (Matt Corallo)
461e49f SyncTransaction->TxAddedToMempool/BlockConnected/Disconnected (Matt Corallo)
f404334 Handle SyncTransaction in ActivateBestChain instead of ConnectTrace (Matt Corallo)
a147687 Keep conflictedTxs in ConnectTrace per-block (Matt Corallo)
d3167ba Handle conflicted transactions directly in ConnectTrace (Matt Corallo)
29e6e23 Make ConnectTrace::blocksConnected private, hide behind accessors (Matt Corallo)
822000c Add pblock to connectTrace at the end of ConnectTip, not start (Matt Corallo)
f5e9a01 Include missing #include in zmqnotificationinterface.h (Matt Corallo)
Tree-SHA512: 8893d47559da3b28d2ef7359768547cba8a4b43b6f891d80f5848f995a84b1517bfb0f706fdc8cd43f09a1350349eb440d9724a59363ab517dfcc4fcb31b2018
218d915 [bench] Avoid function call arguments which are pointers to uninitialized values (practicalswift)
Tree-SHA512: 68d62e9442094f171433291b7f13dba20fc7ead5fd7f2292e1eb97ae51aa2345d40224c4a65c2e5d3552802b3cd0f675a82b6181cf5b77e964355650b25089f0
e9ff818 Fix for issues with startup and multiple monitors on windows. (Allan Doensen)
Tree-SHA512: 8502042a9b5a2fd6f5e409163bee9bd7c85e34c158754f393065f8cc6cdd0f8505b9a1803069d01fc1fb2df04d1b2ed6291388851f2ed3608eb2dd53fc22e06e
9ab9e7d Add a button to open the config file in a text editor (Eric Shaw Jr)
Tree-SHA512: 1d13be9ac788a05a5116dbb3e1136ef65732dc2b5634547860612658109668922c9ea80b77bde4ba5beaa762d54f2a986a6064d4e34e963cdcd3d126a4eced37
5f59d3e Improve CFeeBumper interface, add comments, make use of std::move (Jonas Schnelli)
0df22ed Cancel feebump is vErrors is not empty (Jonas Schnelli)
44cabe6 Use static calls for GetRequiredFee and GetMinimumFee, remove make_pair from emplace_back (Jonas Schnelli)
bb78c15 Restore CalculateMaximumSignedTxSize function signature (Jonas Schnelli)
51ea44f Use "return false" instead assert() in CWallet::SignTransaction (Jonas Schnelli)
bcc72cc Directly abort execution in FeeBumper::commit if wallet or tx is not available (Jonas Schnelli)
2718db0 Restore invalid fee check (must be > 0) (Jonas Schnelli)
0337a39 Refactor Bumpfee core functionality (Jonas Schnelli)
d1a95e8 Bumpfee move request parameter interaction to the top (Jonas Schnelli)
Tree-SHA512: 0e6d1f3322ed671fa2291e59ac9556ce4646bc78267edc6eedc46b0014b7b08aa83c30315358b911d82898847d4845634a18b67e253a7b699dcc852eb2652c07
9ff7818 doc: Update release process for simplified version bumping (Wladimir J. van der Laan)
08d9aee build: Remove duplicate version information from src/clientversion.h (Wladimir J. van der Laan)
168a703 doc: Make build system insert version in Doxyfile (Wladimir J. van der Laan)
b67eb8d doc: Remove version numbers from READMEs (Wladimir J. van der Laan)
Tree-SHA512: 531e44282b1c1383a382847a5605177917dfbf78acfaa754d1cbadd2e165c7e34ddbd01790f87615083fac359571708c2551ad24b712aab1f84a2068360c3a17
This simplifies fixing the wallet-returns-stale-info issue as we
can now hold cs_wallet across an entire block instead of only
per-tx (though we only actually do so in the next commit).
This change also removes the NOT_IN_BLOCK constant in favor of only
passing the CBlockIndex* parameter to SyncTransactions when a new
block is being connected, instead of also when a block is being
disconnected.
This change adds a parameter to BlockConnectedDisconnected which
lists the transactions which were removed from mempool due to
confliction as a result of this operation. While its somewhat of a
shame to make block-validation-logic generate a list of mempool
changes to be included in its generated callbacks, fixing this isnt
too hard.
Further in this change-set, CValidationInterface starts listening
to mempool directly, placing it in the middle and giving it a bit
of logic to know how to route notifications from block-validation,
mempool, etc (though not listening for conflicted-removals yet).
f110272 Remove `namespace fs=fs` (Wladimir J. van der Laan)
75594bd torcontrol: Use fs::path instead of std::string for private key path (Wladimir J. van der Laan)
2a5f574 Use fsbridge for fopen and freopen (Wladimir J. van der Laan)
bac5c9c Replace uses of boost::filesystem with fs (Wladimir J. van der Laan)
7d5172d Replace includes of boost/filesystem.h with fs.h (Wladimir J. van der Laan)
19e36bb Add fs.cpp/h (Wladimir J. van der Laan)
Tree-SHA512: 2c34f059dfa6850b9323f3389e9090a6b5f839a457a2960d182c2ecfafd9883c956f5928bb796613402d3aad68ebc78259796a7a313f4a6cfa98aaf507a66842
cd7f394 initialize flag variable to 0 (and continue if GetLogCategory() fails) (John Newbery)
Tree-SHA512: d0f2653bd0e71ed763220cb08d3a5335c5bdfe2f54ff7f9302d97f3265d7aa7f57606fe416a61aaac1535dbb046d0fb40a61f5a9d5cf234b042268e00ee7679d
9bef02e Bugfix: ancestor modifed fees were incorrect for descendants (Suhas Daftuar)
ba7dd8b Test prioritisetransaction and ancestor fee state (Suhas Daftuar)
Tree-SHA512: 01977d88e1afb093a003f22a6f29ea60df3d70a179fe7e55910b9c8c340c4af9fb20cdc804c40235b62c43c453f0194eda0d0d4dbd365d2d98347f5dbe5de01c
30f30c0 Add braces to submitblock per current style. (Gregory Maxwell)
4f15ea1 Check transaction count early in submitblock. (Gregory Maxwell)
ada0caa Make GetWitnessCommitmentIndex callable on blocks without a coinbase txn. (Gregory Maxwell)
Tree-SHA512: 02dcd337ad9cdd8e4fa6a42c009d016026d1229c193676ed6fcc9ce55e924fedec57f516ac1e95c3db0985243ba908307338ce783a70416cb292bed881002bfc
3bde556 Add -debugexclude option to switch off logging for specified components (John Newbery)
Tree-SHA512: 30202e3f2085fc2fc5dd4bedb92988f4cb162c612a42cf8f6395a7da326f34975ddc347f82bc4ddca6c84c438dc0cc6e87869f90c7ff88105dbeaa52a947fa43
6d5dd60 No need to use OpenSSL malloc/free (Thomas Snider)
Tree-SHA512: 29f790067ffd5a10a8e1a621318a0ba445691f57c804aa3b7c8ca372c8408d8c7fe703c42b48018e400fc32e3feff5ab401d97433910ce2c50e69da0b8a6662e
There is no point in even hashing a submitted block which doesn't have
a coinbase transaction.
This also results in more useful error reporting on corrupted input.
Thanks to rawodb for the bug report.
e9a6461 Make qt wallet test compatible with qt4 (Russell Yanofsky)
Tree-SHA512: a3e4598986cb3c5c20aaa1d440abc886d84fcc69a6ee4079787cfc8e3a2dce655060ff95612cb15ce8b5a9b8911e4afe2281345b59a4353ec32edf3771338381
This changes the logging categories to boolean flags instead of strings.
This simplifies the acceptance testing by avoiding accessing a scoped
static thread local pointer to a thread local set of strings. It
eliminates the only use of boost::thread_specific_ptr outside of
lockorder debugging.
This change allows log entries to be directed to multiple categories
and makes it easy to change the logging flags at runtime (e.g. via
an RPC, though that isn't done by this commit.)
It also eliminates the fDebug global.
Configuration of unknown logging categories now produces a warning.
Since we are more accurately measuring pcoinsTip peak usage at twice the current in dynamic usage, it makes sense to double the default (this will lead to the same effective usage and peak usage as previously).
We should also double the buffer used to avoid flushing if above 90% but still sufficient space remaining.
f885b67 refactor: Make rest.cpp dependency on `*toJSON` in `blockchain.cpp` explicit (Wladimir J. van der Laan)
8d8f28d refactor: Move RPCNotifyBlockChange out of `rpc/server.h` (Wladimir J. van der Laan)
e6dcfee refactor: Move GetDifficulty out of `rpc/server.h` (Wladimir J. van der Laan)
Tree-SHA512: fc2656611d18442f2fddba5ac1554d958151f6785c2039afdfc36735d7e71592d9686ff6cc7b2ad95180071d7514470e62c52d697c5a1e88f851bddaf5942edb
7228ce8 Compensate for memory peak at flush time (Pieter Wuille)
Tree-SHA512: 97e9848410fab061402c85d8440c54a50dd8a0203b2ea194013ea116700a6dc1b4b26b8c5f9c9c68c1f5c6b935c5d6c737437c1911b003d9ff5445c570cd449d
625488a util: Work around (virtual) memory exhaustion on 32-bit w/ glibc (Wladimir J. van der Laan)
Tree-SHA512: 99b610a8cf9561998af90e16fc19320fddd30c987e8f33325d63df0f56d70235b94d9482e80f28154d4b33a3ecf4961686380c444ec18d1da5e8804a8b6f4de1
The number of arguments is not checked MutateTxAddOutAddr(..), meaning
that
> ./bitcoin-tx -create outaddr=
accessed the vStrInputParts vector beyond its bounds.
This also includes work by jnewbery to check the inputs for
MutateTxAddPubKey()
011124a Update benchmarking with package statistics (Suhas Daftuar)
42cd8c8 Add benchmarking for CreateNewBlock (Suhas Daftuar)
eed816a Mining: return early when block is almost full (Suhas Daftuar)
Tree-SHA512: c0d8f71e4e0441acf3f4ca12f8705e413b59b323659346a447145653def71710537fb4c6d80cad8e36d68b0aabf19c92e9eab7135a8897b053ed58720856cdda
glibc-specific: On 32-bit systems set the number of arenas to 1. By
default, since glibc 2.10, the C library will create up to two heap
arenas per core. This is known to cause excessive virtual address space
usage in our usage. Work around it by setting the maximum number of
arenas to 1.
4115af7 Fix rebase issue where pwalletMain was used instead of pwallet Ser./Deser. nInternalChainCounter as last element (Jonas Schnelli)
9382f04 Do not break backward compatibility during wallet encryption (Jonas Schnelli)
1df08d1 Add assertion for CanSupportFeature(FEATURE_HD_SPLIT) (Jonas Schnelli)
cd468d0 Define CWallet::DeriveNewChildKey() as private (Jonas Schnelli)
ed79e4f Optimize GetOldestKeyPoolTime(), return as soon as we have both oldest keys (Jonas Schnelli)
771a304 Make sure we set the wallets min version to FEATURE_HD_SPLIT at the very first point (Jonas Schnelli)
1b3b5c6 Slightly modify fundrawtransaction.py test (change getnewaddress() into getrawchangeaddress()) (Jonas Schnelli)
003e197 Remove FEATURE_HD_SPLIT bump TODO (Jonas Schnelli)
d9638e5 Overhaul the internal/external key derive switch (Jonas Schnelli)
1090502 Fix superfluous cast and code style nits in RPC wallet-hd.py test (Jonas Schnelli)
58e1483 CKeyPool avoid "catch (...)" in SerializationOp (Jonas Schnelli)
e138876 Only show keypoolsize_hd_internal if HD split is enabled (Jonas Schnelli)
add38d9 GetOldestKeyPoolTime: if HD & HD Chain Split is enabled, response max(oldest-internal-key, oldest-external-key) (Jonas Schnelli)
dd526c2 Don't switch to HD-chain-split during wallet encryption of non HD-chain-split wallets (Jonas Schnelli)
79df9df Switch to 100% for the HD internal keypool size (Jonas Schnelli)
bcafca1 Make sure we always generate one keypool key at minimum (Jonas Schnelli)
d0a627a Fix issue where CDataStream->nVersion was taken a CKeyPool record version (Jonas Schnelli)
9af8f00 Make sure we hand out keypool keys if HD_SPLIT is not enabled (Jonas Schnelli)
469a47b Make sure ReserveKeyFromKeyPool only hands out internal keys if HD_SPLIT is supported (Jonas Schnelli)
05a9b49 Fix wrong keypool internal size in RPC getwalletinfo help (Jonas Schnelli)
01de822 Removed redundant IsLocked() check in NewKeyPool() (Jonas Schnelli)
d59531d Immediately return setKeyPool's size if HD or HD_SPLIT is disabled or not supported (Jonas Schnelli)
02592f4 [Wallet] split the keypool in an internal and external part (Jonas Schnelli)
Tree-SHA512: 80d355d5e844b48c3163b56c788ab8b5b5285db0ceeb19858a3ef517d5a702afeca21dbae526d7b8fb4101c2a745af1d92bf557c40cf516780f17992bf678c1a
fa55853 rpc: Rename first named arg of createrawtransaction (MarcoFalke)
Tree-SHA512: f2e07183f2503344e676e08fe0fd73e995d7c6fda3fc11c64116208dec8e445f0627583dfba85014129b6f2dc7e253b9d760e57e66811272db89e9ba25ce6dbc
0fb2887 Move several relay options into the Relay help group (Jameson Lopp)
Tree-SHA512: 31fdfd8c741adb6fe6806a28955f0fbbc9360b1d8c3d8a28684794822f1b3231fffab93357357d986b81a4532c9eeabb79e5ede9378ff3ad8930ceb6588d9eb6
Unlike Qt5, the Qt4 signals implementation doesn't allow a signal to be
directly connected to a c++ lambda expression. Work around this by defining a
Callback QObject with a virtual method that can forward calls to a closure.
The Qt4 error was reported by Patrick Strateman <patrick.strateman@gmail.com>
in https://github.com/bitcoin/bitcoin/pull/10039#issuecomment-289248763
It has no business in `rpcserver.h`. Define it in the interface header
of the implementation unit `rpcblockchain` where it is defined.
Also modernize the signature to:
double GetDifficulty(const CBlockIndex* blockindex = nullptr);
(remove `extern`, replace `NULL` with `nullptr`)
4df76e2 Ensure an item exists on the rpcconsole stack before adding (Andrew Chow)
Tree-SHA512: f3fd5e70da186949aff794f6e2ba122da2145331212dcc5e0595285bee9dc3aa6b400b15e8eeec4476099965b74f46c4ef80f8ed1e05d490580167b002b9a5e7
b1f584d fix build if spaces in src dir path (Matthew Zipkin)
Tree-SHA512: 5834690c1f63b85ed04bb8ed411a94da04738534364d58bd9ee333ccff7129b2bbb710f31598c40123199e023da02c1745514294af3efdbb2c2e4c1320aded35
c4a6929 Clarify assumptions made about when BlockCheck is called (Matt Corallo)
Tree-SHA512: 2eceb0c4f06c7fd6b290b93843bda11a4b63131559c5e8226bfec84596ed4e54ee6d8f5bc9cf789a80675be8b8079cf9234c96032df306258cb2260b9d8c7825
Mempool persistence was added in
3f78562df5, and is always on. This commit
introduces a command-line parameter -persistmempool, which defaults to
true. When set to false:
- mempool.dat is not loaded when the node starts.
- mempool.dat is not written when the node stops.
Construct scoped_connection directly instead of relying on copy initialization
and move constructor. Avoids the following compile error in debian jessie:
```
In file included from /usr/include/boost/signals2/signal.hpp:21:0,
from ./util.h:29,
from ./dbwrapper.h:11,
from ./txdb.h:10,
from ./test/test_bitcoin.h:11,
from qt/test/wallettests.cpp:11:
/usr/include/boost/signals2/connection.hpp: In function ‘uint256 {anonymous}::SendCoins(CWallet&, SendCoinsDialog&, const CBitcoinAddress&, CAmount)’:
/usr/include/boost/signals2/connection.hpp:234:7: error: ‘boost::signals2::scoped_connection::scoped_connection(const boost::signals2::scoped_connection&)’ is private
scoped_connection(const scoped_connection &other);
^
qt/test/wallettests.cpp:47:6: error: within this context
});
^
```
Error reported by Pavel Janík <Pavel@Janik.cz> in
https://github.com/bitcoin/bitcoin/pull/9974#issuecomment-287550034
e141aa4 Add mallocinfo mode to `getmemoryinfo` RPC (Wladimir J. van der Laan)
Tree-SHA512: e778631765c29b3b5fb94eb66e5f50a8f108a234891bdcc4883f1e6e2fdd223f7660fad987eb2d7cbda5b800482d78adc1a309a3f6f83a84c556af43ebee2ed7
This adds a mode argument to `getmemoryinfo`. By default the output
will remain the same. However if a mode argument of `mallocinfo` is
provided the result of glibc `malloc_info` (if available) will
be returned as a string, as-is.
This is useful for tracking heap usage over time or troubleshooting
memory fragmentation issues.
d93b97f Set to nullptr after delete (practicalswift)
Tree-SHA512: 7201cef4541557ffe31f52ce7527c4b08a2ff5aa1eae5268bdfee5b4843881f8fd115257bef6d1b4dfb71166951950a912ce87aef160ca89c2ca2ae264cfab1b
d7f80b6 Rename first iterator to prevent shadowing. (Pavel Janík)
b42ff60 Fix shadowing of local variables. (Pavel Janík)
c4b60b3 Make some global variables less-global (static) (Pavel Janík)
bb2aaee Prevent -Wshadow warnings with gcc versions 4.8.5, 5.3.1 and 6.2.1. (Pavel Janík)
Tree-SHA512: 3aea4e28146c8f2a31351c6e2b0cce88b6f1e567a0ea0e6131624453e7193d0904e30d81b1439d8c69e281cf0e369b895851fb882ae48d5967b5c2e2c227404e
7759aa2 Save watch only key timestamps when reimporting keys (Russell Yanofsky)
Tree-SHA512: 433b5a78e5626fb2f3166e6c84c22eabd5239d451dc82694da95af237e034612a24f1a8bc959b7d2f2e576ce0b679be1fa4af929ebfae758c7e832056ab67061
9576b01 Enable xvfb in travis to allow running test_bitcoin-qt (Russell Yanofsky)
9e6817e Add new test_bitcoin-qt static library dependencies (Russell Yanofsky)
2754ef1 Add simple qt wallet test sending a transaction (Russell Yanofsky)
b61b34c Add braces to if statements in Qt test_main (Russell Yanofsky)
cc9503c Make qt test compatible with TestChain100Setup framework (Russell Yanofsky)
91e3035 Make test_bitcoin.cpp compatible with Qt Test framework (Russell Yanofsky)
Tree-SHA512: da491181848b8c39138e997ae5ff2df0b16eef2d9cdd0a965229b1a28d4fa862d5f1ef314a1736e5050e88858f329124d15c689659fc6e50fefde769ba24e523
a4d1c9f compat: use `unsigned int` instead of `u_int` (Wladimir J. van der Laan)
25da1ee build: cleanup: define MSG_DONTWAIT/MSG_NO_SIGNAL locally (Wladimir J. van der Laan)
c459d50 build: Probe MSG_DONTWAIT in the same way as MSG_NOSIGNAL (Wladimir J. van der Laan)
Tree-SHA512: 60d79d69439bb181465e4244aa5ddc28bbd84f69c0ca0c753956b3798c9022394e29d791bc085fe7ffb1268c64c789a57e24797daad63525bb776088188ff9ae
Avoids following error when qt is statically linked into the test binary, as on
travis:
This application failed to start because it could not find or load the Qt platform plugin "xcb"
in "".
7abe7bb Qt/Send: Give fallback fee a reasonable indent (Luke Dashjr)
3e4d7bf Qt/Send: Figure a decent warning colour from theme (Luke Dashjr)
c5adf8f [Qt] Show more significant warning if we fall back to the default fee (Jonas Schnelli)
Tree-SHA512: 9e85b5b398d7a49aaf6c42578d63750b1b7aa9cc9e84d008fe21d6c53f1ffe2fb69286a1a764e634ebca3286564615578eea0a1bc883e4b332be8306d9883d14
c85ffe6 Test transaction selection when gbt called without segwit support (Suhas Daftuar)
abe7b3d Don't require segwit in getblocktemplate for segwit signalling or mining (Suhas Daftuar)
Tree-SHA512: 172496b6d7cdf1879de1266748f2b4ed9fd2ba9ff4a1fd964d74d73c674c16d74bf01a3ba42bf25f2d69f348217c0bbf3412ac64821f222efc9de25a287a5240
Segwit's version bit will be signalled for all invocations of CreateNewBlock,
and not specifying segwit only will cause CreateNewBlock to skip transactions
with witness from being selected.
45a5aaf Only call clear on prevector if it isn't trivially destructible and don't loop in clear (Jeremy Rubin)
aaa02e7 Add prevector destructor benchmark (Jeremy Rubin)
Tree-SHA512: 52bc8163b65b71310252f2d578349d0ddc364a6c23795c5e06e101f5449f04c96cbdca41c0cffb1974b984b8e33006471137d92b8dd4a81a98e922610a94132a
4d51e9b Assert ConnectBlock block and pIndex are the same block (NicolasDorier)
972714c pow: GetNextWorkRequired never called with NULL pindexLast (Daniel Cousens)
cc44c8f ContextualCheckBlockHeader should never have pindexPrev to NULL (NicolasDorier)
Tree-SHA512: 7cc568bf9417267c335f21ec3d1505b26e56e5b3d5f4d3dbb555279489800aaa65a3bcd7bc376e274dd102912aec16ddbb18de2e2060b2667b41eb979cd9321e
b651270 util: Throw tinyformat::format_error on formatting error (Wladimir J. van der Laan)
3b092bd util: Properly handle errors during log message formatting (Wladimir J. van der Laan)
Tree-SHA512: 85e3b7afec2255fc88034187f1abd6060e9421de17ed4e3d918416f393429a99cc2c974b362099aaaff6970549df47664bea4c857c4e46acc0789663201dc541
dcf2112 Add safe flag to listunspent result (NicolasDorier)
af61d9f Add COutput::fSafe member for safe handling of unconfirmed outputs (Russell Yanofsky)
Tree-SHA512: 311edb6fa8075b3ede5b24cb8c6e5d133ccd8ac9ecafea07b604ffa812ee4f071337e31695e662d8573590a0460af20aaaeb39d49c9ea87924449ea50bdfb0b3
819b513 Add missing braces in semaphore posts in net (Matt Corallo)
e007b24 Fix shutdown hang with >= 8 -addnodes set (Matt Corallo)
Tree-SHA512: f2d7562bd5d333cd0e80562eb3b1fe329fc10ee713996e053d2ed669db6d9eb39550e0a6c6ab768cd070bfe92a5ea85e0f752470206706de196bd4a689b9bc07
Instead of having an exception propagate into the program when an
error happens while formatting a log message, just print a message to
the log.
Addresses #9423.
We previously would block waiting for a CSemaphoreGrant in
ThreadOpenAddedConnections, when we did not need to. This would
block as the posts in CConnman shutdown were both to the wrong
semaphore and in the wrong location.
RPC_INVALID_REQUEST and RPC_METHOD_NOT_FOUND are mapped internally to
HTTP error codes and should not be used for application-layer errors.
This commit adds commenting around those definitions to warn not to use
them for application errors.
On msvc14, int literal '-2147483648' is invalid, because '2147483648' is unsigned type and cant't apply minus operator to unsigned type.
To define the int literal correctly, use '-2147483647 - 1' formula that is also used to define INT_MIN in limits.h.
The fundrawtransaction() RPC was returning misleading or incorrect error
codes (for example RPC_INTERNAL_ERROR when funding the transaction
failed). This commit fixes those error codes:
- RPC_INTERNAL_ERROR should not be returned for application-level
errors, only for genuine internal errors such as corrupted data.
That error code has been replaced with RPC_WALLET_ERROR.
This commit also updates the test cases to explicitly test the error code.
The setban() RPC was returning misleading or incorrect error
codes (for example RPC_CLIENT_NODE_ALREADY_ADDED when an invalid IP
address was entered). This commit fixes those error codes:
- RPC_CLIENT_INVALID_IP_OR_SUBNET should be returned if the client
enters an invalid IP address or subnet.
This commit also updates the test cases to explicitly test the error code.
This commit also adds a testcase for trying to setban on an invalid subnet.
The removeprunedfunds() RPC was returning misleading or incorrect error
codes (for example RPC_INTERNAL_ERROR when the transaction was
not found in the wallet). This commit fixes those error codes:
- RPC_INTERNAL_ERROR should not be returned for application-level
errors, only for genuine internal errors such as corrupted data.
This error code has been replaced with RPC_WALLET_ERROR.
This commit also updates the test cases to explicitly test the error code.
RPCs in blockchain.cpp were returning misleading or incorrect error
codes (for example getblock() returning RPC_INTERNAL_ERROR when the
block had been pruned). This commit fixes those error codes:
- RPC_INTERNAL_ERROR should not be returned for application-level
errors, only for genuine internal errors such as corrupted data.
- RPC_METHOD_NOT_FOUND should not be returned in response to a
JSON request for an existing method.
Those error codes have been replaced with RPC_MISC_ERROR or
RPC_INVALID_PARAMETER as appropriate.
The bumpfee() RPC was returning misleading or incorrect error codes
(for example RPC_INVALID_ADDRESS_OR_KEY when the transaction was not
BIP125 replacable). This commit fixes those error codes:
- RPC_INVALID_ADDRESS_OR_KEY if an invalid address was provided:
- Invalid change address given
- RPC_INVALID_PARAMETER if a single (non-address/key) parameter is incorrect
- confTarget and totalFee options should not both be set.
- Invalid confTarget
- Insufficient totalFee (cannot be less than required fee)
- RPC_WALLET_ERROR for any other error
- Transaction has descendants in the wallet
- Transaction has descendants in the mempool
- Transaction has been mined, or is conflicted with a mined transaction
- Transaction is not BIP 125 replaceable
- Transaction has already been bumped
- Transaction contains inputs that don't belong to the wallet
- Transaction has multiple change outputs
- Transaction does not have a change output
- Fee is higher than maxTxFee
- New fee rate is less than the minimum fee rate
- Change output is too small.
This commit also updates the test cases to explicitly test the error code.
On msvc14, the compiler error C4146 (unary minus operator applied to unsigned type, result still unsigned) had been occured.
Use '0 - x' styled formula instead of '-x' so as to fix the error.
db07f91 Assert that what might look like a possible division by zero is actually unreachable (practicalswift)
Tree-SHA512: f1652eb37196a5b72f356503a1fbb44fb98aa8a94954ad1765f86d81ebf41a2337d4eb58c4f19937fda3752f5d2d642756e44afdbd438015b87ac20801246bff
`u_int` is not available on some platforms (not sure what standard it's
supposed to be part of), we don't use it anywhere else, and it doesn't
hurt to simply write `unsigned int` out here.
Define MSG_DONTWAIT and MSG_NO_SIGNAL in the implementation files that
use them (`net.cpp` and `netbase.cpp`), instead of compat.h which is
included all over the place.
This avoids putting them in the global namespace, as defining them as 0
is a hack that works for our specific usage, but it is not a general
solution.
Also makes sure they are defined only once so the `!defined(MSG_x)` guard can go.
Instead of the WIN32-specific workaround, detect lack of `MSG_DONTWAIT`
in the build system. This allows other platforms without `MSG_DONTWAIT`
to work too.
Setting minrelaytxfee to 0 will allow all transactions regardless of fee to enter your mempool until it reaches its size limit. However now that mempool limiting is governed by a separate incrementalrelay fee, it is an unnecessary restriction to prevent a minrelaytxfee of 0.
This a breaking API change to the prioritisetransaction RPC call which previously required exactly three arguments and now requires exactly two (hash and feeDelta). The function prioritiseTransaction is also updated.
"startingpriority" and "currentpriority" are no longer returned in the JSON information about a mempool entry. This affects getmempoolancestors, getmempooldescendants, getmempooolentry, and getrawmempool.
Remove -limitfreerelay and always enforce minRelayTxFee in the mempool (except from disconnected blocks)
Remove -relaypriority, the option was only used for the ability to allow free transactions to be relayed regardless of their priority. Both notions no longer apply.
Previously if an existing watch only key was reimported with a new timestamp,
the new timestamp would not be saved in the key metadata, and would not be used
to update the wallet nTimeFirstKey value (which could cause rescanning to start
at the wrong point and miss transactions).
Issue was pointed out by Jonas Schnelli <dev@jonasschnelli.ch> in
https://github.com/bitcoin/bitcoin/pull/9108#issuecomment-279715550
ad1ae7a Check and enable -Wshadow by default. (Pavel Janík)
9de90bb Do not shadow variables (gcc set) (Pavel Janík)
Tree-SHA512: 9517feb423dc8ddd63896016b25324673bfbe0bffa97f22996f59d7a3fcbdc2ebf2e43ac02bc067546f54e293e9b2f2514be145f867321e9031f895c063d9fb8
d678771 Wallet: Sanitise -wallet parameter (Luke Dashjr)
9756be3 Wallet/RPC: Use filename rather than CWallet pointer, for lockwallet RPCRunLater job name (Luke Dashjr)
86be48a More tightly couple EnsureWalletIsAvailable with GetWalletForJSONRPCRequest where appropriate (Luke Dashjr)
a435632 Move wallet RPC declarations to rpcwallet.h (Luke Dashjr)
ad15734 RPC: Pass on JSONRPCRequest metadata (URI/user/etc) for "help" method (Luke Dashjr)
bf8a04a Reformat touched lines with C++11 (Luke Dashjr)
2e518e3 Move nWalletUnlockTime to CWallet::nRelockTime, and name timed task unique per CWallet (Luke Dashjr)
d77ad6d RPC: Do all wallet access through new GetWalletForJSONRPCRequest (Luke Dashjr)
eca550f RPC/Wallet: Pass CWallet as pointer to helper functions (Luke Dashjr)
Tree-SHA512: bfd592da841693390e16f83b451503eb5cedb71208089aa32b3fc45e973555584a3ed7696dd239f6409324464d565dacf0f3d0e36e8e13ae6a7843848465f960
6485466 test: Report InitBlockIndex result (Wladimir J. van der Laan)
Tree-SHA512: 8e1408aa8d56ec1873190f886af24aa68b0555ec4996b2b8a5a39a51ded58c8fba5843c07881ed33ab6dcb00e62c2322bcf2a6fb8f1083f77e0d93e7295ab938
7ed143c Add test for CWalletTx::GetImmatureCredit() returning stale values. (Russell Yanofsky)
Tree-SHA512: c95088ed6dfc5a0774ddaa2fe14ac0a9ebd830922a4d77100ec3d51fdeb6df40ad97de4f2ea970ed0f4122dcc0022ee1d43ab3c7188becd7f90c1c6af0ed39b7
If InitBlockIndex fails, then it will segfault later. Same for the later
ActivateBestChain. BOOST_REQUIRE the result, so that an error will be
reported and the test case aborted.
7e6dcd9 random: Add fallback if getrandom syscall not available (Wladimir J. van der Laan)
7cad849 sanity: Move OS random to sanity check function (Wladimir J. van der Laan)
aa09ccb squashme: comment that NUM_OS_RANDOM_BYTES should not be changed lightly (Wladimir J. van der Laan)
224e6eb util: Specific GetOSRandom for Linux/FreeBSD/OpenBSD (Wladimir J. van der Laan)
Tree-SHA512: 9fd408b1316c69de86674f342339b2f89192fd317c8c036b5df4320f828fa263c7966146bfc1904c51137ee4a26e4cb0f560b2cd05e18cde4d808b9b92ad15c4
Change ScanForWalletTransactions return value so it is possible to distinguish
scans that skip reading every block (due to the nTimeFirstKey optimization)
from scans that fail while reading the chainActive.Tip() block. Return value is
now non-null in the non-failing case.
This change doesn't affect any user-visible behavior, it is only an internal
API improvement. The only code currently using the ScanForWalletTransactions
return value is in importmulti, and importmulti always calls
ScanForWalletTransactions with a pindex pointing to the first block in
chainActive whose block time is >= (nLowestTimestamp - 7200), while
ScanForWalletTransactions would only return null without reading blocks when
pindex and every block after it had a block time < (nTimeFirstKey - 7200).
These conditions could never happen at the same time because nTimeFirstKey <=
nLowestTimestamp.
I'm planning to make a more substantial API improvement in the future (making
ScanForWalletTransactions private and exposing a higher level rescan method to
RPC code), but Matt Corallo <git@bluematt.me> pointed out this odd behavior
introduced by e2e2f4c "Return errors from importmulti if complete rescans are
not successful" yesterday, so I'm following up now to get rid of badness
introduced by that merge.
Prior to this commit pindexRescan was initialized to a chainActive.Tip().
However, the value of pindexRescan set at time of initialization was never
read before pindexRescan was being set to either chainActive.Genesis()
(case 1), FindForkInGlobalIndex(chainActive, locator) (case 2) or
chainActive.Genesis() (case 3). Thus, the initialization was redundant.
This commit a.) removes the redundant initialization and b.) simplifies
this logic so that pindexRescan is initialized to chainActive.Genesis()
(case 1 and 3), and set to FindForkInGlobalIndex(chainActive, locator)
(case 2) as needed.
In the case that the branch ...
if (itInFlight != mapBlocksInFlight.end() && itInFlight->second.first == nodeid) {
... is taken, there was prior to this commit an implicit assumption that
MarkBlockAsInFlight(...) was being called with its fifth and optional
argument (pit) being present (and non-NULL).
19cafc6 test: Replace remaining sprintf with snprintf (Wladimir J. van der Laan)
0a17714 uint256: replace sprintf with HexStr and reverse-iterator (Wladimir J. van der Laan)
Tree-SHA512: 2ba1dd4d25e1cbfff4d67b2f483448aa7c34ab5c799cddd48ba5826e5fa6df425abe35e244aaf4c52db9fccfb4d2a25a14bb4597bf9d1fce95991f270da6bb26
83ac719 Change bitcoin address in RPC helpaddress to an invalid address, so people don't accidentally send coins there (like I did). (Marijn Stollenga)
Tree-SHA512: ca1163466a149d567b97efbfcfa8fdfe2d474245b4dd5a1a92555b4e87f8e99df5fee4cd79ef1ce6a98db2337846af78f37c2e6b31d02008b11fa0e151ce6590
This removes the option from the wallet to not pay a fee on "small"
transactions which spend "old" inputs.
This code is no longer worth keeping around, as almost all miners
prefer not to include transactions which pay no fee at all.
Use of `sprintf` is seen as a red flag as many of its uses are insecure.
OpenBSD warns about it while compiling, and some modern platforms, e.g.
[cloudlibc from cloudabi](https://github.com/NuxiNL/cloudlibc) don't
even provide it anymore.
Although our uses of these functions are secure, it can't hurt to
replace them anyway. There are only 3 occurences left, all in the
tests.
- Change initializeResult(int) to initializeResult(bool) to avoid
implicit type conversion.
- Use EXIT_FAILURE and EXIT_SUCCESS instead of magic numbers.
- Remove the argument from shutdownResult(int); it was called with a
constant argument.
Warnings introduced by commit e2e2f4c "Return errors from importmulti if
complete rescans are not successful" and reported by Pavel Janík
<Pavel@Janik.cz> in https://github.com/bitcoin/bitcoin/pull/9773 and
https://github.com/bitcoin/bitcoin/pull/9827
wallet/test/wallet_tests.cpp: In member function ‘void wallet_tests::rescan::test_method()’:
wallet/test/wallet_tests.cpp:377:17: warning: declaration of ‘wallet’ shadows a global declaration [-Wshadow]
CWallet wallet;
An effort to reduce the size of AppInitMain().
The removed code upgrades the location of the block files when
upgrading to 0.8. 0.8 seems to be the oldest version still in use.
If the code was compiled with newer (>=3.17) kernel headers but executed
on a system without the system call, every use of random would crash the
program. Add a fallback for that case.
Move the OS random test to a sanity check function that is called every
time bitcoind is initialized.
Keep `src/test/random_tests.cpp` for the case that later random tests
are added, and keep a rudimentary test that just calls the sanity check.
These are available in sandboxes without access to files or
devices. Also [they are safer and more straightforward](https://en.wikipedia.org/wiki/Entropy-supplying_system_calls)
to use than `/dev/urandom` as reading from a file has quite a few edge
cases:
- Linux: `getrandom(buf, buflen, 0)`. [getrandom(2)](http://man7.org/linux/man-pages/man2/getrandom.2.html)
was introduced in version 3.17 of the Linux kernel.
- OpenBSD: `getentropy(buf, buflen)`. The [getentropy(2)](http://man.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man2/getentropy.2)
function appeared in OpenBSD 5.6.
- FreeBSD and NetBSD: `sysctl(KERN_ARND)`. Not sure when this was added
but it has existed for quite a while.
Alternatives:
- Linux has sysctl `CTL_KERN` / `KERN_RANDOM` / `RANDOM_UUID`
which gives 16 bytes of randomness. This may be available
on older kernels, however [sysctl is deprecated on Linux](https://lwn.net/Articles/605392/)
and even removed in some distros so we shouldn't use it.
Add tests for `GetOSRand()`:
- Test that no error happens (otherwise `RandFailure()` which aborts)
- Test that all 32 bytes are overwritten (initialize with zeros, try multiple times)
Discussion:
- When to use these? Currently they are always used when available.
Another option would be to use them only when `/dev/urandom` is not
available. But this would mean these code paths receive less testing,
and I'm not sure there is any reason to prefer `/dev/urandom`.
Closes: #9676
3ddfe29 netbase: Do not print an error on connection timeouts through proxy (Wladimir J. van der Laan)
13f6085 netbase: Make InterruptibleRecv return an error code instead of bool (Wladimir J. van der Laan)
f6d18f5 Qt/Intro: Explain a bit more what will happen first time (Luke Dashjr)
50c5657 Qt/Intro: Storage shouldn't grow significantly with pruning enabled (Luke Dashjr)
9adb694 Qt/Intro: Move sizeWarningLabel text into C++ code (Luke Dashjr)
* Extends -dns parameter (via fNameLookup) to control these two new
parameters in addition to -addnode, -connect, and -seednode
* Moves fNameLookup assignment earlier as needed
* Changes -proxy and -onion to use Lookup() instead of LookupNumeric()
Remove "nLowestTimestamp <= chainActive.Tip()->GetBlockTimeMax()" check from
importmulti, which is always true because nLowestTimestamp is set to the
minimum of the most recent block time and all the imported key timestamps,
which is necessarily lower than the maximum block time.
e662af3 Use 2 hour grace period for key timestamps in importmulti rescans (Russell Yanofsky)
38d3e9e [qa] Extend import-rescan.py to test imports on pruned nodes. (Russell Yanofsky)
c28583d [qa] Extend import-rescan.py to test specific key timestamps (Russell Yanofsky)
8be0866 [qa] Simplify import-rescan.py (Russell Yanofsky)
- If the -maxsigcachesize parameter is set to zero, setup a minimum sized
sigcache (2 elements) rather than segfaulting.
- Handle maxsigcachesize being negative
- Handle maxsigcachesize being too large
A new AssertLockHeld(cs_wallet) call was added in commit a58370e
"Dedup nTimeFirstKey update logic" (part of PR #9108).
The lock held assertion will fail when loading prexisting wallets files from
before the #9108 merge that have watch-only keys.
Fixes a bug in AcceptBlock() in invoking CheckBlock() with incorrect
arguments, and restores a call to CheckBlock() from ProcessNewBlock()
as belt-and-suspenders.
Updates the (overspecified) tests to match behavior.
Because it is used inconsistently at least version 5.4.0 of g++ to
complains about methods that don't use override. There is two ways to go
about this: remove override from the methods having it, or add it to the
methods missing it. I chose the second.
d943491 qa: add a test to detect leaky p2p messages (Cory Fields)
8650bbb qa: Expose on-connection to mininode listeners (Matt Corallo)
5b5e4f8 qa: mininode learns when a socket connects, not its first action (Matt Corallo)
cbfc5a6 net: require a verack before responding to anything else (Cory Fields)
8502e7a net: parse reject earlier (Cory Fields)
c45b9fb net: correctly ban before the handshake is complete (Cory Fields)
66f861a Add a test for P2P inactivity timeouts (Matt Corallo)
b436f92 qa: Expose on-connection to mininode listeners (Matt Corallo)
8aaba7a qa: mininode learns when a socket connects, not its first action (Matt Corallo)
2cbd119 Disconnect peers which we do not receive VERACKs from within 60 sec (Matt Corallo)
266a811 Use MTP for importmulti "now" timestamps (Russell Yanofsky)
3cf9917 Add test to check new importmulti "now" value (Russell Yanofsky)
442887f Require timestamps for importmulti keys (Russell Yanofsky)
7179e7c qt: Periodic translations update (Wladimir J. van der Laan)
5e903a5 devtools: Handle Qt formatting characters edge-case in update-translations.py (Wladimir J. van der Laan)
7a8c251901 made this logic hard to follow. After that change, messages would
not be sent to a peer via SendMessages() before the handshake was complete, but
messages could still be sent as a response to an incoming message.
For example, if a peer had not yet sent a verack, we wouldn't notify it about
new blocks, but we would respond to a PING with a PONG.
This change makes the behavior straightforward: until we've received a verack,
never send any message other than version/verack/reject.
The behavior until a VERACK is received has always been undefined, this change
just tightens our policy.
This also makes testing much easier, because we can now connect but not send
version/verack, and anything sent to us is an error.
Prior to this change, all messages were ignored until a VERSION message was
received, as well as possibly incurring a ban score.
Since REJECT messages can be sent at any time (including as a response to a bad
VERSION message), make sure to always parse them.
Moving this parsing up keeps it from being caught in the
if (pfrom->nVersion == 0) check below.
7a8c251901 made a change to avoid getting into SendMessages() until the
version handshake (VERSION + VERACK) is complete. That was done to avoid
leaking out messages to nodes who could connect, but never bothered sending
us their version/verack.
Unfortunately, the ban tally and possible disconnect are done as part of
SendMessages(). So after 7a8c251901, if a peer managed to do something
bannable before completing the handshake (say send 100 non-version messages
before their version), they wouldn't actually end up getting
disconnected/banned. That's fixed here by checking the banscore as part of
ProcessMessages() in addition to SendMessages().
a60677e Pre-0.14.0 hardcoded seeds update (Wladimir J. van der Laan)
bfa9393 contrib/seeds: Update PATTERN_AGENT (Wladimir J. van der Laan)
4dfac2c Update seeds tooling to Python 3 (Wladimir J. van der Laan)
When importing a watch-only address over importmulti with a specific timestamp,
the wallet's nTimeFirstKey is currently set to 1. After this change, the
provided timestamp will be used and stored as metadata associated with
watch-only key. This can improve wallet performance because it can avoid the
need to scan the entire blockchain for watch only addresses when timestamps are
provided.
Also adds timestamp to validateaddress return value (needed for tests).
Fixes#9034.
Additionally, accept a "now" timestamp, to allow avoiding rescans for keys
which are known never to have been used.
Note that the behavior when "now" is specified is slightly different than the
previous behavior when no timestamp was specified at all. Previously, when no
timestamp was specified, it would avoid rescanning during the importmulti call,
but set the key's nCreateTime value to 1, which would not prevent future block
reads in later ScanForWalletTransactions calls. With this change, passing a
"now" timestamp will set the key's nCreateTime to the current block time
instead of 1.
Fixes#9491
These are (afaik) all long-standing races or concurrent accesses. Going
forward, we can clean these up so that they're not all individual atomic
accesses.
- Reintroduce cs_vRecv to guard receive-specific vars
- Lock vRecv/vSend for CNodeStats
- Make some vars atomic.
- Only set the connection time in CNode's constructor so that it doesn't change
Minimum boost version was bumped to 1.47.0 in #8920, which
means the configure step won't even pass with older boost.
This version has boost filesystem v3, which means the
(crappy) fallbacks for older versions can go.
If a timeout happens while reading the proxy response, this effectively
means we timed out while connecting to the remote node. This is very
common for Tor, so do not print an error message.
a9baa6d Bugfix: Qt/Intro: Pruned nodes never require *more* space (Luke Dashjr)
93ffba7 Bugfix: Qt/Intro: Chain state needs to be stored even with the full blockchain (Luke Dashjr)
c8cee26 Qt/Intro: Update block chain size (Luke Dashjr)
618ee92 Further-enforce lockordering by enforcing directly after TRY_LOCKs (Matt Corallo)
2a962d4 Fixup style a bit by moving { to the same line as if statements (Matt Corallo)
8465631 Always enforce lock strict lock ordering (try or not) (Matt Corallo)
fd13eca Lock cs_vSend and cs_inventory in a consistent order even in TRY (Matt Corallo)
The initialization order of global data structures in different
implementation units is undefined. Making use of this is essentially
gambling on what the linker does, the so-called [Static initialization
order fiasco](https://isocpp.org/wiki/faq/ctors#static-init-order).
In this case it apparently worked on Linux but failed on OpenBSD and
FreeBSD.
To create it on first use, make the registration structure local to
a function.
Fixes#8910.
6dbfe08 [qa] test signrawtransaction merge with missing inputs (Matt Corallo)
ec4f7e4 [qa] Add second input to signrawtransaction test case (Matt Corallo)
691710a [qa] Test that decoderawtransaction throws with extra data appended (Matt Corallo)
922bea9 Better handle invalid parameters to signrawtransaction (Matt Corallo)
7ea0ad5 Fail in DecodeHexTx if there is extra data at the end (Matt Corallo)
0729102 Net: pass interruptMsgProc as const where possible (Jorge Timón)
fc7f2ff Net: Make CNetMsgMaker more const (Jorge Timón)
d45955f Net: CConnman: Make some methods const (Jorge Timón)
Easier to understand what the button does (it resets the graph view).
'Clear' might mean that the graph is emptied and stops updating, whereas
its easier to see that you're just starting fresh with 'Reset'.
08bb6f4 net: log an error rather than asserting if send version is misused (Cory Fields)
7a8c251 net: Disallow sending messages until the version handshake is complete (Cory Fields)
12752af net: don't run callbacks on nodes that haven't completed the version handshake (Cory Fields)
2046617 net: deserialize the entire version message locally (Cory Fields)
80ff034 Dont deserialize nVersion into CNode, should fix#9212 (Matt Corallo)
Preserve comment, order form, and account strings from the original wallet
transaction. Also set fTimeReceivedIsTxTime and fFromMe fields for consistency
with CWallet::CreateTransaction. The latter two fields don't influence current
wallet behavior, but do record that the transaction originated in the wallet
instead of coming from the network or sendrawtransaction.
This silently skips trying to merge signatures from inputs which
do not exist from transactions provided to signrawtransaction,
instead of hitting an assert.
Since ForEach* are can be used to send messages to all nodes, the caller may
end up sending a message before the version handshake is complete. To limit
this, filter out these nodes. While we're at it, may as well filter out
disconnected nodes as well.
Delete unused methods rather than updating them.
This avoids having some vars set if the version negotiation fails.
Also copy it all into CNode at the same site. nVersion and
fSuccessfullyConnected are set last, as they are the gates for the other vars.
Make them atomic for that reason.
Once the CNode has been added to vNodes, it is possible that it is
disconnected+deleted in the socket handler thread. However, after
that we now call InitializeNode, which accesses the pnode.
helgrind managed to tickle this case (somehow), but I suspect it
requires in immensely braindead scheduler.
More accurate than simply adding one byte per input, and properly handles the
case where the original transaction happened to have very small signatures
2366180 Do not add to vNodes until fOneShot/fFeeler/fAddNode have been set (Matt Corallo)
3c37dc4 Ensure cs_vNodes is held when using the return value from FindNode (Matt Corallo)
5be0190 Delete some unused (and broken) functions in CConnman (Matt Corallo)
4b189c1 Change bumpfee result value from 'oldfee' to 'origfee'. (Alex Morcos)
0c0c63f Introduce WALLET_INCREMENTAL_RELAY_FEE (Alex Morcos)
e8021ec Use CWallet::GetMinimumFee in bumpfee (Alex Morcos)
ae9719a Refactor GetMinimumFee to give option of providing targetFee (Alex Morcos)
fe8e8ef [rpc] Add incremental relay fee to getnetworkinfo (Alex Morcos)
6b331e6 Fix to have miner test aware of new separate block min tx fee (Alex Morcos)
de6400d Fix missing use of dustRelayFee (Alex Morcos)
5b15870 Use incrementalRelayFee for BIP 125 replacement (Alex Morcos)
The result value indicates the actual fee on the transaction that was replaced. But there is an error message which uses the description 'oldfee' to refer to the original fee rate applied to the new transaction's estimated max size. It was confusing that two different uses of 'oldfee' had two different numeric values.
Have wallet's default bump value be higher than the default incrementalRelayFee to future proof against changes to incremental relay fee. Only applies when not setting the fee rate directly.
Use the wallet's fee calculation logic to properly clamp fee against minimums and maximums when calculating the fee for a bumpfee transaction. Unless totalFee is explictly given, in which case, manually check against min, but do nothing to adjust given fee.
In all cases do a final check against maxTxFee (after adding any incremental amount).
Before this commit, the checkbox would always start off unchecked. After this
commit it will respect the -walletrbf setting (which is currently false by
default).
The use of mocktime in test logic means that comparisons between
GetTime() and GetTimeMicros()/1000000 are unreliable since the former
can use mocktime values while the latter always gets the system clock;
this changes the networking code's inactivity checks to consistently
use the system clock for inactivity comparisons.
Also remove some hacks from setmocktime() that are no longer needed,
now that we're using the system clock for nLastSend and nLastRecv.
094e4b3 Better document usage of SyncTransaction (Alex Morcos)
4afbde6 Introduce MemPoolConflictRemovalTracker (Alex Morcos)
ff25c32 mempool: add notification for added/removed entries (Wladimir J. van der Laan)
Analogue to ConnectTrace that tracks transactions that have been removed from the mempool due to conflicts and then passes them through SyncTransaction at the end of its scope.
Add notification signals to make it possible to subscribe to mempool
changes:
- NotifyEntryAdded(CTransactionRef)>
- NotifyEntryRemoved(CTransactionRef, MemPoolRemovalReason)>
Also add a mempool removal reason enumeration, which is passed to the
removed notification based on why the transaction was removed from
the mempool.
7ba0a00 Testing: listsinceblock should not use orphan block height. (Karl-Johan Alm)
ee5c1ce Bug-fix: listsinceblock: use closest common ancestor when a block hash was provided for a chain that was not the main chain. (Karl-Johan Alm)
Prior to this commit the err variable was not guaranteed to be set before
the check ...
BOOST_CHECK_MESSAGE(err != SCRIPT_ERR_OK, ScriptErrorString(err));
This adds a comment to the new logic for setting HB peers based
on block validation (and aligns the code below to reflect the comment).
It's not obvious why we're checking mapBlocksInFlight. Add a comment to
explain.
The additional initializer is for the named arguments, which are unused
in the test (and unfilled global fields will be initialized to 0
anyhow), so this is a no-op apart from the warning.
c9f3062 Add fundrawtransactions new reserveChangeKey option to the release notes (Jonas Schnelli)
9eb325d [QA] Add test for fundrawtransactions new reserveChangeKey option (Jonas Schnelli)
9aa4e6a [Wallet] Add an option to keep the change address key, true by default (Jonas Schnelli)
The old Bitcoin alert system has long since been retired.
( See also: https://bitcoin.org/en/alert/2016-11-01-alert-retirement )
This change causes each node to send any old peers that
it connects with a copy of the final alert.
The alert it hardcode cancels all other alerts including
other final alerts.
376b3c2 Make the cs_sendProcessing a LOCK instead of a TRY_LOCK (Matt Corallo)
d7c58ad Split CNode::cs_vSend: message processing and message sending (Matt Corallo)
This command allows a user to increase the fee on a wallet transaction T, creating a "bumper" transaction B.
T must signal that it is BIP-125 replaceable.
T's change output is decremented to pay the additional fee. (B will not add inputs to T.)
T cannot have any descendant transactions.
Once B bumps T, neither T nor B's outputs can be spent until either T or (more likely) B is mined.
Includes code by @jonasschnelli and @ryanofsky
This forces the message handling thread to make another full
iteration of SendMessages prior to going back to sleep, ensuring
we announce the new block to all peers before sleeping.
4b06e41 Add unit test for FindEarliestAtLeast (Suhas Daftuar)
997a98a Replace FindLatestBefore used by importmuti with FindEarliestAtLeast. (Gregory Maxwell)
02ee4eb Make most_recent_compact_block a pointer to a const (Matt Corallo)
73666ad Add comment to describe callers to ActivateBestChain (Matt Corallo)
962f7f0 Call ActivateBestChain without cs_main/with most_recent_block (Matt Corallo)
0df777d Use a temp pindex to avoid a const_cast in ProcessNewBlockHeaders (Matt Corallo)
c1ae4fc Avoid holding cs_most_recent_block while calling ReadBlockFromDisk (Matt Corallo)
9eb67f5 Ensure we meet the BIP 152 old-relay-types response requirements (Matt Corallo)
5749a85 Cache most-recently-connected compact block (Matt Corallo)
9eaec08 Cache most-recently-announced block's shared_ptr (Matt Corallo)
c802092 Relay compact block messages prior to full block connection (Matt Corallo)
6987219 Add a CValidationInterface::NewPoWValidBlock callback (Matt Corallo)
180586f Call AcceptBlock with the block's shared_ptr instead of CBlock& (Matt Corallo)
8baaba6 [qa] Avoid race in preciousblock test. (Matt Corallo)
9a0b2f4 [qa] Make compact blocks test construction using fetch methods (Matt Corallo)
8017547 Make CBlockIndex*es in net_processing const (Matt Corallo)
Technically cs_sendProcessing is entirely useless now because it
is only ever taken on the one MessageHandler thread, but because
there may be multiple of those in the future, it is left in place
cs_vSend is used for two purposes - to lock the datastructures used
to queue messages to place on the wire and to only call
SendMessages once at a time per-node. I believe SendMessages used
to access some of the vSendMsg stuff, but it doesn't anymore, so
these locks do not need to be on the same mutex, and also make
deadlocking much more likely.
e60360e net: remove cs_vRecvMsg (Cory Fields)
991955e net: add a flag to indicate when a node's send buffer is full (Cory Fields)
c6e8a9b net: add a flag to indicate when a node's process queue is full (Cory Fields)
4d712e3 net: add a new message queue for the message processor (Cory Fields)
c5a8b1b net: rework the way that the messagehandler sleeps (Cory Fields)
c72cc88 net: remove useless comments (Cory Fields)
ef7b5ec net: Add a simple function for waking the message handler (Cory Fields)
f5c36d1 net: record bytes written before notifying the message processor (Cory Fields)
60befa3 net: handle message accounting in ReceiveMsgBytes (Cory Fields)
56212e2 net: set message deserialization version when it's actually time to deserialize (Cory Fields)
0e973d9 net: remove redundant max sendbuffer size check (Cory Fields)
6042587 net: wait until the node is destroyed to delete its recv buffer (Cory Fields)
f6315e0 net: only disconnect if fDisconnect has been set (Cory Fields)
5b4a8ac net: make GetReceiveFloodSize public (Cory Fields)
e5bcd9c net: make vRecvMsg a list so that we can use splice() (Cory Fields)
53ad9a1 net: fix typo causing the wrong receive buffer size (Cory Fields)
This disentangles the script validation skipping from checkpoints.
A new option is introduced "assumevalid" which specifies a block whos
ancestors we assume all have valid scriptsigs and so we do not check
them when they are also burried under the best header by two weeks
worth of work.
Unlike checkpoints this has no influence on consensus unless you set
it to a block with an invalid history. Because of this it can be
easily be updated without risk of influencing the network consensus.
This results in a massive IBD speedup.
This approach was independently recommended by Peter Todd and Luke-Jr
since POW based signature skipping (see PR#9180) does not have the
verifiable properties of a specific hash and may create bad incentives.
The downside is that, like checkpoints, the defaults bitrot and older
releases will sync slower. On the plus side users can provide their
own value here, and if they set it to something crazy all that will
happen is more time will be spend validating signatures.
Checkblocks and checklevel are also moved to the hidden debug options:
Especially now that checkblocks has a low default there is little need
to change these settings, and users frequently misunderstand them as
influencing security or IBD speed. By hiding them we offset the
space added by this new option.
vRecvMsg is now only touched by the socket handler thread.
The accounting vars (nRecvBytes/nLastRecv/mapRecvBytesPerMsgCmd) are also
only used by the socket handler thread, with the exception of queries from
rpc/gui. These accesses are not threadsafe, but they never were. This needs to
be addressed separately.
Also, update comment describing data flow
Similar to the recv flag, but this one indicates whether or not the net's send
buffer is full.
The socket handler checks the send queue when a new message is added and pauses
if necessary, and possibly unpauses after each message is drained from its buffer.
Messages are dumped very quickly from the socket handler to the processor, so
it's the depth of the processing queue that's interesting.
The socket handler checks the process queue's size during the brief message
hand-off and pauses if necessary, and the processor possibly unpauses each time
a message is popped off of its queue.
In order to sleep accurately, the message handler needs to know if _any_ node
has more processing that it should do before the entire thread sleeps.
Rather than returning a value that represents whether ProcessMessages
encountered a message that should trigger a disconnnect, interpret the return
value as whether or not that node has more work to do.
Also, use a global fProcessWake value that can be set by other threads,
which takes precedence (for one cycle) over the messagehandler's decision.
Note that the previous behavior was to only process one message per loop
(except in the case of a bad checksum or invalid header). That was changed in
PR #3180.
The only change here in that regard is that the current node now falls to the
back of the processing queue for the bad checksum/invalid header cases.
In spite of the name FindLatestBefore used std::lower_bound to try
to find the earliest block with a nTime greater or equal to the
the requested value. But lower_bound uses bisection and requires
the input to be ordered with respect to the comparison operation.
Block times are not well ordered.
I don't know what lower_bound is permitted to do when the data
is not sufficiently ordered, but it's probably not good.
(I could construct an implementation which would infinite loop...)
To resolve the issue this commit introduces a maximum-so-far to the
block indexes and searches that.
For clarity the function is renamed to reflect what it actually does.
An issue that remains is that there is no grace period in importmulti:
If a address is created at time T and a send is immediately broadcast
and included by a miner with a slow clock there may not yet have been
any block with at least time T.
The normal rescan has a grace period of 7200 seconds, but importmulti
does not.
0c50909 testcases: explicitly specify transaction version 1 (John Newbery)
b7e144b Add test cases to test new bitcoin-tx functionality (jnewbery)
61a1534 Add all transaction output types to bitcoin-tx. (jnewbery)
1814b08 add p2sh and segwit options to bitcoin-tx outscript command (Stanislas Marion)
There is still a call to ActivateBestChain with cs_main if a peer
requests the block prior to it being validated, but this one is
more specifically-gated, so should be less of an issue.
AcceptToMemoryPool has several classes of return false statements.
- return state.Invalid or state.DoS directly itself
- return false and set fMissingInputs (state is valid)
- return false and state is set by failed CheckTransaction
- return false and state is set by failed CheckInputs.
This commit patches the last case where the state variable was reused for additional calls to CheckInputs to identify witness stripping as cause of validation failure. After this commit, it should be the case that if !fMissingInputs, state is always Invalid if AcceptToMemoryPool returns false.
4e7e2e1 Update RPC argument names (John Newbery)
481f289 rpc: Named argument support for bitcoin-cli (Wladimir J. van der Laan)
9adb4e1 rpc: Argument name consistency (Wladimir J. van der Laan)
8d713f7 rpc: Named arguments for rawtransaction calls (Wladimir J. van der Laan)
37a166f rpc: Named arguments for wallet calls (Wladimir J. van der Laan)
78b684f rpc: Named arguments for mining calls (Wladimir J. van der Laan)
b8ebc59 rpc: Named arguments for net calls (Wladimir J. van der Laan)
2ca9dcd test: Add test for RPC named arguments (Wladimir J. van der Laan)
fba1a61 rpc: Named arguments for misc calls (Wladimir J. van der Laan)
286ec08 rpc: Add 'echo' call for testing (Wladimir J. van der Laan)
495eb44 rpc: Named arguments for blockchain calls (Wladimir J. van der Laan)
6f1c76a rpc: Support named arguments (Wladimir J. van der Laan)
5865d41 authproxy: Add support for RPC named arguments (Wladimir J. van der Laan)
5113474 wallet: Use CDataStream.data() (Wladimir J. van der Laan)
e2300ff bench: Use CDataStream.data() (Wladimir J. van der Laan)
adff950 dbwrapper: Use new .data() method of CDataStream (Wladimir J. van der Laan)
a2141e4 streams: Remove special cases for ancient MSVC (Wladimir J. van der Laan)
af4c44c streams: Add data() method to CDataStream (Wladimir J. van der Laan)
20449ef Don't overpay fee if we have selected new coins that result in a smaller transaction. (Alex Morcos)
42f5ce4 Try to reduce change output to make needed fee in CreateTransaction (Alex Morcos)
032ba3f RPC help documentation for addnode peerinfo. (Gregory Maxwell)
90f13e1 Add release notes for addnode changes. (Gregory Maxwell)
50bd12c Break addnode out from the outbound connection limits. (Gregory Maxwell)
On repeated calls to SelectCoins we try to meet the fee necessary for the last transaction, the new fee required might be smaller, so increase our change by the difference if we can.
Once we've picked coins and dummy-signed the transaction to calculate fee, if we don't have sufficient fee, then try to meet the fee by reducing change before resorting to picking new coins.
Previously addnodes were in competition with outbound connections
for access to the eight outbound slots.
One result of this is that frequently a node with several addnode
configured peers would end up connected to none of them, because
while the addnode loop was in its two minute sleep the automatic
connection logic would fill any free slots with random peers.
This is particularly unwelcome to users trying to maintain links
to specific nodes for fast block relay or purposes.
Another result is that a group of nine or more nodes which are
have addnode configured towards each other can become partitioned
from the public network.
This commit introduces a new limit of eight connections just for
addnode peers which is not subject to any of the other connection
limitations (including maxconnections).
The choice of eight is sufficient so that under no condition would
a user find themselves connected to fewer addnoded peers than
previously. It is also low enough that users who are confused
about the significance of more connections and have gotten too
copy-and-paste happy will not consume more than twice the slot
usage of a typical user.
Any additional load on the network resulting from this will likely
be offset by a reduction in users applying even more wasteful
workaround for the prior behavior.
The retry delays are reduced to avoid nodes sitting around without
their added peers up, but are still sufficient to prevent overly
aggressive repeated connections. The reduced delays also make
the system much more responsive to the addnode RPC.
Ban-disconnects are also exempted for peers added via addnode since
the outbound addnode logic ignores bans. Previously it would ban
an addnode then immediately reconnect to it.
A minor change was also made to CSemaphoreGrant so that it is
possible to re-acquire via an object whos grant was moved.
Performing signing in the inner loop has terrible performance
when many passes through are needed to complete the selection.
Signing before the algorithm is complete also gets in the way
of correctly setting the fee (e.g. preventing over-payment when
the fee required goes down on the final selection.)
Use of the dummy might overpay on the signatures by a couple bytes
in uncommon cases where the signatures' DER encoding is smaller
than the dummy: Who cares?
In order to do this, we must call ActivateBestChain prior to
responding getdata requests for blocks which we announced using
compact blocks.
For getheaders responses we dont need code changes, but do note
that we must reset the bestHeaderSent so that the SendMessages call
re-announces the header in question.
While we could do something smarter for getblocks, calling
ActivateBestChain is simple and more obviously correct, instead of
doing something more similar to getheaders.
See-also the BIP clarifications at
https://github.com/bitcoin/bips/pull/486
The meaning is clear from the context, and we're inconsistent here.
Also save typing when using named arguments.
- `bitcoinaddress` -> `address`
- `bitcoinprivkey` -> `privkey`
- `bitcoinpubkey` -> `pubkey`
The [JSON-RPC specification](http://www.jsonrpc.org/specification) allows passing parameters as an Array, for by-position
arguments, or an Object, for by-name arguments.
This implements by-name arguments, but preserves full backwards compatibility. API using by-name arguments are
easier to extend, and easier to use (no need to guess which argument goes where).
Named are mapped to positions by a per-call structure, provided through the RPC command table.
Missing arguments will be replaced by null, except if at the end, then the argument is left out completely.
Currently calls fail (though not crash) on intermediate nulls, but this should be improved on a per-call basis later.
05a55a6 Added EVENT_CFLAGS to test makefile to explicitly include libevent headers. (Karl-Johan Alm)
280a559 Added some simple tests for the RAII-style events. (Karl-Johan Alm)
7f7f102 Switched bitcoin-cli.cpp to use RAII unique pointers with deleters. (Karl-Johan Alm)
e5534d2 Added std::unique_ptr<> wrappers with deleters for libevent modules. (Karl-Johan Alm)
Make a more conservative notion of whether the node is caught up to the rest of the network and only count transactions as fee estimation data points if the node is caught up.
All decisions about whether the transactions are valid data points are made at the time the transaction arrives. Updating on blocks all the time will now cause stale fee estimates to decay quickly when we restart a node.
Fee estimation can just check its own mapMemPoolTxs to determine the same information. Note that now fee estimation for block processing must happen before those transactions are removed, but this shoudl be a speedup.
This was an oversight, where blocks and mempool tracking were ignored during IBD, but transactions that arrived during IBD but were included in blocks after IBD were not ignored.
Once priority estimation was removed, not all transactions in the mempool are tracked in the fee estimation mempool tracking. So there is no error if a transaction is not found for removal.
We were marking coins FRESH before being sure they were not overwriting dirty undo data. This condition was never reached in existing code because undo data was always flushed before UpdateCoins was called with new transactions, but could have been exposed in an otherwise safe refactor.
Clarify in the comments the assumptions made in ModifyNewCoins.
Add ability to undo transactions to UpdateCoins unit test.
Thanks to Russ Yanofsky for suggestion on how to make logic clearer and fixing up the ccoins_modify_new test cases.
Surprisingly this hasn't been causing me any issues while testing, probably
because it requires lots of large blocks to be flying around.
Send/Recv corks need tests!
f8d43b8 Avoid rollingMinimumFeeRate never being able to decay below half (Alex Morcos)
eab8e1b fix a bug if the min fee is 0 for FeeFilterRounder (Alex Morcos)
- Drop the interruption point directly after the pnode allocation. This would
be leaky if hit.
- Rearrange thread creation so that the socket handler comes first
5394b39 Wallet: Split main logic from InitLoadWallet into CreateWalletFromFile (Luke Dashjr)
fb0c934 Wallet: Let the interval-flushing thread figure out the filename (Luke Dashjr)
8562792 GUI/RPCConsole: Include importmulti in history sensitive-command filter (Luke Dashjr)
ff77faf Qt/RPCConsole: Use RPCParseCommandLine to perform command filtering (Luke Dashjr)
a79598d Qt/Test: Make sure filtering sensitive data works correctly in nested commands (Luke Dashjr)
629cd42 Qt/RPCConsole: Teach RPCParseCommandLine how to filter out arguments to sensitive commands (Luke Dashjr)
e2d9213 Qt/RPCConsole: Make it possible to parse a command without executing it (Luke Dashjr)
1755c04 Qt/RPCConsole: Truncate filtered commands to just the command name, rather than skip it entirely in history (Luke Dashjr)
d80a006 Qt/RPCConsole: Add signmessagewithprivkey to list of commands filtered from history (Luke Dashjr)
afde12f Qt/RPCConsole: Refactor command_may_contain_sensitive_data function out of RPCConsole::on_lineEdit_returnPressed (Luke Dashjr)
de8980d Bugfix: Do not add sensitive information to history for real (Luke Dashjr)
9044908 Qt/RPCConsole: Don't store commands with potentially sensitive information in the history (Jonas Schnelli)
fc95daa Qt/RPCConsole: Save current command entry when browsing history (Jonas Schnelli)
This commit add testcases to test the following functions in bitcoin-tx:
- add a pay to non-standard script output
- add a P2SH output
- add a P2WSH output
- add a P2WSH wrapped in a P2SH output
- add a pay to pub key output
- add a P2WPKH output
- add a P2WPKH wrapped in a P2SH output
- add a bare multisig output
- add a multisig in P2SH output
- add a multisig in a P2WSH output
- add a multisig in a P2WSH wrapped in as P2SH output
This commit enhances bitcoin-tx so all remaining standard TXO types can be created:
- Pay to Pub Key
- Multi-sig
- bare multi-sig
- multi-sig in Pay To Script Hash
- multi-sig in Pay to Witness Script Hash
- multi-sig in Pay to Witness Script Hash, wrapped in P2SH
- Pay to Witness Pub Key Hash
- Pay to Witness Pub Key Hash, wrapped in P2SH
- Pay to Witness Script Hash
- Pay to Witness Script Hash, wrapped in P2SH
If the mempool is not completely full, treat the difference between
the maximum size and the actual usage as available for the coin cache.
This also changes the early flush trigger from (usage > 0.9 * space)
to (usage > 0.9 * space && usage > space - 100MB). This means we're not
permanently leaving 10% of the space unused when the space is large.
cee1612 reduce number of lookups in TransactionWithinChainLimit (Gregory Sanders)
af9bedb Test for fix of txn chaining in wallet (Gregory Sanders)
5882c09 CreateTransaction: Don't return success with too-many-ancestor txn (Gregory Sanders)
0b2294a SelectCoinsMinConf: Prefer coins with fewer ancestors (Gregory Sanders)
749be01 Move GetWarnings() into its own file. (Gregory Maxwell)
e3ba0ef Eliminate data races for strMiscWarning and fLargeWork*Found. (Gregory Maxwell)
c63198f Make QT runawayException call GetWarnings instead of directly access strMiscWarning. (Gregory Maxwell)
813ede9 [qa] Update compactblocks test for multi-peer reconstruction (Suhas Daftuar)
7017298 Allow compactblock reconstruction when block is in flight (Suhas Daftuar)
Defers to pre-defined version if found (e.g. protobuf). For protobuf case, the definitions are identical and thus include order should not affect results.
c5c92c4 Update python tests for default tx version=2 (BtcDrak)
dab207e Preserve tx version=1 for certain tests (BtcDrak)
c5d746a tiny test fix for mempool_tests (Alex Morcos)
1f0ca1a Bump default transaction version to 2 (BtcDrak)
67dac4e Add unit tests for the CuckooCache (Jeremy Rubin)
c9e69fb Add CuckooCache implementation and replace the sigcache map_type with it (Jeremy Rubin)
SQUASHME: Change cuckoocache to only work for powers of two, to avoid mod operator
SQUASHME: Update Documentation and simplify logarithm logic
SQUASHME: OSX Build Errors
SQUASHME: minor Feedback from sipa + bluematt
SQUASHME: DOCONLY: Clarify a few comments.
This change removes a mapValue.erase("version") statement which deletes a
mapValue entry that never existed. The statement was mistakenly added in commit
865c3a2383 in 2010 and is harmless but confusing.
8225239 Merge #433: Make the libcrypto detection fail the newer API.
12de863 Make the libcrypto detection fail the newer API.
2928420 Merge #427: Remove Schnorr from travis as well
8eecc4a Remove Schnorr from travis as well
a8abae7 Merge #310: Add exhaustive test for group functions on a low-order subgroup
b4ceedf Add exhaustive test for verification
83836a9 Add exhaustive tests for group arithmetic, signing, and ecmult on a small group
20b8877 Add exhaustive test for group functions on a low-order subgroup
80773a6 Merge #425: Remove Schnorr experiment
e06e878 Remove Schnorr experiment
04c8ef3 Merge #407: Modify parameter order of internal functions to match API parameter order
6e06696 Merge #411: Remove guarantees about memcmp-ability
40c8d7e Merge #421: Update scalar_4x64_impl.h
a922365 Merge #422: Restructure nonce clearing
3769783 Restructure nonce clearing
0f9e69d Restructure nonce clearing
9d67afa Update scalar_4x64_impl.h
7d15cd7 Merge #413: fix auto-enabled static precompuatation
00c5d2e fix auto-enabled static precompuatation
91219a1 Remove guarantees about memcmp-ability
353c1bf Fix secp256k1_ge_set_table_gej_var parameter order
541b783 Fix secp256k1_ge_set_all_gej_var parameter order
7d893f4 Fix secp256k1_fe_inv_all_var parameter order
git-subtree-dir: src/secp256k1
git-subtree-split: 8225239f490f79842a5a3b82ad6cc8aa11d5208e
1a6eacb [QA] add fundrawtransaction test on a locked wallet with empty keypool (Jonas Schnelli)
c24a4f5 [Wallet] Bugfix: FRT: don't terminate when keypool is empty (Jonas Schnelli)
f36349e qt: Remove on_toggleNetworkActiveButton_clicked from RPCConsole (Wladimir J. van der Laan)
297cc20 qt: layoutAboutToChange signal is called layoutAboutToBeChanged (Wladimir J. van der Laan)
This resolves an issue where a wallet transaction which failed to
relay previously because it couldn't make it into the mempool
will not try again until restart, even though mempool conditions
may have changed.
Abandoned and known-conflicted transactions are skipped.
Some concern was expressed that there may be users with many
unknown conflicts would waste a lot of CPU time trying to
add them to their memory pools over and over again. But I am
doubtful these users exist in any number, if they do exist
they have worse problems, and they can mitigate any performance
issue this might have by abandoning the transactions in question.
This is another violation of the one definition rule, as the type
for mapOrphanTransactionsByPrev did not match the one in
net_processing.cpp anymore. As it now depends on a custom Iterator,
it seems too much hassle to correctly expose it to the tests.
Instead, this commit just removes the one test it was referenced in.
Add more comprehensive unit tests for CCoinsViewCache. Right now it is hard to
refactor caching code or fix bugs in the caching logic because you have to try
to mentally enumerate all the different states the cache might be in to make
sure a change doesn't cause unintended consequences. The new tests explicitly
enumerate relevant cache states, documenting and verifying the behavior in each
state, so it will be safer and easier to make changes to the caching code in
the future.
dd0df81 Document ConnectBlock connectTrace postconditions (Matt Corallo)
2d6e561 Switch pblock in ProcessNewBlock to a shared_ptr (Matt Corallo)
2736c44 Make the optional pblock in ActivateBestChain a shared_ptr (Matt Corallo)
ae4db44 Create a shared_ptr for the block we're connecting in ActivateBCS (Matt Corallo)
fd9d890 Keep blocks as shared_ptrs, instead of copying txn in ConnectTip (Matt Corallo)
6fdd43b Add struct to track block-connect-time-generated info for callbacks (Matt Corallo)
81e3228 Make CTransaction actually immutable (Pieter Wuille)
42fd8de Make DecodeHexTx return a CMutableTransaction (Pieter Wuille)
c3f5673 Make CWalletTx store a CTransactionRef instead of inheriting (Pieter Wuille)
a188353 Switch GetTransaction to returning a CTransactionRef (Pieter Wuille)
042f9fa qt: Show progress overlay when clicking spinner icon (Wladimir J. van der Laan)
827d9a3 qt: Replace NetworkToggleStatusBarControl with generic ClickableLabel (Wladimir J. van der Laan)
76faa3c Rename the remaining main.{h,cpp} to validation.{h,cpp} (Matt Corallo)
e736772 Move network-msg-processing code out of main to its own file (Matt Corallo)
87c35f5 Remove orphan state wipe from UnloadBlockIndex. (Matt Corallo)
Sorry for the churn on this, but the current message (introduced in #9073)
isn't acceptable:
$ src/bitcoin-cli getinfo
rpc: couldn't connect to server
(make sure server is running and you are connecting to the correct RPC port: -1 unknown)
Putting the error code after the words "RPC port" made me wonder whether
there was a port configuration issue.
This changes it to:
$ src/bitcoin-cli getinfo
error: couldn't connect to server: unknown (code -1)
(make sure server is running and you are connecting to the correct RPC port)
As orphan state is now "network state", like in
d6ea737be1,
UnloadBlockIndex is only used during init if we end up reindexing
to clear our block state so that we can start over. However, at
that time no connections have been brought up as CConnman hasn't
been started yet, so all of the network processing state logic is
empty when its called.
2c8c57e Document cs_main status when calling into PNB or PNBH (Matt Corallo)
58a215c Use ProcessNewBlockHeaders in CMPCTBLOCK processing (Matt Corallo)
a8b936d Use exposed ProcessNewBlockHeaders from ProcessMessages (Matt Corallo)
63fd101 Split ::HEADERS processing into two separate cs_main locks (Matt Corallo)
4a6b1f3 Expose AcceptBlockHeader through main.h (Matt Corallo)
This was misnamed, resulting in a warning message and missing
functionality. I'm not sure what the change in behavior will be here,
this needs testing.
Also remove connection to non-existing slot "test".
This was used for testing if the signal arrived. It is no
longer necessary.
Fixes:
2016-12-01 10:04:06 GUI: QObject::connect: No such signal PeerTableModel::layoutAboutToChange() in qt/rpcconsole.cpp:518
2016-12-01 10:04:06 GUI: QObject::connect: (receiver name: 'RPCConsole')
2016-12-01 10:04:06 GUI: QObject::connect: No such slot RPCConsole::test() in qt/rpcconsole.cpp:781
2016-12-01 10:04:06 GUI: QObject::connect: (receiver name: 'RPCConsole')
deec83f init: Get rid of fServer flag (Wladimir J. van der Laan)
16ca0bf init: Try to aquire datadir lock before and after daemonization (Wladimir J. van der Laan)
0cc8b6b init: Split up AppInit2 into multiple phases (Wladimir J. van der Laan)
Before daemonization, just probe the data directory lock and print an
early error message if possible.
After daemonization get the data directory lock again and hold on to it until exit
This creates a slight window for a race condition to happen, however this condition is harmless: it
will at most make us exit without printing a message to console.
$ src/bitcoind -testnet -daemon
Bitcoin server starting
$ src/bitcoind -testnet -daemon
Error: Cannot obtain a lock on data directory /home/orion/.bitcoin/testnet3. Bitcoin Core is probably already running.
When generating a new service key, explicitly request a RSA1024 one.
The bitcoin P2P protocol has no support for the longer hidden service names
that will come with ed25519 keys, until it does, we depend on the old
hidden service type so make this explicit.
See #9214.
Output instances of "BloomFilter" changed to "Bloom filter", in accordance with Wikipedia standard notation:
https://en.wikipedia.org/wiki/Bloom_filter
also to sync with the majority of cases in the self-same file
c7be56d net: push only raw data into CConnman (Cory Fields)
2ec935d net: add CVectorWriter and CNetMsgMaker (Cory Fields)
b7695c2 net: No need to check individually for disconnection anymore (Cory Fields)
fedea8a net: don't send any messages before handshake or after requested disconnect (Cory Fields)
d74e352 net: Set feelers to disconnect at the end of the version message (Cory Fields)
This fixes one of the last major layer violations in the networking stack.
The network side is no longer in charge of message serialization, so it is now
decoupled from Bitcoin structures. Only the header is serialized and attached
to the payload.
CVectorWriter is useful for overwriting or appending an existing byte vector.
CNetMsgMaker is a shortcut for creating messages on-the-fly which are suitable
for pushing to CConnman.
Bring up the modal progress overlay when the user clicks the spinner
icon in the task bar.
I think this is the intuitive thing to do when that icon is clicked.
ed998ea qt: Avoid OpenSSL certstore-related memory leak (Wladimir J. van der Laan)
5204598 qt: Avoid shutdownwindow-related memory leak (Wladimir J. van der Laan)
e4f126a qt: Avoid splash-screen related memory leak (Wladimir J. van der Laan)
693384e qt: Prevent thread/memory leak on exiting RPCConsole (Wladimir J. van der Laan)
47db075 qt: Plug many memory leaks (Wladimir J. van der Laan)
Also, send reject messages earlier in SendMessages(), so that disconnections are
processed earlier.
These changes combined should ensure that no message is ever sent after
fDisconnect is set.
This way we're not relying on messages going out after fDisconnect has been
set.
This should not cause any real behavioral changes, though feelers should
arguably disconnect earlier in the process. That can be addressed in a later
functional change.
d2b88f9 Move orphan-conflict removal from main logic into a callback (Matt Corallo)
97e2802 Erase orphans per-transaction instead of per-block (Matt Corallo)
ec4525c Move orphan processing to ActivateBestChain (Matt Corallo)
Make splash screen queue its own deletion when it receives the finished
command, instead of relying on WA_DeleteOnClose which doesn't work under
these circumstances.
Make ownership of the QThread object clear, so that the RPCConsole
can wait for the executor thread to quit before shutdown is called. This
increases overall thread safety, and prevents some objects from leaking
on exit.
None of these are very serious, and are leaks in objects that are
created at most one time.
In most cases this means properly using the QObject parent hierarchy,
except for BanTablePriv/PeerTablePriv which are not QObject,
so use a std::unique_ptr instead.
f004e67 Minor change to comment above new NODE_WITNESS service flag to keep it consitent with existing comment structure. Helps with readability. (Greg Walker)
Make sure that the count is a zero modulo the new mask before
scaling, otherwise the next time until a measure triggers
will take only 1/2 as long as accounted for. This caused
the 'min time' to be potentially off by as much as 100%.
When a BIP152 HB-mode peer is in the least preferred position and
disconnects, they will not be by ForNode on the next loop. They
will continue to sit in that position and prevent deactivating
HB mode for peers that are still connected.
There is no reason for them to stay in the list if already gone,
so drop the first element unconditionally if there are too many.
Fixes issue #9163.
037159c Remove block-request logic from INV message processing (Matt Corallo)
3451203 [qa] Respond to getheaders and do not assume a getdata on inv (Matt Corallo)
d768f15 [qa] Make comptool push blocks instead of relying on inv-fetch (mrbandrews)
- Do sorting for date, amount and confirmations column as longlong, not
unsigned longlong.
- Use `UserRole` to store our own data. This makes it treated as
ancillary data prevents it from being displayed.
- Get rid of `getMappedColumn` `strPad` - these are no longer necessary.
- Get rid of hidden `_INT64` columns.
- Start enumeration from 0 (otherwise values are undefined).
In 0.13 orphan transactions began being treated as implicit
INVs for their parents. But the resulting getdata were
not getting the witness flag.
This fixes issue #9182 reported by chjj and roasbeef on IRC.
Make a copy of the boost time-point to wait for, otherwise the head of
the queue may be deleted by another thread while this one is waiting,
while the boost function still has a reference to it.
Although this problem is in non-test code, this is not an actual problem
outside of the tests because we use the thread scheduler with only one
service thread, so there will never be threads fighting at the head of
the queue.
The old boost fallback escapes this problem because it passes a scalar
value to wait_until instead of a const object reference.
Found by running the tests in LLVM-4.0-master asan.
This further decouples "main" and "net" processing logic by moving
orphan processing out of the chain-connecting cs_main lock and
into its own cs_main lock, beside all of the other chain callbacks.
Once further decoupling of net and main processing logic occurs,
orphan handing should move to its own lock, out of cs_main.
Note that this will introduce a race if there are any cases where
we assume the orphan map to be consistent with the current chain
tip, however I am confident there is no such case (ATMP will fail
without DoS score in all such cases).
ae22357 Replace CValidationState param in ProcessNewBlock with BlockChecked (Matt Corallo)
7c98ce5 Remove pfrom parameter from ProcessNewBlock (Matt Corallo)
e2e069d Revert "RPC: Give more details when "generate" fails" (Matt Corallo)
dac53b5 Modify getblocktxn handler not to drop requests for old blocks (Russell Yanofsky)
55bfddc [qa] Fix stale data bug in test_compactblocks_not_at_tip (Russell Yanofsky)
47e9659 [qa] Fix bug in compactblocks v2 merge (Russell Yanofsky)
e2b3fb3 Optimize vInOutPoints insertion a bit (Matt Corallo)
eecffe5 Remove redundant duplicate-input check from CheckTransaction (Matt Corallo)
b2e178a Add deserialize + CheckBlock benchmarks, and a full block hex (Matt Corallo)
d59a518 Use fixed preallocation instead of costly GetSerializeSize (Pieter Wuille)
25a211a Add optimized CSizeComputer serializers (Pieter Wuille)
a2929a2 Make CSerAction's ForRead() constexpr (Pieter Wuille)
a603925 Avoid -Wshadow errors (Pieter Wuille)
5284721 Get rid of nType and nVersion (Pieter Wuille)
657e05a Make GetSerializeSize a wrapper on top of CSizeComputer (Pieter Wuille)
fad9b66 Make nType and nVersion private and sometimes const (Pieter Wuille)
c2c5d42 Make streams' read and write return void (Pieter Wuille)
50e8a9c Remove unused ReadVersion and WriteVersion (Pieter Wuille)
It is unexpected behavior for `ToString` to raise an exception. It
is expected to do a best-effort attempt at formatting but never fail.
Catch the exception and simply print unknown inv types as hexadecimal.
Fixes#9110.
4441018 Every main()/exit() should return/use one of EXIT_ codes instead of magic numbers (UdjinM6)
bd0de13 Fix exit codes: - `--help`, `--version` etc should exit with `0` i.e. no error ("not enough args" case should still trigger an error) - error reading config file should exit with `1` (UdjinM6)
d4833ff Bump the protocol version to distinguish new banning behavior. (Suhas Daftuar)
88c3549 Fix compact block handling to not ban if block is invalid (Suhas Daftuar)
c93beac [qa] Test that invalid compactblocks don't result in ban (Suhas Daftuar)
Dbwrapper used GetSerializeSize() to compute the size of the buffer
to preallocate. For some cases (specifically: CCoins) this requires
a costly compression call. Avoid this by just using fixed size
preallocations instead.
To get the advantages of faster GetSerializeSize() implementations
back that were removed in "Make GetSerializeSize a wrapper on top of
CSizeComputer", reintroduce them in the few places in the form of a
specialized Serialize() implementation. This actually gets us in a
better state than before, as these even get used when they're invoked
indirectly in the serialization of another object.
The CSerAction's ForRead() method does not depend on any runtime
data, so guarantee that requests to it can be optimized out by
making it constexpr.
Suggested by Cory Fields.
Remove the nType and nVersion as parameters to all serialization methods
and functions. There is only one place where it's read and has an impact
(in CAddress), and even there it does not impact any of the recursively
invoked serializers.
Instead, the few places that need nType or nVersion are changed to read
it directly from the stream object, through GetType() and GetVersion()
methods which are added to all stream classes.
Given that in default GetSerializeSize implementations created by
ADD_SERIALIZE_METHODS we're already using CSizeComputer(), get rid
of the specialized GetSerializeSize methods everywhere, and just use
CSizeComputer. This removes a lot of code which isn't actually used
anywhere.
For CCompactSize and CVarInt this actually removes a more efficient
size computing algorithm, which is brought back in a later commit.
The current getblocktxn implementation drops and ignores requests for old
blocks, which causes occasional sync_block timeouts during the
p2p-compactblocks.py test as reported in
https://github.com/bitcoin/bitcoin/issues/8842.
The p2p-compactblocks.py test setup creates many new blocks in a short
period of time, which can lead to getblocktxn requests for blocks below the
hardcoded depth limit of 10 blocks. This commit changes the getblocktxn
handler not to ignore these requests, so the peer nodes in the test setup
will reliably be able to sync.
The protocol change is documented in BIP-152 update "Allow block responses
to getblocktxn requests" at https://github.com/bitcoin/bips/pull/469.
The protocol change is not expected to affect nodes running outside the test
environment, because there shouldn't normally be lots of new blocks being
rapidly added that need to be synced.
The stream implementations had two cascading layers (the upper one
with operator<< and operator>>, and a lower one with read and write).
The lower layer's functions are never cascaded (nor should they, as
they should only be used from the higher layer), so make them return
void instead.
9027680 net: handle version push in InitializeNode (Cory Fields)
7588b85 net: construct CNodeStates in place (Cory Fields)
440f1d3 net: remove now-unused ssSend and Fuzz (Cory Fields)
5c2169c drop the optimistic write counter hack (Cory Fields)
ea33268 net: switch all callers to connman for pushing messages (Cory Fields)
3e32cd0 connman is in charge of pushing messages (Cory Fields)
b98c14c serialization: teach serializers variadics (Cory Fields)
Three categories of modifications:
1)
1 instance of 'The Bitcoin Core developers \n',
1 instance of 'the Bitcoin Core developers\n',
3 instances of 'Bitcoin Core Developers\n', and
12 instances of 'The Bitcoin developers\n'
are made uniform with the 443 instances of 'The Bitcoin Core developers\n'
2)
3 instances of 'BitPay, Inc\.\n' are made uniform with the other 6
instances of 'BitPay Inc\.\n'
3)
4 instances where there was no '(c)' between the 'Copyright' and the year
where it deviates from the style of the local directory.
- `--help`, `--version` etc should exit with `0` i.e. no error ("not enough args" case should still trigger an error)
- error reading config file should exit with `1`
Slightly refactor AppInitRPC/AppInitRawTx to return standard exit codes (EXIT_FAILURE/EXIT_SUCCESS) or CONTINUE_EXECUTION (-1)
The changes here are dense and subtle, but hopefully all is more explicit
than before.
- CConnman is now in charge of sending data rather than the nodes themselves.
This is necessary because many decisions need to be made with all nodes in
mind, and a model that requires the nodes calling up to their manager quickly
turns to spaghetti.
- The per-node-serializer (ssSend) has been replaced with a (quasi-)const
send-version. Since the send version for serialization can only change once
per connection, we now explicitly tag messages with INIT_PROTO_VERSION if
they are sent before the handshake. With this done, there's no need to lock
for access to nSendVersion.
Also, a new stream is used for each message, so there's no need to lock
during the serialization process.
- This takes care of accounting for optimistic sends, so the
nOptimisticBytesWritten hack can be removed.
- -dropmessagestest and -fuzzmessagestest have not been preserved, as I suspect
they haven't been used in years.
This allows future software that would relay compact blocks before
full validation to announce only to peers that will not ban if the
block turns out to be invalid.
f5b960b Move nTimeBestReceived updating into net processing code (Matt Corallo)
d8670fb Move all calls to CheckBlockIndex out of net-processing logic (Matt Corallo)
d6ea737 Remove network state wipe from UnloadBlockIndex. (Matt Corallo)
fc0c24f Move MarkBlockAsReceived out of ProcessNewMessage (Matt Corallo)
65f35eb Move FlushStateToDisk call out of ProcessMessages::TX into ATMP (Matt Corallo)
59ac5c5 net: Use deterministic randomness for CNode's nonce, and make it const (Cory Fields)
aff6584 net: constify a few CNode vars to indicate that they're threadsafe (Cory Fields)
Check for unreasonable alloc size in LockedPool rather than lancing through new
Arenas until we improbably find one worthy of the quixotic request or the system
can support no more Arenas.
- Use the python standard logging library
- Run all tests and report all failing test-cases (rather than stop after one test case fails)
- If output is different from expected output, log a contextual diff.
Refer to the right file in the top-level README.md.
Having only one file with test documentation saves some confusion about
where things are documented.
444c673 bench: Add benchmark for lockedpool allocation/deallocation (Wladimir J. van der Laan)
6567999 rpc: Add `getmemoryinfo` call (Wladimir J. van der Laan)
4536148 support: Add LockedPool (Wladimir J. van der Laan)
f4d1fc2 wallet: Get rid of LockObject and UnlockObject calls in key.h (Wladimir J. van der Laan)
999e4c9 wallet: Change CCrypter to use vectors with secure allocator (Wladimir J. van der Laan)
GetTotalBlocksEstimate is no longer used and it was the only thing
the checkpoint tests were testing.
Since checkpoints are on their way out it makes more sense to remove
the test file than to cook up a new pointless test.
This introduces a 'minimum chain work' chainparam which is intended
to be the known amount of work in the chain for the network at the
time of software release. If you don't have this much work, you're
not yet caught up.
This is used instead of the count of blocks test from checkpoints.
This criteria is trivial to keep updated as there is no element of
subjectivity, trust, or position dependence to it. It is also a more
reliable metric of sync status than a block count.
Fixes newly initialized bloom filters being
constructed with isEmpty(false), which still
works but loses the possible speedup when
checking for key membership in an empty filter.
This will result in many more calls to CheckBlockIndex when
connecting a list of headers (eg in ::HEADERS messages processing)
but its only enabled in debug mode, and that should mostly just be
during IBD, so it should be OK.
UnloadBlockIndex is only used during init if we end up reindexing
to clear our block state so that we can start over. However, at
that time no connections have been brought up as CConnman hasn't
been started yet, so all of the network processing state logic is
empty when its called.
Additionally, the initialization of the recentRejects set is moved
to InitPeerLogic.
This splits the output comparison for `bitcoin-tx` into two steps:
- First, check for data mismatch, parsing the data as json or hex
depending on the extension of the output file
- Then, check if the literal string matches
For either of these cases give a different error.
This prevents wild goose chases when e.g. a trailing space doesn't match
exactly, and makes sure that both test output and examples are valid
data of the purported format.
Recent discussion (in IRC meetings, and e.g. #8989) has shown a
preference for the default confirm target for smartfees to be 6 instead
of 2, to avoid overpaying fees for questionable gain.
6 is also a compromise between the GUI's pre-#8989 value of 25 and the
bitcoind `-txconfirmtarget` default of 2. These were unified in #8989,
but this has made the (overly expensive) default of 2 as GUI default.
```
getmemoryinfo
Returns an object containing information about memory usage.
Result:
{
"locked": { (json object) Information about locked memory manager
"used": xxxxx, (numeric) Number of bytes used
"free": xxxxx, (numeric) Number of bytes available in current arenas
"total": xxxxxxx, (numeric) Total number of bytes managed
"locked": xxxxxx, (numeric) Amount of bytes that succeeded locking. If this number is smaller than total, locking pages failed at some point and key data could be swapped to disk.
}
}
Examples:
> bitcoin-cli getmemoryinfo
> curl --user myusername --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getmemoryinfo", "params": [] }' -H 'content-type: text/plain;' http://127.0.0.1:8332/
```
Add a pool for locked memory chunks, replacing LockedPageManager.
This is something I've been wanting to do for a long time. The current
approach of locking objects where they happen to be on the stack or heap
in-place causes a lot of mlock/munlock system call overhead, slowing
down any handling of keys.
Also locked memory is a limited resource on many operating systems (and
using a lot of it bogs down the system), so the previous approach of
locking every page that may contain any key information (but also other
information) is wasteful.
This change is needed to prevent sync_blocks timeouts in the mempool_reorg
test after the sync_blocks update in the upcoming commit
"[qa] Change sync_blocks to pick smarter maxheight".
This change was initially suggested by Suhas Daftuar <sdaftuar@chaincode.com>
in https://github.com/bitcoin/bitcoin/pull/8680#r78209060
0334430 Add some missing includes (Pieter Wuille)
4100499 Return shared_ptr<CTransaction> from mempool removes (Pieter Wuille)
51f2783 Make removed and conflicted arguments optional to remove (Pieter Wuille)
f48211b Bypass removeRecursive in removeForReorg (Pieter Wuille)
nMaxInbound might very well be 0 or -1, if the user prefers to keep
a small number of maxconnections.
Note: nMaxInbound of -1 means that the user set maxconnections
to 8 or less, but we still want to keep an additional slot for
the feeler connection.
Add getNetworkActive()/setNetworkActive() method to client model.
Send network active status through NotifyNetworkActiveChanged.
Indicate in tool tip of gui status bar network indicator whether network activity is disabled.
Indicate in debug window whether network activity is disabled and add button to allow user to toggle network activity state.
Added the function SetNetworkActive() which when called with argument set to false disconnects all nodes and sets the flag fNetworkActive to false. As long as this flag is false no new connections are attempted and no incoming connections are accepted. Network activity is reenabled by calling the function with argument true.
Note that this is not a major issue as, in order for the missing
lock to cause issues, you have to receive a GETBLOCKTXN message
while reindexing, adding a block header via RPC, etc, which results
in either a table rehash or an insert into the bucket which you are
currently looking at.
3154d6e [Qt] use NotifyHeaderTip's height and date for the progress update (Jonas Schnelli)
0a261b6 Use pindexBestHeader instead of setBlockIndexCandidates for NotifyHeaderTip() (Jonas Schnelli)
Makes it an error to use flags that have not been defined
on the libconsensus API.
There has been some confusion as to what pass to libconsensus, and
(combined with mention in the release notes) this should clear it up.
Using undocumented flags is a risk because their meaning,
and what combinations are allowed, changes from release to release.
E.g. it is no longer possible to pass (CLEANSTACK | P2SH) without
running into an assertion after the segwit changes.
There were discrepancies between usage of "block chain" and "blockchain", I've changed them to the latter. The reason for this was that Wikipedia when describing this data structure writes "A blockchain — *originally block chain*", so it seemed the more appropriate term.
178cd88 Qt/splash: Specifically keep track of which wallet(s) we are connected to for later disconnecting (Luke Dashjr)
1880aeb Qt: Get the private key for signing messages via WalletModel (Luke Dashjr)
Replace these with vectors allocated from the secure allocator.
This avoids mlock syscall churn on stack pages, as well as makes
it possible to get rid of these functions.
Please review this commit and the previous one carefully that
no `sizeof(vectortype)` remains in the memcpys and memcmps usage
(ick!), and `.data()` or `&vec[x]` is used as appropriate instead of
&vec.
Change CCrypter to use vectors with secure allocator instead of buffers
on in the object itself which will end up on the stack. This avoids
having to call LockedPageManager to lock stack memory pages to prevent the
memory from being swapped to disk. This is wasteful.
4630479 Make dnsseed's definition of acute need include relevant services. (Gregory Maxwell)
9583477 Be more aggressive in connecting to peers with relevant services. (Gregory Maxwell)
We normally prefer to connect to peers offering the relevant services.
If we're not connected to enough peers with relevant services, we
probably don't know about them and could use dnsseed's help.
a9aec5c Use BlockChecked signal to send reject messages from mapBlockSource (Matt Corallo)
7565e03 Remove SyncWithWallets wrapper function (Matt Corallo)
12ee1fe Always call UpdatedBlockTip, even if blocks were only disconnected (Matt Corallo)
f5efa28 Remove CConnman parameter from ProcessNewBlock/ActivateBestChain (Matt Corallo)
fef1010 Use CValidationInterface from chain logic to notify peer logic (Matt Corallo)
aefcb7b Move net-processing logic definitions together in main.h (Matt Corallo)
0278fb5 Remove duplicate nBlocksEstimate cmp (we already checked IsIBD()) (Matt Corallo)
87e7d72 Make validationinterface.UpdatedBlockTip more verbose (Matt Corallo)
The new benchmarks exercise script validation, CCoinsDBView caching,
mempool eviction, and wallet coin selection code.
All of the benchmarks added here are extremely simple and don't
necessarily mirror common real world conditions or interesting
performance edge cases. Details about how specific benchmarks can be
improved are noted in comments.
Github-Issue: #7883
3ac6de0 Align constant names for maximum compact block / blocktxn depth (Pieter Wuille)
b2e93a3 Add cmpctblock to debug help list (instagibbs)
fe998e9 More agressively filter compact block requests (Matt Corallo)
02a337d Dont remove a "preferred" cmpctblock peer if they provide a block (Matt Corallo)
Only allow skipping relevant services until there are four outbound
connections up.
This avoids quickly filling up with peers lacking the relevant
services when addrman has few or none of them.
67d6ee1 remove redundant tests in p2p-segwit.py (Johnson Lau)
9260085 test segwit uncompressed key fixes (Johnson Lau)
248f3a7 Fix ismine and addwitnessaddress: no uncompressed keys in segwit (Pieter Wuille)
b811124 [qa] Add tests for uncompressed pubkeys in segwit (Suhas Daftuar)
9f0397a Make test framework produce lowS signatures (Johnson Lau)
4c0c25a Require compressed keys in segwit as policy and disable signing with uncompressed keys for segwit scripts (Johnson Lau)
3ade2f6 Add standard limits for P2WSH with tests (Johnson Lau)
There are only a few uses of `insecure_random` outside the tests.
This PR replaces uses of insecure_random (and its accompanying global
state) in the core code with an FastRandomContext that is automatically
seeded on creation.
This is meant to be used for inner loops. The FastRandomContext
can be in the outer scope, or the class itself, then rand32() is used
inside the loop. Useful e.g. for pushing addresses in CNode or the fee
rounding, or randomization for coin selection.
As a context is created per purpose, thus it gets rid of
cross-thread unprotected shared usage of a single set of globals, this
should also get rid of the potential race conditions.
- I'd say TxMempool::check is not called enough to warrant using a special
fast random context, this is switched to GetRand() (open for
discussion...)
- The use of `insecure_rand` in ConnectThroughProxy has been replaced by
an atomic integer counter. The only goal here is to have a different
credentials pair for each connection to go on a different Tor circuit,
it does not need to be random nor unpredictable.
- To avoid having a FastRandomContext on every CNode, the context is
passed into PushAddress as appropriate.
There remains an insecure_random for test usage in `test_random.h`.
1df3111 protocol.h: Make enums in GetDataMsg concrete values (Wladimir J. van der Laan)
2c09a52 protocol.h: Move MESSAGE_START_SIZE into CMessageHeader (Wladimir J. van der Laan)
f9bd92d version.h: s/shord/short/ in comment (Wladimir J. van der Laan)
27acfc1 [qa] Update p2p-compactblocks.py for compactblocks v2 (Suhas Daftuar)
422fac6 [qa] Add support for compactblocks v2 to mininode (Suhas Daftuar)
f5b9b8f [qa] Fix bug in mininode witness deserialization (Suhas Daftuar)
6aa28ab Use cmpctblock type 2 for segwit-enabled transfer (Pieter Wuille)
be7555f Fix overly-prescriptive p2p-segwit test for new fetch logic (Matt Corallo)
06128da Make GetFetchFlags always request witness objects from witness peers (Matt Corallo)
This concretizes the numbers and adds a comment to make it clear that
these numbers are fixed by the protocol, and may avoid people forgetting
to claim numbers in the future (e.g. issue #8500).
Also gets rid of a weird unused `MSG_TYPE_MAX` in the middle of the
enumeration (thanks @paveljanik for noticing).
This adds a new CValidationInterface subclass, defined in main.h,
to receive notifications of UpdatedBlockTip and use that to push
blocks to peers, instead of doing it directly from
ActivateBestChain.
In anticipation of making all the callbacks out of block processing
flow through it. Note that vHashes will always have something in it
since pindexFork != pindexNewTip.
This fixes a bug where we might (in exceedingly rare circumstances)
accidentally ban a node for sending us the first (potentially few)
segwit blocks in non-segwit mode.
* Minor formatting such as adjusting links
* Move sections of `doc/multiwallet-qt.md` to the source code and delete
the file, as it is outdated
* Fix typo in the release notes
* Amend release process to mention update of BLOCK_CHAIN_SIZE
f00705a serialize: Deprecate `begin_ptr` / `end_ptr` (Wladimir J. van der Laan)
47314e6 prevector: add C++11-like data() method (Wladimir J. van der Laan)
Implement `begin_ptr` and `end_ptr` in terms of C++11 code,
and add a comment that they are deprecated.
Follow-up to developer notes update in 654a211622.
75ead758 turned these into crashes in the event of a handshake failure, most
notably when a peer does not offer the expected services.
There are likely other cases that these assertions will find as well.
Base64 contains '/', and the '/' character in credentials is problematic
for AuthServiceProxy which represents the RPC endpoint as an URI with
user and password embedded.
Closes#8399.
305087b net: Hardcode protocol sizes and use fixed-size types (Wladimir J. van der Laan)
41e58fa net: Consistent checksum handling (Wladimir J. van der Laan)
0c4e6ce Add MIT license to build-aux/m4 scripts (Luke Dashjr)
3f8a5d8 Trivial: build-aux/m4/l_atomic: Fix typo (Luke Dashjr)
3b4b6dc Add MIT license to autogen.sh and share/genbuild.sh (Luke Dashjr)
f4dffdd Add MIT license to Makefiles (Luke Dashjr)
In principle, the checksums of P2P packets are simply 4-byte blobs which
are the first four bytes of SHA256(SHA256(payload)).
Currently they are handled as little-endian 32-bit integers half of the
time, as blobs the other half, sometimes copying the one to the other,
resulting in somewhat confused code.
This PR changes the handling to be consistent both at packet creation
and receiving, making it (I think) easier to understand.
Simplified version of #8278. Assumes that every OS that (a) is supported
by Bitcoin Core (b) supports daemonization has the `daemon()` function
in its C library.
- Removes the fallback path for operating systems that support
daemonization but not `daemon()`. This prevents never-exercised code from
ending up in the repository (see discussion here:
https://github.com/bitcoin/bitcoin/pull/8278#issuecomment-242704745).
- Removes the windows-specific path. Windows doesn't support `daemon()`,
so it don't support daemonization there, automatically.
Original code by Matthew King, adapted by Wladimir van der Laan.
08827df [Qt] modalinfolayer: removed unused comments, renamed signal, code style overhaul (Jonas Schnelli)
d8b062e [Qt] only update "amount of blocks left" when the header chain is in-sync (Jonas Schnelli)
e3245b4 [Qt] add out-of-sync modal info layer (Jonas Schnelli)
e47052f [Qt] ClientModel add method to get the height of the header chain (Jonas Schnelli)
a001f18 [Qt] Always pass the numBlocksChanged signal for headers tip changed (Jonas Schnelli)
bd44a04 [Qt] make Out-Of-Sync warning icon clickable (Jonas Schnelli)
0904c3c [Refactor] refactor function that forms human readable text out of a timeoffset (Jonas Schnelli)
2ca6b9d Remove last reference to CWalletDB from accounting_tests.cpp (Patrick Strateman)
02e2a81 Remove pwalletdb parameter from CWallet::AddAccountingEntry (Patrick Strateman)
d2e678d Add CWallet::ReorderTransactions and use in accounting_tests.cpp (Patrick Strateman)
59adc86 Add CWallet::ListAccountCreditDebit (Patrick Strateman)
After #8594 the addrFrom sent by a node is not used anymore at all,
so don't bother sending it.
Also mitigates the privacy issue in (#8616). It doesn't completely solve
the issue as GetLocalAddress is also called in AdvertiseLocal, but at
least when advertising addresses it stands out less as *our* address.
This was broken by 63cafa6329.
Note that while this fixes the settings, it doesn't fix the actual usage of
-maxuploadtarget completely, as there is currently a bug in the
nOptimisticBytesWritten accounting that causes a delayed response if the target
is reached. That bug will be addressed separately.
In the case of (for example) an already-running bitcoind, the shutdown sequence
begins before CConnman has been created, leading to a null-pointer dereference
when g_connman->Stop() is called.
Instead, Just let the CConnman dtor take care of stopping.
86726d8 Rename `-optintofullrbf` option to `-walletrbf` (Wladimir J. van der Laan)
05fa823 wallet: Add BIP125 comment for MAXINT-1/-2 behavior (Wladimir J. van der Laan)
152f45b Add option to opt into full-RBF when sending funds (Peter Todd)
An example of where this might be useful is allowing a node to connect blocksonly during IBD but then becoming a full-node once caught up with the latest block. This might also even want to be the default behaviour since during IBD most TXs appear to be orphans, and are routinely dropped (for example when a node disconnects). Therefore, this can waste a lot of bandwidth.
Additionally, another pull could be written to stop relaying of TXs to nodes that are clearly far behind the latest block and are running a node that doesn't store many orphan TXs, such as recent versions of Bitcoin Core.
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
waitfornewblock waits until a new block is received, or the timeout expires, then
returns the current block height/hash.
waitforblock waits for a specific blockhash, or until the timeout expires, then
returns the current block height/hash. If the target blockhash is the current
tip, it will return immediately.
waitforblockheight waits until the tip has reached a certain height or higher,
then returns the current height and hash.
waitforblockheight is used to avoid polling in the rpc tests.
35fe039 Rename to PrecomputedTransactionData (Pieter Wuille)
ab48c5e Unit test for sighash caching (Nicolas DORIER)
d2c5d04 Precompute sighashes (Pieter Wuille)
fafe7b3 contrib: Make fix-copyright-headers.py more portable (MarcoFalke)
fa27c0a [doc] Fix typos in comments, doxygen: Fix comment syntax (MarcoFalke)
fabfd5d [qa] pull-tester: Don't mute zmq ImportError (MarcoFalke)
67a5502 init: Fix typo in help message for -whitelistforcerelay (Wladimir J. van der Laan)
We should learn about new peers via address messages.
An inbound peer connecting to us tells us nothing about
its ability to accept incoming connections from us, so
we shouldn't assume that we can connect to it based on
this.
The vast majority of nodes on the network do not accept
incoming connections, adding them will only slow down
the process of making a successful connection in the
future.
Nodes which have configured themselves to not announce would prefer we
not violate their privacy by announcing them in GETADDR responses.
Tests if addresses are online or offline by briefly connecting to them. These short lived connections are referred to as feeler connections. Feeler connections are designed to increase the number of fresh online addresses in tried by selecting and connecting to addresses in new. One feeler connection is attempted on average once every two minutes.
This change was suggested as Countermeasure 4 in
Eclipse Attacks on Bitcoin’s Peer-to-Peer Network, Ethan Heilman,
Alison Kendler, Aviv Zohar, Sharon Goldberg. ePrint Archive Report
2015/263. March 2015.
Commands can be executed with bracket syntax, example: `getwalletinfo()`.
Commands can be nested, example: `sendtoaddress(getnewaddress(), 10)`.
Simple queries are possible: `listunspent()[0][txid]`
Object values are accessed with a non-quoted string, example: [txid].
Fully backward compatible.
`generate 101` is identical to `generate(101)`
Result value queries indicated with `[]` require the new brackets syntax.
Comma as argument separator is now also possible: `sendtoaddress,<address>,<amount>`
Space as argument separator works also with the bracket syntax, example: `sendtoaddress(getnewaddress() 10)
No dept limitation, complex commands are possible:
`decoderawtransaction(getrawtransaction(getblock(getbestblockhash())[tx][0]))[vout][0][value]`
Remove the unused variable "blockTmp" in CMerkleTx::SetMerkleBranch. It
was previously used to read the block from disk if not provided as
argument, but is no longer needed.
The `pickDataDirectory()` function was calling `exit(0)` to quit
the application when the user closes the dialog without choosing
a data directory.
This is a bad idea because a background thread is created (to
check free space on the drive of the currently selected datadir).
The thread is not stopped and unwound properly, resulting in a potential
race condition somewhere deep in Qt.
So replace the `exit()` by a boolean return value, and let the
stack unwind normally.
7a49cac Merge #410: Add string.h include to ecmult_impl
0bbd5d4 Add string.h include to ecmult_impl
c5b32e1 Merge #405: Make secp256k1_fe_sqrt constant time
926836a Make secp256k1_fe_sqrt constant time
e2a8e92 Merge #404: Replace 3M + 4S doubling formula with 2M + 5S one
8ec49d8 Add note about 2M + 5S doubling formula
5a91bd7 Merge #400: A couple minor cleanups
ac01378 build: add -DSECP256K1_BUILD to benchmark_internal build flags
a6c6f99 Remove a bunch of unused stdlib #includes
65285a6 Merge #403: configure: add flag to disable OpenSSL tests
a9b2a5d configure: add flag to disable OpenSSL tests
b340123 Merge #402: Add support for testing quadratic residues
e6e9805 Add function for testing quadratic residue field/group elements.
efd953a Add Jacobi symbol test via GMP
fa36a0d Merge #401: ecmult_const: unify endomorphism and non-endomorphism skew cases
c6191fd ecmult_const: unify endomorphism and non-endomorphism skew cases
0b3e618 Merge #378: .gitignore build-aux cleanup
6042217 Merge #384: JNI: align shared files copyright/comments to bitcoinj's
24ad20f Merge #399: build: verify that the native compiler works for static precomp
b3be852 Merge #398: Test whether ECDH and Schnorr are enabled for JNI
aa0b1fd build: verify that the native compiler works for static precomp
eee808d Test whether ECDH and Schnorr are enabled for JNI
7b0fb18 Merge #366: ARM assembly implementation of field_10x26 inner (rebase of #173)
001f176 ARM assembly implementation of field_10x26 inner
0172be9 Merge #397: Small fixes for sha256
3f8b78e Fix undefs in hash_impl.h
2ab4695 Fix state size in sha256 struct
6875b01 Merge #386: Add some missing `VERIFY_CHECK(ctx != NULL)`
2c52b5d Merge #389: Cast pointers through uintptr_t under JNI
43097a4 Merge #390: Update bitcoin-core GitHub links
31c9c12 Merge #391: JNI: Only call ecdsa_verify if its inputs parsed correctly
1cb2302 Merge #392: Add testcase which hits additional branch in secp256k1_scalar_sqr
d2ee340 Merge #388: bench_ecdh: fix call to secp256k1_context_create
093a497 Add testcase which hits additional branch in secp256k1_scalar_sqr
a40c701 JNI: Only call ecdsa_verify if its inputs parsed correctly
faa2a11 Update bitcoin-core GitHub links
47b9e78 Cast pointers through uintptr_t under JNI
f36f9c6 bench_ecdh: fix call to secp256k1_context_create
bcc4881 Add some missing `VERIFY_CHECK(ctx != NULL)` for functions that use `ARG_CHECK`
6ceea2c align shared files copyright/comments to bitcoinj's
70141a8 Update .gitignore
7b549b1 Merge #373: build: fix x86_64 asm detection for some compilers
bc7c93c Merge #374: Add note about y=0 being possible on one of the sextic twists
e457018 Merge #364: JNI rebased
86e2d07 JNI library: cleanup, removed unimplemented code
3093576a JNI library
bd2895f Merge pull request #371
e72e93a Add note about y=0 being possible on one of the sextic twists
3f8fdfb build: fix x86_64 asm detection for some compilers
e5a9047 [Trivial] Remove double semicolons
c18b869 Merge pull request #360
3026daa Merge pull request #302
03d4611 Add sage verification script for the group laws
a965937 Merge pull request #361
83221ec Add experimental features to configure
5d4c5a3 Prevent damage_array in the signature test from going out of bounds.
419bf7f Merge pull request #356
03d84a4 Benchmark against OpenSSL verification
git-subtree-dir: src/secp256k1
git-subtree-split: 7a49cacd3937311fcb1cb36b6ba3336fca811991
9e9d644 net: fixup nits (Cory Fields)
8945384 net: Have LookupNumeric return a CService directly (Cory Fields)
21ba407 net: narrow include scope after moving to netaddress (Cory Fields)
21e5b96 net: move CNetAddr/CService/CSubNet out of netbase (Cory Fields)
1017b8a net: Add direct tests for new CSubNet constructors (Cory Fields)
b6c3ff3 net: Split resolving out of CSubNet (Cory Fields)
f96c7c4 net: Split resolving out of CService (Cory Fields)
31d6b1d net: Split resolving out of CNetAddr (Cory Fields)
c784086 use std::map::emplace() instead of std::map::insert() (whythat)
5e187e7 use c++11 std::unique_ptr instead of boost::shared_ptr (whythat)
947913f use std::map::erase(const_iterator, const_iterator) to get non-constant iterator (whythat)
239cbd2 qa/rpc-tests/segwit: Test GBT sigops before and after activation (Luke Dashjr)
160f895 Bugfix: Use pre-BIP141 sigops until segwit activates (Luke Dashjr)
refs #8225
To ensure the GUI closes when the "Minimize on close" window option is disabled, and the "Minimize to the tray instead of the taskbar" window option is enbaled, remove a check made against the "Minimize to the tray instead of the taskbar" value, made during GUI closure.
To ensure the GUI minimizes to the taskbar when the "Minimize on close" window option is enabled, and the "Minimize to the tray instead of the taskbar" window option is disabled, minimize the GUI and ignore the closure event.
9d4eb9a Do diskspace check before import thread is started (Pieter Wuille)
aa59f2e Add extra message to avoid a long 'Loading banlist' (Pieter Wuille)
0fd2a33 Use a signal to continue init after genesis activation (Pieter Wuille)
Updating documentation for adding new unit test files
Removing unneeded sentence from README
Removing uint160_tests.cpp as it DNE
Formatting command line instructions to use ``
fixing 80 char formatting issue in README
fixing more nits
a5072a7 util: Remove zero-argument versions of LogPrint and error (Wladimir J. van der Laan)
695041e util: Update tinyformat (Wladimir J. van der Laan)
7e87033 httpserver: replace boost threads with std (Cory Fields)
d3773ca httpserver: explicitly detach worker threads (Cory Fields)
755aa05 httpserver: use a future rather than relying on boost's try_join_for (Cory Fields)
along with mutex/condvar/bind/etc.
httpserver handles its own interruption, so there's no reason not to use std
threading.
While we're at it, may as well kill the BOOST_FOREACH's as well.
Forward-ports two commits from 0.13:
- [0.13] Create a new HD seed after encrypting the wallet
- [Wallet] Add CKeyMetadata record for HDMasterKey(s), factor out HD key generation
Github-Pull: #8389
Rebased-From: f142c11ac634df487cc4bc65a5f1c9a3e3563dd9 de45c065f0648c4c41b57cb492420ceeed29dd11
c59c434 qa: Add test for standardness of segwit v0 outputs (Suhas Daftuar)
1ffaff2 Make witness v0 outputs non-standard before segwit activation (Johnson Lau)
7945088 [Wallet] comsetic non-code changes for the HD feature (Jonas Schnelli)
68d7682 [Wallet] ensure CKeyMetadata.hdMasterKeyID will be cleared during SetNull() (Jonas Schnelli)
f708085 [QA] extend wallet-hd test to cover HD metadata (Jonas Schnelli)
986c223 [Wallet] print hd masterkeyid in getwalletinfo (Jonas Schnelli)
b1c7b24 [Wallet] report optional HDKeypath/HDMasterKeyId in validateaddress (Jonas Schnelli)
5b95dd2 [Wallet] extend CKeyMetadata with HD keypath (Jonas Schnelli)
46c9620 Test that unnecessary witnesses can't be used for mempool DoS (Suhas Daftuar)
bb66a11 Fix DoS vulnerability in mempool acceptance (Suhas Daftuar)
When processing a headers message that looks like a block announcement,
send peer a getheaders if the headers message won't connect.
Apply DoS points after too many consecutive unconnecting headers messages.
Moves the IsStandard check to happen after the premature-witness check,
so that adding a witness to a transaction can't prevent mempool acceptance.
Note that this doesn't address the broader category of potential mempool DoS
issues that affect transactions after segwit activation.
Also cap the allocation for the leveldb-specific cache for the UTXO set
to 8MiB.
This avoids that the extra cache memory goes to the much less effective
leveldb cache instead of our application-level cache.
This reverts PR #4906, "Coinselection prunes extraneous inputs from
ApproximateBestSubset".
Apparently the previous behavior of slightly over-estimating the set of
inputs was useful in cleaning up UTXOs.
See also #7664, #7657, as well as 2016-07-01 discussion on #bitcoin-core-dev IRC.
Generate an (invalid) example address for in the bitcoin address
widgets, based on the network prefix, instead of hardcoding a mainnet
address.
- `1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L` for mainnet (same as now)
- `n2wxQmfexkjwEPgdD6iJA7T7RtzkmHxhFc` for testnet
Changes in tinyformat, recently imported from upstream have made the
zero-argument versions of formatting functions unnecessary. Remove them.
This is a slight semantic change: `%` characters in the zero-argument
call are now regarded and need to be escaped. As for as I know, the only
use of this is in `main.cpp`.
Updates `tinyformat.h` to commit
3a33bbf654 upstream.
Makes sure that our local changes are kept:
- #37671b8fd35aad Make tinyformat errors raise an exception instead of assert()ing
- #47359b6d4c5cdc Move strprintf define to tinyformat.h
- #47486e5fd003e0 include stdexcept (for std::exception)
- #80009eaa0afa6e force USE_VARIADIC_TEMPLATES
- Add `std::string format(const std::string &fmt...` added this
at the time, as we want to be able to do `strprintf(_(...), ...)`
Inspired by #8264.
mininode now supports witness transactions/blocks, blocktools
has a helper for adding witness commitments to blocks, and script
has a function to calculate hashes for signature under sigversion
1, used by segwit.
Py3 conversion by Marco Falke
Test to make sure upgraded nodes don't ask for non-wit blocks by
Gregory Sanders.
script_tests: always test bitcoinconsensus_verify_script_with_amount if VERIFY_WITNESS isn't set
Rename internal method + make it static
trim bitcoinconsensus_ prefix
Add SERIALIZE_TRANSACTION_WITNESS flag
48efec8 Fix some minor compact block issues that came up in review (Matt Corallo)
ccd06b9 Elaborate bucket size math (Pieter Wuille)
0d4cb48 Use vTxHashes to optimize InitData significantly (Matt Corallo)
8119026 Provide a flat list of txid/terators to txn in CTxMemPool (Matt Corallo)
678ee97 Add BIP 152 to implemented BIPs list (Matt Corallo)
56ba516 Add reconstruction debug logging (Matt Corallo)
2f34a2e Get our "best three" peers to announce blocks using cmpctblocks (Matt Corallo)
927f8ee Add ability to fetch CNode by NodeId (Matt Corallo)
d25cd3e Add receiver-side protocol implementation for CMPCTBLOCK stuff (Matt Corallo)
9c837d5 Add sender-side protocol implementation for CMPCTBLOCK stuff (Matt Corallo)
00c4078 Add protocol messages for short-ids blocks (Matt Corallo)
e3b2222 Add some blockencodings tests (Matt Corallo)
f4f8f14 Add TestMemPoolEntryHelper::FromTx version for CTransaction (Matt Corallo)
85ad31e Add partial-block block encodings API (Matt Corallo)
5249dac Add COMPACTSIZE wrapper similar to VARINT for serialization (Matt Corallo)
cbda71c Move context-required checks from CheckBlockHeader to Contextual... (Matt Corallo)
7c29ec9 If AcceptBlockHeader returns true, pindex will be set. (Matt Corallo)
96806c3 Stop trimming when mapTx is empty (Pieter Wuille)
Pulls in the following new languages:
- `af` Afrikaans
- `es_419` Spanish (Latin America)
- `es_AR` Spanish (Argentina)
- `es_CO` Spanish (Colombia)
- `fil` Filipino
- `it_IT` Italian (Italy)
- `ro` Romanian
- `sr@latin` Serbian (Latin)
- `ta` Tamil
- `uz@Latn` Uzbek (Latin)
- `zh_HK` Chinese (Hong Kong)
54326a6 Increase maximum orphan size to 100,000 bytes. (Gregory Maxwell)
8c99d1b Treat orphans as implicit inv for parents, discard when parents rejected. (Gregory Maxwell)
11cc143 Adds an expiration time for orphan tx. (Gregory Maxwell)
db0ffe8 This eliminates the primary leak that causes the orphan map to always grow to its maximum size. (Gregory Maxwell)
1b0bcc5 Track orphan by prev COutPoint rather than prev hash (Pieter Wuille)
CreateNewBlock returns a pointer for which the caller takes ownership.
Use std::unique_ptr to make this explicit and simplify handling of these
objects in getblocktemplate.
7982fce doc: Mention full UTF-8 support in release notes (Wladimir J. van der Laan)
6bbb4ef test: test utf-8 for labels in wallet (Wladimir J. van der Laan)
a406fcb test: add ensure_ascii setting to AuthServiceProxy (Wladimir J. van der Laan)
60ab9b2 Squashed 'src/univalue/' changes from 2740c4f..f32df99 (Wladimir J. van der Laan)
1a5a4e6 Randomize name lookup result in ConnectSocketByName (Pieter Wuille)
f9f5cfc Prevent duplicate connections where one is by name and another by ip (Pieter Wuille)
1111b80 Rework addnode behaviour (Pieter Wuille)
6ee7f05 Allow disconnecting a netgroup with only one member in eviction. (Gregory Maxwell)
5d0ca81 Add recently accepted blocks and txn to AttemptToEvictConnection. (Gregory Maxwell)
An orphan whos parents were rejected is never going to connect, so there
is little utility in keeping it.
Orphans also helpfully tell us what we're missing, so go ahead and treat
it as INVed.
This prevents higher order orphans and other junk from
holding positions in the orphan map. Parents delayed
twenty minutes are more are unlikely to ever arrive.
The freed space will improve the orphan matching success rate for
other transactions.
As per meeting 2016-03-31
https://bitcoincore.org/en/meetings/2016/03/31/#bad-chain-alerts
The partition checker was producing huge number of false-positives
and was disabled in 0.12.1 on the understanding it would either be
fixed in 0.13 or removed entirely from master if not.
* Use CNode::addeName to track whether a connection to a name is already open
* A new connection to a previously-connected by-name addednode is only opened when
the previous one closes (even if the name starts resolving to something else)
* At most one connection is opened per addednode (even if the name resolves to multiple)
* Unify the code between ThreadOpenAddedNodeConnections and getaddednodeinfo
* Information about open connections is always returned, and the dns argument becomes a dummy
* An IP address and inbound/outbound is only reported for the (at most 1) open connection
In the Receive 'Tab' of the QT wallet, when 'Show'ing a previously requested payment, add a label underneath the QR Code showing the bitcoin address where the funds will go to.
This way the user can be sure that the QR code scanner app the user using is reading the correct bitcoin address, preventing funds to be stolen.
Includes fix for HiDPI screens by @jonasschnelli.
ff2dcf2 Tests: Edit bloated varint test and add option for 'barely expensive' tests (mrbandrews)
12c5a16 Catch exceptions from non-canonical encoding and print only to log (mrbandrews)
291f8aa Continuing port of java comptool (mrbandrews)
8c9e681 Tests: Rework blockstore to avoid re-serialization. (mrbandrews)
c2dd5a3 FIX: correctly measure size of priority block (Alex Morcos)
a278764 FIX: Account for txs already added to block in addPriorityTxs (Alex Morcos)
4dc94d1 Refactor CreateNewBlock to be a method of the BlockAssembler class (Alex Morcos)
always grow to its maximum size.
This does not go so far as to attempt to connect orphans made
connectable by a new block.
Keeping the orphan map less full helps improve the reliability
of relaying chains of transactions.
Putting the build date in the executable is a practice that has no place
in these days, now that deterministic building is increasingly common.
Continues #7732 which did this for the GUI.
eebc232 test: Add more test vectors for siphash (Wladimir J. van der Laan)
8884830 Use C++11 thread-safe static initializers (Pieter Wuille)
c31b24f Use 64-bit SipHash of netgroups in eviction (Pieter Wuille)
9bf156b Support SipHash with arbitrary byte writes (Pieter Wuille)
053930f Avoid recalculating vchKeyedNetGroup in eviction logic. (Patrick Strateman)
288d85d Get rid of CTxMempool::lookup() entirely (Pieter Wuille)
c2a4724 Optimization: use usec in expiration and reuse nNow (Pieter Wuille)
e9b4780 Optimization: don't check the mempool at all if no mempool req ever (Pieter Wuille)
dbfb426 Optimize the relay map to use shared_ptr's (Pieter Wuille)
8d39d7a Switch CTransaction storage in mempool to std::shared_ptr (Pieter Wuille)
1b9e6d3 Add support for unique_ptr and shared_ptr to memusage (Pieter Wuille)
6182d10 Do not increment nAttempts by more than one for every Good connection. (Gregory Maxwell)
c769c4a Avoid counting failed connect attempts when probably offline. (Gregory Maxwell)
3d3602f Add RPC test for the p2p mempool command in conjunction with disabled bloomfilters (Jonas Schnelli)
beceac9 Disable the mempool P2P command when bloom filters disabled (Peter Todd)
Add error and range-checking parsers for unsigned 32 and 64 bit numbers.
The 32-bit variant is required for parsing sequence numbers from the
command line in `bitcoin-tx` (see #8164 for discussion). I've thrown in
the 64-bit variant as a bonus, as I'm sure it will be needed at some
point.
Also adds tests, and updates `developer-notes.md`.
ae357d5 [Bitcoin-Tx] Add tests for sequence number support (Jonas Schnelli)
e59336f [bitcoin-tx] allow to set nSequence number over the in= command (Jonas Schnelli)
a946bb6 [RPC] createrawtransaction: add option to set the sequence number per input (Jonas Schnelli)
Also introduce UniValueType
UniValueType is a wrapper for UniValue::VType which allows setting
a typeAny flag. This flag indicates the type does not matter.
(Used by RPCTypeCheckObj)
We send a newly-accepted peer a 1000-entry addr message, and then only use
vAddrToSend for small messages. Deallocate vAddrToSend after it's been used for
the big message to save about 40 kB per connected inbound peer.
- BIP9DeploymentInfo struct for static deployment info
- VersionBitsDeploymentInfo: Avoid C++11ism by commenting parameter names
- getblocktemplate: Make sure to set deployments in the version if it is LOCKED_IN
- In this commit, all rules are considered required for clients to support
Change authentication order to make it more clear (see #7700).
- If the `-torpassword` option is provided, force use of
`HASHEDPASSWORD` auth.
- Give error message if `-torpassword` provided, but
`HASHEDPASSWORD` auth is not available.
- Give error message if only `HASHEDPASSWORD` available, but
`-torpassword` not given.
* Switch mapRelay to use shared_ptr<CTransaction>
* Switch the relay code to copy mempool shared_ptr's, rather than copying
the transaction itself.
* Change vRelayExpiration to store mapRelay iterators rather than hashes
(smaller and faster).
Optimistically test the latch bool before taking the lock.
For all IsInitialBlockDownload calls after the first to return false,
this avoids the need to lock cs_main.
This was caused by an pyc files hanging around from previous
python2 invocations, when the matching .py missing from that path.
This should not be a problem with python3's tagged caches.
Saves about 10% of application memory usage once the mempool warms up. Since the
mempool is DynamicUsage-regulated, this will translate to a larger mempool in
the same amount of space.
Map value type: eliminate the vin index; no users of the map need to know which
input of the transaction is spending the prevout.
Map key type: replace the COutPoint with a pointer to a COutPoint. A COutPoint
is 36 bytes, but each COutPoint is accessible from the same map entry's value.
A trivial DereferencingComparator functor allows indirect map keys, but the
resulting syntax is misleading: `map.find(&outpoint)`. Implement an indirectmap
that acts as a wrapper to a map that uses a DereferencingComparator, supporting
a syntax that accurately reflect the container's semantics: inserts and
iterators use pointers since they store pointers and need them to remain
constant and dereferenceable, but lookup functions take const references.
269a440 Add test for dbwrapper iterators with same-prefix keys. (Matt Corallo)
6030625 test: Add more thorough test for dbwrapper iterators (Wladimir J. van der Laan)
84c13e7 chain: Add assertion in case of missing records in index db (Wladimir J. van der Laan)
Before this, if someone imported a scriptPubKey directly (in hex form) using
importaddress, outputs sending to it would be treated as change, as the
corresponding CTxDestination was not added to the address book.
Fix this by trying to detect scriptPubKeys that are in fact convertible to a
CTxDestination and add them anyway. Add a warning to the RPC help to warn
against importing raw non-standard scripts.
- clear the __pycache__ during 'make clean'
- Copy the qrc locale file to a temp location and remove it when finished
(rcc expects everything to be in the same path)
This reduces the rate of not founds by better matching the far
end expectations, it also improves privacy by removing the
ability to use getdata to probe for a node having a txn before
it has been relayed.
Previously the benchmark code used an integer division (%) with
a non-constant in the inner-loop. This is quite slow on many
processors, especially ones like ARM that lack a hardware divide.
Even on fairly recent x86_64 like haswell an integer division can
take something like 100 cycles-- making it comparable to the
runtime of siphash.
This change avoids the division by using bitmasking instead. This
was especially easy since the count was only increased by doubling.
This change also restarts the timing when the execution time was
very low this avoids mintimes of zero in cases where one execution
ends up below the timer resolution. It also reduces the impact of
the overhead on the final result.
The formatting of the prints is changed to not use scientific
notation make it more machine readable (in particular, gnuplot
croaks on the non-fixedpoint, and it doesn't sort correctly).
This also hoists out all the floating point divisions out of the
semi-hot path because it was easy to do so.
It might be prudent to break out the critical test into a macro
just to guarantee that it gets inlined. It might also make sense
to just save out the intermediate counts and times and get the
floating point completely out of the timing loop (because e.g.
on hardware without a fast hardware FPU like some ARM it will
still be slow enough to distort the results). I haven't done
either of these in this commit.
Fixing formatting
Adding test case into automatically generated test case set
Clean up commits
removing extra whitespace from eol
Removing extra whitespace on macro line
If a node is offline failed outbound connection attempts will crank up
the addrman counter and effectively blow away our state.
This change reduces the problem by only counting attempts made while
the node believes it has outbound connections to at least two
netgroups.
Connect and addnode connections are also not counted, as there is no
reason to unequally penalize them for their more frequent
connections -- though there should be no real effect from this
unless their addnode configureation is later removed.
Wasteful repeated connection attempts while only a few connections are
up are avoided via nLastTry.
This is still somewhat incomplete protection because our outbound
peers could be down but not timed out or might all be on 'local'
networks (although the requirement for multiple netgroups helps).
The ability to GETDATA a transaction which has not (yet) been relayed
is a privacy loss vector.
The use of the mempool for this was added as part of the mempool p2p
message and is only needed to fetch transactions returned by it.
2a8b358 Fix typo adddrman to addrman as requested in #8070 (Ethan Heilman)
f4119c6 Remove non-determinism which is breaking net_tests #8069 (EthanHeilman)
bf9266e Use Socks5ErrorString() to decode error responses from socks proxy. (Warren Togami)
94fd1d8 Make Socks5() InterruptibleRecv() timeout/failures informative. (Warren Togami)
0d9af79 SOCKS5 connecting and connected messages with -debug=net. (Warren Togami)
00678bd Make failures to connect via Socks5() more informative and less unnecessarily scary. (Warren Togami)
b4d24e1 Report reindexing progress in GUI (Pieter Wuille)
d3d7547 Add -reindex-chainstate that does not rebuild block index (Pieter Wuille)
fb8fad1 Optimize ActivateBestChain for long chains (Pieter Wuille)
316623f Switch reindexing to AcceptBlock in-loop and ActivateBestChain afterwards (Pieter Wuille)
d253ec4 Make ProcessNewBlock dbp const and update comment (Pieter Wuille)
5d5e7a0 net: No need to export ConnectNode (Cory Fields)
e9ed620 net: No need to export DumpBanlist (Cory Fields)
8b8f877 net: make Ban/Unban/ClearBan functionality consistent (Cory Fields)
cca221f net: Drop CNodeRef for AttemptToEvictConnection (Cory Fields)
563f375 net: use the exposed GetNodeSignals() rather than g_signals directly (Cory Fields)
9faa490 net: remove unused set (Cory Fields)
52cbce2 net: don't import std namespace (Cory Fields)
a68ec21 Use SipHash-2-4 for address relay selection (Pieter Wuille)
8cc9cfe Switch CTxMempool::mapTx to use a hash index for txids (Pieter Wuille)
382c871 Use SipHash-2-4 for CCoinsCache index (Pieter Wuille)
0b1295b Add SipHash-2-4 primitives to hash (Pieter Wuille)
1475ecf Fix de-serialization bug where AddrMan is corrupted after exception * CAddrDB modified so that when de-serialization code throws an exception Addrman is reset to a clean state * CAddrDB modified to make unit tests possible * Regression test created to ensure bug is fixed * StartNode modifed to clear adrman if CAddrDB::Read returns an error code. (EthanHeilman)
fa83a5d [qa] wallet: Temporarily disable salvagewallet test (MarcoFalke)
fadd048 [doc] Link to clang-format in the developer notes (MarcoFalke)
fa72f7d [doc] Remove outdated line from listunspent RPC help, fix typo (MarcoFalke)
ac40ed7 Increase timeout waiting for pruned blk00000.dat (error10)
The current logic for syncing headers may lead to lots of duplicate
getheaders requests being sent: If a new block arrives while the node
is in headers sync, it will send getheaders in response to the block
announcement. When the headers arrive, the message will be of maximum
size and so a follow-up request will be sent---all of that in addition
to the existing headers syncing. This will create a second "chain" of
getheaders requests. If more blocks arrive, this may even lead to
arbitrarily many parallel chains of redundant requests.
This patch changes the behaviour to only request more headers after a
maximum-sized message when it contained at least one unknown header.
This avoids sustaining parallel chains of redundant requests.
Note that this patch avoids the issues raised in the discussion of
https://github.com/bitcoin/bitcoin/pull/6821: There is no risk of the
node being permanently blocked. At the latest when a new block arrives
this will trigger a new getheaders request and restart syncing.
Verify that results correct (match known values), consistent (encrypt->decrypt
matches the original), and compatible with the previous openssl implementation.
Also check that failed encrypts/decrypts fail the exact same way as openssl.
Wallet must come before crypto, otherwise linking fails on some platforms.
Includes a tangentially-related general cleanup rather than making the Makefile
sloppier.
The output should always match openssl's, even for failed operations. Even for
a decrypt with broken padding, the output is always deterministic (and attemtps
to be constant-time).
My changes leave all tray icon and menu creation/initialization logic
untouched. It only shows or hides the icon according to the setting.
A new checkbox was added to the OptionsDialog under the Window tab. A
bool option named "hideTrayIcon" was added to OptionsModel. This
checkbox was mapped like other all options to the OptionsModel.
A signal was added to the OptionsModel for broadcasting changes the the
hideTrayIcon option. This signal was connected to a new slot added to
BitcoinGUI named setTrayIconVisible(bool). The slot simply hides or
shows the trayIcon in BitcoinGUI according to the parameter recieved.
Changing NOP3 op name to OP_CHECKSEQUENCEVERIFY, renaming instances of OP_NOP3 in script_tests.json to CHECKSEQUENCEVERIFY
Cleaning up NOP3 comment
Re-adding test cases that were accidentally deleted, removing dupicated test case, fixing formatting
Removing re-labeling of OP_NOP3 to OP_CSV
Fixing whitespace issues
- Ban/Unban/ClearBan call uiInterface.BannedListChanged() as necessary
- Ban/Unban/ClearBan sync to disk if the operation is user-invoked
- Mark node for disconnection automatically when banning
- Lock cs_vNodes while setting disconnected
- Don't spin in a tight loop while setting disconnected
Move the version reporting to Wallet::Verify, before starting
verification of the wallet.
This removes the dependency of init on a specific wallet database
library.
A further, trivial step towards resolving #7965.
166e4b0 Notify other serviceQueue thread we are finished to prevent deadlocks. (Pavel Janík)
db18ab2 Reenable multithread scheduler test. (Pavel Janík)
I made a subclass of QMessageBox that disables the send button in
exec() and starts a timer that calls a slot to re-enable it after a
configurable delay.
It also has a countdown in the send/yes button while it is disabled
to hint to the user why the send button is disabled (and that it is
actually supposed to be disabled).
* The "ERROR" was printed far too often during normal operation for what was not an error.
* Makes the Socks5() connect failure similar to the IP connect failure in debug.log.
Before:
`2016-05-09 00:15:00 ERROR: Proxy error: host unreachable`
After:
`2016-05-09 00:15:00 Socks5() connect to t6xj6wilh4ytvcs7.onion:18333 failed: host unreachable"`
Locking for each operation here is unnecessary, and solves the wrong problem.
Additionally, it introduces a problem when cs_vNodes is held in an owning
class, to which invididual CNodeRefs won't have access.
These should be weak pointers anyway, once vNodes contain shared pointers.
Rather than using a refcounting class, use a 3-step process instead.
1. Lock vNodes long enough to snapshot the fields necessary for comparing
2. Unlock and do the comparison
3. Re-lock and mark the resulting node for disconnection if it still exists
d1d7775 Improve worst-case behavior of CScript::FindAndDelete (Patrick Strateman)
e2a30bc Unit test for CScript::FindAndDelete (Gavin Andresen)
c0f660c Replace c-style cast with c++ style static_cast. (Patrick Strateman)
ec9ad5f Replace memcmp with std::equal in CScript::FindAndDelete (Patrick Strateman)
b559914 Move bloom and feerate filtering to just prior to tx sending. (Gregory Maxwell)
4578215 Return mempool queries in dependency order (Pieter Wuille)
ed70683 Handle mempool requests in send loop, subject to trickle (Pieter Wuille)
dc13dcd Split up and optimize transaction and block inv queues (Pieter Wuille)
f2d3ba7 Eliminate TX trickle bypass, sort TX invs for privacy and priority. (Gregory Maxwell)
f0188f9 http: use std::move to move HTTPRequest into HTTPWorkItem (Wladimir J. van der Laan)
37b2137 http: Change boost::scoped_ptr to std::unique_ptr in HTTPRequest (Wladimir J. van der Laan)
f97b410 http: Add log message when work queue is full (Wladimir J. van der Laan)
091d6e0 http: Do a pending c++11 simplification (Wladimir J. van der Laan)
Use std::unique_ptr for handling work items.
This makes the code more RAII and, as mentioned in the comment, is what
I planned when I wrote the code in the first place.
08d7b56 util: switch LogPrint and error to variadic templates (Wladimir J. van der Laan)
9eaa0af tinyformat: force USE_VARIADIC_TEMPLATES (Wladimir J. van der Laan)
* CAddrDB modified so that when de-serialization code throws an exception Addrman is reset to a clean state
* CAddrDB modified to make unit tests possible
* Regression test created to ensure bug is fixed
* StartNode modifed to clear adrman if CAddrDB::Read returns an error code.
Some developers clearly don't get this and have been posting
"improvements" that create clear vulnerabilities. It should
have been better explained in the code, since the design
is somewhat subtle and getting it right is important.
This patch changes the implementation from one that stores 16 2-bit integers
in one uint32_t's, to one that stores the first bit of 64 2-bit integers in
one uint64_t and the second bit in another. This allows for 450x faster
refreshing and 2.2x faster average speed.
Change the few occurrences of the deprecated `auto_ptr` to c++11 `unique_ptr`.
Silences the deprecation warnings.
Also add a missing `std::` for consistency.
Bitwise logic combined with `<` with undefined signedness will
potentially results in undefined behavior. Fix this by defining the type
as a c++11 typed enum.
Fixes#6017.
f135e3c qt: Add transaction hash to details window title (Wladimir J. van der Laan)
17a6a21 qt: Make it possible to show details for multiple transactions (Wladimir J. van der Laan)
DumpBanList currently does this:
- with lock: take a copy of the banmap
- perform I/O (write out the banmap)
- with lock: mark the banmap non-dirty
If a new ban is added during the I/O operation, it may never be persisted to
disk.
Reorder operations so that the data to be persisted cannot be older than the
time at which the banmap was marked non-dirty.
I made a silly mistake in a database wrapper where keys
were sorted by char instead of uint8_t. As x86 char is signed
the sorting for the block index database was messed up, resulting
in a segfault due to missing records.
Add a test to catch:
- Wrong sorting
- Seeking errors
- Iteration result not complete
ActivateBestChain uses chainActive after releasing the lock; reorder operations
to move all access to synchronized object into existing LOCK(cs_main) block.
A small GUI annoyance for me has always been that it's impossible to
have multiple transaction detail windows open, for example to compare
transactions.
This patch makes the window non-modal so that it is possible to open
transaction details at will.
869cf12 dbwrapper: Move `HandleError` to `dbwrapper_private` (Wladimir J. van der Laan)
b69836d dbwrapper: Pass parent CDBWrapper into CDBBatch and CDBIterator (Wladimir J. van der Laan)
878bf48 dbwrapper: Remove CDBWrapper::GetObfuscateKeyHex (Wladimir J. van der Laan)
74f7b12 dbwrapper: Remove throw keywords in function signatures (Wladimir J. van der Laan)
Pass parent wrapper directly instead of obfuscation key. This
makes it possible for other databases which re-use this code
to use other properties from the database.
Add a namespace dbwrapper_private for private functions to be used
only in dbwrapper.h/cpp and dbwrapper_tests.
Using throw() specifications in function signatures is not only
not required in C++, it is considered deprecated for
[various reasons](https://stackoverflow.com/questions/1055387/throw-keyword-in-functions-signature).
It is not implemented by any of the common C++ compilers. The usage is
also inconsistent with the rest of the source code.
Without this patch:
- When I compile the GUI from the bitcoin directory itself, it works as
expected.
- When I build the GUI in an out-of-tree build, I cannot get it to
select tabs. When I click, say the "Receive" tab nothing happens,
the button selects but it doesn't switch the page. The rest - even
the debug window - seems to work.
See full discussion here:
https://github.com/bitcoin/bitcoin/pull/7911#issuecomment-212413442
This turned out to be caused by a mismatch in the arguments to moc,
preventing it from finding `bitcoin-config.h`. Fix this by passing
`$(DEFAULT_INCLUDES)` to it, which gets set to the appropriate
path by autoconf itself.
SetString seems to be passing the length of the wrong variable to
memory_cleanse, resulting in the last byte of the temporary buffer not being
securely erased.
This will avoid sending more pointless INVs around updates, and
prevents using filter updates to timetag transactions.
Also adds locking for fRelayTxes.
By eliminating queued entries from the mempool response and responding only at
trickle time, this makes the mempool no longer leak transaction arrival order
information (as the mempool itself is also sorted)-- at least no more than
relay itself leaks it.
Previously we would assert that if every block in vBlockHashesToAnnounce is in
chainActive, then the blocks to be announced must connect. However, there are
edge cases where this assumption could be violated (eg using invalidateblock /
reconsiderblock), so just check for this case and revert to inv-announcement
instead.
Rather than allowing CNetAddr/CService/CSubNet to launch DNS queries, require
that addresses are already resolved.
This greatly simplifies async resolve logic, and makes it harder to
accidentally leak DNS queries.
Note: Some seeds aren't actually returning an IP for their name entries, so
they're being added to addrman with a source of [::].
This commit shouldn't change that behavior, for better or worse.
Previously Bitcoin would send 1/4 of transactions out to all peers
instantly. This causes high overhead because it makes >80% of
INVs size 1. Doing so harms privacy, because it limits the
amount of source obscurity a transaction can receive.
These randomized broadcasts also disobeyed transaction dependencies
and required use of the orphan pool. Because the orphan pool is
so small this leads to poor propagation for dependent transactions.
When the bypass wasn't in effect, transactions were sent in the
order they were received. This avoided creating orphans but
undermines privacy fairly significantly.
This commit:
Eliminates the bypass. The bypass is replaced by halving the
average delay for outbound peers.
Sorts candidate transactions for INV by their topological
depth then by their feerate (then hash); removing the
information leakage and providing priority service to
higher fee transactions.
Limits the amount of transactions sent in a single INV to
7tx/sec (and twice that for outbound); this limits the
harm of low fee transaction floods, gives faster relay
service to higher fee transactions. The 7 sounds lower
than it really is because received advertisements need
not be sent, and because the aggregate rate is multipled
by the number of peers.
leveldb's buildsystem causes us a few problems:
- breaks out-of-tree builds
- forces flags used for some tools
- limits cross builds
Rather than continuing to add wrappers around it, simply integrate it into our
build.
b30fb42 test: Rename wallet.dat to wallet_test.dat (Wladimir J. van der Laan)
a25a4f5 wallet_ismine.h → script/ismine.h (Wladimir J. van der Laan)
f4eae2d test: Create test fixture for wallet (Wladimir J. van der Laan)
de39c95 test: move accounting_tests and rpc_wallet_tests to wallet/test (Wladimir J. van der Laan)
28b400f doc: update release-notes for `gettxoutsetinfo` change (Wladimir J. van der Laan)
76212bb rpc: make sure `gettxoutsetinfo` hash has txids (Wladimir J. van der Laan)
9ad1a51 crypto: bytes counts are 64 bit (Wladimir J. van der Laan)
Remove the mistaken assumption that GetKey returning false signifies
an internal database issue. It will return false when the key cannot
be deserialized into the (char,uint256) stanza, which indicates
that the cursor has reached a different kind of key.
Fixes bug #7890 introduced in #7756.
Without the newline I see "bein" where the two lines are concatenated:
Note that all inputs selected must be of standard form and P2SH scripts must *bein* the wallet using importaddress or addmultisigaddress (to calculate fees).
swap was using an incorrect condition to determine when to apply an optimization
(not swapping the full direct[] when swapping two indirect prevectors).
Rather than correct the optimization I'm removing it for simplicity. Removing
this optimization minutely improves performance in the typical (currently only)
usage of member swap(), which is swapping with a freshly value-initialized
object.
Fixes a bug in which pop_back did not call the deleted item's destructor.
Using the most general erase() implementation to implement all the others
prevents similar bugs because the coupling between deallocation and destructor
invocation only needs to be maintained in one place.
Also reduces duplication of complex memmove logic.
The key (transaction id for the following outputs) should be serialized
to the HashWriter.
This is a problem as it means different transactions in the same
position with the same outputs will potentially result in the same hash.
Fixes primary concern of #7758.
Break the circular dependency between main and txdb by:
- Moving `CBlockFileInfo` from `main.h` to `chain.h`. I think this makes
sense, as the other block-file stuff is there too.
- Moving `CDiskTxPos` from `main.h` to `txdb.h`. This type seems
specific to txdb.
- Pass a functor `insertBlockIndex` to `LoadBlockIndexGuts`. This leaves
it up to the caller how to insert block indices.
Byte counts for SHA256, SHA512, SHA1 and RIPEMD160 must be 64 bits.
`size_t` has a different size per platform, causing divergent results
when hashing more than 4GB of data.
Add a method Cursor() to CCoinsView that returns a cursor which can be
used to iterate over the whole UTXO set.
- rpc: Change gettxoutsetinfo to use new Cursor method
- txdb: Remove GetStats method - Now that GetStats is implemented in
terms of Cursor, remove it.
dde46d3 Merge script_valid and script_invalid tests (Pieter Wuille)
009b503 Get rid of expect in script_tests as it's implied by scripterror (Pieter Wuille)
76da761 Make script_error a mandatory 4th field for script_tests (Pieter Wuille)
269281b Fix some misconstructed tests (Pieter Wuille)
d03e466 Fix formatting of NOPs for generated script tests (Pieter Wuille)
c7c6641 Fix JSON pretty printing in script_tests (Pieter Wuille)
d12760b rpc-tests: handle KeyError nicely in test_framework.py (Rusty Russell)
85c807c getblockchaininfo: make bip9_softforks an object, not an array. (Rusty Russell)
We can't change "softforks", but it seems far more logical to use tags
in an object rather than using an "id" field in an array.
For example, to get the csv status before, you need to iterate the
array to find the entry with 'id' field equal to "csv":
jq '.bip9_softforks | map(select(.id == "csv"))[] | .status'
Now:
jq '.bip9_softforks.csv.status'
There is no issue with fork names being incompatible with JSON tags,
since we're selecting them ourselves.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previously we used the CInv that would be sent to the peer announcing the
transaction as the key, but using the txid instead allows us to decouple the
p2p layer from the application logic (which relies on this map to avoid
duplicate tx requests).
The lockorder potential deadlock detection works by remembering for each
lock A that is acquired while holding another B the pair (A,B), and
triggering a warning when (B,A) already exists in the table.
A and B in the above text are represented by pointers to the CCriticalSection
object that is acquired. This does mean however that we need to clean up the
table entries that refer to any critical section which is destroyed, as it
memory address can potentially be used for another unrelated lock in the future.
Implement this clean up by remembering not only the pairs in forward direction,
but also backward direction. This allows for fast iteration over all pairs that
use a deleted CCriticalSection in either the first or the second position.
The current tests for varint only check that
serialization-deserialization is a roundtrip. That is a useful test, but
it is also good to check for some exact bit patterns, to prevent a code
change that changes the serialization format from going undetected.
As the varint functions are templated, also check with different types.
da5fdbb Test relay of version 2 transactions (Suhas Daftuar)
5cb1d8a Tests: move get_bip9_status to util.py (Suhas Daftuar)
e4ba9f6 Version 2 transactions remain non-standard until CSV activates (Suhas Daftuar)
Currently, we're keeping a timeout for each requested block, starting
from when it is requested, with a correction factor for the number of
blocks in the queue.
That's unnecessarily complicated and inaccurate.
As peers process block requests in order, we can make the timeout for each
block start counting only when all previous ones have been received, and
have a correction based on the number of peers, rather than the total number
of blocks.
Two-line patch to make it possible to shut down bitcoind cleanly during
the initial ActivateBestChain.
Fixes#6459 (among other complaints).
To reproduce:
- shutdown bitcoind
- copy chainstate
- start bitcoind
- let the chain sync a bit
- shutdown bitcoind
- copy back old chainstate
- start bitcoind
- bitcoind will catch up with all blocks during Init()
(the `boost::this_thread::interruption_point` / `ShutdownRequested()`
dance is ugly, this should be refactored all over bitcoind at some point
when moving from boost::threads to c++11 threads, but it works...)
They claimed to be testing P2SH scripts with non-push scriptSigs, but
1) they were not enabling P2SH
2) they have push-only scriptSigs
Fix this, and add a few more related cases.
Split out methods to every module, apart from 'help' and 'stop' which
are implemented in rpcserver.cpp itself.
- This makes it easier to add or remove RPC commands - no longer everything that includes
rpcserver.h has to be rebuilt when there's a change there.
- Cleans up `rpc/server.h` by getting rid of the huge cluttered list of function definitions.
- Removes most of the bitcoin-specific code from rpcserver.cpp and .h.
Continues #7307 for the non-wallet.
Ubuntu 16.04 "xenial xerus" does not come with Python 2.x by default.
It is possible to install a python-2.7 package, but this has its own
problem: no `python` or `python2` symlink (see #7717).
This fixes the following scripts to work with python 3:
- `make check` (bctest,py, bitcoin-util-test.py)
- `make translate` (extract_strings_qt.py)
- `make symbols-check` (symbol-check.py)
- `make security-check` (security-check.py)
Explicitly call the python commands using $(PYTHON) instead
of relying on the interpreter line at the top of the scripts.
The build date does only makes sense for custom/self-compiled bitcoin-core versions because we are using static build-dates for our deterministic release builds.
Having a quick option to get the current datadir is much more valuable for debug purposes.
The "feefilter" p2p message is used to inform other nodes of your mempool min fee which is the feerate that any new transaction must meet to be accepted to your mempool. This will allow them to filter invs to you according to this feerate.
Creates the generatetoaddress rpc which is virtually identical to the generate rpc except that it takes an argument for the address to mine to. It does not rely on wallet functionality.
The mining code shared by generate and generatetoaddress has been moved to another method to reduce duplication.
fad8cfb [qa] mininode: Add and use CONSTs (MarcoFalke)
fa8cd46 [qa] Move create_tx() to util.py (MarcoFalke)
fad7dc8 [qa] wallet: speed up tests (MarcoFalke)
fa3a81a [tests] Extend util_ParseMoney test case (MarcoFalke)
This implements caching of ancestor state to each mempool entry, similar to
descendant tracking, but also including caching sigops-with-ancestors (as that
metric will be helpful to future code that implements better transaction
selection in CreatenewBlock).
The work limit served to prevent the descendant walking algorithm from doing
too much work by marking the parent transaction as dirty. However to implement
ancestor tracking, it's not possible to similarly mark those descendant
transactions as dirty without having to calculate them to begin with.
This commit removes the work limit altogether. With appropriate
chain limits (-limitdescendantcount) the concern about doing too much
work inside this function should be mitigated.
While trying to find a black/white version of the Bitcoin
logo for the organization I noticed the about.png is not
entirely black - it has some reflection. Remove this to make
it the same as other icons.
Also ran the icons through `contrib/devtools/optimize-pngs.py`,
so `chevron.png` was optimized too.
0ecb340 test: Script_error checking in script_invalid tests (Wladimir J. van der Laan)
2317ad7 test: Re-introduce JSON pretty printing in test builder (Wladimir J. van der Laan)
b0ff857 test: Move non-generated script_invalid test to the correct place (Wladimir J. van der Laan)
It looks like, TorController::disconnected_cb(TorControlConnection&
conn) gets called multiple times which results in multiple event_new().
Avoid this by creating the event only once in the constructore, and
deleting it only once in the destructor (thanks to Cory Fields for the
idea).
Replaces the fix by Jonas Schnelli in #7610, see discussion there.
Continues "Make logging for validation optional" from #6519.
The idea there was to remove all ERROR logging of rejected transaction,
and move it to one message in the class 'mempoolrej' which logs the
state message (and debug info). The superfluous ERRORs in the log
"terrify" users, see for example issue #5794.
Unfortunately a lot of new logging was introduced in #6871 (RBF) and
#7287 (misc refactoring). This pull updates that new code.
f22f14c doc: mention bitcoin-cli -stdin in release notes (Wladimir J. van der Laan)
92bcca3 rpc: Input-from-stdin mode for bitcoin-cli (Wladimir J. van der Laan)
Implements #7442 by adding an option `-stdin` which reads
additional arguments from stdin, one per line.
For example
```bash
echo -e "mysecretcode\n120" | src/bitcoin-cli -stdin walletpassphrase
echo -e "walletpassphrase\nmysecretcode\n120" | src/bitcoin-cli -stdin
```
BerkeleyDB dump files have key and value lines indented.
The salvage code passes these to ParseHex as-is.
Check this in the tests (should just pass with current code).
Check for EOF before every getline, and warn when reading gets to EOF
before the end of the data.
Stricter error checking could shed more light on issues such as #7463
and #7379.
- Replace NOP3 with CHECKSEQUENCEVERIFY (BIP112)
<nSequence> CHECKSEQUENCEVERIFY -> <nSequence>
- Fails if txin.nSequence < nSequence, allowing funds of a txout to be locked for a number of blocks or a duration of time after its inclusion in a block.
- Pull most of CheckLockTime() out into VerifyLockTime(), a local function that will be reused for CheckSequence()
- Add bitwise AND operator to CScriptNum
- Enable CHECKSEQUENCEVERIFY as a standard script verify flag
- Transactions that fail CSV verification will be rejected from the mempool, making it easy to test the feature. However blocks containing "invalid" CSV-using transactions will still be accepted; this is *not* the soft-fork required to actually enable CSV for production use.
Check the returned script_error. Add expected script_error
for generated as well as custom tests.
The specific error is not part of consensus, however
it could avoid unclear reporting issues such as #6862 in the future.
Fixes#7513.
SequenceLocks functions are used to evaluate sequence lock times or heights per BIP 68.
The majority of this code is copied from maaku in #6312
Further credit: btcdrak, sipa, NicolasDorier
